From noreply at macports.org Sun Jun 1 01:17:56 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 08:17:56 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.a48abcd503fcb09bb0c241ab204c5c11@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by mike at it-loops.com): Just a heads up. The problem is still there with the new pango version (1.21.1_0+no_x11). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 01:21:35 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 08:21:35 -0000 Subject: [MacPorts] #14761: Cannot build proctools on Leopard In-Reply-To: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> References: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> Message-ID: <063.8b841cac648ee7b39808beb4c679d6e0@macports.org> #14761: Cannot build proctools on Leopard ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: akira at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: leopard proctools kvm ---------------------------------+------------------------------------------ Comment (by simmel at soy.se): Maybe if you hack the C-code, but I don't know C I'm afraid. The reason why it's needed is because, if I understood it correctly, they removed /dev/kmem completely in Leopard. While writing this message I started to hack at it, and I belive I can get it working, I will send in another diff for you to try. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 02:27:35 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 09:27:35 -0000 Subject: [MacPorts] #14761: Cannot build proctools on Leopard In-Reply-To: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> References: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> Message-ID: <063.7a3bdcf2e6bef08dbad6bb62998444dc@macports.org> #14761: Cannot build proctools on Leopard ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: akira at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: leopard proctools kvm ---------------------------------+------------------------------------------ Comment (by simmel at soy.se): Try that akira. It works for me(TM). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 04:12:37 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 11:12:37 -0000 Subject: [MacPorts] #15447: inkscape: configure fails to recognize presence of ImageMagick In-Reply-To: <054.da040e0870e63f1992be6a760cfb03d1@macports.org> References: <054.da040e0870e63f1992be6a760cfb03d1@macports.org> Message-ID: <063.00b78772b0d1d7b38e18f8e32802f9ce@macports.org> #15447: inkscape: configure fails to recognize presence of ImageMagick ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: inkscape ImageMagick raster effects ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: jmr at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 04:16:08 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 11:16:08 -0000 Subject: [MacPorts] #15447: inkscape: configure fails to recognize presence of ImageMagick In-Reply-To: <054.da040e0870e63f1992be6a760cfb03d1@macports.org> References: <054.da040e0870e63f1992be6a760cfb03d1@macports.org> Message-ID: <063.fe70d81cd6736fc37ef02541cb9d6112@macports.org> #15447: inkscape: configure fails to recognize presence of ImageMagick ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: inkscape ImageMagick raster effects ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed in r37259. Thanks for stepping up as maintainer! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 05:13:57 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 12:13:57 -0000 Subject: [MacPorts] #15471: gri update to version 2.12.17 Message-ID: <053.6e4746f427876edfb366816658e22145@macports.org> #15471: gri update to version 2.12.17 -------------------------------+-------------------------------------------- Reporter: Dan.Kelley at Dal.Ca | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- Update to gri version 2.12.17. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 06:30:55 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 13:30:55 -0000 Subject: [MacPorts] #15472: rsync-3.0.2 should fully preserve Mac OS X metadata Message-ID: <052.ed08065127ce157cd89b8fb19a6f2f69@macports.org> #15472: rsync-3.0.2 should fully preserve Mac OS X metadata ------------------------------+--------------------------------------------- Reporter: css at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | ------------------------------+--------------------------------------------- The rsync port does not include a couple essential patches that preserve Mac OS X metadata. See [http://www.bombich.com/mactips/rsync.html Mike Bombich's instructions] to find that there are two patches. * fileflags.diff preserves Finder flags. * crtimes.diff preserves file creation dates. The port should provide a variant to support these patches. Adding them as a regular variant rather than a platform-specific variant should allow supporting these attributes when using the port on non-darwin systems. Ideally, the port could: * Fetch the official patches archive: http://rsync.samba.org/ftp/rsync /rsync-patches-3.0.2.tar.gz * Apply the two patches * Fully support Mac OS X metadata backups! Unfortunately, I'm not entirely clear on the best way to do this in terms of the Portfile. The quick and dirty approach is to grab those patches and directly put them into the port's folder. It might be nice to directly use the official archive in the event that future patches are deemed useful. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 06:52:46 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 13:52:46 -0000 Subject: [MacPorts] #15471: gri update to version 2.12.17 In-Reply-To: <053.6e4746f427876edfb366816658e22145@macports.org> References: <053.6e4746f427876edfb366816658e22145@macports.org> Message-ID: <062.3a10f03eadfca576b5a979fc42098d70@macports.org> #15471: gri update to version 2.12.17 --------------------------------+------------------------------------------- Reporter: Dan.Kelley at Dal.Ca | Owner: jmr at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned * milestone: => Port Updates -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 06:53:01 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 13:53:01 -0000 Subject: [MacPorts] #15472: rsync-3.0.2 should fully preserve Mac OS X metadata In-Reply-To: <052.ed08065127ce157cd89b8fb19a6f2f69@macports.org> References: <052.ed08065127ce157cd89b8fb19a6f2f69@macports.org> Message-ID: <061.455957b3c39115123d442096028f283c@macports.org> #15472: rsync-3.0.2 should fully preserve Mac OS X metadata -------------------------------+-------------------------------------------- Reporter: css at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by css at macports.org): Here's an identifiable ''desired outcome'' for this patch: The MacPorts rsync port passes the [http://www.n8gray.org/code/backup-bouncer/ Backup Bouncer] test. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 06:54:25 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 13:54:25 -0000 Subject: [MacPorts] #15471: gri update to version 2.12.17 In-Reply-To: <053.6e4746f427876edfb366816658e22145@macports.org> References: <053.6e4746f427876edfb366816658e22145@macports.org> Message-ID: <062.a9a545d8107e9307d2cf30d36d8beae5@macports.org> #15471: gri update to version 2.12.17 --------------------------------+------------------------------------------- Reporter: Dan.Kelley at Dal.Ca | Owner: jmr at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Thanks, committed in r37261. (BTW, your patch was reversed.) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 07:19:01 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 14:19:01 -0000 Subject: [MacPorts] #15473: inventor fails to link on Leopard Message-ID: <052.ac2d154e5e55df122881fdbb7461474a@macports.org> #15473: inventor fails to link on Leopard ------------------------------+--------------------------------------------- Reporter: css at macports.org | Owner: css at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | ------------------------------+--------------------------------------------- According to email, the Open Inventor port fails to link when building on Mac OS X Leopard: {{{ bash-3.2# port install inventor +imagelib ---> Building inventor with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_inventor/work/inventor" && make all " returned error 2 Command output: make[1]: Nothing to be done for `all'. /usr/bin/g++ -L/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_inventor/work/destroot//opt/local/lib -bind_at_load -multiply_defined suppress -L/usr/X11R6/lib -L/opt/local/lib ppp.o -lm -lXm -lXt -lX11 -lGLU -lGL -liconv -ldl -o ppp ld: cycle in dylib re-exports with /usr/X11R6/lib/libGL.dylib collect2: ld returned 1 exit status make[2]: *** [ppp] Error 1 make[1]: *** [all] Error 1 make: *** [all] Error 1 }}} Apple's [http://developer.apple.com/qa/qa2007/qa1567.html QA1567] indicates that this error results from finding duplication OpenGL libraries. Consider adding the following line to the linker command: {{{ -dylib_file \ /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib:\ /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib }}} Due to the way that the port builds, this change might require diving into the complex series of patches. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 08:35:15 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 15:35:15 -0000 Subject: [MacPorts] #15113: i386-elf-gcc will not build In-Reply-To: <058.64b285a52d9f3ee5d50dc00aa174dd48@macports.org> References: <058.64b285a52d9f3ee5d50dc00aa174dd48@macports.org> Message-ID: <067.55d15cf37e55500c3c27229c4c3b9666@macports.org> #15113: i386-elf-gcc will not build -------------------------------------+-------------------------------------- Reporter: TimothyC.Lee at gmail.com | Owner: pguyot at kallisys.net Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------------+-------------------------------------- Comment (by gabriel.adrian.radu at gmail.com): I am having the same problem building i386-elf-gcc. Would anyone know a work around this problem? Thank you in advance. Here is what I am getting from '''sudo /opt/local/bin/port install i386 -elf-gcc''' : ---> Building i386-elf-binutils with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/build" && make all " returned error 2 Command output: am__cwd=`pwd` && cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc && \ rm -rf $backupdir && mkdir $backupdir && \ for f in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc/i386-elf-bfd.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc/i386-elf-bfd.info-[0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc/i386-elf-bfd.info-[0-9][0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc/i386-elf-bfd.i[0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc/i386-elf-bfd.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ cd "$am__cwd"; \ if /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/missing makeinfo --split-size=5000000 --split-size=5000000 -I /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc \ -o /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc/i386-elf-bfd.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc/i386-elf-bfd.texinfo; \ then \ rc=0; \ cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc; \ else \ rc=$?; \ cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc && \ $restore $backupdir/* `echo ".//opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc/i386-elf-bfd.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc WARNING: `makeinfo' is missing on your system. You should only need it if you modified a `.texi' or `.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy `make' (AIX, DU, IRIX). You might want to install the `Texinfo' package or the `GNU make' package. Grab either from any GNU archive site. make[3]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386 -elf-binutils/work/binutils-2.17/bfd/doc/i386-elf-bfd.info] Error 1 Making info in po make[3]: Nothing to be done for `info'. make[3]: Nothing to be done for `info-am'. make[2]: *** [info-recursive] Error 1 make[1]: *** [all-bfd] Error 2 make: *** [all] Error 2 Error: The following dependencies failed to build: i386-elf-binutils Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 09:14:25 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 16:14:25 -0000 Subject: [MacPorts] #15474: port upgrade: www/shttpd 1.34 -> 1.41 Message-ID: <053.edd8cd0478f30ebc2bb3869db5ca6ce4@macports.org> #15474: port upgrade: www/shttpd 1.34 -> 1.41 -------------------------------+-------------------------------------------- Reporter: valenok at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 09:52:22 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 16:52:22 -0000 Subject: [MacPorts] #11759: BUG: case-sensitive port uninstall In-Reply-To: <057.05b84e956a5a63148034c136dcfb3720@macports.org> References: <057.05b84e956a5a63148034c136dcfb3720@macports.org> Message-ID: <066.e085a98901743bd8515580dc582a8734@macports.org> #11759: BUG: case-sensitive port uninstall ------------------------------------+--------------------------------------- Reporter: yunzheng.hu at gmail.com | Owner: eridius at macports.org Type: defect | Status: assigned Priority: High | Milestone: MacPorts 1.6.1 Component: base | Version: Resolution: | Keywords: port uninstall case-sensitive ------------------------------------+--------------------------------------- Changes (by jmr at macports.org): * cc: yunzheng.hu at gmail.com, eridius at macports.org (removed) * cc: jmr at macports.org, raimue at macports.org (added) Comment: Attached a new patch which I think is the right way to fix this. The most important part is that registry::installed now always returns the port name with canonical case. This alone would fix the deactivation bug. The rest of the patch is making sure that correctly-cased port names are used in a bunch of places where previously it could have been whatever the user typed in. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 12:58:55 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 19:58:55 -0000 Subject: [MacPorts] #15465: p5-sdl_perl missing dependencies In-Reply-To: <054.7d215cb1a2311e05d5d7da5c9e3c23a1@macports.org> References: <054.7d215cb1a2311e05d5d7da5c9e3c23a1@macports.org> Message-ID: <063.48e808063bd5235715b50acec4c40a4c@macports.org> #15465: p5-sdl_perl missing dependencies ---------------------------------+------------------------------------------ Reporter: mellon85 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by sethk at meowfishies.com): Please try the patch attached to http://trac.macports.org/ticket/13854 . It's possible that this can be marked as duplicate. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 15:01:01 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 22:01:01 -0000 Subject: [MacPorts] #15475: py25-pylons 0.9.6.1 additional dependencies Message-ID: <052.88d40d8403c5aea60575ec062e3dca9a@macports.org> #15475: py25-pylons 0.9.6.1 additional dependencies ------------------------------+--------------------------------------------- Reporter: pyrios at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------+--------------------------------------------- After a fresh Mac Ports install and fresh pylons install, tried to create a plyon's project which failed because of missing runtime dependencies. A complete example is included below. mako >= 0.1.8 decorator>=2.1.0 I installed mako, but the most recent version of decorator is 2.0.1. So that needs to be upgraded as well. macbook-pro-15:example_pylons georgedowding$ paster create -t pylons example Traceback (most recent call last): File "/opt/local/bin/paster", line 8, in load_entry_point('PasteScript==1.6.2', 'console_scripts', 'paster')() File "/opt/local/lib/python2.5/site-packages/paste/script/command.py", line 79, in run invoke(command, command_name, options, args[1:]) File "/opt/local/lib/python2.5/site-packages/paste/script/command.py", line 118, in invoke exit_code = runner.run(args) File "/opt/local/lib/python2.5/site-packages/paste/script/command.py", line 213, in run result = self.command() File "/opt/local/lib/python2.5/site- packages/paste/script/create_distro.py", line 69, in command self.extend_templates(templates, tmpl_name) File "/opt/local/lib/python2.5/site- packages/paste/script/create_distro.py", line 233, in extend_templates tmpl = entry.load()(entry.name) File "/opt/local/lib/python2.5/site-packages/pkg_resources.py", line 1911, in load if require: self.require(env, installer) File "/opt/local/lib/python2.5/site-packages/pkg_resources.py", line 1924, in require working_set.resolve(self.dist.requires(self.extras),env,installer)) File "/opt/local/lib/python2.5/site-packages/pkg_resources.py", line 524, in resolve raise DistributionNotFound(req) # XXX put more info here pkg_resources.DistributionNotFound: Mako>=0.1.8 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 15:02:45 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 22:02:45 -0000 Subject: [MacPorts] #15476: The following dependencies failed to build: py25-hashlib python25 Message-ID: <049.20f55f2a0cec0ace5cb7bc25cc3414f6@macports.org> #15476: The following dependencies failed to build: py25-hashlib python25 ---------------------------+------------------------------------------------ Reporter: ewira at free.fr | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ---------------------------+------------------------------------------------ '''hello this is what i have obtained when updated outdated ports:''' {{{ PowerPop:/Users/popop will$ port outdated The following installed ports are outdated: iso-codes 1.4_0 < 2.0_0 PowerPop:/Users/popop will$ sudo port upgrade outdated ---> Building python25 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2" && make all " returned error 1 Command output: sh: line 1: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2: No such file or directory Error: The following dependencies failed to build: python25 ---> Building python25 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2" && make all " returned error 1 Command output: sh: line 1: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2: No such file or directory ---> Building python25 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2" && make all " returned error 1 Command output: sh: line 1: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2: No such file or directory Error: The following dependencies failed to build: py25-hashlib python25 Error: Unable to upgrade port: 1 }}} '''Before this oudated command, I have tried to install gnumeric and obtained the following, after several attempt:''' {{{ PowerPop:/Users/popop will$ sudo port install gnumeric ---> Building python25 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2" && make all " returned error 1 Command output: sh: line 1: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2: No such file or directory Error: The following dependencies failed to build: gnome-doc-utils py25-gobject python25 py25-hashlib py25-libxml2 py25-numeric rarian intltool gnome-common goffice libgnomeprintui gnome-icon-theme hicolor- icon-theme icon-naming-utils p5-getopt-long p5-pathtools p5-xml-simple p5 -xml-namespacesupport p5-xml-sax libgnomecanvas gail libart_lgpl libglade2 libgnomeprint bison m4 libgnomecups popt libgsf gnome-vfs desktop-file- utils gconf orbit2 libidl gnome-mime-data libbonobo pcre py25-gtk py25-cairo py25-numpy fftw-3 g95 odcctools subversion apr apr-util db44 sqlite3 gawk gmake readline neon Error: Status 1 encountered during processing. }}} '''my setup:''' {{{ PowerPop:/Users/popop will$ sw_vers ProductName: Mac OS X ProductVersion: 10.4.11 BuildVersion: 8S165 PowerPop:/Users/popop will$ uname -a Darwin PowerPop.local 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh powerpc PowerPop:/Users/popop will$ port version Version: 1.600 }}} Xcode = 2.5 anyone could help me as I would like to install gnumeric... Thanks in advance, and for the macport team, MacPorts is really nice... Will -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 15:38:13 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 22:38:13 -0000 Subject: [MacPorts] #15465: p5-sdl_perl missing dependencies In-Reply-To: <054.7d215cb1a2311e05d5d7da5c9e3c23a1@macports.org> References: <054.7d215cb1a2311e05d5d7da5c9e3c23a1@macports.org> Message-ID: <063.648a2d4a541ab180d6d07fd739a48777@macports.org> #15465: p5-sdl_perl missing dependencies ---------------------------------+------------------------------------------ Reporter: mellon85 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by mellon85 at gmail.com): Replying to [comment:2 sethk at meowfishies.com]: > Please try the patch attached to http://trac.macports.org/ticket/13854 . It's possible that this can be marked as duplicate. This patch does solves the problem, it can be marked as dup -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 15:58:22 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 22:58:22 -0000 Subject: [MacPorts] #11759: BUG: case-sensitive port uninstall In-Reply-To: <057.05b84e956a5a63148034c136dcfb3720@macports.org> References: <057.05b84e956a5a63148034c136dcfb3720@macports.org> Message-ID: <066.79aaf042185cd039892ad731da61dcf1@macports.org> #11759: BUG: case-sensitive port uninstall ------------------------------------+--------------------------------------- Reporter: yunzheng.hu at gmail.com | Owner: eridius at macports.org Type: defect | Status: assigned Priority: High | Milestone: MacPorts 1.6.1 Component: base | Version: Resolution: | Keywords: port uninstall case-sensitive ------------------------------------+--------------------------------------- Comment (by raimue at macports.org): Your patch looks much better! With this patch applied, the testcase in [browser:trunk/base/tests/test /case-insensitive-deactivate] passes. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 16:03:05 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 23:03:05 -0000 Subject: [MacPorts] #15446: teTeX 3.0_5 activation failed In-Reply-To: <058.35465daadadecd1cf03942732953bcc7@macports.org> References: <058.35465daadadecd1cf03942732953bcc7@macports.org> Message-ID: <067.32d1ad7d36292c594ae8a63ac81941b3@macports.org> #15446: teTeX 3.0_5 activation failed -------------------------------------+-------------------------------------- Reporter: jmstephensjr at gmail.com | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: teTeX octave -------------------------------------+-------------------------------------- Comment (by jmstephensjr at gmail.com): Replying to [comment:1 jmr at macports.org]: > I think this is a problem with the octave port. It lists three dependencies on bin:tex:$whatever, and consequently tries to install teTeX, texlive and pTeX, which as you discovered is impossible. It should list only one port for the TeX dependency, preferably bin:tex:texlive. > > For an immediate workaround, I'd recommend uninstalling teTeX and pTeX and then installing texlive. Then you can try installing octave again, and since TeX will be present from the start of the process, the dependencies will all register as being fulfilled and it should work. As suggested, I uninstalled/cleaned all flavors of TeX in my macports directory. I then installed texlive. I then installed octave. Everything seems OK. Many thanks. -- James -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 16:25:04 2008 From: noreply at macports.org (MacPorts) Date: Sun, 01 Jun 2008 23:25:04 -0000 Subject: [MacPorts] #15446: teTeX 3.0_5 activation failed In-Reply-To: <058.35465daadadecd1cf03942732953bcc7@macports.org> References: <058.35465daadadecd1cf03942732953bcc7@macports.org> Message-ID: <067.0fc31791253bafe87fd5f144de33f008@macports.org> #15446: teTeX 3.0_5 activation failed -------------------------------------+-------------------------------------- Reporter: jmstephensjr at gmail.com | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: teTeX octave -------------------------------------+-------------------------------------- Comment (by alakazam at melix.net): Sorry for missing this issue. I believe that jmr's revision 37228 should fix this bug ; I am currently attempting to build {{{texlive}}} (but am encountering difficulties ; that will be for another ticket). I agree that having multiple dependencies for the {{{tex}}} binary is evil. However, I think that keeping the {{{pTeX}}} dependency was explicitly requested when upgrading the {{{octave}}} port recently ; is it possible to handle multiple ports providing the same dependencies without resorting to variants ? I would imagine that the answer is no, which would mean I need to add a variant for {{{pTeX}}} so as to avoid the difficulties encountered in this ticket, and at the same time allow japanese {{{octave}}}?users to rely on {{{pTeX}}}?instead of {{{texlive}}}. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 17:15:19 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 00:15:19 -0000 Subject: [MacPorts] #15465: p5-sdl_perl missing dependencies In-Reply-To: <054.7d215cb1a2311e05d5d7da5c9e3c23a1@macports.org> References: <054.7d215cb1a2311e05d5d7da5c9e3c23a1@macports.org> Message-ID: <063.4619a660291d40ddd67a5f278d63e432@macports.org> #15465: p5-sdl_perl missing dependencies ---------------------------------+------------------------------------------ Reporter: mellon85 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: ---------------------------------+------------------------------------------ Changes (by raimue at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #13854. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 17:19:13 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 00:19:13 -0000 Subject: [MacPorts] #15461: wine build failure with openssl 0.9.8h In-Reply-To: <059.a45ba567c3cdfc8b66f64dc8891de345@macports.org> References: <059.a45ba567c3cdfc8b66f64dc8891de345@macports.org> Message-ID: <068.11cb6bc14ca0984f104cce24a1153293@macports.org> #15461: wine build failure with openssl 0.9.8h --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: r37272: Applied a patch from the upstream ticket to allow building with openssl 0.9.8h. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 17:35:14 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 00:35:14 -0000 Subject: [MacPorts] #13854: p5-sdl_perl: library not found for -lSDL_ttf In-Reply-To: <060.246e0da3cdb159f3dc38badbd3dcc36b@macports.org> References: <060.246e0da3cdb159f3dc38badbd3dcc36b@macports.org> Message-ID: <069.09cecc864cfe5073ecc3214d8ac54147@macports.org> #13854: p5-sdl_perl: library not found for -lSDL_ttf ---------------------------------------+------------------------------------ Reporter: lisfolks.lists at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ---------------------------------------+------------------------------------ Changes (by raimue at macports.org): * status: new => closed * resolution: => fixed Comment: Committed with small change in r37273. I incremented the revision number as this changes the dependencies of the port. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 17:42:23 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 00:42:23 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 Message-ID: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> #15477: tex/rubber: use python25 ------------------------------+--------------------------------------------- Reporter: ram at macports.org | Owner: milosh at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | ------------------------------+--------------------------------------------- The attached patch updates tex/rubber to use python25. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 18:08:30 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 01:08:30 -0000 Subject: [MacPorts] #13854: p5-sdl_perl: library not found for -lSDL_ttf In-Reply-To: <060.246e0da3cdb159f3dc38badbd3dcc36b@macports.org> References: <060.246e0da3cdb159f3dc38badbd3dcc36b@macports.org> Message-ID: <069.3e57e303621c2cfe785bd1949da04479@macports.org> #13854: p5-sdl_perl: library not found for -lSDL_ttf ---------------------------------------+------------------------------------ Reporter: lisfolks.lists at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ---------------------------------------+------------------------------------ Comment (by sethk at meowfishies.com): Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 21:35:30 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 04:35:30 -0000 Subject: [MacPorts] #13000: wine build incompatible with iPhone SDK In-Reply-To: <054.659e1ffdfbecfef56c70462228d4728a@macports.org> References: <054.659e1ffdfbecfef56c70462228d4728a@macports.org> Message-ID: <063.2434e513a70777886096fc1e34a485e8@macports.org> #13000: wine build incompatible with iPhone SDK ---------------------------------+------------------------------------------ Reporter: tannhaus at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by ryandesign at macports.org): * summary: wine 0.9.47_0 won't compile with leopard => wine build incompatible with iPhone SDK Comment: Confirmed. wine doesn't build with iPhone SDK beta 5 or beta 6 installed (did not try earlier versions), builds fine with Xcode 3.0. I [http://bugs.winehq.org/show_bug.cgi?id=13601 filed a bug] with the wine developers. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 21:48:35 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 04:48:35 -0000 Subject: [MacPorts] #15462: rb-mysql 2.7.5_0 fails to build In-Reply-To: <052.a19676576318b50a151f79c697834bea@macports.org> References: <052.a19676576318b50a151f79c697834bea@macports.org> Message-ID: <061.9750ce3f2a520948460e5de31ceb75e2@macports.org> #15462: rb-mysql 2.7.5_0 fails to build -------------------------------+-------------------------------------------- Reporter: tyoshida at mac.com | Owner: febeling at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: rb-mysql -------------------------------+-------------------------------------------- Comment (by matthew at walker.wattle.id.au): I also had the same problem (still on 10.5.2) and independently arrived at a similar fix before coming here to report it and finding this ticket. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 22:00:39 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 05:00:39 -0000 Subject: [MacPorts] #14761: Cannot build proctools on Leopard In-Reply-To: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> References: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> Message-ID: <063.b6788103062788ff5c20bb5045401cd5@macports.org> #14761: Cannot build proctools on Leopard ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: akira at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: leopard proctools kvm ---------------------------------+------------------------------------------ Comment (by openspecies at gmail.com): Replying to [comment:6 simmel at soy.se]: > Try that akira. It works for me(TM). Hi Akira, patch the include in proctools.h (kvm.h remove it) and #define USE_SYSCTL a nicer way is: #ifdef __APPLE__ #include AvailabilityMacros.h Cheers! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 23:09:13 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 06:09:13 -0000 Subject: [MacPorts] #15475: py25-pylons 0.9.6.1 additional dependencies In-Reply-To: <052.88d40d8403c5aea60575ec062e3dca9a@macports.org> References: <052.88d40d8403c5aea60575ec062e3dca9a@macports.org> Message-ID: <061.ace64a96e13216f5f0eb2b3e38184a9a@macports.org> #15475: py25-pylons 0.9.6.1 additional dependencies -------------------------------+-------------------------------------------- Reporter: pyrios at gmail.com | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * cc: akira at macports.org (added) * owner: macports-tickets at lists.macosforge.org => stechert at macports.org * milestone: => Port Bugs Comment: Assigning to maintainers. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 1 23:14:29 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 06:14:29 -0000 Subject: [MacPorts] #15476: python25 build failure In-Reply-To: <049.20f55f2a0cec0ace5cb7bc25cc3414f6@macports.org> References: <049.20f55f2a0cec0ace5cb7bc25cc3414f6@macports.org> Message-ID: <058.b5708a99b013100a7c1da6497dab67d3@macports.org> #15476: python25 build failure ----------------------------+----------------------------------------------- Reporter: ewira at free.fr | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ----------------------------+----------------------------------------------- Changes (by jmr at macports.org): * summary: The following dependencies failed to build: py25-hashlib python25 => python25 build failure Comment: Python25 is failing to build because its work directory is missing and MacPorts thinks that it should be there. Try running `sudo port clean python25` to tell MacPorts to remove the work directory and thus match up its perception with reality. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 00:22:04 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 07:22:04 -0000 Subject: [MacPorts] #14761: Cannot build proctools on Leopard In-Reply-To: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> References: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> Message-ID: <063.175a5b673305ad256c5347f14cbb44f1@macports.org> #14761: Cannot build proctools on Leopard ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: akira at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: leopard proctools kvm ---------------------------------+------------------------------------------ Comment (by simmel at soy.se): Replying to [comment:7 openspecies at gmail.com]: > Replying to [comment:6 simmel at soy.se]: > > Try that akira. It works for me(TM). > > Hi Akira, patch the include in proctools.h (kvm.h remove it) > and > > #define USE_SYSCTL > > a nicer way is: > > #ifdef __APPLE__ > #include AvailabilityMacros.h > > > Cheers! Cool, much better patch than mine. To take it one step further, make -lkvm depend on USE_KVM too, but maybe that's not possible/very hard? Anyway, good work! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 00:24:57 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 07:24:57 -0000 Subject: [MacPorts] #15478: sqlite3 needn't depend on nawk Message-ID: <059.7c6f0f45b4ded83a8c3e2e9352a34ea2@macports.org> #15478: sqlite3 needn't depend on nawk -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- sqlite3 depends on nawk, but I don't know why. The dependency was added in r30720 but the log message is empty. I can only assume this was an early attempt to fix the [wiki:LeopardProblems Leopard environment variable issue], but we now know that adding a dependency on nawk is neither necessary () nor sufficient (#14523, #14938) to fix the problem. I just confirmed with Mac OS X 10.5.3, MacPorts trunk at 37255 and Xcode 3.1 (iPhone SDK beta 6) that sqlite3 3.5.9 builds just fine without the nawk dependency. I recommend it be removed, as in the attached patch. The log message for r30720 should also be fixed (`svn propedit --revprop -r30720 svn:log http://svn.macosforge.org/repository/macports/`). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 00:29:16 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 07:29:16 -0000 Subject: [MacPorts] #14938: sqlite3 3.5.7 build error: f: command not found In-Reply-To: <055.8af2dbf629e6a8ed4e6727658ff91762@macports.org> References: <055.8af2dbf629e6a8ed4e6727658ff91762@macports.org> Message-ID: <064.63e886a838a53b3385ea7c2ce971e8cc@macports.org> #14938: sqlite3 3.5.7 build error: f: command not found ----------------------------------+----------------------------------------- Reporter: rhwood at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: ----------------------------------+----------------------------------------- Changes (by ryandesign at macports.org): * cc: ryandesign at macports.org (added) Comment: Are you ''sure'' nawk is required? Because sqlite3 install just fine for me without nawk on Mac OS X 10.5.3 with Xcode 3.1 (iPhone SDK beta 6) and MacPorts trunk at 37255. It sounds like the [wiki:LeopardProblems Leopard environment variable issue], the fix for which is to clean the port and try again, as travis said in [comment:2 comment 2] sqlite3's dependency on gawk seems erroneous too. It works fine without it. I filed #15478 to remove it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 01:18:38 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 08:18:38 -0000 Subject: [MacPorts] #15462: rb-mysql 2.7.5_0 fails to build In-Reply-To: <052.a19676576318b50a151f79c697834bea@macports.org> References: <052.a19676576318b50a151f79c697834bea@macports.org> Message-ID: <061.481f345f5475a24832098f6429200b67@macports.org> #15462: rb-mysql 2.7.5_0 fails to build -------------------------------+-------------------------------------------- Reporter: tyoshida at mac.com | Owner: febeling at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: rb-mysql -------------------------------+-------------------------------------------- Comment (by febeling at macports.org): So if this is a recurring problem, then I will switch over to use the config binary. I used it for rubygems installation of mysql sometimes, and since rb-mysql's extconf.rb and mysql both provide means to negotiate the details of the libraries to use, there is no point in reproducing them in the port file again. I change the portfile then to that approach. I would still like too understand what goes wrong in these two cases. Could you post the mkmf.log file maybe, and the output from {{{ ls -la /opt/local/lib/libmys* }}} as well? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 02:11:50 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 09:11:50 -0000 Subject: [MacPorts] #15479: Can't edit revision properties Message-ID: <059.c6ab1c8f80b3e42acafb4f52cc6dfa1a@macports.org> #15479: Can't edit revision properties -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: wsiegrist at apple.com Type: defect | Status: new Priority: Normal | Milestone: Component: server/hosting | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- I can't seem to edit revision properties (like log messages) anymore. {{{ $ svn propedit --revprop -r32344 svn:log svn: DAV request failed; it's possible that the repository's pre-revprop- change hook either failed or is non-existent svn: At least one property change failed; repository is unchanged $ }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 02:13:39 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 09:13:39 -0000 Subject: [MacPorts] #15480: mpfr: enable parallel build Message-ID: <059.26a0f9f6aec4892227e2ef9d355bb4ff@macports.org> #15480: mpfr: enable parallel build -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: vinc17 at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- I think the parallel build feature should be enabled for mpfr. It works for me with buildmakejobs set to 2. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 02:45:58 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 09:45:58 -0000 Subject: [MacPorts] #15481: planet.macports.org Message-ID: <055.9d9608017347eba1c23b18c686588feb@macports.org> #15481: planet.macports.org ---------------------------------+------------------------------------------ Reporter: rhwood at macports.org | Owner: jmpp at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Website & Documentation Component: website | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ MacPorts should have a planet site not unlike planet.gnome.org or planet.fedora.org or any of the other project-related developer's blog feed aggregators out there. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 03:51:06 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 10:51:06 -0000 Subject: [MacPorts] #14713: Apache2 fails to install In-Reply-To: <058.30f2ecfeb12746786b7b3e8393857bcf@macports.org> References: <058.30f2ecfeb12746786b7b3e8393857bcf@macports.org> Message-ID: <067.6ca024375ea9f613663745df7f60f869@macports.org> #14713: Apache2 fails to install -------------------------------------+-------------------------------------- Reporter: sasha at theotheralex.com | Owner: imajes at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: apache2 -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #13066. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 06:03:35 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 13:03:35 -0000 Subject: [MacPorts] #14018: cssh fails lo load (Bus error) In-Reply-To: <057.90037df7c2429055d20c98e32817c2a3@macports.org> References: <057.90037df7c2429055d20c98e32817c2a3@macports.org> Message-ID: <066.c002ad5e2213c598eef03f8def8192d6@macports.org> #14018: cssh fails lo load (Bus error) ------------------------------------+--------------------------------------- Reporter: andrelop at andrelop.org | Owner: stechert at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Changes (by jonathan at vhata.net): * status: closed => reopened * resolution: fixed => Comment: Version 3.22 still gives a Bus Error for me, with latest Leopard updates (10.5.2) and Macports 1.600. According to http://www.nabble.com/ClusterSSH---Leopard-Fix- td14848155.html the cause is Macports Tk: $ /opt/local/bin/perl -e 'use Tk;' Bus error So, this is not resolved until Tk is fixed in Macports. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 06:07:27 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 13:07:27 -0000 Subject: [MacPorts] #14016: xterm-229 fails to compile (related to ticket #14000) In-Reply-To: <057.e904a7b47002259162d784b8aa5fcda8@macports.org> References: <057.e904a7b47002259162d784b8aa5fcda8@macports.org> Message-ID: <066.2dbc003fa658139999fddd84e1f220df@macports.org> #14016: xterm-229 fails to compile (related to ticket #14000) ------------------------------------+--------------------------------------- Reporter: andrelop at andrelop.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by jonathan at vhata.net): On 10.5.2 with the latest updates and the latest Macports (1.600) still gives me this error until the above patch is applied (Adding patch-xterm.h to /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xterm/files and adding a line to the Portfile to include that patch worked for me.) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 07:24:22 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 14:24:22 -0000 Subject: [MacPorts] #15462: rb-mysql 2.7.5_0 fails to build In-Reply-To: <052.a19676576318b50a151f79c697834bea@macports.org> References: <052.a19676576318b50a151f79c697834bea@macports.org> Message-ID: <061.6657e5c4f5e5c82633d7aba4fa3f2276@macports.org> #15462: rb-mysql 2.7.5_0 fails to build -------------------------------+-------------------------------------------- Reporter: tyoshida at mac.com | Owner: febeling at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: rb-mysql -------------------------------+-------------------------------------------- Changes (by febeling at macports.org): * status: assigned => closed * resolution: => fixed Comment: r37289 switches to use of mysq_config/mysql_config5. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 09:16:45 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 16:16:45 -0000 Subject: [MacPorts] #15482: Custom keyboard layouts and vim-app Message-ID: <054.d04519513faa503dad95826494324898@macports.org> #15482: Custom keyboard layouts and vim-app --------------------------------+------------------------------------------- Reporter: themolok at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- This is a very strange and annoying bug: I'm using a customized keyboard layout, when I open vim-app, the keyboard layout switches to the default one, even if I set my custom layout again, it stays there only until I come back to normal mode; so, everytime I enter normal mode, my keyboard layout changes for no reason and that's absolutely annoying. Furthermore, it seems like in OSX (I'm using Leopard, for the matter) I can't have a custom keyboard layout as the only one selected, so this workaround doesn't work. This happens with custom layouts (~/Library/Keyboard\ Layouts/) only. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 09:46:26 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 16:46:26 -0000 Subject: [MacPorts] #15479: Can't edit revision properties In-Reply-To: <059.c6ab1c8f80b3e42acafb4f52cc6dfa1a@macports.org> References: <059.c6ab1c8f80b3e42acafb4f52cc6dfa1a@macports.org> Message-ID: <068.ab95a382c2e0c5e29958fda79eedb037@macports.org> #15479: Can't edit revision properties --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: wsiegrist at apple.com Type: defect | Status: closed Priority: Normal | Milestone: Component: server/hosting | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by wsiegrist at apple.com): * status: new => closed * resolution: => fixed Comment: Fixed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 10:17:16 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 17:17:16 -0000 Subject: [MacPorts] #14761: Cannot build proctools on Leopard In-Reply-To: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> References: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> Message-ID: <063.d05f209ce1c02282b39a33089cb2e389@macports.org> #14761: Cannot build proctools on Leopard ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: akira at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: leopard proctools kvm ---------------------------------+------------------------------------------ Comment (by openspecies at gmail.com): Replying to [comment:8 simmel at soy.se]: > Replying to [comment:7 openspecies at gmail.com]: > > Replying to [comment:6 simmel at soy.se]: > > > Try that akira. It works for me(TM). > > > > Hi Akira, patch the include in proctools.h (kvm.h remove it) > > and > > > > #define USE_SYSCTL > > > > a nicer way is: > > > > #ifdef __APPLE__ > > #include AvailabilityMacros.h > > > > > > Cheers! > > Cool, much better patch than mine. To take it one step further, make -lkvm depend on USE_KVM too, but maybe that's not possible/very hard? > > Anyway, good work! yep I think that's possible, I only digg few minutes into proctools src, there are also some deprecated warnings from bsd.make, it's only a quick patch, anyway, it's perfectible using APPLE macro and the OS Version, no matter, :) THX -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 10:23:58 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 17:23:58 -0000 Subject: [MacPorts] #14761: Cannot build proctools on Leopard In-Reply-To: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> References: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> Message-ID: <063.956b5df83245e2e0c50c066d7e88bcff@macports.org> #14761: Cannot build proctools on Leopard ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: akira at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: leopard proctools kvm ---------------------------------+------------------------------------------ Comment (by openspecies at gmail.com): Replying to [comment:9 openspecies at gmail.com]: > Replying to [comment:8 simmel at soy.se]: > > Replying to [comment:7 openspecies at gmail.com]: > > > Replying to [comment:6 simmel at soy.se]: > > > > Try that akira. It works for me(TM). > > > > > > Hi Akira, patch the include in proctools.h (kvm.h remove it) > > > and > > > > > > #define USE_SYSCTL > > > > > > a nicer way is: > > > > > > #ifdef __APPLE__ > > > #include AvailabilityMacros.h > > > > > > > > > Cheers! > > > > Cool, much better patch than mine. To take it one step further, make -lkvm depend on USE_KVM too, but maybe that's not possible/very hard? > > > > Anyway, good work! > > yep I think that's possible, I only digg few minutes into proctools src, > there are also some deprecated warnings from bsd.make, it's only a quick patch, anyway, > it's perfectible using APPLE macro and the OS Version, no matter, :) THX > My last comment: proctools need a src maintainer, a request to the author should be the right answer. Cheers! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 10:58:33 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 17:58:33 -0000 Subject: [MacPorts] #15210: Idea: add Trac field for name of port In-Reply-To: <063.8a324f286e509f148d0948335822dbaa@macports.org> References: <063.8a324f286e509f148d0948335822dbaa@macports.org> Message-ID: <072.2ffa039e7c1cfa6a2cfabc75b517b784@macports.org> #15210: Idea: add Trac field for name of port ------------------------------------------+--------------------------------- Reporter: shreevatsa.public at gmail.com | Owner: wsiegrist at apple.com Type: enhancement | Status: assigned Priority: Normal | Milestone: Website & Documentation Component: server/hosting | Version: 1.6.0 Resolution: | Keywords: trac plugin port ------------------------------------------+--------------------------------- Comment (by raimue at macports.org): I think it would be nice to also display the list of maintainers as an read-only field once we get this. This will be useful for a quick check if the submitted patch comes from a maintainer and therefore can be committed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 11:13:10 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 18:13:10 -0000 Subject: [MacPorts] #15482: Custom keyboard layouts and vim-app In-Reply-To: <054.d04519513faa503dad95826494324898@macports.org> References: <054.d04519513faa503dad95826494324898@macports.org> Message-ID: <063.119832f30ade0549e6f2dac94324f70c@macports.org> #15482: Custom keyboard layouts and vim-app ---------------------------------+------------------------------------------ Reporter: themolok at gmail.com | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by raimue at macports.org): * owner: macports-tickets at lists.macosforge.org => raimue at macports.org * status: new => assigned Comment: I can confirm this behavior. But I suppose that is an upstream issue with Vim.app and not especially related to MacPorts. Please report upstream. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 12:12:55 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 19:12:55 -0000 Subject: [MacPorts] #15483: Going back to a new ticket after an error Message-ID: <059.cdba8cb1d1173893207183354eec85d7@macports.org> #15483: Going back to a new ticket after an error -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: wsiegrist at apple.com Type: defect | Status: new Priority: Normal | Milestone: Component: server/hosting | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- If I submit a ticket without a short summary, I get this: {{{ 500 Internal Server Error (Tickets must contain a summary.) }}} Agreed; I should enter a short summary. But if I then click the browser's Back button, in Safari 3, it still just shows the error message. There seems to be no way to get back to the ticket I started, and I have to start all over again. In Firefox 2, when I go back, it reloads an empty ticket form. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 12:22:43 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 19:22:43 -0000 Subject: [MacPorts] #15484: post-commit lint script should handle Portfiles anywhere in repository Message-ID: <059.3cb62fac4edc3fbc4d6ac63ca2380298@macports.org> #15484: post-commit lint script should handle Portfiles anywhere in repository -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: wsiegrist at apple.com Type: defect | Status: new Priority: Normal | Milestone: Component: server/hosting | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- If I commit changes to a Portfile in trunk/dports/*/* a [browser:trunk/base/portmgr/jobs/portfile_lint.pl script] runs which checks the Portfile syntax and emails any errors to the committer and maintainer. But if I have a Portfile elsewhere in the repository, such as under users/*/*, then the script emails me an error instead: {{{ Portfile: pure-devel Error: Unable to open port: Could not find Portfile in /tmp/mp_lint/36446/ryandesign/pure-devel }}} trunk/dports seems to be hardcoded into the script. But the script should support Portfiles, wherever in the repository they may be. William said he doesn't have time to look into this right now so I may take a look. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 12:28:07 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 19:28:07 -0000 Subject: [MacPorts] #15485: RFE: Use distfiles mirror and fallback also for URLs with tags Message-ID: <055.63b6ce3e7f93d624acb4f19aa3a78afe@macports.org> #15485: RFE: Use distfiles mirror and fallback also for URLs with tags ---------------------------------------+------------------------------------ Reporter: raimue at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: ports | Version: 1.7.0 Keywords: distfiles mirror fallback | ---------------------------------------+------------------------------------ If a URL in `master_sites` has a tag, the distfiles mirror and the fallback sites are not considered. For example: {{{ master_sites http://foo.example.org/:tag1 http://bar.example.org/:tag2 distfiles foo:tag1 bar:tag2 }}} In this example, `foo` should be downloaded from `foo.example.org`, `tag2` from `bar.example.org`. But the distfiles mirror and the fallback site are not added. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 12:57:21 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 19:57:21 -0000 Subject: [MacPorts] #13000: wine build incompatible with iPhone SDK In-Reply-To: <054.659e1ffdfbecfef56c70462228d4728a@macports.org> References: <054.659e1ffdfbecfef56c70462228d4728a@macports.org> Message-ID: <063.bc1d3ff40e1d4779af646d8074c71a72@macports.org> #13000: wine build incompatible with iPhone SDK ---------------------------------+------------------------------------------ Reporter: tannhaus at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by ryandesign at macports.org): The wine developers think it's Apple's problem so I filed rdar://problem/5979712 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 13:07:32 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 20:07:32 -0000 Subject: [MacPorts] #15440: update to wyrd 1.4.4 In-Reply-To: <057.e33820883a825435112ccf45ea8e9f87@macports.org> References: <057.e33820883a825435112ccf45ea8e9f87@macports.org> Message-ID: <066.1dca4c80f4ed7d605dae7478b7bc6197@macports.org> #15440: update to wyrd 1.4.4 ------------------------------------+--------------------------------------- Reporter: bxf4 at u.washington.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ------------------------------------+--------------------------------------- Changes (by simon at macports.org): * status: new => closed * resolution: => fixed Comment: Committed in r37302 with the following changes: * Added missing platforms option. * Minor whitespace changes to make `port lint` happy. If you don't like any of these changes just tell me and I will revert them. Thanks for your help, Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 13:08:47 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 20:08:47 -0000 Subject: [MacPorts] #15482: Custom keyboard layouts and vim-app In-Reply-To: <054.d04519513faa503dad95826494324898@macports.org> References: <054.d04519513faa503dad95826494324898@macports.org> Message-ID: <063.f46797ca3896527f26b71415691e836c@macports.org> #15482: Custom keyboard layouts and vim-app ---------------------------------+------------------------------------------ Reporter: themolok at gmail.com | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by themolok at gmail.com): I report it upstream. I can't post here the link of the ticket because... you know, the best editor in the world doesn't have a bug tracker. I'll let you if they answer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 14:21:10 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 21:21:10 -0000 Subject: [MacPorts] #15486: [Port Abandoned] TestDisk Message-ID: <053.fbf66b4a9faec5a9ee83134280e31f1c@macports.org> #15486: [Port Abandoned] TestDisk -------------------------------+-------------------------------------------- Reporter: amtor at hotmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- Please Update TestDisk to the Latest Stable Version 6.9. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 14:36:20 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 21:36:20 -0000 Subject: [MacPorts] #15486: UPDATE: TestDisk -> 6.9 In-Reply-To: <053.fbf66b4a9faec5a9ee83134280e31f1c@macports.org> References: <053.fbf66b4a9faec5a9ee83134280e31f1c@macports.org> Message-ID: <062.272635ea2d9953c70820e7af83cce343@macports.org> #15486: UPDATE: TestDisk -> 6.9 --------------------------------+------------------------------------------- Reporter: amtor at hotmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: testdisk nomaintainer --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * keywords: => testdisk nomaintainer * summary: [Port Abandoned] TestDisk => UPDATE: TestDisk -> 6.9 Comment: This is not a ''Port Abandoned'' ticket, as it does not have a maintainer at all. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 14:55:11 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 21:55:11 -0000 Subject: [MacPorts] #15470: distfile mirror should have files for all variants In-Reply-To: <052.62e2f943f29ae963aba825f02b47aa14@macports.org> References: <052.62e2f943f29ae963aba825f02b47aa14@macports.org> Message-ID: <061.f88c90335df787c272ecabdfb11a9df6@macports.org> #15470: distfile mirror should have files for all variants -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: wsiegrist at apple.com Type: enhancement | Status: closed Priority: Normal | Milestone: MacPorts base enhancements Component: server/hosting | Version: Resolution: fixed | Keywords: -------------------------------+-------------------------------------------- Changes (by wsiegrist at apple.com): * status: new => closed * resolution: => fixed Comment: Fixed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 15:23:10 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 22:23:10 -0000 Subject: [MacPorts] #15487: xemacs: typo in variant no_sumo Message-ID: <055.e6de95732f48de1845e2f016cc66cc7f@macports.org> #15487: xemacs: typo in variant no_sumo ---------------------------------+------------------------------------------ Reporter: wsiegrist at apple.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | ---------------------------------+------------------------------------------ The distfiles-delete line in the no_sumo variant has a stray "i" in it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 15:41:13 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 22:41:13 -0000 Subject: [MacPorts] #15488: wrap text to terminal width Message-ID: <059.9e4a4ae2463c5332b97a21b21e298d1d@macports.org> #15488: wrap text to terminal width -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: raimue at macports.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- MacPorts base in trunk now wraps output to 80 characters, but the terminal window is not necessarily 80 characters wide. It may be wider or narrower. As a first step, I'd like to see the wrap-to width moved into a variable/constant that's defined only once. Magic numbers in source are bad. Next step would be to wrap to the actual terminal width (if output is to a terminal) or not wrap at all (if output is to a file or pipe). Rainer, since you've been working on some stuff near this the past few days, maybe you could at least take care of abstracting the wrap-to width into a variable? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 16:08:46 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 23:08:46 -0000 Subject: [MacPorts] #11751: BUG: rb-rubygems-0.9.2 gem command does not work In-Reply-To: <065.63db5651744ee7ac7dcc2ead0b0ac571@macports.org> References: <065.63db5651744ee7ac7dcc2ead0b0ac571@macports.org> Message-ID: <074.11998d6b995879091706d37912ce9c94@macports.org> #11751: BUG: rb-rubygems-0.9.2 gem command does not work --------------------------------------------+------------------------------- Reporter: thomaslenoir at club-internet.fr | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.4 Resolution: fixed | Keywords: --------------------------------------------+------------------------------- Changes (by mr_bond at macports.org): * status: new => closed * resolution: => fixed Comment: rb-rubygems 1.1.1 requires ruby from macports, gem installs in the right prefix -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 16:13:31 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 23:13:31 -0000 Subject: [MacPorts] #15489: g95 port fails to build Message-ID: <053.03e8947be051b27b56a36eed6e5b7aec@macports.org> #15489: g95 port fails to build -------------------------------+-------------------------------------------- Reporter: macports at flyn.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- I get the following error when I try to build g95 (as a dependency for gnumeric, inkscape or gimp): ---> Attempting to fetch g95_source.tgz from http://ftp.g95.org/v0.91/ Error: Target org.macports.fetch returned: fetch failed I receive a 404 error when I try to load http://ftp.g95.org/v0.91/ in my browser. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 16:38:13 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 23:38:13 -0000 Subject: [MacPorts] #15488: wrap text to terminal width In-Reply-To: <059.9e4a4ae2463c5332b97a21b21e298d1d@macports.org> References: <059.9e4a4ae2463c5332b97a21b21e298d1d@macports.org> Message-ID: <068.a8469cfedfb8e048da720acbb7fd3d1b@macports.org> #15488: wrap text to terminal width --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by raimue at macports.org): * status: new => assigned Comment: My main intention to hardcode that to 80 chars was to make it easier readable, even if you are using a wide terminal size. Changed the behavior of port to use the current size of the terminal window (using COLUMNS environment variable, so you can even customize this). If COLUMNS is not available, it calls `stty size` to get the size. If even this is not available, it prints a warning and uses a default of 80x24. COLUMNS should be updated when the terminal is resized, so this also should work fine with longer sessions in interactive mode, where the user could resize the terminal window. I still have to check what happens when port resets the environment to boot_env, which is done on some places. Committed in r37316. I don't know how to determine if stdout is attached to a terminal or a pipe (or at least not with Tcl, I think this would require some work with in C). Also, I think wrapping is even a good idea when using a pipe, for example `port info |less` or similar. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 16:45:47 2008 From: noreply at macports.org (MacPorts) Date: Mon, 02 Jun 2008 23:45:47 -0000 Subject: [MacPorts] #15489: g95 port fails to build In-Reply-To: <053.03e8947be051b27b56a36eed6e5b7aec@macports.org> References: <053.03e8947be051b27b56a36eed6e5b7aec@macports.org> Message-ID: <062.303dd909179625d55a3a242abd33b4b7@macports.org> #15489: g95 port fails to build --------------------------------+------------------------------------------- Reporter: macports at flyn.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => fixed Comment: g95.org is a server we do not control. So you would have to speak to their admins to find out what the issue is. But you can use our new MacPorts distfiles mirror for now: {{{ $ sudo env MASTER_SITE_LOCAL=http://distfiles.macports.org/g95/:g95 port fetch g95 }}} Or get the file from somewhere else and simply put it into `/opt/local/var/macports/distfiles/g95`. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 17:19:55 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 00:19:55 -0000 Subject: [MacPorts] #15462: rb-mysql 2.7.5_0 fails to build In-Reply-To: <052.a19676576318b50a151f79c697834bea@macports.org> References: <052.a19676576318b50a151f79c697834bea@macports.org> Message-ID: <061.7efecb4be81cae551f48da086844cb77@macports.org> #15462: rb-mysql 2.7.5_0 fails to build -------------------------------+-------------------------------------------- Reporter: tyoshida at mac.com | Owner: febeling at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: rb-mysql -------------------------------+-------------------------------------------- Comment (by tyoshida at mac.com): There are no output from: {{{ ls -la /opt/local/lib/libmys* }}} I don't have any files that begin with 'libmys' in the /opt/local/lib. This is the content of mkmf.log file (when it failed to create Makefile). {{{ find_library: checking for mysql_query() in -lmysqlclient... -------------------- no "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lruby-static -lmysqlclient -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ -------------------- have_library: checking for main() in -lm... -------------------- yes "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lruby-static -lm -lpthread -ldl -lobjc " checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))main; return 0; } /* end */ -------------------- find_library: checking for mysql_query() in -lmysqlclient... -------------------- no "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lm -lruby-static -lmysqlclient -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ -------------------- have_library: checking for main() in -lz... -------------------- yes "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lm -lruby-static -lz -lm -lpthread -ldl -lobjc " checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))main; return 0; } /* end */ -------------------- find_library: checking for mysql_query() in -lmysqlclient... -------------------- no "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ -------------------- have_library: checking for main() in -lsocket... -------------------- no "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lsocket -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lsocket collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))main; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lsocket -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lsocket collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { main(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lsocket -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lsocket collect2: ld returned 1 exit status checked program was: /* begin */ 1: int main(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { main(); return 0; } /* end */ -------------------- find_library: checking for mysql_query() in -lmysqlclient... -------------------- no "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ -------------------- have_library: checking for main() in -lnsl... -------------------- no "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lnsl -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lnsl collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))main; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lnsl -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lnsl collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { main(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lnsl -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lnsl collect2: ld returned 1 exit status checked program was: /* begin */ 1: int main(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { main(); return 0; } /* end */ -------------------- find_library: checking for mysql_query() in -lmysqlclient... -------------------- no "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ -------------------- have_library: checking for main() in -lmygcc... -------------------- no "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmygcc -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmygcc collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))main; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmygcc -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmygcc collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { main(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmygcc -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmygcc collect2: ld returned 1 exit status checked program was: /* begin */ 1: int main(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { main(); return 0; } /* end */ -------------------- find_library: checking for mysql_query() in -lmysqlclient... -------------------- no "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " conftest.c: In function ?t?: conftest.c:3: error: ?mysql_query? undeclared (first use in this function) conftest.c:3: error: (Each undeclared identifier is reported only once conftest.c:3: error: for each function it appears in.) checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { void ((*volatile p)()); p = (void ((*)()))mysql_query; return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: /*top*/ 2: int main() { return 0; } 3: int t() { mysql_query(); return 0; } /* end */ "/usr/bin/gcc-4.0 -o conftest -I. -I/opt/local/lib/ruby/1.8/i686-darwin9.2.2 -I. -I/opt/local/include/mysql5/mysql -I/usr/local/include -I/opt/local/include -O2 -fno-common -pipe -fno-common conftest.c -L\".\" -L\"/opt/local/lib\" -L\"/opt/local/lib/mysql5/mysql\" -L\"/usr/local/lib\" -L\"/usr/local/lib/mysql\" -L. -L/opt/local/lib -lz -lm -lruby-static -lmysqlclient -lz -lm -lpthread -ldl -lobjc " ld: library not found for -lmysqlclient collect2: ld returned 1 exit status checked program was: /* begin */ 1: int mysql_query(); 2: /*top*/ 3: int main() { return 0; } 4: int t() { mysql_query(); return 0; } /* end */ -------------------- }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 18:19:10 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 01:19:10 -0000 Subject: [MacPorts] #15460: WineTricks error installing In-Reply-To: <056.1f24d71b660d3215078f4522592e9d09@macports.org> References: <056.1f24d71b660d3215078f4522592e9d09@macports.org> Message-ID: <065.79e5d197573bce31caace7475e5eb934@macports.org> #15460: WineTricks error installing -----------------------------------+---------------------------------------- Reporter: nksanderfer at live.com | Owner: ryandesign at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: -----------------------------------+---------------------------------------- Changes (by ryandesign at macports.org): * owner: macports-tickets at lists.macosforge.org => ryandesign at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 18:21:38 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 01:21:38 -0000 Subject: [MacPorts] #15460: WineTricks error installing In-Reply-To: <056.1f24d71b660d3215078f4522592e9d09@macports.org> References: <056.1f24d71b660d3215078f4522592e9d09@macports.org> Message-ID: <065.262673fb76087de66bd710024fb04154@macports.org> #15460: WineTricks error installing -----------------------------------+---------------------------------------- Reporter: nksanderfer at live.com | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: -----------------------------------+---------------------------------------- Changes (by ryandesign at macports.org): * cc: michael.culbertson at gmail.com (added) * status: assigned => closed * resolution: => fixed Comment: winetricks was updated to 20080527 in r37152. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 19:07:18 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 02:07:18 -0000 Subject: [MacPorts] #15297: pure, pure-devel: build failure on Leopard In-Reply-To: <057.9aee2802c38bc4486ad4e72f9959a17e@macports.org> References: <057.9aee2802c38bc4486ad4e72f9959a17e@macports.org> Message-ID: <066.a87a1ce2e1854fb8702df09d942c3ba0@macports.org> #15297: pure, pure-devel: build failure on Leopard ------------------------------------+--------------------------------------- Reporter: maggesi at math.unifi.it | Owner: ryandesign at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by ryandesign at macports.org): We are still [http://sourceforge.net/mailarchive/forum.php?thread_name=859E9762-CE65-4792-A8F7-3EC24C7C3D45%40users.sourceforge.net&forum_name =pure-lang-users discussing on pure-lang-users] what to do here. I'm also [http://lists.gnu.org/archive/html/bug-gnu-libiconv/2008-06/msg00000.html asking the libiconv developers]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 19:11:18 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 02:11:18 -0000 Subject: [MacPorts] #15449: source-highlight 2.9 build failure In-Reply-To: <060.13b95b5196ece77531c4ed96d670c286@macports.org> References: <060.13b95b5196ece77531c4ed96d670c286@macports.org> Message-ID: <069.f8136043fb6446f1a722c6bd9df84b8b@macports.org> #15449: source-highlight 2.9 build failure ---------------------------------------+------------------------------------ Reporter: greystone at ardekantur.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: source-highlight boost_regex ---------------------------------------+------------------------------------ Changes (by ryandesign at macports.org): * cc: sanchom at gmail.com (added) Comment: Issue confirmed. I'm running Mac OS X 10.5.3 on a MacBook Pro, Xcode 3.0, MacPorts trunk at 37255. source-highlight builds properly if boost @1.34.1_3 is installed, but fails if boost @1.35.0_0 is installed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 20:06:00 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 03:06:00 -0000 Subject: [MacPorts] #15131: py25-sqlite3 2.5.2 totally broken In-Reply-To: <051.e97dc202325dbe870fcfa9a9852ec3e6@macports.org> References: <051.e97dc202325dbe870fcfa9a9852ec3e6@macports.org> Message-ID: <060.2315f772e9158613ee9ae92a7a8a9c55@macports.org> #15131: py25-sqlite3 2.5.2 totally broken ------------------------------+--------------------------------------------- Reporter: pfein at pobox.com | Owner: mww at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ------------------------------+--------------------------------------------- Changes (by landonf at macports.org): * status: assigned => closed * resolution: => fixed Comment: Older SQLite ports did not build with a two-level namespace and Apple's frameworks link to the system sqlite -- when/if a Python module links against one of those Apple frameworks, MacPorts sqlite and Apple sqlite conflict. Upgrade to the latest SQLite port (3.5.9), which should correctly build two-level namespace. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 20:18:16 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 03:18:16 -0000 Subject: [MacPorts] #15329: apache2: enable parallel build In-Reply-To: <059.bc14b82768a141f35ff28d2cf8060ae6@macports.org> References: <059.bc14b82768a141f35ff28d2cf8060ae6@macports.org> Message-ID: <068.ab4b999e51e26879cb454badfe3f5afa@macports.org> #15329: apache2: enable parallel build --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: imajes at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: No response from maintainer in > 72 hours; committed in r37320. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 20:20:02 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 03:20:02 -0000 Subject: [MacPorts] #15328: db3: enable parallel build In-Reply-To: <059.c6ca9e77adcd4d065a3d17ba4c92f2a2@macports.org> References: <059.c6ca9e77adcd4d065a3d17ba4c92f2a2@macports.org> Message-ID: <068.87fe8f0d8ca0967304ed3e3dd2b443c9@macports.org> #15328: db3: enable parallel build --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: digdog at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: No response from maintainer in > 72 hours; committed in r37321. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 20:37:44 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 03:37:44 -0000 Subject: [MacPorts] #15295: libxml2 use_parallel_build problem In-Reply-To: <059.14bb368a084e244e8570ad5949ac99b0@macports.org> References: <059.14bb368a084e244e8570ad5949ac99b0@macports.org> Message-ID: <068.fd6a267b8aafc7feb0461bb984d8fec7@macports.org> #15295: libxml2 use_parallel_build problem --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: No response from maintainer in > 72 hours; committed in r37322. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 21:00:28 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 04:00:28 -0000 Subject: [MacPorts] #15490: New port p5-iterator Message-ID: <053.e7221f7148bbd9124eb215957ab33db0@macports.org> #15490: New port p5-iterator -------------------------------+-------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: Iterator | -------------------------------+-------------------------------------------- A port of the Perl module Iterator {{{ sudo port install p5-iterator ---> Fetching p5-iterator ---> Verifying checksum(s) for p5-iterator ---> Extracting p5-iterator ---> Configuring p5-iterator ---> Building p5-iterator with target all ---> Staging p5-iterator into destroot ---> Installing p5-iterator 0.03_0 ---> Activating p5-iterator 0.03_0 ---> Cleaning p5-iterator }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 21:02:22 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 04:02:22 -0000 Subject: [MacPorts] #15491: Foo Bar Baz Message-ID: <055.3365a0595d67304e46f2006a5c4456b1@macports.org> #15491: Foo Bar Baz ---------------------------------+------------------------------------------ Reporter: wsiegrist at apple.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 21:05:50 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 04:05:50 -0000 Subject: [MacPorts] #15491: Foo Bar Baz In-Reply-To: <055.3365a0595d67304e46f2006a5c4456b1@macports.org> References: <055.3365a0595d67304e46f2006a5c4456b1@macports.org> Message-ID: <064.7cdb607b961e3bf411066407e1ff25db@macports.org> #15491: Foo Bar Baz ----------------------------------+----------------------------------------- Reporter: wsiegrist at apple.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: invalid | Keywords: ----------------------------------+----------------------------------------- Changes (by wsiegrist at apple.com): * status: new => closed * resolution: => invalid Comment: Inadvertent ticket creation. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 21:55:27 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 04:55:27 -0000 Subject: [MacPorts] #15483: Going back to a new ticket after an error In-Reply-To: <059.cdba8cb1d1173893207183354eec85d7@macports.org> References: <059.cdba8cb1d1173893207183354eec85d7@macports.org> Message-ID: <068.de8a7cb1366081c043dec4d2813f75cb@macports.org> #15483: Going back to a new ticket after an error --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: wsiegrist at apple.com Type: defect | Status: assigned Priority: Normal | Milestone: Component: server/hosting | Version: Resolution: | Keywords: trac 0.11 --------------------------------------+------------------------------------- Changes (by wsiegrist at apple.com): * keywords: => trac 0.11 * status: new => assigned * version: 1.6.0 => Comment: This is fixed by Trac 0.11. It happens because Trac uses the same URL to display the error but doesnt reprint the form. Firefox seems to handle the caching like you want it to even with an #id tag in the URL. What Safari does is reasonable, IMO, but unfortunate in this case. I do not see an easy workaround with 0.10.4 in the meantime (other than using FF to file tickets). I'll hold onto this ticket to verify once we move to 0.11. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 22:05:56 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 05:05:56 -0000 Subject: [MacPorts] #15483: Going back to a new ticket after an error In-Reply-To: <059.cdba8cb1d1173893207183354eec85d7@macports.org> References: <059.cdba8cb1d1173893207183354eec85d7@macports.org> Message-ID: <068.a0f90aa0477e570b1c23f10ad832e927@macports.org> #15483: Going back to a new ticket after an error --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: wsiegrist at apple.com Type: defect | Status: assigned Priority: Normal | Milestone: Component: server/hosting | Version: Resolution: | Keywords: trac 0.11 --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): The behavior in Firefox is not much better than in Safari. In Firefox, it does take you back to the new ticket form, but the form is cleared. You still have to enter your ticket info from scratch. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 22:35:30 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 05:35:30 -0000 Subject: [MacPorts] #15492: UPDATE: ldns, ldns-tools, drill 1.3.0 Message-ID: <064.473f3dc9b5c2f1005a5293d08b948bd4@macports.org> #15492: UPDATE: ldns, ldns-tools, drill 1.3.0 ------------------------------------------+--------------------------------- Reporter: marius.rieder at durchmesser.ch | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | ------------------------------------------+--------------------------------- upstream update to ldns 1.3.0 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 2 23:44:23 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 06:44:23 -0000 Subject: [MacPorts] #15476: python25 build failure In-Reply-To: <049.20f55f2a0cec0ace5cb7bc25cc3414f6@macports.org> References: <049.20f55f2a0cec0ace5cb7bc25cc3414f6@macports.org> Message-ID: <058.6f8f4dc84f1f6e2d26ff15260b1dbdb2@macports.org> #15476: python25 build failure ----------------------------+----------------------------------------------- Reporter: ewira at free.fr | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ----------------------------+----------------------------------------------- Comment (by ewira at free.fr): Hi, thanks this was working. I learn a lot with cleaning and unistalling ports. So I have start agin the installation of gnumeric, but it seems that the g95 port is not available : {{{ Fetching g95 ---> Attempting to fetch gcc-core-4.0.4.tar.bz2 from ftp:// gcc.gnu.org/pub/gcc/releases/gcc-4.0.4/ ---> Attempting to fetch g95_source.tgz from http://ftp.g95.org/v0.91/ Error: Target org.macports.fetch returned: fetch failed Error: The following dependencies failed to build: py25-gtk py25- cairo py25-numpy g95 Error: Status 1 encountered during processing. }}} Should I wait for the website to be up, or is there another way to get g95? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 00:06:57 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 07:06:57 -0000 Subject: [MacPorts] #14748: Update port links to version 2.1pre33 In-Reply-To: <052.7058151ddfea3ea0f9fd93c602b674a2@macports.org> References: <052.7058151ddfea3ea0f9fd93c602b674a2@macports.org> Message-ID: <061.396d35e5e4cb20e64d3e830a6f3a4bf1@macports.org> #14748: Update port links to version 2.1pre33 -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: landonf at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: -------------------------------+-------------------------------------------- Changes (by blb at macports.org): * status: new => closed * resolution: => fixed Comment: Closing since landonf@ updated to a later version in r37324. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 00:46:03 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 07:46:03 -0000 Subject: [MacPorts] #15334: important boost 1.35 bugfixes, updates, and variants In-Reply-To: <056.acb6900fd0cbda899fbb3088b680c11e@macports.org> References: <056.acb6900fd0cbda899fbb3088b680c11e@macports.org> Message-ID: <065.d8d82adfa1e1c8213b973ae7deaf4ecc@macports.org> #15334: important boost 1.35 bugfixes, updates, and variants -----------------------------------+---------------------------------------- Reporter: andrew at fernandes.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: boost -----------------------------------+---------------------------------------- Comment (by sanchom at gmail.com): Can these fixes be committed please? I've tried them out and they're good, except for the introduced ICU variant bug. I think this trade-off is worth it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 01:19:17 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 08:19:17 -0000 Subject: [MacPorts] #14975: opendx build on leopard fails with unresolved symbols In-Reply-To: <048.7b16e498fb35be9395c456be31ab0766@macports.org> References: <048.7b16e498fb35be9395c456be31ab0766@macports.org> Message-ID: <057.56dca3137bfb856fb2212d89e5fb696e@macports.org> #14975: opendx build on leopard fails with unresolved symbols ---------------------------+------------------------------------------------ Reporter: pel1 at psu.edu | Owner: gwright at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: opendx libOPENGL.a ---------------------------+------------------------------------------------ Comment (by kuroyagi at therandomwalker.net): It is caused by the failure of configure to find libGL[[BR]] It is clear from the following config.log {{{ configure:25194: checking for glXGetConfig in -lGL configure:25224: /usr/bin/gcc-4.0 -o conftest -O2 -I/usr/X11R6/include -I/opt/local/include -I/usr/X11R6/include -L/opt/local/lib conftest.c -lGL -lm -lXmu -lXext -lXt -lX11 -lxm -lxt -lSM -lICE -L/usr/X11R6/lib -lpthread >&5 ld: cycle in dylib re-exports with /usr/X11R6/lib/libGL.dylib collect2: ld returned 1 exit status configure:25230: $? = 1 }}} The reason configure fails to link to libGL is explained at [http://developer.apple.com/qa/qa2007/qa1567.html] following patch resolves this linking problem but #14085 still exists {{{ --- /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/opendx/Portfile.orig 2007-10-10 17:15:05.000000000 +0900 +++ /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/opendx/Portfile 2008-06-02 18:12:16.000000000 +0900 @@ -48,7 +48,10 @@ JAVA=/usr/bin/java \ JAVAC=/usr/bin/javac \ JAVAH=/usr/bin/javah \ - JAVAP=/usr/bin/javap + JAVAP=/usr/bin/javap \ + LDFLAGS="-dylib_file \ +/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib:\ +/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib" configure.args --x-includes=/usr/X11R6/include \ --x-libraries=/usr/X11R6/lib \ --with-jni- path=/System/Library/Frameworks/JavaVM.framework/Headers \ }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 01:40:24 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 08:40:24 -0000 Subject: [MacPorts] #14085: opendx compilation problem on Leopard In-Reply-To: <060.8a93eb4ff9eb133d861f404145efd30f@macports.org> References: <060.8a93eb4ff9eb133d861f404145efd30f@macports.org> Message-ID: <069.44e67159f6ba99b76c4c5c5d01997c63@macports.org> #14085: opendx compilation problem on Leopard ---------------------------------------+------------------------------------ Reporter: joergf at maths.otago.ac.nz | Owner: gwright at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: opendx compiletime error ---------------------------------------+------------------------------------ Comment (by kuroyagi at therandomwalker.net): /System/Library/Frameworks/Security.framework/Headers/cssmconfig.h defines uint64, uint32, uint16 and uint8 but they were already defined... define following symbols to avoid this conflict {{{ --- /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/opendx/Portfile.orig 2008-06-03 17:27:07.000000000 +0900 +++ /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/opendx/Portfile 2008-06-03 17:28:34.000000000 +0900 @@ -51,7 +51,8 @@ JAVAP=/usr/bin/javap \ LDFLAGS="-dylib_file \ /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib:\ -/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib" +/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib" \ + CPPFLAGS="-D_UINT64 -D_UINT32 -D_UINT16 -D_UINT8" configure.args --x-includes=/usr/X11R6/include \ --x-libraries=/usr/X11R6/lib \ --with-jni- path=/System/Library/Frameworks/JavaVM.framework/Headers \ }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 01:56:40 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 08:56:40 -0000 Subject: [MacPorts] #15493: ilmbase +universal doesn't build universal shared libraries Message-ID: <059.ef3c8491d408a0eb0f14e6043b2554d7@macports.org> #15493: ilmbase +universal doesn't build universal shared libraries -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- Installing ilmbase +universal yields universal static libraries but non- universal shared libraries: {{{ $ port contents ilmbase | grep /lib/ | xargs file /opt/local/lib/libHalf.6.0.0.dylib: Mach-O dynamically linked shared library i386 /opt/local/lib/libHalf.6.dylib: symbolic link to `libHalf.6.0.0.dylib' /opt/local/lib/libHalf.a: Mach-O universal binary with 2 architectures /opt/local/lib/libHalf.a (for architecture ppc): current ar archive /opt/local/lib/libHalf.a (for architecture i386): current ar archive /opt/local/lib/libHalf.dylib: symbolic link to `libHalf.6.0.0.dylib' /opt/local/lib/libHalf.la: ASCII English text /opt/local/lib/libIex.6.0.0.dylib: Mach-O dynamically linked shared library i386 /opt/local/lib/libIex.6.dylib: symbolic link to `libIex.6.0.0.dylib' /opt/local/lib/libIex.a: Mach-O universal binary with 2 architectures /opt/local/lib/libIex.a (for architecture ppc): current ar archive /opt/local/lib/libIex.a (for architecture i386): current ar archive random library /opt/local/lib/libIex.dylib: symbolic link to `libIex.6.0.0.dylib' /opt/local/lib/libIex.la: ASCII English text /opt/local/lib/libIlmThread.6.0.0.dylib: Mach-O dynamically linked shared library i386 /opt/local/lib/libIlmThread.6.dylib: symbolic link to `libIlmThread.6.0.0.dylib' /opt/local/lib/libIlmThread.a: Mach-O universal binary with 2 architectures /opt/local/lib/libIlmThread.a (for architecture ppc): current ar archive /opt/local/lib/libIlmThread.a (for architecture i386): current ar archive random library /opt/local/lib/libIlmThread.dylib: symbolic link to `libIlmThread.6.0.0.dylib' /opt/local/lib/libIlmThread.la: ASCII English text /opt/local/lib/libImath.6.0.0.dylib: Mach-O dynamically linked shared library i386 /opt/local/lib/libImath.6.dylib: symbolic link to `libImath.6.0.0.dylib' /opt/local/lib/libImath.a: Mach-O universal binary with 2 architectures /opt/local/lib/libImath.a (for architecture ppc): current ar archive /opt/local/lib/libImath.a (for architecture i386): current ar archive random library /opt/local/lib/libImath.dylib: symbolic link to `libImath.6.0.0.dylib' /opt/local/lib/libImath.la: ASCII English text /opt/local/lib/pkgconfig/IlmBase.pc: ASCII text $ }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 02:20:09 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 09:20:09 -0000 Subject: [MacPorts] #15493: ilmbase +universal doesn't build universal shared libraries In-Reply-To: <059.ef3c8491d408a0eb0f14e6043b2554d7@macports.org> References: <059.ef3c8491d408a0eb0f14e6043b2554d7@macports.org> Message-ID: <068.d2d08ffc0291dbeb4c03d711ca57cc96@macports.org> #15493: ilmbase +universal doesn't build universal shared libraries --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): I was able to work around it by replacing the included libtool with the newer one in MacPorts; see patch. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 02:30:49 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 09:30:49 -0000 Subject: [MacPorts] #15494: openexr's directory has wrong case Message-ID: <059.47cc283743d965c6fab18bc04c860dd7@macports.org> #15494: openexr's directory has wrong case -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- The directory the openexr port is in is called "OpenEXR"; it should be changed to "openexr" to match the port name. {{{ $ port lint openexr ---> Verifying Portfile for openexr Error: Portfile directory OpenEXR does not match port name openexr ---> 1 errors and 0 warnings found. $ }}} To fix this, I believe you can run: {{{ svn mv http://svn.macosforge.org/repository/macports/trunk/dports/graphics/{OpenEXR,openexr} }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 02:58:11 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 09:58:11 -0000 Subject: [MacPorts] #15493: ilmbase and openexr universal variants don't work right In-Reply-To: <059.ef3c8491d408a0eb0f14e6043b2554d7@macports.org> References: <059.ef3c8491d408a0eb0f14e6043b2554d7@macports.org> Message-ID: <068.9c3be2944d3ecab9eb1902ccf30274d7@macports.org> #15493: ilmbase and openexr universal variants don't work right --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * summary: ilmbase +universal doesn't build universal shared libraries => ilmbase and openexr universal variants don't work right Comment: openexr (ilmbase's only reason for being?) also doesn't work properly with +universal: {{{ $ sudo port install openexr +universal ---> Configuring openexr ---> Building openexr with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_Users_rschmidt_macports_dports_graphics_OpenEXR/work/openexr-1.6.1" && nice -n 1 make all -j2" returned error 2 Command output: Imf::ChannelList::end() const Imf::ChannelList::begin() const Imf::Header::end() const Imf::Header::begin() const Imf::KeyCode::perfOffset() const Imf::KeyCode::filmMfcCode() const Imf::KeyCode::perfsPerCount() const Imf::KeyCode::perfsPerFrame() const Imf::KeyCode::count() const Imf::KeyCode::prefix() const Imf::KeyCode::filmType() const Imf::TimeCode::colorFrame() const Imf::TimeCode::fieldPhase() const Imf::TimeCode::bgf0() const Imf::TimeCode::bgf1() const Imf::TimeCode::bgf2() const Imf::TimeCode::frame() const Imf::TimeCode::hours() const Imf::TimeCode::minutes() const Imf::TimeCode::seconds() const Imf::TimeCode::userData() const Imf::TimeCode::dropFrame() const Imf::InputFile::isComplete() const Imf::InputFile::header() const Imf::InputFile::version() const typeinfo for Imf::Attribute collect2: ld returned 1 exit status lipo: can't open input file: /var/tmp//ccB9ehkq.out (No such file or directory) make[1]: *** [exrheader] Error 1 make: *** [all-recursive] Error 1 Error: Status 1 encountered during processing. $ }}} The solution seems to be the same. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 03:04:05 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 10:04:05 -0000 Subject: [MacPorts] #15493: ilmbase and openexr universal variants don't work right In-Reply-To: <059.ef3c8491d408a0eb0f14e6043b2554d7@macports.org> References: <059.ef3c8491d408a0eb0f14e6043b2554d7@macports.org> Message-ID: <068.e8ad5fe4629d999f27ded42246beccaf@macports.org> #15493: ilmbase and openexr universal variants don't work right --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): Also, openexr declared ilmbase as a build dependency, but I believe it's actually a library dependency. Fixed this in the attached patch too. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 03:12:21 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 10:12:21 -0000 Subject: [MacPorts] #15338: openexr won't upgrade In-Reply-To: <060.7b2c3795d31c679c73b01d780b85c4e1@macports.org> References: <060.7b2c3795d31c679c73b01d780b85c4e1@macports.org> Message-ID: <069.b7aa80adabf72cafc9ab35972eec52de@macports.org> #15338: openexr won't upgrade ---------------------------------------+------------------------------------ Reporter: jannesbolten at yahoo.co.uk | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: openexr; ilmbase ---------------------------------------+------------------------------------ Comment (by ryandesign at macports.org): Why "{{{Activating openexr 1.4.0_0}}}"? openexr was updated to 1.6.1_0 in r35935. I don't have any problem with conflicting files when using the current version of openexr and ilmbase. Please {{{sudo port selfupdate}}} and try again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 03:13:40 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 10:13:40 -0000 Subject: [MacPorts] #15338: openexr won't upgrade In-Reply-To: <060.7b2c3795d31c679c73b01d780b85c4e1@macports.org> References: <060.7b2c3795d31c679c73b01d780b85c4e1@macports.org> Message-ID: <069.4587ffd12c8cb8ad14e09e524f6d1e66@macports.org> #15338: openexr won't upgrade ---------------------------------------+------------------------------------ Reporter: jannesbolten at yahoo.co.uk | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: openexr; ilmbase ---------------------------------------+------------------------------------ Comment (by ryandesign at macports.org): You may want to just remove your existing installed versions of openexr and ilmbase and reinstall. {{{ sudo port uninstall openexr ilmbase sudo port selfupdate sudo port install openexr }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 03:16:23 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 10:16:23 -0000 Subject: [MacPorts] #15495: openexr, ilmbase: enable parallel build Message-ID: <059.5e647ca5207bdd06e79246f51ae6a2b5@macports.org> #15495: openexr, ilmbase: enable parallel build -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- I recommend enabling the parallel build feature for openexr and ilmbase. It worked for me with {{{buildmakejobs}}} set to {{{2}}}. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 03:23:12 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 10:23:12 -0000 Subject: [MacPorts] #15496: llvm +universal doesn't build Message-ID: <059.c63c72ce731c910a25a1942c6e48af67@macports.org> #15496: llvm +universal doesn't build -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: erickt at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- Building a universal variant of llvm doesn't seem to work: {{{ $ sudo port install llvm +universal ---> Fetching llvm ---> Verifying checksum(s) for llvm ---> Extracting llvm ---> Configuring llvm ---> Building llvm with target tools-only Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build" && nice -n 1 make tools-only " returned error 2 Command output: llvm[2]: Compiling TableGen.cpp for Release build llvm[2]: Compiling TableGenBackend.cpp for Release build llvm[2]: Linking Release executable tblgen (without symbols) /usr/bin/ld: for architecture ppc /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/AsmWriterEmitter.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/CallingConvEmitter.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/CodeEmitterGen.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/CodeGenDAGPatterns.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/CodeGenInstruction.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/CodeGenTarget.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/DAGISelEmitter.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/InstrEnumEmitter.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/InstrInfoEmitter.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/IntrinsicEmitter.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/Record.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/RegisterInfoEmitter.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/SubtargetEmitter.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/TGLexer.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/TGParser.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/TableGen.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/utils/TableGen/Release/TableGenBackend.o cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/Release/lib/libLLVMSupport.a archive's cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (can't load from it) /usr/bin/ld: warning /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/Release/lib/libLLVMSystem.a archive's cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (can't load from it) /usr/bin/ld: Undefined symbols: _main collect2: ld returned 1 exit status lipo: can't open input file: /var/tmp//cc9jNQ2x.out (No such file or directory) make[2]: *** [/opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_llvm/work/build/Release/bin/tblgen] Error 1 make[1]: *** [TableGen/.makeall] Error 2 make: *** [all] Error 1 Error: Status 1 encountered during processing. $ }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 03:50:06 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 10:50:06 -0000 Subject: [MacPorts] #13229: aquaterm 1.0.1 tries to build universally by default In-Reply-To: <050.ddfb670a25a1299f94a37a7e90581ed7@macports.org> References: <050.ddfb670a25a1299f94a37a7e90581ed7@macports.org> Message-ID: <059.53f999fa108d3b4ab7cc9a709e91c1ca@macports.org> #13229: aquaterm 1.0.1 tries to build universally by default -----------------------------+---------------------------------------------- Reporter: ikedae at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: aquaterm PowerPC -----------------------------+---------------------------------------------- Comment (by ryandesign at macports.org): Note: the message says: {{{ /Developer/SDKs/MacOSX10.4u.sdk/usr/local/lib/libTIFF.dylib }}} Note {{{/usr/local}}} in the path. Apple does not provide anything in {{{/usr/local}}} so I suspect you have installed a version of libtiff into {{{/usr/local}}}. Having libraries installed in {{{/usr/local}}} is problematic for MacPorts. Please try renaming {{{/usr/local}}} (e.g. {{{sudo mv /usr/local /usr/local-off}}}). Then clean the port's work area ({{{sudo port clean --work aquaterm}}}) and try installing it again ({{{sudo port install aquaterm}}}). If this works, I recommend you permanently leave {{{/usr/local}}} empty. For any items you had installed there, install them with MacPorts instead. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 04:07:52 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 11:07:52 -0000 Subject: [MacPorts] #15435: mysql5 readline support In-Reply-To: <053.688f74dffe2a0710ebc82d2d957819a6@macports.org> References: <053.688f74dffe2a0710ebc82d2d957819a6@macports.org> Message-ID: <062.7dfcc98d4df6501fe24394d5f471add5@macports.org> #15435: mysql5 readline support --------------------------------+------------------------------------------- Reporter: naoya.n at gmail.com | Owner: ryandesign at macports.org Type: enhancement | Status: assigned Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by ryandesign at macports.org): After a little investigation ("`./configure --help`"), it looks to me as though "`--with-readline`" is the default, for mysql3, mysql4 and mysql5, and means "use the readline library included with MySQL". Alternately, you can use "`--without-readline`" which means "don't use the included readline but use the system readline" which in our case would mean "use the MacPorts readline". We could do that, but would that provide any advantage? I'm also curious how you arrived at the conclusion that "Mysql5 is not support readline" and whether the `+readline` variant you supplied actually does anything. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 04:52:31 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 11:52:31 -0000 Subject: [MacPorts] #15002: gmp-4.2.2 - patch for much faster x86-64 variant In-Reply-To: <052.ebcfb13fced2f0829011ebb7b70640c8@macports.org> References: <052.ebcfb13fced2f0829011ebb7b70640c8@macports.org> Message-ID: <061.a75918eade1f49e3470c327445a40ca4@macports.org> #15002: gmp-4.2.2 - patch for much faster x86-64 variant -------------------------------+-------------------------------------------- Reporter: akalin at akalin.cx | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by ryandesign at macports.org): The parallel build was enabled in r37277. Should the rest of this patch perhaps be rolled into the universal variant instead, since we now have support in trunk for specifying what architectures you want to include in a universal build? (`${configure.universal_archs}`) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 06:34:28 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 13:34:28 -0000 Subject: [MacPorts] #15450: mtr unable to resolve hostname arguements on Mac OS X 10.5.3 In-Reply-To: <058.d6323bdd20fc742546588d35e8f3a399@macports.org> References: <058.d6323bdd20fc742546588d35e8f3a399@macports.org> Message-ID: <067.f1c70d551b4a13a50f968c1d0672ac61@macports.org> #15450: mtr unable to resolve hostname arguements on Mac OS X 10.5.3 -------------------------------------+-------------------------------------- Reporter: bahamat at digitalelf.net | Owner: mr_bond at macports.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: 10.5.3 -------------------------------------+-------------------------------------- Changes (by mr_bond at macports.org): * owner: macports-tickets at lists.macosforge.org => mr_bond at macports.org Comment: Will fix when I get home from work in a couple of hours if it's not commited yet. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 06:42:03 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 13:42:03 -0000 Subject: [MacPorts] #15497: new port p5-iterator-util of Iterator::Util Perl file Message-ID: <053.d6312eeabc0eaeb77c580d52a4d3b557@macports.org> #15497: new port p5-iterator-util of Iterator::Util Perl file -------------------------------+-------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: iterator, perl | -------------------------------+-------------------------------------------- Port of the Perl module Iterator::Util {{{ sudo port install p5-iterator-util ---> Fetching p5-iterator-util ---> Verifying checksum(s) for p5-iterator-util ---> Extracting p5-iterator-util ---> Configuring p5-iterator-util ---> Building p5-iterator-util with target all ---> Staging p5-iterator-util into destroot ---> Installing p5-iterator-util 0.02_0 ---> Activating p5-iterator-util 0.02_0 ---> Cleaning p5-iterator-util }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 06:44:37 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 13:44:37 -0000 Subject: [MacPorts] #15498: Port of Perl Module Mail::Sender Message-ID: <053.9f9465973f539e3168ade795df63bd34@macports.org> #15498: Port of Perl Module Mail::Sender -------------------------------+-------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: ports | Version: 1.6.0 Keywords: Mail, sender | -------------------------------+-------------------------------------------- Port of Perl Module Mail::Sender {{{ sudo port install p5-mail-sender ---> Fetching p5-mail-sender ---> Verifying checksum(s) for p5-mail-sender ---> Extracting p5-mail-sender ---> Configuring p5-mail-sender ---> Building p5-mail-sender with target all ---> Staging p5-mail-sender into destroot ---> Installing p5-mail-sender 0.8.13_0 ---> Activating p5-mail-sender 0.8.13_0 ---> Cleaning p5-mail-sender }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 06:46:39 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 13:46:39 -0000 Subject: [MacPorts] #15499: New port of Perl Module Net::IP Message-ID: <053.669f0b8e9bb91bf54bcf6fd91b3af4c8@macports.org> #15499: New port of Perl Module Net::IP -------------------------------+-------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: net, ip | -------------------------------+-------------------------------------------- New port of Perl Module Net::IP {{{ sudo port install p5-net-ip ---> Fetching p5-net-ip ---> Verifying checksum(s) for p5-net-ip ---> Extracting p5-net-ip ---> Configuring p5-net-ip ---> Building p5-net-ip with target all ---> Staging p5-net-ip into destroot ---> Installing p5-net-ip 1.25_0 ---> Activating p5-net-ip 1.25_0 ---> Cleaning p5-net-ip }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 06:48:38 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 13:48:38 -0000 Subject: [MacPorts] #15500: New port of Perl module String::ShellQuote Message-ID: <053.5bb4e354c982eadd085f65831e80356e@macports.org> #15500: New port of Perl module String::ShellQuote --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: string, shellquote | --------------------------------+------------------------------------------- New port of Perl module String::ShellQuote {{{ sudo port install p5-string-shellquote ---> Installing p5-string-shellquote 1.03_0 ---> Activating p5-string-shellquote 1.03_0 ---> Cleaning p5-string-shellquote }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 06:51:07 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 13:51:07 -0000 Subject: [MacPorts] #15501: New port of Perl Module XML::Parser::EasyTree Message-ID: <053.4ef9457a098b4598231aa1151bd616d0@macports.org> #15501: New port of Perl Module XML::Parser::EasyTree -----------------------------------+---------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: xml, parser, easytree | -----------------------------------+---------------------------------------- New port of Perl Module XML::Parser::EasyTree {{{ sudo port install p5-xml-parser-easytree ---> Fetching p5-xml-parser-easytree ---> Verifying checksum(s) for p5-xml-parser-easytree ---> Extracting p5-xml-parser-easytree ---> Configuring p5-xml-parser-easytree ---> Building p5-xml-parser-easytree with target all ---> Staging p5-xml-parser-easytree into destroot ---> Installing p5-xml-parser-easytree 0.01_0 ---> Activating p5-xml-parser-easytree 0.01_0 ---> Cleaning p5-xml-parser-easytree }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 06:52:55 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 13:52:55 -0000 Subject: [MacPorts] #15500: New port of Perl module String::ShellQuote In-Reply-To: <053.5bb4e354c982eadd085f65831e80356e@macports.org> References: <053.5bb4e354c982eadd085f65831e80356e@macports.org> Message-ID: <062.b4197eeb7e26be1fc2018cd23ea715a5@macports.org> #15500: New port of Perl module String::ShellQuote --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: string, shellquote --------------------------------+------------------------------------------- Comment (by hagedorn at tcnj.edu): Should be (enhancement) not (defect) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 07:00:32 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 14:00:32 -0000 Subject: [MacPorts] #15502: Build qt4-mac plugins as bundles instead of dylibs Message-ID: <057.25e9d6406e95babe20977f97cf9936bb@macports.org> #15502: Build qt4-mac plugins as bundles instead of dylibs -----------------------------------+---------------------------------------- Reporter: clubjuggler at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: qt4-mac, kde4-mac | -----------------------------------+---------------------------------------- After talking to Ben Reed, maintainer of the (non-macport) KDE/Mac packages ( http://mac.kde.org/ ) he alerted me to a problem with the standard qt4-mac build from Trolltech. See below for details: Text taken from http://websvn.kde.org/trunk/qt-copy/patches/0231-mac- plugins.diff?view=markup&pathrev=816225 author: Benjamin Reed By default, Qt/Mac builds plugins as dynamic libraries, instead of bundles, which is incorrect for a runtime-loadable module. In addition, it calls them .dylib when they should be .bundle (or .so) by Mac convention (although this is just a cosmetic thing). In addition, KDE phonon cannot load Qt phonon backends because they are built as normal twolevel dynamic libraries, which means that they try to use symbols from the library they were linked against, even if a newer version of that library is already loaded into memory. For example: $QTDIR/plugins/phonon_backend/libphonon_qt7.dylib links to $QTDIR/lib/phonon.framework/Versions/4/phonon. Amarok links to $KDEDIR/lib/libphonon.4.dylib. At runtime, Amarok resolves it's phonon symbols to the $KDEDIR version, then dlopens libphonon_qt7 from $QTDIR which resolves some of those same symbols from the $QTDIR version of phonon, since it explicitly references the version it was linked against, rather than the version it was loaded into. What you end up with is a dangling pointer. For details on this, see Apple's documentation: http://developer.apple.com/documentation/Porting/Conceptual/PortingUnix/compiling/chapter_4_section_7.html In short, the fix is to build plugins as bundles, with a flat namespace. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 08:08:03 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 15:08:03 -0000 Subject: [MacPorts] #15476: python25 build failure In-Reply-To: <049.20f55f2a0cec0ace5cb7bc25cc3414f6@macports.org> References: <049.20f55f2a0cec0ace5cb7bc25cc3414f6@macports.org> Message-ID: <058.9a3720d38753cbecef0e01549be8511d@macports.org> #15476: python25 build failure ----------------------------+----------------------------------------------- Reporter: ewira at free.fr | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ----------------------------+----------------------------------------------- Comment (by ewira at free.fr): Replying to [ticket:15476 ewira at free.fr]: Oops, the solution is there -> [http://trac.macports.org/ticket/15489] -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 09:14:22 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 16:14:22 -0000 Subject: [MacPorts] #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist Message-ID: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist ---------------------------------+------------------------------------------ Reporter: paulp at improving.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: scala xml | ---------------------------------+------------------------------------------ See output below. I can't yet see what the difference between them is, but here is the closed bug report from the scala database, which it says was fixed in march. https://lampsvn.epfl.ch/trac/scala/ticket/632 jon:servlet paulp$ export SCALA_HOME=/tmp/scala-2.7.1.final[[BR]] jon:servlet paulp$ $SCALA_HOME/bin/scala[[BR]] Welcome to Scala version 2.7.1.final (Java HotSpot(TM) Client VM, Java 1.5.0_13).[[BR]] Type in expressions to have them evaluated.[[BR]] Type :help for more information.[[BR]] scala> import scala.xml._[[BR]] import scala.xml._[[BR]] scala> XML.loadFile("fail.xml") [[BR]] res1: scala.xml.Elem = [[BR]] classifieds - craigslist jon:servlet paulp$ port installed |grep "scala @"[[BR]] scala @2.7.1_0 (active)[[BR]] jon:servlet paulp$ export SCALA_HOME=/opt/local/share/scala[[BR]] jon:servlet paulp$ $SCALA_HOME/bin/scala[[BR]] Welcome to Scala version 2.7.1.final (Java HotSpot(TM) Client VM, Java 1.5.0_13).[[BR]] Type in expressions to have them evaluated.[[BR]] Type :help for more information. scala> import scala.xml._[[BR]] import scala.xml._ scala> XML.loadFile("fail.xml") [[BR]] java.util.NoSuchElementException[[BR]] at scala.RandomAccessSeq$$anon$12.next(RandomAccessSeq.scala:144)[[BR]] at scala.xml.Utility$.parseAttributeValue(Utility.scala:420)[[BR]] at scala.xml.UnprefixedAttribute.(UnprefixedAttribute.scala:24)[[BR]] at scala.xml.parsing.FactoryAdapter$$anonfun$startElement$1.apply(FactoryAdapter.scala:155)[[BR]] at scala.xml.parsing.FactoryAdapter$$anonfun$startElement$1....[[BR]] scala> -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 09:41:34 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 16:41:34 -0000 Subject: [MacPorts] #15504: libffi installs files that are readable only by root Message-ID: <054.b71ed344034b8f0f39cb70210df73824@macports.org> #15504: libffi installs files that are readable only by root --------------------------------+------------------------------------------- Reporter: blair at macports.org | Owner: pguyot at kallisys.net Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- With the latest libffi port, all the files installed in ${prefix}/share/doc/libffi are readable only by root. {{{ $ ls -l /opt/local/macports/share/doc/libffi/ total 108 -rw------- 2 root admin 56530 Jan 14 13:15 ChangeLog -rw------- 2 root admin 1103 Jan 14 13:15 ChangeLog.libgcj -rw------- 2 root admin 23008 Jan 14 13:15 ChangeLog.v1 -rw------- 2 root admin 1060 Jan 14 13:15 LICENSE -rw------- 2 root admin 15351 Jan 14 13:15 README -rw------- 2 root admin 241 Jan 14 13:15 README.pyobjc }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 10:12:48 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 17:12:48 -0000 Subject: [MacPorts] #15334: important boost 1.35 bugfixes, updates, and variants In-Reply-To: <056.acb6900fd0cbda899fbb3088b680c11e@macports.org> References: <056.acb6900fd0cbda899fbb3088b680c11e@macports.org> Message-ID: <065.18ad0127c076bbdd4c386bd5d8594903@macports.org> #15334: important boost 1.35 bugfixes, updates, and variants -----------------------------------+---------------------------------------- Reporter: andrew at fernandes.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: boost -----------------------------------+---------------------------------------- Comment (by andrew at fernandes.org): Funny timing - a few minutes ago I received an email regarding the ICU [http://svn.boost.org/trac/boost/ticket/1928 Boost Bug #1928]. Apparently it has been fixed in the boost trunk for milestone 1.35.1. I tried downloading and checking what changed in order to make a patch... and all I can say is a '''lot''' within the 'tools/build/v2' directory hierarchy. Many changes are comments, but since this is all black magic to me, I have no idea what has changed, or anything. Sorry. On the other hand, I think the bug I submitted for the 'headerpad...' patch will be accepted... Cheers, -Andrew. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 12:03:27 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 19:03:27 -0000 Subject: [MacPorts] #15226: python25 PortGroup variables are incorrect In-Reply-To: <051.68f2e29be81a26674723d0b42f6da266@macports.org> References: <051.68f2e29be81a26674723d0b42f6da266@macports.org> Message-ID: <060.c2b5893c5fb999ca4accc442ea490ae1@macports.org> #15226: python25 PortGroup variables are incorrect ------------------------------+--------------------------------------------- Reporter: xunil at xunil.net | Owner: jmr at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: MacPorts 1.6.1 Component: base | Version: 1.6.0 Resolution: | Keywords: ------------------------------+--------------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 12:06:30 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 19:06:30 -0000 Subject: [MacPorts] #15226: python25 PortGroup variables are incorrect In-Reply-To: <051.68f2e29be81a26674723d0b42f6da266@macports.org> References: <051.68f2e29be81a26674723d0b42f6da266@macports.org> Message-ID: <060.2a93164ef233989162e3ec11eb95a6b2@macports.org> #15226: python25 PortGroup variables are incorrect ------------------------------+--------------------------------------------- Reporter: xunil at xunil.net | Owner: jmr at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: MacPorts 1.6.1 Component: base | Version: 1.6.0 Resolution: | Keywords: ------------------------------+--------------------------------------------- Comment (by jmr at macports.org): Fixed in trunk for all python portgroups by r37336. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 13:09:50 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 20:09:50 -0000 Subject: [MacPorts] #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist In-Reply-To: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> References: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> Message-ID: <064.1ee51d5f71a3cb2e7105fd25fd7e673d@macports.org> #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist ----------------------------------+----------------------------------------- Reporter: paulp at improving.org | Owner: blair at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: scala xml ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => blair at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 13:16:57 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 20:16:57 -0000 Subject: [MacPorts] #15504: libffi installs files that are readable only by root In-Reply-To: <054.b71ed344034b8f0f39cb70210df73824@macports.org> References: <054.b71ed344034b8f0f39cb70210df73824@macports.org> Message-ID: <063.9ddc58813d6e9cc354d03de6890e5ce8@macports.org> #15504: libffi installs files that are readable only by root ---------------------------------+------------------------------------------ Reporter: blair at macports.org | Owner: pguyot at kallisys.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * milestone: => Port Bugs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 13:50:03 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 20:50:03 -0000 Subject: [MacPorts] #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist In-Reply-To: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> References: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> Message-ID: <064.cb2d4603cc9d10aa20d4d99923f8c6c0@macports.org> #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist ----------------------------------+----------------------------------------- Reporter: paulp at improving.org | Owner: blair at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: scala xml ----------------------------------+----------------------------------------- Changes (by blair at macports.org): * status: new => closed * resolution: => wontfix Comment: Reading the referred ticket, this looks like an issue with the multiple releases of 2.7.1 and the later tarball has this issue. Given that the Scala port uses the latest official release, I'm going to close this as won't fix. You may want to try re-downloading 2.7.1 and see that that version has the same issue. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 14:08:37 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 21:08:37 -0000 Subject: [MacPorts] #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist In-Reply-To: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> References: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> Message-ID: <064.262ba3a123d8f0a09d057ab97350f780@macports.org> #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist ----------------------------------+----------------------------------------- Reporter: paulp at improving.org | Owner: blair at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: scala xml ----------------------------------+----------------------------------------- Comment (by paulp at improving.org): I downloaded and tested 2.7.1 today before submitting the bug report. Are you saying this isn't the right distribution? http://www.scala-lang.org/downloads/distrib/files/scala-2.7.1.final.tar.gz That distribution does not exhibit the bug. The one in macports does. I don't understand why this would be wontfix. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 14:11:41 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 21:11:41 -0000 Subject: [MacPorts] #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist In-Reply-To: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> References: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> Message-ID: <064.f7e6fbe7239cc5c8dd7ff9a81520fe37@macports.org> #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist ----------------------------------+----------------------------------------- Reporter: paulp at improving.org | Owner: blair at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: scala xml ----------------------------------+----------------------------------------- Changes (by paulp at improving.org): * status: closed => reopened * resolution: wontfix => Comment: Oh, and the comments in the referred ticket are all about 2.7.0, not 2.7.1 - that's how old the bug is. (Only two months, but that's a long time in scala years.) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 14:15:33 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 21:15:33 -0000 Subject: [MacPorts] #15505: vips 7.14.4 update portfile for new version Message-ID: <053.cad6fa3d2441ad86c1e202bf5f5cb2d7@macports.org> #15505: vips 7.14.4 update portfile for new version ----------------------------------+----------------------------------------- Reporter: jcupitt at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: vips portfile update | ----------------------------------+----------------------------------------- vips has a new version out, here's an updated Portfile (I understand I'm the maintainer) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 14:18:28 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 21:18:28 -0000 Subject: [MacPorts] #15506: nip2 7.14.4 update portfile for new version Message-ID: <053.590aa2feb4fbb35986006f3223242e82@macports.org> #15506: nip2 7.14.4 update portfile for new version ----------------------------------+----------------------------------------- Reporter: jcupitt at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: nip2 portfile update | ----------------------------------+----------------------------------------- nip2 has a new version out, here's an updated Portfile -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 14:25:28 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 21:25:28 -0000 Subject: [MacPorts] #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist In-Reply-To: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> References: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> Message-ID: <064.55d44f434a37317782019a3079b427aa@macports.org> #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist ----------------------------------+----------------------------------------- Reporter: paulp at improving.org | Owner: blair at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: scala xml ----------------------------------+----------------------------------------- Changes (by blair at macports.org): * status: reopened => closed * resolution: => wontfix Comment: I'm closing this because the 2.7.1.final is being downloaded: {{{ port -d -v fetch scala DEBUG: Found port in file:///opt/local- development/var/macports/sources/rsync.macports.org/release/ports/lang/scala DEBUG: Changing to port directory: /opt/local- development/var/macports/sources/rsync.macports.org/release/ports/lang/scala DEBUG: Requested variant darwin is not provided by port scala. DEBUG: Requested variant i386 is not provided by port scala. DEBUG: Requested variant macosx is not provided by port scala. DEBUG: Executing org.macports.main (scala) ---> Fetching scala DEBUG: Executing org.macports.fetch (scala) ---> scala-2.7.1.final.tar.gz doesn't seem to exist in /opt/local- development/var/macports/distfiles/scala ---> Attempting to fetch scala-2.7.1.final.tar.gz from http://www.scala- lang.org/downloads/distrib/files/ % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 13.0M 100 13.0M 0 0 112k 0 0:01:58 0:01:58 --:--:-- 70180 }}} You may have downloaded an older version of the tarball if you did an upgrade of Scala in MacPorts immediately when the port was updated to 2.7.1. Try completely uninstalling scala, removing any packages for scala from ${prefix}/var/macports/packages and installing it again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 14:28:21 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 21:28:21 -0000 Subject: [MacPorts] #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist In-Reply-To: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> References: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> Message-ID: <064.b273161bb739552ac04c63c162172ee9@macports.org> #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist ----------------------------------+----------------------------------------- Reporter: paulp at improving.org | Owner: blair at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: scala xml ----------------------------------+----------------------------------------- Comment (by blair at macports.org): I bumped the revision number in r37341 to ensure that people get the latest Scala tarball. I should have done this in r36605. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 14:57:14 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 21:57:14 -0000 Subject: [MacPorts] #15507: ruby: enable parallel build Message-ID: <059.3720f8e769b252be503d1069ae5d92d2@macports.org> #15507: ruby: enable parallel build -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: pguyot at kallisys.net Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- I suggest that that the parallel build feature be enabled for ruby. It works for me with `buildmakejobs` set to `2`. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 14:58:20 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 21:58:20 -0000 Subject: [MacPorts] #15507: ruby: enable parallel build In-Reply-To: <059.3720f8e769b252be503d1069ae5d92d2@macports.org> References: <059.3720f8e769b252be503d1069ae5d92d2@macports.org> Message-ID: <068.57973f4bc6671b28b6c8255d9d4aa5b4@macports.org> #15507: ruby: enable parallel build --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: pguyot at kallisys.net Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * version: 1.6.0 => 1.7.0 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 15:15:11 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 22:15:11 -0000 Subject: [MacPorts] #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist In-Reply-To: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> References: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> Message-ID: <064.abae8e417b03e04dece92d01d7b4fde5@macports.org> #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist ----------------------------------+----------------------------------------- Reporter: paulp at improving.org | Owner: blair at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: scala xml ----------------------------------+----------------------------------------- Comment (by paulp at improving.org): You're right of course. I had a frack of a time getting it up to date, but after going on an rm-rf binge it finally came together. Thanks. FWIW I did do what I thought was a full uninstall-and-reinstall of the macports scala to confirm the bug before I submitted the report. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 15:19:43 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 22:19:43 -0000 Subject: [MacPorts] #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist In-Reply-To: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> References: <055.f240caf395b00b82163d54c7cc62a8f5@macports.org> Message-ID: <064.a4b83cadffde6f7f8f7f5bc8bdde0ea1@macports.org> #15503: scala 2.7.1 in macports includes bug(s) not in main 2.7.1 dist ----------------------------------+----------------------------------------- Reporter: paulp at improving.org | Owner: blair at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: scala xml ----------------------------------+----------------------------------------- Comment (by blair at macports.org): What I've seen is if you have the package in /opt/local/var/macports/packages/darwin/XXX/ and still do an uninstall and a install, somewhere in the install step it'll just unpack the package and use that, which is a waste of a build. So I always manually rm the package. The most recent update to the revision on the port should force everyone to have the same tarball. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 15:37:30 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 22:37:30 -0000 Subject: [MacPorts] #15482: Custom keyboard layouts and vim-app In-Reply-To: <054.d04519513faa503dad95826494324898@macports.org> References: <054.d04519513faa503dad95826494324898@macports.org> Message-ID: <063.e341e7d5d82aa0339f510cfd30fa998c@macports.org> #15482: Custom keyboard layouts and vim-app ---------------------------------+------------------------------------------ Reporter: themolok at gmail.com | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by themolok at gmail.com): The people of vim-mac at vim.org explained me that Vim.app is not really maintained at all. They suggest to use MacVim or vim-cocoa instead (I prefer MacVim), and both don't have the keyboard layout bug. Anyway, this is an upstream problem, and you can close this bug report IMHO. Sorry for the noise :) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 16:00:20 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 23:00:20 -0000 Subject: [MacPorts] #15450: mtr unable to resolve hostname arguements on Mac OS X 10.5.3 In-Reply-To: <058.d6323bdd20fc742546588d35e8f3a399@macports.org> References: <058.d6323bdd20fc742546588d35e8f3a399@macports.org> Message-ID: <067.19b5e6e8d062b0fcc05f75b9bbe5aa21@macports.org> #15450: mtr unable to resolve hostname arguements on Mac OS X 10.5.3 -------------------------------------+-------------------------------------- Reporter: bahamat at digitalelf.net | Owner: mr_bond at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: 10.5.3 -------------------------------------+-------------------------------------- Changes (by mr_bond at macports.org): * status: new => closed * resolution: => fixed Comment: Thanks, fixed in r37346 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 16:07:25 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 23:07:25 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.d39a488b3005e736df76f65632ce8f03@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by macports at flyn.org): I have the "boxes instead of text" problem with gnumeric, gimp and inkscape, when installed using cairo 1.6.4 and +no_x11+quartz+pdf. I tried downgrading to cairo 1.4.14 to fix this problem. The old Portfile may be found in [http://trac.macports.org/browser/trunk/dports/graphics/cairo/Portfile?rev=32918&format=raw subversion]. I installed this at /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo/Portfile and executed "sudo port install cairo +quartz+pdf+no_x11." Cairo built fine, but the applications no longer worked, because gnumeric, gimp and inkscape require the newer version of cairo: $ gnumeric dyld: Library not loaded: /opt/local/lib/libcairo.2.dylib Referenced from: /opt/local/lib/libgoffice-0.6.6.dylib Reason: Incompatible library version: libgoffice-0.6.6.dylib requires version 20.0.0 or later, but libcairo.2.dylib provides version 14.0.0 Trace/BPT trap -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 16:22:54 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 23:22:54 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.d945e3da7ba96fdf807e49e6ede0f5d8@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by macports at flyn.org): I just reported this [https://bugs.freedesktop.org/show_bug.cgi?id=16220 upstream]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 16:33:55 2008 From: noreply at macports.org (MacPorts) Date: Tue, 03 Jun 2008 23:33:55 -0000 Subject: [MacPorts] #15508: install of transfig 3.2.5_0 produces: Warning: transfig violates the layout of the ports-filesystems! Message-ID: <059.76e860b22c347277724bffdeac3aa8b1@macports.org> #15508: install of transfig 3.2.5_0 produces: Warning: transfig violates the layout of the ports-filesystems! -------------------------------------+-------------------------------------- Reporter: davidh at ipac.caltech.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- Installing xfig on a g5, Tiger system required transfig. The following diagnostics appeared: ---> Staging transfig into destroot Warning: violation by /usr Warning: transfig violates the layout of the ports-filesystems! Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases! ---> Installing transfig 3.2.5_0 ---> Activating transfig 3.2.5_0 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 17:42:24 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 00:42:24 -0000 Subject: [MacPorts] #15482: Custom keyboard layouts and vim-app In-Reply-To: <054.d04519513faa503dad95826494324898@macports.org> References: <054.d04519513faa503dad95826494324898@macports.org> Message-ID: <063.06a6d9495cc6cca80c6c260bf01fb553@macports.org> #15482: Custom keyboard layouts and vim-app ---------------------------------+------------------------------------------ Reporter: themolok at gmail.com | Owner: raimue at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: invalid | Keywords: ---------------------------------+------------------------------------------ Changes (by raimue at macports.org): * status: assigned => closed * resolution: => invalid * milestone: => Port Bugs Comment: I already thought about creating a port for MacVim and/or vim-cocoa, but the problem back then was that they did not release proper source tarballs. Maybe that changed and I should look into it again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 21:26:10 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 04:26:10 -0000 Subject: [MacPorts] #15463: patch for postfix- upgrade to v2.5.2 In-Reply-To: <054.5b69a4bbf782157213ed6401def0d56e@macports.org> References: <054.5b69a4bbf782157213ed6401def0d56e@macports.org> Message-ID: <063.4c0b2c95d11a791d43dea1a465c94700@macports.org> #15463: patch for postfix- upgrade to v2.5.2 ---------------------------------+------------------------------------------ Reporter: markd at macports.org | Owner: wsiegrist at apple.com Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ---------------------------------+------------------------------------------ Changes (by wsiegrist at apple.com): * status: new => closed * resolution: => fixed Comment: You committed this in r37338. :) Thanks again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 22:32:17 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 05:32:17 -0000 Subject: [MacPorts] #15509: git-core update to 1.5.5.3 Message-ID: <054.190925a138d97427f8a8ffa7bce3f573@macports.org> #15509: git-core update to 1.5.5.3 -------------------------------------+-------------------------------------- Reporter: maccheck at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: git-core Portfile patch | -------------------------------------+-------------------------------------- This is the patch file to update git-core from 1.5.5.1 to 1.5.5.3 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 3 23:02:41 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 06:02:41 -0000 Subject: [MacPorts] #15476: python25 build failure In-Reply-To: <049.20f55f2a0cec0ace5cb7bc25cc3414f6@macports.org> References: <049.20f55f2a0cec0ace5cb7bc25cc3414f6@macports.org> Message-ID: <058.7a93680bf5c9a4fc62cb89e9171c80c3@macports.org> #15476: python25 build failure ----------------------------+----------------------------------------------- Reporter: ewira at free.fr | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ----------------------------+----------------------------------------------- Comment (by ewira at free.fr): ok this is working now, Gnumeric is installed, thanks for the help. Will -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 01:36:33 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 08:36:33 -0000 Subject: [MacPorts] #11759: BUG: case-sensitive port uninstall In-Reply-To: <057.05b84e956a5a63148034c136dcfb3720@macports.org> References: <057.05b84e956a5a63148034c136dcfb3720@macports.org> Message-ID: <066.cd8df5440a2dc3213d7426a7333b88a1@macports.org> #11759: BUG: case-sensitive port uninstall ------------------------------------+--------------------------------------- Reporter: yunzheng.hu at gmail.com | Owner: eridius at macports.org Type: defect | Status: assigned Priority: High | Milestone: MacPorts 1.6.1 Component: base | Version: Resolution: | Keywords: port uninstall case-sensitive ------------------------------------+--------------------------------------- Comment (by jmr at macports.org): Committed to trunk in r37349, now that I've tested that upgrade still works properly. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 01:47:50 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 08:47:50 -0000 Subject: [MacPorts] #12765: hydra needs libssh-0.11, won't compile with 0.2 In-Reply-To: <057.02b32bc7b95912c0773c026428a4b922@macports.org> References: <057.02b32bc7b95912c0773c026428a4b922@macports.org> Message-ID: <066.05fd5ad09a262cc10802643892df3973@macports.org> #12765: hydra needs libssh-0.11, won't compile with 0.2 ------------------------------------+--------------------------------------- Reporter: caimi.marco at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Changes (by ryandesign at macports.org): * owner: => ryandesign at macports.org * status: new => assigned Comment: FYI: hydra still fails to compile if libssh is present. To work around this for now, deactivate libssh before installing hydra. I'm working on a better fix. Please stand by. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 03:02:14 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 10:02:14 -0000 Subject: [MacPorts] #12765: hydra needs libssh-0.11, won't compile with 0.2 In-Reply-To: <057.02b32bc7b95912c0773c026428a4b922@macports.org> References: <057.02b32bc7b95912c0773c026428a4b922@macports.org> Message-ID: <066.da3e502bedb79462b01ab8a23c755d42@macports.org> #12765: hydra needs libssh-0.11, won't compile with 0.2 ------------------------------------+--------------------------------------- Reporter: caimi.marco at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ------------------------------------+--------------------------------------- Changes (by ryandesign at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed a new port libssh01 and updates to hydra to use it in r37351. Several other fixes for hydra in that commit; read the log message. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 11:53:03 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 18:53:03 -0000 Subject: [MacPorts] #15510: please bump version for ntfs-3g Message-ID: <064.ae297bbc3c5e28708ed8650040145870@macports.org> #15510: please bump version for ntfs-3g ------------------------------------------+--------------------------------- Reporter: vladimir.endaltcev at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: ntfs-3g | ------------------------------------------+--------------------------------- sudo port install ntfs-3g[[BR]] ---> Fetching ntfs-3g[[BR]] ---> Attempting to fetch ntfs-3g-1.2412.tgz from http://www.ntfs-3g.org/ [[BR]] ---> Attempting to fetch ntfs-3g-1.2412.tgz from http://svn.macports.org/repository/macports/distfiles/ntfs-3g [[BR]] ---> Attempting to fetch ntfs-3g-1.2412.tgz from http://svn.macports.org/repository/macports/distfiles/general/ [[BR]] ---> Attempting to fetch ntfs-3g-1.2412.tgz from http://svn.macports.org/repository/macports/downloads/ntfs-3g [[BR]] Error: Target org.macports.fetch returned: fetch failed[[BR]] Error: Status 1 encountered during processing.[[BR]] [[BR]] Per www.ntfs-3g.org latest version is 1.2531. In portfile ? 1.2412. In macports.org repository ? 1.1120. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 12:44:16 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 19:44:16 -0000 Subject: [MacPorts] #14886: pandoc fails to build In-Reply-To: <063.7eed5387784397d569dafd87f1652a89@macports.org> References: <063.7eed5387784397d569dafd87f1652a89@macports.org> Message-ID: <072.631a00e0cedc3fe6bf5aa81643b593b6@macports.org> #14886: pandoc fails to build ------------------------------------------+--------------------------------- Reporter: shreevatsa.public at gmail.com | Owner: dluke at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------------+--------------------------------- Changes (by dluke at macports.org): * owner: macports-tickets at lists.macosforge.org => dluke at macports.org * status: new => assigned Comment: Looking at this now... -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 12:46:56 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 19:46:56 -0000 Subject: [MacPorts] #14886: pandoc fails to build In-Reply-To: <063.7eed5387784397d569dafd87f1652a89@macports.org> References: <063.7eed5387784397d569dafd87f1652a89@macports.org> Message-ID: <072.8200fb4a46fbc664b1c5fff3ecb86e3c@macports.org> #14886: pandoc fails to build ------------------------------------------+--------------------------------- Reporter: shreevatsa.public at gmail.com | Owner: dluke at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ------------------------------------------+--------------------------------- Changes (by dluke at macports.org): * status: assigned => closed * resolution: => fixed Comment: patch committed in r37362 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 13:39:39 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 20:39:39 -0000 Subject: [MacPorts] #15510: please bump version for ntfs-3g In-Reply-To: <064.ae297bbc3c5e28708ed8650040145870@macports.org> References: <064.ae297bbc3c5e28708ed8650040145870@macports.org> Message-ID: <073.d858f64c3423e3b7a54b96210b247e05@macports.org> #15510: please bump version for ntfs-3g -------------------------------------------+-------------------------------- Reporter: vladimir.endaltcev at gmail.com | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: ntfs-3g -------------------------------------------+-------------------------------- Changes (by raimue at macports.org): * owner: macports-tickets at lists.macosforge.org => eridius at macports.org Comment: Assigning to maintainer -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 14:04:15 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 21:04:15 -0000 Subject: [MacPorts] #15509: git-core update to 1.5.5.3 In-Reply-To: <054.190925a138d97427f8a8ffa7bce3f573@macports.org> References: <054.190925a138d97427f8a8ffa7bce3f573@macports.org> Message-ID: <063.b3af9f3b2fc7f4b24ae64a024d5d5b99@macports.org> #15509: git-core update to 1.5.5.3 ---------------------------------+------------------------------------------ Reporter: maccheck at gmail.com | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: git-core Portfile patch ---------------------------------+------------------------------------------ Changes (by raimue at macports.org): * cc: openmaintainer at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => raimue at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 14:43:24 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 21:43:24 -0000 Subject: [MacPorts] #15509: git-core update to 1.5.5.3 In-Reply-To: <054.190925a138d97427f8a8ffa7bce3f573@macports.org> References: <054.190925a138d97427f8a8ffa7bce3f573@macports.org> Message-ID: <063.bc3f757d0d03eb68ec2557f93dd37adb@macports.org> #15509: git-core update to 1.5.5.3 ---------------------------------+------------------------------------------ Reporter: maccheck at gmail.com | Owner: raimue at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: git-core Portfile patch ---------------------------------+------------------------------------------ Changes (by raimue at macports.org): * status: assigned => closed * resolution: => fixed Comment: Comitted in r37366. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 15:17:15 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 22:17:15 -0000 Subject: [MacPorts] #15511: libgtkhtml312-3.12.3 'G_GNUC_FUNCTION' undeclared Message-ID: <054.9871ab52a1dfb41e51fb5cbf0689028f@macports.org> #15511: libgtkhtml312-3.12.3 'G_GNUC_FUNCTION' undeclared --------------------------------+------------------------------------------- Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- I can not install libgtkhtml312[[BR]] The log message:[[BR]] bash-3.2$ sudo port install libgtkhtml312 ---> Building libgtkhtml312 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgtkhtml312/work/gtkhtml-3.12.3" && make all " returned error 2 Command output: make all-recursive Making all in a11y make[2]: Nothing to be done for `all'. Making all in src if /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I/opt/local/include -DORBIT2=1 -D_REENTRANT -DXTHREADS -I/opt/local/include/libgnomeui-2.0 -I/opt/local/include/libart-2.0 -I/opt/local/include/gconf/2 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libgnome-2.0 -I/opt/local/include/libbonoboui-2.0 -I/opt/local/include/libgnomecanvas-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include -I/opt/local/include/orbit-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo- activation-2.0 -I/opt/local/include/libxml2 -I/opt/local/include/pango-1.0 -I/opt/local/include/gail-1.0 -I/opt/local/include/freetype2 -I/opt/local/include/atk-1.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/cairo -I/opt/local/include/libpng12 -I/usr/X11/include -I/opt/local/include/pixman-1 -I/opt/local/include/libgnomeprintui-2.2 -I/opt/local/include/libgnomeprint-2.2 -I/opt/local/include/libglade-2.0 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN=\"gtkhtml-3.8\" -DBONOBO_EXPLICIT_TRANSLATION_DOMAIN=\"gtkhtml-3.8\" -DG_LOG_DOMAIN=\"gtkhtml\" -I/opt/local/include -DGDK_DISABLE_DEPRECATED=1 -DG_DISABLE_DEPRECATED=1 -DGNOME_DISABLE_DEPRECATED=1 -DPREFIX=\""/opt/local"\" -DLIBDIR=\""/opt/local/share"\" -DDATADIR=\""/opt/local/share"\" -DSYSCONFDIR=\""/opt/local/etc"\" -DICONDIR=\"/opt/local/share/gtkhtml-3.8/icons\" -DGTKHTML_DATADIR=\""/opt/local/share/gtkhtml-3.8"\" -DGLADE_DATADIR=\"/opt/local/share/gtkhtml-3.8\" -DGNOMELOCALEDIR=\""/opt/local/share/locale"\" -O2 -Wall -Wmissing- prototypes -MT htmlengine-edit-clueflowstyle.lo -MD -MP -MF ".deps /htmlengine-edit-clueflowstyle.Tpo" -c -o htmlengine-edit-clueflowstyle.lo htmlengine-edit-clueflowstyle.c; \ then mv -f ".deps/htmlengine-edit-clueflowstyle.Tpo" ".deps /htmlengine-edit-clueflowstyle.Plo"; else rm -f ".deps/htmlengine-edit- clueflowstyle.Tpo"; exit 1; fi /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I/opt/local/include -DORBIT2=1 -D_REENTRANT -DXTHREADS -I/opt/local/include/libgnomeui-2.0 -I/opt/local/include/libart-2.0 -I/opt/local/include/gconf/2 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libgnome-2.0 -I/opt/local/include/libbonoboui-2.0 -I/opt/local/include/libgnomecanvas-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include -I/opt/local/include/orbit-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo- activation-2.0 -I/opt/local/include/libxml2 -I/opt/local/include/pango-1.0 -I/opt/local/include/gail-1.0 -I/opt/local/include/freetype2 -I/opt/local/include/atk-1.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/cairo -I/opt/local/include/libpng12 -I/usr/X11/include -I/opt/local/include/pixman-1 -I/opt/local/include/libgnomeprintui-2.2 -I/opt/local/include/libgnomeprint-2.2 -I/opt/local/include/libglade-2.0 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN=\"gtkhtml-3.8\" -DBONOBO_EXPLICIT_TRANSLATION_DOMAIN=\"gtkhtml-3.8\" -DG_LOG_DOMAIN=\"gtkhtml\" -I/opt/local/include -DGDK_DISABLE_DEPRECATED=1 -DG_DISABLE_DEPRECATED=1 -DGNOME_DISABLE_DEPRECATED=1 -DPREFIX=\"/opt/local\" -DLIBDIR=\"/opt/local/share\" -DDATADIR=\"/opt/local/share\" -DSYSCONFDIR=\"/opt/local/etc\" -DICONDIR=\"/opt/local/share/gtkhtml-3.8/icons\" -DGTKHTML_DATADIR=\"/opt/local/share/gtkhtml-3.8\" -DGLADE_DATADIR=\"/opt/local/share/gtkhtml-3.8\" -DGNOMELOCALEDIR=\"/opt/local/share/locale\" -O2 -Wall -Wmissing- prototypes -MT htmlengine-edit-clueflowstyle.lo -MD -MP -MF .deps /htmlengine-edit-clueflowstyle.Tpo -c htmlengine-edit-clueflowstyle.c -fno-common -DPIC -o .libs/htmlengine-edit-clueflowstyle.o htmlengine-edit-clueflowstyle.c: In function 'undo_or_redo': htmlengine-edit-clueflowstyle.c:177: error: 'G_GNUC_FUNCTION' undeclared (first use in this function) htmlengine-edit-clueflowstyle.c:177: error: (Each undeclared identifier is reported only once htmlengine-edit-clueflowstyle.c:177: error: for each function it appears in.) htmlengine-edit-clueflowstyle.c: In function 'set_clueflow_style_in_region': htmlengine-edit-clueflowstyle.c:282: error: 'G_GNUC_FUNCTION' undeclared (first use in this function) make[2]: *** [htmlengine-edit-clueflowstyle.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 16:22:49 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 23:22:49 -0000 Subject: [MacPorts] #15512: netatalk fails to build on Leopard Message-ID: <053.eee936ff5b9b3f25c91a52f1982262a9@macports.org> #15512: netatalk fails to build on Leopard -------------------------------+-------------------------------------------- Reporter: gold at xmission.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- Attempting to install netatalk on Leopard fails with the following errors: ndefined symbols: "_iconv_open", referenced from: _atalk_iconv_open in libatalk.a(iconv.lo) _atalk_iconv_open in libatalk.a(iconv.lo) "_iconv", referenced from: _sys_iconv in libatalk.a(iconv.lo) _sys_iconv in libatalk.a(iconv.lo) "_iconv_close", referenced from: _atalk_iconv_close in libatalk.a(iconv.lo) _atalk_iconv_close in libatalk.a(iconv.lo) _atalk_iconv_close in libatalk.a(iconv.lo) ld: symbol(s) not found collect2: ld returned 1 exit status make[3]: *** [getzones] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Warning: the following items did not execute (for netatalk): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. The attached patch fixes this by telling the configure script to look for libiconv in /opt/local. Also attached my /etc/pam.d/netatalk and /Library/LaunchDaemons/org.macports.netatalk.plist. I doubt either of them is optimal, but they work for me. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 16:31:53 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 23:31:53 -0000 Subject: [MacPorts] #15502: Build qt4-mac plugins as bundles instead of dylibs In-Reply-To: <057.25e9d6406e95babe20977f97cf9936bb@macports.org> References: <057.25e9d6406e95babe20977f97cf9936bb@macports.org> Message-ID: <066.138a6c7af5c18f6fa87c0ba2be39cc8b@macports.org> #15502: Build qt4-mac plugins as bundles instead of dylibs ------------------------------------+--------------------------------------- Reporter: clubjuggler at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: qt4-mac, kde4-mac ------------------------------------+--------------------------------------- Changes (by erickt at macports.org): * status: new => closed * resolution: => fixed Comment: commited in r37370. Thanks again! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 16:38:57 2008 From: noreply at macports.org (MacPorts) Date: Wed, 04 Jun 2008 23:38:57 -0000 Subject: [MacPorts] #15353: qt4-mac: pkg-config files in incorrect location In-Reply-To: <057.849a48fbf80e779ad2a5624d761243c5@macports.org> References: <057.849a48fbf80e779ad2a5624d761243c5@macports.org> Message-ID: <066.acd177d364e3d7f263a75cc5c14c99a0@macports.org> #15353: qt4-mac: pkg-config files in incorrect location ------------------------------------+--------------------------------------- Reporter: clubjuggler at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by clubjuggler at gmail.com): This has been fixed with commit r37370 and can now be closed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 17:01:45 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 00:01:45 -0000 Subject: [MacPorts] #15353: qt4-mac: pkg-config files in incorrect location In-Reply-To: <057.849a48fbf80e779ad2a5624d761243c5@macports.org> References: <057.849a48fbf80e779ad2a5624d761243c5@macports.org> Message-ID: <066.d8937c8dbf02cf10f99c2efaf790ae26@macports.org> #15353: qt4-mac: pkg-config files in incorrect location ------------------------------------+--------------------------------------- Reporter: clubjuggler at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ------------------------------------+--------------------------------------- Changes (by erickt at macports.org): * status: new => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 19:24:52 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 02:24:52 -0000 Subject: [MacPorts] #15508: install of transfig 3.2.5_0 produces: Warning: transfig violates the layout of the ports-filesystems! In-Reply-To: <059.76e860b22c347277724bffdeac3aa8b1@macports.org> References: <059.76e860b22c347277724bffdeac3aa8b1@macports.org> Message-ID: <068.a6811ee945448732b4d2f73bfb9aaa49@macports.org> #15508: install of transfig 3.2.5_0 produces: Warning: transfig violates the layout of the ports-filesystems! --------------------------------------+------------------------------------- Reporter: davidh at ipac.caltech.edu | Owner: pguyot at kallisys.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => pguyot at kallisys.net * milestone: => Port Bugs Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 19:30:08 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 02:30:08 -0000 Subject: [MacPorts] #15510: please bump version for ntfs-3g In-Reply-To: <064.ae297bbc3c5e28708ed8650040145870@macports.org> References: <064.ae297bbc3c5e28708ed8650040145870@macports.org> Message-ID: <073.3f4b5ec101574b72e46867f444b7a45a@macports.org> #15510: please bump version for ntfs-3g -------------------------------------------+-------------------------------- Reporter: vladimir.endaltcev at gmail.com | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: ntfs-3g -------------------------------------------+-------------------------------- Comment (by jmr at macports.org): You can get 1.2412 from http://distfiles.macports.org/ntfs-3g/, BTW. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 19:41:32 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 02:41:32 -0000 Subject: [MacPorts] #15511: libgtkhtml312-3.12.3 'G_GNUC_FUNCTION' undeclared In-Reply-To: <054.9871ab52a1dfb41e51fb5cbf0689028f@macports.org> References: <054.9871ab52a1dfb41e51fb5cbf0689028f@macports.org> Message-ID: <063.f131a8d2ad2b61f3ef111edebad8db32@macports.org> #15511: libgtkhtml312-3.12.3 'G_GNUC_FUNCTION' undeclared ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: jmr at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned Comment: Looks like another case of #14656. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 19:41:50 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 02:41:50 -0000 Subject: [MacPorts] #15512: netatalk fails to build on Leopard In-Reply-To: <053.eee936ff5b9b3f25c91a52f1982262a9@macports.org> References: <053.eee936ff5b9b3f25c91a52f1982262a9@macports.org> Message-ID: <062.7e142c12f7bc83eb7692d6ca94d9a782@macports.org> #15512: netatalk fails to build on Leopard --------------------------------+------------------------------------------- Reporter: gold at xmission.com | Owner: jmr at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned * milestone: => Port Bugs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 19:51:50 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 02:51:50 -0000 Subject: [MacPorts] #15511: libgtkhtml312-3.12.3 'G_GNUC_FUNCTION' undeclared In-Reply-To: <054.9871ab52a1dfb41e51fb5cbf0689028f@macports.org> References: <054.9871ab52a1dfb41e51fb5cbf0689028f@macports.org> Message-ID: <063.d38ae0a6011775dca97ff04f9553b5ae@macports.org> #15511: libgtkhtml312-3.12.3 'G_GNUC_FUNCTION' undeclared ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: jmr at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Fixed in r37374. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 19:58:25 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 02:58:25 -0000 Subject: [MacPorts] #15513: enscript fails to configure with error: conditional "AMDEP" was never defined. Error: Status 1 Message-ID: <051.abdee340f4899522aad3e6ae0ed30bb6@macports.org> #15513: enscript fails to configure with error: conditional "AMDEP" was never defined. Error: Status 1 -----------------------------+---------------------------------------------- Reporter: schultz at seai.us | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | -----------------------------+---------------------------------------------- The port "enscript" fails to install with the message: configure: error: conditional "AMDEP" was never defined. Usually this means the macro was only invoked conditionally. Error: Status 1 encountered during processing. Port version 1.600 running on a PowerBook G4 with MacOS X 10.4 (Tiger) Regarding priority: I use this tool in many of my scripts for printing the source code that I develop. I can get around it by using other computers, but having it on my laptop is very helpful. Thanks -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 20:09:07 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 03:09:07 -0000 Subject: [MacPorts] #15512: netatalk fails to build on Leopard In-Reply-To: <053.eee936ff5b9b3f25c91a52f1982262a9@macports.org> References: <053.eee936ff5b9b3f25c91a52f1982262a9@macports.org> Message-ID: <062.5ed245bd0ffe9c86b57f7d7919b98914@macports.org> #15512: netatalk fails to build on Leopard --------------------------------+------------------------------------------- Reporter: gold at xmission.com | Owner: jmr at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Thanks, fixed in r37375. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 21:01:55 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 04:01:55 -0000 Subject: [MacPorts] #15514: reinplace should warn if nothing got replaced Message-ID: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> #15514: reinplace should warn if nothing got replaced -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: base | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- What's always bugged me about reinplace is that you get no notification if nothing got replaced, which will probably bite you later. If you use a patchfile to modify a file, and the patch is out of date, the patch fails to apply and the port command exits with an error. This is good; it alerts the port author to the situation and they can fix it by changing or removing the patch. But with reinplace, if the underlying file you're modifying has changed such that the reinplace no longer causes anything to change, you get no warning and the port command proceeds. I think the correct behavior might ultimately be to error out entirely if a reinplace doesn't change a file, just like we do with failed patches. But as a first step, to get port authors used to this change, it might be friendlier to just print a warning for now. The attached patch adds a warning if a reinplace doesn't change the underlying file. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 21:05:46 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 04:05:46 -0000 Subject: [MacPorts] #15514: reinplace should warn if nothing got replaced In-Reply-To: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> References: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> Message-ID: <068.5164409f9a739dd27a4e9f250fe249e7@macports.org> #15514: reinplace should warn if nothing got replaced --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * milestone: Port Enhancements => MacPorts base enhancements -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 21:46:10 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 04:46:10 -0000 Subject: [MacPorts] #15485: RFE: Use distfiles mirror and fallback also for URLs with tags In-Reply-To: <055.63b6ce3e7f93d624acb4f19aa3a78afe@macports.org> References: <055.63b6ce3e7f93d624acb4f19aa3a78afe@macports.org> Message-ID: <064.0eae233fc0a2dfc13f1d2de466343959@macports.org> #15485: RFE: Use distfiles mirror and fallback also for URLs with tags ----------------------------------+----------------------------------------- Reporter: raimue at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: distfiles mirror fallback ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * component: ports => base -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 22:09:24 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 05:09:24 -0000 Subject: [MacPorts] #15514: reinplace should warn if nothing got replaced In-Reply-To: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> References: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> Message-ID: <068.699016328319634bf67e036a133bc840@macports.org> #15514: reinplace should warn if nothing got replaced --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by jkh at apple.com): This behavior should be made conditional. There are legitimate usage cases where a replacement might "fail", and before deciding whether this new behavior should be the default or not it should also be tested out in the ports tree to see how many ports actually break with the new behavior. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 22:21:50 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 05:21:50 -0000 Subject: [MacPorts] #15514: reinplace should warn if nothing got replaced In-Reply-To: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> References: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> Message-ID: <068.85186d75af8403f0d1767304bd6df05a@macports.org> #15514: reinplace should warn if nothing got replaced --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): I agree it should be tested. I've been meaning to reinstall MacPorts in a different prefix, so I may take this opportunity to do that and reinstall all the ports I use and see if my new warning appears anywhere. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 23:40:12 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 06:40:12 -0000 Subject: [MacPorts] #15510: please bump version for ntfs-3g In-Reply-To: <064.ae297bbc3c5e28708ed8650040145870@macports.org> References: <064.ae297bbc3c5e28708ed8650040145870@macports.org> Message-ID: <073.b76d51c2da54bb37ef1490811fb3874d@macports.org> #15510: please bump version for ntfs-3g -------------------------------------------+-------------------------------- Reporter: vladimir.endaltcev at gmail.com | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: ntfs-3g -------------------------------------------+-------------------------------- Comment (by vladimir.endaltcev at gmail.com): Replying to [comment:2 jmr at macports.org]: > You can get 1.2412 from http://distfiles.macports.org/ntfs-3g/, BTW. Do I have to change portfile? Simple port fetch ntfs-3g doesn't work... -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 4 23:44:58 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 06:44:58 -0000 Subject: [MacPorts] #15515: "port provides" broken in trunk Message-ID: <059.42a726780156c09a2b6b560c1db4c0e5@macports.org> #15515: "port provides" broken in trunk -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- "`port provides`" seems to be broken in trunk (@37376). Not sure yet when this problem appeared. This is with Mac OS X 10.4.11 and Xcode 2.4.1 on Intel. {{{ $ /mp/bin/port provides foo list must have an even number of elements while executing "array set portspec { foo }" ("uplevel" body line 1) invoked from within "uplevel 1 "array set portspec { $portspec }"" (procedure "foreachport" line 6) invoked from within "foreachport $portlist { set file [compat filenormalize $portname] if {[file exists $file]} { if {![file isdirectory $file]..." (procedure "action_provides" line 9) invoked from within "$action_proc $action $portlist [array get global_options]" (procedure "process_cmd" line 86) invoked from within "process_cmd $remaining_args" invoked from within "if { [llength $remaining_args] > 0 } { # If there are remaining arguments, process those as a command # Exit immediately, by default, unless..." (file "/mp/bin/port" line 3165) $ }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 00:13:03 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 07:13:03 -0000 Subject: [MacPorts] #15515: "port provides" broken in trunk In-Reply-To: <059.42a726780156c09a2b6b560c1db4c0e5@macports.org> References: <059.42a726780156c09a2b6b560c1db4c0e5@macports.org> Message-ID: <068.2195aa582bdbe33a37f1222391f66c9f@macports.org> #15515: "port provides" broken in trunk --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * cc: raimue at macports.org (added) Comment: It looks like r37238 caused this. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 01:23:57 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 08:23:57 -0000 Subject: [MacPorts] #15516: wakeonlan: turn off universal variant Message-ID: <059.eddbfe6f684989ff6b072b4d1e003000@macports.org> #15516: wakeonlan: turn off universal variant -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- wakeonlan doesn't install any binaries (only installs a perl script and documentation) so you should add "`universal_variant no`" to the portfile to turn off the universal variant. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 03:26:16 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 10:26:16 -0000 Subject: [MacPorts] #15515: "port provides" broken in trunk In-Reply-To: <059.42a726780156c09a2b6b560c1db4c0e5@macports.org> References: <059.42a726780156c09a2b6b560c1db4c0e5@macports.org> Message-ID: <068.32eb2b835c598aaa6c327bfeda121cc0@macports.org> #15515: "port provides" broken in trunk --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by raimue at macports.org): * owner: macports-tickets at lists.macosforge.org => raimue at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 03:37:24 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 10:37:24 -0000 Subject: [MacPorts] #15515: "port provides" broken in trunk In-Reply-To: <059.42a726780156c09a2b6b560c1db4c0e5@macports.org> References: <059.42a726780156c09a2b6b560c1db4c0e5@macports.org> Message-ID: <068.3b95bcf76c8b8333a791bdf66d0e0d41@macports.org> #15515: "port provides" broken in trunk --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: raimue at macports.org Type: defect | Status: closed Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by raimue at macports.org): * status: assigned => closed * resolution: => fixed Comment: Sorry, that was my mistake. While I changed the definition of the action to get an unexpanded argument list, I didn't change the action itself to operate on a list of strings instead of ports. Thanks for the report. Fixed in r37386. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 03:39:46 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 10:39:46 -0000 Subject: [MacPorts] #15341: ImageMagick checksum mismatches In-Reply-To: <057.cec29f15cd256ba0bdebef694d298d57@macports.org> References: <057.cec29f15cd256ba0bdebef694d298d57@macports.org> Message-ID: <066.29ffd0520097e8e5000d4aad0b604ca7@macports.org> #15341: ImageMagick checksum mismatches ------------------------------------+--------------------------------------- Reporter: shirose at jamstec.go.jp | Owner: ryandesign at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * status: closed => reopened * resolution: fixed => * summary: ImageMagick: 6.4.1-2 Checksum Error => ImageMagick checksum mismatches Comment: This has popped up again with 6.4.1-5. The distfile from SourceForge has different checksums than those in the portfile, while the one from ftp.imagemagick.net matches. (I didn't check the other mirrors.) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 03:43:38 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 10:43:38 -0000 Subject: [MacPorts] #15510: please bump version for ntfs-3g In-Reply-To: <064.ae297bbc3c5e28708ed8650040145870@macports.org> References: <064.ae297bbc3c5e28708ed8650040145870@macports.org> Message-ID: <073.80e4def4fa2307baf09c22cf9161b438@macports.org> #15510: please bump version for ntfs-3g -------------------------------------------+-------------------------------- Reporter: vladimir.endaltcev at gmail.com | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: ntfs-3g -------------------------------------------+-------------------------------- Comment (by raimue at macports.org): You don't have to change the Portfile, just use this command: {{{ sudo env MASTER_SITES_LOCAL=http://distfiles.macports.org/ntfs-3g port -v fetch ntfs-3g }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 07:01:37 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 14:01:37 -0000 Subject: [MacPorts] #15510: please bump version for ntfs-3g In-Reply-To: <064.ae297bbc3c5e28708ed8650040145870@macports.org> References: <064.ae297bbc3c5e28708ed8650040145870@macports.org> Message-ID: <073.36a50825004154e8db0eacca19a99ee0@macports.org> #15510: please bump version for ntfs-3g -------------------------------------------+-------------------------------- Reporter: vladimir.endaltcev at gmail.com | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: ntfs-3g -------------------------------------------+-------------------------------- Comment (by vladimir.endaltcev at gmail.com): Replying to [comment:4 raimue at macports.org]: > You don't have to change the Portfile, just use this command: > {{{ > sudo env MASTER_SITES_LOCAL=http://distfiles.macports.org/ntfs-3g port -v fetch ntfs-3g > }}} Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 07:39:33 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 14:39:33 -0000 Subject: [MacPorts] #15517: pango error install; No such file or directory Message-ID: <058.b07bc7aaaa63d922e42bf343f9806a34@macports.org> #15517: pango error install; No such file or directory ------------------------------------+--------------------------------------- Reporter: esben_kaufmann at msn.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: pango | ------------------------------------+--------------------------------------- I need pango to install "playerstage-stage" and I get the following error when trying to install pango: ---> Configuring pango Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_pango/work/pango-1.20.3" && ./configure --prefix=/opt/local --enable-static --enable-cairo " returned error 1 Command output: sh: line 0: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_pango/work/pango-1.20.3: No such file or directory -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 08:47:45 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 15:47:45 -0000 Subject: [MacPorts] #15518: snort-2.6.1.5 patches to add postgresql83 variant Message-ID: <052.bb9076925adb65d990b6b0740cd36813@macports.org> #15518: snort-2.6.1.5 patches to add postgresql83 variant ---------------------------------------+------------------------------------ Reporter: adioso at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: snort 2.6.1.5 postgreql83 | ---------------------------------------+------------------------------------ Here are 2 patches to add a postgresql83 variant. This is my first ticket so I hope I have everything correct. These patches were created against 1.6.0. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 09:19:14 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 16:19:14 -0000 Subject: [MacPorts] #15519: New port: surfraw 2.2.1 Message-ID: <064.48dcd7d70c2bf480ea56c29e2f0a125e@macports.org> #15519: New port: surfraw 2.2.1 ------------------------------------------+--------------------------------- Reporter: alistair.israel at acuityph.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: surfraw | ------------------------------------------+--------------------------------- A port of Surfraw - Shell Users' Revolutionary Front Rage Against the Web. http://surfraw.alioth.debian.org/ {{{ sudo port install surfraw ---> Fetching surfraw ---> Verifying checksum(s) for surfraw ---> Extracting surfraw ---> Configuring surfraw ---> Building surfraw with target all ---> Staging surfraw into destroot ---> Installing surfraw 2.2.1_0 ---> Activating surfraw 2.2.1_0 ---> Cleaning surfraw }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 09:22:43 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 16:22:43 -0000 Subject: [MacPorts] #15286: unison 2.27.57 does not compile In-Reply-To: <053.881ed03adeb709e921d249a6de3c721f@macports.org> References: <053.881ed03adeb709e921d249a6de3c721f@macports.org> Message-ID: <062.ae88563499b6d90ce24ece09c9f711eb@macports.org> #15286: unison 2.27.57 does not compile --------------------------------+------------------------------------------- Reporter: gavin at gromper.net | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by gavin at gromper.net): Unison builds if I disable the x11 variant, but fails with it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 09:50:01 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 16:50:01 -0000 Subject: [MacPorts] #15520: upgrade processes the same dep multiple times if different depspecs are used Message-ID: <052.6cd48754bd308b3bfc97ea0b5b4c0fc0@macports.org> #15520: upgrade processes the same dep multiple times if different depspecs are used ------------------------------+--------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: MacPorts base bugs Component: ports | Version: 1.7.0 Keywords: | ------------------------------+--------------------------------------------- The depscache is meant to prevent the same port from being upgraded more than once. However, it stores full depspecs, so if one port depends on bin:perl:perl5.8 and another on port:perl5.8, perl5.8 will be upgraded twice. This is usually a non-issue, but it causes extra port rebuilds if -f is used. I suggest a two-part fix: 1. Always skip processing foo if port:foo is in the depscache, and 2. When processing a dep with a depspec other than port:, add a port: entry to the depscache if and only if the port actually ends up being installed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 12:22:22 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 19:22:22 -0000 Subject: [MacPorts] #15492: UPDATE: ldns, ldns-tools, drill 1.3.0 In-Reply-To: <064.473f3dc9b5c2f1005a5293d08b948bd4@macports.org> References: <064.473f3dc9b5c2f1005a5293d08b948bd4@macports.org> Message-ID: <073.c88f8b4b77b2fef69b9b8e59af52d5f8@macports.org> #15492: UPDATE: ldns, ldns-tools, drill 1.3.0 -------------------------------------------+-------------------------------- Reporter: marius.rieder at durchmesser.ch | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: -------------------------------------------+-------------------------------- Changes (by jann at macports.org): * status: new => closed * resolution: => fixed Comment: Commited in r37388. Thanks. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 12:42:51 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 19:42:51 -0000 Subject: [MacPorts] #15521: [pidgin] [2.3.1] compile error Message-ID: <054.d2f7af87540c285384880d21f44e7d4a@macports.org> #15521: [pidgin] [2.3.1] compile error --------------------------------+------------------------------------------- Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- I want to install pidgin. But: Can any help me? bash-3.2$ sudo port install pidgin ---> Building pidgin with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.3.1" && make all " returned error 2 Command output: make all-recursive Making all in libpurple make all-recursive Making all in gconf LC_ALL=C ../../intltool-merge -s -u -c ../../po/.intltool-merge-cache ../../po purple.schemas.in purple.schemas Possible unintended interpolation of @INTLTOOL_ICONV in string at ../../intltool-merge line 96. Global symbol "@INTLTOOL_ICONV" requires explicit package name at ../../intltool-merge line 96. BEGIN not safe after errors--compilation aborted at ../../intltool-merge line 263. make[4]: *** [purple.schemas] Error 255 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 14:22:21 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 21:22:21 -0000 Subject: [MacPorts] #15522: Octave installation fails Message-ID: <053.f7e9dae0b247b9e0d35725cc48ffd4b3@macports.org> #15522: Octave installation fails -------------------------------+-------------------------------------------- Reporter: andre at emt.inrs.ca | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- On Intel with 10.5.2, trying to install octave crashes with the message sudo port install octave Password: ---> Building octave with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_octave/work/octave-2.9.15" && make all " returned error 2 Command output: make -C tests all making PKG_ADD ls: *.cc: No such file or directory make -C strings all making PKG_ADD ls: *.cc: No such file or directory make -C testfun all make[3]: Nothing to be done for `all'. make -C time all making PKG_ADD ls: *.cc: No such file or directory make -C doc all make -C faq all make[3]: Nothing to be done for `all'. make -C interpreter all make -C ../../src DOCSTRINGS making defaults.h from defaults.h.in defaults.h is unchanged making oct-conf.h from oct-conf.h.in oct-conf.h is unchanged making DOCSTRINGS DOCSTRINGS is unchanged make -C ../../scripts DOCSTRINGS make[4]: `DOCSTRINGS' is up to date. making arith.texi from arith.txi /bin/sh: line 1: 22396 Segmentation fault ./munge-texi -d ../../src/DOCSTRINGS -d ../../scripts/DOCSTRINGS < arith.txi > arith.texi-t make[3]: *** [arith.texi] Error 139 make[2]: *** [interpreter] Error 2 make[1]: *** [doc] Error 2 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 14:26:18 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 21:26:18 -0000 Subject: [MacPorts] #15522: Octave installation fails In-Reply-To: <053.f7e9dae0b247b9e0d35725cc48ffd4b3@macports.org> References: <053.f7e9dae0b247b9e0d35725cc48ffd4b3@macports.org> Message-ID: <062.38764cdb5160cd403fc3b73a58021477@macports.org> #15522: Octave installation fails --------------------------------+------------------------------------------- Reporter: andre at emt.inrs.ca | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by alakazam at melix.net): It would seem that you are trying to compile {{{octave 2.9}}}. The latest version of {{{octave}}} provided by MacPorts is {{{octave3.0.1}}}. Please run {{{sudo port selfupdate}}} and try installing {{{octave}}}?again. This should fix your problem. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 14:46:49 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 21:46:49 -0000 Subject: [MacPorts] #15523: apr: 4-way universal build: duplicate case value Message-ID: <059.4bd6818d944c905df6cccf68bb8bbca9@macports.org> #15523: apr: 4-way universal build: duplicate case value -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: dluke at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- I'm trying to make a 4-way universal binary of apr. I have MacPorts trunk (@37237), Mac OS X 10.4.11, Xcode 2.4.1, MacBook Pro. I have `universal_archs` set to `ppc i386 ppc64 x86_64` in macports.conf. Here's what apr says: {{{ $ /mp/bin/port install apr build.jobs=1 ---> Fetching apr ---> Verifying checksum(s) for apr ---> Extracting apr ---> Configuring apr ---> Building apr with target all Error: Target org.macports.build returned: shell command " cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12" && nice -n 1 make all " returned error 2 Command output: /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o passwd/apr_getpass.lo -c passwd/apr_getpass.c && touch passwd/apr_getpass.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_cpystrn.lo -c strings/apr_cpystrn.c && touch strings/apr_cpystrn.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_strnatcmp.lo -c strings/apr_strnatcmp.c && touch strings/apr_strnatcmp.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_strings.lo -c strings/apr_strings.c && touch strings/apr_strings.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_strtok.lo -c strings/apr_strtok.c && touch strings/apr_strtok.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_fnmatch.lo -c strings/apr_fnmatch.c && touch strings/apr_fnmatch.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_snprintf.lo -c strings/apr_snprintf.c && touch strings/apr_snprintf.lo strings/apr_snprintf.c: In function 'conv_os_thread_t': strings/apr_snprintf.c:503: error: duplicate case value strings/apr_snprintf.c:501: error: previously used here strings/apr_snprintf.c: In function 'conv_os_thread_t_hex': strings/apr_snprintf.c:674: error: duplicate case value strings/apr_snprintf.c:672: error: previously used here strings/apr_snprintf.c: In function 'conv_os_thread_t': strings/apr_snprintf.c:503: error: duplicate case value strings/apr_snprintf.c:501: error: previously used here strings/apr_snprintf.c: In function 'conv_os_thread_t_hex': strings/apr_snprintf.c:674: error: duplicate case value strings/apr_snprintf.c:672: error: previously used here lipo: can't figure out the architecture type of: /var/tmp//ccxuzKTk.out make[1]: *** [strings/apr_snprintf.lo] Error 1 make: *** [all-recursive] Error 1 Error: Status 1 encountered during processing. $ }}} [https://issues.apache.org/bugzilla/show_bug.cgi?id=43528 APR bug 43528] is for the same error message but it was closed as invalid in October 2007. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 15:24:55 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 22:24:55 -0000 Subject: [MacPorts] #13982: tiff 3.8.2 and libpng 1.2.24 cannot find zlib In-Reply-To: <051.30af14e77a875dd64b7d57740fc32a20@macports.org> References: <051.30af14e77a875dd64b7d57740fc32a20@macports.org> Message-ID: <060.4f4a313ac2c3d5d196bef4e7acb3288b@macports.org> #13982: tiff 3.8.2 and libpng 1.2.24 cannot find zlib ------------------------------+--------------------------------------------- Reporter: dorfman at est.org | Owner: waqar at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: ImageMagick zlib ------------------------------+--------------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => worksforme Comment: I use 10.4 on my primary port development machine and can't reproduce this either. I'm going to close this. If anyone can reproduce this and believes a change needs to be made in MacPorts, please re-open. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 15:59:28 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 22:59:28 -0000 Subject: [MacPorts] #13028: BUG: sqlite3 fails to compile In-Reply-To: <058.492d4d690e17739a01e8bce1dff282e8@macports.org> References: <058.492d4d690e17739a01e8bce1dff282e8@macports.org> Message-ID: <067.4e04ab8475e4fc0b42dae8824430d230@macports.org> #13028: BUG: sqlite3 fails to compile -------------------------------------+-------------------------------------- Reporter: bahamat at digitalelf.net | Owner: mww at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.0 Resolution: | Keywords: sqlite3 -------------------------------------+-------------------------------------- Changes (by benoit.hudson at gmail.com): * status: closed => reopened * resolution: fixed => Comment: On a clean (arrived in the mail today) system (MB Air, system update today, installed xcode off the CD), I downloaded macports 1.6.0 and typed sudo port selfupdate Of course, nothing happened, so then I hit: sudo port install tetex subversion mercurial and got exactly this bug. However, after sudo port clean sqlite3 sudo port -d build sqlite3 > sqlite-bug 2>&1 it now works. I doubt sqlite-bug could possibly be useful to you, but if you want it, just say so. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 16:37:16 2008 From: noreply at macports.org (MacPorts) Date: Thu, 05 Jun 2008 23:37:16 -0000 Subject: [MacPorts] #15356: building jpeg fails In-Reply-To: <054.8045bfb51a9daf247528b55645137163@macports.org> References: <054.8045bfb51a9daf247528b55645137163@macports.org> Message-ID: <063.dc34ef0856f046f349af5a2cd11fabe5@macports.org> #15356: building jpeg fails ---------------------------------+------------------------------------------ Reporter: lord at crocodile.org | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: jpeg ---------------------------------+------------------------------------------ Changes (by ryandesign at macports.org): * cc: ryandesign at macports.org (added) Comment: What version of Mac OS X, Xcode and MacPorts are you running, and on what kind of Mac? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 18:16:26 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 01:16:26 -0000 Subject: [MacPorts] #15524: pallet-0.1.0 patch to fix absolute paths Message-ID: <052.51cbfc371f401fff1ee85e1591017ebb@macports.org> #15524: pallet-0.1.0 patch to fix absolute paths -----------------------------------+---------------------------------------- Reporter: adioso at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: pallet absolute paths | -----------------------------------+---------------------------------------- There are two lines in Pallet.xcodeproj/project.pbxproj that reference absolute paths. This patch should fix that. This patch was created against the svn repository. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 18:38:31 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 01:38:31 -0000 Subject: [MacPorts] #15525: pallet-0.1.0 patches to add support for Leopard Message-ID: <052.428a4a614b2cdfa9813b65c3466c9e61@macports.org> #15525: pallet-0.1.0 patches to add support for Leopard ------------------------------+--------------------------------------------- Reporter: adioso at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: pallet leopard | ------------------------------+--------------------------------------------- I ran into these errors when building Pallet on Leopard: "library not found for -lcrt1.10.5.o when trying to build against MacOSX10.4u.sdk" The version of MacPorts I'm running seems to have the workaround described here: http://trac.macports.org/changeset/33480 Since this is an xcode project maybe the workaround doesn't apply? Attached are 2 patches, one patch to change the project to use the 10.5 SDK and another for the Portfile to apply the first patch if the build host is Leopard. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 19:20:04 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 02:20:04 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.d5e4c76da78492019b31fa424487f792@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by macports at flyn.org): I received some feedback from upstream. We need to build cairo and pango to use the Quartz font backend instead of the freetype backend. Here is how I fixed this on my machine, which runs Mac OS X 10.4 and MacPorts 1.6:[[BR]] [[BR]] 1. Force this installation of cairo-quartz-font.pc. This file is created by cairo's configure script and should be placed in /opt/local/lib/pkgconfig/. The cairo port should be modified to install this file automatically for the no_x11 variant.[[BR]] [[BR]] 2. Edit the cairo Portfile. For variant no_x11: DELETE: --enable-freetype. ADD: --disable-freetype, --enable-quartz, --enable-quartz-font, --enable- quartz-image and --enable-png[[BR]] [[BR]] 3. Execute "sudo port install cairo +no_x11 pango +no_x11 gnumeric"[[BR]] [[BR]] Note that gnumeric's cell labels still have garbled fonts. I suspect that this is due to goffice linking against /opt/local/lib/libpangoft2-1.0.0.dylib. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:24:23 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:24:23 -0000 Subject: [MacPorts] #15526: error installing metasploit3 dependancies on Leopard 10.5.3 Message-ID: <055.1569bbbb58e38d45057841d81df7de00@macports.org> #15526: error installing metasploit3 dependancies on Leopard 10.5.3 -----------------------------------------+---------------------------------- Reporter: bobby.carbn at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: 10.5.3 metaslpoit3 rb-rails | -----------------------------------------+---------------------------------- I received the following errors with the rb-rails dependancy: Warning: the following items did not execute (for rb-rubygems): org.macports.activate org.macports.destroot org.macports.install Error: The following dependencies failed to build: rb-rails rb- actionmailer rb-actionpack rb-activesupport rb-rubygems rb- actionwebservice rb-activerecord rb-rake Error: Status 1 encountered during processing. When I attempted to just install the rb-rails port the output of the command is below: ---> Staging rb-rubygems into destroot . missing (directory not created: File exists) ./Applications missing (directory not created: File exists) ./Developer missing (directory not created: File exists) ./Library missing (directory not created: File exists) mkdir -p /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb-rubygems/work/destroot/opt/local/lib mkdir -p /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb-rubygems/work/destroot/opt/local/bin install -c -m 0644 rbconfig/datadir.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rbconfig/datadir.rb install -c -m 0644 rubygems/builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/builder.rb install -c -m 0644 rubygems/command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/command.rb install -c -m 0644 rubygems/command_manager.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/command_manager.rb install -c -m 0644 rubygems/commands/build_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/build_command.rb install -c -m 0644 rubygems/commands/cert_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/cert_command.rb install -c -m 0644 rubygems/commands/check_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/check_command.rb install -c -m 0644 rubygems/commands/cleanup_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/cleanup_command.rb install -c -m 0644 rubygems/commands/contents_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/contents_command.rb install -c -m 0644 rubygems/commands/dependency_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/dependency_command.rb install -c -m 0644 rubygems/commands/environment_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/environment_command.rb install -c -m 0644 rubygems/commands/fetch_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/fetch_command.rb install -c -m 0644 rubygems/commands/generate_index_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/generate_index_command.rb install -c -m 0644 rubygems/commands/help_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/help_command.rb install -c -m 0644 rubygems/commands/install_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/install_command.rb install -c -m 0644 rubygems/commands/list_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/list_command.rb install -c -m 0644 rubygems/commands/lock_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/lock_command.rb install -c -m 0644 rubygems/commands/mirror_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/mirror_command.rb install -c -m 0644 rubygems/commands/outdated_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/outdated_command.rb install -c -m 0644 rubygems/commands/pristine_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/pristine_command.rb install -c -m 0644 rubygems/commands/query_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/query_command.rb install -c -m 0644 rubygems/commands/rdoc_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/rdoc_command.rb install -c -m 0644 rubygems/commands/search_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/search_command.rb install -c -m 0644 rubygems/commands/server_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/server_command.rb install -c -m 0644 rubygems/commands/sources_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/sources_command.rb install -c -m 0644 rubygems/commands/specification_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/specification_command.rb install -c -m 0644 rubygems/commands/uninstall_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/uninstall_command.rb install -c -m 0644 rubygems/commands/unpack_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/unpack_command.rb install -c -m 0644 rubygems/commands/update_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/update_command.rb install -c -m 0644 rubygems/commands/which_command.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/commands/which_command.rb install -c -m 0644 rubygems/config_file.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/config_file.rb install -c -m 0644 rubygems/custom_require.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/custom_require.rb install -c -m 0644 rubygems/defaults.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/defaults.rb install -c -m 0644 rubygems/dependency.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/dependency.rb install -c -m 0644 rubygems/dependency_installer.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/dependency_installer.rb install -c -m 0644 rubygems/dependency_list.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/dependency_list.rb install -c -m 0644 rubygems/digest/digest_adapter.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/digest/digest_adapter.rb install -c -m 0644 rubygems/digest/md5.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/digest/md5.rb install -c -m 0644 rubygems/digest/sha1.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/digest/sha1.rb install -c -m 0644 rubygems/digest/sha2.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/digest/sha2.rb install -c -m 0644 rubygems/doc_manager.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/doc_manager.rb install -c -m 0644 rubygems/exceptions.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/exceptions.rb install -c -m 0644 rubygems/ext/builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/ext/builder.rb install -c -m 0644 rubygems/ext/configure_builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/ext/configure_builder.rb install -c -m 0644 rubygems/ext/ext_conf_builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/ext/ext_conf_builder.rb install -c -m 0644 rubygems/ext/rake_builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/ext/rake_builder.rb install -c -m 0644 rubygems/ext.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/ext.rb install -c -m 0644 rubygems/format.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/format.rb install -c -m 0644 rubygems/gem_openssl.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/gem_openssl.rb install -c -m 0644 rubygems/gem_path_searcher.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/gem_path_searcher.rb install -c -m 0644 rubygems/gem_runner.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/gem_runner.rb install -c -m 0644 rubygems/indexer/abstract_index_builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/indexer/abstract_index_builder.rb install -c -m 0644 rubygems/indexer/latest_index_builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/indexer/latest_index_builder.rb install -c -m 0644 rubygems/indexer/marshal_index_builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/indexer/marshal_index_builder.rb install -c -m 0644 rubygems/indexer/master_index_builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/indexer/master_index_builder.rb install -c -m 0644 rubygems/indexer/quick_index_builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/indexer/quick_index_builder.rb install -c -m 0644 rubygems/indexer.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/indexer.rb install -c -m 0644 rubygems/install_update_options.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/install_update_options.rb install -c -m 0644 rubygems/installer.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/installer.rb install -c -m 0644 rubygems/local_remote_options.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/local_remote_options.rb install -c -m 0644 rubygems/old_format.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/old_format.rb install -c -m 0644 rubygems/package/f_sync_dir.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/package/f_sync_dir.rb install -c -m 0644 rubygems/package/tar_header.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/package/tar_header.rb install -c -m 0644 rubygems/package/tar_input.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/package/tar_input.rb install -c -m 0644 rubygems/package/tar_output.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/package/tar_output.rb install -c -m 0644 rubygems/package/tar_reader/entry.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/package/tar_reader/entry.rb install -c -m 0644 rubygems/package/tar_reader.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/package/tar_reader.rb install -c -m 0644 rubygems/package/tar_writer.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/package/tar_writer.rb install -c -m 0644 rubygems/package.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/package.rb install -c -m 0644 rubygems/platform.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/platform.rb install -c -m 0644 rubygems/remote_fetcher.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/remote_fetcher.rb install -c -m 0644 rubygems/require_paths_builder.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/require_paths_builder.rb install -c -m 0644 rubygems/requirement.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/requirement.rb install -c -m 0644 rubygems/rubygems_version.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/rubygems_version.rb install -c -m 0644 rubygems/security.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/security.rb install -c -m 0644 rubygems/server.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/server.rb install -c -m 0644 rubygems/source_index.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/source_index.rb install -c -m 0644 rubygems/source_info_cache.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/source_info_cache.rb install -c -m 0644 rubygems/source_info_cache_entry.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/source_info_cache_entry.rb install -c -m 0644 rubygems/specification.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/specification.rb install -c -m 0644 rubygems/timer.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/timer.rb install -c -m 0644 rubygems/uninstaller.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/uninstaller.rb install -c -m 0644 rubygems/user_interaction.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/user_interaction.rb install -c -m 0644 rubygems/validator.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/validator.rb install -c -m 0644 rubygems/version.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/version.rb install -c -m 0644 rubygems/version_option.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/version_option.rb install -c -m 0644 rubygems.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems.rb install -c -m 0644 ubygems.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb-rubygems/work/destroot/opt/local/lib/ubygems.rb cp gem /tmp/gem install -c -m 0755 /tmp/gem /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb-rubygems/work/destroot/opt/local/bin/gem rm /tmp/gem ./lib/rubygems/custom_require.rb:27:in `gem_original_require': no such file to load -- socket (LoadError) from ./lib/rubygems/custom_require.rb:27:in `require' from /opt/local/lib/ruby/1.8/net/protocol.rb:21 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from /opt/local/lib/ruby/1.8/net/http.rb:28 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from ./lib/rubygems/remote_fetcher.rb:1 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from ./lib/rubygems/source_info_cache_entry.rb:3 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from ./lib/rubygems/source_info_cache.rb:4 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from setup.rb:206 Error: Target org.macports.destroot returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb-rubygems/work/rubygems-1.1.1" && /opt/local/bin/ruby setup.rb install --prefix=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb-rubygems/work/destroot/opt/local DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb-rubygems/work/destroot " returned error 1 Command output: install -c -m 0644 rubygems/specification.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/specification.rb install -c -m 0644 rubygems/timer.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/timer.rb install -c -m 0644 rubygems/uninstaller.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/uninstaller.rb install -c -m 0644 rubygems/user_interaction.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/user_interaction.rb install -c -m 0644 rubygems/validator.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/validator.rb install -c -m 0644 rubygems/version.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/version.rb install -c -m 0644 rubygems/version_option.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems/version_option.rb install -c -m 0644 rubygems.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb- rubygems/work/destroot/opt/local/lib/rubygems.rb install -c -m 0644 ubygems.rb /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb-rubygems/work/destroot/opt/local/lib/ubygems.rb cp gem /tmp/gem install -c -m 0755 /tmp/gem /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_ruby_rb-rubygems/work/destroot/opt/local/bin/gem rm /tmp/gem ./lib/rubygems/custom_require.rb:27:in `gem_original_require': no such file to load -- socket (LoadError) from ./lib/rubygems/custom_require.rb:27:in `require' from /opt/local/lib/ruby/1.8/net/protocol.rb:21 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from /opt/local/lib/ruby/1.8/net/http.rb:28 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from ./lib/rubygems/remote_fetcher.rb:1 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from ./lib/rubygems/source_info_cache_entry.rb:3 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from ./lib/rubygems/source_info_cache.rb:4 from ./lib/rubygems/custom_require.rb:27:in `gem_original_require' from ./lib/rubygems/custom_require.rb:27:in `require' from setup.rb:206 Warning: the following items did not execute (for rb-rubygems): org.macports.activate org.macports.destroot org.macports.install Error: The following dependencies failed to build: rb-actionmailer rb- actionpack rb-activesupport rb-rubygems rb-actionwebservice rb- activerecord rb-rake Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:29:03 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:29:03 -0000 Subject: [MacPorts] #15517: pango error install; No such file or directory In-Reply-To: <058.b07bc7aaaa63d922e42bf343f9806a34@macports.org> References: <058.b07bc7aaaa63d922e42bf343f9806a34@macports.org> Message-ID: <067.7bdcdd61f31fc9f84036240da89d8216@macports.org> #15517: pango error install; No such file or directory -------------------------------------+-------------------------------------- Reporter: esben_kaufmann at msn.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: pango -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) Comment: MacPorts thinks that pango has been extracted, but its work directory is not present. Maybe you deleted it somehow? Run `sudo port clean pango` and try again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:29:35 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:29:35 -0000 Subject: [MacPorts] #15518: snort-2.6.1.5 patches to add postgresql83 variant In-Reply-To: <052.bb9076925adb65d990b6b0740cd36813@macports.org> References: <052.bb9076925adb65d990b6b0740cd36813@macports.org> Message-ID: <061.edb291ac134548f10efffd0e42ee158e@macports.org> #15518: snort-2.6.1.5 patches to add postgresql83 variant -------------------------------+-------------------------------------------- Reporter: adioso at gmail.com | Owner: markd at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: snort 2.6.1.5 postgreql83 -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * cc: markd at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => markd at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:33:07 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:33:07 -0000 Subject: [MacPorts] #15521: [pidgin] [2.3.1] compile error In-Reply-To: <054.d2f7af87540c285384880d21f44e7d4a@macports.org> References: <054.d2f7af87540c285384880d21f44e7d4a@macports.org> Message-ID: <063.810e562292b8ccf24fb7413d6301d6e5@macports.org> #15521: [pidgin] [2.3.1] compile error ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: rsync at reifferscheid.org (added) Comment: Cc maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:34:17 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:34:17 -0000 Subject: [MacPorts] #15522: Octave installation fails In-Reply-To: <053.f7e9dae0b247b9e0d35725cc48ffd4b3@macports.org> References: <053.f7e9dae0b247b9e0d35725cc48ffd4b3@macports.org> Message-ID: <062.5fff24ab1b4871b8626a789be3b0608a@macports.org> #15522: Octave installation fails --------------------------------+------------------------------------------- Reporter: andre at emt.inrs.ca | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * cc: alakazam at melix.net (added) * owner: macports-tickets at lists.macosforge.org => stechert at macports.org * milestone: => Port Bugs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:40:55 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:40:55 -0000 Subject: [MacPorts] #15524: pallet-0.1.0 patch to fix absolute paths In-Reply-To: <052.51cbfc371f401fff1ee85e1591017ebb@macports.org> References: <052.51cbfc371f401fff1ee85e1591017ebb@macports.org> Message-ID: <061.426fadec52299f95ff67a33f5cbe6d94@macports.org> #15524: pallet-0.1.0 patch to fix absolute paths -------------------------------+-------------------------------------------- Reporter: adioso at gmail.com | Owner: rhwood at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: pallet absolute paths -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * cc: rhwood at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => rhwood at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:41:17 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:41:17 -0000 Subject: [MacPorts] #15525: pallet-0.1.0 patches to add support for Leopard In-Reply-To: <052.428a4a614b2cdfa9813b65c3466c9e61@macports.org> References: <052.428a4a614b2cdfa9813b65c3466c9e61@macports.org> Message-ID: <061.a1f78acc200af46cdda77ed7a1d6cb36@macports.org> #15525: pallet-0.1.0 patches to add support for Leopard -------------------------------+-------------------------------------------- Reporter: adioso at gmail.com | Owner: rhwood at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: pallet leopard -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * cc: rhwood at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => rhwood at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:45:32 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:45:32 -0000 Subject: [MacPorts] #15169: sqlite3 test failures In-Reply-To: <051.7dcd334433bbcbd8d171144ebce5ea1d@macports.org> References: <051.7dcd334433bbcbd8d171144ebce5ea1d@macports.org> Message-ID: <060.7e0918eb952c8b9bbe7c726bf5e0654e@macports.org> #15169: sqlite3 test failures ------------------------------+--------------------------------------------- Reporter: pfein at pobox.com | Owner: mww at macports.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------+--------------------------------------------- Changes (by jmr at macports.org): * cc: mww at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => mww at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:48:24 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:48:24 -0000 Subject: [MacPorts] #13028: BUG: sqlite3 fails to compile In-Reply-To: <058.492d4d690e17739a01e8bce1dff282e8@macports.org> References: <058.492d4d690e17739a01e8bce1dff282e8@macports.org> Message-ID: <067.a86f2c495f905194e21cd4a81f39a8e7@macports.org> #13028: BUG: sqlite3 fails to compile -------------------------------------+-------------------------------------- Reporter: bahamat at digitalelf.net | Owner: mww at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.0 Resolution: fixed | Keywords: sqlite3 -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * cc: bahamat at digitalelf.net, mww at macports.org (removed) * status: reopened => closed * resolution: => fixed Comment: This is a Leopard Tcl bug as noted in #14938. A workaround is implemented in MacPorts trunk, and with 1.6.0 you can work around it by cleaning and trying the install again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 21:52:06 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 04:52:06 -0000 Subject: [MacPorts] #15526: error installing rb-rubygems on Leopard 10.5.3 In-Reply-To: <055.1569bbbb58e38d45057841d81df7de00@macports.org> References: <055.1569bbbb58e38d45057841d81df7de00@macports.org> Message-ID: <064.a0b286ee4c5f17e7487631f575b2fece@macports.org> #15526: error installing rb-rubygems on Leopard 10.5.3 ----------------------------------+----------------------------------------- Reporter: bobby.carbn at mac.com | Owner: mr_bond at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: 10.5.3 metaslpoit3 rb-rails ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => mr_bond at macports.org * summary: error installing metasploit3 dependancies on Leopard 10.5.3 => error installing rb-rubygems on Leopard 10.5.3 Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 22:55:27 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 05:55:27 -0000 Subject: [MacPorts] #15527: New Port: qtpfsgui 1.9.2 Message-ID: <057.85958f3374993e7525f4b0a740d66dec@macports.org> #15527: New Port: qtpfsgui 1.9.2 -----------------------------------+---------------------------------------- Reporter: clubjuggler at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: hdr | -----------------------------------+---------------------------------------- From the qtpfsgui website http://qtpfsgui.sourceforge.net/ Qtpfsgui is an open source graphical user interface application that aims to provide a workflow for HDR imaging. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 22:58:30 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 05:58:30 -0000 Subject: [MacPorts] #15527: New Port: qtpfsgui 1.9.2 In-Reply-To: <057.85958f3374993e7525f4b0a740d66dec@macports.org> References: <057.85958f3374993e7525f4b0a740d66dec@macports.org> Message-ID: <066.c9fab6f6e74b7aaec2d1f4e81bc9fb0b@macports.org> #15527: New Port: qtpfsgui 1.9.2 ------------------------------------+--------------------------------------- Reporter: clubjuggler at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: hdr ------------------------------------+--------------------------------------- Comment (by clubjuggler at gmail.com): Note: I currently have this port listed as being in graphics. It could instead, be moved to the aqua category since it is an aqua application. But, it's also a graphics application. So, dealer's choice. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 23:26:58 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 06:26:58 -0000 Subject: [MacPorts] #13946: tiff-3.8.2 +universal doesn't produce working binaries on PPC machines In-Reply-To: <056.dc83bb5129dcc2167a5bf2eac9f1defd@macports.org> References: <056.dc83bb5129dcc2167a5bf2eac9f1defd@macports.org> Message-ID: <065.3e7f54da9c4036b04b452878e171662e@macports.org> #13946: tiff-3.8.2 +universal doesn't produce working binaries on PPC machines -----------------------------------+---------------------------------------- Reporter: dev at ultravelours.com | Owner: waqar at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: universal build failure -----------------------------------+---------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: No response from maintainer in > 72 hours so I committed a fix in r37397 based on the [http://www.dleo.de/howto/imagemagick_fuer_os_x_kompilieren German web page] linked above (redefine the constants after running `./configure`). I've verified that `tiffinfo` now works correctly when building a universal binary on Tiger PowerPC and Tiger Intel. "All 4 tests passed" for what that's worth. :) I don't know what to do about your "unknown field with tag 34858" errors. I don't get that on my TIFF images, on either PowerPC or Intel. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 23:46:53 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 06:46:53 -0000 Subject: [MacPorts] #15528: ruby @1.8.6-p114 patch to get Ruby's Socket classes to work with getaddrinfo under 10.5.3 Message-ID: <068.5c7bc2e8e5b7f32c6551678d21337474@macports.org> #15528: ruby @1.8.6-p114 patch to get Ruby's Socket classes to work with getaddrinfo under 10.5.3 ---------------------------------------------------+------------------------ Reporter: aguynamedryan+macports at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: ruby getaddrinfo 10.5.3 drb TCPServer | ---------------------------------------------------+------------------------ Kurt Schrader posted in [http://www.ruby-forum.com/topic/154556 this thread], that after upgrading to Mac OS X 10.5.3 some calls to DRb fail with: {{{ /opt/local/lib/ruby/1.8/drb/drb.rb:865:in `initialize': getaddrinfo: nodename nor servname provided, or not known (SocketError) from /opt/local/lib/ruby/1.8/drb/drb.rb:865:in `open' from /opt/local/lib/ruby/1.8/drb/drb.rb:865:in `open_server' }}} It appears that Ruby's calls to {{{getaddrinfo}}} which pass {{{"0"}}} for the servname argument are now returning EAI_NONAME instead of 0, which causes ruby to raise a SocketError Andy Keep discovered that feeding {{{nil}}} in place of of {{{"0"}}} for the service number works: {{{ irb(main):001:0> require 'socket' => true irb(main):011:0> Socket.getaddrinfo(Socket.gethostname, 0, Socket::AF_INET, Socket::SOCK_STREAM, nil, Socket::AI_CANONNAME) SocketError: getaddrinfo: nodename nor servname provided, or not known from (irb):11:in `getaddrinfo' from (irb):11 from :0 irb(main):012:0> Socket.getaddrinfo(Socket.gethostname, nil, Socket::AF_INET, Socket::SOCK_STREAM, nil, Socket::AI_CANONNAME) => [["AF_INET", 0, "192.168.1.95", "192.168.1.95", 2, 1, 6]] }}} I have discovered that {{{TCPServer.open('localhost', 0)}}} also fails under 10.5.3 both in MacPorts and in the Ruby installation that ships with Mac OS X Leopard. I have very little socket programming experience, but I have made a patch that changes Socket's servname argument of "0" and replaces it with NULL before it is passed to getaddrinfo. I have no idea what unintended effects this might cause, but it seems to have cleared up my problems with DRb and TCPServer for the time being. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 23:53:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 06:53:43 -0000 Subject: [MacPorts] #15490: New port p5-iterator In-Reply-To: <053.e7221f7148bbd9124eb215957ab33db0@macports.org> References: <053.e7221f7148bbd9124eb215957ab33db0@macports.org> Message-ID: <062.1e43f06628f5b5552873d3dde465a78f@macports.org> #15490: New port p5-iterator --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: Iterator --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * cc: raimue at macports.org (added) * milestone: Port Enhancements => Port Submissions -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 5 23:53:58 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 06:53:58 -0000 Subject: [MacPorts] #15497: new port p5-iterator-util of Iterator::Util Perl file In-Reply-To: <053.d6312eeabc0eaeb77c580d52a4d3b557@macports.org> References: <053.d6312eeabc0eaeb77c580d52a4d3b557@macports.org> Message-ID: <062.43096895d22c00d483444a79c5ed28b4@macports.org> #15497: new port p5-iterator-util of Iterator::Util Perl file --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: iterator, perl --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * cc: raimue at macports.org (added) * milestone: Port Enhancements => Port Submissions -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 00:45:32 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 07:45:32 -0000 Subject: [MacPorts] #15529: php5: add dbase support Message-ID: <059.8b0ecd78d2369d086dc84a66c3afdc2c@macports.org> #15529: php5: add dbase support -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: ryandesign at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- I received a request by email from Mikel King on 2008-01-29 to add support for dbase databases, and another from Gregg Green on 2008-06-06. This should be as simple as adding `--enable-dbase` to the `configure.args`. No additional dependencies are needed, but warnings on the [http://www.php.net/manual/en/intro.dbase.php php web site] make me want to put dbase support in a variant anyway. The warning reads: >There is no support for indexes or memo fields. There is no support for locking, too. Two concurrent web server processes modifying the same dBase file will very likely ruin your database. >We recommend that you do not use dBase files as your production database. Choose any real SQL server instead; MySQL or Postgres are common choices with PHP. dBase support is here to allow you to import and export data to and from your web database, because the file format is commonly understood by Windows spreadsheets and organizers. A new dbase variant should be added to the php5 (and php5-devel (and php4?)) port, and it should print a warning like the above when it is selected. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 01:21:16 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 08:21:16 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.416c77e8f9b2a28424951bc23e909160@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: milosh at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by milosh at macports.org): I am against this change. rubber works very well with python24 or apple's python (be it in tiger or in leopard) and as rubber installs outside of python's path I don't see the point of requiring a particular version. Making it depend on python_select would be a good idea however. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 02:04:26 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 09:04:26 -0000 Subject: [MacPorts] #15530: port build: assembled command missing parallel build argument Message-ID: <059.860ca152e05efbf811b063345b221dde@macports.org> #15530: port build: assembled command missing parallel build argument -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: afb at macports.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- I have `buildmakejobs` set to `2` and `buildnicevalue` set to `1` in my `macports.conf`. I'm using MacPorts trunk (@37400), Xcode 2.4.1, Mac OS X 10.4.11, MacBook Pro. When I build e.g. apr with debug output I see this: {{{ ---> Building apr with target all DEBUG: Executing org.macports.build (apr) DEBUG: port allows a parallel build DEBUG: Environment: "MACOSX_DEPLOYMENT_TARGET"='10.4' DEBUG: Assembled command: 'cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12" && nice -n 1 make all' }}} The problem is it doesn't show the `-j2` argument to the make command, but the port does allow parallel building, and I can tell from my CPU monitor that the port is building in parallel. So it seems the command it says it assembled isn't the command it's actually running. In r36907 it was working properly: {{{ DEBUG: Assembled command: 'cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12" && nice -n 1 make -j2 all' [snip proper build output] }}} In r36913 and r36914 port no longer builds, and `-j2` has disappeared from the advertised assembled command: {{{ DEBUG: Assembled command: 'cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12" && make all' make: *** No rule to make target `all'. Stop. Error: Target org.macports.build returned: shell command "nice -n 1 cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12" && make all -j2" returned error 2 }}} In r36915 it builds but `-j2` is still absent from the command shown: {{{ DEBUG: Assembled command: 'cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12" && nice -n 1 make all' [snip proper build output] }}} We should fix this, but I'm also curious why the command we're running isn't the command we're printing. Why don't the two come from the same variable? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 02:37:33 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 09:37:33 -0000 Subject: [MacPorts] #15530: port build: assembled command's debug output missing parallel build argument In-Reply-To: <059.860ca152e05efbf811b063345b221dde@macports.org> References: <059.860ca152e05efbf811b063345b221dde@macports.org> Message-ID: <068.fd44819e1051c4fa0c98e50d024b60c1@macports.org> #15530: port build: assembled command's debug output missing parallel build argument --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: afb at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by afb at macports.org): * status: new => assigned * summary: port build: assembled command missing parallel build argument => port build: assembled command's debug output missing parallel build argument Comment: Yes, this is a known shortcoming. The debug output of `command_exec` only shows the command, and not the command_prefix or command_suffix arguments - that the current parallel build workaround uses. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 02:44:26 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 09:44:26 -0000 Subject: [MacPorts] #15530: port build: assembled command's debug output missing parallel build argument In-Reply-To: <059.860ca152e05efbf811b063345b221dde@macports.org> References: <059.860ca152e05efbf811b063345b221dde@macports.org> Message-ID: <068.7403a1a13552330ace6786c4021c33c5@macports.org> #15530: port build: assembled command's debug output missing parallel build argument --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: afb at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by afb at macports.org): r36907/r31807 of src/port1.0/portbuild.tcl didn't work due to #15295 (destroot.cmd inheriting build.cmd) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 03:32:36 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 10:32:36 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.051e3772d2123ddc85ac88fa2e0c9d70@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by ryandesign at macports.org): Replying to [comment:13 macports at flyn.org]: > I received some feedback from upstream. We need to build cairo and pango to use the Quartz font backend instead of the freetype backend. Why "instead of"? The fontconfig and ATSUI backends used to be mutually exclusive, but since cairo 1.4.x (I think) it's been possible to install them simultaneously, and since 1.6.x where the ATSUI backend is now called the Quartz font backend, they're even both enabled simultaneously by default. > Here is how I fixed this on my machine, which runs Mac OS X 10.4 and MacPorts 1.6:[[BR]] > [[BR]] > 1. Force this installation of cairo-quartz-font.pc. This file is created by cairo's configure script and should be placed in /opt/local/lib/pkgconfig/. The cairo port should be modified to install this file automatically for the no_x11 variant.[[BR]] This is #15209. > 2. Edit the cairo Portfile. For variant no_x11: DELETE: --enable- freetype. ADD: --disable-freetype, --enable-quartz, --enable-quartz-font, --enable-quartz-image and --enable-png[[BR]] The global `configure.args` for this port already contain everything you list, except that they contain `--enable-freetype`, not `--disable- freetype`, because I want the freetype backend enabled, just like I want the Quartz backend enabled. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 03:37:24 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 10:37:24 -0000 Subject: [MacPorts] #15209: cairo+quartz broken: cairo-quartz-font pkgconfig pc file is not installed In-Reply-To: <063.e4572145e657a09e2aa70511eaeddebc@macports.org> References: <063.e4572145e657a09e2aa70511eaeddebc@macports.org> Message-ID: <072.ef8703131f106e4c606225334de9176b@macports.org> #15209: cairo+quartz broken: cairo-quartz-font pkgconfig pc file is not installed ------------------------------------------+--------------------------------- Reporter: shreevatsa.public at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------------+--------------------------------- Comment (by ryandesign at macports.org): Replying to [comment:6 nox at macports.org]: > By the way, cairo's platform should be macosx, not darwin, it depends on Quartz. Instead of changing the port's platform from darwin to macosx, I'd rather add a `platform macosx` section and move the Quartz bits into that. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 04:05:37 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 11:05:37 -0000 Subject: [MacPorts] #15528: ruby @1.8.6-p114 patch to get Ruby's Socket classes to work with getaddrinfo under 10.5.3 In-Reply-To: <068.5c7bc2e8e5b7f32c6551678d21337474@macports.org> References: <068.5c7bc2e8e5b7f32c6551678d21337474@macports.org> Message-ID: <077.3d24c7de36efde846392e4bbb2a3c7aa@macports.org> #15528: ruby @1.8.6-p114 patch to get Ruby's Socket classes to work with getaddrinfo under 10.5.3 -----------------------------------------------+---------------------------- Reporter: aguynamedryan+macports at gmail.com | Owner: pguyot at kallisys.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ruby getaddrinfo 10.5.3 drb TCPServer -----------------------------------------------+---------------------------- Changes (by jmr at macports.org): * cc: aguynamedryan+macports at gmail.com (removed) * owner: macports-tickets at lists.macosforge.org => pguyot at kallisys.net Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 05:37:50 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 12:37:50 -0000 Subject: [MacPorts] #15490: New port p5-iterator In-Reply-To: <053.e7221f7148bbd9124eb215957ab33db0@macports.org> References: <053.e7221f7148bbd9124eb215957ab33db0@macports.org> Message-ID: <062.e68c549af79ff4b04294258965d0a5cb@macports.org> #15490: New port p5-iterator --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Iterator --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => fixed Comment: Thanks for your submission. Committed in r37403. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 05:37:56 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 12:37:56 -0000 Subject: [MacPorts] #15497: new port p5-iterator-util of Iterator::Util Perl file In-Reply-To: <053.d6312eeabc0eaeb77c580d52a4d3b557@macports.org> References: <053.d6312eeabc0eaeb77c580d52a4d3b557@macports.org> Message-ID: <062.fb3555dba490f3268bfa7bc8dd27fc7d@macports.org> #15497: new port p5-iterator-util of Iterator::Util Perl file --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: iterator, perl --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => fixed Comment: Thanks for your submission. Committed in r37404. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 05:41:20 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 12:41:20 -0000 Subject: [MacPorts] #15284: macfuse 1.5 build failure In-Reply-To: <052.4ad9658d6b3bb89617b438a1c3699888@macports.org> References: <052.4ad9658d6b3bb89617b438a1c3699888@macports.org> Message-ID: <061.f40c0590f66ea7210f755b0a6e465c2e@macports.org> #15284: macfuse 1.5 build failure -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by jmr at macports.org): The MacFUSE issue was closed since it's Apple's bug and they don't want to work around it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 06:02:33 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 13:02:33 -0000 Subject: [MacPorts] #15531: port request of subdownloader app -http://code.google.com/p/subdownloader/ Message-ID: <054.03316ae95fc94903132555c58f3360e4@macports.org> #15531: port request of subdownloader app -http://code.google.com/p/subdownloader/ --------------------------------+------------------------------------------- Reporter: fuz2y.pt at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: High | Milestone: Component: ports | Version: 1.6.0 Keywords: subdownloader | --------------------------------+------------------------------------------- This is a nice app for linux to download subtitles for movies It was cool if someone ported it please :) http://code.google.com/p/subdownloader/ -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 06:05:14 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 13:05:14 -0000 Subject: [MacPorts] #15531: port request of subdownloader app In-Reply-To: <054.03316ae95fc94903132555c58f3360e4@macports.org> References: <054.03316ae95fc94903132555c58f3360e4@macports.org> Message-ID: <063.a3eb89cce80197b244cdf0bc89718d40@macports.org> #15531: port request of subdownloader app ---------------------------------+------------------------------------------ Reporter: fuz2y.pt at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: Resolution: | Keywords: subdownloader ---------------------------------+------------------------------------------ Changes (by raimue at macports.org): * priority: High => Normal * summary: port request of subdownloader app -http://code.google.com/p/subdownloader/ => port request of subdownloader app * version: 1.6.0 => * milestone: => Port Requests -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 06:19:17 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 13:19:17 -0000 Subject: [MacPorts] #15532: NEW: unittest++-1.3 Message-ID: <062.2634b0cf6bbf728da067365378bc4a06@macports.org> #15532: NEW: unittest++-1.3 ----------------------------------------+----------------------------------- Reporter: guidolorenz at uni-koblenz.de | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: UnitTest++ unittest-cpp | ----------------------------------------+----------------------------------- UnitTest++ is a lightweight unit testing framework for C++ (see http ://unittest-cpp.sourceforge.net/). The original Makefile does not have an install target. The port will install headers to ${prefix}/include/unittest++ (as the Ubuntu packages of UnitTest++ do) and the library to ${prefix}/lib. For now, the port lacks a universal variant, since I'm relatively new to Mac development. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 06:23:49 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 13:23:49 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.6558e50318772ee01a810b8d1f75a3ff@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Changes (by ram at macports.org): * owner: milosh at macports.org => ram at macports.org * status: new => assigned Comment: maintainer timeout -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 06:25:21 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 13:25:21 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.5fc9c1dcbe4e58c6efde87a4fd96b835@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: ram at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: -------------------------------+-------------------------------------------- Changes (by ram at macports.org): * status: assigned => closed * resolution: => fixed Comment: commited in r37407 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 06:28:40 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 13:28:40 -0000 Subject: [MacPorts] #14240: py-scipy fails to build on intel mac, xcode 2.5, tiger In-Reply-To: <055.05c7cab093e1e5baeb7501517cf41f4b@macports.org> References: <055.05c7cab093e1e5baeb7501517cf41f4b@macports.org> Message-ID: <064.82fbca27b1db8444d3b53f77b79dc58f@macports.org> #14240: py-scipy fails to build on intel mac, xcode 2.5, tiger ----------------------------------+----------------------------------------- Reporter: dave.iltis at utah.edu | Owner: ram at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ----------------------------------+----------------------------------------- Changes (by ram at macports.org): * status: assigned => closed * resolution: => fixed Comment: r37408 removed the various fortran variants from the py-numpy and py25-numpy ports, as these were just unnecessary dependencies. r37409 removed the default g95 variant and made gcc43 the default, these should resolve the build issue seen on Tiger due to g95 not being a supported (by numpy distutils) fortran compiler on Mac OS X. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 06:36:06 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 13:36:06 -0000 Subject: [MacPorts] #15527: New Port: qtpfsgui 1.9.2 In-Reply-To: <057.85958f3374993e7525f4b0a740d66dec@macports.org> References: <057.85958f3374993e7525f4b0a740d66dec@macports.org> Message-ID: <066.ee32f340aadd2b225557f82ece90c835@macports.org> #15527: New Port: qtpfsgui 1.9.2 ------------------------------------+--------------------------------------- Reporter: clubjuggler at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: hdr ------------------------------------+--------------------------------------- Comment (by clubjuggler at gmail.com): Reflecting overnight, I decided that this, being an aqua application, really goes in the aqua category so I reuploaded the portfile with the category changed from graphics to aqua. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 07:07:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 14:07:43 -0000 Subject: [MacPorts] #15533: ImageMagick 6.4.1-5: checksums fail on upgrade Message-ID: <054.a193c20637474026ccf49d6221ca7495@macports.org> #15533: ImageMagick 6.4.1-5: checksums fail on upgrade --------------------------------+------------------------------------------- Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: Image Magick | --------------------------------+------------------------------------------- Checksums fail on upgrade. {{{ ---> Attempting to fetch ImageMagick-6.4.1-5.tar.bz2 from http://internap.dl.sourceforge.net/imagemagick % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 8634k 100 8634k 0 0 952k 0 0:00:09 0:00:09 --:--:-- 1059k ---> Verifying checksum(s) for ImageMagick DEBUG: Executing org.macports.checksum (ImageMagick) ---> Checksumming ImageMagick-6.4.1-5.tar.bz2 Error: Checksum (md5) mismatch for ImageMagick-6.4.1-5.tar.bz2 Portfile checksum: ImageMagick-6.4.1-5.tar.bz2 md5 d2c82178143ddf7ee685158fd6d8cd52 Distfile checksum: ImageMagick-6.4.1-5.tar.bz2 md5 5e759449c2a644b07550aba1d35f0e08 Error: Checksum (sha1) mismatch for ImageMagick-6.4.1-5.tar.bz2 Portfile checksum: ImageMagick-6.4.1-5.tar.bz2 sha1 c69d2c34619da66c49d32ba1428634eb5867f488 Distfile checksum: ImageMagick-6.4.1-5.tar.bz2 sha1 c90aa4421650744867135dec4807c87fbe4ddcb8 Error: Checksum (rmd160) mismatch for ImageMagick-6.4.1-5.tar.bz2 Portfile checksum: ImageMagick-6.4.1-5.tar.bz2 rmd160 4b2c0aa43b3dc84ce0f0251b97abdbc42ae8684e Distfile checksum: ImageMagick-6.4.1-5.tar.bz2 rmd160 4f32c66291fac7c3a7427d17f9c2577acc772cf9 The correct checksum line may be: checksums md5 5e759449c2a644b07550aba1d35f0e08 \ sha1 c90aa4421650744867135dec4807c87fbe4ddcb8 \ rmd160 4f32c66291fac7c3a7427d17f9c2577acc772cf9 Error: Target org.macports.checksum returned: Unable to verify file checksums }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 07:12:55 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 14:12:55 -0000 Subject: [MacPorts] #15534: New port: p5-mail-sender Message-ID: <053.da4cf61f347c542d661059c108a9a259@macports.org> #15534: New port: p5-mail-sender --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: mail, sender, perl | --------------------------------+------------------------------------------- Port of Perl Mail::Sender -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 07:14:22 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 14:14:22 -0000 Subject: [MacPorts] #15535: New port p5-net-id Message-ID: <053.a3b8532c51843d503590d65da31c99c0@macports.org> #15535: New port p5-net-id -------------------------------+-------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- Port of Perl module Net::Id -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 07:15:38 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 14:15:38 -0000 Subject: [MacPorts] #15536: New Port p5-string-shellquote Message-ID: <053.b47a9a2ac3a28f1161d37f825780c439@macports.org> #15536: New Port p5-string-shellquote --------------------------------------+------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: perl, string, shellquote | --------------------------------------+------------------------------------- Port of Perl module String::ShellQuote -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 07:17:37 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 14:17:37 -0000 Subject: [MacPorts] #15537: New port p5-xml-parser-easytree Message-ID: <053.9a7ad85c253dc566994a8cc49fa4fcb4@macports.org> #15537: New port p5-xml-parser-easytree -------------------------------+-------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- Port of perl module XML::Parser::EasyTree -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 07:26:41 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 14:26:41 -0000 Subject: [MacPorts] #15498: Port of Perl Module Mail::Sender In-Reply-To: <053.9f9465973f539e3168ade795df63bd34@macports.org> References: <053.9f9465973f539e3168ade795df63bd34@macports.org> Message-ID: <062.53e38b98cbbd89c75ed96af4c60f1ae5@macports.org> #15498: Port of Perl Module Mail::Sender --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Mail, sender --------------------------------+------------------------------------------- Comment (by hagedorn at tcnj.edu): Should be deleted as this port was resubmitted under "Port Submission" -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 07:27:23 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 14:27:23 -0000 Subject: [MacPorts] #15499: New port of Perl Module Net::IP In-Reply-To: <053.669f0b8e9bb91bf54bcf6fd91b3af4c8@macports.org> References: <053.669f0b8e9bb91bf54bcf6fd91b3af4c8@macports.org> Message-ID: <062.aee804629e9e14cec2356b71f69a9912@macports.org> #15499: New port of Perl Module Net::IP --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: net, ip --------------------------------+------------------------------------------- Comment (by hagedorn at tcnj.edu): Should be deleted as this port was resubmitted under "Port Submission" -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 07:27:53 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 14:27:53 -0000 Subject: [MacPorts] #15500: New port of Perl module String::ShellQuote In-Reply-To: <053.5bb4e354c982eadd085f65831e80356e@macports.org> References: <053.5bb4e354c982eadd085f65831e80356e@macports.org> Message-ID: <062.fa9495b32b077721fa696759868f423f@macports.org> #15500: New port of Perl module String::ShellQuote --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: string, shellquote --------------------------------+------------------------------------------- Comment (by hagedorn at tcnj.edu): Should be deleted as this port was resubmitted under "Port Submission" -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 07:28:23 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 14:28:23 -0000 Subject: [MacPorts] #15501: New port of Perl Module XML::Parser::EasyTree In-Reply-To: <053.4ef9457a098b4598231aa1151bd616d0@macports.org> References: <053.4ef9457a098b4598231aa1151bd616d0@macports.org> Message-ID: <062.78217b76e495b4ceade6ae198b44b6b0@macports.org> #15501: New port of Perl Module XML::Parser::EasyTree --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: xml, parser, easytree --------------------------------+------------------------------------------- Comment (by hagedorn at tcnj.edu): Should be deleted as this port was resubmitted under "Port Submission" -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 08:51:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 15:51:43 -0000 Subject: [MacPorts] #15538: xsp fetch fails In-Reply-To: <052.0c76e6f4d4d29cf266ae588febe6df35@macports.org> References: <052.0c76e6f4d4d29cf266ae588febe6df35@macports.org> Message-ID: <061.999c2637922e86c9a15c7b368bf006af@macports.org> #15538: xsp fetch fails -------------------------------+-------------------------------------------- Reporter: tjarrett at jhu.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by tjarrett at jhu.edu): Sorry, it should fetch from:[[BR]] http://www.go-mono.com/sources/xsp/xsp-1.1.16.1.tar.gz I have a typo above. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 09:09:33 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 16:09:33 -0000 Subject: [MacPorts] #15539: Running into "Error: Status 1" whilst trying to install rtorrent Message-ID: <054.6fbfdd32fda03ae6dd56a0c6deb8f79b@macports.org> #15539: Running into "Error: Status 1" whilst trying to install rtorrent --------------------------------+------------------------------------------- Reporter: quimbley at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- I'm trying to install rtorrent on my mac (400 MHz PowerPC G3 iMac running a clean install OS X 10.4). I've installed the appropriate Xcode Tools version, and Macports. I seem to be having a problem with the libtorrent installation. This is the log containing the error I'm getting: ------------------------------------------ ---> Fetching libtorrent ---> Attempting to fetch libtorrent-0.11.9.tar.gz from http://libtorrent.rakshasa.no/downloads/ ---> Verifying checksum(s) for libtorrent ---> Extracting libtorrent ---> Configuring libtorrent ---> Building libtorrent with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_libtorrent/work/libtorrent-0.11.9" && make all " returned error 2 Command output: /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT resume.lo -MD -MP -MF .deps/resume.Tpo -c resume.cc -fno-common -DPIC -o .libs/resume.o if /bin/sh ../../libtool --tag=CXX --mode=compile /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT torrent.lo -MD -MP -MF ".deps/torrent.Tpo" -c -o torrent.lo torrent.cc; \ then mv -f ".deps/torrent.Tpo" ".deps/torrent.Plo"; else rm -f ".deps/torrent.Tpo"; exit 1; fi /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT torrent.lo -MD -MP -MF .deps/torrent.Tpo -c torrent.cc -fno-common -DPIC -o .libs/torrent.o if /bin/sh ../../libtool --tag=CXX --mode=compile /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT tracker.lo -MD -MP -MF ".deps/tracker.Tpo" -c -o tracker.lo tracker.cc; \ then mv -f ".deps/tracker.Tpo" ".deps/tracker.Plo"; else rm -f ".deps/tracker.Tpo"; exit 1; fi /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT tracker.lo -MD -MP -MF .deps/tracker.Tpo -c tracker.cc -fno-common -DPIC -o .libs/tracker.o if /bin/sh ../../libtool --tag=CXX --mode=compile /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT tracker_list.lo -MD -MP -MF ".deps/tracker_list.Tpo" -c -o tracker_list.lo tracker_list.cc; \ then mv -f ".deps/tracker_list.Tpo" ".deps/tracker_list.Plo"; else rm -f ".deps/tracker_list.Tpo"; exit 1; fi /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT tracker_list.lo -MD -MP -MF .deps/tracker_list.Tpo -c tracker_list.cc -fno-common -DPIC -o .libs/tracker_list.o /bin/sh ../../libtool --tag=CXX --mode=link /usr/bin/g++-4.0 -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -L/opt/local/lib -o libsub_torrent.la bitfield.lo chunk_manager.lo connection_manager.lo download.lo error.lo exceptions.lo http.lo object.lo object_stream.lo path.lo poll_epoll.lo poll_kqueue.lo poll_select.lo rate.lo resume.lo torrent.lo tracker.lo tracker_list.lo -lcrypto -L/opt/local/lib -L/opt/local/lib -lsigc-2.0 ar cru .libs/libsub_torrent.a .libs/bitfield.o .libs/chunk_manager.o .libs/connection_manager.o .libs/download.o .libs/error.o .libs/exceptions.o .libs/http.o .libs/object.o .libs/object_stream.o .libs/path.o .libs/poll_epoll.o .libs/poll_kqueue.o .libs/poll_select.o .libs/rate.o .libs/resume.o .libs/torrent.o .libs/tracker.o .libs/tracker_list.o ranlib .libs/libsub_torrent.a creating libsub_torrent.la (cd .libs && rm -f libsub_torrent.la && ln -s ../libsub_torrent.la libsub_torrent.la) Making all in data if /bin/sh ../../libtool --tag=CXX --mode=compile /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT chunk.lo -MD -MP -MF ".deps/chunk.Tpo" -c -o chunk.lo chunk.cc; \ then mv -f ".deps/chunk.Tpo" ".deps/chunk.Plo"; else rm -f ".deps/chunk.Tpo"; exit 1; fi mkdir .libs /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT chunk.lo -MD -MP -MF .deps/chunk.Tpo -c chunk.cc -fno-common -DPIC -o .libs/chunk.o if /bin/sh ../../libtool --tag=CXX --mode=compile /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT chunk_list.lo -MD -MP -MF ".deps/chunk_list.Tpo" -c -o chunk_list.lo chunk_list.cc; \ then mv -f ".deps/chunk_list.Tpo" ".deps/chunk_list.Plo"; else rm -f ".deps/chunk_list.Tpo"; exit 1; fi /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I./.. -I../.. -I/opt/local/include -O2 -DNDEBUG -fvisibility=hidden -I/opt/local/include -I/opt/local/include/sigc++-2.0 -I/opt/local/lib/sigc++-2.0/include -MT chunk_list.lo -MD -MP -MF .deps/chunk_list.Tpo -c chunk_list.cc -fno- common -DPIC -o .libs/chunk_list.o ../../rak/functional.h: In member function `Ret rak::mem_fun1::operator()(Arg1) [with Object = torrent::DownloadWrapper, Ret = void, Arg1 = const std::string&]': chunk_list.cc:295: instantiated from here ../../rak/functional.h:524: error: return-statement with a value, in function returning 'void' make[3]: *** [chunk_list.lo] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: The following dependencies failed to build: libtorrent ncurses ncursesw Error: Status 1 encountered during processing. ------------------------------------------ Any help would be greatly appreciated. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 09:18:07 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 16:18:07 -0000 Subject: [MacPorts] #15533: ImageMagick 6.4.1-5: checksums fail on upgrade In-Reply-To: <054.a193c20637474026ccf49d6221ca7495@macports.org> References: <054.a193c20637474026ccf49d6221ca7495@macports.org> Message-ID: <063.7aece9a439cb7a7d87dcae9563447be2@macports.org> #15533: ImageMagick 6.4.1-5: checksums fail on upgrade ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Image Magick ---------------------------------+------------------------------------------ Changes (by raimue at macports.org): * cc: ryandesign at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => ryandesign at macports.org Comment: ImageMagick and stealth upgrades - a never ending story? ;-) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 09:25:13 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 16:25:13 -0000 Subject: [MacPorts] #15529: php5: add dbase support In-Reply-To: <059.8b0ecd78d2369d086dc84a66c3afdc2c@macports.org> References: <059.8b0ecd78d2369d086dc84a66c3afdc2c@macports.org> Message-ID: <068.5cf89f844bdead0a2642d7994dc12370@macports.org> #15529: php5: add dbase support --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: ryandesign at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by raimue at macports.org): Do you really think we need to add a warning? Users should always consult the relevant documentation for the software they install through MacPorts IMHO. Not that such a warning would harm, just a comment. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 08:43:10 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 15:43:10 -0000 Subject: [MacPorts] #15538: xsp fetch fails Message-ID: <052.0c76e6f4d4d29cf266ae588febe6df35@macports.org> #15538: xsp fetch fails ------------------------------+--------------------------------------------- Reporter: tjarrett at jhu.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------+--------------------------------------------- When trying to install xsp, fetching of the tarball fails because the url is a bit corrupted. It attempts to fetch from:[[BR]] http://www.go-mono.com//sources/xsp/xsp-1.1.16.1.tar.gz It should fetch from:[[BR]] http://www.go-mono.com//sources/xsp/xsp-1.1.16.1.tar.gz In the meantime, I worked around it by fixing the url in the Portfile at:[[BR]] /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/xsp/Portfile Here is my output: {{{ dev:~ tjarrett$ sudo port install xsp ---> Fetching xsp ---> Attempting to fetch xsp-1.1.16.1.tar.gz from http://www.go- mono.com//sources/xsp/ ---> Attempting to fetch xsp-1.1.16.1.tar.gz from http://svn.macports.org/repository/macports/distfiles/xsp ---> Attempting to fetch xsp-1.1.16.1.tar.gz from http://svn.macports.org/repository/macports/distfiles/general/ ---> Attempting to fetch xsp-1.1.16.1.tar.gz from http://svn.macports.org/repository/macports/downloads/xsp Error: Target org.macports.fetch returned: fetch failed Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 10:52:33 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 17:52:33 -0000 Subject: [MacPorts] #15540: JRuby port's 'jgem' command installs scripts without env shebang Message-ID: <058.f34b2c51440e78df3ec9ebcd4b9c99b3@macports.org> #15540: JRuby port's 'jgem' command installs scripts without env shebang ------------------------------------+--------------------------------------- Reporter: charles.nutter at sun.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------------+--------------------------------------- JRuby's startup executable is a bash script. When installing gems that reference that executable in their shebang line, /usr/bin/env must be used. But the jgem included with the JRuby port does not do this, so installed scripts don't execute. A future version of RubyGems (1.1.2) will allow alternate implementations to specify their settings (like env shebang) in a specially-named file, but for now the port should make the same RubyGems changes we make for normal JRuby releases. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 11:15:30 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 18:15:30 -0000 Subject: [MacPorts] #15541: ATK fails to configure Message-ID: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> #15541: ATK fails to configure ------------------------------------+--------------------------------------- Reporter: engel.martin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: atk configure | ------------------------------------+--------------------------------------- When trying to install atk it fails due to an error which might be caused by the configure script. The System is Mac OS X 10.5.3 {{{ checking for aclocal flags... checking for GLIB - version >= 2.5.7... no *** A new enough version of pkg-config was not found. *** See http://www.freedesktop.org/software/pkgconfig/ checking pkg-config is at least version 0.16... ./configure: line 20539: no: command not found no checking for GLIB - version >= 2.0.0... no *** A new enough version of pkg-config was not found. *** See http://www.freedesktop.org/software/pkgconfig/ configure: error: *** GLIB 2.0.0 or better is required. The latest version of *** GLIB is always available from ftp://ftp.gtk.org/. If GLIB is installed *** but not in the same location as pkg-config add the location of the file *** glib-2.0.pc to the environment variable PKG_CONFIG_PATH. Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 11:32:50 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 18:32:50 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.3a696a64f57ab83b213d7c3ca77c3376@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: ram at macports.org Type: enhancement | Status: reopened Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * cc: milosh at macports.org (added) * status: closed => reopened * resolution: fixed => Comment: How was it a maintainer timeout? He responded in comment:1. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 11:35:34 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 18:35:34 -0000 Subject: [MacPorts] #15533: ImageMagick 6.4.1-5: checksums fail on upgrade In-Reply-To: <054.a193c20637474026ccf49d6221ca7495@macports.org> References: <054.a193c20637474026ccf49d6221ca7495@macports.org> Message-ID: <063.15b90510f77034c08aea707d2437362b@macports.org> #15533: ImageMagick 6.4.1-5: checksums fail on upgrade ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: duplicate | Keywords: Image Magick ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #15341. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 11:37:29 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 18:37:29 -0000 Subject: [MacPorts] #15538: xsp fetch fails In-Reply-To: <052.0c76e6f4d4d29cf266ae588febe6df35@macports.org> References: <052.0c76e6f4d4d29cf266ae588febe6df35@macports.org> Message-ID: <061.906d85bbc3a0dc050519a6018d6a8fad@macports.org> #15538: xsp fetch fails -------------------------------+-------------------------------------------- Reporter: tjarrett at jhu.edu | Owner: jmr at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned * milestone: => Port Bugs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 11:39:51 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 18:39:51 -0000 Subject: [MacPorts] #15538: xsp fetch fails In-Reply-To: <052.0c76e6f4d4d29cf266ae588febe6df35@macports.org> References: <052.0c76e6f4d4d29cf266ae588febe6df35@macports.org> Message-ID: <061.691cf7e224dcc1056b689cc89bc8a378@macports.org> #15538: xsp fetch fails -------------------------------+-------------------------------------------- Reporter: tjarrett at jhu.edu | Owner: jmr at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Thanks for the report, fixed in r37412. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 11:44:05 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 18:44:05 -0000 Subject: [MacPorts] #15539: libtorrent build failure In-Reply-To: <054.6fbfdd32fda03ae6dd56a0c6deb8f79b@macports.org> References: <054.6fbfdd32fda03ae6dd56a0c6deb8f79b@macports.org> Message-ID: <063.1d0e8bdab560fda6634cf1ae94410cb6@macports.org> #15539: libtorrent build failure ---------------------------------+------------------------------------------ Reporter: quimbley at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: gardnermj at gmail.com (added) * summary: Running into "Error: Status 1" whilst trying to install rtorrent => libtorrent build failure * milestone: => Port Bugs Comment: Cc maintainer. In future, please use proper WikiFormatting when posting preformatted text. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 11:44:28 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 18:44:28 -0000 Subject: [MacPorts] #15540: JRuby port's 'jgem' command installs scripts without env shebang In-Reply-To: <058.f34b2c51440e78df3ec9ebcd4b9c99b3@macports.org> References: <058.f34b2c51440e78df3ec9ebcd4b9c99b3@macports.org> Message-ID: <067.48cf25f74e0e522f1caaceef80b13bac@macports.org> #15540: JRuby port's 'jgem' command installs scripts without env shebang -------------------------------------+-------------------------------------- Reporter: charles.nutter at sun.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * cc: ameingast at gmail.com (added) * milestone: => Port Bugs Comment: Cc maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 11:49:00 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 18:49:00 -0000 Subject: [MacPorts] #15541: ATK fails to configure In-Reply-To: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> References: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> Message-ID: <067.57f9ac252a9bd181c10d662df8c909d1@macports.org> #15541: ATK fails to configure -------------------------------------+-------------------------------------- Reporter: engel.martin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: atk configure -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) Comment: Is the pkgconfig port installed? It should have been installed as a dependency. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 12:07:59 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 19:07:59 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.3ca9c8e7a521c8876b390b78d64dd841@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: ram at macports.org Type: enhancement | Status: reopened Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by ram at macports.org): Sorry, missed that. I've reverted the change in r37413 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 12:19:30 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 19:19:30 -0000 Subject: [MacPorts] #14735: scons-0.97 Change Python version from python24 to python25 In-Reply-To: <051.25612ad1458ce045db23d8aa58d394a3@macports.org> References: <051.25612ad1458ce045db23d8aa58d394a3@macports.org> Message-ID: <060.db235a7a705030486b8384976c6eaecb@macports.org> #14735: scons-0.97 Change Python version from python24 to python25 ------------------------------+--------------------------------------------- Reporter: aronnax at umd.edu | Owner: landonf at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: ------------------------------+--------------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Superseded by #15146. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 12:22:14 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 19:22:14 -0000 Subject: [MacPorts] #15146: Upgrade scons to 0.98.2 and change to use python25 In-Reply-To: <051.493e1066a9a0c1d6934b1cf0240e4558@macports.org> References: <051.493e1066a9a0c1d6934b1cf0240e4558@macports.org> Message-ID: <060.2a13bb80bc7a3f3f85a1a58486b87d61@macports.org> #15146: Upgrade scons to 0.98.2 and change to use python25 ------------------------------+--------------------------------------------- Reporter: aronnax at umd.edu | Owner: landonf at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: scons, python25, python_select ------------------------------+--------------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => fixed Comment: Updated to 0.98.4 in r37414. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 12:32:16 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 19:32:16 -0000 Subject: [MacPorts] #15541: ATK fails to configure In-Reply-To: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> References: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> Message-ID: <067.fbaae5cdd89f14284e00cf62b1b15a5b@macports.org> #15541: ATK fails to configure -------------------------------------+-------------------------------------- Reporter: engel.martin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: atk configure -------------------------------------+-------------------------------------- Comment (by engel.martin at gmail.com): Yes the newest version of pkgconfig is installed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 12:37:19 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 19:37:19 -0000 Subject: [MacPorts] #15541: ATK fails to configure In-Reply-To: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> References: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> Message-ID: <067.77c70daf91499b60c5998528c6b4a175@macports.org> #15541: ATK fails to configure -------------------------------------+-------------------------------------- Reporter: engel.martin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: atk configure -------------------------------------+-------------------------------------- Comment (by engel.martin at gmail.com): glib2 is also installed. Of course I would be more than happy to provide further details to solve this issue. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 14:06:54 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 21:06:54 -0000 Subject: [MacPorts] #15541: ATK fails to configure In-Reply-To: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> References: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> Message-ID: <067.e26b841c64a8aea1e926641e23081c04@macports.org> #15541: ATK fails to configure -------------------------------------+-------------------------------------- Reporter: engel.martin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: atk configure -------------------------------------+-------------------------------------- Comment (by jmr at macports.org): The config.log should tell us more; please attach it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 14:29:12 2008 From: noreply at macports.org (MacPorts) Date: Fri, 06 Jun 2008 21:29:12 -0000 Subject: [MacPorts] #15541: ATK fails to configure In-Reply-To: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> References: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> Message-ID: <067.68f3cc621ef102eae8cebfd7b0e0b6f0@macports.org> #15541: ATK fails to configure -------------------------------------+-------------------------------------- Reporter: engel.martin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: atk configure -------------------------------------+-------------------------------------- Comment (by engel.martin at gmail.com): contrary to the statement in config.log pkgconfig is installed. {{{ port list installed | grep pkgconfig pkgconfig @0.23 devel/pkgconfig }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 17:39:09 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 00:39:09 -0000 Subject: [MacPorts] #15542: webkit-gtk should depend on gst-plugins-base Message-ID: <055.45d2208745381bebcaf08dae6ecf15c7@macports.org> #15542: webkit-gtk should depend on gst-plugins-base ---------------------------------+------------------------------------------ Reporter: eekee57 at fastmail.fm | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ webkit-gtk configure fails on pkg-config not finding gstreamer-plugins- base-0.10. If gst-plugins-base is installed before webkit-gtk, webkit-gtk configures. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 18:27:12 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 01:27:12 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.cf089dcc0890c9e494f9532404114805@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by macports at flyn.org): Okay, good. I think we've got this bug figured out then.[[BR]] [[BR]] I would like to see a cairo variant build the Quartz font backend without the freetype backend. Once the Quartz GTK2 stack is stable, freetype should be unnecessary (two font engines is quite redundant) unless one wants to use X11 applications for their network-centricity. I think using "quartz" (build quartz & avoid freetype) and "no_x11" (avoid X11) like the GTK2 port will avoid confusion. GTK2's Portfile even says "cairo must be installed with the quartz variant enabled." -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 19:09:26 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 02:09:26 -0000 Subject: [MacPorts] #15339: rsync 3.0.2 does not build on Darwin 7 (Mac OS X 10.3 Panther); fix included In-Reply-To: <052.fafd3412aaa04284ad5e8c364c8e131d@macports.org> References: <052.fafd3412aaa04284ad5e8c364c8e131d@macports.org> Message-ID: <061.cbe1995478cbb6355fe9d1f9a11fd131@macports.org> #15339: rsync 3.0.2 does not build on Darwin 7 (Mac OS X 10.3 Panther); fix included -------------------------------+-------------------------------------------- Reporter: martijn at inlv.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: rsync darwin7 panther -------------------------------+-------------------------------------------- Comment (by jrnieder at hotmail.com): Note that there is a patch to get rsync with xattrs working in OS X 10.3: see http://thread.gmane.org/gmane.network.rsync.general/16931/focus=17305 . -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 19:13:00 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 02:13:00 -0000 Subject: [MacPorts] #15339: rsync 3.0.2 does not build on Darwin 7 (Mac OS X 10.3 Panther); fix included In-Reply-To: <052.fafd3412aaa04284ad5e8c364c8e131d@macports.org> References: <052.fafd3412aaa04284ad5e8c364c8e131d@macports.org> Message-ID: <061.bdd48561947d87facbb17aff3697ab70@macports.org> #15339: rsync 3.0.2 does not build on Darwin 7 (Mac OS X 10.3 Panther); fix included -------------------------------+-------------------------------------------- Reporter: martijn at inlv.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: rsync darwin7 panther -------------------------------+-------------------------------------------- Comment (by jrnieder at hotmail.com): Oops - see http://thread.gmane.org/gmane.network.rsync.general/17315/focus=17319 for a newer version. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 6 23:43:47 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 06:43:47 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.641e816ecb68fc94c0f60c84cef7c294@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by ryandesign at macports.org): Replying to [comment:16 macports at flyn.org]: > I would like to see a cairo variant build the Quartz font backend without the freetype backend. Once the Quartz GTK2 stack is stable, freetype should be unnecessary (two font engines is quite redundant) unless one wants to use X11 applications for their network-centricity. I think using "quartz" (build quartz & avoid freetype) and "no_x11" (avoid X11) like the GTK2 port will avoid confusion. A variant called "quartz" will make people think they need to use that variant to get Quartz functionality, which isn't true; Quartz functionality is always enabled on Mac OS X, since cairo 1.6.x. In MacPorts we usually like to build ports with maximal functionality. In this case, that would be a cairo port that supports as many backends as possible. That's what I do now. I could probably add a variant to disable fontconfig support, if there's a strong desire for that. Such a request should be made in a separate ticket. Note that all software that uses cairo must be written to support all backends. You can't just compile cairo with Quartz support and expect all cairo-using applications to know how to use Quartz. Each app must be written for this. Not all apps are. So there will likely be some cairo-using apps that need fontconfig. Even if today you only need GTK2 with only Quartz support, tomorrow you may want to install an unrelated app which happens to require cairo with fontconfig. So why not install a cairo with all possible backends in the first place? Which is what we offer now. (Except for glitz support. Which is in a variant. I don't know anything about glitz.) > GTK2's Portfile even says "cairo must be installed with the quartz variant enabled." That must be from the cairo 1.4.x days, when quartz support was still experimental, disabled by default, and therefore in a variant. In cairo 1.6.x, the Quartz backend was marked stable, and enabled by default, therefore I removed the variant and integrated it into the core port. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 00:49:42 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 07:49:42 -0000 Subject: [MacPorts] #15541: ATK fails to configure In-Reply-To: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> References: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> Message-ID: <067.dac434171a2b21bdab9c7e69b7cf8c54@macports.org> #15541: ATK fails to configure -------------------------------------+-------------------------------------- Reporter: engel.martin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: atk configure -------------------------------------+-------------------------------------- Comment (by jmr at macports.org): Just FYI, `port list installed` doesn't do what you want there, `port installed` does. But it doesn't really make any difference in this case. A though occurs: what happens if you run `port clean atk` and then try installing it again? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 00:59:49 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 07:59:49 -0000 Subject: [MacPorts] #15543: vtun upgrade Message-ID: <048.6fd9568a2c0fc073dda679a69850d665@macports.org> #15543: vtun upgrade --------------------------+------------------------------------------------- Reporter: lee at leev.net | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: vtun upgrade | --------------------------+------------------------------------------------- Hi, I have just downloaded vtun-3.0.1 from sourceforge and compiled it successfully without needing to use any patch. I installed lzo2 from ports and ran configure for vtun using the following: ./configure --with-lzo-headers=/opt/local/include/lzo/ Currently 2.6 is set to use lzo, however it seems to work fine with lzo2. Could the current vtun port be upgraded to 3.0.1 please? Thanks, Lee -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 02:43:33 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 09:43:33 -0000 Subject: [MacPorts] #15541: ATK fails to configure In-Reply-To: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> References: <058.de253428c3d56c5c15c8ffd0fa3c9f68@macports.org> Message-ID: <067.b1c52d4bc215a6935a9c91f791ae197b@macports.org> #15541: ATK fails to configure -------------------------------------+-------------------------------------- Reporter: engel.martin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: atk configure -------------------------------------+-------------------------------------- Comment (by engel.martin at gmail.com): same error :( when cleaning and installing again. (btw thanks for the {{{port installed}}} hint) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 05:41:36 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 12:41:36 -0000 Subject: [MacPorts] #15544: Update py25-genshi to 0.4.4. Message-ID: <054.a65b294edc1bf207b6361f0526385614@macports.org> #15544: Update py25-genshi to 0.4.4. --------------------------------+------------------------------------------- Reporter: simon at macports.org | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- Hi, please update py25-genshi to version 0.4.4. Patch is attached and works fine for me. Thanks, Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 05:49:06 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 12:49:06 -0000 Subject: [MacPorts] #15544: Update py25-genshi to 0.4.4. In-Reply-To: <054.a65b294edc1bf207b6361f0526385614@macports.org> References: <054.a65b294edc1bf207b6361f0526385614@macports.org> Message-ID: <063.f45e87bcdd8d62046920d176d34c6370@macports.org> #15544: Update py25-genshi to 0.4.4. ---------------------------------+------------------------------------------ Reporter: simon at macports.org | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by simon at macports.org): By the way, I just noticed that the description is wrong, it describes ToscaWidgets instead of Genshi. Maybe you can use this one: {{{ long_description Genshi is a Python library that provides an \ integrated set of components for parsing, \ generating, and processing HTML, XML or other \ textual content for output generation on the \ web. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 06:13:25 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 13:13:25 -0000 Subject: [MacPorts] #15545: ImageMagick-6.4.1-5 - checksum mismatch Message-ID: <056.30d29c08a6a566de154cdbc3360c1733@macports.org> #15545: ImageMagick-6.4.1-5 - checksum mismatch ----------------------------------+----------------------------------------- Reporter: face at centosprime.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ----------------------------------+----------------------------------------- {{{ ---> Fetching ImageMagick ---> Attempting to fetch ImageMagick-6.4.1-5.tar.bz2 from http://internap.dl.sourceforge.net/imagemagick ---> Verifying checksum(s) for ImageMagick Error: Checksum (md5) mismatch for ImageMagick-6.4.1-5.tar.bz2 Error: Checksum (sha1) mismatch for ImageMagick-6.4.1-5.tar.bz2 Error: Checksum (rmd160) mismatch for ImageMagick-6.4.1-5.tar.bz2 Error: Target org.macports.checksum returned: Unable to verify file checksums Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 06:44:04 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 13:44:04 -0000 Subject: [MacPorts] #15545: ImageMagick-6.4.1-5 - checksum mismatch In-Reply-To: <056.30d29c08a6a566de154cdbc3360c1733@macports.org> References: <056.30d29c08a6a566de154cdbc3360c1733@macports.org> Message-ID: <065.c755ea1d1d1f6b27c199577225331c0c@macports.org> #15545: ImageMagick-6.4.1-5 - checksum mismatch -----------------------------------+---------------------------------------- Reporter: face at centosprime.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: -----------------------------------+---------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #15341. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 08:15:23 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 15:15:23 -0000 Subject: [MacPorts] #15397: libuninum distfile changed In-Reply-To: <054.71aa70a1496aeaf60f82d50b7d7fa850@macports.org> References: <054.71aa70a1496aeaf60f82d50b7d7fa850@macports.org> Message-ID: <063.836c8313d1f809d2c51ab25ae4591d4d@macports.org> #15397: libuninum distfile changed ---------------------------------+------------------------------------------ Reporter: simon at macports.org | Owner: mww at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ---------------------------------+------------------------------------------ Changes (by simon at macports.org): * status: new => closed * resolution: => fixed Comment: I committed this in r37432. If you don't like this change just revert it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 08:55:22 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 15:55:22 -0000 Subject: [MacPorts] #15520: upgrade processes the same dep multiple times if different depspecs are used In-Reply-To: <052.6cd48754bd308b3bfc97ea0b5b4c0fc0@macports.org> References: <052.6cd48754bd308b3bfc97ea0b5b4c0fc0@macports.org> Message-ID: <061.32a1d795ece6467c57eb2b808459c4c6@macports.org> #15520: upgrade processes the same dep multiple times if different depspecs are used -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Low | Milestone: MacPorts base bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => fixed Comment: Committed the fix in r37433. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 09:15:34 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 16:15:34 -0000 Subject: [MacPorts] #15546: e2fsprogs port bug Message-ID: <055.65ad168245ea2eb0d8a226c58f7a3ab4@macports.org> #15546: e2fsprogs port bug ---------------------------------+------------------------------------------ Reporter: groolot at groolot.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: e2fsprogs library | ---------------------------------+------------------------------------------ = Context = Under Mac OS X Leopard 10.5.3, I tried to do a standard install of the {{{e2fsprogs}}} port. Everything works fine until the launch of some binaries. = What happend ? = When I try to execute a binary from this port, such as {{{mkfs.ext3}}}, i found that : {{{ dyld: Library not loaded: libext2fs.2.1.dylib Referenced from: /opt/local/sbin/mkfs.ext3 Reason: image not found Trace/BPT trap }}} It seems to be an error inside the hardcoded Path of the library into {{{libext2fs.2.1.dylib}}} of the {{{mkfs.ext3}}} prog. I look inside the prog with {{{otool}}} to find an effective answer : {{{ opt/local/sbin/mkfs.ext3: libext2fs.2.1.dylib (compatibility version 1.0.0, current version 2.1.0) libcom_err.1.1.dylib (compatibility version 1.0.0, current version 1.1.0) libblkid.2.0.dylib (compatibility version 1.0.0, current version 2.0.0) libuuid.1.1.dylib (compatibility version 1.0.0, current version 1.1.0) libe2p.2.1.dylib (compatibility version 1.0.0, current version 2.1.0) /usr/local/lib/libintl.3.dylib (compatibility version 8.0.0, current version 8.3.0) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.1.1) }}} But {{{mkfs.ext3}}} normally should expect that the libraries are not in the current directory ... = Reproductibility = Discussing primarly with Michael SCHERER, the maintainer of the port, he has experienced the same problem with the current version of the port (v. 1.40.6). We have found some ways to make it functional : * doing {{{cd /opt/local/bin}}} and then launch {{{mkfs.ext3}}} * making some links from {{{/opt/local/lib/needed_library}}} to {{{/opt/local/bin}}} What an idiot way of resolving the problem ... Hope that could help you. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 09:15:35 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 16:15:35 -0000 Subject: [MacPorts] #15547: cannot compile transcode Message-ID: <060.f000d4bca59ed34370a93768c220c22a@macports.org> #15547: cannot compile transcode --------------------------------------+------------------------------------- Reporter: laurent.perron at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------+------------------------------------- sudo port install transcode +a52dev +x264 +xvid lead to the following error: /usr/bin/gcc-4.0 -I/opt/local/include -I/opt/local/include -I/opt/local/include -Wall -Wstrict-prototypes -Wmissing-prototypes -O2 -no-cpp-precomp -D_INTL_REDIRECT_MACROS -o tcdecode tcdecode-tcdecode.o tcdecode-fileinfo.o tcdecode-ioaux.o tcdecode-mpg123.o tcdecode- decode_a52.o tcdecode-decode_dv.o tcdecode-decode_lavc.o tcdecode- decode_lzo.o tcdecode-decode_mov.o tcdecode-decode_mp3.o tcdecode- decode_mpeg2.o tcdecode-decode_ogg.o tcdecode-decode_yuv.o -L/opt/local/lib -lavcodec /opt/local/lib/libmp3lame.dylib /opt/local/lib/libmpeg2.dylib ../libtcvideo/.libs/libtcvideo.a ../aclib/.libs/libac.a ../libtc/.libs/libtc.a -lm -lz -ldl Undefined symbols: "_mpeg2convert_rgb24", referenced from: _mpeg2convert_rgb24$non_lazy_ptr in tcdecode-decode_mpeg2.o I am running leopard using xcode 3.0 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 09:25:37 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 16:25:37 -0000 Subject: [MacPorts] #14123: base-1.6.0 "port uninstall" left installed files at case-sensitive FS In-Reply-To: <049.2f1ff7b7b823adc960252039260e1af8@macports.org> References: <049.2f1ff7b7b823adc960252039260e1af8@macports.org> Message-ID: <058.1dc90606cc7a84b38e3c8a8b2a30b235@macports.org> #14123: base-1.6.0 "port uninstall" left installed files at case-sensitive FS ----------------------------+----------------------------------------------- Reporter: ononon at csc.jp | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: MacPorts base bugs Component: base | Version: 1.6.0 Resolution: | Keywords: ----------------------------+----------------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org, pguyot at kallisys.net (added) Comment: The attached patch should do what you're asking for. Paul, you wrote this code?will this break anything? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 09:42:44 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 16:42:44 -0000 Subject: [MacPorts] #11759: BUG: case-sensitive port uninstall In-Reply-To: <057.05b84e956a5a63148034c136dcfb3720@macports.org> References: <057.05b84e956a5a63148034c136dcfb3720@macports.org> Message-ID: <066.49df8bfce5b9c273498c3d8c722e7b4a@macports.org> #11759: BUG: case-sensitive port uninstall ------------------------------------+--------------------------------------- Reporter: yunzheng.hu at gmail.com | Owner: eridius at macports.org Type: defect | Status: assigned Priority: High | Milestone: MacPorts 1.6.1 Component: base | Version: Resolution: | Keywords: port uninstall case-sensitive ------------------------------------+--------------------------------------- Changes (by jmr at macports.org): * cc: pguyot at kallisys.net (added) Comment: I think that raimue's patch should actually be applied as well. The flat- file registry prevents us from having ports with names that differ only in case when running on a case-insensitive filesystem (even if we considered allowing them a good idea). My patch extends that restriction to case- sensitive filesystems. I made sure to use the canonical name whenever possible, but it's pretty easy to end up using the name as entered by the user, so it could easily happen in future code, breaking things again. We should therefore make the filemap treat port names case-insensitively as well. Of course, my reasoning falls down if the filemap code is used for anything other than associating file paths with port names. Is it? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 11:49:22 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 18:49:22 -0000 Subject: [MacPorts] #13244: clisp does not build on 10.5 MacBook Pro; fails with "CPPFLAGS has changed" In-Reply-To: <057.b0da6cdf02707a464ea583930a0bc20d@macports.org> References: <057.b0da6cdf02707a464ea583930a0bc20d@macports.org> Message-ID: <066.2fe0a67c8e038349379c511954b7653e@macports.org> #13244: clisp does not build on 10.5 MacBook Pro; fails with "CPPFLAGS has changed" ------------------------------------+--------------------------------------- Reporter: jaroom at mindspring.com | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.0 Resolution: | Keywords: clisp ------------------------------------+--------------------------------------- Comment (by anthony.hw.kong at gmail.com): Same happened to mine (10.5.3). Here is the uname output. Darwin mymac 9.3.0 Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386 i386 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 15:59:00 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 22:59:00 -0000 Subject: [MacPorts] #15548: [Port Abandoned] tokyocabinet Message-ID: <054.cddbdcf659c5439846a7cdb692e72dc6@macports.org> #15548: [Port Abandoned] tokyocabinet --------------------------------+------------------------------------------- Reporter: akira at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- The original unacknowledged ticket: ticket:15205 I tried to contact him by email but got no answer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 16:08:48 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 23:08:48 -0000 Subject: [MacPorts] #15205: tokyocabinet update request In-Reply-To: <054.2e753e6b887e784327770bdcb349a739@macports.org> References: <054.2e753e6b887e784327770bdcb349a739@macports.org> Message-ID: <063.bcb7076b1c0fb889f1151462469fa94f@macports.org> #15205: tokyocabinet update request ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: akira at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ---------------------------------+------------------------------------------ Changes (by akira at macports.org): * status: new => closed * resolution: => fixed Comment: maintainer timeout. Committed in r37441 See also: ticket:15548 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 16:26:51 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 23:26:51 -0000 Subject: [MacPorts] #15549: Deluge update to 0.5.9.1 Message-ID: <053.f8a2d4ae3f3f9d175d9351c4d268b622@macports.org> #15549: Deluge update to 0.5.9.1 -------------------------------+-------------------------------------------- Reporter: yogi613 at yahoo.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: Deluge | -------------------------------+-------------------------------------------- Updating deluge to version 0.5.9.1 from version 0.5.8.9. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 16:51:12 2008 From: noreply at macports.org (MacPorts) Date: Sat, 07 Jun 2008 23:51:12 -0000 Subject: [MacPorts] #14761: Cannot build proctools on Leopard In-Reply-To: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> References: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> Message-ID: <063.a066671b1bedcaf3fac5bc3dc16dd880@macports.org> #14761: Cannot build proctools on Leopard ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: akira at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: leopard proctools kvm ---------------------------------+------------------------------------------ Comment (by akira at macports.org): Thanks guys! I'll look into this. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 18:31:18 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 01:31:18 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.4671fdb3086a675462a6cbb1e5e9da02@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: ram at macports.org Type: enhancement | Status: reopened Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by raimue at macports.org): Replying to [comment:1 milosh at macports.org]: > Making it depend on python_select would be a good idea however. As python_select can't depend on any specific version of python, this won't work. Until we get a better dependency engine, my advice would be to add variants for each python version (+python24, +python25 etc.). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 22:31:05 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 05:31:05 -0000 Subject: [MacPorts] #15397: libuninum distfile changed In-Reply-To: <054.71aa70a1496aeaf60f82d50b7d7fa850@macports.org> References: <054.71aa70a1496aeaf60f82d50b7d7fa850@macports.org> Message-ID: <063.c7c1a97f4de36b375430897d7790e3f6@macports.org> #15397: libuninum distfile changed ---------------------------------+------------------------------------------ Reporter: simon at macports.org | Owner: mww at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ---------------------------------+------------------------------------------ Comment (by ryandesign at macports.org): When changing portfile checksums because an upstream distfile changed without the filename changing, you must also change the dist_subdir so that the new distfile goes to a different place than the old file. Otherwise users who had the existing distfile downloaded already will get a checksum error. Now that we have a [http://distfiles.macports.org/ distfiles mirror], it's even more important to ensure each unique distfile gets a unique location in the distfiles directory. Otherwise the distfiles mirror doesn't get updated either. If the new distfile is not just a repackaging, but actually causes different files to be installed, then you must also Increase the port revision. I can confirm by comparing the old and new distfiles that there are hundreds of lines of diffs. I increased the port revision and changed the dist_subdir in r37443. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 22:38:09 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 05:38:09 -0000 Subject: [MacPorts] #14761: Cannot build proctools on Leopard In-Reply-To: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> References: <054.e5a6489045e1e8d925d80f4a8bc23f7e@macports.org> Message-ID: <063.f7b9489771f10a969eaa906e1085d891@macports.org> #14761: Cannot build proctools on Leopard ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: akira at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: leopard proctools kvm ---------------------------------+------------------------------------------ Changes (by akira at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed in r36179. Thanks your the contribution! BTW, It would be nice to send these patches to upstream. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 22:56:41 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 05:56:41 -0000 Subject: [MacPorts] #15341: ImageMagick checksum mismatches In-Reply-To: <057.cec29f15cd256ba0bdebef694d298d57@macports.org> References: <057.cec29f15cd256ba0bdebef694d298d57@macports.org> Message-ID: <066.77622917b6bb7906a7fc74f857f924b2@macports.org> #15341: ImageMagick checksum mismatches ------------------------------------+--------------------------------------- Reporter: shirose at jamstec.go.jp | Owner: ryandesign at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by ryandesign at macports.org): Chris Janton also [http://lists.macosforge.org/pipermail/macports- users/2008-June/010596.html reported this] on macports-users. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 7 23:37:20 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 06:37:20 -0000 Subject: [MacPorts] #15550: luarocks patch Message-ID: <059.90469d8eb4972017486b44e5b60df1fa@macports.org> #15550: luarocks patch -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: andrea.damore at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- Here's a patch to fix some issues with luarocks, I think. (I don't actually use luarocks). * You have variants openssl and md5 which I think you intend to be conflicting with one another, but they're not marked as such. Same goes for variants wget and curl. * Your variants include statements to remove dependencies and configure arguments which have never been added in the first place. * The port declared a dependency on wget by default even though wget is now a variant. * I think you meant for one of openssl and md5 to always be selected, and one of wget and curl to always be selected, but didn't write the portfile that way. It was possible to install it with no variant selected. * You had the dependencies declared as library dependencies, but the port installs only text files, no binaries, so it doesn't use any libraries. Rather, these are runtime dependencies. * Since the port installs no binaries, the universal variant should be disabled. Attempting to use the universal variant results in the error "Unknown flag: --disable-dependency-tracking" Remaining issues not solved by my patch: * Your md5 variant configures luarocks to use the md5sum program to check files, but Mac OS X does not include the md5sum program. You can get it by installing the coreutils port, but there it's called gmd5sum, unless coreutils is installed with the with_default_names variant. So either change the md5 variant to use the gmd5sum program and declare a dependency on port:coreutils, or maybe just remove the md5 variant altogether (unless there's a big advantage to using gmd5sum vs. openssl that I'm not aware of). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 00:39:16 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 07:39:16 -0000 Subject: [MacPorts] #15341: ImageMagick checksum mismatches In-Reply-To: <057.cec29f15cd256ba0bdebef694d298d57@macports.org> References: <057.cec29f15cd256ba0bdebef694d298d57@macports.org> Message-ID: <066.a4c286e2ab65c9f9deca6f561aee2921@macports.org> #15341: ImageMagick checksum mismatches ------------------------------------+--------------------------------------- Reporter: shirose at jamstec.go.jp | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ------------------------------------+--------------------------------------- Changes (by ryandesign at macports.org): * status: reopened => closed * resolution: => fixed Comment: I checked the distfiles on all mirrors listed in the portfile. SourceForge is the only mirror with files of a different checksum. I [http://studio.imagemagick.org/pipermail/magick-bugs/2008-June/002955.html reported this] to the magick-bugs mailing list, and disabled the SourceForge download location in the port in r37445 until they fix it. For those experiencing the issue, please wait 30 minutes, selfupdate, clean, and try again. {{{ sudo port selfupdate sudo port clean --all ImageMagick }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 00:50:26 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 07:50:26 -0000 Subject: [MacPorts] #15551: Patch updating dnsmasq to 2.42 Message-ID: <058.c2cde63a39a4f2ea25b5587291ab1c3d@macports.org> #15551: Patch updating dnsmasq to 2.42 ------------------------------------+--------------------------------------- Reporter: davidgilman1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: dnsmasq | ------------------------------------+--------------------------------------- Attached are patches against the port for dnsmasq to bump to version 2.42. I've also added a startupitem to the Portfile. There is no maintainer for this port. One question though: the package by default installs an example config file. I think it would be appropriate to remind the user to set this up before loading the package into launchd. What would be the best way to do this? (macports is really cool, i had no idea about this startupitem option until just a bit ago.) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 01:22:29 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 08:22:29 -0000 Subject: [MacPorts] #15552: Grails 1.0.3 port Message-ID: <054.1c0269f02a17d078672e15a79fc82ac1@macports.org> #15552: Grails 1.0.3 port --------------------------------+------------------------------------------- Reporter: tomaslin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: grails java devel | --------------------------------+------------------------------------------- Hi, this is a port for the grails project -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 01:31:43 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 08:31:43 -0000 Subject: [MacPorts] #14918: sphinx-0.9.8-rc2 Update to latest available version of port In-Reply-To: <052.8f6226dccc6237da97ec1489b016e5a8@macports.org> References: <052.8f6226dccc6237da97ec1489b016e5a8@macports.org> Message-ID: <061.1e0793dc17a8eba2fb03ea1871d5fba4@macports.org> #14918: sphinx-0.9.8-rc2 Update to latest available version of port -------------------------------+-------------------------------------------- Reporter: apsoto at gmail.com | Owner: brett at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: sphinx portfile -------------------------------+-------------------------------------------- Comment (by macports at tmm1.net): bump -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 01:40:49 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 08:40:49 -0000 Subject: [MacPorts] #15209: cairo+quartz broken: cairo-quartz-font pkgconfig pc file is not installed In-Reply-To: <063.e4572145e657a09e2aa70511eaeddebc@macports.org> References: <063.e4572145e657a09e2aa70511eaeddebc@macports.org> Message-ID: <072.4f5ff2eeb7a78c1ecbee91488fb8770d@macports.org> #15209: cairo+quartz broken: cairo-quartz-font pkgconfig pc file is not installed ------------------------------------------+--------------------------------- Reporter: shreevatsa.public at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ------------------------------------------+--------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: I believe I've addressed all this in r37447. Please wait 12 hours, then "`sudo port selfupdate`", then "`sudo port upgrade cairo`", then upgrade any dependents of cairo so they see the new `cairo-quartz-font.pc` file. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 01:42:10 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 08:42:10 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.ef0a03a00be4036b2e5e93ccaca2f960@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by ryandesign at macports.org): I believe I fixed #15209. Please follow instructions there and let me know if that fixes this issue as well. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 02:01:31 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 09:01:31 -0000 Subject: [MacPorts] #15265: Problem when installing pallet In-Reply-To: <060.a6d511f2533ab09391ed8118bdaa6b2e@macports.org> References: <060.a6d511f2533ab09391ed8118bdaa6b2e@macports.org> Message-ID: <069.20e1713f10253d94849162a2921681fb@macports.org> #15265: Problem when installing pallet ---------------------------------------+------------------------------------ Reporter: sebastien.jubeau at free.fr | Owner: rhwood at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: ---------------------------------------+------------------------------------ Changes (by rhwood at macports.org): * status: new => closed * resolution: => wontfix Comment: Pallet is too unstable and too unworkable at this point to package, so it is fetched from SVN. Once Pallet is ready for prime time, it will be packaged. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 02:03:26 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 09:03:26 -0000 Subject: [MacPorts] #15524: pallet-0.1.0 patch to fix absolute paths In-Reply-To: <052.51cbfc371f401fff1ee85e1591017ebb@macports.org> References: <052.51cbfc371f401fff1ee85e1591017ebb@macports.org> Message-ID: <061.99e882e599e47632e1e2fb5cf81fb565@macports.org> #15524: pallet-0.1.0 patch to fix absolute paths -------------------------------+-------------------------------------------- Reporter: adioso at gmail.com | Owner: rhwood at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: pallet absolute paths -------------------------------+-------------------------------------------- Changes (by rhwood at macports.org): * status: new => closed * resolution: => fixed Comment: In r37448 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 02:05:05 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 09:05:05 -0000 Subject: [MacPorts] #15525: pallet-0.1.0 patches to add support for Leopard In-Reply-To: <052.428a4a614b2cdfa9813b65c3466c9e61@macports.org> References: <052.428a4a614b2cdfa9813b65c3466c9e61@macports.org> Message-ID: <061.46e173f03e256385f6824fa2e0fa4ab9@macports.org> #15525: pallet-0.1.0 patches to add support for Leopard -------------------------------+-------------------------------------------- Reporter: adioso at gmail.com | Owner: rhwood at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: pallet leopard -------------------------------+-------------------------------------------- Changes (by rhwood at macports.org): * status: new => closed * resolution: => fixed Comment: In r37448 If this fails to build, please reopen this ticket -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 02:15:35 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 09:15:35 -0000 Subject: [MacPorts] #15550: luarocks patch In-Reply-To: <059.90469d8eb4972017486b44e5b60df1fa@macports.org> References: <059.90469d8eb4972017486b44e5b60df1fa@macports.org> Message-ID: <068.c2452b4489a94671378122c9a33a8922@macports.org> #15550: luarocks patch --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: andrea.damore at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by andrea.damore at macports.org): * status: new => closed * resolution: => fixed Comment: * I couldn't remember the conflicts syntax, I wrote it this way and made a note to fix it later. * I tought removing an option that is not configured couldn't harm, I tought it simply had no effect. * The wget dependency was a legacy from previous version, I forgot to remove it when adding the variant. * The point is that luarocks will choose between one of curl and wget/md5 and openssl or fail. My idea is to let the user explicitly choose them with variants or just leave the system autodetect. * I didn't checked the kind of executables, therefore the library dependencies. * Didn't knew about this. That said I see md5 on my system is /sbin/md5 so I tought it came with darwin, I don't know of advantage of md5 over openssl so to me it is just fine to have openssl by default. I've commited your patch and I'm marking this ticket as fixed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 02:34:18 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 09:34:18 -0000 Subject: [MacPorts] #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno-long-double Message-ID: <054.ba15af79f4ddb3669eddccdd3f4fc33f@macports.org> #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno- long-double --------------------------------+------------------------------------------- Reporter: dstndstn at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- I get: {{{ # port build py25-numeric ---> Building py25-numeric with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-numeric/work/Numeric-24.2" && /opt/local/bin/python2.5 setup.py build " returned error 1 Command output: running build running build_py running build_ext building '_numpy' extension gcc -fno-strict-aliasing -Wno-long-double -no-cpp-precomp -mno-fused-madd -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -IInclude -IPackages/FFT/Include -IPackages/RNG/Include -I/opt/local/include/python2.5 -c Src/_numpymodule.c -o build/temp.macosx-10.3-ppc-2.5/Src/_numpymodule.o gcc: unrecognized option '-no-cpp-precomp' cc1: error: unrecognized command line option "-Wno-long-double" error: command 'gcc' failed with exit status 1 Error: Status 1 encountered during processing. }}} I have: {{{ # gcc --version gcc (GCC) 4.0.0 Copyright (C) 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:00:36 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:00:36 -0000 Subject: [MacPorts] #15554: gnome-terminal 2.22.1_0 Incompatible library version Message-ID: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> #15554: gnome-terminal 2.22.1_0 Incompatible library version --------------------------------+------------------------------------------- Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- I installed gnome-terminal, but i can not start the terminal, here the output: $ gnome-terminal dyld: Library not loaded: /usr/X11/lib/libpng12.0.dylib Referenced from: /usr/X11/lib/libcairo.2.dylib Reason: Incompatible library version: libcairo.2.dylib requires version 27.0.0 or later, but libpng12.0.dylib provides version 25.0.0 Trace/BPT trap I have MPB with 10.5.3 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:14:25 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:14:25 -0000 Subject: [MacPorts] #15555: py25-numpy 1.0.4 build error Message-ID: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> #15555: py25-numpy 1.0.4 build error -----------------------------------+---------------------------------------- Reporter: janakawicks at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: py25-numpy | -----------------------------------+---------------------------------------- {{{ following is the debug output janaka$ sudo port -d install py25-numpy DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy DEBUG: Requested variant powerpc is not provided by port py25-numpy. DEBUG: Requested variant darwin is not provided by port py25-numpy. DEBUG: Requested variant macosx is not provided by port py25-numpy. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 DEBUG: Requested variant powerpc is not provided by port python25. DEBUG: Requested variant darwin is not provided by port python25. DEBUG: Requested variant macosx is not provided by port python25. DEBUG: Executing variant darwin_8 provides darwin_8 DEBUG: Searching for dependency: python25 DEBUG: Found Dependency: receipt exists for python25 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 DEBUG: Requested variant powerpc is not provided by port fftw-3. DEBUG: Requested variant darwin is not provided by port fftw-3. DEBUG: Requested variant macosx is not provided by port fftw-3. DEBUG: Searching for dependency: fftw-3 DEBUG: Found Dependency: receipt exists for fftw-3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-hashlib DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-hashlib DEBUG: Requested variant powerpc is not provided by port py25-hashlib. DEBUG: Requested variant darwin is not provided by port py25-hashlib. DEBUG: Requested variant macosx is not provided by port py25-hashlib. DEBUG: Searching for dependency: py25-hashlib DEBUG: Found Dependency: receipt exists for py25-hashlib DEBUG: Executing org.macports.main (py25-numpy) ---> Fetching py25-numpy DEBUG: Executing org.macports.fetch (py25-numpy) ---> Verifying checksum(s) for py25-numpy DEBUG: Executing org.macports.checksum (py25-numpy) ---> Checksumming numpy-1.0.4.tar.gz DEBUG: Correct (md5) checksum for numpy-1.0.4.tar.gz DEBUG: Correct (sha1) checksum for numpy-1.0.4.tar.gz DEBUG: Correct (rmd160) checksum for numpy-1.0.4.tar.gz ---> Extracting py25-numpy DEBUG: Executing org.macports.extract (py25-numpy) ---> Extracting numpy-1.0.4.tar.gz DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/python/numpy-1.0.4.tar.gz DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-numpy/work" && gzip -dc /opt/local/var/macports/distfiles/python/numpy-1.0.4.tar.gz | /usr/bin/gnutar --no-same-owner -xf -' DEBUG: Executing org.macports.patch (py25-numpy) ---> Applying patches to py25-numpy ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy/files /patch-g95_link.diff DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-numpy/work/numpy-1.0.4" && patch -p0' patching file numpy/distutils/fcompiler/g95.py ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy/files /patch-f2py_rules.py.diff DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-numpy/work/numpy-1.0.4" && patch -p0' patching file numpy/f2py/rules.py DEBUG: Executing proc-post-org.macports.patch-patch-0 ---> Configuring py25-numpy DEBUG: Executing org.macports.configure (py25-numpy) DEBUG: Using compiler 'Mac OS X gcc 4.0' ---> Building py25-numpy with target build DEBUG: Executing org.macports.build (py25-numpy) DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-numpy/work/numpy-1.0.4" && /opt/local/bin/python2.5 setup.py build' Running from numpy source directory. Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-numpy/work/numpy-1.0.4" && /opt/local/bin/python2.5 setup.py build " returned error 139 Command output: Running from numpy source directory. Warning: the following items did not execute (for py25-numpy): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. I did a port clean --all py25-numpy as well as port sync here is the Portfile after sync # $Id: Portfile 37408 2008-06-06 13:24:41Z ram at macports.org $ PortSystem 1.0 PortGroup python25 1.0 name py25-numpy version 1.0.4 revision 8 categories python platforms darwin maintainers ram openmaintainer description The core utilities for the scientific library scipy for Python long_description ${description} homepage http://numpy.scipy.org/ master_sites sourceforge:numpy distname numpy-${version} checksums md5 8f011e9d7697da570efaac61c51725e0 \ sha1 9a1f09358c3310cf990eecd06dc2eb54aec78321 \ rmd160 8ac192ad3f36a94a45c26e0c4028fdbb744881f5 patchfiles patch-g95_link.diff \ patch-f2py_rules.py.diff depends_lib-append port:fftw-3 \ port:py25-hashlib post-patch { reinplace "s|@@MPORTS_PREFIX@@|${prefix}|" ${worksrcpath}/numpy/distutils/fcompiler/g95.py } livecheck.distname NumPy also, janaka$ sw_vers ProductName: Mac OS X ProductVersion: 10.4.11 BuildVersion: 8S165 I also have the latest XCode installed.. (2.5) Another observation is that when py25-* package is installing it eats up about 80-90% CPU and 2.0GB vsize (Total Memory Size) Thanks.. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:40:49 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:40:49 -0000 Subject: [MacPorts] #15534: New port: p5-mail-sender In-Reply-To: <053.da4cf61f347c542d661059c108a9a259@macports.org> References: <053.da4cf61f347c542d661059c108a9a259@macports.org> Message-ID: <062.89806f704fd6143cef4f658e91712c95@macports.org> #15534: New port: p5-mail-sender --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: raimue at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: mail, sender, perl --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * owner: macports-tickets at lists.macosforge.org => raimue at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:40:53 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:40:53 -0000 Subject: [MacPorts] #15535: New port p5-net-id In-Reply-To: <053.a3b8532c51843d503590d65da31c99c0@macports.org> References: <053.a3b8532c51843d503590d65da31c99c0@macports.org> Message-ID: <062.e7db2a0e2ca4ba7df1bac29662154f13@macports.org> #15535: New port p5-net-id --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: raimue at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * owner: macports-tickets at lists.macosforge.org => raimue at macports.org * status: new => assigned Comment: Your port has the wrong name in this ticket (-id, should be -ip). This Portfile is for `p5-net-ip` which we already have in our tree. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:40:59 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:40:59 -0000 Subject: [MacPorts] #15536: New Port p5-string-shellquote In-Reply-To: <053.b47a9a2ac3a28f1161d37f825780c439@macports.org> References: <053.b47a9a2ac3a28f1161d37f825780c439@macports.org> Message-ID: <062.1ec235f95516cb32af82fca2752aa1e9@macports.org> #15536: New Port p5-string-shellquote --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: raimue at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: perl, string, shellquote --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * owner: macports-tickets at lists.macosforge.org => raimue at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:41:04 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:41:04 -0000 Subject: [MacPorts] #15537: New port p5-xml-parser-easytree In-Reply-To: <053.9a7ad85c253dc566994a8cc49fa4fcb4@macports.org> References: <053.9a7ad85c253dc566994a8cc49fa4fcb4@macports.org> Message-ID: <062.0b83c71750a088bbff7f48af49179211@macports.org> #15537: New port p5-xml-parser-easytree --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: raimue at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * owner: macports-tickets at lists.macosforge.org => raimue at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:42:10 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:42:10 -0000 Subject: [MacPorts] #15537: New port p5-xml-parser-easytree In-Reply-To: <053.9a7ad85c253dc566994a8cc49fa4fcb4@macports.org> References: <053.9a7ad85c253dc566994a8cc49fa4fcb4@macports.org> Message-ID: <062.ca5353ee0c8bff7ca4ace65e9791030e@macports.org> #15537: New port p5-xml-parser-easytree --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: raimue at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed in r37454. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:42:50 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:42:50 -0000 Subject: [MacPorts] #15536: New Port p5-string-shellquote In-Reply-To: <053.b47a9a2ac3a28f1161d37f825780c439@macports.org> References: <053.b47a9a2ac3a28f1161d37f825780c439@macports.org> Message-ID: <062.cb38ec34efc21863726cf5ecdf8de7a2@macports.org> #15536: New Port p5-string-shellquote --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: raimue at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: perl, string, shellquote --------------------------------+------------------------------------------- Comment (by raimue at macports.org): Committed in r37456. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:44:09 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:44:09 -0000 Subject: [MacPorts] #15534: New port: p5-mail-sender In-Reply-To: <053.da4cf61f347c542d661059c108a9a259@macports.org> References: <053.da4cf61f347c542d661059c108a9a259@macports.org> Message-ID: <062.5d8dbf57ae1d3c8b5a2a44eceec8491a@macports.org> #15534: New port: p5-mail-sender --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: raimue at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: mail, sender, perl --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed in r37457. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 05:48:41 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 12:48:41 -0000 Subject: [MacPorts] #15161: depends_* should have more useful semantics In-Reply-To: <052.8aaf5d09a2eec72f030376f1ee1db84a@macports.org> References: <052.8aaf5d09a2eec72f030376f1ee1db84a@macports.org> Message-ID: <061.1a0537a8497c71447b54387444e9bb68@macports.org> #15161: depends_* should have more useful semantics -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: dependencies -------------------------------+-------------------------------------------- Comment (by jmr at macports.org): Committed the parts of the patch not involving fetch, extract and patch in r37453, and updated the guide accordingly in r37455. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 06:01:29 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 13:01:29 -0000 Subject: [MacPorts] #15547: cannot compile transcode In-Reply-To: <060.f000d4bca59ed34370a93768c220c22a@macports.org> References: <060.f000d4bca59ed34370a93768c220c22a@macports.org> Message-ID: <069.ef1559849e4d3b868011b281fb54cfa1@macports.org> #15547: cannot compile transcode ---------------------------------------+------------------------------------ Reporter: laurent.perron at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------+------------------------------------ Changes (by jmr at macports.org): * cc: cremes at mac.com, liontooth at cogweb.net (added) * milestone: => Port Bugs Comment: Cc maintainers. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 06:02:50 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 13:02:50 -0000 Subject: [MacPorts] #15546: e2fsprogs port bug In-Reply-To: <055.65ad168245ea2eb0d8a226c58f7a3ab4@macports.org> References: <055.65ad168245ea2eb0d8a226c58f7a3ab4@macports.org> Message-ID: <064.4222fbe4512538fde0dc3fbb921ce542@macports.org> #15546: e2fsprogs port bug ----------------------------------+----------------------------------------- Reporter: groolot at groolot.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: e2fsprogs library ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * cc: groolot at groolot.net (removed) * cc: misc at mandriva.org (added) Comment: Cc maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 06:04:39 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 13:04:39 -0000 Subject: [MacPorts] #15548: [Port Abandoned] tokyocabinet In-Reply-To: <054.cddbdcf659c5439846a7cdb692e72dc6@macports.org> References: <054.cddbdcf659c5439846a7cdb692e72dc6@macports.org> Message-ID: <063.2a027f3e9e2866080de136ffe86c7a35@macports.org> #15548: [Port Abandoned] tokyocabinet ---------------------------------+------------------------------------------ Reporter: akira at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: rsky0711 at gmail.com (added) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 06:32:19 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 13:32:19 -0000 Subject: [MacPorts] #15551: Patch updating dnsmasq to 2.42 In-Reply-To: <058.c2cde63a39a4f2ea25b5587291ab1c3d@macports.org> References: <058.c2cde63a39a4f2ea25b5587291ab1c3d@macports.org> Message-ID: <067.43b0606e1f107fbafce6fdbbf3b2f133@macports.org> #15551: Patch updating dnsmasq to 2.42 -------------------------------------+-------------------------------------- Reporter: davidgilman1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: dnsmasq -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * cc: davidgilman1 at gmail.com (removed) * milestone: Port Submissions => Port Updates Comment: See the squid port for an example of how to handle generating a real config file from a sample one only when the former doesn't exist. Also, please remove the trailing whitespace from the long_description (port lint should warn about that). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 06:42:58 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 13:42:58 -0000 Subject: [MacPorts] #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno-long-double In-Reply-To: <054.ba15af79f4ddb3669eddccdd3f4fc33f@macports.org> References: <054.ba15af79f4ddb3669eddccdd3f4fc33f@macports.org> Message-ID: <063.93bde03e5f85bcffe054063df0d1853f@macports.org> #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno- long-double ---------------------------------+------------------------------------------ Reporter: dstndstn at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: dstndstn at gmail.com (removed) * cc: jmr at macports.org (added) Comment: What OS version are you using? You probably need to upgrade to the latest XCode release for your system. On a Tiger machine of mine: {{{ % gcc --version powerpc-apple-darwin8-gcc-4.0.1 (GCC) 4.0.1 (Apple Computer, Inc. build 5370) }}} Also, gcc is being invoked as just 'gcc' rather than '/usr/bin/gcc-4.0', so it looks like you're running an older version of MacPorts, and should upgrade with `sudo port selfupdate`. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 06:56:55 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 13:56:55 -0000 Subject: [MacPorts] #15554: gnome-terminal 2.22.1_0 Incompatible library version In-Reply-To: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> References: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> Message-ID: <063.10c4126b9b05e8f4baacb97d3918629d@macports.org> #15554: gnome-terminal 2.22.1_0 Incompatible library version ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by jmr at macports.org): It was using some libraries installed with X11 instead of the ones provided by MacPorts. This should be fixed by r37458, please confirm. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 06:57:37 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 13:57:37 -0000 Subject: [MacPorts] #15554: gnome-terminal 2.22.1_0 Incompatible library version In-Reply-To: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> References: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> Message-ID: <063.bbfabd979a08501fcd70ce246c674629@macports.org> #15554: gnome-terminal 2.22.1_0 Incompatible library version ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: jmr at macports.org (added) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 07:01:29 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 14:01:29 -0000 Subject: [MacPorts] #15555: py25-numpy 1.0.4 build error In-Reply-To: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> References: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> Message-ID: <066.ac69b73e051637910d6433dc2312058e@macports.org> #15555: py25-numpy 1.0.4 build error ------------------------------------+--------------------------------------- Reporter: janakawicks at gmail.com | Owner: ram at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: py25-numpy ------------------------------------+--------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => ram at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 07:40:58 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 14:40:58 -0000 Subject: [MacPorts] #15500: New port of Perl module String::ShellQuote In-Reply-To: <053.5bb4e354c982eadd085f65831e80356e@macports.org> References: <053.5bb4e354c982eadd085f65831e80356e@macports.org> Message-ID: <062.ad14da93e119b611c17bbb44d45db147@macports.org> #15500: New port of Perl module String::ShellQuote --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: string, shellquote --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #15536. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 07:42:34 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 14:42:34 -0000 Subject: [MacPorts] #15498: Port of Perl Module Mail::Sender In-Reply-To: <053.9f9465973f539e3168ade795df63bd34@macports.org> References: <053.9f9465973f539e3168ade795df63bd34@macports.org> Message-ID: <062.bea2c690cab5b4c8380c0feee5127476@macports.org> #15498: Port of Perl Module Mail::Sender --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: MacPorts base enhancements Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: Mail, sender --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #15534. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 07:44:37 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 14:44:37 -0000 Subject: [MacPorts] #15499: New port of Perl Module Net::IP In-Reply-To: <053.669f0b8e9bb91bf54bcf6fd91b3af4c8@macports.org> References: <053.669f0b8e9bb91bf54bcf6fd91b3af4c8@macports.org> Message-ID: <062.444d5199ace5636595db19329ba1188e@macports.org> #15499: New port of Perl Module Net::IP --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: net, ip --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #15535. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 07:46:17 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 14:46:17 -0000 Subject: [MacPorts] #15501: New port of Perl Module XML::Parser::EasyTree In-Reply-To: <053.4ef9457a098b4598231aa1151bd616d0@macports.org> References: <053.4ef9457a098b4598231aa1151bd616d0@macports.org> Message-ID: <062.1ed41c5392f6cc7315c85f5f11071616@macports.org> #15501: New port of Perl Module XML::Parser::EasyTree --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: xml, parser, easytree --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #15537. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 08:47:29 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 15:47:29 -0000 Subject: [MacPorts] #15555: py25-numpy 1.0.4 build error In-Reply-To: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> References: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> Message-ID: <066.44e050abbc34bc76b13dbd435b2c8b6a@macports.org> #15555: py25-numpy 1.0.4 build error ------------------------------------+--------------------------------------- Reporter: janakawicks at gmail.com | Owner: ram at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: py25-numpy ------------------------------------+--------------------------------------- Changes (by ram at macports.org): * status: new => assigned Comment: Do you get a similar build error with other python25 ports of just py25-numpy? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 09:01:06 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 16:01:06 -0000 Subject: [MacPorts] #14918: sphinx-0.9.8-rc2 Update to latest available version of port In-Reply-To: <052.8f6226dccc6237da97ec1489b016e5a8@macports.org> References: <052.8f6226dccc6237da97ec1489b016e5a8@macports.org> Message-ID: <061.acaf7c51595c5f7d38f41f1d75ebe85b@macports.org> #14918: sphinx-0.9.8-rc2 Update to latest available version of port -------------------------------+-------------------------------------------- Reporter: apsoto at gmail.com | Owner: brett at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: sphinx portfile -------------------------------+-------------------------------------------- Changes (by brett at macports.org): * status: new => closed * resolution: => wontfix Comment: 0.9.7 is the last stable release at this point in time. 0.9.8rc2 is a release candidate for the next stable release. If someone would like to maintain a sphinx-devel port, that would be the appropriate place to track those pre-release versions. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 09:42:27 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 16:42:27 -0000 Subject: [MacPorts] #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno-long-double In-Reply-To: <054.ba15af79f4ddb3669eddccdd3f4fc33f@macports.org> References: <054.ba15af79f4ddb3669eddccdd3f4fc33f@macports.org> Message-ID: <063.2cddc8cb44c27bbec92d6b9619ce09ac@macports.org> #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno- long-double ---------------------------------+------------------------------------------ Reporter: dstndstn at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by dstndstn at gmail.com): Sorry, I should have specified my OS and MacPorts versions: {{{ # uname -a Darwin shiny.local 7.9.0 Darwin Kernel Version 7.9.0: Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC Power Macintosh powerpc # port selfupdate MacPorts base version 1.600 installed Downloaded MacPorts base version 1.600 The MacPorts installation is not outdated and so was not updated selfupdate done! }}} It's a 10.3.9 system. (I normally run Linux on this machine so I haven't bought OSX updates.) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 09:50:09 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 16:50:09 -0000 Subject: [MacPorts] #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno-long-double In-Reply-To: <054.ba15af79f4ddb3669eddccdd3f4fc33f@macports.org> References: <054.ba15af79f4ddb3669eddccdd3f4fc33f@macports.org> Message-ID: <063.b53e4fd1436d45a8fe076cf16f5edcc1@macports.org> #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno- long-double ---------------------------------+------------------------------------------ Reporter: dstndstn at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by dstndstn at gmail.com): PS, I have XCode 1.5, which I believe is the latest version supported under OSX 10.3. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 10:04:26 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 17:04:26 -0000 Subject: [MacPorts] #15556: cairo 1.6.4 build fails on panther os x 10.3.9 Message-ID: <050.c94ef41e0752b39919ff8bbc346f9caa@macports.org> #15556: cairo 1.6.4 build fails on panther os x 10.3.9 ------------------------------+--------------------------------------------- Reporter: north at znet.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: cairo 1.6.4 fail | ------------------------------+--------------------------------------------- Quite a few other packages built well, so the environment seems okay. Here's the relevant spew: /usr/bin/gcc-3.3 -DHAVE_CONFIG_H -I. -I.. -I/opt/local/include -I. -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include -I/opt/local/include/libpng12 -DXTHREADS -I/opt/local/include -I/usr/X11R6/include -I/usr/X11R6/include -I/opt/local/include/pixman-1 -Wall -Wsign-compare -Werror-implicit-function-declaration -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing- declarations -Wnested-externs -Wpacked -Wswitch-enum -Wmissing-format- attribute -Wno-unused-parameter -Wno-long-long -Winline -fno-strict- aliasing -O2 -MT libcairo_la-cairo-quartz-surface.lo -MD -MP -MF .deps /libcairo_la-cairo-quartz-surface.Tpo -c cairo-quartz-surface.c -fno- common -DPIC -o .libs/libcairo_la-cairo-quartz-surface.o In file included from cairo-quartz-surface.c:39: cairo-quartz-private.h:92: error: parse error before "CGDataProviderReleaseDataCallback" cairo-quartz-private.h:93: warning: function declaration isn't a prototype cairo-quartz-surface.c: In function `_cairo_quartz_fixup_unbounded_operation': cairo-quartz-surface.c:508: error: implicit declaration of function `CGContextClipToMask' cairo-quartz-surface.c: In function `_cairo_surface_to_cgimage': cairo-quartz-surface.c:749: error: implicit declaration of function `CGImageCreateCopy' cairo-quartz-surface.c:749: warning: assignment makes pointer from integer without a cast cairo-quartz-surface.c: In function `_cairo_quartz_setup_fallback_source': cairo-quartz-surface.c:940: error: implicit declaration of function `CGRectApplyAffineTransform' cairo-quartz-surface.c:940: error: incompatible types in assignment cairo-quartz-surface.c: In function `_cairo_quartz_setup_source': cairo-quartz-surface.c:1168: error: incompatible types in assignment cairo-quartz-surface.c:1184: error: incompatible types in assignment make[2]: *** [libcairo_la-cairo-quartz-surface.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 10:42:36 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 17:42:36 -0000 Subject: [MacPorts] #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno-long-double In-Reply-To: <054.ba15af79f4ddb3669eddccdd3f4fc33f@macports.org> References: <054.ba15af79f4ddb3669eddccdd3f4fc33f@macports.org> Message-ID: <063.4d5685b740b35838a19b0ecbb686a1ae@macports.org> #15553: py25-numeric build error: unrecognized gcc flags -no-cpp-precomp and -Wno- long-double ---------------------------------+------------------------------------------ Reporter: dstndstn at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by jmr at macports.org): I don't have a Panther machine to test on, but here's a patch to try. It will install and use GCC 4.0.4 from MacPorts. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 10:47:21 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 17:47:21 -0000 Subject: [MacPorts] #15556: cairo 1.6.4 build fails on panther os x 10.3.9 In-Reply-To: <050.c94ef41e0752b39919ff8bbc346f9caa@macports.org> References: <050.c94ef41e0752b39919ff8bbc346f9caa@macports.org> Message-ID: <059.fb8695ce48bbf4354e05e78f66e14a9e@macports.org> #15556: cairo 1.6.4 build fails on panther os x 10.3.9 -----------------------------+---------------------------------------------- Reporter: north at znet.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: cairo 1.6.4 fail -----------------------------+---------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => ryandesign at macports.org * milestone: => Port Bugs Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 11:01:58 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 18:01:58 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.b3c35d229f9e1b64dacf5f2e3c8feb02@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by mike at it-loops.com): Replying to [comment:18 ryandesign at macports.org]: > I believe I fixed #15209. Please follow instructions there and let me know if that fixes this issue as well. I can confirm, that the patch in #15209 fixes the problem I reported earlier. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 11:31:46 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 18:31:46 -0000 Subject: [MacPorts] #15551: Patch updating dnsmasq to 2.42 In-Reply-To: <058.c2cde63a39a4f2ea25b5587291ab1c3d@macports.org> References: <058.c2cde63a39a4f2ea25b5587291ab1c3d@macports.org> Message-ID: <067.d18e5de8640b40e9493e10479c23608e@macports.org> #15551: Patch updating dnsmasq to 2.42 -------------------------------------+-------------------------------------- Reporter: davidgilman1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: dnsmasq -------------------------------------+-------------------------------------- Comment (by davidgilman1+macports at gmail.com): Ok, updated the portfile with the post-activate stuff for the config file. The default configuration for dnsmasq is to read and poll /etc/resolv.conf for nameservers. MacOS X updates this file by itself. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 12:18:36 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 19:18:36 -0000 Subject: [MacPorts] #15539: libtorrent build failure In-Reply-To: <054.6fbfdd32fda03ae6dd56a0c6deb8f79b@macports.org> References: <054.6fbfdd32fda03ae6dd56a0c6deb8f79b@macports.org> Message-ID: <063.e3b2cb7952471448ffdd9721b20503dc@macports.org> #15539: libtorrent build failure ---------------------------------+------------------------------------------ Reporter: quimbley at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by gardnermj at gmail.com): See #14447. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 15:07:41 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 22:07:41 -0000 Subject: [MacPorts] #15557: Enhancement Request: Add svg2pdf to MacPorts Message-ID: <059.c101aca8342203282e662d2a02f6fe22@macports.org> #15557: Enhancement Request: Add svg2pdf to MacPorts -------------------------------------+-------------------------------------- Reporter: andrejohn.mas at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- svg2pdf is a tool to convert SVG files to PDF. A link can be found here: http://www.freshports.org/graphics/svg2pdf It depends on Cairo graphics: http://www.freshports.org/graphics/libsvg-cairo/ This is an enhancement request to see if this tool could be added to MacPorts. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 15:48:37 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 22:48:37 -0000 Subject: [MacPorts] #15558: Provide quartz-only variant of cairo port Message-ID: <053.7dac91540fd2bde586d5852ccd3cd4a9@macports.org> #15558: Provide quartz-only variant of cairo port -------------------------------+-------------------------------------------- Reporter: macports at flyn.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- The cairo port currently provides three variants: universal, which builds all of cairo's backends (e.g., freetype and quartz on Mac OS X); glitz, which (in addition) enables glitz and no_x11, which disables X11 functionality. I would like to see a pure quartz variant. It is desirable to have only one font subsystem (quartz). This is not yet generally feasible because many applications do not support the quartz back-end. However, a pure quartz variant would allow developers to easily build an environment from which they could continue to port applications to support the quartz back- end. Broken, for lack of a better word, applications would immediately reveal themselves as they would not build and/or execute. If a user is only interested in a subset of applications that do support the quartz back-end, then he may install them without many unnecessary dependencies. Of course, the universal build should remain the default for quite some time (if not forever). This was discussed in ticket #15052. I opened a separate ticket so that it may be tracked. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 16:32:08 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 23:32:08 -0000 Subject: [MacPorts] #15559: gtk2 error for missing ${prefix}/include/cairo/cairo-quartz.h incorrect Message-ID: <053.a9e3ff96b90da31ead076c6014122dba@macports.org> #15559: gtk2 error for missing ${prefix}/include/cairo/cairo-quartz.h incorrect -------------------------------+-------------------------------------------- Reporter: macports at flyn.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- GTK2's Portfile says, "Please uninstall or deactivate the cairo port and reinstall it by running `port install cairo +quartz`" This is not correct. The cairo universal variant builds the quartz code. The cairo port does not have a quartz variant any longer. See also ticket #15558. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 16:40:18 2008 From: noreply at macports.org (MacPorts) Date: Sun, 08 Jun 2008 23:40:18 -0000 Subject: [MacPorts] #15560: Patch gnumeric to integrate into Mac OS X menu Message-ID: <053.6050036523049322dc32720d33eeaca1@macports.org> #15560: Patch gnumeric to integrate into Mac OS X menu -------------------------------+-------------------------------------------- Reporter: macports at flyn.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- Some GTK2 applications have begun integrating into the Mac OS X menu bar when built against the Quartz back-end. Inkscape is an application that does this. This requires a slight source code change to the application. The folks at Imendio have written a library that helps a developer perform this integration. See http://developer.imendio.com/projects/gtk- macosx/integration. I have attached a patch against gnumeric to the GNOME bug at http://bugzilla.gnome.org/show_bug.cgi?id=477381. This patch could be applied by gnumeric's Portfile until a solution is accepted upstream. Either the ige-mac-integration library could be packaged as a port or ige- mac-menu.c and ige-mac-menu.h could be patched into gnumeric's source tree. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 17:51:07 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 00:51:07 -0000 Subject: [MacPorts] #15561: pan2 @0.132_0 install missing language dictionary Message-ID: <057.e1240873f02924e679640b982069391e@macports.org> #15561: pan2 @0.132_0 install missing language dictionary ----------------------------------------+----------------------------------- Reporter: jpwiegand at optimum.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Keywords: pan2 language dictionaries | ----------------------------------------+----------------------------------- What language dictionaries does the below installation message refer to? What else do i need to make Pan2 work? DURING PAN2 INSTALLATION: ---> Staging aspell into destroot ---> Installing aspell 0.60.6_0+macosx ****************************************************************** You must install (at least) one of the language dictionaries after installing this port in order for it to work. ****************************************************************** ---> Activating aspell 0.60.6_0+macosx ---> Cleaning aspell ---> Fetching gtkspell2 PORTS INSTALLED: ibook:~ SilverTuna$ port installed The following ports are currently installed: aspell @0.60.6_0+macosx (active) atk @1.22.0_1 (active) cairo @1.6.4_1+macosx (active) expat @2.0.1_0 (active) fontconfig @2.6.0_0+macosx (active) freetype @2.3.5_1 (active) gettext @0.17_3 (active) glib2 @2.16.3_0 (active) gmime @2.2.18_0 (active) gperf @3.0.3_0 (active) gtk2 @2.12.9_0+x11 (active) gtkspell2 @2.0.11_0 (active) jpeg @6b_2 (active) libiconv @1.12_0+darwin_8 (active) libpixman @0.10.0_0 (active) libpng @1.2.29_0 (active) libxml2 @2.6.32_0 (active) ncurses @5.6_0 (active) ncursesw @5.6_1 (active) p5-xml-parser @2.36_0 (active) pan2 @0.132_0 (active) pango @1.20.3_0 (active) pcre @7.7_0 (active) perl5.8 @5.8.8_2+darwin_8 (active) pkgconfig @0.23_0 (active) render @0.9_1 (active) shared-mime-info @0.23_2 (active) texinfo @4.11_0 (active) tiff @3.8.2_2+macosx (active) Xft2 @2.1.12_0 (active) xorg-util-macros @1.1.5_0 (active) xorg-xproto @7.0.11_1 (active) xrender @0.9.0_2 (active) zlib @1.2.3_1 (active) ibook:~ SilverTuna$ IN BASH: ibook:~ SilverTuna$ pan (pan:16240): Gtk-WARNING **: cannot open display: :0 ibook:~ SilverTuna$ -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 18:43:41 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 01:43:41 -0000 Subject: [MacPorts] #15555: py25-numpy 1.0.4 build error In-Reply-To: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> References: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> Message-ID: <066.b9cc770ed9ccdebce6284fe8b1d7be3d@macports.org> #15555: py25-numpy 1.0.4 build error ------------------------------------+--------------------------------------- Reporter: janakawicks at gmail.com | Owner: ram at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: py25-numpy ------------------------------------+--------------------------------------- Comment (by janakawicks at gmail.com): only for py25-numpy {{{ janaka$ port installed |grep 'py' py-twisted @2.5.0_0 (active) py-zopeinterface @3.3.0_0 (active) py25-bsddb @2.5.2_0 (active) py25-gobject @2.14.1_0 (active) py25-hashlib @2.5.2_0 (active) py25-orbit @2.14.3_1 (active) py25-zlib @2.5.2_0 (active) python24 @2.4.5_0+darwin_8 (active) python25 @2.5.2_2+darwin_8 (active) }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 18:51:30 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 01:51:30 -0000 Subject: [MacPorts] #15555: py25-numpy 1.0.4 build error In-Reply-To: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> References: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> Message-ID: <066.f5f0f7975786ca44a547381edef8512e@macports.org> #15555: py25-numpy 1.0.4 build error ------------------------------------+--------------------------------------- Reporter: janakawicks at gmail.com | Owner: ram at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: py25-numpy ------------------------------------+--------------------------------------- Comment (by ram at macports.org): I've just updated to port to 1.1.0, wait around 8 hours (for the next PortIndex run) run a selfupdate and try building again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 19:19:42 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 02:19:42 -0000 Subject: [MacPorts] #15557: Port Request: svg2pdf In-Reply-To: <059.c101aca8342203282e662d2a02f6fe22@macports.org> References: <059.c101aca8342203282e662d2a02f6fe22@macports.org> Message-ID: <068.e5302d960b443f909ea5636ad1980f19@macports.org> #15557: Port Request: svg2pdf --------------------------------------+------------------------------------- Reporter: andrejohn.mas at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by jmr at macports.org): * cc: andrejohn.mas at gmail.com (removed) * summary: Enhancement Request: Add svg2pdf to MacPorts => Port Request: svg2pdf * milestone: => Port Requests -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 19:20:22 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 02:20:22 -0000 Subject: [MacPorts] #15558: Provide quartz-only variant of cairo port In-Reply-To: <053.7dac91540fd2bde586d5852ccd3cd4a9@macports.org> References: <053.7dac91540fd2bde586d5852ccd3cd4a9@macports.org> Message-ID: <062.13fb4f61a067ee4e2c96e6cb9f7717b2@macports.org> #15558: Provide quartz-only variant of cairo port --------------------------------+------------------------------------------- Reporter: macports at flyn.org | Owner: ryandesign at macports.org Type: enhancement | Status: new Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => ryandesign at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 19:20:56 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 02:20:56 -0000 Subject: [MacPorts] #15559: gtk2 error for missing ${prefix}/include/cairo/cairo-quartz.h incorrect In-Reply-To: <053.a9e3ff96b90da31ead076c6014122dba@macports.org> References: <053.a9e3ff96b90da31ead076c6014122dba@macports.org> Message-ID: <062.e0cfd0aaf6321b6d4b8d68457ecc4751@macports.org> #15559: gtk2 error for missing ${prefix}/include/cairo/cairo-quartz.h incorrect --------------------------------+------------------------------------------- Reporter: macports at flyn.org | Owner: nox at macports.org Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => nox at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 19:24:46 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 02:24:46 -0000 Subject: [MacPorts] #15561: pan2 @0.132_0 install missing language dictionary In-Reply-To: <057.e1240873f02924e679640b982069391e@macports.org> References: <057.e1240873f02924e679640b982069391e@macports.org> Message-ID: <066.9f5dde8dd868cc55a7fc76ef4f0a8b62@macports.org> #15561: pan2 @0.132_0 install missing language dictionary ------------------------------------+--------------------------------------- Reporter: jpwiegand at optimum.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: invalid | Keywords: pan2 language dictionaries ------------------------------------+--------------------------------------- Changes (by jmr at macports.org): * cc: jpwiegand at optimum.net (removed) * status: new => closed * resolution: => invalid * milestone: Port Requests => Port Bugs Comment: The message came from aspell, not pan2. It is telling you that you need to install a language dictionary like aspell-dict-de, aspell-dict-en, etc. before you can use aspell to check spelling. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 20:00:21 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 03:00:21 -0000 Subject: [MacPorts] #15562: grc-1.1 Message-ID: <056.e0f747ca9692fd809ee9c666798bafee@macports.org> #15562: grc-1.1 ----------------------------------+----------------------------------------- Reporter: aecollins1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | ----------------------------------+----------------------------------------- grc-1.1 Generic Colouriser 1.1 Description: Generic Colouriser provides colourised output of logfiles and commands. It provides the grc and grcat Python scripts for filtering text output and colourising it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 20:43:58 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 03:43:58 -0000 Subject: [MacPorts] #15209: cairo+quartz broken: cairo-quartz-font pkgconfig pc file is not installed In-Reply-To: <063.e4572145e657a09e2aa70511eaeddebc@macports.org> References: <063.e4572145e657a09e2aa70511eaeddebc@macports.org> Message-ID: <072.e428fba474e86d3923392893dafe2fa4@macports.org> #15209: cairo+quartz broken: cairo-quartz-font pkgconfig pc file is not installed ------------------------------------------+--------------------------------- Reporter: shreevatsa.public at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ------------------------------------------+--------------------------------- Comment (by ryandesign at macports.org): This problem has been [http://lists.cairographics.org/archives/cairo/2008-June/014300.html fixed upstream] already so with the next release, our workaround should no longer be necessary. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 20:53:06 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 03:53:06 -0000 Subject: [MacPorts] #15563: Update Groovy port to groovy 1.5.6 Message-ID: <054.adfac3f323d1e314c00e1c1977f6c9dc@macports.org> #15563: Update Groovy port to groovy 1.5.6 ------------------------------------+--------------------------------------- Reporter: tomaslin at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: groovy 1.5.6 java lang | ------------------------------------+--------------------------------------- Current groovy portFile needs to be updated to the latest version of Groovy, which is 1.5.6 The portFile to do so has been attached -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 21:01:29 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 04:01:29 -0000 Subject: [MacPorts] #15052: pango: Font display problems when compiled against cairo 1.6.4 In-Reply-To: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> References: <053.1b3a4e7c7422fb55e315c6051c8b3447@macports.org> Message-ID: <062.9830b28cbd453038469012e32d5af0dd@macports.org> #15052: pango: Font display problems when compiled against cairo 1.6.4 --------------------------------+------------------------------------------- Reporter: mike at it-loops.com | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: fixed | Keywords: --------------------------------+------------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 8 22:57:51 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 05:57:51 -0000 Subject: [MacPorts] #15564: MacPorts DB has outdated maintainer information Message-ID: <059.f55d4c3284b2102e3b0f84bb684b6944@macports.org> #15564: MacPorts DB has outdated maintainer information -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: jmpp at macports.org Type: defect | Status: new Priority: Normal | Milestone: Website & Documentation Component: website | Version: Keywords: | -------------------------------------+-------------------------------------- The MacPorts DB doesn't seem to be updating ports' maintainers properly. For example, the [http://db.macports.org/port/show/1604 MacPorts DB page for the q port] shows it has no maintainer, but I am its maintainer since r32081. The pages for [http://db.macports.org/port/show/1871 curl] and [http://db.macports.org/port/show/2120 wget] show they're maintained by yeled, but I took them over in r28530. The version information in the Port Packages section of those pages is being updated with new information. But for some reason the maintainer information isn't. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 00:13:43 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 07:13:43 -0000 Subject: [MacPorts] #15565: rsync server not updating Message-ID: <059.b7e48a9297e4496f6d2592d10b1e97e6@macports.org> #15565: rsync server not updating -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: wsiegrist at apple.com Type: defect | Status: new Priority: Normal | Milestone: Component: server/hosting | Version: Keywords: | -------------------------------------+-------------------------------------- A user reported to me that a recent change to the q port hasn't shown up on the rsync server. I checked, and the rsync server seems to have files only up to 2008-06-08 04:23:03 (central time). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 00:24:09 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 07:24:09 -0000 Subject: [MacPorts] #15566: gcc43: build failure on Mac OS X 10.3.9 Panther Message-ID: <059.117351f13b0b183a8863c2fcc81000e1@macports.org> #15566: gcc43: build failure on Mac OS X 10.3.9 Panther -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- I'm unable to install gcc43 on Mac OS X 10.3.9 Panther, with Xcode 1.5, on a 466-MHz Power Mac G4: {{{ $ port install gcc43 ---> Fetching mpfr ---> Verifying checksum(s) for mpfr ---> Extracting mpfr ---> Configuring mpfr ---> Building mpfr with target all ---> Staging mpfr into destroot ---> Installing mpfr @2.3.1_0 ---> Activating mpfr @2.3.1_0 ---> Cleaning mpfr ---> Fetching gcc43 ---> Verifying checksum(s) for gcc43 ---> Extracting gcc43 ---> Configuring gcc43 ---> Building gcc43 with target all Error: Target org.macports.build returned: shell command " cd "/mp/var/macports/build/_Volumes_data_macports_ports_lang_gcc43/work/build" && nice -n 2 make all " returned error 2 Command output: checking whether fread_unlocked is declared... no checking whether fwrite_unlocked is declared... no checking whether getchar_unlocked is declared... yes checking whether getc_unlocked is declared... yes checking whether putchar_unlocked is declared... yes checking whether putc_unlocked is declared... yes checking whether vasprintf is declared... yes checking for working alloca.h... yes checking for alloca... yes checking for ANSI C header files... (cached) yes checking for nl_langinfo and CODESET... yes checking whether NLS is requested... no checking for uchar... checking for ld used by GCC... ld checking if the linker (ld) is GNU ld... no checking for shared library run path origin... done checking for iconv... yes checking how to link with libiconv... -liconv checking for iconv declaration... extern size_t iconv (iconv_t cd, const char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); updating cache ./config.cache configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depdir commands mkdir -p -- .deps Makefile:191: *** Insufficient number of arguments (2) to function `patsubst'. Stop. make[2]: *** [all-stage1-libcpp] Error 2 make[1]: *** [stage1-bubble] Error 2 make: *** [all] Error 2 Error: Status 1 encountered during processing. $ }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 00:28:48 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 07:28:48 -0000 Subject: [MacPorts] #15566: gcc43: build failure on Mac OS X 10.3.9 Panther In-Reply-To: <059.117351f13b0b183a8863c2fcc81000e1@macports.org> References: <059.117351f13b0b183a8863c2fcc81000e1@macports.org> Message-ID: <068.923a513c4b8389c27c2fe9ca357261ae@macports.org> #15566: gcc43: build failure on Mac OS X 10.3.9 Panther --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): It looks like the same problem was [http://lists.macosforge.org/pipermail /macports-users/2007-June/004109.html reported against gcc42] a year ago, and the suggestion was to use gmake on Mac OS X 10.3.9. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 00:30:41 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 07:30:41 -0000 Subject: [MacPorts] #15565: rsync server not updating In-Reply-To: <059.b7e48a9297e4496f6d2592d10b1e97e6@macports.org> References: <059.b7e48a9297e4496f6d2592d10b1e97e6@macports.org> Message-ID: <068.b08c2c4845b397fa8258765efa0d7f6f@macports.org> #15565: rsync server not updating --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: wsiegrist at apple.com Type: defect | Status: closed Priority: Normal | Milestone: Component: server/hosting | Version: Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by wsiegrist at apple.com): * status: new => closed * resolution: => fixed Comment: Fixed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 00:43:32 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 07:43:32 -0000 Subject: [MacPorts] #15567: gcc43 update to 4.3.1 Message-ID: <052.34cc8f22177042fcd32ee91de5b44a16@macports.org> #15567: gcc43 update to 4.3.1 ------------------------------+--------------------------------------------- Reporter: blb at macports.org | Owner: mww at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: gcc43 update | ------------------------------+--------------------------------------------- Will attach a diff to update the lang/gcc43 port to version 4.3.1. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 01:00:22 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 08:00:22 -0000 Subject: [MacPorts] #15556: cairo 1.6.4 build fails on panther os x 10.3.9 In-Reply-To: <050.c94ef41e0752b39919ff8bbc346f9caa@macports.org> References: <050.c94ef41e0752b39919ff8bbc346f9caa@macports.org> Message-ID: <059.ef759d69634cd8e18016b793f1963d5b@macports.org> #15556: cairo 1.6.4 build fails on panther os x 10.3.9 -----------------------------+---------------------------------------------- Reporter: north at znet.com | Owner: ryandesign at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: cairo 1.6.4 fail -----------------------------+---------------------------------------------- Changes (by ryandesign at macports.org): * status: new => assigned Comment: Confirmed. I've [http://lists.cairographics.org/archives/cairo/2008-June/014302.html asked the cairo mailing] list about this. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 01:13:20 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 08:13:20 -0000 Subject: [MacPorts] #15517: pango error install; No such file or directory In-Reply-To: <058.b07bc7aaaa63d922e42bf343f9806a34@macports.org> References: <058.b07bc7aaaa63d922e42bf343f9806a34@macports.org> Message-ID: <067.7f228851906a951a6dfe3000019f97f8@macports.org> #15517: pango error install; No such file or directory -------------------------------------+-------------------------------------- Reporter: esben_kaufmann at msn.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: pango -------------------------------------+-------------------------------------- Comment (by esben_kaufmann at msn.com): Thx that seemed to be the answer :-) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 01:16:52 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 08:16:52 -0000 Subject: [MacPorts] #15207: gtk28 build failure on osx 10.5.2 - gtkiconfactory.c:2943: error: conflicting types for 'g_hash_table_get_keys' In-Reply-To: <051.3a5593376780701d13adc38f4e3cc186@macports.org> References: <051.3a5593376780701d13adc38f4e3cc186@macports.org> Message-ID: <060.1ac98026f799fc08c0879c239ad3edb9@macports.org> #15207: gtk28 build failure on osx 10.5.2 - gtkiconfactory.c:2943: error: conflicting types for 'g_hash_table_get_keys' ------------------------------+--------------------------------------------- Reporter: pieter at meul.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gtk28 ------------------------------+--------------------------------------------- Comment (by rhwood at macports.org): Is there a reason to use gtk28 and not gtk2, which is more current? AFAIK gtk28 was split from gtk2 when there were some problems in gtk 2.10 for some users. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 02:36:41 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 09:36:41 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.0bdb57f6f22baed2ed6575370fae4930@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: ram at macports.org Type: enhancement | Status: reopened Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by milosh at macports.org): Replying to [comment:6 raimue at macports.org]: > Replying to [comment:1 milosh at macports.org]: > > Making it depend on python_select would be a good idea however. > > As python_select can't depend on any specific version of python, this won't work. As rubber works very well with Apple's python, it does work. I've made the change in r37471. > Until we get a better dependency engine, my advice would be to add variants for each python version (+python24, +python25 etc.). This should be done by python_select, not by rubber or any other port that does not install as a python package. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 04:47:24 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 11:47:24 -0000 Subject: [MacPorts] #15555: py25-numpy 1.0.4 build error In-Reply-To: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> References: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> Message-ID: <066.824c2a2ee4b21f94657e7ed345ca6a8d@macports.org> #15555: py25-numpy 1.0.4 build error ------------------------------------+--------------------------------------- Reporter: janakawicks at gmail.com | Owner: ram at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: py25-numpy ------------------------------------+--------------------------------------- Comment (by janakawicks at gmail.com): Hi Sir, I couldn't wait for 8hrs, so I pulled it from the svn :-) .. It looks like an issue with my python2.5.. for python2.4 it works just fine.. {{{ janaka$ port installed |grep 'numpy' py-numpy @1.1.0_0 (active) }}} When I try manually with 'python2.5 -v' it gets hang at {{{ dlopen("/opt/local/lib/python2.5/lib-dynload/_random.so", 2); import _random # dynamically loaded from /opt/local/lib/python2.5/lib- dynload/_random.so }}} then I get a segfault and a nasty Crash Report.. btw, my system is PPC 10.4.11 (Build 8S165) with XCODE 2.5 Cheers, Janaka -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 05:54:34 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 12:54:34 -0000 Subject: [MacPorts] #15555: py25-numpy 1.0.4 build error In-Reply-To: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> References: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> Message-ID: <066.e131eff7090a5669692df1d836d60e3a@macports.org> #15555: py25-numpy 1.0.4 build error ------------------------------------+--------------------------------------- Reporter: janakawicks at gmail.com | Owner: ram at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: py25-numpy ------------------------------------+--------------------------------------- Comment (by janakawicks at gmail.com): Great.. I did a re-installation of python 2.5 .. and everything works fine.. Thank you for updating with the new version.. :-) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 06:11:05 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 13:11:05 -0000 Subject: [MacPorts] #15555: py25-numpy 1.0.4 build error In-Reply-To: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> References: <057.9502147f26e92f0c98d0de5dda2fc88b@macports.org> Message-ID: <066.c2faf9e66e40571b9a188db30b227127@macports.org> #15555: py25-numpy 1.0.4 build error ------------------------------------+--------------------------------------- Reporter: janakawicks at gmail.com | Owner: ram at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: py25-numpy ------------------------------------+--------------------------------------- Changes (by ram at macports.org): * status: assigned => closed * resolution: => worksforme Comment: Great -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 06:12:14 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 13:12:14 -0000 Subject: [MacPorts] #15564: MacPorts DB has outdated maintainer information In-Reply-To: <059.f55d4c3284b2102e3b0f84bb684b6944@macports.org> References: <059.f55d4c3284b2102e3b0f84bb684b6944@macports.org> Message-ID: <068.cedeef395665567edd48de1847e4bd9f@macports.org> #15564: MacPorts DB has outdated maintainer information --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: jmpp at macports.org Type: defect | Status: new Priority: Normal | Milestone: Website & Documentation Component: website | Version: Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by raimue at macports.org): * cc: jberry at macports.org (added) Comment: Adding jberry to CC as he is more familiar with MPWA. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 06:45:43 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 13:45:43 -0000 Subject: [MacPorts] #15517: pango error install; No such file or directory In-Reply-To: <058.b07bc7aaaa63d922e42bf343f9806a34@macports.org> References: <058.b07bc7aaaa63d922e42bf343f9806a34@macports.org> Message-ID: <067.d1a30d7b025ac0083f7b18902b580e35@macports.org> #15517: pango error install; No such file or directory -------------------------------------+-------------------------------------- Reporter: esben_kaufmann at msn.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: invalid | Keywords: pango -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => invalid -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 06:53:31 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 13:53:31 -0000 Subject: [MacPorts] #13418: update request: groovy 1.5 In-Reply-To: <054.5332548bb262601da548705bb81e8de1@macports.org> References: <054.5332548bb262601da548705bb81e8de1@macports.org> Message-ID: <063.47d22780807d4840d71eb8fae37a5c1f@macports.org> #13418: update request: groovy 1.5 ---------------------------------+------------------------------------------ Reporter: brennan at sapelo.org | Owner: jberry at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.5.2 Resolution: duplicate | Keywords: java lang groovy ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Superseded by #15563. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 06:54:11 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 13:54:11 -0000 Subject: [MacPorts] #15563: Update Groovy port to groovy 1.5.6 In-Reply-To: <054.adfac3f323d1e314c00e1c1977f6c9dc@macports.org> References: <054.adfac3f323d1e314c00e1c1977f6c9dc@macports.org> Message-ID: <063.139b3a66eae7eb1f2cfb05419682b8cf@macports.org> #15563: Update Groovy port to groovy 1.5.6 ---------------------------------+------------------------------------------ Reporter: tomaslin at gmail.com | Owner: jberry at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: groovy 1.5.6 java lang ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: jberry at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => jberry at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 06:54:42 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 13:54:42 -0000 Subject: [MacPorts] #15563: Update Groovy port to groovy 1.5.6 In-Reply-To: <054.adfac3f323d1e314c00e1c1977f6c9dc@macports.org> References: <054.adfac3f323d1e314c00e1c1977f6c9dc@macports.org> Message-ID: <063.ae87b39ae609cd247c8d824837fab7ec@macports.org> #15563: Update Groovy port to groovy 1.5.6 ---------------------------------+------------------------------------------ Reporter: tomaslin at gmail.com | Owner: jberry at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: groovy 1.5.6 java lang ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * type: defect => enhancement * milestone: Port Bugs => Port Updates -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 08:02:20 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 15:02:20 -0000 Subject: [MacPorts] #15542: webkit-gtk should depend on gst-plugins-base In-Reply-To: <055.45d2208745381bebcaf08dae6ecf15c7@macports.org> References: <055.45d2208745381bebcaf08dae6ecf15c7@macports.org> Message-ID: <064.ab6fe80f56c01ef146c3faf2d2f94357@macports.org> #15542: webkit-gtk should depend on gst-plugins-base ----------------------------------+----------------------------------------- Reporter: eekee57 at fastmail.fm | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ----------------------------------+----------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => fixed Comment: Fixed in r37476. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 08:38:15 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 15:38:15 -0000 Subject: [MacPorts] #15568: New port: py25-macholib-devel to go with py25-py2app-devel Message-ID: <057.a0a0220e2e83aece59d09b0c7757db72@macports.org> #15568: New port: py25-macholib-devel to go with py25-py2app-devel -----------------------------------+---------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.7.0 Keywords: | -----------------------------------+---------------------------------------- In packaging an application I needed to use a more recent version of macholib than is provided by py25-macholib. Here is py25-macholib-devel, which pulls from a Subversion server, just like py25-py2app-devel does. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 08:54:25 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 15:54:25 -0000 Subject: [MacPorts] #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries Message-ID: <057.7fcc3c931c496e6418828ef25649d574@macports.org> #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries -----------------------------------+---------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Keywords: | -----------------------------------+---------------------------------------- I have a MacPorts installation configured, in part, with {{{--with-x11-prefix=/Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6}}}. I distribute binaries that are meant to run on both 10.4 and 10.5 so they must be linked against the 10.4 libraries. I had to modify the portfiles for cairo, gtk2, pango, and xrender to make them link properly. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 09:01:55 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 16:01:55 -0000 Subject: [MacPorts] #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries In-Reply-To: <057.7fcc3c931c496e6418828ef25649d574@macports.org> References: <057.7fcc3c931c496e6418828ef25649d574@macports.org> Message-ID: <066.677154b9e30158d0178c1169943ae24e@macports.org> #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries ------------------------------------+--------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Changes (by raimue at macports.org): * cc: nox at macports.org, ryandesign at macports.org (added) Comment: CC'ing maintainers of cairo, pango and gtk2. xrender does not have a maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 09:33:20 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 16:33:20 -0000 Subject: [MacPorts] #14707: Port Request: kmymoney2 0.8.8 In-Reply-To: <053.e51822307b118b38c522da100bc3dc28@macports.org> References: <053.e51822307b118b38c522da100bc3dc28@macports.org> Message-ID: <062.e9a1482388c3065c8597f610d6b6979e@macports.org> #14707: Port Request: kmymoney2 0.8.8 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: | Keywords: kmymoney --------------------------------+------------------------------------------- Comment (by ddimes at rogers.com): Please ignore this request. I have already created my own port file to build and install kmymoney 0.8.9. I will be submitting the port file shortly. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 10:34:27 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 17:34:27 -0000 Subject: [MacPorts] #15570: Use ${universal.configure_*} in cairo and openssl Message-ID: <057.15e9a5bf63e48d150328d055fb145501@macports.org> #15570: Use ${universal.configure_*} in cairo and openssl -----------------------------------+---------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Keywords: | -----------------------------------+---------------------------------------- This is a patch to cause cairo and openssl to use {{{${universal.configure_cflags}}}} and {{{${universal.configure_ldflags}}}} (and {{{${universal.configure_cppflags}}} and {{{${universal.configure_args}}} in the case of cairo). This is necessary to get important flags like {{{-isysroot /Developer/SDKs/MacOSX10.4u.sdk}}} and {{{-mmacosx-version- min=10.4}}} considered. This is normally done by the default universal variant in Autoconf-using ports, but openssl doesn't use Autoconf and cairo declares its own universal variant. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 10:34:42 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 17:34:42 -0000 Subject: [MacPorts] #15554: gnome-terminal 2.22.1_0 Incompatible library version In-Reply-To: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> References: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> Message-ID: <063.3431111c746a215fbc850fec6ff64405@macports.org> #15554: gnome-terminal 2.22.1_0 Incompatible library version ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by zweistein12 at gmx.de): I have sudo port sync; sudo port upgrade gnome-terminal, but gnome- terminal is not starting. I have played with port and found that two versions of libpng are installed. Does that help you? {{{ $ sudo port installed|grep png libpng @1.2.26_0 (active) libpng @1.2.29_0 }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 10:52:06 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 17:52:06 -0000 Subject: [MacPorts] #15554: gnome-terminal 2.22.1_0 Incompatible library version In-Reply-To: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> References: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> Message-ID: <063.e72158cf4e242ac5739ea47cc7e0bf7d@macports.org> #15554: gnome-terminal 2.22.1_0 Incompatible library version ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by jmr at macports.org): Ah, the older version of libpng is active. Try this: {{{ sudo port deactivate libpng @1.2.26_0 sudo port activate libpng @1.2.29_0 }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 12:56:18 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 19:56:18 -0000 Subject: [MacPorts] #15571: request - uniform Portfile standard to handle the different possibilities of Fortran compilers Message-ID: <059.77a36c1530d3e885f24fce31ec98179b@macports.org> #15571: request - uniform Portfile standard to handle the different possibilities of Fortran compilers -------------------------------------+-------------------------------------- Reporter: davidh at ipac.caltech.edu | Owner: markd at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: guide | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- I don't write code in Fortran, but some of the ports I use require Fortran. Different Portfiles depend on different Fortran compilers. Contrast fftw-3(g95, gfortran/gcc4.2, gfortan/gcc4.3) pgplot(g77 on PPC, gfortran/gcc4.2 on i386) and cfitsio(gfortran/gcc42). There are at least 4 compilers to choose from. My request: formulate a standard to allow any of the compilers to be selected with a variant. The fftw-3 Portfile comes closest with variants to select any one of 3 compilers. If possible, I'd like to see g77 deprecated. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 13:43:32 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 20:43:32 -0000 Subject: [MacPorts] #14123: base-1.6.0 "port uninstall" left installed files at case-sensitive FS In-Reply-To: <049.2f1ff7b7b823adc960252039260e1af8@macports.org> References: <049.2f1ff7b7b823adc960252039260e1af8@macports.org> Message-ID: <058.efe33da71b0dc637036c53aa9932e8b2@macports.org> #14123: base-1.6.0 "port uninstall" left installed files at case-sensitive FS ----------------------------+----------------------------------------------- Reporter: ononon at csc.jp | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: MacPorts base bugs Component: base | Version: 1.6.0 Resolution: | Keywords: ----------------------------+----------------------------------------------- Comment (by jmr at macports.org): To answer my own question, yes, applying just this patch breaks deactivation. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 14:40:37 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 21:40:37 -0000 Subject: [MacPorts] #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries In-Reply-To: <057.7fcc3c931c496e6418828ef25649d574@macports.org> References: <057.7fcc3c931c496e6418828ef25649d574@macports.org> Message-ID: <066.fd9cbe507d6a508a06a0ce02fbedc152@macports.org> #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries ------------------------------------+--------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by ryandesign at macports.org): I don't think the X11 prefix should be set to /Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6. Doesn't that then require that the MacOSX10.4u SDK be installed on the target system? That's not how the SDKs should be used. I think the correct solution is to set the X11 prefix to /usr/X11R6 and set the sysroot to /Developer/SDKs/MacOSX10.4u.sdk which should take care of linking X11 things with /Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6 at build time. Have you tried setting universal_sysroot in macports.conf instead? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 15:05:08 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 22:05:08 -0000 Subject: [MacPorts] #15572: readline 5.2.012 fails to install (no such file or directory) Message-ID: <059.911383584663728d197a95d77e34fdfc@macports.org> #15572: readline 5.2.012 fails to install (no such file or directory) -------------------------------------+-------------------------------------- Reporter: silverdemon at sitosis.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- compiles fine, but doesn't install. {{{ Beginning configuration for readline-5.2 for powerpc-apple-darwin9.3.0 checking whether make sets $(MAKE)... yes checking for gcc... /usr/bin/gcc-4.0 checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.0 accepts -g... yes checking for /usr/bin/gcc-4.0 option to accept ANSI C... none needed checking how to run the C preprocessor... /usr/bin/cpp-4.0 checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether /usr/bin/gcc-4.0 needs -traditional... no checking for a BSD-compatible install... /usr/bin/install checking for ar... ar checking for ranlib... ranlib checking for an ANSI C-conforming const... yes checking for function prototypes... yes checking whether char is unsigned... no checking return type of signal handlers... void checking for size_t... yes checking for ssize_t... yes checking for ANSI C header files... (cached) yes checking whether stat file-mode macros are broken... no checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for fcntl... yes checking for kill... yes checking for lstat... yes checking for memmove... yes checking for putenv... yes checking for select... yes checking for setenv... yes checking for setlocale... yes checking for strcasecmp... yes checking for strpbrk... yes checking for tcgetattr... yes checking for vsnprintf... yes checking for isascii... yes checking for isxdigit... yes checking for getpwent... yes checking for getpwnam... yes checking for getpwuid... yes checking for working strcoll... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for unistd.h... (cached) yes checking for stdlib.h... (cached) yes checking varargs.h usability... no checking varargs.h presence... no checking for varargs.h... no checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking for memory.h... (cached) yes checking termcap.h usability... yes checking termcap.h presence... yes checking for termcap.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking termio.h usability... no checking termio.h presence... no checking for termio.h... no checking sys/pte.h usability... no checking sys/pte.h presence... no checking for sys/pte.h... no checking sys/stream.h usability... no checking sys/stream.h presence... no checking for sys/stream.h... no checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking for sys/ptem.h... no checking for type of signal functions... posix checking if signal handlers must be reinstalled when invoked... no checking for presence of POSIX-style sigsetjmp/siglongjmp... present checking for lstat... yes checking whether or not strcoll and strcmp differ... no checking whether the ctype macros accept non-ascii characters... yes checking whether getpw functions are declared in pwd.h... yes checking whether termios.h defines TIOCGWINSZ... yes checking whether signal handlers are of type void... yes checking for TIOCSTAT in sys/ioctl.h... yes checking for FIONREAD in sys/ioctl.h... yes checking for speed_t in sys/types.h... no checking for struct winsize in sys/ioctl.h and termios.h... sys/ioctl.h checking for struct dirent.d_ino... yes checking for struct dirent.d_fileno... yes checking for tgetent... no checking for tgetent in -ltermcap... yes checking which library has the termcap functions... using libtermcap checking wctype.h usability... yes checking wctype.h presence... yes checking for wctype.h... yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking for mbsrtowcs... yes checking for mbrlen... yes checking for wcrtomb... yes checking for wcscoll... yes checking for wcsdup... no checking for wcwidth... yes checking for wctype... yes checking whether mbrtowc and mbstate_t are properly declared... yes checking for iswlower... yes checking for iswupper... yes checking for towlower... yes checking for towupper... yes checking for iswctype... yes checking for nl_langinfo and CODESET... yes checking for wchar_t in wchar.h... yes checking for wctype_t in wctype.h... yes checking for wint_t in wctype.h... yes checking configuration for building shared libraries... supported configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating examples/Makefile config.status: creating shlib/Makefile config.status: creating config.h config.status: executing default commands ---> Building readline with target all rm -f readline.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 readline.c rm -f vi_mode.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 vi_mode.c rm -f funmap.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 funmap.c rm -f keymaps.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 keymaps.c rm -f parens.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 parens.c rm -f search.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 search.c rm -f rltty.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 rltty.c rm -f complete.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 complete.c rm -f bind.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 bind.c bind.c: In function 'rl_function_of_keyseq': bind.c:704: warning: comparison is always true due to limited range of data type rm -f isearch.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 isearch.c rm -f display.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 display.c display.c: In function 'rl_character_len': display.c:1961: warning: comparison is always true due to limited range of data type rm -f signals.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 signals.c rm -f util.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 util.c rm -f kill.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 kill.c rm -f undo.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 undo.c rm -f macro.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 macro.c rm -f input.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 input.c rm -f callback.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 callback.c rm -f terminal.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 terminal.c rm -f text.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 text.c rm -f nls.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 nls.c rm -f misc.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 misc.c rm -f compat.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 compat.c rm -f xmalloc.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 xmalloc.c rm -f history.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 history.c rm -f histexpand.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 histexpand.c rm -f histfile.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 histfile.c rm -f histsearch.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 histsearch.c rm -f shell.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 shell.c rm -f mbutil.o /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 mbutil.c rm -f tilde.o /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I/opt/local/include -I. -I. -DRL_LIBRARY_VERSION='"5.2"' -O2 -DREADLINE_LIBRARY -c ./tilde.c rm -f libreadline.a ar cr libreadline.a readline.o vi_mode.o funmap.o keymaps.o parens.o search.o rltty.o complete.o bind.o isearch.o display.o signals.o util.o kill.o undo.o macro.o input.o callback.o terminal.o text.o nls.o misc.o compat.o xmalloc.o history.o histexpand.o histfile.o histsearch.o shell.o mbutil.o tilde.o test -n "ranlib" && ranlib libreadline.a rm -f libhistory.a ar cr libhistory.a history.o histexpand.o histfile.o histsearch.o shell.o mbutil.o xmalloc.o test -n "ranlib" && ranlib libhistory.a test -d shlib || mkdir shlib ( cd shlib ; make all ) rm -f readline.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o readline.o ../readline.c mv readline.o readline.so rm -f vi_mode.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o vi_mode.o ../vi_mode.c mv vi_mode.o vi_mode.so rm -f funmap.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o funmap.o ../funmap.c mv funmap.o funmap.so rm -f keymaps.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o keymaps.o ../keymaps.c mv keymaps.o keymaps.so rm -f parens.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o parens.o ../parens.c mv parens.o parens.so rm -f search.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o search.o ../search.c mv search.o search.so rm -f rltty.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o rltty.o ../rltty.c mv rltty.o rltty.so rm -f complete.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o complete.o ../complete.c mv complete.o complete.so rm -f bind.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o bind.o ../bind.c ../bind.c: In function 'rl_function_of_keyseq': ../bind.c:704: warning: comparison is always true due to limited range of data type mv bind.o bind.so rm -f isearch.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o isearch.o ../isearch.c mv isearch.o isearch.so rm -f display.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o display.o ../display.c ../display.c: In function 'rl_character_len': ../display.c:1961: warning: comparison is always true due to limited range of data type mv display.o display.so rm -f signals.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o signals.o ../signals.c mv signals.o signals.so rm -f util.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o util.o ../util.c mv util.o util.so rm -f kill.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o kill.o ../kill.c mv kill.o kill.so rm -f undo.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o undo.o ../undo.c mv undo.o undo.so rm -f macro.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o macro.o ../macro.c mv macro.o macro.so rm -f input.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o input.o ../input.c mv input.o input.so rm -f callback.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o callback.o ../callback.c mv callback.o callback.so rm -f terminal.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o terminal.o ../terminal.c mv terminal.o terminal.so rm -f text.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o text.o ../text.c mv text.o text.so rm -f nls.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o nls.o ../nls.c mv nls.o nls.so rm -f misc.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o misc.o ../misc.c mv misc.o misc.so rm -f xmalloc.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o xmalloc.o ../xmalloc.c mv xmalloc.o xmalloc.so rm -f history.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o history.o ../history.c mv history.o history.so rm -f histexpand.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o histexpand.o ../histexpand.c mv histexpand.o histexpand.so rm -f histfile.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o histfile.o ../histfile.c mv histfile.o histfile.so rm -f histsearch.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o histsearch.o ../histsearch.c mv histsearch.o histsearch.so rm -f shell.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o shell.o ../shell.c mv shell.o shell.so rm -f mbutil.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o mbutil.o ../mbutil.c mv mbutil.o mbutil.so rm -f tilde.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -DREADLINE_LIBRARY -c -o tilde.o ../tilde.c mv tilde.o tilde.so rm -f compat.so /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I/opt/local/include -I. -I.. -I.. -DRL_LIBRARY_VERSION='"5.2"' -O2 -fno-common -o compat.o ../compat.c mv compat.o compat.so rm -f libreadline.5.2.dylib MACOSX_DEPLOYMENT_TARGET=10.3 /usr/bin/gcc-4.0 -dynamiclib -dynamic -undefined dynamic_lookup -arch_only `/usr/bin/arch` -L/opt/local/lib -dynamiclib -arch_only `/usr/bin/arch` -install_name /opt/local/lib/libreadline.5.2.dylib -current_version 5.2 -compatibility_version 5 -v -o libreadline.5.2.dylib readline.so vi_mode.so funmap.so keymaps.so parens.so search.so rltty.so complete.so bind.so isearch.so display.so signals.so util.so kill.so undo.so macro.so input.so callback.so terminal.so text.so nls.so misc.so xmalloc.so history.so histexpand.so histfile.so histsearch.so shell.so mbutil.so tilde.so compat.so -lncurses Using built-in specs. Target: powerpc-apple-darwin9 Configured with: /var/tmp/gcc/gcc-5465~16/src/configure --disable-checking -enable-werror --prefix=/usr --mandir=/share/man --enable- languages=c,objc,c++,obj-c++ --program-transform- name=/^[cg][^.-]*$/s/$/-4.0/ --with-gxx-include-dir=/include/c++/4.0.0 --with-slibdir=/usr/lib --build=i686-apple-darwin9 --program-prefix= --host=powerpc-apple-darwin9 --target=powerpc-apple-darwin9 Thread model: posix gcc version 4.0.1 (Apple Inc. build 5465) /usr/libexec/gcc/powerpc-apple-darwin9/4.0.1/collect2 -dynamic -dylib -dylib_compatibility_version 5 -dylib_current_version 5.2 -arch ppc -dylib_install_name /opt/local/lib/libreadline.5.2.dylib -dynamic -macosx_version_min 10.3 -undefined dynamic_lookup -weak_reference_mismatches non-weak -undefined dynamic_lookup -o libreadline.5.2.dylib -ldylib1.o -L/opt/local/lib -L/usr/lib/powerpc- apple-darwin9/4.0.1 -L/usr/lib/gcc/powerpc-apple-darwin9/4.0.1 -L/usr/lib/gcc/powerpc-apple-darwin9/4.0.1 -L/usr/lib/gcc/powerpc-apple- darwin9/4.0.1/../../../powerpc-apple-darwin9/4.0.1 -L/usr/lib/gcc/powerpc- apple-darwin9/4.0.1/../../.. readline.so vi_mode.so funmap.so keymaps.so parens.so search.so rltty.so complete.so bind.so isearch.so display.so signals.so util.so kill.so undo.so macro.so input.so callback.so terminal.so text.so nls.so misc.so xmalloc.so history.so histexpand.so histfile.so histsearch.so shell.so mbutil.so tilde.so compat.so -lncurses -lgcc -lSystemStubs -lmx -lSystem rm -f libhistory.5.2.dylib MACOSX_DEPLOYMENT_TARGET=10.3 /usr/bin/gcc-4.0 -dynamiclib -dynamic -undefined dynamic_lookup -arch_only `/usr/bin/arch` -L/opt/local/lib -dynamiclib -arch_only `/usr/bin/arch` -install_name /opt/local/lib/libhistory.5.2.dylib -current_version 5.2 -compatibility_version 5 -v -o libhistory.5.2.dylib history.so histexpand.so histfile.so histsearch.so shell.so mbutil.so xmalloc.so -lncurses Using built-in specs. Target: powerpc-apple-darwin9 Configured with: /var/tmp/gcc/gcc-5465~16/src/configure --disable-checking -enable-werror --prefix=/usr --mandir=/share/man --enable- languages=c,objc,c++,obj-c++ --program-transform- name=/^[cg][^.-]*$/s/$/-4.0/ --with-gxx-include-dir=/include/c++/4.0.0 --with-slibdir=/usr/lib --build=i686-apple-darwin9 --program-prefix= --host=powerpc-apple-darwin9 --target=powerpc-apple-darwin9 Thread model: posix gcc version 4.0.1 (Apple Inc. build 5465) /usr/libexec/gcc/powerpc-apple-darwin9/4.0.1/collect2 -dynamic -dylib -dylib_compatibility_version 5 -dylib_current_version 5.2 -arch ppc -dylib_install_name /opt/local/lib/libhistory.5.2.dylib -dynamic -macosx_version_min 10.3 -undefined dynamic_lookup -weak_reference_mismatches non-weak -undefined dynamic_lookup -o libhistory.5.2.dylib -ldylib1.o -L/opt/local/lib -L/usr/lib/powerpc-apple- darwin9/4.0.1 -L/usr/lib/gcc/powerpc-apple-darwin9/4.0.1 -L/usr/lib/gcc /powerpc-apple-darwin9/4.0.1 -L/usr/lib/gcc/powerpc-apple-darwin9/4.0.1 /../../../powerpc-apple-darwin9/4.0.1 -L/usr/lib/gcc/powerpc-apple- darwin9/4.0.1/../../.. history.so histexpand.so histfile.so histsearch.so shell.so mbutil.so xmalloc.so -lncurses -lgcc -lSystemStubs -lmx -lSystem ---> Staging readline into destroot . changed gid expected 0 found 80 modified ./usr missing (created) . missing (directory not created: File exists) ./Applications missing (created) ./Developer missing (created) ./Library missing (created) . changed gid expected 80 found 0 modified ./bin missing (created) ./etc missing (created) ./include missing (created) ./lib missing (created) ./libexec missing (created) ./sbin missing (created) ./share missing (created) ./share/info missing (created) ./share/man missing (created) ./share/man/cat1 missing (created) ./share/man/cat2 missing (created) ./share/man/cat3 missing (created) ./share/man/cat4 missing (created) ./share/man/cat5 missing (created) ./share/man/cat6 missing (created) ./share/man/cat7 missing (created) ./share/man/cat8 missing (created) ./share/man/cat9 missing (created) ./share/man/catl missing (created) ./share/man/catn missing (created) ./share/man/man1 missing (created) ./share/man/man2 missing (created) ./share/man/man3 missing (created) ./share/man/man4 missing (created) ./share/man/man5 missing (created) ./share/man/man6 missing (created) ./share/man/man7 missing (created) ./share/man/man8 missing (created) ./share/man/man9 missing (created) ./share/man/manl missing (created) ./share/man/mann missing (created) ./share/nls missing (created) ./share/nls/C missing (created) ./share/nls/af_ZA.ISO8859-1 missing (created) ./share/nls/af_ZA.ISO8859-15 missing (created) ./share/nls/bg_BG.CP1251 missing (created) ./share/nls/cs_CZ.ISO8859-2 missing (created) ./share/nls/da_DK.ISO8859-1 missing (created) ./share/nls/da_DK.ISO8859-15 missing (created) ./share/nls/de_AT.ISO8859-1 missing (created) ./share/nls/de_AT.ISO8859-15 missing (created) ./share/nls/de_CH.ISO8859-1 missing (created) ./share/nls/de_CH.ISO8859-15 missing (created) ./share/nls/de_DE.ISO8859-1 missing (created) ./share/nls/de_DE.ISO8859-15 missing (created) ./share/nls/el_GR.ISO8859-7 missing (created) ./share/nls/en_AU.ISO8859-1 missing (created) ./share/nls/en_AU.ISO8859-15 missing (created) ./share/nls/en_AU.US-ASCII missing (created) ./share/nls/en_CA.ISO8859-1 missing (created) ./share/nls/en_CA.ISO8859-15 missing (created) ./share/nls/en_CA.US-ASCII missing (created) ./share/nls/en_GB.ISO8859-1 missing (created) ./share/nls/en_GB.ISO8859-15 missing (created) ./share/nls/en_GB.US-ASCII missing (created) ./share/nls/en_NZ.ISO8859-1 missing (created) ./share/nls/en_NZ.ISO8859-15 missing (created) ./share/nls/en_NZ.US-ASCII missing (created) ./share/nls/en_US.ISO8859-1 missing (created) ./share/nls/en_US.ISO8859-15 missing (created) ./share/nls/es_ES.ISO8859-1 missing (created) ./share/nls/es_ES.ISO8859-15 missing (created) ./share/nls/et_EE.ISO8859-15 missing (created) ./share/nls/fi_FI.ISO8859-1 missing (created) ./share/nls/fi_FI.ISO8859-15 missing (created) ./share/nls/fr_BE.ISO8859-1 missing (created) ./share/nls/fr_BE.ISO8859-15 missing (created) ./share/nls/fr_CA.ISO8859-1 missing (created) ./share/nls/fr_CA.ISO8859-15 missing (created) ./share/nls/fr_CH.ISO8859-1 missing (created) ./share/nls/fr_CH.ISO8859-15 missing (created) ./share/nls/fr_FR.ISO8859-1 missing (created) ./share/nls/fr_FR.ISO8859-15 missing (created) ./share/nls/hi_IN.ISCII-DEV missing (created) ./share/nls/hr_HR.ISO8859-2 missing (created) ./share/nls/hu_HU.ISO8859-2 missing (created) ./share/nls/is_IS.ISO8859-1 missing (created) ./share/nls/is_IS.ISO8859-15 missing (created) ./share/nls/it_CH.ISO8859-1 missing (created) ./share/nls/it_CH.ISO8859-15 missing (created) ./share/nls/it_IT.ISO8859-1 missing (created) ./share/nls/it_IT.ISO8859-15 missing (created) ./share/nls/ja_JP.SJIS missing (created) ./share/nls/ja_JP.eucJP missing (created) ./share/nls/ko_KR.eucKR missing (created) ./share/nls/la_LN.ISO8859-1 missing (created) ./share/nls/la_LN.ISO8859-15 missing (created) ./share/nls/la_LN.ISO8859-2 missing (created) ./share/nls/la_LN.ISO8859-4 missing (created) ./share/nls/la_LN.US-ASCII missing (created) ./share/nls/lt_LT.ISO8859-4 missing (created) ./share/nls/nl_BE.ISO8859-1 missing (created) ./share/nls/nl_BE.ISO8859-15 missing (created) ./share/nls/nl_NL.ISO8859-1 missing (created) ./share/nls/nl_NL.ISO8859-15 missing (created) ./share/nls/no_NO.ISO8859-1 missing (created) ./share/nls/no_NO.ISO8859-15 missing (created) ./share/nls/pl_PL.ISO8859-2 missing (created) ./share/nls/pt_BR.ISO8859-1 missing (created) ./share/nls/pt_PT.ISO8859-1 missing (created) ./share/nls/pt_PT.ISO8859-15 missing (created) ./share/nls/ro_RO.ISO8859-2 missing (created) ./share/nls/ru_RU.CP866 missing (created) ./share/nls/ru_RU.ISO8859-5 missing (created) ./share/nls/ru_RU.KOI8-R missing (created) ./share/nls/sk_SK.ISO8859-2 missing (created) ./share/nls/sl_SI.ISO8859-2 missing (created) ./share/nls/sv_SE.ISO8859-1 missing (created) ./share/nls/sv_SE.ISO8859-15 missing (created) ./share/nls/tr_TR.ISO8859-9 missing (created) ./share/nls/uk_UA.ISO8859-5 missing (created) ./share/nls/uk_UA.KOI8-U missing (created) ./share/nls/zh_CN.eucCN missing (created) ./share/nls/zh_TW.Big5 missing (created) ./share/skel missing (created) ./src missing (created) ./var missing (created) ./var/macports missing (created) ./var/macports/distfiles missing (created) ./var/macports/receipts missing (created) ./var/macports/registry missing (created) ./www missing (created) /bin/sh ./support/mkinstalldirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/include \ /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/include/readline /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib \ /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/man/man3 mkdir -p -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/include/readline /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/man/man3 for f in readline.h chardefs.h keymaps.h history.h tilde.h rlstdc.h rlconf.h rltypedefs.h; do \ /usr/bin/install -m 644 ./$f /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/include/readline ; \ done ( if test -d doc ; then \ cd doc && \ make infodir=/opt/local/share/info DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot install; \ fi ) /bin/sh ../support/mkdirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/man/man3 if test -n "" ; then \ /bin/sh ../support/mkdirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot ; \ fi if test -f readline.info; then \ /usr/bin/install -m 644 readline.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/readline.info; \ else \ /usr/bin/install -m 644 ./readline.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/readline.info; \ fi if test -f rluserman.info; then \ /usr/bin/install -m 644 rluserman.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/rluserman.info; \ else \ /usr/bin/install -m 644 ./rluserman.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/rluserman.info; \ fi if test -f history.info; then \ /usr/bin/install -m 644 history.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/history.info; \ else \ /usr/bin/install -m 644 ./history.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/history.info; \ fi if /bin/sh -c 'install-info --version' >/dev/null 2>&1; then \ install-info --dir- file=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/dir \ /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/readline.info ; \ install-info --dir- file=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/dir \ /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/history.info ; \ install-info --dir- file=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/dir \ /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/rluserman.info ; \ else true; fi install- info(/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/readline.info): no backup file /var/backups/infodir.bak available. install- info(/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/readline.info): no default file /usr/share/base-files/info.dir available, giving up. * Readline: (readline). The GNU readline library API. install- info(/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/history.info): no backup file /var/backups/infodir.bak available. install- info(/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/history.info): no default file /usr/share/base-files/info.dir available, giving up. * History: (history). The GNU history library API. install- info(/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/rluserman.info): no backup file /var/backups/infodir.bak available. install- info(/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/info/rluserman.info): no default file /usr/share/base-files/info.dir available, giving up. * RLuserman: (rluserman). The GNU readline library User's Manual. make[1]: [install] Error 1 (ignored) /usr/bin/install -m 644 ./readline.3 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/man/man3/readline.3 /usr/bin/install -m 644 ./history.3 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/share/man/man3/history.3 if test -n "" ; then \ if test -f readline.html; then \ /usr/bin/install -m 644 readline.html /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/readline.html; \ else \ /usr/bin/install -m 644 ./readline.html /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/readline.html; \ fi ; \ if test -f history.html; then \ /usr/bin/install -m 644 history.html /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/history.html; \ else \ /usr/bin/install -m 644 ./history.html /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/history.html; \ fi ; \ if test -f rluserman.html; then \ /usr/bin/install -m 644 rluserman.html /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/rluserman.html; \ else \ /usr/bin/install -m 644 ./rluserman.html /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/rluserman.html; \ fi ; \ fi mv /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libreadline.a /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libreadline.old mv: rename /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libreadline.a to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libreadline.old: No such file or directory make: [install-static] Error 1 (ignored) /usr/bin/install -m 644 libreadline.a /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libreadline.a test -n "ranlib" && ranlib /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libreadline.a mv /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libhistory.a /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libhistory.old mv: rename /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libhistory.a to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libhistory.old: No such file or directory make: [install-static] Error 1 (ignored) /usr/bin/install -m 644 libhistory.a /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libhistory.a test -n "ranlib" && ranlib /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib/libhistory.a test -d shlib || mkdir shlib ( cd shlib ; make all ) make[1]: Nothing to be done for `all'. ( cd shlib ; make DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot install ) /bin/sh ../support/mkdirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib /bin/sh ../support/shlib-install -O darwin9.3.0 -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib -b /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/bin -i "/usr/bin/install -m 644" libhistory.5.2.dylib /bin/sh ../support/shlib-install -O darwin9.3.0 -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/lib -b /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work/destroot/opt/local/bin -i "/usr/bin/install -m 644" libreadline.5.2.dylib install: you may need to run ldconfig Error: Target org.macports.destroot returned: no such file or directory Warning: the following items did not execute (for readline): org.macports.activate org.macports.destroot org.macports.install Error: Status 1 encountered during processing. [root ~]# }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 16:04:43 2008 From: noreply at macports.org (MacPorts) Date: Mon, 09 Jun 2008 23:04:43 -0000 Subject: [MacPorts] #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries In-Reply-To: <057.7fcc3c931c496e6418828ef25649d574@macports.org> References: <057.7fcc3c931c496e6418828ef25649d574@macports.org> Message-ID: <066.715758fa8b9a15f343354c5e16a0f08b@macports.org> #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries ------------------------------------+--------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by david at bamsoftware.com): Replying to [comment:2 ryandesign at macports.org]: > I don't think the X11 prefix should be set to /Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6. Doesn't that then require that the MacOSX10.4u SDK be installed on the target system? It doesn't seem to. I package the Nmap frontend [http://nmap.org/zenmap Zenmap] for Mac OS X using MacPorts to build its dependencies. The package runs universal on 10.4 and 10.5. I don't have a 10.4 machine to test on, so I relied on user reports to make things work on that platform. Before this change the application would crash on 10.4 with the following error: {{{ ImportError: dlopen(/Applications/Zenmap.app/Contents/Resources/lib/python2.5/gtk/_gtk.so, 2): Library not loaded: /usr/X11/lib/libXau.6.dylib Referenced from: /Applications/Zenmap.app/Contents/Resources/lib/python2.5/gtk/_gtk.so Reason: image not found }}} Linking against the 10.4u X11 headers seems to avoid this dependency on libXau, and the resultant binary runs fine on 10.5, linking against the proper libraries in /usr/X11R6: {{{ $ otool -L /Applications/Zenmap.app/Contents/Resources/lib/python2.5/gtk/_gtk.so /Applications/Zenmap.app/Contents/Resources/lib/python2.5/gtk/_gtk.so: @executable_path/../Frameworks/libgtk-x11-2.0.0.dylib (compatibility version 1201.0.0, current version 1201.9.0) ... @executable_path/../Frameworks/libpangocairo-1.0.0.dylib (compatibility version 2002.0.0, current version 2002.1.0) /usr/X11R6/lib/libSM.6.dylib (compatibility version 6.0.0, current version 6.0.0) /usr/X11R6/lib/libICE.6.dylib (compatibility version 6.3.0, current version 6.3.0) /usr/X11R6/lib/libX11.6.dylib (compatibility version 6.2.0, current version 6.2.0) @executable_path/../Frameworks/libcairo.2.dylib (compatibility version 20.0.0, current version 20.5.0) ... }}} (Edited for brevity.) > That's not how the SDKs should be used. I think the correct solution is to set the X11 prefix to /usr/X11R6 and set the sysroot to /Developer/SDKs/MacOSX10.4u.sdk which should take care of linking X11 things with /Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6 at build time. Forgive my ignorance. I'm new to Mac development. How should the SDKs be used? Setting the sysroot works for most packages, but a few (like these) need special treatment. I have been maintaining a patch against the ports tree that allow building a 10.4-compatible universal environment. This is one of the changes in the patch. > Have you tried setting universal_sysroot in macports.conf instead? Yes. The MacPorts installation I use to build releases is a Subversion checkout of 1.7.0, configured as follows: {{{ export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11/bin sudo mkdir /Library/Tcl/macports-universal-10.4 ./configure --prefix=/opt/local-universal-10.4 --with- tclpackage=/Library/Tcl/macports-universal-10.4 \ --with-universal-target=10.4 --with-universal- sysroot=/Developer/SDKs/MacOSX10.4u.sdk \ --with-x11-prefix=/Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6 }}} Which sets universal_sysroot to {{{ universal_sysroot /Developer/SDKs/MacOSX10.4u.sdk }}} That takes care of most packages, but the ones mentioned were linking against the local 10.5 X11 libraries before this patch. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 17:02:30 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 00:02:30 -0000 Subject: [MacPorts] #14707: Port Request: kmymoney2 In-Reply-To: <053.e51822307b118b38c522da100bc3dc28@macports.org> References: <053.e51822307b118b38c522da100bc3dc28@macports.org> Message-ID: <062.b33a709cf08a8e200abacb0dc6aae3bc@macports.org> #14707: Port Request: kmymoney2 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: | Keywords: kmymoney --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * summary: Port Request: kmymoney2 0.8.8 => Port Request: kmymoney2 Comment: Just attach it here. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 17:12:53 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 00:12:53 -0000 Subject: [MacPorts] #15571: request - uniform Portfile standard to handle the different possibilities of Fortran compilers In-Reply-To: <059.77a36c1530d3e885f24fce31ec98179b@macports.org> References: <059.77a36c1530d3e885f24fce31ec98179b@macports.org> Message-ID: <068.64175a36b396a6b5eacb9658ead834f0@macports.org> #15571: request - uniform Portfile standard to handle the different possibilities of Fortran compilers --------------------------------------+------------------------------------- Reporter: davidh at ipac.caltech.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: fortran portgroup --------------------------------------+------------------------------------- Changes (by raimue at macports.org): * keywords: => fortran portgroup * owner: markd at macports.org => macports-tickets at lists.macosforge.org * component: guide => ports * milestone: => Port Enhancements Comment: I think it would be nice to have some fortran PortGroup which just adds different variants selecting the appropriate compiler. So we can avoid the code duplication needed in each port. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 18:14:29 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 01:14:29 -0000 Subject: [MacPorts] #15573: build of vile on leopard 10.5.3 failed Message-ID: <058.aa0a6a0ce95844b9c047a52f6e554203@macports.org> #15573: build of vile on leopard 10.5.3 failed ------------------------------------+--------------------------------------- Reporter: tomhirashima at yahoo.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: vile, ncurses | ------------------------------------+--------------------------------------- {{{ $ sudo port install vile ---> Fetching vile ---> Verifying checksum(s) for vile ---> Extracting vile ---> Configuring vile Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_editors_vile/work/vile-9.5" && ./configure --prefix=/opt/local --with-perl --with-ncurses --mandir=/opt/local/share/man " returned error 1 Command output: checking if we may include sys/resource.h with sys/wait.h... no checking for termio.h... (cached) no checking for termios.h... (cached) yes checking for unistd.h... (cached) yes checking whether termios.h needs _POSIX_SOURCE... no checking declaration of size-change... yes checking for file-pointer ready definition... ( (p)->_r > 0) checking for and functions... yes checking for library containing wctype... none required checking for long file names... yes checking for restartable reads on pipes... yes checking whether setpgrp takes no argument... yes checking whether getpgrp takes no argument... yes checking if killpg is needed... no checking if external errno is declared... yes checking if external errno exists... yes checking if external sys_nerr is declared... yes checking if external sys_nerr exists... yes checking if external sys_errlist is declared... yes checking if external sys_errlist exists... yes checking for screen type... termcap checking if you want to use ncurses... yes checking for ncurses header in include-path... ncurses/curses.h checking for ncurses version... 5.6.20061217 checking for Gpm_Open in -lgpm... no checking for initscr... no checking for initscr in -lncurses... no checking for -lncurses in /opt/local/lib... no checking for -lncurses in /usr/lib... no configure: error: Cannot link ncurses library Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 18:58:00 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 01:58:00 -0000 Subject: [MacPorts] #15573: build of vile on leopard 10.5.3 failed In-Reply-To: <058.aa0a6a0ce95844b9c047a52f6e554203@macports.org> References: <058.aa0a6a0ce95844b9c047a52f6e554203@macports.org> Message-ID: <067.30333fa0ff54c56ce0961e0e7b0896ae@macports.org> #15573: build of vile on leopard 10.5.3 failed -------------------------------------+-------------------------------------- Reporter: tomhirashima at yahoo.com | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: vile, ncurses -------------------------------------+-------------------------------------- Changes (by raimue at macports.org): * owner: macports-tickets at lists.macosforge.org => waqar at macports.org Comment: vile does not declare dependency on ncurses while it obviously should. Workaround: {{{ $ sudo port install ncurses vile }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 19:27:56 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 02:27:56 -0000 Subject: [MacPorts] #15574: php5 5.2.6 Port error - Outdated source Message-ID: <060.dad8ee5f426fed45bc8ecc58a36a1f45@macports.org> #15574: php5 5.2.6 Port error - Outdated source --------------------------------------+------------------------------------- Reporter: mrich54907 at clearwire.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------+------------------------------------- The file for freetds has changed from version 0.63 to 0.82. The macports no longer can install php with +mssql option because of dependency on this file. I have Patched the portfile as the documents state but it asks me for a makefile.in which i don't need to update. It is just the version number and the corresponing checksum for the file that need updating. Just for my knowledge if i create a portfile patch and patched it in the correct directory what else should i have done? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 19:50:19 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 02:50:19 -0000 Subject: [MacPorts] #15575: Minicom fails with checksum mismatch Message-ID: <054.9f0e4eff7b83740d6a60032500e99733@macports.org> #15575: Minicom fails with checksum mismatch --------------------------------+------------------------------------------- Reporter: martinhess at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- ---> Attempting to fetch minicom-2.3.tar.gz from http://alioth.debian.org/download.php/2332 ---> Verifying checksum(s) for minicom Error: Checksum (md5) mismatch for minicom-2.3.tar.gz Error: Checksum (sha1) mismatch for minicom-2.3.tar.gz Error: Target org.macports.checksum returned: Unable to verify file checksums Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 20:02:25 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 03:02:25 -0000 Subject: [MacPorts] #15575: Minicom fails with checksum mismatch In-Reply-To: <054.9f0e4eff7b83740d6a60032500e99733@macports.org> References: <054.9f0e4eff7b83740d6a60032500e99733@macports.org> Message-ID: <063.9edfe6e66a3ff88c77675bba5d18296d@macports.org> #15575: Minicom fails with checksum mismatch ---------------------------------+------------------------------------------ Reporter: martinhess at mac.com | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Changes (by ram at macports.org): * owner: macports-tickets at lists.macosforge.org => waqar at macports.org * milestone: => Port Bugs Comment: Looks like you got a corrupted download: {{{ [ram at cizin ~]$ sudo port -d checksum minicom ---> Verifying checksum(s) for minicom DEBUG: Executing org.macports.checksum (minicom) ---> Checksumming minicom-2.3.tar.gz DEBUG: Correct (md5) checksum for minicom-2.3.tar.gz DEBUG: Correct (sha1) checksum for minicom-2.3.tar.gz [ram at cizin ~]$ }}} try running {{{ $ sudo port clean --all minicom $ sudo port install minicom }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 20:29:35 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 03:29:35 -0000 Subject: [MacPorts] #15575: Minicom fails with checksum mismatch In-Reply-To: <054.9f0e4eff7b83740d6a60032500e99733@macports.org> References: <054.9f0e4eff7b83740d6a60032500e99733@macports.org> Message-ID: <063.b36eb3da09b92b36610ef60a56d189c6@macports.org> #15575: Minicom fails with checksum mismatch ---------------------------------+------------------------------------------ Reporter: martinhess at mac.com | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by martinhess at mac.com): I thought that might be the case so I tried sudo port clean which doesn't do what you might expect. Your command did the trick. Everything is working fine now. Thank you. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 20:38:20 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 03:38:20 -0000 Subject: [MacPorts] #15573: build of vile on leopard 10.5.3 failed In-Reply-To: <058.aa0a6a0ce95844b9c047a52f6e554203@macports.org> References: <058.aa0a6a0ce95844b9c047a52f6e554203@macports.org> Message-ID: <067.b0b68886ac8f52b4118a5bb9bb132e2d@macports.org> #15573: build of vile on leopard 10.5.3 failed -------------------------------------+-------------------------------------- Reporter: tomhirashima at yahoo.com | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: vile, ncurses -------------------------------------+-------------------------------------- Comment (by tomhirashima at yahoo.com): i already seem to have ncurses installed. issuing the workaround command returns "Skipping org.macports.activate (ncurses ) since this port is already active". have tried this on two different machines with similar ports installed (wget and optipng being the only ones, with dependencies). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 21:05:15 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 04:05:15 -0000 Subject: [MacPorts] #15575: Minicom fails with checksum mismatch In-Reply-To: <054.9f0e4eff7b83740d6a60032500e99733@macports.org> References: <054.9f0e4eff7b83740d6a60032500e99733@macports.org> Message-ID: <063.40b0f86434215e6685fb55097ecffcb7@macports.org> #15575: Minicom fails with checksum mismatch ---------------------------------+------------------------------------------ Reporter: martinhess at mac.com | Owner: waqar at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: invalid | Keywords: ---------------------------------+------------------------------------------ Changes (by ram at macports.org): * status: new => closed * resolution: => invalid -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Jun 9 22:53:08 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 05:53:08 -0000 Subject: [MacPorts] #15576: p5-text-csv_xs 0.34 needs update to 0.50 Message-ID: <056.ddd73c820100955a022b8a46f60f2c18@macports.org> #15576: p5-text-csv_xs 0.34 needs update to 0.50 ----------------------------------+----------------------------------------- Reporter: rbeyer at rossbeyer.net | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | ----------------------------------+----------------------------------------- This just updates this port to the latest version number available via CPAN. Patch file attached. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 02:08:53 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 09:08:53 -0000 Subject: [MacPorts] #15514: reinplace should warn if nothing got replaced In-Reply-To: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> References: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> Message-ID: <068.ea59ec82fd34e5da22f8d0c4bdb9ce01@macports.org> #15514: reinplace should warn if nothing got replaced --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by afb at macports.org): Issuing a warning shouldn't break the port build, even if it could be annoying if wrong. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 02:17:29 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 09:17:29 -0000 Subject: [MacPorts] #15577: Build on Jaguar: cannot determine flag to use for /usr/bin/sed Message-ID: <059.6cd53ec15a7506e3374324024f9e7325@macports.org> #15577: Build on Jaguar: cannot determine flag to use for /usr/bin/sed -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: afb at macports.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- Just for fun, I tried to compile MacPorts trunk on Mac OS X 10.2.8 Jaguar. It didn't work: {{{ checking for sed... (cached) /usr/bin/sed checking which sed flag to use for extended regexp... no idea configure: error: cannot determine flag to use for /usr/bin/sed }}} sed on Jaguar may not have any support for extended (modern) regular expressions. I can't find any mention of them in the manpage. We still have 99 ports with "`platform darwin 6`" sections so we may want to un-break building MacPorts on Jaguar. Not many ports use extended regular expressions in reinplace so we could make this a warning rather than a failure and just allow ports that do use extended regexp to fail on Jaguar. But extended regexp support was only recently added to MacPorts; the number of ports using it is sure to increase. Another option is that we could require users to manually install GNU sed first on Jaguar, though I don't know what the latest version is that still compiles on Jaguar (GNU sed 4.1.5 doesn't). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 02:22:11 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 09:22:11 -0000 Subject: [MacPorts] #15514: reinplace should warn if nothing got replaced In-Reply-To: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> References: <059.1465840a6c871ecb90a8ca6c08e9b7b6@macports.org> Message-ID: <068.7e0ece87659b903f23f46c8258b27705@macports.org> #15514: reinplace should warn if nothing got replaced --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): Replying to [comment:4 afb at macports.org]: > Issuing a warning shouldn't break the port build, even if it could be annoying if wrong. Exactly. So far in my limited tests the warning has been triggered in aquaterm, gd2, libsdl, perl5.8 and perl5.10. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 02:34:53 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 09:34:53 -0000 Subject: [MacPorts] #15577: Build on Jaguar: cannot determine flag to use for /usr/bin/sed In-Reply-To: <059.6cd53ec15a7506e3374324024f9e7325@macports.org> References: <059.6cd53ec15a7506e3374324024f9e7325@macports.org> Message-ID: <068.665c970a809097d4c05b06bfe75d6143@macports.org> #15577: Build on Jaguar: cannot determine flag to use for /usr/bin/sed --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: afb at macports.org Type: defect | Status: closed Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by afb at macports.org): * status: new => closed * resolution: => fixed Comment: Fixed, r37501. Makes missing extended regexp for sed a runtime failure. If needing to build a port with extended reinplace on a system that has an old sed, a newer (external) sed must be installed and given as variable `sed_command`. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 02:48:34 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 09:48:34 -0000 Subject: [MacPorts] #15426: BUG: py25-* fail with parallel building enabled In-Reply-To: <055.853a4555165b9d6b9a71caad87ded128@macports.org> References: <055.853a4555165b9d6b9a71caad87ded128@macports.org> Message-ID: <064.face42a57127bf38ae6fefc2de13eecd@macports.org> #15426: BUG: py25-* fail with parallel building enabled ----------------------------------+----------------------------------------- Reporter: raimue at macports.org | Owner: afb at macports.org Type: defect | Status: closed Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: fixed | Keywords: parallel ----------------------------------+----------------------------------------- Changes (by afb at macports.org): * status: new => closed * resolution: => fixed Comment: Fixed in r37070. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 03:02:53 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 10:02:53 -0000 Subject: [MacPorts] #15530: port build: assembled command's debug output missing parallel build argument In-Reply-To: <059.860ca152e05efbf811b063345b221dde@macports.org> References: <059.860ca152e05efbf811b063345b221dde@macports.org> Message-ID: <068.791e6dde4cc162b42d78ff4e4d5c6a4d@macports.org> #15530: port build: assembled command's debug output missing parallel build argument --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: afb at macports.org Type: defect | Status: closed Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by afb at macports.org): * status: assigned => closed * resolution: => fixed Comment: Fixed, r37503. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 03:12:46 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 10:12:46 -0000 Subject: [MacPorts] #13495: Error with included tclthread when attempting selfupdate on Leopard In-Reply-To: <060.db4fdbc7af8948a4421f20beacb73b73@macports.org> References: <060.db4fdbc7af8948a4421f20beacb73b73@macports.org> Message-ID: <069.c0bb2867c734a7157fa38808c97fdc30@macports.org> #13495: Error with included tclthread when attempting selfupdate on Leopard ---------------------------------------+------------------------------------ Reporter: sydbarrett74 at hotmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.5.0 Resolution: fixed | Keywords: selfupdate error ---------------------------------------+------------------------------------ Changes (by afb at macports.org): * status: new => closed * resolution: => fixed Comment: Fixed in r36723. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 03:27:09 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 10:27:09 -0000 Subject: [MacPorts] #15578: gmp: universal build is broken (t-get_d test fails) Message-ID: <059.36b8f5d2b841312e582771e7e78f72e2@macports.org> #15578: gmp: universal build is broken (t-get_d test fails) -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- I enabled the universal variant of gmp in r37327 because it seemed to build, but the test suite fails: {{{ creating t-scan make check-TESTS PASS: t-asmtype PASS: t-aors_1 PASS: t-divrem_1 PASS: t-fat mpn_get_d wrong on 2^n bit 0 exp 0 want_bit 0 sign 0 n =0x1 nsize 1 want =[00 00 00 00 00 00 F0 3F] 1 got =[FE 07 00 00 00 00 00 00] 1.0108583113911904294e-320 FAIL: t-get_d PASS: t-instrument PASS: t-iord_u PASS: t-mp_bases PASS: t-perfsqr PASS: t-scan ================================== 1 of 10 tests failed Please report to gmp-bugs at swox.com ================================== make[4]: *** [check-TESTS] Error 1 make[3]: *** [check-am] Error 2 make[2]: *** [check-recursive] Error 1 make[1]: *** [check-recursive] Error 1 make: *** [check] Error 2 }}} I'm [http://gmplib.org/list-archives/gmp-bugs/2008-June/001031.html asking the developers] for help with this problem. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 05:36:03 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 12:36:03 -0000 Subject: [MacPorts] #15516: wakeonlan: turn off universal variant In-Reply-To: <059.eddbfe6f684989ff6b072b4d1e003000@macports.org> References: <059.eddbfe6f684989ff6b072b4d1e003000@macports.org> Message-ID: <068.a1ad2465cf495abaefc95fc4d9ff1dd4@macports.org> #15516: wakeonlan: turn off universal variant --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by mww at macports.org): * status: new => assigned Comment: I probably missed any discussion about this, but: Aren't ports without binaries "universal" by default instead of not-universal-buildable? So an option that is equivalent to "default_variant +universal" would be cooler imho (but I suppose this has been discussed already?). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 06:32:53 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 13:32:53 -0000 Subject: [MacPorts] #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries In-Reply-To: <057.7fcc3c931c496e6418828ef25649d574@macports.org> References: <057.7fcc3c931c496e6418828ef25649d574@macports.org> Message-ID: <066.aac6ecd24f2a99c60f9f2b83045b4dba@macports.org> #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries ------------------------------------+--------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by afb at macports.org): Hmm, this wasn't a problem before when everything used /usr/X11R6 for x11prefix but you are right in that it will be when using different ones for Leopard/Tiger... `/Developer/SDKs/MacOSX10.4u.sdk` should not be in the prefix, though. The reason it fails to link is because it couldn't find /usr/X11 in the Tiger installation. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 06:35:27 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 13:35:27 -0000 Subject: [MacPorts] #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries In-Reply-To: <057.7fcc3c931c496e6418828ef25649d574@macports.org> References: <057.7fcc3c931c496e6418828ef25649d574@macports.org> Message-ID: <066.558213155aa56e55a9053f655dce39b3@macports.org> #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries ------------------------------------+--------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by afb at macports.org): BTW you should be able to use `/usr/X11R6` for both platforms, due to the compat symlink -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 07:36:20 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 14:36:20 -0000 Subject: [MacPorts] #15579: py-pygments 0.9 update to 0.10 Message-ID: <059.bc0d1bf73628bc78ab1227985ece506f@macports.org> #15579: py-pygments 0.9 update to 0.10 -------------------------------------+-------------------------------------- Reporter: arthur at arthurkoziel.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- Updating the version number works just fine! Patch attached. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 07:52:02 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 14:52:02 -0000 Subject: [MacPorts] #15579: py-pygments 0.9 update to 0.10 In-Reply-To: <059.bc0d1bf73628bc78ab1227985ece506f@macports.org> References: <059.bc0d1bf73628bc78ab1227985ece506f@macports.org> Message-ID: <068.adc148b7d5f998c09445fc0885384f93@macports.org> #15579: py-pygments 0.9 update to 0.10 --------------------------------------+------------------------------------- Reporter: arthur at arthurkoziel.com | Owner: erickt at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => erickt at macports.org Comment: CC'ing maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 08:16:07 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 15:16:07 -0000 Subject: [MacPorts] #15516: wakeonlan: turn off universal variant In-Reply-To: <059.eddbfe6f684989ff6b072b4d1e003000@macports.org> References: <059.eddbfe6f684989ff6b072b4d1e003000@macports.org> Message-ID: <068.d282cafb6c06584b5ac1c31bc926dada@macports.org> #15516: wakeonlan: turn off universal variant --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by raimue at macports.org): I can't remember if we came to a conclusion about this on the mailing list and can't find the specific thread in the archive right now. I think `universal_variant no` should indicate that there is no way to get a universal build of this port. While ports already being universal (because they contain scripts only and no binaries) should specify this: {{{ default_variants +universal variant universal {} }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 09:17:43 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 16:17:43 -0000 Subject: [MacPorts] #15580: py25-ldap Message-ID: <053.d7ac7a8655f52ba96b32c0bf5aa74995@macports.org> #15580: py25-ldap -------------------------------+-------------------------------------------- Reporter: akh at nobugware.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: ldap | -------------------------------+-------------------------------------------- There is no ldap for python 2.5 Here is a ports for py25-ldap based on py-ldap -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 12:21:47 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 19:21:47 -0000 Subject: [MacPorts] #15581: enhancement to cfitsio Portfile - v 3.08 and allow different Fortran compilers for wrappers Message-ID: <059.b240ecb43a783ad5263380a7d4c7112a@macports.org> #15581: enhancement to cfitsio Portfile - v 3.08 and allow different Fortran compilers for wrappers -------------------------------------+-------------------------------------- Reporter: davidh at ipac.caltech.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- This enhancement updates the version from 3.060 to 3.080, and allows selection of various Fortran compilers to produce wrappers via variants. No variant case has no Fortran wrappers. Variant possibilities for wrappers using various compilers: g77, g95, gfortran-mp-4.2 and gfortran-mp-4.3 No patch file changes - use the existing ones (patch-configure and patch- Makefile.in.diff) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 13:27:35 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 20:27:35 -0000 Subject: [MacPorts] #15554: gnome-terminal 2.22.1_0 Incompatible library version In-Reply-To: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> References: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> Message-ID: <063.006fb45998149a9e8a97b3c49f09cacd@macports.org> #15554: gnome-terminal 2.22.1_0 Incompatible library version ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by zweistein12 at gmx.de): No better, i have activate libpng @1.2.29_0, but gnome-terminal will not starting. The output {{{ $ gnome-terminal dyld: Library not loaded: /usr/X11/lib/libpng12.0.dylib Referenced from: /usr/X11/lib/libcairo.2.dylib Reason: Incompatible library version: libcairo.2.dylib requires version 27.0.0 or later, but libpng12.0.dylib provides version 25.0.0 Trace/BPT trap }}} The file /usr/X11/lib/libcairo.2.dylib is from OS X, or not? I am confused. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 13:47:03 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 20:47:03 -0000 Subject: [MacPorts] #15582: molden-4.6-8 crash when using z-matrix editor Message-ID: <065.1f0c380b6eea5d27a8c2d9b984977f6e@macports.org> #15582: molden-4.6-8 crash when using z-matrix editor -------------------------------------------+-------------------------------- Reporter: Vincent.Boudon at u-bourgogne.fr | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | -------------------------------------------+-------------------------------- I have installed molden 4.6 on my Mac Pro (Intel) under Mac OS X 10.5.3. I get a crash (Segmentation fault) when trying to add a line in the z-matrix editor. Any idea ? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 14:06:09 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 21:06:09 -0000 Subject: [MacPorts] #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries In-Reply-To: <057.7fcc3c931c496e6418828ef25649d574@macports.org> References: <057.7fcc3c931c496e6418828ef25649d574@macports.org> Message-ID: <066.905a9de6a5f00cbc19c0d440ba691ed0@macports.org> #15569: Use --x-includes and --x-libraries in certain ports to build against the 10.4u SDK X11 libraries ------------------------------------+--------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by david at bamsoftware.com): Replying to [comment:4 afb at macports.org]: > Hmm, this wasn't a problem before when everything used /usr/X11R6 for x11prefix but you are right in that it will be when using different ones for Leopard/Tiger... > > `/Developer/SDKs/MacOSX10.4u.sdk` should not be in the prefix, though. The reason it fails to link is because it couldn't find /usr/X11 in the Tiger installation. What about libXau? That's not on 10.4 anyway, right? It seems that linking against /usr/X11R6 on 10.5 makes the application incompatible with 10.4, while linking against the 10.4u SDK makes it compatible with both 10.4 and 10.5. I tried building another MacPorts installation in /opt/local-x11, configured as above except with {{{--with-x11-prefix=/usr/X11R6}}} (without this option the x11prefix will be /usr/X11). Without the included patch, cairo, pango, and xrender link against the libraries in /usr/X11: {{{ checking for X... libraries /usr/X11/lib, headers /usr/X11/include ... /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I. -I/opt/local-x11/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I/opt/local-x11/include -I/usr/X11/include -DX THREADS -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -mmac osx-version-min=10.4 -c Color.c -fno-common -DPIC -o .libs/Color.o }}} And things link against libXau: {{{ $ otool -L /opt/local-x11/lib/libXrender.dylib /opt/local-x11/lib/libXrender.dylib: /opt/local-x11/lib/libXrender.1.dylib (compatibility version 5.0.0, current version 5.0.0) /usr/X11/lib/libX11.6.dylib (compatibility version 9.0.0, current version 9.0.0) /usr/X11/lib/libXau.6.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/X11/lib/libXdmcp.6.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.0.0) }}} After uninstalling everything and applying the patch, libraries are found in /usr/X11R6: {{{ checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include ... /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I. -I/opt/local-x11/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I/opt/local-x11/include -I/usr/X11R6/include - DXTHREADS -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -mm acosx-version-min=10.4 -c Color.c -fno-common -DPIC -o .libs/Color.o }}} But things still link against libXau in /usr/X11: {{{ $ otool -L /opt/local-x11/lib/libXrender.dylib /opt/local-x11/lib/libXrender.dylib: /opt/local-x11/lib/libXrender.1.dylib (compatibility version 5.0.0, current version 5.0.0) /usr/X11/lib/libX11.6.dylib (compatibility version 9.0.0, current version 9.0.0) /usr/X11/lib/libXau.6.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/X11/lib/libXdmcp.6.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.0.0) }}} Additionally, I get this error, with or without the patch, so the build doesn't progress as far as gtk2: {{{ ld: warning, duplicate dylib /opt/local-x11/lib/libz.1.dylib ld: warning, duplicate dylib /opt/local-x11/lib/libiconv.2.dylib ld: cycle in dylib re-exports with /usr/X11/lib/libGL.dylib collect2: ld returned 1 exit status ld: warning, duplicate dylib /opt/local-x11/lib/libz.1.dylib ld: warning, duplicate dylib /opt/local-x11/lib/libiconv.2.dylib ld: cycle in dylib re-exports with /usr/X11/lib/libGL.dylib collect2: ld returned 1 exit status lipo: can't open input file: /var/tmp//ccSu2Oew.out (No such file or directory) make[4]: *** [libpangocairo-1.0.la] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Warning: the following items did not execute (for pango): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: The following dependencies failed to build: pango shared-mime-info libxml2 p5-xml-parser perl5.8 tiff Error: Status 1 encountered during processing. }}} So it seems that the universal_sysroot doesn't have an effect on where X11 headers and libraries are found? Sorry for the long reply. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 15:33:05 2008 From: noreply at macports.org (MacPorts) Date: Tue, 10 Jun 2008 22:33:05 -0000 Subject: [MacPorts] #15567: gcc43 update to 4.3.1 In-Reply-To: <052.34cc8f22177042fcd32ee91de5b44a16@macports.org> References: <052.34cc8f22177042fcd32ee91de5b44a16@macports.org> Message-ID: <061.20742a059f1a9935dbb627bffbf26881@macports.org> #15567: gcc43 update to 4.3.1 -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: mww at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gcc43 update -------------------------------+-------------------------------------------- Changes (by blb at macports.org): * status: new => closed * resolution: => fixed Comment: Closing since mww@ updated gcc43 in r37489. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 17:54:57 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 00:54:57 -0000 Subject: [MacPorts] #14707: Port Request: kmymoney2 In-Reply-To: <053.e51822307b118b38c522da100bc3dc28@macports.org> References: <053.e51822307b118b38c522da100bc3dc28@macports.org> Message-ID: <062.53b915bf1ad926fe2e94bc5ae354a2a6@macports.org> #14707: Port Request: kmymoney2 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: | Keywords: kmymoney --------------------------------+------------------------------------------- Comment (by ddimes at rogers.com): Attached Portfile for kmymyoney2. - kmymoney2 v0.8.9 - requires new gwenhywfar and aqbanking (newer than what is currently on macports) - online banking support using kmm_banking plugin I also have created Portfiles for aqbanking3, gwenhywfar3 and kmm_banking. Should I submit them separately or as part of this post? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 18:08:08 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 01:08:08 -0000 Subject: [MacPorts] #15583: GraphicsMagick | Error: Target org.macports.fetch returned: fetch failed | Error: Status 1 encountered during processing. Message-ID: <057.85536e52ffdb2529e9831a8ecf10ae2b@macports.org> #15583: GraphicsMagick | Error: Target org.macports.fetch returned: fetch failed | Error: Status 1 encountered during processing. -----------------------------------+---------------------------------------- Reporter: dwstclair at tellink.net | Owner: wsiegrist at apple.com Type: defect | Status: new Priority: High | Milestone: Component: server/hosting | Version: 1.6.0 Keywords: | -----------------------------------+---------------------------------------- $ sudo port install GraphicsMagick Password: ---> Fetching GraphicsMagick ---> Attempting to fetch GraphicsMagick-1.1.7.tar.bz2 from ftp://ftp.graphicsmagick.org/pub/GraphicsMagick/ ---> Attempting to fetch GraphicsMagick-1.1.7.tar.bz2 from http://downloads.sourceforge.net/GraphicsMagick ---> Attempting to fetch GraphicsMagick-1.1.7.tar.bz2 from http://easynews.dl.sourceforge.net/GraphicsMagick ---> Attempting to fetch GraphicsMagick-1.1.7.tar.bz2 from http://ufpr.dl.sourceforge.net/GraphicsMagick ---> Attempting to fetch GraphicsMagick-1.1.7.tar.bz2 from http://kent.dl.sourceforge.net/GraphicsMagick ---> Attempting to fetch GraphicsMagick-1.1.7.tar.bz2 from http://jaist.dl.sourceforge.net/GraphicsMagick ---> Attempting to fetch GraphicsMagick-1.1.7.tar.bz2 from http://svn.macports.org/repository/macports/distfiles/GraphicsMagick ---> Attempting to fetch GraphicsMagick-1.1.7.tar.bz2 from http://svn.macports.org/repository/macports/distfiles/general/ ---> Attempting to fetch GraphicsMagick-1.1.7.tar.bz2 from http://svn.macports.org/repository/macports/downloads/GraphicsMagick Error: Target org.macports.fetch returned: fetch failed Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 20:03:55 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 03:03:55 -0000 Subject: [MacPorts] #15584: nqc: universal variant doesn't work Message-ID: <059.05a6687783d6f1685250d37160520952@macports.org> #15584: nqc: universal variant doesn't work -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- nqc +universal builds without complaint, but the installed binaries end up just having the local architecture. MacPorts from trunk, Mac OS X 10.4.11 Intel, Xcode 2.4.1. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 20:10:11 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 03:10:11 -0000 Subject: [MacPorts] #14465: I can't build PostgreSQL 8.3 In-Reply-To: <056.aa924c6dd00ea719d14769cee7cbe9d8@macports.org> References: <056.aa924c6dd00ea719d14769cee7cbe9d8@macports.org> Message-ID: <065.1c9367e5e13c7399ef1de7e918dd3bb2@macports.org> #14465: I can't build PostgreSQL 8.3 -----------------------------------+---------------------------------------- Reporter: yannick at diablotin.fr | Owner: mww at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: PostgreSQL 8.3 build -----------------------------------+---------------------------------------- Changes (by mcalhoun at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #4559. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 20:10:27 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 03:10:27 -0000 Subject: [MacPorts] #4559: BUG: compile error when installing postgresql8 after unixODBC In-Reply-To: <057.c08e268892601f2c813c12a45d6c9dbc@macports.org> References: <057.c08e268892601f2c813c12a45d6c9dbc@macports.org> Message-ID: <066.d70ecabd1fd970dd1b34a36e518b60b8@macports.org> #4559: BUG: compile error when installing postgresql8 after unixODBC ------------------------------------+--------------------------------------- Reporter: erickt at dslextreme.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: ------------------------------------+--------------------------------------- Changes (by mcalhoun at macports.org): * cc: yannick at diablotin.fr, mcalhoun at macports.org (added) Comment: Duplicate of #14465. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 20:11:46 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 03:11:46 -0000 Subject: [MacPorts] #15583: GraphicsMagick | Error: Target org.macports.fetch returned: fetch failed | Error: Status 1 encountered during processing. In-Reply-To: <057.85536e52ffdb2529e9831a8ecf10ae2b@macports.org> References: <057.85536e52ffdb2529e9831a8ecf10ae2b@macports.org> Message-ID: <066.8fe3469b8fdf32289c0d75d8d6ec9a0c@macports.org> #15583: GraphicsMagick | Error: Target org.macports.fetch returned: fetch failed | Error: Status 1 encountered during processing. ------------------------------------+--------------------------------------- Reporter: dwstclair at tellink.net | Owner: wsiegrist at apple.com Type: defect | Status: new Priority: High | Milestone: Component: server/hosting | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by wsiegrist at apple.com): You can get the file off of [http://distfiles.macports.org/GraphicsMagick/GraphicsMagick-1.1.7.tar.bz2 out mirror]. This should happen automatically in a future release (or if you install from svn trunk). You would place the file in $prefix/var/macports/distfiles/GraphicsMagick/ and then re-run the "port install" command. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 20:12:54 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 03:12:54 -0000 Subject: [MacPorts] #4559: BUG: compile error when installing postgresql8 after unixODBC In-Reply-To: <057.c08e268892601f2c813c12a45d6c9dbc@macports.org> References: <057.c08e268892601f2c813c12a45d6c9dbc@macports.org> Message-ID: <066.3073e931c583d99dab518c1523d4371c@macports.org> #4559: BUG: compile error when installing postgresql8 after unixODBC ------------------------------------+--------------------------------------- Reporter: erickt at dslextreme.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by mcalhoun at macports.org): Attached is proposed fix to allow postgresql83 to be installed with unixODBC already installed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 20:14:31 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 03:14:31 -0000 Subject: [MacPorts] #15516: wakeonlan: turn off universal variant In-Reply-To: <059.eddbfe6f684989ff6b072b4d1e003000@macports.org> References: <059.eddbfe6f684989ff6b072b4d1e003000@macports.org> Message-ID: <068.6fedc36f4d1421cac1000c9faa536b94@macports.org> #15516: wakeonlan: turn off universal variant --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * cc: nox at macports.org (added) Comment: I see you have a different definition of universal than I did. :) Let's [http://lists.macosforge.org/pipermail/macports-dev/2008-June/005366.html discuss]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 20:42:22 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 03:42:22 -0000 Subject: [MacPorts] #15585: RFE: Allow qt4-mac and qt4-x11 to coexist Message-ID: <057.f2f2accabe278e8b34eeba449b24db40@macports.org> #15585: RFE: Allow qt4-mac and qt4-x11 to coexist -----------------------------------+---------------------------------------- Reporter: mcalhoun at macports.org | Owner: mcalhoun at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | -----------------------------------+---------------------------------------- As it stands now, qt4-mac and qt4-x11 can not both be installed. As far as I can tell, there is a conflict because of: 1. Same binary names in ${prefix}/bin 1. Same pkg-config files names in ${prefix}/lib/pkgconfig 1. Same library file names in ${prefix}/lib (only if the noframework variant is used). Two possible fixes are: * Install each package in ${prefix}/lib/${portname}, then create some sort of qt4-select port to create the appropriate links in ${prefix}/bin and ${prefix}/lib * Append -x11 or -mac to the offending files in ${prefix}/bin, ${prefix}/lib/pkgconfig, and ${prefix}/lib In either case, the ports which depend on qt4-{mac,x11} would have to be changed. [[BR]] Any there any other possibilities? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 20:42:22 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 03:42:22 -0000 Subject: [MacPorts] #15586: jruby-1.1.1 update to 1.1.2 Message-ID: <054.531a41e3eb40ff4acc641d68be7b01cf@macports.org> #15586: jruby-1.1.1 update to 1.1.2 --------------------------------+------------------------------------------- Reporter: jarias01 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: jruby update | --------------------------------+------------------------------------------- Update jruby port to the latest version 1.1.2. Attached is the patch for the update. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 21:05:25 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 04:05:25 -0000 Subject: [MacPorts] #15582: molden-4.6-8 crash when using z-matrix editor In-Reply-To: <065.1f0c380b6eea5d27a8c2d9b984977f6e@macports.org> References: <065.1f0c380b6eea5d27a8c2d9b984977f6e@macports.org> Message-ID: <074.334d56d5fe0ddf32a83803bd9cf66079@macports.org> #15582: molden-4.6-8 crash when using z-matrix editor --------------------------------------------+------------------------------- Reporter: Vincent.Boudon at u-bourgogne.fr | Owner: jochen at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------------+------------------------------- Changes (by jmr at macports.org): * cc: Vincent.Boudon at u-bourgogne.fr (removed) * owner: macports-tickets at lists.macosforge.org => jochen at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 21:07:50 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 04:07:50 -0000 Subject: [MacPorts] #15586: jruby-1.1.1 update to 1.1.2 In-Reply-To: <054.531a41e3eb40ff4acc641d68be7b01cf@macports.org> References: <054.531a41e3eb40ff4acc641d68be7b01cf@macports.org> Message-ID: <063.d877031f57df10c311b5139bfcf46e07@macports.org> #15586: jruby-1.1.1 update to 1.1.2 ---------------------------------+------------------------------------------ Reporter: jarias01 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: jruby update ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: ameingast at gmail.com (added) Comment: Cc maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 21:36:58 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 04:36:58 -0000 Subject: [MacPorts] #15451: cairo +universal doesn't build since 1.6.4 In-Reply-To: <059.4d4a94b03cd1e0d58d7b82a446d515eb@macports.org> References: <059.4d4a94b03cd1e0d58d7b82a446d515eb@macports.org> Message-ID: <068.673ebb1b2f34df26b894440b6eb1420a@macports.org> #15451: cairo +universal doesn't build since 1.6.4 --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): I [http://lists.cairographics.org/archives/cairo/2008-May/014073.html asked the cairo mailing list] about this. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 21:41:45 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 04:41:45 -0000 Subject: [MacPorts] #15570: Use ${universal.configure_*} in cairo and openssl In-Reply-To: <057.15e9a5bf63e48d150328d055fb145501@macports.org> References: <057.15e9a5bf63e48d150328d055fb145501@macports.org> Message-ID: <066.7af6b354ee03489620da300c19e2fafb@macports.org> #15570: Use ${universal.configure_*} in cairo and openssl ------------------------------------+--------------------------------------- Reporter: david at bamsoftware.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by ryandesign at macports.org): cairo doesn't build universal at this time anyway, so I'll leave that until #15451 is resolved. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Jun 10 22:29:27 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 05:29:27 -0000 Subject: [MacPorts] #15587: openmpi-1.2.6 failed to execute -- orted not found Message-ID: <056.9c22b2ed1bcf8960e602b4cf52e84c85@macports.org> #15587: openmpi-1.2.6 failed to execute -- orted not found ----------------------------------+----------------------------------------- Reporter: fuku at geo.bosai.go.jp | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: openmpu, orted | ----------------------------------+----------------------------------------- I installed openmpi @1.2.6_0+g95 using port command. Installation was successful. It works for single machine but it does not work for multiple machines. I am using the ssh connection through tcp/ip network. The error message said that [[BR]] {{{ bash: line 1: orted: command not found }}} It seems that "orted" command was called from openmpirun, but openmpirun could not find. The followings are the examples that I tested.[[BR]] {{{ # Single machine case host01 $ openmpirun -np 2 -host host01 echo `hostname` host01.example.com host01.example.com # Multiple machine case host01 $ openmpirun -np 2 -host host01,host02 echo `hostname` bash: line 1: orted: command not found [host01.example.com:01373] [0,0,0] ORTE_ERROR_LOG: Timeout in file /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/orte/mca/pls/base/pls_base_orted_cmds.c at line 275 [host01.example.com:01373] [0,0,0] ORTE_ERROR_LOG: Timeout in file /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/orte/mca/pls/rsh/pls_rsh_module.c at line 1166 [host01.example.com:01373] [0,0,0] ORTE_ERROR_LOG: Timeout in file /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/orte/mca/errmgr/hnp/errmgr_hnp.c at line 90 [host01.example.com:01373] ERROR: A daemon on node host02 failed to start as expected. [host01.example.com:01373] ERROR: There may be more information available from [host01.example.com:01373] ERROR: the remote shell (see above). [host01.example.com:01373] ERROR: The daemon exited unexpectedly with status 127. [host01.example.com:01373] [0,0,0] ORTE_ERROR_LOG: Timeout in file /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/orte/mca/pls/base/pls_base_orted_cmds.c at line 188 [host01.example.com:01373] [0,0,0] ORTE_ERROR_LOG: Timeout in file /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/orte/mca/pls/rsh/pls_rsh_module.c at line 1198 -------------------------------------------------------------------------- openmpirun was unable to cleanly terminate the daemons for this job. Returned value Timeout instead of ORTE_SUCCESS. -------------------------------------------------------------------------- }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 00:09:32 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 07:09:32 -0000 Subject: [MacPorts] #15587: openmpi-1.2.6 failed to execute -- orted not found In-Reply-To: <056.9c22b2ed1bcf8960e602b4cf52e84c85@macports.org> References: <056.9c22b2ed1bcf8960e602b4cf52e84c85@macports.org> Message-ID: <065.47729c371e6c0214c61de5a266f5ffa0@macports.org> #15587: openmpi-1.2.6 failed to execute -- orted not found -----------------------------------+---------------------------------------- Reporter: fuku at geo.bosai.go.jp | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: openmpu, orted -----------------------------------+---------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => mww at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 00:14:11 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 07:14:11 -0000 Subject: [MacPorts] #15554: gnome-terminal 2.22.1_0 Incompatible library version In-Reply-To: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> References: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> Message-ID: <063.6302a0ce2b45c8d0d085f9e0c2867661@macports.org> #15554: gnome-terminal 2.22.1_0 Incompatible library version ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by jmr at macports.org): Replying to [comment:5 zweistein12 at gmx.de]: > No better, i have activate libpng @1.2.29_0, but gnome-terminal will not starting. Hmm, did you rebuild gnome-terminal with the newer libpng version active? > The file /usr/X11/lib/libcairo.2.dylib is from OS X, or not? I am confused. Yes, everything in /usr/X11 is part of Apple's X11. Ports should not be linking against anything in there unless it is not available in /opt/local. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 00:30:39 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 07:30:39 -0000 Subject: [MacPorts] #15558: Provide quartz-only variant of cairo port In-Reply-To: <053.7dac91540fd2bde586d5852ccd3cd4a9@macports.org> References: <053.7dac91540fd2bde586d5852ccd3cd4a9@macports.org> Message-ID: <062.524c506665bbed858db5490eae26c908@macports.org> #15558: Provide quartz-only variant of cairo port --------------------------------+------------------------------------------- Reporter: macports at flyn.org | Owner: ryandesign at macports.org Type: enhancement | Status: new Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by ryandesign at macports.org): I wonder if we can roll this into the no_x11 variant. Or are there any cases where one would want the fontconfig backend but not the xlib backend? Hmm. FYI: The universal variant is not on by default and it has nothing to do with what cairo backends are enabled; see the [wiki:FAQ#IsMacPortsUniversal FAQ]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 00:36:40 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 07:36:40 -0000 Subject: [MacPorts] #15584: nqc: universal variant doesn't work In-Reply-To: <059.05a6687783d6f1685250d37160520952@macports.org> References: <059.05a6687783d6f1685250d37160520952@macports.org> Message-ID: <068.52a1f08a9ad80a4bd93a10990c18e9c1@macports.org> #15584: nqc: universal variant doesn't work --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): Turning the universal variant off for now in r37516 pending a solution which enables a universal build to actually work. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 00:40:55 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 07:40:55 -0000 Subject: [MacPorts] #15580: py25-ldap In-Reply-To: <053.d7ac7a8655f52ba96b32c0bf5aa74995@macports.org> References: <053.d7ac7a8655f52ba96b32c0bf5aa74995@macports.org> Message-ID: <062.306e5bc44a5577afea4a7bf5383990dd@macports.org> #15580: py25-ldap --------------------------------+------------------------------------------- Reporter: akh at nobugware.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: ldap --------------------------------+------------------------------------------- Comment (by akh at nobugware.com): Stability issue ? everything is working but sometimes got a {{{ python2.5(94260,0xb0081000) malloc: *** error for object 0x12c1aa0: Non- aligned pointer being freed (2) *** set a breakpoint in malloc_error_break to debug }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 00:57:08 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 07:57:08 -0000 Subject: [MacPorts] #15582: molden-4.6_8 crashes when using z-matrix editor In-Reply-To: <065.1f0c380b6eea5d27a8c2d9b984977f6e@macports.org> References: <065.1f0c380b6eea5d27a8c2d9b984977f6e@macports.org> Message-ID: <074.fc44921cb04222a75d59137079b5f09c@macports.org> #15582: molden-4.6_8 crashes when using z-matrix editor --------------------------------------------+------------------------------- Reporter: Vincent.Boudon at u-bourgogne.fr | Owner: jochen at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------------+------------------------------- Changes (by jochen at macports.org): * cc: schaft at cmbi.ru.nl (added) * summary: molden-4.6-8 crash when using z-matrix editor => molden-4.6_8 crashes when using z-matrix editor Comment: I can reproduce this. Has someone reported this upstreams to the molden developer? cc: G. Schaftenaar -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 01:30:47 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 08:30:47 -0000 Subject: [MacPorts] #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support Message-ID: <053.7451d91a1dd994541661e12818b467cc@macports.org> #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support -------------------------------+-------------------------------------------- Reporter: demianw at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: scipy arpack | -------------------------------+-------------------------------------------- Adding a variant in order to add ARPACK support. The model can be used in order to add variants to every sandbox module -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 01:56:45 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 08:56:45 -0000 Subject: [MacPorts] #15488: wrap text to terminal width In-Reply-To: <059.9e4a4ae2463c5332b97a21b21e298d1d@macports.org> References: <059.9e4a4ae2463c5332b97a21b21e298d1d@macports.org> Message-ID: <068.0623ad6bf30f6b1b42ceb968a645b4b9@macports.org> #15488: wrap text to terminal width --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): This works: {{{ $ port info zlib zlib @1.2.3, Revision 1 (archivers) Variants: examples, (+)universal zlib is designed to be a free, general-purpose, legally unencumbered, lossless data-compression library for use on virtually any computer hardware and operating system. Homepage: http://www.zlib.net/ Platforms: darwin, freebsd Maintainers: landonf at macports.org ryandesign at macports.org openmaintainer at macports.org $ }}} But this doesn't: {{{ $ echo zlib | xargs port info Warning: Unable to get terminal size, using 80x24! zlib @1.2.3, Revision 1 (archivers) can't read "env(COLUMNS)": no such variable while executing "set maxlen $env(COLUMNS)" (procedure "wrap" line 5) invoked from within "wrap $vars 0 [string repeat " " 13] 0" invoked from within "if {[llength $fields]} { # Show specific fields puts [join $fields $field_sep] } else { # If we weren't as..." ("uplevel" body line 130) invoked from within "uplevel 1 $block" (procedure "foreachport" line 16) invoked from within "foreachport $portlist { puts -nonewline $separator # If we have a url, use that, since it's most specific # otherwise try to m..." (procedure "action_info" line 8) invoked from within "$action_proc $action $portlist [array get global_options]" (procedure "process_cmd" line 86) invoked from within "process_cmd $remaining_args" invoked from within "if { [llength $remaining_args] > 0 } { # If there are remaining arguments, process those as a command # Exit immediately, by default, unless..." (file "/mp/bin/port" line 3165) Variants: $ }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 01:59:44 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 08:59:44 -0000 Subject: [MacPorts] #15495: openexr, ilmbase: enable parallel build In-Reply-To: <059.5e647ca5207bdd06e79246f51ae6a2b5@macports.org> References: <059.5e647ca5207bdd06e79246f51ae6a2b5@macports.org> Message-ID: <068.0659d4bd6305a85dcea690ee4794be03@macports.org> #15495: openexr, ilmbase: enable parallel build --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: No response from maintainer in > 72 hours so I committed the patch in r37518. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:03:07 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:03:07 -0000 Subject: [MacPorts] #15494: openexr's directory has wrong case In-Reply-To: <059.47cc283743d965c6fab18bc04c860dd7@macports.org> References: <059.47cc283743d965c6fab18bc04c860dd7@macports.org> Message-ID: <068.3587cdfc7a21eae268076025694237f4@macports.org> #15494: openexr's directory has wrong case --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: No response from maintainer in > 72 hours so I committed the fix in r37519. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:08:09 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:08:09 -0000 Subject: [MacPorts] #15493: ilmbase and openexr universal variants don't work right In-Reply-To: <059.ef3c8491d408a0eb0f14e6043b2554d7@macports.org> References: <059.ef3c8491d408a0eb0f14e6043b2554d7@macports.org> Message-ID: <068.ec4c39330679da7082a0eeacc5964599@macports.org> #15493: ilmbase and openexr universal variants don't work right --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: No response from maintainer in > 72 hours so I committed the patch for ilmbase in r37520 and for openexr in r37521. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:11:31 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:11:31 -0000 Subject: [MacPorts] #15480: mpfr: enable parallel build In-Reply-To: <059.26a0f9f6aec4892227e2ef9d355bb4ff@macports.org> References: <059.26a0f9f6aec4892227e2ef9d355bb4ff@macports.org> Message-ID: <068.5dfaaf41c5c851368748a7d89c732ef4@macports.org> #15480: mpfr: enable parallel build --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: vinc17 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed Comment: No response from maintainer in > 72 hours so I committed the patch in r37522. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:13:32 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:13:32 -0000 Subject: [MacPorts] #15332: ocaml: parallel build In-Reply-To: <059.850c091a01f920375fe60074748220da@macports.org> References: <059.850c091a01f920375fe60074748220da@macports.org> Message-ID: <068.8ec477c0272e64110fbb85ad2e09a310@macports.org> #15332: ocaml: parallel build --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: pguyot at kallisys.net Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): No response from maintainer in > 72 hours so I applied the diff in r37523 to explicitly show that the parallel build won't work. Upstream should still be consulted about whether this can be fixed in their sources. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:13:52 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:13:52 -0000 Subject: [MacPorts] #15332: ocaml: parallel build problem In-Reply-To: <059.850c091a01f920375fe60074748220da@macports.org> References: <059.850c091a01f920375fe60074748220da@macports.org> Message-ID: <068.3f95730f5b0b366ded84071dfef8f99e@macports.org> #15332: ocaml: parallel build problem --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: pguyot at kallisys.net Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * summary: ocaml: parallel build => ocaml: parallel build problem -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:27:09 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:27:09 -0000 Subject: [MacPorts] #13890: curlhandle 1.9_0 won't build because libcurl.a is a fat file In-Reply-To: <059.75dd8ab8b9a5082dfe0ec5eed03029ad@macports.org> References: <059.75dd8ab8b9a5082dfe0ec5eed03029ad@macports.org> Message-ID: <068.227b0f5f43ee1b62e22682368a38a3bf@macports.org> #13890: curlhandle 1.9_0 won't build because libcurl.a is a fat file --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): I found a note [http://www.cocoadev.com/index.pl?UniversalBinaryQuestions here] which says: To use the source presently available for CURLHandle, you need to upgrade the target, set it to universal, remove the script which tries to link to the static library, and remove the reference to the static curl library in the Other Linker Flags setting (in build settings). After that it should work. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:29:02 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:29:02 -0000 Subject: [MacPorts] #13890: curlhandle 1.9_0 won't build because libcurl.a is a fat file In-Reply-To: <059.75dd8ab8b9a5082dfe0ec5eed03029ad@macports.org> References: <059.75dd8ab8b9a5082dfe0ec5eed03029ad@macports.org> Message-ID: <068.f24d4bbe7090b010870c666eada8ca48@macports.org> #13890: curlhandle 1.9_0 won't build because libcurl.a is a fat file --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): There appears to be a binary and source code for a universal curlhandle [http://www.bleepsoft.com/node/10 here]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:32:22 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:32:22 -0000 Subject: [MacPorts] #13890: curlhandle 1.9_0 won't build because libcurl.a is a fat file In-Reply-To: <059.75dd8ab8b9a5082dfe0ec5eed03029ad@macports.org> References: <059.75dd8ab8b9a5082dfe0ec5eed03029ad@macports.org> Message-ID: <068.8a5ed34848e700e00cb6fa9762b8dab4@macports.org> #13890: curlhandle 1.9_0 won't build because libcurl.a is a fat file --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): Another source for a universal curlhandle is [http://rentzsch.com/trac/browser/trunk/cocoa/CURLHandle here]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:47:34 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:47:34 -0000 Subject: [MacPorts] #13343: grep 2.5.3_0 won't install; 2.5.1a_1 worked fine In-Reply-To: <059.26e9d6f63273749ba337454f75b8dc25@macports.org> References: <059.26e9d6f63273749ba337454f75b8dc25@macports.org> Message-ID: <068.77dbd779b812b2f9826184ac785a8953@macports.org> #13343: grep 2.5.3_0 won't install; 2.5.1a_1 worked fine --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by ryandesign at macports.org): Here's the [https://savannah.gnu.org/bugs/index.php?21939 upstream bug report] for this issue. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 02:59:55 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 09:59:55 -0000 Subject: [MacPorts] #13343: grep 2.5.3_0 won't install; 2.5.1a_1 worked fine In-Reply-To: <059.26e9d6f63273749ba337454f75b8dc25@macports.org> References: <059.26e9d6f63273749ba337454f75b8dc25@macports.org> Message-ID: <068.b38ed1a4af530b65659afe8445bc58eb@macports.org> #13343: grep 2.5.3_0 won't install; 2.5.1a_1 worked fine --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: waqar at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by ryandesign at macports.org): * status: assigned => closed * resolution: => fixed Comment: No response from maintainer in > 72 hours so I committed a fix for this in r37524. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 03:08:34 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 10:08:34 -0000 Subject: [MacPorts] #15462: rb-mysql 2.7.5_0 fails to build In-Reply-To: <052.a19676576318b50a151f79c697834bea@macports.org> References: <052.a19676576318b50a151f79c697834bea@macports.org> Message-ID: <061.7fb6e6c0fe8328b49048d388e950e778@macports.org> #15462: rb-mysql 2.7.5_0 fails to build -------------------------------+-------------------------------------------- Reporter: tyoshida at mac.com | Owner: febeling at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: rb-mysql -------------------------------+-------------------------------------------- Comment (by febeling at macports.org): Thanks for the additional info. I can't figure it out what might have caused the problem. But the new configuration phase is better than the old one anyway, and it seems to work everywhere, so I leave it at that. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 03:14:37 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 10:14:37 -0000 Subject: [MacPorts] #13946: tiff-3.8.2 +universal doesn't produce working binaries on PPC machines In-Reply-To: <056.dc83bb5129dcc2167a5bf2eac9f1defd@macports.org> References: <056.dc83bb5129dcc2167a5bf2eac9f1defd@macports.org> Message-ID: <065.20e602d0a96ab488f7eb68dcfc54ddcc@macports.org> #13946: tiff-3.8.2 +universal doesn't produce working binaries on PPC machines -----------------------------------+---------------------------------------- Reporter: dev at ultravelours.com | Owner: waqar at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: universal build failure -----------------------------------+---------------------------------------- Comment (by ryandesign at macports.org): I reported the problem to the [http://www.awaresystems.be/imaging/tiff/tml.html TIFF mailing list] on 2008-06-06 but cannot post a link to the specific message as it hasn't shown up in their archive yet. Bob Friesenhahn's response is that autoconf 2.62 includes universal binary fixes which may fix this problem without a need to change the TIFF source. I did test 4.0.0beta2 and it still has the problem (and is still fixed by the patch I committed). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 03:26:14 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 10:26:14 -0000 Subject: [MacPorts] #15297: pure, pure-devel: build failure on Leopard In-Reply-To: <057.9aee2802c38bc4486ad4e72f9959a17e@macports.org> References: <057.9aee2802c38bc4486ad4e72f9959a17e@macports.org> Message-ID: <066.a7b5352922507cccf4e1586cf6066769@macports.org> #15297: pure, pure-devel: build failure on Leopard ------------------------------------+--------------------------------------- Reporter: maggesi at math.unifi.it | Owner: ryandesign at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Comment (by ryandesign at macports.org): pure-devel was updated to 0.3.0.!r200 in r37500 and now builds on Leopard (and Tiger). pure cannot be updated to 0.3 right now because pure 0.3 does not build on Mac OS X. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 03:33:36 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 10:33:36 -0000 Subject: [MacPorts] #15574: freetds update to 0.82 In-Reply-To: <060.dad8ee5f426fed45bc8ecc58a36a1f45@macports.org> References: <060.dad8ee5f426fed45bc8ecc58a36a1f45@macports.org> Message-ID: <069.3c7f9281e891c186fb1c7f86028c25ed@macports.org> #15574: freetds update to 0.82 ---------------------------------------+------------------------------------ Reporter: mrich54907 at clearwire.net | Owner: ryandesign at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------+------------------------------------ Changes (by ryandesign at macports.org): * status: new => assigned * cc: nb at saltybanana.com (added) * summary: php5 5.2.6 Port error - Outdated source => freetds update to 0.82 * milestone: => Port Updates * owner: macports-tickets at lists.macosforge.org => ryandesign at macports.org * type: defect => enhancement Comment: Nathan Brazil had already posted [http://lists.macosforge.org/pipermail /macports-users/2008-June/010521.html a different update] to the portfile on macports-users. I was going to take a look at this. Thank you for the reminder. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 04:48:01 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 11:48:01 -0000 Subject: [MacPorts] #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support In-Reply-To: <053.7451d91a1dd994541661e12818b467cc@macports.org> References: <053.7451d91a1dd994541661e12818b467cc@macports.org> Message-ID: <062.dc15b36f4a34bcc7cd753ca06a64c3f1@macports.org> #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support --------------------------------+------------------------------------------- Reporter: demianw at gmail.com | Owner: ram at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: scipy arpack --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => ram at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 05:07:52 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 12:07:52 -0000 Subject: [MacPorts] #14707: Port Request: kmymoney2 In-Reply-To: <053.e51822307b118b38c522da100bc3dc28@macports.org> References: <053.e51822307b118b38c522da100bc3dc28@macports.org> Message-ID: <062.b84904c88bc1232cb5bde0d7753f6d64@macports.org> #14707: Port Request: kmymoney2 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: | Keywords: kmymoney --------------------------------+------------------------------------------- Comment (by raimue at macports.org): Please add them as separate tickets, but with reference to this one. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 06:12:44 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 13:12:44 -0000 Subject: [MacPorts] #15488: wrap text to terminal width In-Reply-To: <059.9e4a4ae2463c5332b97a21b21e298d1d@macports.org> References: <059.9e4a4ae2463c5332b97a21b21e298d1d@macports.org> Message-ID: <068.c6383257f15efdfd4675f7406c9e2334@macports.org> #15488: wrap text to terminal width --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by raimue at macports.org): Okay, I did a workaround in r37526. If no COLUMNS is in the environment (which happens when the input is not a tty), there is no line wrapping at all. I removed 80x24 as fallback, as this is not useful when using pipes. I don't know if there is a better way to fix it. Even if stdout is a tty, COLUMNS is not available in env and `stty size` only returns `stty: stdin isn't a terminal`. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 06:41:43 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 13:41:43 -0000 Subject: [MacPorts] #15589: Port Submission: aqbanking3 Message-ID: <053.33fe78bbb2bd45cd858cd8b4743b45b9@macports.org> #15589: Port Submission: aqbanking3 -------------------------------+-------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- Attached Portfile for aqbanking3. - aqbanking3 v3.4.2 - requires new gwenhywfar (newer than what is currently on macports) - port required for kmymoney2 (submitted on ticket #14707: Port Request: kmymoney2) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 06:47:09 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 13:47:09 -0000 Subject: [MacPorts] #15590: Port Submission: gwenhywfar3 Message-ID: <053.0f355a5e3ccc18a7c21684760654fc89@macports.org> #15590: Port Submission: gwenhywfar3 -------------------------------+-------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: gwenhywfar | -------------------------------+-------------------------------------------- Attached Portfile for gwenhywfar3. - gwenhywfar3 v3.3.2 - port required for aqbanking3 (submitted on ticket #15589: Port Submission: aqbanking3) - port indirect dependency for kmymoney2 (submitted on ticket #14707: Port Request: kmymoney2) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 06:50:05 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 13:50:05 -0000 Subject: [MacPorts] #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support In-Reply-To: <053.7451d91a1dd994541661e12818b467cc@macports.org> References: <053.7451d91a1dd994541661e12818b467cc@macports.org> Message-ID: <062.5733ea164055235ac1d1cd779bf50475@macports.org> #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support --------------------------------+------------------------------------------- Reporter: demianw at gmail.com | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: scipy arpack --------------------------------+------------------------------------------- Changes (by ram at macports.org): * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 06:51:33 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 13:51:33 -0000 Subject: [MacPorts] #15591: Port Submission: kmm_banking Message-ID: <053.f2226a1b4ce3ae6bdc8c5dfeae735b8f@macports.org> #15591: Port Submission: kmm_banking -----------------------------------+---------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: kmm_banking kmymoney2 | -----------------------------------+---------------------------------------- Attached Portfile for kmm_banking. - kmm_banking v0.9.7beta - this port requires aqbanking3 (submitted on ticket #15589: Port Submission: aqbanking3) - port used for kmymoney2 (submitted on ticket #14707: Port Request: kmymoney2) - enables online banking capability through aqbanking3 as a plugin -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 06:52:16 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 13:52:16 -0000 Subject: [MacPorts] #15589: Port Submission: aqbanking3 In-Reply-To: <053.33fe78bbb2bd45cd858cd8b4743b45b9@macports.org> References: <053.33fe78bbb2bd45cd858cd8b4743b45b9@macports.org> Message-ID: <062.5e72a61bff0d33cd87341475a64c7e8d@macports.org> #15589: Port Submission: aqbanking3 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by raimue at macports.org): * Is there a reason to make this aqbanking3 instead of just updating aqbanking? * Can the ports be installed at the same time? * Is aqbanking 3.x incompatible to aqbanking 2.x? * Do we have a port explicitely requiring aqbanking 2.x? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 06:55:45 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 13:55:45 -0000 Subject: [MacPorts] #14707: Port Request: kmymoney2 In-Reply-To: <053.e51822307b118b38c522da100bc3dc28@macports.org> References: <053.e51822307b118b38c522da100bc3dc28@macports.org> Message-ID: <062.61dc7e1a9107d7d1018727a8f5705996@macports.org> #14707: Port Request: kmymoney2 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: | Keywords: kmymoney --------------------------------+------------------------------------------- Comment (by ddimes at rogers.com): Port Submissions for aqbanking3, gwenhywfar3 and kmm_banking. aqbanking3 Ticket #15589: Port Submission: aqbanking3 gwenhywfar3 Ticket #15590: Port Submission: gwenhywfar3 kmm_banking Ticket #15591: Port Submission: kmm_banking -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 07:54:56 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 14:54:56 -0000 Subject: [MacPorts] #15589: Port Submission: aqbanking3 In-Reply-To: <053.33fe78bbb2bd45cd858cd8b4743b45b9@macports.org> References: <053.33fe78bbb2bd45cd858cd8b4743b45b9@macports.org> Message-ID: <062.23c237e2c525fcc84d1decd5cf6c3fb5@macports.org> #15589: Port Submission: aqbanking3 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by ddimes at rogers.com): Replying to [comment:1 raimue at macports.org]: > * Is there a reason to make this aqbanking3 instead of just updating aqbanking? > * Can the ports be installed at the same time? > * Is aqbanking 3.x incompatible to aqbanking 2.x? > * Do we have a port explicitely requiring aqbanking 2.x? Gnucash still requires aqbanking > 1.6.0 and < 2.9.0. - see source for details (http://svn.gnucash.org/trac/browser/gnucash/trunk/configure.in) The very latest aqbanking series 3.x.x is not source compatible to 2.x.x. I currently have both aqbanking 3.x.x and aqbanking 2.x.x installed. I will have to check to see if aqbanking 2.x.x is deactivated though. Port requiring aqbanking 3.x.x is kmm_banking which enables online banking for kmymoney2 - aqbanking 3.x.x also needs gwenhywfar 3.x.x as gwenhywfar 2.x.x is too old -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 08:12:46 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 15:12:46 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.24f0cd9071415f7d0cc29d6f0f70a326@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: ram at macports.org Type: enhancement | Status: reopened Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by ram at macports.org): Specifying the python binary to use with --python=${prefix}/bin/python will not point to a python executable if the user has not specified a python version using python_select. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 08:28:59 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 15:28:59 -0000 Subject: [MacPorts] #12330: BUG: GnuCash graphical reports drawn wrong In-Reply-To: <063.9be78a79edf87fe704a9828454e04a87@macports.org> References: <063.9be78a79edf87fe704a9828454e04a87@macports.org> Message-ID: <072.007e7f1d2b60ff65531f9782b569a3b4@macports.org> #12330: BUG: GnuCash graphical reports drawn wrong ------------------------------------------+--------------------------------- Reporter: glessard at tffenterprises.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: reopened Priority: High | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: gnucash graphics ------------------------------------------+--------------------------------- Changes (by glessard at tffenterprises.com): * status: closed => reopened * resolution: fixed => Comment: With the ports tree at revision 36929 (just after gnucash 2.2.5 made it in,) this still happens. This was built from scratch on a G4 machine. I attach screenshots of a pie chart report (the stock "Expense Piechart" report) and of a bar chart report (the stock "Average Balance" report.) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 10:24:47 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 17:24:47 -0000 Subject: [MacPorts] #12330: BUG: GnuCash graphical reports drawn wrong In-Reply-To: <063.9be78a79edf87fe704a9828454e04a87@macports.org> References: <063.9be78a79edf87fe704a9828454e04a87@macports.org> Message-ID: <072.157a8c873351f404a5148858faeed4a7@macports.org> #12330: BUG: GnuCash graphical reports drawn wrong ------------------------------------------+--------------------------------- Reporter: glessard at tffenterprises.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: reopened Priority: High | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: gnucash graphics ------------------------------------------+--------------------------------- Changes (by mas at macports.org): * cc: mas at macports.org (removed) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 11:24:04 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 18:24:04 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.cbe1930f521ade609e247da8954841b2@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: ram at macports.org Type: enhancement | Status: reopened Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by milosh at macports.org): Replying to [comment:8 ram at macports.org]: > Specifying the python binary to use with --python=${prefix}/bin/python will not point to a python executable if the user has not specified a python version using python_select. After installing python_select, {{{ % ls -l /opt/local/bin/python lrwxrwxrwx 1 11 2008-06-10 10:52 /opt/local/bin/python -> /usr/bin/python }}} This is enough for rubber to work. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 11:48:03 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 18:48:03 -0000 Subject: [MacPorts] #15477: tex/rubber: use python25 In-Reply-To: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> References: <052.a4698f50283078b0a1d7c490f2b0c5bf@macports.org> Message-ID: <061.1625ed1cd2b00e2dbfd7784887911470@macports.org> #15477: tex/rubber: use python25 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: ram at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: -------------------------------+-------------------------------------------- Changes (by ram at macports.org): * status: reopened => closed * resolution: => fixed Comment: Wow, python_select didn't do that last time I used it. Great! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 12:59:08 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 19:59:08 -0000 Subject: [MacPorts] #15592: gtk problems Message-ID: <058.ed94da142419dc0d52d02ed34845deb8@macports.org> #15592: gtk problems ------------------------------------+--------------------------------------- Reporter: jwilliams at hartford.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: gtk2 | ------------------------------------+--------------------------------------- I tried to install gtk2 and got this: sudo port install gtk2 ---> Verifying checksum(s) for atk Error: Target org.macports.checksum returned: Could not open file: /opt/local/var/macports/distfiles/atk/atk-1.22.0.tar.bz2 Error: The following dependencies failed to build: atk cairo fontconfig freetype libpixman libpng render xrender jpeg pango Xft2 xorg-xproto xorg- util-macros shared-mime-info libxml2 p5-xml-parser perl5.8 tiff Error: Status 1 encountered during processing. I tried cleaning and sync but no luck -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 14:43:18 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 21:43:18 -0000 Subject: [MacPorts] #15554: gnome-terminal 2.22.1_0 Incompatible library version In-Reply-To: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> References: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> Message-ID: <063.c249ea0355617adf8e9d648527d4b7df@macports.org> #15554: gnome-terminal 2.22.1_0 Incompatible library version ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by zweistein12 at gmx.de): I have install/uninstall gnome-terminal twice. But terminal does not start nevertheless. I have found a new command {{{ $ otool -L /opt/local/bin/gnome-terminal /opt/local/bin/gnome-terminal: /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices (compatibility version 1.0.0, current version 32.0.0) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices (compatibility version 1.0.0, current version 34.0.0) /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio (compatibility version 1.0.0, current version 1.0.0) /opt/local/lib/libglade-2.0.0.dylib (compatibility version 1.0.0, current version 1.7.0) /opt/local/lib/libgnomeui-2.0.dylib (compatibility version 2202.0.0, current version 2202.0.0) /opt/local/lib/libgio-2.0.0.dylib (compatibility version 1.0.0, current version 1.0.0) /opt/local/lib/libgnome-keyring.0.dylib (compatibility version 2.0.0, current version 2.1.0) /opt/local/lib/libbonoboui-2.0.dylib (compatibility version 1.0.0, current version 1.0.0) /opt/local/lib/libgnomecanvas-2.0.dylib (compatibility version 2002.0.0, current version 2002.0.0) /opt/local/lib/libgailutil.18.dylib (compatibility version 19.0.0, current version 19.1.0) /opt/local/lib/libart_lgpl_2.2.dylib (compatibility version 6.0.0, current version 6.20.0) /opt/local/lib/libgnome-2.0.dylib (compatibility version 2201.0.0, current version 2201.0.0) /opt/local/lib/libpopt.0.dylib (compatibility version 1.0.0, current version 1.0.0) /opt/local/lib/libgnomevfs-2.0.dylib (compatibility version 2201.0.0, current version 2201.0.0) /opt/local/lib/libxml2.2.dylib (compatibility version 9.0.0, current version 9.31.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.1.1) /opt/local/lib/libdbus-glib-1.2.dylib (compatibility version 4.0.0, current version 4.0.0) /opt/local/lib/libdbus-1.3.dylib (compatibility version 8.0.0, current version 8.0.0) /opt/local/lib/libssl.0.9.8.dylib (compatibility version 0.9.8, current version 0.9.8) /opt/local/lib/libcrypto.0.9.8.dylib (compatibility version 0.9.8, current version 0.9.8) /opt/local/lib/libesd.0.dylib (compatibility version 3.0.0, current version 3.38.0) /opt/local/lib/libbonobo-2.0.dylib (compatibility version 1.0.0, current version 1.0.0) /opt/local/lib/libgconf-2.4.dylib (compatibility version 6.0.0, current version 6.5.0) /opt/local/lib/libaudiofile.0.dylib (compatibility version 1.0.0, current version 1.2.0) /opt/local/lib/libbonobo-activation.4.dylib (compatibility version 5.0.0, current version 5.0.0) /opt/local/lib/libORBitCosNaming-2.0.dylib (compatibility version 2.0.0, current version 2.0.0) /opt/local/lib/libORBit-2.0.dylib (compatibility version 2.0.0, current version 2.0.0) /usr/lib/libresolv.9.dylib (compatibility version 1.0.0, current version 25.0.0) /opt/local/lib/libgthread-2.0.0.dylib (compatibility version 1601.0.0, current version 1601.3.0) /opt/local/lib/libstartup-notification-1.0.dylib (compatibility version 1.0.0, current version 1.0.0) /opt/local/lib/libvte.9.dylib (compatibility version 12.0.0, current version 12.17.0) /opt/local/lib/libncurses.5.dylib (compatibility version 5.0.0, current version 5.0.0) /opt/local/lib/libgtk-x11-2.0.0.dylib (compatibility version 1201.0.0, current version 1201.9.0) /opt/local/lib/libpangox-1.0.0.dylib (compatibility version 2003.0.0, current version 2003.1.0) /opt/local/lib/libgdk-x11-2.0.0.dylib (compatibility version 1201.0.0, current version 1201.9.0) /opt/local/lib/libatk-1.0.0.dylib (compatibility version 2210.0.0, current version 2210.1.0) /opt/local/lib/libgdk_pixbuf-2.0.0.dylib (compatibility version 1201.0.0, current version 1201.9.0) /opt/local/lib/libtiff.3.dylib (compatibility version 12.0.0, current version 12.2.0) /opt/local/lib/libjpeg.62.dylib (compatibility version 63.0.0, current version 63.0.0) /opt/local/lib/libpangocairo-1.0.0.dylib (compatibility version 2003.0.0, current version 2003.1.0) /opt/local/lib/libcairo.2.dylib (compatibility version 20.0.0, current version 20.5.0) /opt/local/lib/libpng12.0.dylib (compatibility version 30.0.0, current version 30.0.0) /opt/local/lib/libpixman-1.0.dylib (compatibility version 11.0.0, current version 11.0.0) /usr/X11/lib/libcairo.2.dylib (compatibility version 20.0.0, current version 20.5.0) /usr/X11/lib/libSM.6.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/X11/lib/libICE.6.dylib (compatibility version 10.0.0, current version 10.0.0) /usr/X11/lib/libpng12.0.dylib (compatibility version 25.0.0, current version 25.0.0) /usr/X11/lib/libpixman-1.0.dylib (compatibility version 11.0.0, current version 11.0.0) /usr/X11/lib/libXft.2.dylib (compatibility version 4.0.0, current version 4.2.0) /usr/X11/lib/libXrender.1.dylib (compatibility version 5.0.0, current version 5.0.0) /usr/X11/lib/libfontconfig.1.dylib (compatibility version 5.0.0, current version 5.0.0) /usr/lib/libiconv.2.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/lib/libexpat.1.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/X11/lib/libfreetype.6.dylib (compatibility version 10.0.0, current version 10.16.0) /opt/local/lib/libpangoxft-1.0.0.dylib (compatibility version 2003.0.0, current version 2003.1.0) /opt/local/lib/libpangoft2-1.0.0.dylib (compatibility version 2003.0.0, current version 2003.1.0) /opt/local/lib/libXft.2.dylib (compatibility version 4.0.0, current version 4.2.0) /opt/local/lib/libpango-1.0.0.dylib (compatibility version 2003.0.0, current version 2003.1.0) /opt/local/lib/libgobject-2.0.0.dylib (compatibility version 1601.0.0, current version 1601.3.0) /opt/local/lib/libgmodule-2.0.0.dylib (compatibility version 1601.0.0, current version 1601.3.0) /opt/local/lib/libglib-2.0.0.dylib (compatibility version 1601.0.0, current version 1601.3.0) /opt/local/lib/libintl.8.dylib (compatibility version 9.0.0, current version 9.2.0) /opt/local/lib/libXrender.1.dylib (compatibility version 5.0.0, current version 5.0.0) /usr/X11/lib/libX11.6.dylib (compatibility version 9.0.0, current version 9.0.0) /usr/X11/lib/libXau.6.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/X11/lib/libXdmcp.6.dylib (compatibility version 7.0.0, current version 7.0.0) /opt/local/lib/libfontconfig.1.dylib (compatibility version 5.0.0, current version 5.0.0) /opt/local/lib/libiconv.2.dylib (compatibility version 7.0.0, current version 7.0.0) /opt/local/lib/libexpat.1.dylib (compatibility version 7.0.0, current version 7.2.0) /opt/local/lib/libfreetype.6.dylib (compatibility version 10.0.0, current version 10.16.0) /opt/local/lib/libz.1.dylib (compatibility version 1.0.0, current version 1.2.3) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 14:59:06 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 21:59:06 -0000 Subject: [MacPorts] #15554: gnome-terminal 2.22.1_0 Incompatible library version In-Reply-To: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> References: <054.c57d64ccffa2f62c6fb7bf2c820e9fc2@macports.org> Message-ID: <063.3b9162a1c885a623d903b2f0e03e0c45@macports.org> #15554: gnome-terminal 2.22.1_0 Incompatible library version ---------------------------------+------------------------------------------ Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by jmr at macports.org): That's very strange. It's linking against libraries in /opt/local/lib, and also linking against some of the same libraries in /usr/X11/lib. The latter is almost certainly what's causing problems, but I'm afraid I have no idea why it's doing that. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 15:04:36 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 22:04:36 -0000 Subject: [MacPorts] #15593: UPDATE: Supybot-0.83.3 Message-ID: <051.f45c3e391227a42643a4580e9ac5c984@macports.org> #15593: UPDATE: Supybot-0.83.3 -----------------------------+---------------------------------------------- Reporter: brian at matzon.dk | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: update | -----------------------------+---------------------------------------------- update supybot to 0.83.3 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 15:13:48 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 22:13:48 -0000 Subject: [MacPorts] #15592: atk problems In-Reply-To: <058.ed94da142419dc0d52d02ed34845deb8@macports.org> References: <058.ed94da142419dc0d52d02ed34845deb8@macports.org> Message-ID: <067.51c557280627ded4923ca7f4b179736b@macports.org> #15592: atk problems -------------------------------------+-------------------------------------- Reporter: jwilliams at hartford.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: gtk2 -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * summary: gtk problems => atk problems Comment: When you say you tried cleaning, do you mean you ran `sudo port clean --all atk`? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 16:06:06 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 23:06:06 -0000 Subject: [MacPorts] #15594: sox 14.0.1 upgrade Message-ID: <054.e9f62148577d1870e201822dbde1d872@macports.org> #15594: sox 14.0.1 upgrade --------------------------------+------------------------------------------- Reporter: jcushman at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: sox | --------------------------------+------------------------------------------- It would be great if there was a portfile for sox 14.0.1 -- the current version supported is 12.18.2. 14 supports a feature I would like (the tempo filter). Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 16:57:14 2008 From: noreply at macports.org (MacPorts) Date: Wed, 11 Jun 2008 23:57:14 -0000 Subject: [MacPorts] #12330: BUG: GnuCash graphical reports drawn wrong In-Reply-To: <063.9be78a79edf87fe704a9828454e04a87@macports.org> References: <063.9be78a79edf87fe704a9828454e04a87@macports.org> Message-ID: <072.d1425cfeb2c23a868fa50a5efc1abd82@macports.org> #12330: BUG: GnuCash graphical reports drawn wrong ------------------------------------------+--------------------------------- Reporter: glessard at tffenterprises.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: reopened Priority: High | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: gnucash graphics ------------------------------------------+--------------------------------- Comment (by mp at dpj.sent.com): Reports look fine for me on 10.5.3 intel. Perhaps you should ask on the gnucash list? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 17:41:05 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 00:41:05 -0000 Subject: [MacPorts] #12330: BUG: GnuCash graphical reports drawn wrong In-Reply-To: <063.9be78a79edf87fe704a9828454e04a87@macports.org> References: <063.9be78a79edf87fe704a9828454e04a87@macports.org> Message-ID: <072.17e744aff2ee23a27af5f7405a024913@macports.org> #12330: BUG: GnuCash graphical reports drawn wrong ------------------------------------------+--------------------------------- Reporter: glessard at tffenterprises.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: reopened Priority: High | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: gnucash graphics ------------------------------------------+--------------------------------- Comment (by glessard at tffenterprises.com): Replying to [comment:7 mp at dpj.sent.com]: > Reports look fine for me on 10.5.3 intel. Perhaps you should ask on the gnucash list? The fink build is fine. It's definitely a macports problem. From what you say, it might be PPC-specific. Anyone with a G5 can test this? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 19:28:33 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 02:28:33 -0000 Subject: [MacPorts] #15281: request to support libsgml In-Reply-To: <053.ab96139ac9d9e15a104366658f28e189@macports.org> References: <053.ab96139ac9d9e15a104366658f28e189@macports.org> Message-ID: <062.e0ac8d76fe53314e042f0bda5886ae3e@macports.org> #15281: request to support libsgml --------------------------------+------------------------------------------- Reporter: steve at dekorte.com | Owner: simon at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Requests Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by trac.macports.org at elliottcable.com): It doesn't seem to work for me: http://pastie.org/213413 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 20:14:40 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 03:14:40 -0000 Subject: [MacPorts] #15589: Port Submission: aqbanking3 In-Reply-To: <053.33fe78bbb2bd45cd858cd8b4743b45b9@macports.org> References: <053.33fe78bbb2bd45cd858cd8b4743b45b9@macports.org> Message-ID: <062.c79454954ff046856c424a8678cd0ff9@macports.org> #15589: Port Submission: aqbanking3 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by ddimes at rogers.com): I just verified with my installed ports.[[BR]] Both aqbanking 2.3.3 and aqbanking3 3.4.2 are installed at the same time.[[BR]] Currently, aqbanking 2.3.3 is deactivated. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 20:23:21 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 03:23:21 -0000 Subject: [MacPorts] #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support In-Reply-To: <053.7451d91a1dd994541661e12818b467cc@macports.org> References: <053.7451d91a1dd994541661e12818b467cc@macports.org> Message-ID: <062.cacd373299b16eddda9f2920d67530ef@macports.org> #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support --------------------------------+------------------------------------------- Reporter: demianw at gmail.com | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: scipy arpack --------------------------------+------------------------------------------- Comment (by ram at macports.org): After building with the +arpack variant the test suite fails with a Bus Error on Intel Leopard for me, whereas without the +arpack variant it succeeds. What platform are you running and does the test suite pass for you with the +arpack variant? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 20:44:35 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 03:44:35 -0000 Subject: [MacPorts] #15589: Port Submission: aqbanking3 In-Reply-To: <053.33fe78bbb2bd45cd858cd8b4743b45b9@macports.org> References: <053.33fe78bbb2bd45cd858cd8b4743b45b9@macports.org> Message-ID: <062.6e5be5b3a40258a94bb373cb18d6aeb3@macports.org> #15589: Port Submission: aqbanking3 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by ddimes at rogers.com): Attached new Portfile for aqbanking3. - aqbanking3 v3.5.0 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 20:47:00 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 03:47:00 -0000 Subject: [MacPorts] #15590: Port Submission: gwenhywfar3 In-Reply-To: <053.0f355a5e3ccc18a7c21684760654fc89@macports.org> References: <053.0f355a5e3ccc18a7c21684760654fc89@macports.org> Message-ID: <062.1d576fbb2f2f929b4fcac315070a1db6@macports.org> #15590: Port Submission: gwenhywfar3 --------------------------------+------------------------------------------- Reporter: ddimes at rogers.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: gwenhywfar --------------------------------+------------------------------------------- Comment (by ddimes at rogers.com): Attached newer Portfile for gwenhywfar3. - gwenhywfar3 v3.3.3 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 22:21:18 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 05:21:18 -0000 Subject: [MacPorts] #15556: cairo 1.6.4 build fails on panther os x 10.3.9 In-Reply-To: <050.c94ef41e0752b39919ff8bbc346f9caa@macports.org> References: <050.c94ef41e0752b39919ff8bbc346f9caa@macports.org> Message-ID: <059.a9ca9150d30b00f2ff58967f561bc8c5@macports.org> #15556: cairo 1.6.4 build fails on panther os x 10.3.9 -----------------------------+---------------------------------------------- Reporter: north at znet.com | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: cairo 1.6.4 fail -----------------------------+---------------------------------------------- Changes (by ryandesign at macports.org): * status: assigned => closed * resolution: => fixed Comment: In a response to my email on the cairo list, Vladimir Vukicevic says "Pretty much all the Quartz backends require at least a recent 10.4.x. The needed methods to render using Quartz just aren't there" so I disabled the Quartz backends in 10.3.x and earlier in r37536. Now cairo builds on 10.3.9. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 22:21:29 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 05:21:29 -0000 Subject: [MacPorts] #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support In-Reply-To: <053.7451d91a1dd994541661e12818b467cc@macports.org> References: <053.7451d91a1dd994541661e12818b467cc@macports.org> Message-ID: <062.00e4f47df1b81680256e21b42fde5e14@macports.org> #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support --------------------------------+------------------------------------------- Reporter: demianw at gmail.com | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: scipy arpack --------------------------------+------------------------------------------- Comment (by ram at macports.org): Another question; are you using the default gcc43 fortran compiler variant, or gcc42? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Jun 11 23:37:00 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 06:37:00 -0000 Subject: [MacPorts] #15556: cairo 1.6.4 build fails on panther os x 10.3.9 In-Reply-To: <050.c94ef41e0752b39919ff8bbc346f9caa@macports.org> References: <050.c94ef41e0752b39919ff8bbc346f9caa@macports.org> Message-ID: <059.45e2a74953579a7d48cd5b1ebda9b985@macports.org> #15556: cairo 1.6.4 build fails on panther os x 10.3.9 -----------------------------+---------------------------------------------- Reporter: north at znet.com | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: cairo 1.6.4 fail -----------------------------+---------------------------------------------- Comment (by north at znet.com): Build works for me now. Thank you very much! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 06:42:44 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 13:42:44 -0000 Subject: [MacPorts] #15594: sox 14.0.1 upgrade In-Reply-To: <054.e9f62148577d1870e201822dbde1d872@macports.org> References: <054.e9f62148577d1870e201822dbde1d872@macports.org> Message-ID: <063.ae87e1be566b2ccb5b526fb9c4f215dd@macports.org> #15594: sox 14.0.1 upgrade ---------------------------------+------------------------------------------ Reporter: jcushman at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: sox ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 06:45:51 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 13:45:51 -0000 Subject: [MacPorts] #15594: sox 14.0.1 upgrade In-Reply-To: <054.e9f62148577d1870e201822dbde1d872@macports.org> References: <054.e9f62148577d1870e201822dbde1d872@macports.org> Message-ID: <063.819de17ae148878df24c0117c1493576@macports.org> #15594: sox 14.0.1 upgrade ---------------------------------+------------------------------------------ Reporter: jcushman at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: sox ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Updated in r37545. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 07:27:18 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 14:27:18 -0000 Subject: [MacPorts] #15281: request to support libsgml In-Reply-To: <053.ab96139ac9d9e15a104366658f28e189@macports.org> References: <053.ab96139ac9d9e15a104366658f28e189@macports.org> Message-ID: <062.311dee39705e08647d77883bb6a3b02c@macports.org> #15281: request to support libsgml --------------------------------+------------------------------------------- Reporter: steve at dekorte.com | Owner: simon at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Requests Component: ports | Version: Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by steve at dekorte.com): I get the same error: StevesLaptop-2:io steve$ sudo port install libsgml Password: ---> Staging libsgml into destroot Error: Target org.macports.destroot returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/libsgml-1.1.4" && make install DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot " returned error 2 Command output: install -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml install include/DomComment.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/DomComment.h install include/DomDocument.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/DomDocument.h install include/DomElement.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/DomElement.h install include/DomNode.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/DomNode.h install include/DomNodeList.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/DomNodeList.h install include/DomText.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/DomText.h install include/SgmlParser.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/SgmlParser.h install include/SgmlExtensionHtml.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/SgmlExtensionHtml.h install include/SgmlExtensionXml.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/SgmlExtensionXml.h install include/libsgml.h /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/include/sgml/libsgml.h install libsgml.a /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/lib/libsgml.a install libsgml.dylib /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libsgml/work/destroot/opt/local/lib/libsgml.dylib install: libsgml.dylib: No such file or directory make: *** [install] Error 71 Error: Status 1 encountered during processing. StevesLaptop-2:io steve$ -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 07:35:04 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 14:35:04 -0000 Subject: [MacPorts] #15595: mlterm 2.9.2 build error Message-ID: <053.50c1419ae9ca58641416f8172d0b834f@macports.org> #15595: mlterm 2.9.2 build error -----------------------------------------------------------------------------+ Reporter: itabtabai at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: mlterm 2.9.2 kik_str.h:53: error: syntax error before '*' token | -----------------------------------------------------------------------------+ I've tried compiling mlterm port with variants and was unsuccessful. So I tried to compile with only the +bidi, still not successful. The build log: I have a macmini with leopard and x code3. {{{ # port -d install mlterm +bidi . . . Mlterm was configured as follows Installation path prefix : /opt/local Build shared libraries : yes Build static libraries : yes Optimization for redrawing a line : no BiDi rendering (Fribidi) : yes ISCII rendering (libind) : no External tools : mlclient mlcc Image library : utmp support : no Type engines : xcore DnD : yes Input Methods : XIM kbd Scrollbars : simple sample extra ---> Building mlterm with target all . . . /usr/bin/gcc-4.0 -O2 -I/opt/local/include -I. -c kik_pty_streams.c -fno- common -DPIC -o .libs/kik_pty_streams.lo In file included from kik_pty_streams.c:38: kik_str.h:53: error: syntax error before '*' token kik_str.h:59: error: syntax error before '*' token kik_str.h:63: error: syntax error before '*' token kik_pty_streams.c: In function 'kik_pty_fork': kik_pty_streams.c:102: error: 'O_NDELAY' undeclared (first use in this function) kik_pty_streams.c:102: error: (Each undeclared identifier is reported only once kik_pty_streams.c:102: error: for each function it appears in.) kik_pty_streams.c:133: error: 'CEOF' undeclared (first use in this function) kik_pty_streams.c:135: error: 'CERASE' undeclared (first use in this function) kik_pty_streams.c:136: error: 'CINTR' undeclared (first use in this function) kik_pty_streams.c:137: error: 'CKILL' undeclared (first use in this function) kik_pty_streams.c:138: error: 'CQUIT' undeclared (first use in this function) kik_pty_streams.c:139: error: 'CSTART' undeclared (first use in this function) kik_pty_streams.c:140: error: 'CSTOP' undeclared (first use in this function) kik_pty_streams.c:141: error: 'CSUSP' undeclared (first use in this function) make[2]: *** [kik_pty_streams.o] Error 1 make[1]: *** [all] Error 2 make: *** [all] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_mlterm/work/mlterm-2.9.2" && make all " returned error 2 Command output: /usr/bin/gcc-4.0 -O2 -I/opt/local/include -I. -c kik_unistd.c -fno-common -DPIC -o .libs/kik_unistd.lo /usr/bin/gcc-4.0 -O2 -I/opt/local/include -I. -c kik_unistd.c -o kik_unistd.o >/dev/null 2>&1 mv -f .libs/kik_unistd.lo kik_unistd.lo ../libtool --mode=compile /usr/bin/gcc-4.0 -O2 -I/opt/local/include -I. -c kik_sig_child.c rm -f .libs/kik_sig_child.lo /usr/bin/gcc-4.0 -O2 -I/opt/local/include -I. -c kik_sig_child.c -fno- common -DPIC -o .libs/kik_sig_child.lo /usr/bin/gcc-4.0 -O2 -I/opt/local/include -I. -c kik_sig_child.c -o kik_sig_child.o >/dev/null 2>&1 mv -f .libs/kik_sig_child.lo kik_sig_child.lo ../libtool --mode=compile /usr/bin/gcc-4.0 -O2 -I/opt/local/include -I. -c kik_pty_streams.c rm -f .libs/kik_pty_streams.lo /usr/bin/gcc-4.0 -O2 -I/opt/local/include -I. -c kik_pty_streams.c -fno- common -DPIC -o .libs/kik_pty_streams.lo In file included from kik_pty_streams.c:38: kik_str.h:53: error: syntax error before '*' token kik_str.h:59: error: syntax error before '*' token kik_str.h:63: error: syntax error before '*' token kik_pty_streams.c: In function 'kik_pty_fork': kik_pty_streams.c:102: error: 'O_NDELAY' undeclared (first use in this function) kik_pty_streams.c:102: error: (Each undeclared identifier is reported only once kik_pty_streams.c:102: error: for each function it appears in.) kik_pty_streams.c:133: error: 'CEOF' undeclared (first use in this function) kik_pty_streams.c:135: error: 'CERASE' undeclared (first use in this function) kik_pty_streams.c:136: error: 'CINTR' undeclared (first use in this function) kik_pty_streams.c:137: error: 'CKILL' undeclared (first use in this function) kik_pty_streams.c:138: error: 'CQUIT' undeclared (first use in this function) kik_pty_streams.c:139: error: 'CSTART' undeclared (first use in this function) kik_pty_streams.c:140: error: 'CSTOP' undeclared (first use in this function) kik_pty_streams.c:141: error: 'CSUSP' undeclared (first use in this function) make[2]: *** [kik_pty_streams.o] Error 1 make[1]: *** [all] Error 2 make: *** [all] Error 2 Warning: the following items did not execute (for mlterm): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. }}} I hope the above helps. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 09:03:31 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 16:03:31 -0000 Subject: [MacPorts] #15596: Portfile and patches for ruby net::geoip module Message-ID: <051.366294dccfbf4cd326a800db15af590c@macports.org> #15596: Portfile and patches for ruby net::geoip module -----------------------------+---------------------------------------------- Reporter: kykim at yahoo.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: ruby libgeoip | -----------------------------+---------------------------------------------- Port file for ruby module to libgeoip port -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 11:28:07 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 18:28:07 -0000 Subject: [MacPorts] #15597: dvd::rip New portfile Message-ID: <054.93cc647a567635bd4f002a578a2fdd66@macports.org> #15597: dvd::rip New portfile --------------------------------+------------------------------------------- Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: dvdrip dvd::rip | --------------------------------+------------------------------------------- I have a new Portfile for dvd::rip (http://www2.exit1.org/dvdrip/) attached. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 12:12:25 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 19:12:25 -0000 Subject: [MacPorts] #15526: error installing rb-rubygems on Leopard 10.5.3 In-Reply-To: <055.1569bbbb58e38d45057841d81df7de00@macports.org> References: <055.1569bbbb58e38d45057841d81df7de00@macports.org> Message-ID: <064.f629a9ea798969a3d8f304bce5e0366f@macports.org> #15526: error installing rb-rubygems on Leopard 10.5.3 ----------------------------------+----------------------------------------- Reporter: bobby.carbn at mac.com | Owner: mr_bond at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: 10.5.3 metaslpoit3 rb-rails ----------------------------------+----------------------------------------- Comment (by mr_bond at macports.org): 'socket' is a native ruby library, I don't actually think this is a issue with the rb-rubygems package. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 13:18:07 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 20:18:07 -0000 Subject: [MacPorts] #15526: error installing rb-rubygems on Leopard 10.5.3 In-Reply-To: <055.1569bbbb58e38d45057841d81df7de00@macports.org> References: <055.1569bbbb58e38d45057841d81df7de00@macports.org> Message-ID: <064.a19e07aba215ef4071a7530c885b6976@macports.org> #15526: error installing rb-rubygems on Leopard 10.5.3 ----------------------------------+----------------------------------------- Reporter: bobby.carbn at mac.com | Owner: pguyot at kallisys.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: 10.5.3 metaslpoit3 rb-rails ----------------------------------+----------------------------------------- Changes (by mr_bond at macports.org): * owner: mr_bond at macports.org => pguyot at kallisys.net Comment: what do you think, maintainer of ruby? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 13:24:22 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 20:24:22 -0000 Subject: [MacPorts] #15598: ndesk-dbus New portfile Message-ID: <054.370e4fcd5644924bd645cee2b38219dc@macports.org> #15598: ndesk-dbus New portfile --------------------------------+------------------------------------------- Reporter: zweistein12 at gmx.de | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: ndesk-dbus | --------------------------------+------------------------------------------- I have a new Portfile for ndesk-dbus (http://www.ndesk.org/DBusSharp) attached. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 14:47:44 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 21:47:44 -0000 Subject: [MacPorts] #15599: Sox gsm.c compile error Message-ID: <053.53009082048d8a2e656d48f4a8c48281@macports.org> #15599: Sox gsm.c compile error -------------------------------+-------------------------------------------- Reporter: steve at dekorte.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- $ port MacPorts 1.600 $ sudo port install sox ---> Fetching libid3tag ---> Attempting to fetch libid3tag-0.15.1b.tar.gz from ftp://ftp.mars.org/pub/mpeg/ ---> Verifying checksum(s) for libid3tag ---> Extracting libid3tag ---> Configuring libid3tag ---> Building libid3tag with target all ---> Staging libid3tag into destroot ---> Installing libid3tag 0.15.1b_0 ---> Activating libid3tag 0.15.1b_0 ---> Cleaning libid3tag ---> Fetching sox ---> Attempting to fetch sox-14.0.1.tar.gz from http://downloads.sourceforge.net/sox ---> Verifying checksum(s) for sox ---> Extracting sox ---> Configuring sox ---> Building sox with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_sox/work/sox-14.0.1" && make all " returned error 2 Command output: gsm.c:161: error: dereferencing pointer to incomplete type gsm.c:161: error: dereferencing pointer to incomplete type gsm.c:162: error: dereferencing pointer to incomplete type gsm.c:164: error: dereferencing pointer to incomplete type gsm.c:167: error: 'gsp' undeclared (first use in this function) gsm.c:169: error: dereferencing pointer to incomplete type gsm.c:174: warning: implicit declaration of function 'gsm_encode' gsm.c:174: error: dereferencing pointer to incomplete type gsm.c:174: error: dereferencing pointer to incomplete type gsm.c:175: error: dereferencing pointer to incomplete type gsm.c:182: error: dereferencing pointer to incomplete type gsm.c:182: error: dereferencing pointer to incomplete type gsm.c: In function 'sox_gsmwrite': gsm.c:194: error: dereferencing pointer to incomplete type gsm.c:194: error: dereferencing pointer to incomplete type gsm.c:195: error: dereferencing pointer to incomplete type gsm.c:198: error: dereferencing pointer to incomplete type gsm.c:198: error: dereferencing pointer to incomplete type gsm.c: In function 'sox_gsmstopread': gsm.c:215: error: dereferencing pointer to incomplete type gsm.c:216: warning: implicit declaration of function 'gsm_destroy' gsm.c:216: error: dereferencing pointer to incomplete type gsm.c:218: error: dereferencing pointer to incomplete type gsm.c:219: error: dereferencing pointer to incomplete type gsm.c: In function 'sox_gsmstopwrite': gsm.c:228: error: dereferencing pointer to incomplete type gsm.c:228: error: dereferencing pointer to incomplete type make[2]: *** [gsm.lo] Error 1 make[1]: *** [all] Error 2 make: *** [all-recursive] Error 1 Error: Status 1 encountered during processing. StevesLaptop-2:io steve$ -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 14:51:17 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 21:51:17 -0000 Subject: [MacPorts] #13000: wine build incompatible with iPhone SDK In-Reply-To: <054.659e1ffdfbecfef56c70462228d4728a@macports.org> References: <054.659e1ffdfbecfef56c70462228d4728a@macports.org> Message-ID: <063.fb3629919764acce65e17f9aa48ecad0@macports.org> #13000: wine build incompatible with iPhone SDK ---------------------------------+------------------------------------------ Reporter: tannhaus at gmail.com | Owner: ryandesign at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by Gordon.Child at gmail.com): Issue still exists in the latest version of iPhone SDK. WWDC08/beta 7 sdk. tried install after a port clean --work wine. Still error'd. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 15:40:41 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 22:40:41 -0000 Subject: [MacPorts] #15536: New Port p5-string-shellquote In-Reply-To: <053.b47a9a2ac3a28f1161d37f825780c439@macports.org> References: <053.b47a9a2ac3a28f1161d37f825780c439@macports.org> Message-ID: <062.aae17ca84d8d96b81745c69a66bf1562@macports.org> #15536: New Port p5-string-shellquote --------------------------------+------------------------------------------- Reporter: hagedorn at tcnj.edu | Owner: raimue at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: perl, string, shellquote --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: assigned => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 16:52:27 2008 From: noreply at macports.org (MacPorts) Date: Thu, 12 Jun 2008 23:52:27 -0000 Subject: [MacPorts] #15526: error installing rb-rubygems on Leopard 10.5.3 In-Reply-To: <055.1569bbbb58e38d45057841d81df7de00@macports.org> References: <055.1569bbbb58e38d45057841d81df7de00@macports.org> Message-ID: <064.a6dafd593cfc78851ccce2d1c9607e2a@macports.org> #15526: error installing rb-rubygems on Leopard 10.5.3 ----------------------------------+----------------------------------------- Reporter: bobby.carbn at mac.com | Owner: pguyot at kallisys.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: 10.5.3 metaslpoit3 rb-rails ----------------------------------+----------------------------------------- Comment (by raimue at macports.org): This might be related to #15528. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 17:07:10 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 00:07:10 -0000 Subject: [MacPorts] #14426: VTK5 - update to 5.0.4 In-Reply-To: <056.426e4dd3d1915b8091d6feaa048cf082@macports.org> References: <056.426e4dd3d1915b8091d6feaa048cf082@macports.org> Message-ID: <065.2279c040ebd96ee5810fed8c64a27247@macports.org> #14426: VTK5 - update to 5.0.4 -----------------------------------+---------------------------------------- Reporter: andrew at fernandes.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: -----------------------------------+---------------------------------------- Comment (by ajb78 at cornell.edu): > There do appear to be some funky loading issues with dyld load names. My internal version attempts to rename internal/load names and dirs... but doesn't seem to work, and I haven't figured it out... preloading the libs makes the problem go away... but I can't find any load chain that isn't correctly referenced. > > Grumble. Too many *nix people not realizing that shared objects may have absolute paths... I just uploaded a modified version of your port file (I am very new to this so bear with me), I took a look at the fink info file and merged in the relevant changes (including their patch file) in order to get the dynamic libraries loading properly. It now seems to work for me (at least with Cocoa settings). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 17:07:32 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 00:07:32 -0000 Subject: [MacPorts] #15488: wrap text to terminal width In-Reply-To: <059.9e4a4ae2463c5332b97a21b21e298d1d@macports.org> References: <059.9e4a4ae2463c5332b97a21b21e298d1d@macports.org> Message-ID: <068.96b4cf685807779882b89b289f906e06@macports.org> #15488: wrap text to terminal width --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by raimue at macports.org): `stty -f /dev/stdout size` could be a possible solution. Also, I should look into adding a wrapper for isatty(3) to pextlib1.0. Linking against ncurses to get this from terminfo could help as well, but I am not very confident with introducing new dependencies for MacPorts itself. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Jun 12 23:24:22 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 06:24:22 -0000 Subject: [MacPorts] #12651: poppler fails to build on Mac OS X 10.3 Panther In-Reply-To: <056.5154ef1687921bd5b247aab2cbf01573@macports.org> References: <056.5154ef1687921bd5b247aab2cbf01573@macports.org> Message-ID: <065.c4158ab12b9a8d03ae42d956173f3aae@macports.org> #12651: poppler fails to build on Mac OS X 10.3 Panther -----------------------------------+---------------------------------------- Reporter: sajmmiller at yahoo.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: -----------------------------------+---------------------------------------- Comment (by north at znet.com): Yes, still happening with 0.8.0 on panther (or very similar problem): ---> Building poppler with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/work/poppler-0.8.0" && make all " returned error 2 Command output: /opt/local/lib/libz.dylib(inflate.o) definition of _inflateSync /usr/lib/libz.1.dylib(inflate.o) definition of _inflateSync ld: warning multiple definitions of symbol _inflateSyncPoint /opt/local/lib/libz.dylib(inflate.o) definition of _inflateSyncPoint /usr/lib/libz.1.dylib(inflate.o) definition of _inflateSyncPoint ld: warning multiple definitions of symbol _inflate /opt/local/lib/libz.dylib(inflate.o) definition of _inflate /usr/lib/libz.1.dylib(inflate.o) definition of _inflate ld: warning multiple definitions of symbol _inflateSetDictionary /opt/local/lib/libz.dylib(inflate.o) definition of _inflateSetDictionary /usr/lib/libz.1.dylib(inflate.o) definition of _inflateSetDictionary ld: warning multiple definitions of symbol _inflateInit2_ /opt/local/lib/libz.dylib(inflate.o) definition of _inflateInit2_ /usr/lib/libz.1.dylib(inflate.o) definition of _inflateInit2_ ld: warning multiple definitions of symbol _inflateReset /opt/local/lib/libz.dylib(inflate.o) definition of _inflateReset /usr/lib/libz.1.dylib(inflate.o) definition of _inflateReset ld: warning multiple definitions of symbol _inflateInit_ /opt/local/lib/libz.dylib(inflate.o) definition of _inflateInit_ /usr/lib/libz.1.dylib(inflate.o) definition of _inflateInit_ ld: warning multiple definitions of symbol _adler32 /opt/local/lib/libz.dylib(adler32.o) definition of _adler32 /usr/lib/libz.1.dylib(adler32.o) definition of _adler32 ld: .libs/poppler-document.o illegal reference for -dynamic code (section difference reference from section (__TEXT,__eh_frame) relocation entry (0) to symbol: _g_once_init_enter defined in dylib: /opt/local/lib/libglib-2.0.dylib) /usr/bin/libtool: internal link edit command failed make[4]: *** [libpoppler-glib.la] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 03:21:54 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 10:21:54 -0000 Subject: [MacPorts] #15522: Octave installation fails In-Reply-To: <053.f7e9dae0b247b9e0d35725cc48ffd4b3@macports.org> References: <053.f7e9dae0b247b9e0d35725cc48ffd4b3@macports.org> Message-ID: <062.86d0ab6270ad761eb6e03de21a6ceca8@macports.org> #15522: Octave installation fails --------------------------------+------------------------------------------- Reporter: andre at emt.inrs.ca | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment (by alakazam at melix.net): I think that this task can be closed, as the bug was only present in an outdated Portfile. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 03:54:06 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 10:54:06 -0000 Subject: [MacPorts] #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support In-Reply-To: <053.7451d91a1dd994541661e12818b467cc@macports.org> References: <053.7451d91a1dd994541661e12818b467cc@macports.org> Message-ID: <062.f43ceb30adfe1f01df5f7588d11b63a0@macports.org> #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support --------------------------------+------------------------------------------- Reporter: demianw at gmail.com | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: scipy arpack --------------------------------+------------------------------------------- Comment (by demianw at gmail.com): On the first comment, I'm still using tiger and I was expecting ARPACK to fail some tests (as it does on Tiger) as it is still on the sandbox but a Bus Error is to much. I'm using gcc42 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 04:14:50 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 11:14:50 -0000 Subject: [MacPorts] #15600: pkg-config installed by binary installer Message-ID: <055.c2bd5d7770a58a4a388462adc32f8773@macports.org> #15600: pkg-config installed by binary installer ---------------------------------+------------------------------------------ Reporter: hramrach at centrum.cz | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ I installed MacPorts using the binary installer image. The installation contains pkg-config which is not part of any package. This may conflict with other pkg-config installation, should not be needed by the ports core, prevents successful installation of the pkgconfig port, and cannot be cleanly uninstalled/removed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 04:31:01 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 11:31:01 -0000 Subject: [MacPorts] #15601: vcp 1.6.1 is no longer available online Message-ID: <054.4f4b09fab82fcd0cfabe9765079d98cc@macports.org> #15601: vcp 1.6.1 is no longer available online --------------------------------+------------------------------------------- Reporter: alakazam at melix.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: vcp obsolete | --------------------------------+------------------------------------------- The {{{vcp}}} program is no longer available online, so the Portfile no longer builds. I think it should be obsoleted without changing the revision number (so that people who already have it installed don't have to uninstall it). I am attaching a Portfile that does this. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 07:06:54 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 14:06:54 -0000 Subject: [MacPorts] #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support In-Reply-To: <053.7451d91a1dd994541661e12818b467cc@macports.org> References: <053.7451d91a1dd994541661e12818b467cc@macports.org> Message-ID: <062.4883b76eca47cc76e42c6a4cdd7311c5@macports.org> #15588: py25-scipy 0.6.0_8 enhancement - added a variant for ARPACK support --------------------------------+------------------------------------------- Reporter: demianw at gmail.com | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: scipy arpack --------------------------------+------------------------------------------- Comment (by ram at macports.org): I get the same Bus Error using gcc42, must be a Leopard issue. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 09:36:09 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 16:36:09 -0000 Subject: [MacPorts] #15551: Patch updating dnsmasq to 2.42 In-Reply-To: <058.c2cde63a39a4f2ea25b5587291ab1c3d@macports.org> References: <058.c2cde63a39a4f2ea25b5587291ab1c3d@macports.org> Message-ID: <067.e0c110ca3fd0e927cb79a6aa891bf8f6@macports.org> #15551: Patch updating dnsmasq to 2.42 -------------------------------------+-------------------------------------- Reporter: davidgilman1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: dnsmasq -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) Comment: The config.h patch will need to be changed. MacPorts also works on platforms where `__APPLE__` is not defined, and files should still be installed into $prefix on them. In the portfile, you don't need a foreach loop for one file. This will do: {{{ post-activate { # Make sure initial conf file is present and setup correctly set f dnsmasq.conf if {![file exists ${prefix}/etc/${f}]} { file copy ${prefix}/etc/${f}.example \ ${prefix}/etc/${f} } } }}} I also notice you're installing it as dnsmasq.conf.sample in the makefile patch but referring to dnsmasq.conf.example in the portfile, so one will need to be changed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 09:52:24 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 16:52:24 -0000 Subject: [MacPorts] #15599: Sox gsm.c compile error In-Reply-To: <053.53009082048d8a2e656d48f4a8c48281@macports.org> References: <053.53009082048d8a2e656d48f4a8c48281@macports.org> Message-ID: <062.10260679d3d47ef6ba48cbf07df63752@macports.org> #15599: Sox gsm.c compile error --------------------------------+------------------------------------------- Reporter: steve at dekorte.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * milestone: => Port Bugs Comment: Please provide your OS and XCode versions, run `sudo port clean sox` followed by `sudo port -d install sox > sox.log 2>&1` and attach the resulting log file. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 10:43:30 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 17:43:30 -0000 Subject: [MacPorts] #15595: mlterm 2.9.2 build error In-Reply-To: <053.50c1419ae9ca58641416f8172d0b834f@macports.org> References: <053.50c1419ae9ca58641416f8172d0b834f@macports.org> Message-ID: <062.2d6495f832f32ac49b95105eb568972f@macports.org> #15595: mlterm 2.9.2 build error --------------------------------+------------------------------------------- Reporter: itabtabai at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: mlterm 2.9.2 kik_str.h:53: error: syntax error before '*' token --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * milestone: => Port Bugs Comment: Fixed in r37571, but now I get a different error later on: {{{ if [ -d kiklib ]; then cd kiklib ; make install-la ; fi cd src ; make install-la ../libtool --mode=install ../../ libkik.la /opt/local/var/macports/build /_Users_josh_Coding_dports- dev_svn_dports_x11_mlterm/work/destroot/opt/local/lib ../../ .libs/libkik.10.0.0.dylib /opt/local/var/macports/build /_Users_josh_Coding_dports- dev_svn_dports_x11_mlterm/work/destroot/opt/local/lib/libkik.10.0.0.dylib ../libtool: line 4542: ../../: is a directory }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 10:45:17 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 17:45:17 -0000 Subject: [MacPorts] #15600: pkg-config installed by binary installer In-Reply-To: <055.c2bd5d7770a58a4a388462adc32f8773@macports.org> References: <055.c2bd5d7770a58a4a388462adc32f8773@macports.org> Message-ID: <064.623aa75c8b5f7a99e3a6fe6a7e977474@macports.org> #15600: pkg-config installed by binary installer ----------------------------------+----------------------------------------- Reporter: hramrach at centrum.cz | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.6.0 Resolution: | Keywords: ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * cc: hramrach at centrum.cz (removed) * cc: jmpp at macports.org (added) * milestone: => MacPorts base bugs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 10:53:03 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 17:53:03 -0000 Subject: [MacPorts] #15601: vcp 1.6.1 is no longer available online In-Reply-To: <054.4f4b09fab82fcd0cfabe9765079d98cc@macports.org> References: <054.4f4b09fab82fcd0cfabe9765079d98cc@macports.org> Message-ID: <063.669a30d478ae0345e93a6dcd59e2ab47@macports.org> #15601: vcp 1.6.1 is no longer available online ---------------------------------+------------------------------------------ Reporter: alakazam at melix.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: vcp obsolete ---------------------------------+------------------------------------------ Comment (by jmr at macports.org): Actually the author seems to have just changed ISPs, and a newer version is available here: http://members.iinet.net.au/~lynx/vcp/ -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 11:22:17 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 18:22:17 -0000 Subject: [MacPorts] #15601: vcp 1.6.1 is no longer available online In-Reply-To: <054.4f4b09fab82fcd0cfabe9765079d98cc@macports.org> References: <054.4f4b09fab82fcd0cfabe9765079d98cc@macports.org> Message-ID: <063.af8ccf59443e31ded51406d7ee5b4448@macports.org> #15601: vcp 1.6.1 is no longer available online ---------------------------------+------------------------------------------ Reporter: alakazam at melix.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: vcp obsolete ---------------------------------+------------------------------------------ Comment (by jmr at macports.org): I've also added the distfile for 1.6.1 to svn (r37572, r37574). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 11:29:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 18:29:43 -0000 Subject: [MacPorts] #15595: mlterm 2.9.2 build error In-Reply-To: <053.50c1419ae9ca58641416f8172d0b834f@macports.org> References: <053.50c1419ae9ca58641416f8172d0b834f@macports.org> Message-ID: <062.2b501d69a79126b4d84a5639060904b3@macports.org> #15595: mlterm 2.9.2 build error --------------------------------+------------------------------------------- Reporter: itabtabai at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: mlterm 2.9.2 kik_str.h:53: error: syntax error before '*' token --------------------------------+------------------------------------------- Comment (by itabtabai at mac.com): So, what is libtool looking for? A file? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 11:51:29 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 18:51:29 -0000 Subject: [MacPorts] #15393: gimp-lqr-plugin 0.4.0-4 available In-Reply-To: <057.8ee136304f57c51fed37f1a08ff43c89@macports.org> References: <057.8ee136304f57c51fed37f1a08ff43c89@macports.org> Message-ID: <066.09bd4621546353a36223aa36ef746506@macports.org> #15393: gimp-lqr-plugin 0.4.0-4 available ------------------------------------+--------------------------------------- Reporter: marktrolley at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ------------------------------------+--------------------------------------- Changes (by simon at macports.org): * cc: simon at macports.org (added) * status: new => closed * resolution: => fixed * milestone: => Port Updates Comment: Committed in r37575 (with minor changes, renamed to "liblqr") and in r37576. Thanks for your help, Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 11:56:46 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 18:56:46 -0000 Subject: [MacPorts] #15544: Update py25-genshi to 0.4.4. In-Reply-To: <054.a65b294edc1bf207b6361f0526385614@macports.org> References: <054.a65b294edc1bf207b6361f0526385614@macports.org> Message-ID: <063.959c05be83070ebb85d488ed36301e4f@macports.org> #15544: Update py25-genshi to 0.4.4. ---------------------------------+------------------------------------------ Reporter: simon at macports.org | Owner: stechert at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ---------------------------------+------------------------------------------ Changes (by simon at macports.org): * status: new => closed * resolution: => fixed Comment: Committed in r37577. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 14:59:25 2008 From: noreply at macports.org (MacPorts) Date: Fri, 13 Jun 2008 21:59:25 -0000 Subject: [MacPorts] #15602: Checksum (md5) mismatch for sobby-0.4.1.tar.gz Message-ID: <063.576078b578808c25de886f984f0a508e@macports.org> #15602: Checksum (md5) mismatch for sobby-0.4.1.tar.gz -----------------------------------------+---------------------------------- Reporter: yarek at britishgraphics.co.uk | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 1.6.0 Keywords: | -----------------------------------------+---------------------------------- Error: Checksum (md5) mismatch for sobby-0.4.1.tar.gz Error: Target org.macports.checksum returned: Unable to verify file checksums The package linked appears to be 0.4.1 but the latest version is 0.4.4 http://releases.0x539.de/sobby/ here is the list of versions. md5 sums can also be found here: http://releases.0x539.de/sobby/MD5SUMS -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 18:07:28 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 01:07:28 -0000 Subject: [MacPorts] #15510: please bump version for ntfs-3g In-Reply-To: <064.ae297bbc3c5e28708ed8650040145870@macports.org> References: <064.ae297bbc3c5e28708ed8650040145870@macports.org> Message-ID: <073.586f90a12d818b122335aa8e9904f0e8@macports.org> #15510: please bump version for ntfs-3g -------------------------------------------+-------------------------------- Reporter: vladimir.endaltcev at gmail.com | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: ntfs-3g -------------------------------------------+-------------------------------- Comment (by jsd_macports at bvac.co.za): Replying to [comment:4 raimue at macports.org]: > You don't have to change the Portfile, just use this command: > {{{ > sudo env MASTER_SITES_LOCAL=http://distfiles.macports.org/ntfs-3g port -v fetch ntfs-3g > }}} Thanks, although (for the benefit of anyone else who lands up here) I think that is supposed to read MASTER_SITE_LOCAL (singular) which worked for me; MASTER_SITES_... did not. -J -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 18:36:29 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 01:36:29 -0000 Subject: [MacPorts] #12651: poppler fails to build on Mac OS X 10.3 Panther In-Reply-To: <056.5154ef1687921bd5b247aab2cbf01573@macports.org> References: <056.5154ef1687921bd5b247aab2cbf01573@macports.org> Message-ID: <065.d9be63159672c4c9f8781bd1672ee87c@macports.org> #12651: poppler fails to build on Mac OS X 10.3 Panther -----------------------------------+---------------------------------------- Reporter: sajmmiller at yahoo.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: -----------------------------------+---------------------------------------- Comment (by north at znet.com): I'd like to take the liberty of pointing out that poppler really doesn't do anything important for gimp2. If you're just trying to build gimp, edit the gimp2 Portfile and remove the dependency for poppler. It will build just fine. Many of the gimp developers do this on other platforms because ultimately almost nobody uses gimp on pdfs. All other required packages for gimp are building on 10.3.9 -- as of today -- and besides, I doubt anyone involved actually knows how to get poppler building on Panther anyway. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 18:46:09 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 01:46:09 -0000 Subject: [MacPorts] #15603: Can't build gimp2 on 10.3 Panther due to poppler dependency Message-ID: <050.c235287d259188ab14e4b45a73241a3e@macports.org> #15603: Can't build gimp2 on 10.3 Panther due to poppler dependency --------------------------------------+------------------------------------- Reporter: north at znet.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: gimp2 poppler dependency | --------------------------------------+------------------------------------- I know this isn't the fault of gimp2, but it's a show stopper anyway. Nobody seems to be able to get poppler building on Panther (or some other places) and it hamstrings gimp2. However, I edited my Portfile to remove the poppler dependency and gimp2 builds just fine -- though without the pdf functionality that, quite frankly, almost nobody uses. If there is some convenient way to discern the build is on Panther and remove the poppler dependency, all other dependencies are currently building and other Pantheroids could get gimp 2.4 working. Please forgive if this bug is inappropriate, but it seems like a simple fix. Thanks. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 20:03:43 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 03:03:43 -0000 Subject: [MacPorts] #15602: Checksum (md5) mismatch for sobby-0.4.1.tar.gz In-Reply-To: <063.576078b578808c25de886f984f0a508e@macports.org> References: <063.576078b578808c25de886f984f0a508e@macports.org> Message-ID: <072.4b750459f81663601c4fab75657efe09@macports.org> #15602: Checksum (md5) mismatch for sobby-0.4.1.tar.gz ------------------------------------------+--------------------------------- Reporter: yarek at britishgraphics.co.uk | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: base | Version: 1.6.0 Resolution: | Keywords: ------------------------------------------+--------------------------------- Changes (by jmr at macports.org): * cc: pkern at macports.org (added) * milestone: => Port Bugs Comment: Cc maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 20:21:05 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 03:21:05 -0000 Subject: [MacPorts] #15603: Can't build gimp2 on 10.3 Panther due to poppler dependency In-Reply-To: <050.c235287d259188ab14e4b45a73241a3e@macports.org> References: <050.c235287d259188ab14e4b45a73241a3e@macports.org> Message-ID: <059.e7a0569508b49e3a9d2e26c511c79754@macports.org> #15603: Can't build gimp2 on 10.3 Panther due to poppler dependency -----------------------------+---------------------------------------------- Reporter: north at znet.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gimp2 poppler dependency -----------------------------+---------------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * status: new => closed * resolution: => fixed * milestone: => Port Bugs Comment: Fixed in r37580. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Jun 13 20:58:55 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 03:58:55 -0000 Subject: [MacPorts] #15603: Can't build gimp2 on 10.3 Panther due to poppler dependency In-Reply-To: <050.c235287d259188ab14e4b45a73241a3e@macports.org> References: <050.c235287d259188ab14e4b45a73241a3e@macports.org> Message-ID: <059.4c6f4536523f938ab94a30e1f2da8480@macports.org> #15603: Can't build gimp2 on 10.3 Panther due to poppler dependency -----------------------------+---------------------------------------------- Reporter: north at znet.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gimp2 poppler dependency -----------------------------+---------------------------------------------- Comment (by north at znet.com): Thank you! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 04:37:17 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 11:37:17 -0000 Subject: [MacPorts] #15522: Octave installation fails In-Reply-To: <053.f7e9dae0b247b9e0d35725cc48ffd4b3@macports.org> References: <053.f7e9dae0b247b9e0d35725cc48ffd4b3@macports.org> Message-ID: <062.7ee4288f8ac2e1179870d38f2ad73c77@macports.org> #15522: Octave installation fails --------------------------------+------------------------------------------- Reporter: andre at emt.inrs.ca | Owner: stechert at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------+------------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 07:13:46 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 14:13:46 -0000 Subject: [MacPorts] #15604: opendx install error, error fetching cdf, no cdf version available with correct checksum Message-ID: <052.ce5c695bad3b2faeead946a529cc74d1@macports.org> #15604: opendx install error, error fetching cdf, no cdf version available with correct checksum ------------------------------+--------------------------------------------- Reporter: wingate at lanl.gov | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------+--------------------------------------------- I have tried to install opendx. It first failed while fetching cdf. I found Ticket #12988 which described a similar problem. I tried to find other versions of cdf and found some at nasa, but cdf32-dist-all.tar.gz does not pass the checksum test. While I'm at it, I think I also need instructions for applying the patch described in that ticket for compiling cdf to be used with opendx. I couldn't find explicit instructions (but am likely not searching for the right syntax). I am using a MacBook Pro Version 10.4.11 Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 07:18:19 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 14:18:19 -0000 Subject: [MacPorts] #15605: authforce package needs another deps Message-ID: <055.9571c91220960c3984fdb1fd36906401@macports.org> #15605: authforce package needs another deps -----------------------------------+---------------------------------------- Reporter: groolot at groolot.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: authforce depends_lib | -----------------------------------+---------------------------------------- = Context = Under Mac OS X Leopard 10.5.3, I tried to do a standard install of the {{{authforce}}} port. Works until a compile time error about readline. = Correction = Should add a deps in the package Portfile for the {{{readline}}} library. Maybe the attached patch file should be sufficient. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 07:44:27 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 14:44:27 -0000 Subject: [MacPorts] #15600: pkg-config installed by binary installer In-Reply-To: <055.c2bd5d7770a58a4a388462adc32f8773@macports.org> References: <055.c2bd5d7770a58a4a388462adc32f8773@macports.org> Message-ID: <064.fa6fb56ebde4350fb197f3e4c69b91a4@macports.org> #15600: pkg-config installed by binary installer ----------------------------------+----------------------------------------- Reporter: hramrach at centrum.cz | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.6.0 Resolution: | Keywords: ----------------------------------+----------------------------------------- Comment (by raimue at macports.org): I cannot confirm the issue. I tried the 1.6.0 disk image for Leopard, it does not install pkg-config. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 08:36:57 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 15:36:57 -0000 Subject: [MacPorts] #13539: New version of easytag In-Reply-To: <058.9b22f65edc41833f0b88878d03fe618c@macports.org> References: <058.9b22f65edc41833f0b88878d03fe618c@macports.org> Message-ID: <067.4f8db486b09947ecf86b788a5cf9ff43@macports.org> #13539: New version of easytag -------------------------------------+-------------------------------------- Reporter: jonas.engman at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.5.2 Resolution: | Keywords: -------------------------------------+-------------------------------------- Comment (by vrooman at grooveplanet.net): Replying to [comment:4 simmel at soy.se]: > Replying to [comment:3 jmr at macports.org]: > > Is there any reason to keep version 1.x around instead of replacing it with 2.x? > > No, I don't see any point. Make 2.1 easytag and make easytag-devel the version that bytestorm made in #11456. > > I've tried this Port and it works great. Much better than all OS X alternatives. easytag is a great program, I can't for the life of me find easytag2 in macports tho... How do I install it? According to this thread it's available but I can't find it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 09:46:58 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 16:46:58 -0000 Subject: [MacPorts] #15601: vcp 1.6.1 is no longer available online In-Reply-To: <054.4f4b09fab82fcd0cfabe9765079d98cc@macports.org> References: <054.4f4b09fab82fcd0cfabe9765079d98cc@macports.org> Message-ID: <063.b4ddbd521db674418604e8548396a6cf@macports.org> #15601: vcp 1.6.1 is no longer available online ---------------------------------+------------------------------------------ Reporter: alakazam at melix.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: vcp obsolete ---------------------------------+------------------------------------------ Comment (by alakazam at melix.net): Humh, I had somehow missed that link. I am attaching an updated Portfile for vcp 2.2. I haven't found a "homepage" for this port though. Thank you for the distfile fix for 1.6.1 ; it works fine. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 10:01:33 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 17:01:33 -0000 Subject: [MacPorts] #15606: QEMu Port Won't Install Message-ID: <059.33025d83e3c4f1d221f85591be9c4d6b@macports.org> #15606: QEMu Port Won't Install -------------------------------------+-------------------------------------- Reporter: james.herdman at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- It seems that the QEMu port won't install right now. The homepage is currently http://bellard.org/qemu/ not that which is currently listed. I think this is the issue, but I could be wrong. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 10:50:29 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 17:50:29 -0000 Subject: [MacPorts] #15607: gnumeric build stopped at py25-hashlib: Message-ID: <060.c38f483c84f1852b8671914b5e90ca12@macports.org> #15607: gnumeric build stopped at py25-hashlib: --------------------------------------+------------------------------------- Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------+------------------------------------- I tried installing gnumeric from a fresh and updated MacPorts installation, but it stopped with: {{{ ... ---> Building py25-hashlib with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-hashlib/work/Python-2.5.2/Modules" && /opt/local/bin/python2.5 setup.py build " returned error 1 Command output: running build running build_ext building '_hashlib' extension creating build creating build/temp.macosx-10.3-i386-2.5 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -I/opt/local/include -I/opt/local/include/python2.5 -c _hashopenssl.c -o build/temp.macosx-10.3-i386-2.5/_hashopenssl.o unable to execute -DNDEBUG: No such file or directory error: command '-DNDEBUG' failed with exit status 1 Error: The following dependencies failed to build: gnome-doc-utils iso- codes py25-hashlib libxml2 libxslt p5-xml-parser py25-gobject py25-libxml2 py25-numeric rarian getopt intltool gnome-common goffice libgnomeprintui gnome-icon-theme hicolor-icon-theme icon-naming-utils p5-getopt-long p5-pathtools p5-xml-simple p5-xml-namespacesupport p5-xml-sax gtk2 atk cairo fontconfig freetype libpixman libpng render xrender jpeg pango Xft2 xorg-xproto xorg-util-macros shared-mime-info tiff libgnomecanvas gail libart_lgpl libglade2 libgnomeprint bison libgnomecups popt libgsf gnome- vfs desktop-file-utils gconf orbit2 libidl gnome-mime-data libbonobo pcre py25-gtk py25-cairo py25-numpy fftw-3 Error: Status 1 encountered during processing. }}} The build could continue when I cleaned py25-hashlib: {{{ kollaps:~ henrik$ sudo port clean py25-hashlib Password: ---> Cleaning py25-hashlib }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 10:55:30 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 17:55:30 -0000 Subject: [MacPorts] #15608: gnumeric build stopped at py25-libxml2 Message-ID: <060.2be3d5f01fa8d7a86aa1f98eb987ce55@macports.org> #15608: gnumeric build stopped at py25-libxml2 --------------------------------------+------------------------------------- Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------+------------------------------------- I tried building gnumeric from a fresh and updated Macports. It first stopped at py25-hashlib (see Ticket #15607). Then it stopped at py25-libxml2: {{{ ---> Building py25-libxml2 with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-libxml2/work/libxml2-python-2.6.21" && /opt/local/bin/python2.5 setup.py build " returned error 1 Command output: /opt/local/lib/python2.5/xmllib.py:9: DeprecationWarning: The xmllib module is obsolete. Use xml.sax instead. warnings.warn("The xmllib module is obsolete. Use xml.sax instead.", DeprecationWarning) /opt/local/lib/python2.5/distutils/dist.py:247: UserWarning: 'licence' distribution option is deprecated; use 'license' warnings.warn(msg) Found 1579 functions in libxml2-api.xml Found 53 functions in libxml2-python-api.xml Generated 873 wrapper functions, 547 failed, 212 skipped Missing type converters: xmlRelaxNGValidityErrorFunc *:2 xmlXPathObjectPtr:22 const htmlEntityDesc *:2 xmlOutputMatchCallback:1 xmlElementContentPtr *:1 xmlStructuredErrorFunc:3 xmlSchematronValidCtxtPtr:2 xmlParserInputBufferCreateFilenameFunc:2 xmlSchemaValType:2 size_t:1 xmlEnumerationPtr:5 xmlSchemaWildcardPtr:1 xmlXIncludeCtxtPtr:4 xmlRelaxNGValidityErrorFunc:2 xmlSAXHandler *:4 ...:1 xmlShellReadlineFunc:1 xmlDict *:1 xmlAutomataPtr:19 xmlParserInputPtr:17 xmlCatalogAllow:2 xmlExpNodePtr:3 xmlElementContent *:1 xmlCharEncodingOutputFunc:1 xmlDictPtr:10 xmlTextWriterPtr:77 const htmlElemDesc *:1 xmlIDPtr:1 xmlSchemaValPtr:13 xmlInputMatchCallback:1 xmlElementTablePtr:2 xmlChar **:15 xmlXPathCompExprPtr:5 xmlTextReaderErrorFunc:1 xmlExternalEntityLoader:2 xmlNotationTablePtr:2 xmlXPathVariableLookupFunc:1 xmlParserNodeInfoPtr:1 xmlExpCtxtPtr:14 xmlPatternPtr:8 xmlC14NIsVisibleCallback:1 xmlDeregisterNodeFunc:2 va_list:1 xmlSchemaTypePtr:9 htmlStatus:1 xmlRegisterNodeFunc:2 xmlAttributeType:2 xmlRefPtr:1 xmlCharEncodingHandler *:4 xmlNotationPtr:3 xmlSaveCtxtPtr:8 xmlRegExecCallbacks:1 xmlNsPtr *:1 xmlLocationSetPtr:6 xmlSchemaSAXPlugPtr:1 xmlModulePtr:4 xmlEnumerationPtr *:2 xmlShellCtxtPtr:10 xlinkNodeDetectFunc:2 xmlRefTablePtr:1 xmlStreamCtxtPtr:4 xmlSchemaValidityErrorFunc *:2 xmlChRangeGroupPtr:1 xmlAttributeTablePtr:2 xmlSchematronParserCtxtPtr:5 xmlCatalogPrefer:1 xmlParserNodeInfoSeqPtr:3 xmlSchematronPtr:2 xmlNodePtr *:2 xmlInputReadCallback:7 char **:5 xmlCharEncoding:13 xmlRegExecCtxtPtr:5 xmlElementContentType:2 void *:85 xmlTextReaderErrorFunc *:1 xmlSAXHandlerPtr *:1 xmlEntityReferenceFunc:1 xmlDocPtr *:1 xmlBufferAllocationScheme:3 xmlSchemaValidityErrorFunc:2 xmlDOMWrapCtxtPtr:5 xmlOutputWriteCallback:2 xmlSchemaFacetPtr:7 xlinkHandlerPtr:2 xmlXPathFuncLookupFunc:1 htmlElemDesc *:3 xmlCharEncodingHandlerPtr:7 xmlCharEncodingInputFunc:1 xmlFeature:1 const xmlParserNodeInfo *:1 xmlNodeSetPtr:32 xmlEntitiesTablePtr:3 xmlIDTablePtr:1 xmlXPathFunction:4 xmlOutputBufferCreateFilenameFunc:2 xmlElementContentPtr:8 xmlElementTypeVal:1 xlinkType:1 xmlGenericErrorFunc *:1 running build running build_py creating build creating build/lib.macosx-10.3-i386-2.5 copying libxml2.py -> build/lib.macosx-10.3-i386-2.5 copying drv_libxml2.py -> build/lib.macosx-10.3-i386-2.5 running build_ext building 'libxml2mod' extension creating build/temp.macosx-10.3-i386-2.5 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -D_REENTRANT=1 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/python2.5 -c libxml2-py.c -o build/temp.macosx-10.3-i386-2.5/libxml2-py.o unable to execute -DNDEBUG: No such file or directory error: command '-DNDEBUG' failed with exit status 1 Error: The following dependencies failed to build: gnome-doc-utils py25-libxml2 py25-numeric rarian getopt intltool gnome-common goffice libgnomeprintui gnome-icon-theme hicolor-icon-theme icon-naming-utils p5 -getopt-long p5-pathtools p5-xml-simple p5-xml-namespacesupport p5-xml-sax gtk2 atk cairo fontconfig freetype libpixman libpng render xrender jpeg pango Xft2 xorg-xproto xorg-util-macros shared-mime-info tiff libgnomecanvas gail libart_lgpl libglade2 libgnomeprint bison libgnomecups popt libgsf gnome-vfs desktop-file-utils gconf orbit2 libidl gnome-mime- data libbonobo pcre py25-gtk py25-cairo py25-numpy fftw-3 Error: Status 1 encountered during processing. kollaps:~ henrik$ sudo /opt/local/bin/port clean py25-hashlib Password: }}} The build could continue by cleaning py25-libxml2: {{{ kollaps:~ henrik$ sudo port clean py25-libxml2 Password: ---> Cleaning py25-libxml2 }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 11:01:06 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 18:01:06 -0000 Subject: [MacPorts] #15609: gnumeric build stopped at p5-getopt-long Message-ID: <060.0e31ac9b3191af9987fd7779492766f6@macports.org> #15609: gnumeric build stopped at p5-getopt-long --------------------------------------+------------------------------------- Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------+------------------------------------- gnumeric failed to build on a fresh and updated macports installation. First it stoppet at p5-hashlib (see Ticket #15607) and p5-libxml2 (see Ticket #15608), then it stopped at p5-getopt-long: {{{ ---> Activating p5-getopt-long 2.37_0 Error: Target org.macports.activate returned: Image error: /opt/local/lib/perl5/5.8.8/Getopt/Long.pm is being used by the active perl5.8 port. Please deactivate this port first, or use the -f flag to force the activation. Error: The following dependencies failed to build: goffice libgnomeprintui gnome-icon-theme icon-naming-utils p5-getopt-long p5-xml-simple p5-xml- namespacesupport p5-xml-sax gtk2 atk cairo fontconfig freetype libpixman libpng render xrender jpeg pango Xft2 xorg-xproto xorg-util-macros shared- mime-info tiff libgnomecanvas gail libart_lgpl libglade2 libgnomeprint bison libgnomecups popt libgsf gnome-vfs desktop-file-utils gconf orbit2 libidl gnome-mime-data libbonobo pcre py25-gtk py25-cairo py25-numpy fftw-3 Error: Status 1 encountered during processing. }}} The build could continue when force-activating p5-getopt-long: {{{ kollaps:~ henrik$ sudo /opt/local/bin/port activate -f p5-getopt- long at 2.37_0 ---> Activating p5-getopt-long 2.37_0 Warning: File /opt/local/lib/perl5/5.8.8/Getopt/Long.pm already exists. Moving to: /opt/local/lib/perl5/5.8.8/Getopt/Long.pm.mp_1213465625. Warning: File /opt/local/lib/perl5/5.8.8/newgetopt.pl already exists. Moving to: /opt/local/lib/perl5/5.8.8/newgetopt.pl.mp_1213465625. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 11:03:47 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 18:03:47 -0000 Subject: [MacPorts] #15608: gnumeric build stopped at py25-libxml2 In-Reply-To: <060.2be3d5f01fa8d7a86aa1f98eb987ce55@macports.org> References: <060.2be3d5f01fa8d7a86aa1f98eb987ce55@macports.org> Message-ID: <069.77c588e7f9beb958672e7f7ba8a142c7@macports.org> #15608: gnumeric build stopped at py25-libxml2 ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------+------------------------------------ Comment (by macports at henrik.synth.no): I forgot to mention that this is running on a Macbook Pro 2ghz with Leopard 10.5.3. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 11:04:31 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 18:04:31 -0000 Subject: [MacPorts] #15607: gnumeric build stopped at py25-hashlib: In-Reply-To: <060.c38f483c84f1852b8671914b5e90ca12@macports.org> References: <060.c38f483c84f1852b8671914b5e90ca12@macports.org> Message-ID: <069.7a930430ab04edcea1fe1fe52d074c4b@macports.org> #15607: gnumeric build stopped at py25-hashlib: ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------+------------------------------------ Comment (by macports at henrik.synth.no): I forgot to mention that this is on a Macbook Pro 2ghz with Leopard 10.5.3. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 11:05:19 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 18:05:19 -0000 Subject: [MacPorts] #15609: gnumeric build stopped at p5-getopt-long In-Reply-To: <060.0e31ac9b3191af9987fd7779492766f6@macports.org> References: <060.0e31ac9b3191af9987fd7779492766f6@macports.org> Message-ID: <069.9916ed7f555b276cb0d241d564729278@macports.org> #15609: gnumeric build stopped at p5-getopt-long ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------+------------------------------------ Comment (by macports at henrik.synth.no): I forgot to mention that this is on a Macbook Pro 2ghz with Leopard 10.5.3. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 11:14:25 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 18:14:25 -0000 Subject: [MacPorts] #15610: py-pyrex & py25-pyrex: Version bump to 9.8.4 Message-ID: <053.d0b0db2785fe39392b3a0b473963b835@macports.org> #15610: py-pyrex & py25-pyrex: Version bump to 9.8.4 -------------------------------+-------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- I've updated the py-pyrex and py25-pyrex portfiles to the latest version (the older versions don't exist on the website anymore). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 11:14:34 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 18:14:34 -0000 Subject: [MacPorts] #15611: py-pyrex & py25-pyrex: Version bump to 9.8.4 Message-ID: <053.8a0fb443c6378c55f0cbeb5b1d46b12d@macports.org> #15611: py-pyrex & py25-pyrex: Version bump to 9.8.4 -------------------------------+-------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- I've updated the py-pyrex and py25-pyrex portfiles to the latest version (the older versions don't exist on the website anymore). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 12:18:01 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 19:18:01 -0000 Subject: [MacPorts] #15612: gnumeric build stopped at py25-numpy Message-ID: <060.24a0e8a94e8f6fd97d5bb88ddb6b19d2@macports.org> #15612: gnumeric build stopped at py25-numpy --------------------------------------+------------------------------------- Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------+------------------------------------- gnumeric failed to build on a fresh and updated macports installation. First it stoppet at p5-hashlib (see Ticket #15607), p5-libxml2 (see Ticket #15608) and p5-getopt-long (see Ticket #15609), then (much later) it stopped at py25-numpy: {{{ ---> Building py25-numpy with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-numpy/work/numpy-1.1.0" && /opt/local/bin/python2.5 setup.py build " returned error 1 Command output: Running from numpy source directory. non-existing path in 'numpy/distutils': 'site.cfg' F2PY Version 2_5237 blas_opt_info: FOUND: extra_link_args = ['-Wl,-framework', '-Wl,Accelerate'] define_macros = [('NO_ATLAS_INFO', 3)] extra_compile_args = ['-msse3', '-I/System/Library/Frameworks/vecLib.framework/Headers'] lapack_opt_info: FOUND: extra_link_args = ['-Wl,-framework', '-Wl,Accelerate'] define_macros = [('NO_ATLAS_INFO', 3)] extra_compile_args = ['-msse3'] running build running scons customize UnixCCompiler Could not locate executable -DNDEBUG error: Could not find compiler executable info for scons Error: The following dependencies failed to build: py25-gtk py25-cairo py25-numpy Error: Status 1 encountered during processing. }}} The build could continue after cleaning py25-numpy: {{{ kollaps:~ henrik$ sudo /opt/local/bin/port clean py25-numpy ---> Cleaning py25-numpy }}} This is on a Macbook Pro 2ghz with Leopard 10.5.3. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 12:27:29 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 19:27:29 -0000 Subject: [MacPorts] #15612: gnumeric build stopped at py25-numpy In-Reply-To: <060.24a0e8a94e8f6fd97d5bb88ddb6b19d2@macports.org> References: <060.24a0e8a94e8f6fd97d5bb88ddb6b19d2@macports.org> Message-ID: <069.6b8ef2e5fd2d0a100603a661117f78f4@macports.org> #15612: gnumeric build stopped at py25-numpy ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------+------------------------------------ Comment (by macports at henrik.synth.no): With the workarounds in #15607, #15608, #15609 and #15612 (this issue), gnumeric finally built and installed successfully. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 12:28:41 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 19:28:41 -0000 Subject: [MacPorts] #15607: gnumeric build stopped at py25-hashlib: In-Reply-To: <060.c38f483c84f1852b8671914b5e90ca12@macports.org> References: <060.c38f483c84f1852b8671914b5e90ca12@macports.org> Message-ID: <069.84ecc31127cfc5f394512435140c74aa@macports.org> #15607: gnumeric build stopped at py25-hashlib: ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------+------------------------------------ Comment (by macports at henrik.synth.no): With the workarounds in #15607 (this issue), #15608, #15609 and #15612, gnumeric finally built and installed successfully. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 12:30:10 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 19:30:10 -0000 Subject: [MacPorts] #15608: gnumeric build stopped at py25-libxml2 In-Reply-To: <060.2be3d5f01fa8d7a86aa1f98eb987ce55@macports.org> References: <060.2be3d5f01fa8d7a86aa1f98eb987ce55@macports.org> Message-ID: <069.9eb0378ea34d3a85fae79bf66927b1f5@macports.org> #15608: gnumeric build stopped at py25-libxml2 ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------+------------------------------------ Comment (by macports at henrik.synth.no): With the workarounds in #15607, #15608 (this issue), #15609 and #15612, gnumeric finally built and installed successfully. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 12:31:28 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 19:31:28 -0000 Subject: [MacPorts] #15609: gnumeric build stopped at p5-getopt-long In-Reply-To: <060.0e31ac9b3191af9987fd7779492766f6@macports.org> References: <060.0e31ac9b3191af9987fd7779492766f6@macports.org> Message-ID: <069.b4a633b3f614bb4603db10b5ddb6cfd8@macports.org> #15609: gnumeric build stopped at p5-getopt-long ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------+------------------------------------ Comment (by macports at henrik.synth.no): With the workarounds in #15607, #15608, #15609 (this issue) and #15612, gnumeric finally built and installed successfully. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 13:39:22 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 20:39:22 -0000 Subject: [MacPorts] #15613: Port for Apache unable to fetch source code since update to 2.2.9 Message-ID: <050.b61a2eb2b9debb8617ebae226b168dab@macports.org> #15613: Port for Apache unable to fetch source code since update to 2.2.9 ----------------------------+----------------------------------------------- Reporter: hirshj at att.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: apache | ----------------------------+----------------------------------------------- in running port output is ---> Fetching apache2 ---> Attempting to fetch httpd-2.2.8.tar.bz2 from http://www.apache.org/dist/httpd ---> Attempting to fetch httpd-2.2.8.tar.bz2 from http://apache.planetmirror.com.au/dist/httpd ---> Attempting to fetch httpd-2.2.8.tar.bz2 from ftp://ftp.planetmirror.com/pub/apache/dist/httpd ---> Attempting to fetch httpd-2.2.8.tar.bz2 from ftp://ftp.is.co.za/Apache/dist/httpd ---> Attempting to fetch httpd-2.2.8.tar.bz2 from ftp://ftp.infoscience.co.jp/pub/net/apache/dist/httpd ---> Attempting to fetch httpd-2.2.8.tar.bz2 from http://svn.macports.org/repository/macports/distfiles/apache2 ---> Attempting to fetch httpd-2.2.8.tar.bz2 from http://svn.macports.org/repository/macports/distfiles/general/ ---> Attempting to fetch httpd-2.2.8.tar.bz2 from http://svn.macports.org/repository/macports/downloads/apache2 Error: Target org.macports.fetch returned: fetch failed Error: Status 1 encountered during processing. Investigation has shown that 2.2.8 has been superseded by 2.2.9 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 13:55:00 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 20:55:00 -0000 Subject: [MacPorts] #15614: New port: atlas + lapack Message-ID: <053.6efe3764a26295e111dcbd8283860986@macports.org> #15614: New port: atlas + lapack -------------------------------+-------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- I made a new port file for atlas & lapack, it is somewhat based off of the fink .info file for this same install. The port will install atlas 3.8.2 and lapack 3.1.1. Works on my machine, I hope it works for you. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 14:00:03 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 21:00:03 -0000 Subject: [MacPorts] #15615: New port: py-cvxopt and py25-cvxopt Message-ID: <053.b4bd294b8fd50fb7124d0a48fbfbdc01@macports.org> #15615: New port: py-cvxopt and py25-cvxopt -------------------------------+-------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- I wrote port files for py-cvxopt and py25-cvxopt. They depend on atlas for which a port file can be found [http://trac.macports.org/ticket/15614 here]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 14:24:33 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 21:24:33 -0000 Subject: [MacPorts] #15284: macfuse 1.5 build failure In-Reply-To: <052.4ad9658d6b3bb89617b438a1c3699888@macports.org> References: <052.4ad9658d6b3bb89617b438a1c3699888@macports.org> Message-ID: <061.7674428e5637c2e59a59d846bbf32c21@macports.org> #15284: macfuse 1.5 build failure -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment (by antonin at hildebrand.cz): I have same situation here. I've installed macports' ruby, but I've also deleted original ruby in /usr/bin/ruby (+whole original ruby installation). The problem is in calling gen_bridge_metadata, which generates some bindings for dynamic languages. I hope, this step is needed only when you have something which will potentionally use them. This worked for me after failed install: {{{ private method `gsub' called for 1:Fixnum Usage: gen_bridge_metadata [options] Use the `-h' flag or consult gen_bridge_metadata(1) for help. ** BUILD FAILED ** Error: Status 1 encountered during processing. $ sudo port clean macfuse ---> Cleaning macfuse $ sudo mv /usr/bin/gen_bridge_metadata /usr/bin/gen_bridge_metadata_hidden $ sudo port install macfuse ---> Fetching macfuse ---> Verifying checksum(s) for macfuse ---> Extracting macfuse ---> Applying patches to macfuse ---> Configuring macfuse ---> Building macfuse with target all ---> Staging macfuse into destroot Warning: macfuse requests to install files outside the common directory structure! ---> Installing macfuse 1.5_0 ---> Activating macfuse 1.5_0 ---> Cleaning macfuse $ sudo mv /usr/bin/gen_bridge_metadata_hidden /usr/bin/gen_bridge_metadata }}} Hope it helps someone who is in the same situation ... -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 15:04:02 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 22:04:02 -0000 Subject: [MacPorts] #15616: New port: py-cython and py25-cython Message-ID: <053.72fb424ba97fe2daac69baa69266c181@macports.org> #15616: New port: py-cython and py25-cython -------------------------------+-------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- I made ports for py-cython and py25-cython. It is a way of writing extension modules similar to pyrex (in fact I just adapted the pyrex port). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 15:06:09 2008 From: noreply at macports.org (MacPorts) Date: Sat, 14 Jun 2008 22:06:09 -0000 Subject: [MacPorts] #15617: New port: py-sympy and py25-sympy Message-ID: <053.364afe482281df8bf38be64c90b5c3fc@macports.org> #15617: New port: py-sympy and py25-sympy -------------------------------+-------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- I created ports for sympy a symbolic algebra module for python. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 17:36:01 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 00:36:01 -0000 Subject: [MacPorts] #15618: UPDATE: tor-devel-0.2.1.1-alpha Message-ID: <057.e8e9e94e3cfff9b5261f7d6a72b7bc96@macports.org> #15618: UPDATE: tor-devel-0.2.1.1-alpha -----------------------------------+---------------------------------------- Reporter: darren.bane at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | -----------------------------------+---------------------------------------- tor-devel-0.2.1.1-alpha Description: Updating to the latest unstable version of tor. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 19:01:00 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 02:01:00 -0000 Subject: [MacPorts] #15619: sudo port install pallet fails via bad path Message-ID: <055.6b9e1d2c291cf4cbfa296c6bceb243c9@macports.org> #15619: sudo port install pallet fails via bad path ---------------------------------+------------------------------------------ Reporter: markmi at dsl-only.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ Attempting sudo port install pallet resulted in an attempted use of /Users/Shared/Developer/MacPorts/Repository/users/rhwood/Pallet/PalletHelper.m, which did not exist. In fact there was no Developer/ below /Users/Shared/. The path is associated with -c /Users/Shared/Developer/MacPorts/Repository/users/rhwood/Pallet/PalletHelper.m in the command. There is no user rhwood on the Macintosh in question. The output of the attempt is below. ---> Building Pallet Error: Target org.macports.build returned: shell command "cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_Pallet/work/Pallet" && xcodebuild -target "Pallet" -configuration Release build OBJROOT=build/ SYMROOT=build/ " returned error 1 Command output: === BUILDING NATIVE TARGET PalletHelper WITH CONFIGURATION Release === Checking Dependencies... CompileC build/Pallet.build/Release/PalletHelper.build/Objects- normal/i386/PalletHelper.o /Users/Shared/Developer/MacPorts/Repository/users/rhwood/Pallet/PalletHelper.m normal i386 objective-c com.apple.compilers.gcc.4_0 cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_Pallet/work/Pallet /Developer/usr/bin/gcc-4.0 -x objective-c -arch i386 -pipe -Wno- trigraphs -fpascal-strings -fasm-blocks -Os -mdynamic-no-pic -fmessage- length=0 -fvisibility=hidden -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_Pallet/work/Pallet/build/Pallet.build/Release/PalletHelper.build/PalletHelper.hmap -F/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_Pallet/work/Pallet/build/Release -F/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_Pallet/work/Pallet -F/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_Pallet/work/Pallet/../../../../Shared/Developer/MacPorts/Repository/users/rhwood/MacPorts.Framework/build/Debug -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_Pallet/work/Pallet/build/Release/include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_Pallet/work/Pallet/build/Pallet.build/Release/PalletHelper.build/DerivedSources -include /Library/Caches/com.apple.Xcode.0/SharedPrecompiledHeaders /AppKit-aopswtivujlgddhjbzgyjcxookig/AppKit.h -c /Users/Shared/Developer/MacPorts/Repository/users/rhwood/Pallet/PalletHelper.m -o /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_Pallet/work/Pallet/build/Pallet.build/Release/PalletHelper.build /Objects-normal/i386/PalletHelper.o i686-apple-darwin9-gcc-4.0.1: /Users/Shared/Developer/MacPorts/Repository/users/rhwood/Pallet/PalletHelper.m: No such file or directory i686-apple-darwin9-gcc-4.0.1: warning: '-x objective-c' after last input file has no effect i686-apple-darwin9-gcc-4.0.1: no input files ** BUILD FAILED ** Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 19:49:45 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 02:49:45 -0000 Subject: [MacPorts] #15604: opendx install error, error fetching cdf, no cdf version available with correct checksum In-Reply-To: <052.ce5c695bad3b2faeead946a529cc74d1@macports.org> References: <052.ce5c695bad3b2faeead946a529cc74d1@macports.org> Message-ID: <061.0a0b24e83517549f91d56d17ef1b15d1@macports.org> #15604: opendx install error, error fetching cdf, no cdf version available with correct checksum -------------------------------+-------------------------------------------- Reporter: wingate at lanl.gov | Owner: gwright at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => gwright at macports.org * milestone: => Port Bugs Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 19:51:43 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 02:51:43 -0000 Subject: [MacPorts] #15605: authforce package needs another deps In-Reply-To: <055.9571c91220960c3984fdb1fd36906401@macports.org> References: <055.9571c91220960c3984fdb1fd36906401@macports.org> Message-ID: <064.22d99bad58ae195901ed21a573dc9792@macports.org> #15605: authforce package needs another deps ----------------------------------+----------------------------------------- Reporter: groolot at groolot.net | Owner: jmr at macports.org Type: defect | Status: assigned Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: authforce depends_lib ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 19:53:22 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 02:53:22 -0000 Subject: [MacPorts] #15605: authforce package needs another deps In-Reply-To: <055.9571c91220960c3984fdb1fd36906401@macports.org> References: <055.9571c91220960c3984fdb1fd36906401@macports.org> Message-ID: <064.cb9ec1b520c710aee7a766b1ce49d285@macports.org> #15605: authforce package needs another deps ----------------------------------+----------------------------------------- Reporter: groolot at groolot.net | Owner: jmr at macports.org Type: defect | Status: closed Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: authforce depends_lib ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Fixed in r37593. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:04:42 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:04:42 -0000 Subject: [MacPorts] #15606: QEMu Port Won't Install In-Reply-To: <059.33025d83e3c4f1d221f85591be9c4d6b@macports.org> References: <059.33025d83e3c4f1d221f85591be9c4d6b@macports.org> Message-ID: <068.b76c6ffbc293ab3330ab517ffb88b828@macports.org> #15606: QEMu Port Won't Install --------------------------------------+------------------------------------- Reporter: james.herdman at gmail.com | Owner: pmq at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => pmq at macports.org * milestone: => Port Bugs Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:05:30 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:05:30 -0000 Subject: [MacPorts] #15617: New port: py-sympy and py25-sympy In-Reply-To: <053.364afe482281df8bf38be64c90b5c3fc@macports.org> References: <053.364afe482281df8bf38be64c90b5c3fc@macports.org> Message-ID: <062.0fe968194bb94396ac44df0782bf3308@macports.org> #15617: New port: py-sympy and py25-sympy --------------------------------+------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by ram at macports.org): * owner: macports-tickets at lists.macosforge.org => ram at macports.org * status: new => assigned * milestone: => Port Submissions -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:06:25 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:06:25 -0000 Subject: [MacPorts] #15607: gnumeric build stopped at py25-hashlib: In-Reply-To: <060.c38f483c84f1852b8671914b5e90ca12@macports.org> References: <060.c38f483c84f1852b8671914b5e90ca12@macports.org> Message-ID: <069.cf5f49a14c1da743658542e803031dea@macports.org> #15607: gnumeric build stopped at py25-hashlib: ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: ---------------------------------------+------------------------------------ Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #13930. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:06:51 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:06:51 -0000 Subject: [MacPorts] #15608: gnumeric build stopped at py25-libxml2 In-Reply-To: <060.2be3d5f01fa8d7a86aa1f98eb987ce55@macports.org> References: <060.2be3d5f01fa8d7a86aa1f98eb987ce55@macports.org> Message-ID: <069.150c896b7aead6947b07b2c9a7151642@macports.org> #15608: gnumeric build stopped at py25-libxml2 ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: ---------------------------------------+------------------------------------ Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #13930. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:10:16 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:10:16 -0000 Subject: [MacPorts] #15609: gnumeric build stopped at p5-getopt-long In-Reply-To: <060.0e31ac9b3191af9987fd7779492766f6@macports.org> References: <060.0e31ac9b3191af9987fd7779492766f6@macports.org> Message-ID: <069.91df5e400dad1e5138aa51ce72ace818@macports.org> #15609: gnumeric build stopped at p5-getopt-long ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: ---------------------------------------+------------------------------------ Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #12875. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:12:15 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:12:15 -0000 Subject: [MacPorts] #15610: py-pyrex & py25-pyrex: Version bump to 9.8.4 In-Reply-To: <053.d0b0db2785fe39392b3a0b473963b835@macports.org> References: <053.d0b0db2785fe39392b3a0b473963b835@macports.org> Message-ID: <062.a603c28c21da554507f2b3ac05d45787@macports.org> #15610: py-pyrex & py25-pyrex: Version bump to 9.8.4 --------------------------------+------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate * milestone: => Port Updates Comment: Duplicate of #15611. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:13:53 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:13:53 -0000 Subject: [MacPorts] #15611: py-pyrex & py25-pyrex: Version bump to 9.8.4 In-Reply-To: <053.8a0fb443c6378c55f0cbeb5b1d46b12d@macports.org> References: <053.8a0fb443c6378c55f0cbeb5b1d46b12d@macports.org> Message-ID: <062.17c52d13e8af253d46837b836a14088e@macports.org> #15611: py-pyrex & py25-pyrex: Version bump to 9.8.4 --------------------------------+------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * milestone: => Port Updates Comment: Could you please attach diffs rather than complete portfiles? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:15:06 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:15:06 -0000 Subject: [MacPorts] #15612: gnumeric build stopped at py25-numpy In-Reply-To: <060.24a0e8a94e8f6fd97d5bb88ddb6b19d2@macports.org> References: <060.24a0e8a94e8f6fd97d5bb88ddb6b19d2@macports.org> Message-ID: <069.4c83749867add249ac5ba5d99bf56568@macports.org> #15612: gnumeric build stopped at py25-numpy ---------------------------------------+------------------------------------ Reporter: macports at henrik.synth.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: ---------------------------------------+------------------------------------ Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #13930. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:16:06 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:16:06 -0000 Subject: [MacPorts] #15613: Port for Apache unable to fetch source code since update to 2.2.9 In-Reply-To: <050.b61a2eb2b9debb8617ebae226b168dab@macports.org> References: <050.b61a2eb2b9debb8617ebae226b168dab@macports.org> Message-ID: <059.c86f5f06bdf8c3719171a19bc9ddf022@macports.org> #15613: Port for Apache unable to fetch source code since update to 2.2.9 -----------------------------+---------------------------------------------- Reporter: hirshj at att.net | Owner: imajes at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: apache -----------------------------+---------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => imajes at macports.org * milestone: => Port Bugs Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:16:56 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:16:56 -0000 Subject: [MacPorts] #15614: New port: atlas + lapack In-Reply-To: <053.6efe3764a26295e111dcbd8283860986@macports.org> References: <053.6efe3764a26295e111dcbd8283860986@macports.org> Message-ID: <062.68bfc47e6cce08b8a8745920cba19990@macports.org> #15614: New port: atlas + lapack --------------------------------+------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * milestone: => Port Submissions -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:17:29 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:17:29 -0000 Subject: [MacPorts] #15615: New port: py-cvxopt and py25-cvxopt In-Reply-To: <053.b4bd294b8fd50fb7124d0a48fbfbdc01@macports.org> References: <053.b4bd294b8fd50fb7124d0a48fbfbdc01@macports.org> Message-ID: <062.a5941f87dd6268c00ec83782a4bebb2b@macports.org> #15615: New port: py-cvxopt and py25-cvxopt --------------------------------+------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * milestone: => Port Submissions -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:17:46 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:17:46 -0000 Subject: [MacPorts] #15616: New port: py-cython and py25-cython In-Reply-To: <053.72fb424ba97fe2daac69baa69266c181@macports.org> References: <053.72fb424ba97fe2daac69baa69266c181@macports.org> Message-ID: <062.4614d5a4e74fad3e1c2203f293cbda2f@macports.org> #15616: New port: py-cython and py25-cython --------------------------------+------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * milestone: => Port Submissions -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:32:12 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:32:12 -0000 Subject: [MacPorts] #15618: UPDATE: tor-devel-0.2.1.1-alpha In-Reply-To: <057.e8e9e94e3cfff9b5261f7d6a72b7bc96@macports.org> References: <057.e8e9e94e3cfff9b5261f7d6a72b7bc96@macports.org> Message-ID: <066.604dfe6654b604e1d1fbc955078e99ef@macports.org> #15618: UPDATE: tor-devel-0.2.1.1-alpha ------------------------------------+--------------------------------------- Reporter: darren.bane at gmail.com | Owner: boeyms at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------------+--------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => boeyms at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:33:14 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:33:14 -0000 Subject: [MacPorts] #15619: sudo port install pallet fails via bad path In-Reply-To: <055.6b9e1d2c291cf4cbfa296c6bceb243c9@macports.org> References: <055.6b9e1d2c291cf4cbfa296c6bceb243c9@macports.org> Message-ID: <064.7d44b9e6ef88613be4a779b14d47d078@macports.org> #15619: sudo port install pallet fails via bad path ----------------------------------+----------------------------------------- Reporter: markmi at dsl-only.net | Owner: rhwood at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => rhwood at macports.org * milestone: => Port Bugs Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 20:33:42 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 03:33:42 -0000 Subject: [MacPorts] #15617: New port: py-sympy and py25-sympy In-Reply-To: <053.364afe482281df8bf38be64c90b5c3fc@macports.org> References: <053.364afe482281df8bf38be64c90b5c3fc@macports.org> Message-ID: <062.a139770dee84a2fb86a8cada9cfc4599@macports.org> #15617: New port: py-sympy and py25-sympy --------------------------------+------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: ram at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------+------------------------------------------- Changes (by ram at macports.org): * status: assigned => closed * resolution: => fixed Comment: committed in r37594, with minor changes to allow the python24 and python25 versions to be installed together, thanks -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Jun 14 23:08:22 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 06:08:22 -0000 Subject: [MacPorts] #15620: sudo port install bzr-gtk fails with a bad command line in building py25-bz2 Message-ID: <055.40814b437fd98982dbdb81bb22f5f83a@macports.org> #15620: sudo port install bzr-gtk fails with a bad command line in building py25-bz2 ---------------------------------+------------------------------------------ Reporter: markmi at dsl-only.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ I attempted sudo port install bzr-gtk and it attempted a command that looked like (with the prior line shown and the following error text): creating build/temp.macosx-10.3-i386-2.5 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -I/opt/local/include/ -I/opt/local/include/python2.5 -c bz2module.c -o build/temp.macosx-10.3-i386-2.5/bz2module.o unable to execute -DNDEBUG: No such file or directory error: command '-DNDEBUG' failed with exit status 1 The more complete text from the install attempt is below. === Port command started with PID 392 Fetching bzip2 Attempting to fetch bzip2-1.0.5.tar.gz from http://www.bzip.org/1.0.5/ Verifying checksum(s) for bzip2 Extracting bzip2 Applying patches to bzip2 Configuring bzip2 Building bzip2 with target all Staging bzip2 into destroot Installing bzip2 1.0.5_1 Activating bzip2 1.0.5_1 Cleaning bzip2 Fetching expat Attempting to fetch expat-2.0.1.tar.gz from http://downloads.sourceforge.net/expat Verifying checksum(s) for expat Extracting expat Configuring expat Building expat with target all Staging expat into destroot Installing expat 2.0.1_0 Activating expat 2.0.1_0 Cleaning expat Fetching gperf Attempting to fetch gperf-3.0.3.tar.gz from http://ftp.gnu.org/gnu/gperf Verifying checksum(s) for gperf Extracting gperf Configuring gperf Building gperf with target all Staging gperf into destroot Installing gperf 3.0.3_0 Activating gperf 3.0.3_0 Cleaning gperf Fetching libiconv Attempting to fetch libiconv-1.12.tar.gz from http://ftp.gnu.org/gnu/libiconv Verifying checksum(s) for libiconv Extracting libiconv Applying patches to libiconv Configuring libiconv Building libiconv with target all Staging libiconv into destroot Installing libiconv 1.12_0 Activating libiconv 1.12_0 Cleaning libiconv Fetching ncursesw Attempting to fetch ncurses-5.6.tar.gz from http://ftp.gnu.org/gnu/ncurses Verifying checksum(s) for ncursesw Extracting ncursesw Applying patches to ncursesw Configuring ncursesw Building ncursesw with target all Staging ncursesw into destroot Installing ncursesw 5.6_1 Activating ncursesw 5.6_1 Cleaning ncursesw Fetching ncurses Verifying checksum(s) for ncurses Extracting ncurses Applying patches to ncurses Configuring ncurses Building ncurses with target all Staging ncurses into destroot Installing ncurses 5.6_0 Activating ncurses 5.6_0 Cleaning ncurses Fetching gettext Attempting to fetch gettext-0.17.tar.gz from http://ftp.gnu.org/gnu/gettext Verifying checksum(s) for gettext Extracting gettext Applying patches to gettext Configuring gettext Building gettext with target all Staging gettext into destroot Installing gettext 0.17_3 Activating gettext 0.17_3 Cleaning gettext Fetching python25 Attempting to fetch Python-2.5.2.tar.bz2 from http://www.python.org//ftp/python/2.5.2/ Verifying checksum(s) for python25 Extracting python25 Applying patches to python25 Configuring python25 Building python25 with target all Staging python25 into destroot Installing python25 2.5.2_2+darwin_9 Activating python25 2.5.2_2+darwin_9 Cleaning python25 Fetching py25-bz2 Verifying checksum(s) for py25-bz2 Extracting py25-bz2 Configuring py25-bz2 Building py25-bz2 with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-bz2/work/Python-2.5.2/Modules" && /opt/local/bin/python2.5 setup.py build " returned error 1 Command output: running build running build_ext building 'bz2' extension creating build creating build/temp.macosx-10.3-i386-2.5 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -I/opt/local/include/ -I/opt/local/include/python2.5 -c bz2module.c -o build/temp.macosx-10.3-i386-2.5/bz2module.o unable to execute -DNDEBUG: No such file or directory error: command '-DNDEBUG' failed with exit status 1 Error: The following dependencies failed to build: bzr py25-bz2 py25-crypto py25-curl curl pkgconfig zlib py25-docutils py25-hashlib openssl py25-paramiko py25-socket-ssl py25-zlib py25-gtk atk glib2 cairo fontconfig freetype libpixman libpng render xrender gtk2 jpeg pango Xft2 xorg-xproto xorg-util-macros shared-mime-info libxml2 p5-xml-parser perl5.8 t iff libglade2 py25-cairo py25-numpy fftw-3 py25-gobject libxslt Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 00:11:00 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 07:11:00 -0000 Subject: [MacPorts] #15621: Installation of epiphany fails on 10.4/PPC Message-ID: <072.2cf4c5ed3fee074073b312bf36c7a2f7@macports.org> #15621: Installation of epiphany fails on 10.4/PPC --------------------------------------------------+------------------------- Reporter: dbonde+bugs+macosforge.org at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------------------+------------------------- Installation of epiphany fails on 10.4/PPC with the error message below: ./configure: line 22906: test: =: unary operator expected checking for poptStrippedArgv in -lpopt... yes checking popt.h usability... yes checking popt.h presence... yes checking for popt.h... yes checking pkg-config is at least version 0.9.0... yes checking for BONOBOUI... configure: error: Package requirements (libgnomecanvas-2.0 >= 1.116.0 libbonobo-2.0 >= 2.13.0 libgnome-2.0 >= 2.13.7 bonobo-activation-2.0 >= 2.13.0 libxml-2.0 >= 2.4.20 gconf-2.0 >= 1.1.9 gtk+-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0 gnome-vfs-2.0 >= 2.8.0 gnome-vfs-module-2.0 > 2.8.0) were not met: Package freetype2 was not found in the pkg-config search path. Perhaps you should add the directory containing `freetype2.pc' to the PKG_CONFIG_PATH environment variable Package 'freetype2', required by 'cairo', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables BONOBOUI_CFLAGS and BONOBOUI_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Error: The following dependencies failed to build: gnome-desktop libgnomeui libbonoboui py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-orbit startup-notification libgnomeprintui libgnomeprint bison libgnomecups Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 00:13:11 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 07:13:11 -0000 Subject: [MacPorts] #15622: Installation of pidgin fails on 10.4/PPC Message-ID: <072.ef0d89924834ba86b3d7fb119bccd7a5@macports.org> #15622: Installation of pidgin fails on 10.4/PPC --------------------------------------------------+------------------------- Reporter: dbonde+bugs+macosforge.org at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------------------+------------------------- Installation of pidgin fails on 10.4/PPC with the following error message: Skipping org.macports.activate (gtk2 +x11) since this port is already active ---> Cleaning gtk2 ---> Fetching libao ---> Attempting to fetch libao-0.8.8.tar.gz from http://downloads.xiph.org/releases/ao/ ---> Verifying checksum(s) for libao ---> Extracting libao ---> Applying patches to libao ---> Configuring libao ---> Building libao with target all ---> Staging libao into destroot ---> Installing libao 0.8.8_2 ---> Activating libao 0.8.8_2 ---> Cleaning libao Skipping org.macports.activate (nspr ) since this port is already active ---> Cleaning nspr ---> Fetching nss ---> Attempting to fetch nss-3.11.9.tar.gz from ftp://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_3_11_9_RTM/src/ ---> Verifying checksum(s) for nss ---> Extracting nss ---> Applying patches to nss ---> Configuring nss ---> Building nss with target all ---> Staging nss into destroot ---> Installing nss 3.11.9_0 ---> Activating nss 3.11.9_0 ---> Cleaning nss ---> Fetching pidgin ---> Attempting to fetch pidgin-2.3.1.tar.bz2 from http://downloads.sourceforge.net/pidgin ---> Verifying checksum(s) for pidgin ---> Extracting pidgin ---> Applying patches to pidgin ---> Configuring pidgin ---> Building pidgin with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.3.1" && make all " returned error 2 Command output: config.status: executing depfiles commands config.status: executing intltool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands cd . && /bin/sh /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.3.1/missing --run autoheader configure.ac:1578: warning: AC_CACHE_VAL(gnutls_libs, ...): suspicious cache-id, must contain _cv_ to be cached ../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from... configure.ac:1578: the top level configure.ac:1736: warning: AC_CACHE_VAL(moz_nspr_libs, ...): suspicious cache-id, must contain _cv_ to be cached configure.ac:1736: the top level configure.ac:1831: warning: AC_CACHE_VAL(moz_nss_libs, ...): suspicious cache-id, must contain _cv_ to be cached configure.ac:1831: the top level rm -f stamp-h1 touch config.h.in cd . && /bin/sh ./config.status config.h config.status: creating config.h make all-recursive Making all in libpurple make all-recursive Making all in gconf LC_ALL=C ../../intltool-merge -s -u -c ../../po/.intltool-merge-cache ../../po purple.schemas.in purple.schemas Possible unintended interpolation of @INTLTOOL_ICONV in string at ../../intltool-merge line 96. Global symbol "@INTLTOOL_ICONV" requires explicit package name at ../../intltool-merge line 96. BEGIN not safe after errors--compilation aborted at ../../intltool-merge line 263. make[4]: *** [purple.schemas] Error 255 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 00:16:27 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 07:16:27 -0000 Subject: [MacPorts] #15622: Installation of pidgin fails on 10.4/PPC In-Reply-To: <072.ef0d89924834ba86b3d7fb119bccd7a5@macports.org> References: <072.ef0d89924834ba86b3d7fb119bccd7a5@macports.org> Message-ID: <081.2e3b77c1b037723cc9fe8499e6d84bc1@macports.org> #15622: Installation of pidgin fails on 10.4/PPC ---------------------------------------------------+------------------------ Reporter: dbonde+bugs+macosforge.org at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------------------+------------------------ Comment (by dbonde+bugs+macosforge.org at gmail.com): Sorry for the unreadable error message. A new attempt: {{{ Skipping org.macports.activate (gtk2 +x11) since this port is already active ---> Cleaning gtk2 ---> Fetching libao ---> Attempting to fetch libao-0.8.8.tar.gz from http://downloads.xiph.org/releases/ao/ ---> Verifying checksum(s) for libao ---> Extracting libao ---> Applying patches to libao ---> Configuring libao ---> Building libao with target all ---> Staging libao into destroot ---> Installing libao 0.8.8_2 ---> Activating libao 0.8.8_2 ---> Cleaning libao Skipping org.macports.activate (nspr ) since this port is already active ---> Cleaning nspr ---> Fetching nss ---> Attempting to fetch nss-3.11.9.tar.gz from ftp://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_3_11_9_RTM/src/ ---> Verifying checksum(s) for nss ---> Extracting nss ---> Applying patches to nss ---> Configuring nss ---> Building nss with target all ---> Staging nss into destroot ---> Installing nss 3.11.9_0 ---> Activating nss 3.11.9_0 ---> Cleaning nss ---> Fetching pidgin ---> Attempting to fetch pidgin-2.3.1.tar.bz2 from http://downloads.sourceforge.net/pidgin ---> Verifying checksum(s) for pidgin ---> Extracting pidgin ---> Applying patches to pidgin ---> Configuring pidgin ---> Building pidgin with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.3.1" && make all " returned error 2 Command output: config.status: executing depfiles commands config.status: executing intltool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands cd . && /bin/sh /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.3.1/missing --run autoheader configure.ac:1578: warning: AC_CACHE_VAL(gnutls_libs, ...): suspicious cache-id, must contain _cv_ to be cached ../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from... configure.ac:1578: the top level configure.ac:1736: warning: AC_CACHE_VAL(moz_nspr_libs, ...): suspicious cache-id, must contain _cv_ to be cached configure.ac:1736: the top level configure.ac:1831: warning: AC_CACHE_VAL(moz_nss_libs, ...): suspicious cache-id, must contain _cv_ to be cached configure.ac:1831: the top level rm -f stamp-h1 touch config.h.in cd . && /bin/sh ./config.status config.h config.status: creating config.h make all-recursive Making all in libpurple make all-recursive Making all in gconf LC_ALL=C ../../intltool-merge -s -u -c ../../po/.intltool-merge-cache ../../po purple.schemas.in purple.schemas Possible unintended interpolation of @INTLTOOL_ICONV in string at ../../intltool-merge line 96. Global symbol "@INTLTOOL_ICONV" requires explicit package name at ../../intltool-merge line 96. BEGIN not safe after errors--compilation aborted at ../../intltool-merge line 263. make[4]: *** [purple.schemas] Error 255 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 00:17:27 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 07:17:27 -0000 Subject: [MacPorts] #15621: Installation of epiphany fails on 10.4/PPC In-Reply-To: <072.2cf4c5ed3fee074073b312bf36c7a2f7@macports.org> References: <072.2cf4c5ed3fee074073b312bf36c7a2f7@macports.org> Message-ID: <081.4b62126cdad29055afc71bb558173b48@macports.org> #15621: Installation of epiphany fails on 10.4/PPC ---------------------------------------------------+------------------------ Reporter: dbonde+bugs+macosforge.org at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------------------------+------------------------ Comment (by dbonde+bugs+macosforge.org at gmail.com): Sorry for the unreadable error message. A new attempt {{{ ./configure: line 22906: test: =: unary operator expected checking for poptStrippedArgv in -lpopt... yes checking popt.h usability... yes checking popt.h presence... yes checking for popt.h... yes checking pkg-config is at least version 0.9.0... yes checking for BONOBOUI... configure: error: Package requirements (libgnomecanvas-2.0 >= 1.116.0 libbonobo-2.0 >= 2.13.0 libgnome-2.0 >= 2.13.7 bonobo-activation-2.0 >= 2.13.0 libxml-2.0 >= 2.4.20 gconf-2.0 >= 1.1.9 gtk+-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0 gnome-vfs-2.0 >= 2.8.0 gnome-vfs-module-2.0 > 2.8.0) were not met: Package freetype2 was not found in the pkg-config search path. Perhaps you should add the directory containing `freetype2.pc' to the PKG_CONFIG_PATH environment variable Package 'freetype2', required by 'cairo', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables BONOBOUI_CFLAGS and BONOBOUI_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Error: The following dependencies failed to build: gnome-desktop libgnomeui libbonoboui py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-orbit startup-notification libgnomeprintui libgnomeprint bison libgnomecups Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 01:41:40 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 08:41:40 -0000 Subject: [MacPorts] #11759: BUG: case-sensitive port uninstall In-Reply-To: <057.05b84e956a5a63148034c136dcfb3720@macports.org> References: <057.05b84e956a5a63148034c136dcfb3720@macports.org> Message-ID: <066.9bda8afa22dbd2617eaf53ceca969eb1@macports.org> #11759: BUG: case-sensitive port uninstall ------------------------------------+--------------------------------------- Reporter: yunzheng.hu at gmail.com | Owner: eridius at macports.org Type: defect | Status: assigned Priority: High | Milestone: MacPorts 1.6.1 Component: base | Version: Resolution: | Keywords: port uninstall case-sensitive ------------------------------------+--------------------------------------- Comment (by pguyot at kallisys.net): I believe it's not. It's used for registry1.0 (to store the path/port mapping of every file in the system) and in the trace code (as a path/port mapping temporarily used during build). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 02:11:35 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 09:11:35 -0000 Subject: [MacPorts] #15619: sudo port install pallet fails via bad path In-Reply-To: <055.6b9e1d2c291cf4cbfa296c6bceb243c9@macports.org> References: <055.6b9e1d2c291cf4cbfa296c6bceb243c9@macports.org> Message-ID: <064.20f77d85c4a46fa7d714f73310d38c57@macports.org> #15619: sudo port install pallet fails via bad path ----------------------------------+----------------------------------------- Reporter: markmi at dsl-only.net | Owner: rhwood at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ----------------------------------+----------------------------------------- Changes (by rhwood at macports.org): * status: new => closed * resolution: => fixed Comment: In r37596 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 02:41:06 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 09:41:06 -0000 Subject: [MacPorts] #15526: error installing rb-rubygems on Leopard 10.5.3 In-Reply-To: <055.1569bbbb58e38d45057841d81df7de00@macports.org> References: <055.1569bbbb58e38d45057841d81df7de00@macports.org> Message-ID: <064.3d6f0beb651b5c1f244ca42944d6dd1d@macports.org> #15526: error installing rb-rubygems on Leopard 10.5.3 ----------------------------------+----------------------------------------- Reporter: bobby.carbn at mac.com | Owner: pguyot at kallisys.net Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: 10.5.3 metaslpoit3 rb-rails ----------------------------------+----------------------------------------- Changes (by pguyot at kallisys.net): * status: new => closed * resolution: => duplicate Comment: Dup of #15177. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 02:44:09 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 09:44:09 -0000 Subject: [MacPorts] #15332: ocaml: parallel build problem In-Reply-To: <059.850c091a01f920375fe60074748220da@macports.org> References: <059.850c091a01f920375fe60074748220da@macports.org> Message-ID: <068.3d249841b5efa3aba3be6198f8cfcd04@macports.org> #15332: ocaml: parallel build problem --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: pguyot at kallisys.net Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: --------------------------------------+------------------------------------- Changes (by pguyot at kallisys.net): * status: new => closed * resolution: => fixed Comment: Reporter committed the fix in r37523. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 03:18:47 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 10:18:47 -0000 Subject: [MacPorts] #15254: rb-rubygems 1.1.1_0 fails on Staging phase In-Reply-To: <062.f79906738c9944e52859ecc0ae371580@macports.org> References: <062.f79906738c9944e52859ecc0ae371580@macports.org> Message-ID: <071.17bb4d1e03e37a42f5efd88294f19d0f@macports.org> #15254: rb-rubygems 1.1.1_0 fails on Staging phase -----------------------------------------+---------------------------------- Reporter: lsproc at exclaim-project.org | Owner: pguyot at kallisys.net Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: rb-rubygems -----------------------------------------+---------------------------------- Changes (by pguyot at kallisys.net): * status: new => closed * resolution: => duplicate Comment: Definitely a dup of #15177. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 03:21:11 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 10:21:11 -0000 Subject: [MacPorts] #14414: rb-daemons Fails to install In-Reply-To: <053.2a91729470f84bd04b7f6162574876a2@macports.org> References: <053.2a91729470f84bd04b7f6162574876a2@macports.org> Message-ID: <062.4b2a215a20d4664ccb8c550f7c2c06fe@macports.org> #14414: rb-daemons Fails to install --------------------------------+------------------------------------------- Reporter: dave at frascone.com | Owner: pguyot at kallisys.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ruby rb-rubygems rb-daemons --------------------------------+------------------------------------------- Comment (by pguyot at kallisys.net): Probably a dup of #15177. Which version of autoconf do you have? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 04:23:40 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 11:23:40 -0000 Subject: [MacPorts] #15528: ruby @1.8.6-p114 patch to get Ruby's Socket classes to work with getaddrinfo under 10.5.3 In-Reply-To: <068.5c7bc2e8e5b7f32c6551678d21337474@macports.org> References: <068.5c7bc2e8e5b7f32c6551678d21337474@macports.org> Message-ID: <077.d0bbc87d52ef871d7c045900d2bc819a@macports.org> #15528: ruby @1.8.6-p114 patch to get Ruby's Socket classes to work with getaddrinfo under 10.5.3 -----------------------------------------------+---------------------------- Reporter: aguynamedryan+macports at gmail.com | Owner: pguyot at kallisys.net Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ruby getaddrinfo 10.5.3 drb TCPServer -----------------------------------------------+---------------------------- Changes (by pguyot at kallisys.net): * status: new => closed * resolution: => fixed Comment: Thanks for the patch. I've included it in r37600. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 04:23:47 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 11:23:47 -0000 Subject: [MacPorts] #15231: ruby-1.8.6-p114 unwanted patch for lib/rexml In-Reply-To: <054.cf68712fb25e9606fe4a01b897306a35@macports.org> References: <054.cf68712fb25e9606fe4a01b897306a35@macports.org> Message-ID: <063.e5d58c42418a7e3eda476fc82f38a283@macports.org> #15231: ruby-1.8.6-p114 unwanted patch for lib/rexml ---------------------------------+------------------------------------------ Reporter: kimuraw at i.nifty.jp | Owner: pguyot at kallisys.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment (by pguyot at kallisys.net): Fixed in r37600. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 04:24:15 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 11:24:15 -0000 Subject: [MacPorts] #15177: ruby-1.8.6-p111+ doesn't work with autoconf-2.62 In-Reply-To: <060.eb3f8d51ccb4cfc8bd021ceddd7e108a@macports.org> References: <060.eb3f8d51ccb4cfc8bd021ceddd7e108a@macports.org> Message-ID: <069.4809c60a3d914197de0d6bab5dfb5365@macports.org> #15177: ruby-1.8.6-p111+ doesn't work with autoconf-2.62 ---------------------------------------+------------------------------------ Reporter: joseph at josephholsten.com | Owner: pguyot at kallisys.net Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ruby autoconf ---------------------------------------+------------------------------------ Changes (by pguyot at kallisys.net): * status: new => closed * resolution: => fixed Comment: Fixed in r37600. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 04:24:23 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 11:24:23 -0000 Subject: [MacPorts] #15231: ruby-1.8.6-p114 unwanted patch for lib/rexml In-Reply-To: <054.cf68712fb25e9606fe4a01b897306a35@macports.org> References: <054.cf68712fb25e9606fe4a01b897306a35@macports.org> Message-ID: <063.37ac399584a8a4c5caece2ef5f7dfbcc@macports.org> #15231: ruby-1.8.6-p114 unwanted patch for lib/rexml ---------------------------------+------------------------------------------ Reporter: kimuraw at i.nifty.jp | Owner: pguyot at kallisys.net Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: ---------------------------------+------------------------------------------ Changes (by pguyot at kallisys.net): * status: new => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 04:35:55 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 11:35:55 -0000 Subject: [MacPorts] #15623: guide (trunk) Documentation missing for several Tcl extenstions (pextlib1.0) Message-ID: <057.f6aec7b35764d6e05aa4164f5b9cd4ac@macports.org> #15623: guide (trunk) Documentation missing for several Tcl extenstions (pextlib1.0) -----------------------------------+---------------------------------------- Reporter: febeling at macports.org | Owner: markd at macports.org Type: defect | Status: new Priority: Normal | Milestone: Website & Documentation Component: guide | Version: 1.6.0 Keywords: | -----------------------------------+---------------------------------------- Many of the Pextlib commands are undocumented, among them prominent ones like "system". {{{ system flock readdir strsed mkstemp mktemp md5 fs-traverse filemap rpm-vercomp rmd160 sha1 compat umask sudo mkfifo unixsocketpair mkchannelfromfd pipe curl symlink unsetenv readline rl_history getuid geteuid getgid getegid setuid seteuid setgid setegid name_to_uid uid_to_name name_to_gid gid_to_name tracelib }}} See the definition of the extension here: http://trac.macports.org/browser/trunk/base/src/pextlib1.0/Pextlib.c#L1167 The list is compiled by copying those minus the ones which actually are documented here in the guide. http://guide.macports.org/#reference.tcl-extensions Not sure if some of these should stay undocumented because they are rather implementation detail or "private", but most look quite generally applicable. The related list discussion was this: http://www.mail-archive.com/macports- dev at lists.macosforge.org/msg05179.html -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 04:50:04 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 11:50:04 -0000 Subject: [MacPorts] #15606: QEMu Port Won't Install In-Reply-To: <059.33025d83e3c4f1d221f85591be9c4d6b@macports.org> References: <059.33025d83e3c4f1d221f85591be9c4d6b@macports.org> Message-ID: <068.53579478aa2e36b083729d47492e36f0@macports.org> #15606: QEMu Port Won't Install --------------------------------------+------------------------------------- Reporter: james.herdman at gmail.com | Owner: pmq at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by pmq at macports.org): I think this is a duplicate, see Ticket #10842 and confirm. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 05:17:51 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 12:17:51 -0000 Subject: [MacPorts] #15616: New port: py-cython and py25-cython In-Reply-To: <053.72fb424ba97fe2daac69baa69266c181@macports.org> References: <053.72fb424ba97fe2daac69baa69266c181@macports.org> Message-ID: <062.b57e15ddee0d41c390dd754772dec067@macports.org> #15616: New port: py-cython and py25-cython --------------------------------+------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: akira at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: cython --------------------------------+------------------------------------------- Changes (by akira at macports.org): * keywords: => cython * owner: macports-tickets at lists.macosforge.org => akira at macports.org * status: new => assigned * type: defect => enhancement Comment: I'll take this. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Jun 15 05:36:04 2008 From: noreply at macports.org (MacPorts) Date: Sun, 15 Jun 2008 12:36:04 -0000 Subject: [MacPorts] #15616: New port: py-cython and py25-cython In-Reply-To: <053.72fb424ba97fe2daac69baa69266c181@macports.org> References: <053.72fb424ba97fe2daac69baa69266c181@macports.org> Message-ID: <062.f37dba8b7a76425acbdfb994e155fb29@macports.org> #15616: New port: py-cython and py25-cython --------------------------------+------------------------------------------- Reporter: ajb78 at cornell.edu | Owner: akira at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: cython