From noreply at macports.org Wed Oct 1 04:52:33 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 11:52:33 -0000 Subject: [MacPorts] #16708: python25 build failure In-Reply-To: <054.f39ee343d9837883ee48e1db2e4302a3@macports.org> References: <054.f39ee343d9837883ee48e1db2e4302a3@macports.org> Message-ID: <063.56207514cb1251712f5d2b85a718b298@macports.org> #16708: python25 build failure ---------------------------------+------------------------------------------ Reporter: asbjorn at ulsberg.no | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: python build Port: python25 | ---------------------------------+------------------------------------------ Comment(by asbjorn at ulsberg.no): Uploaded the log file. After doing what the log file says at the end: {{{ sudo port install python_select sudo python_select python25 }}} Python 2.5 now seems to be installed successfully. Weird. The port I want installed is cvs2svn, so doing the same there, first yielded an error about py25-hashlib and py25-zlib not installing correctly. Manually installing those with the same procedure first and then cvs2svn after, yielded success and cvs2svn is now installed. Not sure what to make of that, but the problems started while trying to install cvs2svn directly without any of the dependencies in place first. Do you have any explanations to this? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 05:50:04 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 12:50:04 -0000 Subject: [MacPorts] #16670: arpwatch ... incomplete installation In-Reply-To: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> References: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> Message-ID: <069.00b7648c8d4c4b9924c92330fc61ca35@macports.org> #16670: arpwatch ... incomplete installation ---------------------------------------+------------------------------------ Reporter: mark at dxradio.demon.co.uk | Owner: pmq at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: arpwatch | ---------------------------------------+------------------------------------ Comment(by pmq at macports.org): Could you clean and re-try? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 06:12:00 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 13:12:00 -0000 Subject: [MacPorts] #16684: Portfile for project 'ledger', a command-line accounting tool In-Reply-To: <054.09a75578ba4e119fc3abce46ff731262@macports.org> References: <054.09a75578ba4e119fc3abce46ff731262@macports.org> Message-ID: <063.414fc4b9e01dc78532f289afe14bbd38@macports.org> #16684: Portfile for project 'ledger', a command-line accounting tool ---------------------------------+------------------------------------------ Reporter: jwiegley at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: ledger | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * port: => ledger Comment: A few notes: -The maintainer needs to be a full email address. -The primary category should be accounting or finance, I don't believe office fits at all. Given there a few ports are under finance and none under accounting, i suggest the former as the primary category. Otherwise it looks good. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 06:48:45 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 13:48:45 -0000 Subject: [MacPorts] #16670: arpwatch ... incomplete installation In-Reply-To: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> References: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> Message-ID: <069.b33623c41e2538c55761bc356d538840@macports.org> #16670: arpwatch ... incomplete installation ---------------------------------------+------------------------------------ Reporter: mark at dxradio.demon.co.uk | Owner: pmq at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: arpwatch | ---------------------------------------+------------------------------------ Comment(by mark at dxradio.demon.co.uk): OK done a sudo port clean --all all (takes ages) now arpwatch installs without the Error as shown above. but sudo arpwatch -d still doesn't work as arpwatch can't find a arp.dat file creating one manually localhost:~ user$ cd /opt/local/sbin/ localhost:/opt/local/sbin user$ sudo touch arp.dat allows it to run -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 07:10:41 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 14:10:41 -0000 Subject: [MacPorts] #16670: arpwatch ... incomplete installation In-Reply-To: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> References: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> Message-ID: <069.e9e1b3519415ecb37c8af580e44d3623@macports.org> #16670: arpwatch ... incomplete installation ---------------------------------------+------------------------------------ Reporter: mark at dxradio.demon.co.uk | Owner: pmq at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: arpwatch | ---------------------------------------+------------------------------------ Comment(by pmq at macports.org): Forget '-d', I just told you that so you could see the mails being prepared. The interesting switch is '-f'. See my previous example. The previous commits fixed the linking with pcap, not the rest. The only remaining point for me is the ethercodes.dat one. All of the others are non-issues IMHO (see my previous explanations). I'll fix the ethercodes.dat one with a proper patch in the near future. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 07:15:14 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 14:15:14 -0000 Subject: [MacPorts] #16666: Update apple-gcc42 to rev 5564 and include c++ suport In-Reply-To: <056.0acce84b441ebe1c8bf8895bd2a8fc44@macports.org> References: <056.0acce84b441ebe1c8bf8895bd2a8fc44@macports.org> Message-ID: <065.1ad4000def09f8aba102df8c908b6e30@macports.org> #16666: Update apple-gcc42 to rev 5564 and include c++ suport -----------------------------------+---------------------------------------- Reporter: illogical1 at gmail.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: apple-gcc42 c++ inline-asm apple gcc Port: apple-gcc42 | -----------------------------------+---------------------------------------- Changes (by macsforever2000 at macports.org): * cc: illogical1 at gmail.com (removed) * owner: macports-tickets at lists.macosforge.org => mww at macports.org * type: enhancement => defect Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 08:40:15 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 15:40:15 -0000 Subject: [MacPorts] #16684: Portfile for project 'ledger', a command-line accounting tool In-Reply-To: <054.09a75578ba4e119fc3abce46ff731262@macports.org> References: <054.09a75578ba4e119fc3abce46ff731262@macports.org> Message-ID: <063.6601bf5a5647ab1ce4edf98ef4219b4b@macports.org> #16684: Portfile for project 'ledger', a command-line accounting tool ---------------------------------+------------------------------------------ Reporter: jwiegley at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: ledger | ---------------------------------+------------------------------------------ Comment(by jwiegley at gmail.com): The maintainer's full address is johnw at newartisans.com. And I didn't see the finance category somehow, I think that's a much better choice. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 09:10:34 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 16:10:34 -0000 Subject: [MacPorts] #16666: Update apple-gcc42 to rev 5564 and include c++ suport In-Reply-To: <056.0acce84b441ebe1c8bf8895bd2a8fc44@macports.org> References: <056.0acce84b441ebe1c8bf8895bd2a8fc44@macports.org> Message-ID: <065.9936e75407df8fe5e2244287aa874aa4@macports.org> #16666: Update apple-gcc42 to rev 5564 and include c++ suport -----------------------------------+---------------------------------------- Reporter: illogical1 at gmail.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: apple-gcc42 c++ inline-asm apple gcc Port: apple-gcc42 | -----------------------------------+---------------------------------------- Comment(by illogical1 at gmail.com): I can now confirm that apple-gcc42 rev 5564 (not 5563) fixes the bug experienced when compiling inline-asm code. As stated before the older apple-gcc42 (rev 5551?) which is currently in macports has problems with this type of code. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 09:10:54 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 16:10:54 -0000 Subject: [MacPorts] #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp-parser.c In-Reply-To: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> References: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> Message-ID: <069.df1931d7d73977fe8b30f5232e060294@macports.org> #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp- parser.c ---------------------------------------+------------------------------------ Reporter: pgijnxn02 at sneakemail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: build, typo Port: gnucash | ---------------------------------------+------------------------------------ Comment(by pgijnxn02 at sneakemail.com): This remains true in 2.2.7_1. gnc-module.c and gnc-exp-parser.c won't build until I modify the MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 09:11:21 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 16:11:21 -0000 Subject: [MacPorts] #16712: UPGRADE: gconf-editor to 2.24.0.1 In-Reply-To: <054.f0cba7d7c1d9aced31114cbf443fde36@macports.org> References: <054.f0cba7d7c1d9aced31114cbf443fde36@macports.org> Message-ID: <063.a89b56e3ca37fbeecb415300f834549b@macports.org> #16712: UPGRADE: gconf-editor to 2.24.0.1 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: gconf-editor gnome Port: gconf-editor | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * milestone: Port Bugs => Port Updates -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 09:23:50 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 16:23:50 -0000 Subject: [MacPorts] #16709: UPGRADE: atk to 1.24.0 In-Reply-To: <054.f8470722af5f26a5f8bf0dfb0ec6a86c@macports.org> References: <054.f8470722af5f26a5f8bf0dfb0ec6a86c@macports.org> Message-ID: <063.fdef7157b3f9a1db88da1ab235072b93@macports.org> #16709: UPGRADE: atk to 1.24.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: atk Port: atk | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 09:24:13 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 16:24:13 -0000 Subject: [MacPorts] #16709: UPGRADE: atk to 1.24.0 In-Reply-To: <054.f8470722af5f26a5f8bf0dfb0ec6a86c@macports.org> References: <054.f8470722af5f26a5f8bf0dfb0ec6a86c@macports.org> Message-ID: <063.e8afdd39bd92c8a971ff720cdbb118e9@macports.org> #16709: UPGRADE: atk to 1.24.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: atk Port: atk | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Thanks, committed in r40423. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 09:36:53 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 16:36:53 -0000 Subject: [MacPorts] #16710: UPGRADE: at-spi to 1.24.0 In-Reply-To: <054.37d4e2929ddf164298b1806bb33fe1ef@macports.org> References: <054.37d4e2929ddf164298b1806bb33fe1ef@macports.org> Message-ID: <063.c75966b72c7eab2da3008ec095a92f82@macports.org> #16710: UPGRADE: at-spi to 1.24.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: at-spi Port: at-spi | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 09:38:58 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 16:38:58 -0000 Subject: [MacPorts] #16710: UPGRADE: at-spi to 1.24.0 In-Reply-To: <054.37d4e2929ddf164298b1806bb33fe1ef@macports.org> References: <054.37d4e2929ddf164298b1806bb33fe1ef@macports.org> Message-ID: <063.853567b8af8cb6a92f6d867213cce8b6@macports.org> #16710: UPGRADE: at-spi to 1.24.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: at-spi Port: at-spi | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Thanks, committed in r40424. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 10:01:06 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 17:01:06 -0000 Subject: [MacPorts] #16711: UPGRADE: libgnomeprint to 2.18.5 In-Reply-To: <054.7d48a3a412e4543be92e793a749c4440@macports.org> References: <054.7d48a3a412e4543be92e793a749c4440@macports.org> Message-ID: <063.afb122595d397961f2498802dba47861@macports.org> #16711: UPGRADE: libgnomeprint to 2.18.5 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: gnome libgnomeprint Port: libgnomeprint | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 10:01:30 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 17:01:30 -0000 Subject: [MacPorts] #16711: UPGRADE: libgnomeprint to 2.18.5 In-Reply-To: <054.7d48a3a412e4543be92e793a749c4440@macports.org> References: <054.7d48a3a412e4543be92e793a749c4440@macports.org> Message-ID: <063.81d2d6ef71c6a923e6fc493afde43022@macports.org> #16711: UPGRADE: libgnomeprint to 2.18.5 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: gnome libgnomeprint Port: libgnomeprint | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Thanks, committed in r40425. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 10:10:12 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 17:10:12 -0000 Subject: [MacPorts] #16712: UPGRADE: gconf-editor to 2.24.0.1 In-Reply-To: <054.f0cba7d7c1d9aced31114cbf443fde36@macports.org> References: <054.f0cba7d7c1d9aced31114cbf443fde36@macports.org> Message-ID: <063.d726b536adefc24aaec80d54b4795a7d@macports.org> #16712: UPGRADE: gconf-editor to 2.24.0.1 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: gconf-editor gnome Port: gconf-editor | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => jmr at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 10:10:48 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 17:10:48 -0000 Subject: [MacPorts] #16712: UPGRADE: gconf-editor to 2.24.0.1 In-Reply-To: <054.f0cba7d7c1d9aced31114cbf443fde36@macports.org> References: <054.f0cba7d7c1d9aced31114cbf443fde36@macports.org> Message-ID: <063.637ea46da5ffe2b21d047117ccc942b1@macports.org> #16712: UPGRADE: gconf-editor to 2.24.0.1 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: jmr at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: gconf-editor gnome Port: gconf-editor | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: assigned => closed * resolution: => fixed Comment: Thanks, committed in r40426. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 10:21:37 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 17:21:37 -0000 Subject: [MacPorts] #16713: desktop-file-utils-0.15 fetch failure Message-ID: <055.b812f76a8703df466471ad4f7856bafc@macports.org> #16713: desktop-file-utils-0.15 fetch failure ---------------------------------+------------------------------------------ Reporter: warren at ualberta.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ---------------------------------+------------------------------------------ The fetch of desktop-file-utils fails for me, during an install of gimp. I believe that this is a case problem in the url, probably due to a project site change. The [http://www.freedesktop.org/Software/desktop- file-utils/releases/ fetch link] redirects to a wiki error page, while the [http://www.freedesktop.org/Software/desktop-file-utils/releases/ lowercase version] links to an httpd file listing. {{{ >sudo port install gimp ... ---> Fetching desktop-file-utils ---> Attempting to fetch desktop-file-utils-0.15.tar.gz from http://www.freedesktop.org/Software/desktop-file-utils/releases/ ---> Attempting to fetch desktop-file-utils-0.15.tar.gz from http://svn.macports.org/repository/macports/distfiles/desktop-file-utils ---> Attempting to fetch desktop-file-utils-0.15.tar.gz from http://svn.macports.org/repository/macports/distfiles/general/ ---> Attempting to fetch desktop-file-utils-0.15.tar.gz from http://svn.macports.org/repository/macports/downloads/desktop-file-utils Error: Target org.macports.fetch returned: fetch failed }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 10:25:34 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 17:25:34 -0000 Subject: [MacPorts] #16713: desktop-file-utils-0.15 fetch failure In-Reply-To: <055.b812f76a8703df466471ad4f7856bafc@macports.org> References: <055.b812f76a8703df466471ad4f7856bafc@macports.org> Message-ID: <064.191a10e6c5f0731cffde0e99406dcc00@macports.org> #16713: desktop-file-utils-0.15 fetch failure ----------------------------------+----------------------------------------- Reporter: warren at ualberta.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by warren at ualberta.net): Typo: The [http://www.freedesktop.org/software/desktop-file- utils/releases/ lowercase version] above isn't actually lowercase. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 10:53:41 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 17:53:41 -0000 Subject: [MacPorts] #16714: gtypist violates the layout of the ports-filesystems Message-ID: <060.214da0b5f136b42ee8e4467fedebbf8b@macports.org> #16714: gtypist violates the layout of the ports-filesystems --------------------------------------+------------------------------------- Reporter: pgijnxn02 at sneakemail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: gtypist --------------------------------------+------------------------------------- Port tells me that we need to "fix or indicate this misbehavior" : {{{ sudo port upgrade -cuv gtypist ---> Fetching gtypist ---> Attempting to fetch gtypist-2.7.tar.gz from ftp://ftp.uu.net/archive/systems/gnu/gtypist ---> Attempting to fetch gtypist-2.7.tar.gz from http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gtypist ---> Verifying checksum(s) for gtypist ---> Extracting gtypist ---> Configuring gtypist ---> Building gtypist ---> Staging gtypist into destroot Warning: violation by /opt/local/info Warning: violation by /opt/local/man Warning: gtypist violates the layout of the ports-filesystems! Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases! ---> Packaging tgz archive for gtypist 2.7_0 ---> Installing gtypist @2.7_0 ---> Activating gtypist @2.7_0 ---> Cleaning gtypist }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 11:01:04 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 18:01:04 -0000 Subject: [MacPorts] #16713: desktop-file-utils-0.15 fetch failure In-Reply-To: <055.b812f76a8703df466471ad4f7856bafc@macports.org> References: <055.b812f76a8703df466471ad4f7856bafc@macports.org> Message-ID: <064.bd04877016bfcb4b6cdb4d69b5837136@macports.org> #16713: desktop-file-utils-0.15 fetch failure ----------------------------------+----------------------------------------- Reporter: warren at ualberta.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: desktop-file-utils | ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => fixed * port: => desktop-file-utils Comment: Fixed in r40427. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 11:02:29 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 18:02:29 -0000 Subject: [MacPorts] #16714: gtypist violates the layout of the ports-filesystems In-Reply-To: <060.214da0b5f136b42ee8e4467fedebbf8b@macports.org> References: <060.214da0b5f136b42ee8e4467fedebbf8b@macports.org> Message-ID: <069.86416401bb530ea206015761d942f108@macports.org> #16714: gtypist violates the layout of the ports-filesystems ---------------------------------------+------------------------------------ Reporter: pgijnxn02 at sneakemail.com | Owner: jkinross at mac.com Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: gtypist | ---------------------------------------+------------------------------------ Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * owner: macports-tickets at lists.macosforge.org => jkinross at mac.com Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 11:22:59 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 18:22:59 -0000 Subject: [MacPorts] #16715: FIX: inkscape-0.46 fails to compile with recent gtk2 ports Message-ID: <054.2db98a76fbbd68c286e5cdd1a2a46c08@macports.org> #16715: FIX: inkscape-0.46 fails to compile with recent gtk2 ports --------------------------------+------------------------------------------- Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: inkscape gtk+ gtk2 | Port: inkscape --------------------------------+------------------------------------------- Attached patch fixes compile problem with versions of gtk2 >= 2.13.3 See [https://bugs.launchpad.net/inkscape/+bug/246868] for details -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 11:25:12 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 18:25:12 -0000 Subject: [MacPorts] #16716: glib1 universal build error Message-ID: <056.978e0a9fd420887ab3083b477c3897e6@macports.org> #16716: glib1 universal build error -----------------------------------------+---------------------------------- Reporter: verwymeren at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: glib1 universal build error | Port: glib1 -----------------------------------------+---------------------------------- Attempting to install glib1 using the universal variant (sudo port install glib1 +universal) results in the following build error: {{{ ld: symbol(s) not found for architecture ppc collect2: ld returned 1 exit status lipo: can't open input file: /var/tmp//ccqLfmL6.out (No such file or directory) }}} Attached is a log with the complete build output. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 11:35:44 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 18:35:44 -0000 Subject: [MacPorts] #16670: arpwatch ... incomplete installation In-Reply-To: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> References: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> Message-ID: <069.fb110d62f165cb6d2ab8735c565dcc63@macports.org> #16670: arpwatch ... incomplete installation ---------------------------------------+------------------------------------ Reporter: mark at dxradio.demon.co.uk | Owner: pmq at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: arpwatch | ---------------------------------------+------------------------------------ Comment(by pmq at macports.org): Just committed r40428. Please test. If it's OK, then we have the following situation: * dependency on libpcap: done * ethercodes.dat: didn't use your suggestion, the file stays where it is but the code is patched to find it here. Same as Debian for that matter. Done. * arp.dat: I'm not in favor of creating the arp.dat file because this would replace on upgrade the one users have. * massagevendor: it'd be cool to have in ${prefix}/bin, but we'd need to patch it to find the awk scripts in ${prefix}/share, because I'm not for installing these in ${prefix}/bin. BTW, why are you suggesting sbin? * downloading the newest oui.txt: not MacPorts' job, besides it makes builds not reproducible. So I consider the ticket corrected; tell me if you feel something more should be done. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 11:45:52 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 18:45:52 -0000 Subject: [MacPorts] #16717: octave 3.0.X crashes on "save -text" using gcc43 variant Message-ID: <056.bf22f483d8736971abfbe8b19c6e1dee@macports.org> #16717: octave 3.0.X crashes on "save -text" using gcc43 variant ----------------------------------+----------------------------------------- Reporter: andrew at fernandes.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: octave gcc43 | Port: octave ----------------------------------+----------------------------------------- When octave 3.0.{1,2} is built with the gcc43 variant, 'save -text' or 'save -ascii' causes a core-dump and crash. I believe that the issue is related to using apple's default gcc-4.0 with Fortran from gcc-mp-4.3. Changing the entire default toolchain to gcc-mp-4.3 restored proper behaviour. Trivial patch attached. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 11:49:12 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 18:49:12 -0000 Subject: [MacPorts] #16716: glib1 universal build error In-Reply-To: <056.978e0a9fd420887ab3083b477c3897e6@macports.org> References: <056.978e0a9fd420887ab3083b477c3897e6@macports.org> Message-ID: <065.74fabd6df4f6fb8a4e2092cfc72b323c@macports.org> #16716: glib1 universal build error -----------------------------------+---------------------------------------- Reporter: verwymeren at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: glib1 universal build error Port: glib1 | -----------------------------------+---------------------------------------- Comment(by verwymeren at gmail.com): Build was attempted using Mac OS X 10.5.5. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 12:12:58 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 19:12:58 -0000 Subject: [MacPorts] #16684: Portfile for project 'ledger', a command-line accounting tool In-Reply-To: <054.09a75578ba4e119fc3abce46ff731262@macports.org> References: <054.09a75578ba4e119fc3abce46ff731262@macports.org> Message-ID: <063.63723c67466398feeb83e9428aa0048b@macports.org> #16684: Portfile for project 'ledger', a command-line accounting tool ---------------------------------+------------------------------------------ Reporter: jwiegley at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: ledger | ---------------------------------+------------------------------------------ Comment(by blb at macports.org): Replying to [comment:1 macsforever2000@?]: > -The primary category should be accounting or finance, I don't believe office fits at all. Given there a few ports are under finance and none under accounting, i suggest the former as the primary category. Note there is no accounting or finance for primary (eg, directory) category, so office (or math) would make the most sense. You can put any other things which make sense after that though, so finance would be fine second (or third...). So the way it is now looks fine. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 12:16:44 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 19:16:44 -0000 Subject: [MacPorts] #16699: subversion 1.5.2 short description comment about CVS is unprofessional and irritating In-Reply-To: <049.4acd5b8d6b4579ee6a5650ce1c05a041@macports.org> References: <049.4acd5b8d6b4579ee6a5650ce1c05a041@macports.org> Message-ID: <058.99f78e9c7c8043c40c71968e848a8f5d@macports.org> #16699: subversion 1.5.2 short description comment about CVS is unprofessional and irritating -------------------------------+-------------------------------------------- Reporter: moody at isi.edu | Owner: dluke at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Website & Documentation Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: subversion Port: subversion 1.5.2 | -------------------------------+-------------------------------------------- Changes (by dluke at macports.org): * status: assigned => closed * resolution: => fixed Comment: Even though I think it didn't really need to be changed, and that the old description was a little charming (and quirky), I've updated the short description. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 12:17:40 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 19:17:40 -0000 Subject: [MacPorts] #16717: octave 3.0.X crashes on "save -text" using gcc43 variant In-Reply-To: <056.bf22f483d8736971abfbe8b19c6e1dee@macports.org> References: <056.bf22f483d8736971abfbe8b19c6e1dee@macports.org> Message-ID: <065.e286b1741a4feb409350cc056060560a@macports.org> #16717: octave 3.0.X crashes on "save -text" using gcc43 variant -----------------------------------+---------------------------------------- Reporter: andrew at fernandes.org | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: octave gcc43 Port: octave | -----------------------------------+---------------------------------------- Changes (by blb at macports.org): * cc: alakazam at melix.net (added) * owner: macports-tickets at lists.macosforge.org => stechert at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 13:43:50 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 20:43:50 -0000 Subject: [MacPorts] #16718: objc_encoding.m does not compile Message-ID: <055.21eb635915fa980a70fa841dac929a0d@macports.org> #16718: objc_encoding.m does not compile ---------------------------------+------------------------------------------ Reporter: milosh at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | Port: ---------------------------------+------------------------------------------ compiling macports trunk fails with objc_encoding.m:45:20: warning: ctypes.h: No such file or directory objc_encoding.m: In function ?objc_to_tclobj?: objc_encoding.m:59: error: ?intptr_t? undeclared (first use in this function) objc_encoding.m:59: error: (Each undeclared identifier is reported only once objc_encoding.m:59: error: for each function it appears in.) objc_encoding.m:59: error: expected ?)? before ?val? make: *** [objc_encoding.o] Error 1 Regression caused by r40058. Note: uname -a Linux 2.6.26-1-686 #1 SMP ... i686 GNU/Linux -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 13:47:50 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 20:47:50 -0000 Subject: [MacPorts] #16719: rdesktop-1.6.0 fails to compile Message-ID: <049.f2b2935874f4a165de869ecb79ad16f8@macports.org> #16719: rdesktop-1.6.0 fails to compile ---------------------------+------------------------------------------------ Reporter: gpf at gpf.me.uk | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: rdesktop ---------------------------+------------------------------------------------ {{{ ---> Fetching rdesktop ---> Attempting to fetch rdesktop-1.6.0.tar.gz from http://downloads.sourceforge.net/rdesktop ---> Verifying checksum(s) for rdesktop ---> Extracting rdesktop ---> Configuring rdesktop ---> Building rdesktop with target rdesktop Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rdesktop/work/rdesktop-1.6.0" && make rdesktop " returned error 2 Command output: /usr/bin/gcc-4.0 -O2 -Wall -I/usr/include -I/usr/X11/include -DPACKAGE_NAME=\"rdesktop\" -DPACKAGE_TARNAME=\"rdesktop\" -DPACKAGE_VERSION=\"1.6.0\" -DPACKAGE_STRING=\"rdesktop\ 1.6.0\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DL_ENDIAN=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_FILIO_H=1 -DHAVE_LOCALE_H=1 -DHAVE_LANGINFO_H=1 -Dssldir=\"/usr\" -DEGD_SOCKET=\"/var/run/egd-pool\" -DWITH_RDPSND=1 -DHAVE_DIRENT_H=1 -DHAVE_DECL_DIRFD=1 -DHAVE_ICONV_H=1 -DHAVE_ICONV=1 -DICONV_CONST= -DHAVE_SYS_STATVFS_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_SYS_MOUNT_H=1 -DSTAT_STATVFS=1 -DHAVE_STRUCT_STATVFS_F_NAMEMAX=1 -DKEYMAP_PATH=\"/opt/local/share/rdesktop/keymaps/\" -o mppc.o -c mppc.c /usr/bin/gcc-4.0 -O2 -Wall -I/usr/include -I/usr/X11/include -DPACKAGE_NAME=\"rdesktop\" -DPACKAGE_TARNAME=\"rdesktop\" -DPACKAGE_VERSION=\"1.6.0\" -DPACKAGE_STRING=\"rdesktop\ 1.6.0\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DL_ENDIAN=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_FILIO_H=1 -DHAVE_LOCALE_H=1 -DHAVE_LANGINFO_H=1 -Dssldir=\"/usr\" -DEGD_SOCKET=\"/var/run/egd-pool\" -DWITH_RDPSND=1 -DHAVE_DIRENT_H=1 -DHAVE_DECL_DIRFD=1 -DHAVE_ICONV_H=1 -DHAVE_ICONV=1 -DICONV_CONST= -DHAVE_SYS_STATVFS_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_SYS_MOUNT_H=1 -DSTAT_STATVFS=1 -DHAVE_STRUCT_STATVFS_F_NAMEMAX=1 -DKEYMAP_PATH=\"/opt/local/share/rdesktop/keymaps/\" -o pstcache.o -c pstcache.c /usr/bin/gcc-4.0 -O2 -Wall -I/usr/include -I/usr/X11/include -DPACKAGE_NAME=\"rdesktop\" -DPACKAGE_TARNAME=\"rdesktop\" -DPACKAGE_VERSION=\"1.6.0\" -DPACKAGE_STRING=\"rdesktop\ 1.6.0\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DL_ENDIAN=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_FILIO_H=1 -DHAVE_LOCALE_H=1 -DHAVE_LANGINFO_H=1 -Dssldir=\"/usr\" -DEGD_SOCKET=\"/var/run/egd-pool\" -DWITH_RDPSND=1 -DHAVE_DIRENT_H=1 -DHAVE_DECL_DIRFD=1 -DHAVE_ICONV_H=1 -DHAVE_ICONV=1 -DICONV_CONST= -DHAVE_SYS_STATVFS_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_SYS_MOUNT_H=1 -DSTAT_STATVFS=1 -DHAVE_STRUCT_STATVFS_F_NAMEMAX=1 -DKEYMAP_PATH=\"/opt/local/share/rdesktop/keymaps/\" -o lspci.o -c lspci.c /usr/bin/gcc-4.0 -O2 -Wall -I/usr/include -I/usr/X11/include -DPACKAGE_NAME=\"rdesktop\" -DPACKAGE_TARNAME=\"rdesktop\" -DPACKAGE_VERSION=\"1.6.0\" -DPACKAGE_STRING=\"rdesktop\ 1.6.0\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DL_ENDIAN=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_FILIO_H=1 -DHAVE_LOCALE_H=1 -DHAVE_LANGINFO_H=1 -Dssldir=\"/usr\" -DEGD_SOCKET=\"/var/run/egd-pool\" -DWITH_RDPSND=1 -DHAVE_DIRENT_H=1 -DHAVE_DECL_DIRFD=1 -DHAVE_ICONV_H=1 -DHAVE_ICONV=1 -DICONV_CONST= -DHAVE_SYS_STATVFS_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_SYS_MOUNT_H=1 -DSTAT_STATVFS=1 -DHAVE_STRUCT_STATVFS_F_NAMEMAX=1 -DKEYMAP_PATH=\"/opt/local/share/rdesktop/keymaps/\" -o seamless.o -c seamless.c /usr/bin/gcc-4.0 -O2 -Wall -I/usr/include -I/usr/X11/include -DPACKAGE_NAME=\"rdesktop\" -DPACKAGE_TARNAME=\"rdesktop\" -DPACKAGE_VERSION=\"1.6.0\" -DPACKAGE_STRING=\"rdesktop\ 1.6.0\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DL_ENDIAN=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_FILIO_H=1 -DHAVE_LOCALE_H=1 -DHAVE_LANGINFO_H=1 -Dssldir=\"/usr\" -DEGD_SOCKET=\"/var/run/egd-pool\" -DWITH_RDPSND=1 -DHAVE_DIRENT_H=1 -DHAVE_DECL_DIRFD=1 -DHAVE_ICONV_H=1 -DHAVE_ICONV=1 -DICONV_CONST= -DHAVE_SYS_STATVFS_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_SYS_MOUNT_H=1 -DSTAT_STATVFS=1 -DHAVE_STRUCT_STATVFS_F_NAMEMAX=1 -DKEYMAP_PATH=\"/opt/local/share/rdesktop/keymaps/\" -o ssl.o -c ssl.c /usr/bin/gcc-4.0 -O2 -Wall -I/usr/include -I/usr/X11/include -DPACKAGE_NAME=\"rdesktop\" -DPACKAGE_TARNAME=\"rdesktop\" -DPACKAGE_VERSION=\"1.6.0\" -DPACKAGE_STRING=\"rdesktop\ 1.6.0\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DL_ENDIAN=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_FILIO_H=1 -DHAVE_LOCALE_H=1 -DHAVE_LANGINFO_H=1 -Dssldir=\"/usr\" -DEGD_SOCKET=\"/var/run/egd-pool\" -DWITH_RDPSND=1 -DHAVE_DIRENT_H=1 -DHAVE_DECL_DIRFD=1 -DHAVE_ICONV_H=1 -DHAVE_ICONV=1 -DICONV_CONST= -DHAVE_SYS_STATVFS_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_SYS_MOUNT_H=1 -DSTAT_STATVFS=1 -DHAVE_STRUCT_STATVFS_F_NAMEMAX=1 -DKEYMAP_PATH=\"/opt/local/share/rdesktop/keymaps/\" -o rdesktop rdesktop.o xwin.o xkeymap.o ewmhints.o xclip.o cliprdr.o rdpsnd.o rdpsnd_dsp.o tcp.o iso.o mcs.o secure.o licence.o rdp.o orders.o bitmap.o cache.o rdp5.o channels.o rdpdr.o serial.o printer.o disk.o parallel.o printercache.o mppc.o pstcache.o lspci.o seamless.o ssl.o -L/opt/local/lib -L/usr/lib -lcrypto -liconv -L/usr/X11/lib -R/usr/X11/lib -lX11 Undefined symbols: "_iconv", referenced from: _xclip_send_data_with_convert in xclip.o _ui_clip_handle_data in xclip.o _rdp_out_unistr in rdp.o _rdp_out_unistr in rdp.o _rdp_in_unistr in rdp.o "_iconv_open", referenced from: _xclip_send_data_with_convert in xclip.o _xclip_send_data_with_convert in xclip.o _xclip_send_data_with_convert in xclip.o _ui_clip_handle_data in xclip.o _rdp_out_unistr in rdp.o _rdp_in_unistr in rdp.o "_iconv_close", referenced from: _xclip_send_data_with_convert in xclip.o _ui_clip_handle_data in xclip.o _ui_clip_handle_data in xclip.o _rdp_out_unistr in rdp.o _rdp_out_unistr in rdp.o _rdp_in_unistr in rdp.o ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [rdesktop] Error 1 Error: Status 1 encountered during processing. }}} OSX 10.5.5 x86 Core Duo Macbook Not sure how much difference it makes but I have X11 2.3.1 from xquartz.macosforge.org installed. If you need any more info let me know. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:02:19 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:02:19 -0000 Subject: [MacPorts] #16719: rdesktop-1.6.0 fails to compile In-Reply-To: <049.f2b2935874f4a165de869ecb79ad16f8@macports.org> References: <049.f2b2935874f4a165de869ecb79ad16f8@macports.org> Message-ID: <058.6e0d8c5edc49ed98331a2b9f44188f89@macports.org> #16719: rdesktop-1.6.0 fails to compile ----------------------------+----------------------------------------------- Reporter: gpf at gpf.me.uk | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: Port: rdesktop | ----------------------------+----------------------------------------------- Changes (by jmr at macports.org): * cc: noses at noses.com, cshbell at gmail.com (added) * status: new => closed * resolution: => duplicate Comment: Duplicate of #13055. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:02:37 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:02:37 -0000 Subject: [MacPorts] #16670: arpwatch ... incomplete installation In-Reply-To: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> References: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> Message-ID: <069.56d4b506dc23d06ffd7b995ebc8460fa@macports.org> #16670: arpwatch ... incomplete installation ---------------------------------------+------------------------------------ Reporter: mark at dxradio.demon.co.uk | Owner: pmq at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: arpwatch | ---------------------------------------+------------------------------------ Comment(by mark at dxradio.demon.co.uk): Downloaded MacPorts base version 1.600 The MacPorts installation is not outdated and so was not updated selfupdate done! localhost:~ user$ sudo port uninstall arpwatch ---> Deactivating arpwatch 2.1a15_1 ---> Uninstalling arpwatch 2.1a15_1 localhost:~ user$ sudo port uninstall libpcap ---> Deactivating libpcap 0.9.8_0 ---> Uninstalling libpcap 0.9.8_0 localhost:~ user$ sudo port clean libpcap ---> Cleaning libpcap localhost:~ user$ sudo port clean arpwatch ---> Cleaning arpwatch localhost:~ user$ sudo port install arpwatch ---> Fetching libpcap ---> Attempting to fetch libpcap-0.9.8.tar.gz from http://www.tcpdump.org/release/ ---> Verifying checksum(s) for libpcap ---> Extracting libpcap ---> Applying patches to libpcap ---> Configuring libpcap ---> Building libpcap with target all ---> Staging libpcap into destroot ---> Installing libpcap 0.9.8_0 ---> Activating libpcap 0.9.8_0 ---> Cleaning libpcap ---> Fetching arpwatch ---> Attempting to fetch arpwatch-2.1a15.tar.gz from ftp://ftp.ee.lbl.gov ---> Verifying checksum(s) for arpwatch ---> Extracting arpwatch ---> Configuring arpwatch ---> Building arpwatch with target all ---> Staging arpwatch into destroot ---> Installing arpwatch 2.1a15_2 ---> Activating arpwatch 2.1a15_2 ---> Cleaning arpwatch localhost:~ user$ I'm only suggesting sbin because originally that's where everything else ended up needing to be put so as to be used by the program ... arp.dat ethercodes.dat ... If there's a better standard place to put it/them then fine. Ubuntu 8.04 also just piled all of them into the same directory. I created a directory /opt/local/var/arpwatch and created (by touch) arp.dat in /opt/local/var/arpwatch/ arpwatch "sees" the ethercodes.dat file in the place the installation put it. arpwatch seems happy. So yes everything intended seems to have been done and works. Thank you. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:03:10 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:03:10 -0000 Subject: [MacPorts] #13055: rdesktop doesn't build on Mac OS X 10.5 Leopard In-Reply-To: <055.167d67313a947d4f1098672801c1e7cc@macports.org> References: <055.167d67313a947d4f1098672801c1e7cc@macports.org> Message-ID: <064.25fba9beb4e31eff69429e901553eb22@macports.org> #13055: rdesktop doesn't build on Mac OS X 10.5 Leopard ----------------------------------+----------------------------------------- Reporter: saispo at mandriva.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: rdesktop | ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * cc: gpf at gpf.me.uk (added) * status: closed => reopened * resolution: worksforme => Comment: Reopening, and adding reporter of duplicate #16719 to cc. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:05:38 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:05:38 -0000 Subject: [MacPorts] #13055: rdesktop doesn't build on Mac OS X 10.5 Leopard In-Reply-To: <055.167d67313a947d4f1098672801c1e7cc@macports.org> References: <055.167d67313a947d4f1098672801c1e7cc@macports.org> Message-ID: <064.a241eea6114690f3fe020234536f493a@macports.org> #13055: rdesktop doesn't build on Mac OS X 10.5 Leopard ----------------------------------+----------------------------------------- Reporter: saispo at mandriva.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: rdesktop | ----------------------------------+----------------------------------------- Comment(by cshbell at gmail.com): Any reason we can't simply remove libiconv as a dependency from the Portfile? We should get this resolved. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:08:43 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:08:43 -0000 Subject: [MacPorts] #16716: glib1 universal build error In-Reply-To: <056.978e0a9fd420887ab3083b477c3897e6@macports.org> References: <056.978e0a9fd420887ab3083b477c3897e6@macports.org> Message-ID: <065.7bb61aa98bfb7850228d9f82e46eff2d@macports.org> #16716: glib1 universal build error -----------------------------------+---------------------------------------- Reporter: verwymeren at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: glib1 universal build error Port: glib1 | -----------------------------------+---------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) Comment: It's unlikely that anyone will bother to produce a working universal variant for glib1. I'll disable it and call it a day. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:10:48 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:10:48 -0000 Subject: [MacPorts] #16716: glib1 universal build error In-Reply-To: <056.978e0a9fd420887ab3083b477c3897e6@macports.org> References: <056.978e0a9fd420887ab3083b477c3897e6@macports.org> Message-ID: <065.b8a39e9f79a88400433b8796e351c1a1@macports.org> #16716: glib1 universal build error -----------------------------------+---------------------------------------- Reporter: verwymeren at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: glib1 universal build error Port: glib1 | -----------------------------------+---------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => wontfix Comment: Universal variant disabled in r40433. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:12:57 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:12:57 -0000 Subject: [MacPorts] #16718: objc_encoding.m does not compile In-Reply-To: <055.21eb635915fa980a70fa841dac929a0d@macports.org> References: <055.21eb635915fa980a70fa841dac929a0d@macports.org> Message-ID: <064.aa7b95727288083335e086714e239c0c@macports.org> #16718: objc_encoding.m does not compile ----------------------------------+----------------------------------------- Reporter: milosh at macports.org | Owner: toby at macports.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => toby at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:16:06 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:16:06 -0000 Subject: [MacPorts] #13055: rdesktop doesn't build on Mac OS X 10.5 Leopard In-Reply-To: <055.167d67313a947d4f1098672801c1e7cc@macports.org> References: <055.167d67313a947d4f1098672801c1e7cc@macports.org> Message-ID: <064.a079023730bdba7c265e6575c4d9ccad@macports.org> #13055: rdesktop doesn't build on Mac OS X 10.5 Leopard ----------------------------------+----------------------------------------- Reporter: saispo at mandriva.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: rdesktop | ----------------------------------+----------------------------------------- Comment(by jmr at macports.org): Users will often have libiconv installed as a dependency of something else. Just removing the dependency isn't a real fix. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:30:47 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:30:47 -0000 Subject: [MacPorts] #13055: rdesktop doesn't build on Mac OS X 10.5 Leopard In-Reply-To: <055.167d67313a947d4f1098672801c1e7cc@macports.org> References: <055.167d67313a947d4f1098672801c1e7cc@macports.org> Message-ID: <064.25c21024a8ec44d96d0f91ddf799b6e3@macports.org> #13055: rdesktop doesn't build on Mac OS X 10.5 Leopard ----------------------------------+----------------------------------------- Reporter: saispo at mandriva.org | Owner: cshbell at gmail.com Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: rdesktop | ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * cc: cshbell at gmail.com (removed) * owner: macports-tickets at lists.macosforge.org => cshbell at gmail.com * status: reopened => new Comment: Attached patch may help. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 14:33:32 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 21:33:32 -0000 Subject: [MacPorts] #16718: objc_encoding.m does not compile In-Reply-To: <055.21eb635915fa980a70fa841dac929a0d@macports.org> References: <055.21eb635915fa980a70fa841dac929a0d@macports.org> Message-ID: <064.a68dd2dc9c255b92276687ad0bdeeabf@macports.org> #16718: objc_encoding.m does not compile ----------------------------------+----------------------------------------- Reporter: milosh at macports.org | Owner: toby at macports.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Old description: > compiling macports trunk fails with > > objc_encoding.m:45:20: warning: ctypes.h: No such file or directory > objc_encoding.m: In function ?objc_to_tclobj?: > objc_encoding.m:59: error: ?intptr_t? undeclared (first use in this > function) > objc_encoding.m:59: error: (Each undeclared identifier is reported only > once > objc_encoding.m:59: error: for each function it appears in.) > objc_encoding.m:59: error: expected ?)? before ?val? > make: *** [objc_encoding.o] Error 1 > > Regression caused by r40058. > Note: uname -a > Linux 2.6.26-1-686 #1 SMP ... i686 GNU/Linux New description: compiling macports trunk fails with {{{ objc_encoding.m:45:20: warning: ctypes.h: No such file or directory objc_encoding.m: In function ?objc_to_tclobj?: objc_encoding.m:59: error: ?intptr_t? undeclared (first use in this function) objc_encoding.m:59: error: (Each undeclared identifier is reported only once objc_encoding.m:59: error: for each function it appears in.) objc_encoding.m:59: error: expected ?)? before ?val? make: *** [objc_encoding.o] Error 1 }}} Regression caused by r40058. Note: uname -a Linux 2.6.26-1-686 #1 SMP ... i686 GNU/Linux -- Comment(by blb at macports.org): Isn't intptr_t C99-only? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 15:35:14 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 22:35:14 -0000 Subject: [MacPorts] #16720: gnome-desktop 2.24.0 build failure Message-ID: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> #16720: gnome-desktop 2.24.0 build failure ---------------------------------+------------------------------------------ Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: gnome-desktop ---------------------------------+------------------------------------------ I get the following error when I want to upgrade gnome-desktop: {{{ /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -DGNOMELOCALEDIR=\"/opt/local/share/locale\" -DGNOME_DESKTOP_SYSCONFDIR=\"/opt/local/etc\" -DGNOME_DESKTOP_PIXMAPDIR=\"/opt/local/share/pixmaps\" -DGNOME_DESKTOP_ICONDIR=\"/opt/local/share/icons\" -DGNOME_CORE_INTERNAL -DDATADIR=\"/opt/local/share/gnome-desktop\" -Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wno-sign-compare -I/usr/X11R6/include -DXTHREADS -DORBIT2=1 -D_REENTRANT -I/opt/local/include/libxml2 -I/opt/local/include/gtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/libgnomeui-2.0 -I/opt/local/include/libart-2.0 -I/opt/local/include/gconf/2 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libgnome-2.0 -I/opt/local/include/libbonoboui-2.0 -I/opt/local/include/libgnomecanvas-2.0 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include -I/opt/local/include/orbit-2.0 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo- activation-2.0 -I/opt/local/include/gail-1.0 -I/opt/local/include/startup- notification-1.0 -I/opt/local/include -O2 -MT gnome-rr.lo -MD -MP -MF .deps/gnome-rr.Tpo -c gnome-rr.c -fno-common -DPIC -o .libs/gnome-rr.o gnome-rr.c:46: error: parse error before 'XRRScreenResources' gnome-rr.c:46: warning: no semicolon at end of struct or union gnome-rr.c:53: error: parse error before '}' token gnome-rr.c:73: error: parse error before 'RROutput' gnome-rr.c:73: warning: no semicolon at end of struct or union gnome-rr.c:85: error: parse error before '}' token [...] }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 15:56:00 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 22:56:00 -0000 Subject: [MacPorts] #16718: objc_encoding.m does not compile In-Reply-To: <055.21eb635915fa980a70fa841dac929a0d@macports.org> References: <055.21eb635915fa980a70fa841dac929a0d@macports.org> Message-ID: <064.8f384cd946554583836fa571b7d1b40e@macports.org> #16718: objc_encoding.m does not compile ----------------------------------+----------------------------------------- Reporter: milosh at macports.org | Owner: toby at macports.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by toby at macports.org): Linux? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 15:58:01 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 22:58:01 -0000 Subject: [MacPorts] #16718: objc_encoding.m does not compile In-Reply-To: <055.21eb635915fa980a70fa841dac929a0d@macports.org> References: <055.21eb635915fa980a70fa841dac929a0d@macports.org> Message-ID: <064.1929e00d1fb4bd8c51f40b57fbea2dd9@macports.org> #16718: objc_encoding.m does not compile ----------------------------------+----------------------------------------- Reporter: milosh at macports.org | Owner: toby at macports.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by toby at macports.org): Is it defined in a header on your system, perhaps stdint.h ? Seems like it'd be harmless enough to start including it. I only tested on 10.5/10.6 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 16:54:18 2008 From: noreply at macports.org (MacPorts) Date: Wed, 01 Oct 2008 23:54:18 -0000 Subject: [MacPorts] #13961: approach to perl5.8 as a universal variant In-Reply-To: <057.fe2eca5c6493650b1aad276fc149aa46@macports.org> References: <057.fe2eca5c6493650b1aad276fc149aa46@macports.org> Message-ID: <066.4913582cefdb212389ace541f3456f84@macports.org> #13961: approach to perl5.8 as a universal variant ------------------------------------+--------------------------------------- Reporter: reiffert at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: perl5.8 | ------------------------------------+--------------------------------------- Changes (by blb at macports.org): * port: => perl5.8 Comment: Attaching an updated version of reiffert@'s patch, which uses MacPorts' configure.universal_sysroot in place of hard-coding the SDK (plus a touch of cleanup). Instead of replacing the darwin hints patch, repeating the bind9 workaround, this just adds a second patch for universal support only. So far, I've only tested a couple of built modules (p5-compress-raw-zlib and p5-net-ssleay), but they build universal and pass their 'make test' just fine. One point of confusion is that building the modules is going to follow how perl5.8 is built, in that if perl is built universal, p5-* ports are going to be universal even without '+universal'... Patch is based in /trunk/dports/lang so cd there to apply (includes both Portfile diff and the new patch). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 17:22:19 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 00:22:19 -0000 Subject: [MacPorts] #16715: FIX: inkscape-0.46 fails to compile with recent gtk2 ports In-Reply-To: <054.2db98a76fbbd68c286e5cdd1a2a46c08@macports.org> References: <054.2db98a76fbbd68c286e5cdd1a2a46c08@macports.org> Message-ID: <063.980fd06cba83646a725e688069f44a4c@macports.org> #16715: FIX: inkscape-0.46 fails to compile with recent gtk2 ports ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: High | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: inkscape gtk+ gtk2 Port: inkscape | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * status: new => closed * resolution: => fixed Comment: Committed in r40435. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 19:10:46 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 02:10:46 -0000 Subject: [MacPorts] #16721: help2man-1.36.4 add support for universal builds Message-ID: <052.b4747ae2607f597961f3c1cd89b090a1@macports.org> #16721: help2man-1.36.4 add support for universal builds ------------------------------+--------------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Keywords: | Port: help2man ------------------------------+--------------------------------------------- Short patch to get help2man to build universal (just the locale hack bundle, since help2man itself is just a perl script, so technically that would need #13961). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 19:34:09 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 02:34:09 -0000 Subject: [MacPorts] #16530: taglib 1.5 universal variant build error In-Reply-To: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> References: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> Message-ID: <065.a575bbc5d1ffb4f55e076e10f408523b@macports.org> #16530: taglib 1.5 universal variant build error -----------------------------------+---------------------------------------- Reporter: verwymeren at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: taglib universal build error Port: taglib | -----------------------------------+---------------------------------------- Changes (by blb at macports.org): * cc: blb at macports.org (added) Comment: Attaching a patch which gets taglib to build universal. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 20:43:51 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 03:43:51 -0000 Subject: [MacPorts] #16722: cd-discid home is not correct Message-ID: <058.3394a26083355dc17496225305d66b01@macports.org> #16722: cd-discid home is not correct ------------------------------------+--------------------------------------- Reporter: TimothyC.Lee at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ------------------------------------+--------------------------------------- cd-discid will fail to download. Change master_sites to: http://lly.org/~rcw/cd-discid/ and everything works! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 1 22:40:01 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 05:40:01 -0000 Subject: [MacPorts] #16723: unify the python portgroups Message-ID: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> #16723: unify the python portgroups ------------------------------+--------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Keywords: | Port: ------------------------------+--------------------------------------------- The current practice of having separate ports of modules for each python version is awkward, and will get far worse now that python 2.6 and 3.0 are being released. Here is a portgroup that should be able to replace the current python25 and python24 groups, and can install for any combination of the available python versions at once via variants. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 00:57:37 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 07:57:37 -0000 Subject: [MacPorts] #16720: gnome-desktop 2.24.0 build failure In-Reply-To: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> References: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> Message-ID: <064.0d21525ae27e22974494332cfb913024@macports.org> #16720: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gnome-desktop | ----------------------------------+----------------------------------------- Comment(by vinc17 at macports.org): This was under Mac OS X 10.4.11. I've looked as the preprocessed output, and the problem is that XRRScreenResources is never defined. This seems to be the same problem as [http://live.gnome.org/JhbuildIssues/gnome- desktop]. It is said that libXrandr >= 1.2 is needed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 00:59:05 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 07:59:05 -0000 Subject: [MacPorts] #16722: cd-discid home is not correct In-Reply-To: <058.3394a26083355dc17496225305d66b01@macports.org> References: <058.3394a26083355dc17496225305d66b01@macports.org> Message-ID: <067.cdff4fd368f897ded21e571e6ba760b3@macports.org> #16722: cd-discid home is not correct -------------------------------------+-------------------------------------- Reporter: TimothyC.Lee at gmail.com | Owner: jrdittmann at wisc.edu Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: cd-discid | -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * owner: macports-tickets at lists.macosforge.org => jrdittmann at wisc.edu * port: => cd-discid Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 02:19:53 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 09:19:53 -0000 Subject: [MacPorts] #16724: Update: py25-django-devel to 1.0 Message-ID: <053.7ef146d35f3b184f705f37450ba1e98d@macports.org> #16724: Update: py25-django-devel to 1.0 -------------------------------+-------------------------------------------- Reporter: andi at saerdnaer.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: py25-django-devel -------------------------------+-------------------------------------------- it would be nice, if this port would be updated to 1.0 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 02:24:34 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 09:24:34 -0000 Subject: [MacPorts] #16725: Update py-django-devel to newest version Message-ID: <053.cd6fbb0614b9b69b3c5bc529471260c7@macports.org> #16725: Update py-django-devel to newest version -------------------------------+-------------------------------------------- Reporter: andi at saerdnaer.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: py-django-devel -------------------------------+-------------------------------------------- The portfile is for version 0.96.1 but the current stable version is 1.0. It would be nice if someone would update this. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 02:30:19 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 09:30:19 -0000 Subject: [MacPorts] #16724: Update: py25-django-devel to 1.0 In-Reply-To: <053.7ef146d35f3b184f705f37450ba1e98d@macports.org> References: <053.7ef146d35f3b184f705f37450ba1e98d@macports.org> Message-ID: <062.9280bd57d0b708e8d95acdb6019cacb7@macports.org> #16724: Update: py25-django-devel to 1.0 --------------------------------+------------------------------------------- Reporter: andi at saerdnaer.de | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: py25-django-devel | --------------------------------+------------------------------------------- Changes (by toby at macports.org): * owner: macports-tickets at lists.macosforge.org => stechert at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 02:30:44 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 09:30:44 -0000 Subject: [MacPorts] #16724: Update: py25-django-devel to 1.0 In-Reply-To: <053.7ef146d35f3b184f705f37450ba1e98d@macports.org> References: <053.7ef146d35f3b184f705f37450ba1e98d@macports.org> Message-ID: <062.3088875f5941428201a8bfeec129eec6@macports.org> #16724: Update: py25-django-devel to 1.0 --------------------------------+------------------------------------------- Reporter: andi at saerdnaer.de | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: py25-django-devel | --------------------------------+------------------------------------------- Changes (by toby at macports.org): * cc: stechertatmacports.org (removed) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 05:06:14 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 12:06:14 -0000 Subject: [MacPorts] #16505: rrdtool 1.3.3 build fails (internal link edit command failed) In-Reply-To: <055.576c191634b31a7471d6a4453cce05d0@macports.org> References: <055.576c191634b31a7471d6a4453cce05d0@macports.org> Message-ID: <064.590631f6e8ee6e8db7176d4880040efb@macports.org> #16505: rrdtool 1.3.3 build fails (internal link edit command failed) ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: markd at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: rrdtool | ----------------------------------+----------------------------------------- Comment(by chrisric at routemaster.net): Hi - Is there a fix out for this yet? Thanks. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 05:22:49 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 12:22:49 -0000 Subject: [MacPorts] #16551: p5-mac-carbon does not install without forcing (-f) In-Reply-To: <057.c4b5779e61735f20979b2dc5934222a9@macports.org> References: <057.c4b5779e61735f20979b2dc5934222a9@macports.org> Message-ID: <066.85c545162af02e6cc209d00aebc00feb@macports.org> #16551: p5-mac-carbon does not install without forcing (-f) ------------------------------------+--------------------------------------- Reporter: febeling at macports.org | Owner: sal at email.arc.nasa.gov Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: p5-mac-carbon | ------------------------------------+--------------------------------------- Changes (by febeling at macports.org): * status: new => closed * resolution: => fixed Comment: Fixed in r40448, after maintainer timeout. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 05:47:03 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 12:47:03 -0000 Subject: [MacPorts] #16726: openssl fails to compile universal on Tiger PPC Message-ID: <059.1a2b8b44a918b71e4bb3100e22e9f8cb@macports.org> #16726: openssl fails to compile universal on Tiger PPC -----------------------------------------+---------------------------------- Reporter: gianluca.toso at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: openssl universal tiger ppc | Port: openssl -----------------------------------------+---------------------------------- openssl 0.9.8i (and older) fails to compile as universal binary on Tiger PPC: {{{ Error: Target org.macports.build returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_openssl/work/i386 && make all" returned error 2 Command output: _fwrite$UNIX2003 _strerror _strtoul ___tolower _strcat ___stderrp ___stdinp _sigaction _tcgetattr _tcsetattr _getegid _geteuid _getgid _getuid _gmtime _fstat _open _dlclose _dlerror _dlopen _dlsym _sprintf _memcpy referenced from libz expected to be defined in /usr/lib/libSystem.B.dylib _memset referenced from libz expected to be defined in /usr/lib/libSystem.B.dylib _free referenced from libz expected to be defined in /usr/lib/libSystem.B.dylib _malloc referenced from libz expected to be defined in /usr/lib/libSystem.B.dylib collect2: ld returned 1 exit status make[2]: *** [link_app.darwin] Error 1 make[1]: *** [openssl] Error 2 make: *** [build_apps] Error 1 }}} This because system libraries aren't universal, so it must use the developer SDK (-isysroot ...), at least for the intel compile. In attachment my simple patch. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 07:31:29 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 14:31:29 -0000 Subject: [MacPorts] #16726: openssl fails to compile universal on Tiger PPC In-Reply-To: <059.1a2b8b44a918b71e4bb3100e22e9f8cb@macports.org> References: <059.1a2b8b44a918b71e4bb3100e22e9f8cb@macports.org> Message-ID: <068.3ea70b00ff2b927b5299892aa8493f90@macports.org> #16726: openssl fails to compile universal on Tiger PPC --------------------------------------+------------------------------------- Reporter: gianluca.toso at gmail.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: openssl universal tiger ppc Port: openssl | --------------------------------------+------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => mww at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 09:40:36 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 16:40:36 -0000 Subject: [MacPorts] #16718: objc_encoding.m does not compile In-Reply-To: <055.21eb635915fa980a70fa841dac929a0d@macports.org> References: <055.21eb635915fa980a70fa841dac929a0d@macports.org> Message-ID: <064.628ad1c92345b1120a99bc34d8400c58@macports.org> #16718: objc_encoding.m does not compile ----------------------------------+----------------------------------------- Reporter: milosh at macports.org | Owner: toby at macports.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by milosh at macports.org): Yep, adding a {{{ #include }}} makes intptr_t known. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 09:49:41 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 16:49:41 -0000 Subject: [MacPorts] #16727: sphinx-0.9.8 Make MySQL optional if using PostgreSQL for Sphinx Message-ID: <049.42a6b101f0c61c4247c848a795d91aae@macports.org> #16727: sphinx-0.9.8 Make MySQL optional if using PostgreSQL for Sphinx ---------------------------+------------------------------------------------ Reporter: pete at mdsc.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | Port: sphinx ---------------------------+------------------------------------------------ The newly added PostgreSQL 8.3 variant for Sphinx is great, but the build fails if MySQL isn't installed, and there's no way to remove MySQL support. I've rearranged the Portfile to turn MySQL support into a default variant. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 09:49:41 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 16:49:41 -0000 Subject: [MacPorts] #14535: courier-authlib 0.60.0 won't start In-Reply-To: <056.d325866057cbc08d0649ddf50de4fc4c@macports.org> References: <056.d325866057cbc08d0649ddf50de4fc4c@macports.org> Message-ID: <065.06be850104a5d989e927324bad70b51e@macports.org> #14535: courier-authlib 0.60.0 won't start -----------------------------------+---------------------------------------- Reporter: kulesa.qpy at pobox.com | Owner: boeyms at macports.org Type: defect | Status: closed Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: | -----------------------------------+---------------------------------------- Changes (by boeyms at macports.org): * status: new => closed * resolution: => fixed Comment: No response received, so I assume that the problem has been fixed. Closing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 09:57:46 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 16:57:46 -0000 Subject: [MacPorts] #13729: Compiler gives error when attempting install of dirmngr In-Reply-To: <051.b49cfa4337c7a880a4f8fa85b93c440f@macports.org> References: <051.b49cfa4337c7a880a4f8fa85b93c440f@macports.org> Message-ID: <060.4e0a6881dabe97c1684fb1a58426c60c@macports.org> #13729: Compiler gives error when attempting install of dirmngr ------------------------------+--------------------------------------------- Reporter: Apple at royds.net | Owner: boeyms at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: | ------------------------------+--------------------------------------------- Changes (by boeyms at macports.org): * status: new => closed * resolution: => fixed Comment: Fixed in changeset:40454, which also updates dirmngr to version 1.0.2. At least for 1.0.2, it turns out the {{{$(LIBINTL)}}} had to be added to {{{LDADD}}} as well. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 10:01:47 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 17:01:47 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 Message-ID: <054.f5240959e50b35a3338641c30722057e@macports.org> #16728: Error Installing exiv2 --------------------------------+------------------------------------------- Reporter: jsnodgra at umich.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: --------------------------------+------------------------------------------- On Mac0S 10.4.11, I receive this error when attempting to install exiv2: ---> Building exiv2 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exiv2/work/exiv2-0.17.1" && make all " returned error 2 Command output: if test "x1" = "x1"; then cd xmpsdk/src && make xmpsdk; fi; make[1]: Nothing to be done for `xmpsdk'. cd src && make all Any help is appreciated! Thanks. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 10:13:09 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 17:13:09 -0000 Subject: [MacPorts] #15352: gpg-agent portfile diff for version 2.0.9 (was: gpg-agent portfile dif for version 2.0.9) In-Reply-To: <054.a15de50dba16226e04b8984c2fc654ea@macports.org> References: <054.a15de50dba16226e04b8984c2fc654ea@macports.org> Message-ID: <063.d9247157c1a24fb33987682f3739a6f5@macports.org> #15352: gpg-agent portfile diff for version 2.0.9 ---------------------------------+------------------------------------------ Reporter: Philip at kime.org.uk | Owner: boeyms at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gpg-agent gnupg2 Port: gpg-agent | ---------------------------------+------------------------------------------ Changes (by boeyms at macports.org): * status: new => closed * resolution: => fixed Comment: Patch applied in changeset:40457, and patch-configure.diff removed in changeset:40456. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 10:39:38 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 17:39:38 -0000 Subject: [MacPorts] #15948: nginx 0.5.34 - Update to 0.6.32 In-Reply-To: <057.61bc5b78a3c34f2cae17751ba723be88@macports.org> References: <057.61bc5b78a3c34f2cae17751ba723be88@macports.org> Message-ID: <066.4e7b7e2173a45b233411e57bb1dea680@macports.org> #15948: nginx 0.5.34 - Update to 0.6.32 ------------------------------------+--------------------------------------- Reporter: richard at return0.co.uk | Owner: boeyms at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: nginx Port: | ------------------------------------+--------------------------------------- Changes (by boeyms at macports.org): * status: new => closed * resolution: => fixed Comment: Split into logically separate patches and applied in changeset:40461, changeset:40462 and changeset:40463. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 11:23:24 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 18:23:24 -0000 Subject: [MacPorts] #13401: git-core with +svn produces a git-svn that uses the wrong perl binary In-Reply-To: <055.3b7fee75e68a29891e6b87d0c7b98431@macports.org> References: <055.3b7fee75e68a29891e6b87d0c7b98431@macports.org> Message-ID: <064.98b022220c51ec7157b446b9cec41f78@macports.org> #13401: git-core with +svn produces a git-svn that uses the wrong perl binary ----------------------------------+----------------------------------------- Reporter: tim.stoop at gmail.com | Owner: bryan at larsen.st Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: git-svn git-core perl Port: | ----------------------------------+----------------------------------------- Changes (by boeyms at macports.org): * cc: maccheck at gmail.com (added) * owner: boeyms at macports.org => bryan at larsen.st Comment: Reassigning to one of the port maintainers, and cc'ing to the other named maintainer. I can confirm that, as of version 1.6.0.2, the initial 2 lines of {{{git-svn}}}, which is now at {{{/opt/local/libexec/git-svn}}}, are: {{{ #!/usr/bin/perl use lib (split(/:/, $ENV{GITPERLLIB} || "/opt/local/lib/perl5/site_perl")); }}} so I assume that this still is a problem. In any case, we should be consistent about using MacPorts' perl. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 11:26:31 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 18:26:31 -0000 Subject: [MacPorts] #16729: graphics/babl-0.0.22: new port Message-ID: <054.1c69484347adb5fc1963ec0ccb9194cb@macports.org> #16729: graphics/babl-0.0.22: new port --------------------------------+------------------------------------------- Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: graphics babl | Port: babl --------------------------------+------------------------------------------- Babl is a library for dynamically handling pixel formats and managing conversions between them. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 11:32:51 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 18:32:51 -0000 Subject: [MacPorts] #16589: DEFECT: ffmpeg -version fails to report correct svn revision In-Reply-To: <054.702dda5647a78ea51173cc1a7b929e07@macports.org> References: <054.702dda5647a78ea51173cc1a7b929e07@macports.org> Message-ID: <063.f5dacaf5aaf173ee53a75c4d53e39eb4@macports.org> #16589: DEFECT: ffmpeg -version fails to report correct svn revision ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: ffmpeg Port: ffmpeg | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 11:34:47 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 18:34:47 -0000 Subject: [MacPorts] #16589: DEFECT: ffmpeg -version fails to report correct svn revision In-Reply-To: <054.702dda5647a78ea51173cc1a7b929e07@macports.org> References: <054.702dda5647a78ea51173cc1a7b929e07@macports.org> Message-ID: <063.63f794870e9d0acbd487efb0d094aee3@macports.org> #16589: DEFECT: ffmpeg -version fails to report correct svn revision ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: ffmpeg Port: ffmpeg | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40473. Thanks and sorry for the delay! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 11:35:00 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 18:35:00 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port Message-ID: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> #16730: graphics/gegl-0.0.18: new port -----------------------------------+---------------------------------------- Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: gegl image processing | Port: gegl -----------------------------------+---------------------------------------- GEGL is a graph based image processing framework offering image processing and compositing on large images. GEGL is suitable for projects ranging from small one-off projects to interactive applications. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 11:38:21 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 18:38:21 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.4dbc0f7dc34de834643015b8cfa94826@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Note that gegl is dependent upon port babl submitted in #16729 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 12:07:58 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 19:07:58 -0000 Subject: [MacPorts] #10858: BUG: sdcc-2.7 runtime errors on Mac Intel /w Xcode 2.3 & 2.4 In-Reply-To: <051.fec077c9a73df70fde67805f4ea1d349@macports.org> References: <051.fec077c9a73df70fde67805f4ea1d349@macports.org> Message-ID: <060.a1d06e2e129fa2a3cd627a6c71c63741@macports.org> #10858: BUG: sdcc-2.7 runtime errors on Mac Intel /w Xcode 2.3 & 2.4 ------------------------------+--------------------------------------------- Reporter: mdickens at nd.edu | Owner: yeled at macports.org Type: defect | Status: closed Priority: High | Milestone: Port Bugs Component: ports | Version: 1.3.2 Resolution: fixed | Keywords: sdcc, xcode Port: sdcc | ------------------------------+--------------------------------------------- Comment(by mlk at alum.mit.edu): In my testing, SDCC 2.8.0 does indeed resolve the issue. Thanks for keeping up with this. - MLD -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 12:22:02 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 19:22:02 -0000 Subject: [MacPorts] #16731: pspp 0.6.0 port submission Message-ID: <062.68fb1b8f5f8a2e302e5f05b5cc84516b@macports.org> #16731: pspp 0.6.0 port submission ----------------------------------------+----------------------------------- Reporter: jeremy at lavergne.gotdns.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: pspp portfile submission | Port: ----------------------------------------+----------------------------------- I've created the portfile and a patch for config.h.in for the pspp project. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 12:26:52 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 19:26:52 -0000 Subject: [MacPorts] #16732: Can't install mod_python25 Tiger XCode 2.4.1 Message-ID: <067.4a80d84dc379abd406059d2acc245a10@macports.org> #16732: Can't install mod_python25 Tiger XCode 2.4.1 ---------------------------------------------+------------------------------ Reporter: david.pennell at registerguard.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: mod_python,python25,Framework | Port: mod_python25 ---------------------------------------------+------------------------------ port install mod_python25 fails on this: /opt/local/share/apr-1/build/libtool --silent --mode=link /usr/bin/gcc-4.0 -o mod_python.la -rpath /opt/local/apache2/modules -module -avoid-version finfoobject.lo hlistobject.lo hlist.lo filterobject.lo connobject.lo serverobject.lo util.lo tableobject.lo requestobject.lo _apachemodule.lo mod_python.lo -L/opt/local/lib -Wl,-F/opt/local/Library/Frameworks -Wl,-framework,Python -u _PyMac_Error /Versions// -L/opt/local/lib -lm -framework Python -ldl /usr/bin/ld: can't locate framework for: -framework Python The Framework is there. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 13:18:49 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 20:18:49 -0000 Subject: [MacPorts] #16726: openssl fails to compile universal on Tiger PPC In-Reply-To: <059.1a2b8b44a918b71e4bb3100e22e9f8cb@macports.org> References: <059.1a2b8b44a918b71e4bb3100e22e9f8cb@macports.org> Message-ID: <068.d98c5a94171b0553bd0bc9a1b3969135@macports.org> #16726: openssl fails to compile universal on Tiger PPC --------------------------------------+------------------------------------- Reporter: gianluca.toso at gmail.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: openssl universal tiger ppc Port: openssl | --------------------------------------+------------------------------------- Comment(by jmr at macports.org): Should really use universal_sysroot instead of hardcoding the 10.4u SDK. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 13:20:28 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 20:20:28 -0000 Subject: [MacPorts] #16732: Can't install mod_python25 Tiger XCode 2.4.1 In-Reply-To: <067.4a80d84dc379abd406059d2acc245a10@macports.org> References: <067.4a80d84dc379abd406059d2acc245a10@macports.org> Message-ID: <076.89f5e4aa90d9bc7de275698462bb26b9@macports.org> #16732: Can't install mod_python25 Tiger XCode 2.4.1 ----------------------------------------------+----------------------------- Reporter: david.pennell at registerguard.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: mod_python,python25,Framework Port: mod_python25 | ----------------------------------------------+----------------------------- Changes (by jmr at macports.org): * cc: jwa at macports.org (added) * owner: macports-tickets at lists.macosforge.org => mww at macports.org Comment: Assigning to maintainers. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 14:13:14 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 21:13:14 -0000 Subject: [MacPorts] #16718: objc_encoding.m does not compile In-Reply-To: <055.21eb635915fa980a70fa841dac929a0d@macports.org> References: <055.21eb635915fa980a70fa841dac929a0d@macports.org> Message-ID: <064.a02cea4e6605d8395dee258fc23b6d0f@macports.org> #16718: objc_encoding.m does not compile ----------------------------------+----------------------------------------- Reporter: milosh at macports.org | Owner: toby at macports.org Type: defect | Status: closed Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: fixed | Keywords: Port: | ----------------------------------+----------------------------------------- Changes (by toby at macports.org): * status: new => closed * resolution: => fixed Comment: Added #include to objc_encoding.m and Pextlib.c in r40476 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 14:17:02 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 21:17:02 -0000 Subject: [MacPorts] #16589: DEFECT: ffmpeg -version fails to report correct svn revision In-Reply-To: <054.702dda5647a78ea51173cc1a7b929e07@macports.org> References: <054.702dda5647a78ea51173cc1a7b929e07@macports.org> Message-ID: <063.d0bf88564dc222f30c22c5300b6840ae@macports.org> #16589: DEFECT: ffmpeg -version fails to report correct svn revision ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: ffmpeg Port: ffmpeg | ---------------------------------+------------------------------------------ Comment(by macsforever2000 at macports.org): ryandesign at macports.org had this comment about the patch: "But this just forces the working copy to be discarded and checked out again every time you try to install. I thought the point of having a working copy was so that it could be reused. It would be nice if the working copy were only deleted in the pre-fetch phase if the revision number of the working copy (see the "svnversion" command) doesn't match the revision the port wants to check out." If you provide an updated patch, I will commit it. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 14:45:54 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 21:45:54 -0000 Subject: [MacPorts] #16732: Can't install mod_python25 Tiger XCode 2.4.1 In-Reply-To: <067.4a80d84dc379abd406059d2acc245a10@macports.org> References: <067.4a80d84dc379abd406059d2acc245a10@macports.org> Message-ID: <076.c75bdee66b2cf1bcc852a630a72f870e@macports.org> #16732: Can't install mod_python25 Tiger XCode 2.4.1 ----------------------------------------------+----------------------------- Reporter: david.pennell at registerguard.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: mod_python,python25,Framework Port: mod_python25 | ----------------------------------------------+----------------------------- Comment(by blb at macports.org): What version of python25 is installed (use {{{port installed python25}}}); also, do you have python_select installed, and used it to set python25 as the MacPorts default? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 15:29:51 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 22:29:51 -0000 Subject: [MacPorts] #16589: DEFECT: ffmpeg -version fails to report correct svn revision In-Reply-To: <054.702dda5647a78ea51173cc1a7b929e07@macports.org> References: <054.702dda5647a78ea51173cc1a7b929e07@macports.org> Message-ID: <063.e5387ff69befe9adb3338f72beb07c8c@macports.org> #16589: DEFECT: ffmpeg -version fails to report correct svn revision ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: ffmpeg Port: ffmpeg | ---------------------------------+------------------------------------------ Comment(by ryandesign at macports.org): Replying to [comment:3 macsforever2000@?]: > ryandesign at macports.org had this comment about the patch: "But this just forces the working copy to be discarded and checked out again every time you try to install. I thought the point of having a working copy was so that it could be reused. It would be nice if the working copy were only deleted in the pre-fetch phase if the revision number of the working copy (see the "svnversion" command) doesn't match the revision the port wants to check out." > > If you provide an updated patch, I will commit it. Thanks! Nevermind, please ignore me. I misread the patch. It's fine as it is. I see now that it only deletes the distpath directory if it is an export, not a working copy. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 16:16:31 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 23:16:31 -0000 Subject: [MacPorts] #16733: Tidy Update Request Message-ID: <058.e424009e48a57bb2349ae399959f0f2f@macports.org> #16733: Tidy Update Request ------------------------------------+--------------------------------------- Reporter: william.dinoia at mac.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: tidy update request | Port: tidy ------------------------------------+--------------------------------------- Requesting the tidy port be updated to a more current version. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 16:59:34 2008 From: noreply at macports.org (MacPorts) Date: Thu, 02 Oct 2008 23:59:34 -0000 Subject: [MacPorts] #16734: gtamacfonts 1.0 fetch during install fails with gtamacfonts.tar.bz2 not found Message-ID: <054.a5bde664f7fd2940fd57fe33e7e41e3e@macports.org> #16734: gtamacfonts 1.0 fetch during install fails with gtamacfonts.tar.bz2 not found ---------------------------------------+------------------------------------ Reporter: hgbrauen at velcom.ca | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gtamacfonts install fetch | Port: gtamacfonts ---------------------------------------+------------------------------------ command issued: sudo port install gtamacfonts ---> Fetching gtamacfonts ---> Attempting to fetch gtamacfonts.tar.bz2 from http://ftp.nluug.nl/comp/macosx/ ---> Attempting to fetch gtamacfonts.tar.bz2 from http://svn.macports.org/repository/macports/distfiles/gtamacfonts ---> Attempting to fetch gtamacfonts.tar.bz2 from http://svn.macports.org/repository/macports/distfiles/general/ ---> Attempting to fetch gtamacfonts.tar.bz2 from http://svn.macports.org/repository/macports/downloads/gtamacfonts Error: Target org.macports.fetch returned: fetch failed Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 18:31:07 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 01:31:07 -0000 Subject: [MacPorts] #16734: gtamacfonts 1.0 fetch during install fails with gtamacfonts.tar.bz2 not found In-Reply-To: <054.a5bde664f7fd2940fd57fe33e7e41e3e@macports.org> References: <054.a5bde664f7fd2940fd57fe33e7e41e3e@macports.org> Message-ID: <063.9a7f791d77cda86cf04ca10486f08a16@macports.org> #16734: gtamacfonts 1.0 fetch during install fails with gtamacfonts.tar.bz2 not found ---------------------------------+------------------------------------------ Reporter: hgbrauen at velcom.ca | Owner: tristan at cs.dartmouth.edu Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gtamacfonts install fetch Port: gtamacfonts | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => tristan at cs.dartmouth.edu Old description: > command issued: sudo port install gtamacfonts > > ---> Fetching gtamacfonts > ---> Attempting to fetch gtamacfonts.tar.bz2 from > http://ftp.nluug.nl/comp/macosx/ > ---> Attempting to fetch gtamacfonts.tar.bz2 from > http://svn.macports.org/repository/macports/distfiles/gtamacfonts > ---> Attempting to fetch gtamacfonts.tar.bz2 from > http://svn.macports.org/repository/macports/distfiles/general/ > ---> Attempting to fetch gtamacfonts.tar.bz2 from > http://svn.macports.org/repository/macports/downloads/gtamacfonts > Error: Target org.macports.fetch returned: fetch failed > Error: Status 1 encountered during processing. New description: command issued: sudo port install gtamacfonts {{{ ---> Fetching gtamacfonts ---> Attempting to fetch gtamacfonts.tar.bz2 from http://ftp.nluug.nl/comp/macosx/ ---> Attempting to fetch gtamacfonts.tar.bz2 from http://svn.macports.org/repository/macports/distfiles/gtamacfonts ---> Attempting to fetch gtamacfonts.tar.bz2 from http://svn.macports.org/repository/macports/distfiles/general/ ---> Attempting to fetch gtamacfonts.tar.bz2 from http://svn.macports.org/repository/macports/downloads/gtamacfonts Error: Target org.macports.fetch returned: fetch failed Error: Status 1 encountered during processing. }}} -- Comment: I see the same issue. Please remember to use WikiFormatting. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 20:06:27 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 03:06:27 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 Message-ID: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------------+------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Keywords: image processing graphics | Port: gimp2 ---------------------------------------+------------------------------------ Assume maintainership for gimp2 which is currently nomaintainer and upgrade to the newly released stable version 2.6.0. Note that this port depends on new ports babl (#16729) and gegl (#16730) which have not yet been committed. Tested successfully on 10.4.11 ppc. Would appreciate testing and feedback on other platforms. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 20:14:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 03:14:43 -0000 Subject: [MacPorts] #16736: python26-2.6 distfile has changed Message-ID: <052.e0f724b9b4aaf66e503927b36254f67f@macports.org> #16736: python26-2.6 distfile has changed ------------------------------+--------------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: python26 ------------------------------+--------------------------------------------- FYI, apparently they [http://mail.python.org/pipermail/python-announce- list/2008-October/006935.html recut the distfiles] for 2.6 to remove excess stuff, so the checksums now fail. The correct ones are: {{{ checksums md5 d16d29a77db2cd3af882a591f431a403 \ sha1 d7fd08304b66cb4020786a7ee5aa452235046ecd \ rmd160 b44d5cc7efa198b21f41e43e1d28af60875f0a4e }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 20:28:47 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 03:28:47 -0000 Subject: [MacPorts] #16733: Tidy Update Request In-Reply-To: <058.e424009e48a57bb2349ae399959f0f2f@macports.org> References: <058.e424009e48a57bb2349ae399959f0f2f@macports.org> Message-ID: <067.6e1fe7255aa197058bf6b6cdc72814f1@macports.org> #16733: Tidy Update Request -------------------------------------+-------------------------------------- Reporter: william.dinoia at mac.com | Owner: ryandesign at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: tidy update request Port: tidy | -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => ryandesign at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 20:45:54 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 03:45:54 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.3b02f7ee5aaf484ac97ed7b47cf322da@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): you should disable Gvfs as noted on gimp site Quote "If you build GIMP yourself and don't have GVfs support on your platform you need to explicitly pass --without-gvfs to configure, otherwise opening remote files will not work properly" -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 21:06:33 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 04:06:33 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.1221d84d6c1d0109be2686bbb7c3cde8@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): if ffmpeg dependency a must or optional? considering this port is required for gimp 2.6 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 21:19:26 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 04:19:26 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.5dfc69fe9d554c6b4e39cdbb3e6158cd@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:1 myschizobuddy@?]: > you should disable Gvfs as noted on gimp site > Quote "If you build GIMP yourself and don't have GVfs support on your platform you need to explicitly pass --without-gvfs to configure, otherwise opening remote files will not work properly" Well, we do have a port of gvfs available in Macports so I guess the question is what level of support is available for various remote protocols. Will look into this. Thanks for the input. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 21:41:33 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 04:41:33 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.70d84c7e54b721d5a140efb4155dbacd@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:2 myschizobuddy@?]: > if ffmpeg dependency a must or optional? > considering this port is required for gimp 2.6 gegl considers it to be optional -- it will build without it at reduced functionality. Specifically it is using avcodec and avformat. However there is no way to turn this functionality off if it is not wanted in this port without removing ffmpeg as a port. If it is available they use it. This is not an unusual developer philosophy (inkscape is another example), but it makes for a port that behaves unpredicably depending on what the user may or may not have installed and the variants capability in Macports is no help. Removing the dependency conditionally, based on a variant, for instance, says nothing about whether the port is installed or not. So by making a dependency on ffmpeg at least there is consistency in how the port behaves and it seems to be in line with the developers' philosophy of if you have it, use it. On the other hand both ffmpeg and gimp2 are pretty big builds. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 22:06:39 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 05:06:39 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure Message-ID: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> #16737: gnucash 2.2.7 build faliure ------------------------------+--------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gnucash. Leopard | Port: gnucash ------------------------------+--------------------------------------------- MacBook Pro Intel. Mac OS X Leopard 10.5.5. Xcode tools 3.1.1 build 2517. Macports 1.6.0. miranda:~ ben$ sudo port clean gnucash Password: ---> Cleaning gnucash miranda:~ ben$ sudo port install gnucash {{{---> Configuring aqbanking3 Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_aqbanking3/work/aqbanking-3.7.2" && ./configure --prefix=/opt/local --with-qt-dir=/opt/local/lib/qt3 --disable-dependency-tracking --with-frontends="cbanking g2banking qbanking" --with-backends="aqhbci aqofxconnect aqnone" --enable-libofx --disable-chipcard-client --disable-chipcard-client-test " returned error 1 Command output: checking for memset... yes checking for strcasecmp... yes checking for strdup... yes checking for strerror... yes checking for snprintf... yes checking for setlocale... yes checking if gwenhywfar support desired... yes checking for gwenhywfar... /opt/local checking for gwen libs... -L/opt/local/lib -lgwenhywfar checking for gwen includes... -I/opt/local/include checking for gwen binary tools... Usage: /opt/local/bin/gwenhywfar-config --includes gives you the include flags /opt/local/bin/gwenhywfar-config --libraries gives you the library flags /opt/local/bin/gwenhywfar-config --libraries++ gives you the library flags for GwenPP /opt/local/bin/gwenhywfar-config --libraries-ui returns the library flags for GwenUI /opt/local/bin/gwenhywfar-config --headers gives you the location of the header files /opt/local/bin/gwenhywfar-config --vmajor gives the major version of LibGwenhywfar /opt/local/bin/gwenhywfar-config --vminor gives the minor version of LibGwenhywfar /opt/local/bin/gwenhywfar-config --vpatchlevel gives the patchlevel of LibGwenhywfar /opt/local/bin/gwenhywfar-config --vbuild gives the build number of LibGwenhywfar /opt/local/bin/gwenhywfar-config --vtag gives the tag of LibGwenhywfar (cvs, beta or stable) /opt/local/bin/gwenhywfar-config --vstring returns a version string /opt/local/bin/gwenhywfar-config --has-crypt returns "yes" or "no" depending on whether there is cryto support compiled into Gwen checking for gwen plugins... /opt/local/lib/gwenhywfar/plugins/38 checking for gwen headers... /opt/local/include/gwenhywfar checking if gwenhywfar test desired... yes checking for Gwenhywfar version >=3.4.0.0... found 2.5.3.0 configure: error: Your Gwenhywfar version is way too old. Please update from http://sf.net/projects/gwenhywfar Error: The following dependencies failed to build: aqbanking3 evince libgnomeui nautilus eel gnome-desktop gnome-themes gtk-engines2 gvfs libsoup py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-nose py25-setuptools py25-zlib py25-orbit startup-notification gnome-menus librsvg libcroco libgsf bzip2 libexif poppler poppler-data goffice guile16 libgnomeprintui libgnomeprint bison libgnomecups libgtkhtml3 enchant p5 -finance-quote p5-crypt-ssleay p5-libwww-perl p5-compress-zlib p5 -compress-raw-zlib p5-io-compress-base p5-io-compress-zlib p5-html-parser p5-html-tagset p5-uri p5-datemanip p5-html-tableextract slib slib-guile16 Error: Status 1 encountered during processing.}}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 2 22:14:38 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 05:14:38 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.3bdd360a061aa45c7069790e55f955df@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:2 db.evans@?]: > Replying to [comment:1 myschizobuddy@?]: > > you should disable Gvfs as noted on gimp site > > Quote "If you build GIMP yourself and don't have GVfs support on your platform you need to explicitly pass --without-gvfs to configure, otherwise opening remote files will not work properly" > > Well, we do have a port of gvfs available in Macports so I guess the question is what level of support is available for various remote > protocols. Will look into this. Thanks for the input. Have attached a modified port file. Default is --without-gvsf (and --without-hal and --without-alsa to be complete) with a gvfs variant to include gvfs if desired by the adventurous. Thanks again for the input. Glad to see someone is paying attention. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 00:44:59 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 07:44:59 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.f1a6a25be40f7d9f47fc0495e9bd1bd0@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Old description: > MacBook Pro Intel. Mac OS X Leopard 10.5.5. Xcode tools 3.1.1 build 2517. > Macports 1.6.0. > > miranda:~ ben$ sudo port clean gnucash > Password: > ---> Cleaning gnucash > miranda:~ ben$ sudo port install gnucash > {{{---> Configuring aqbanking3 > Error: Target org.macports.configure returned: configure failure: shell > command " cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_aqbanking3/work/aqbanking-3.7.2" > && ./configure --prefix=/opt/local --with-qt-dir=/opt/local/lib/qt3 > --disable-dependency-tracking --with-frontends="cbanking g2banking > qbanking" --with-backends="aqhbci aqofxconnect aqnone" --enable-libofx > --disable-chipcard-client --disable-chipcard-client-test " returned error > 1 > Command output: checking for memset... yes > checking for strcasecmp... yes > checking for strdup... yes > checking for strerror... yes > checking for snprintf... yes > checking for setlocale... yes > checking if gwenhywfar support desired... yes > checking for gwenhywfar... /opt/local > checking for gwen libs... -L/opt/local/lib -lgwenhywfar > checking for gwen includes... -I/opt/local/include > checking for gwen binary tools... Usage: > /opt/local/bin/gwenhywfar-config --includes gives you the include flags > /opt/local/bin/gwenhywfar-config --libraries gives you the library flags > /opt/local/bin/gwenhywfar-config --libraries++ gives you the library > flags for GwenPP > /opt/local/bin/gwenhywfar-config --libraries-ui returns the library flags > for GwenUI > /opt/local/bin/gwenhywfar-config --headers gives you the location of the > header files > /opt/local/bin/gwenhywfar-config --vmajor gives the major version of > LibGwenhywfar > /opt/local/bin/gwenhywfar-config --vminor gives the minor version of > LibGwenhywfar > /opt/local/bin/gwenhywfar-config --vpatchlevel gives the patchlevel of > LibGwenhywfar > /opt/local/bin/gwenhywfar-config --vbuild gives the build number of > LibGwenhywfar > /opt/local/bin/gwenhywfar-config --vtag gives the tag of LibGwenhywfar > (cvs, beta or stable) > /opt/local/bin/gwenhywfar-config --vstring returns a version string > /opt/local/bin/gwenhywfar-config --has-crypt returns "yes" or "no" > depending on whether > there is cryto support compiled into Gwen > checking for gwen plugins... /opt/local/lib/gwenhywfar/plugins/38 > checking for gwen headers... /opt/local/include/gwenhywfar > checking if gwenhywfar test desired... yes > checking for Gwenhywfar version >=3.4.0.0... found 2.5.3.0 > configure: error: Your Gwenhywfar version is way too old. > Please update from http://sf.net/projects/gwenhywfar > > Error: The following dependencies failed to build: aqbanking3 evince > libgnomeui nautilus eel gnome-desktop gnome-themes gtk-engines2 gvfs > libsoup py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-nose > py25-setuptools py25-zlib py25-orbit startup-notification gnome-menus > librsvg libcroco libgsf bzip2 libexif poppler poppler-data goffice > guile16 libgnomeprintui libgnomeprint bison libgnomecups libgtkhtml3 > enchant p5-finance-quote p5-crypt-ssleay p5-libwww-perl p5-compress-zlib > p5-compress-raw-zlib p5-io-compress-base p5-io-compress-zlib p5-html- > parser p5-html-tagset p5-uri p5-datemanip p5-html-tableextract slib slib- > guile16 > Error: Status 1 encountered during processing.}}} New description: MacBook Pro Intel. Mac OS X Leopard 10.5.5. Xcode tools 3.1.1 build 2517. Macports 1.6.0. {{{ miranda:~ ben$ sudo port clean gnucash Password: ---> Cleaning gnucash miranda:~ ben$ sudo port install gnucash ---> Configuring aqbanking3 Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_aqbanking3/work/aqbanking-3.7.2" && ./configure --prefix=/opt/local --with-qt-dir=/opt/local/lib/qt3 --disable-dependency-tracking --with-frontends="cbanking g2banking qbanking" --with-backends="aqhbci aqofxconnect aqnone" --enable-libofx --disable-chipcard-client --disable-chipcard-client-test " returned error 1 Command output: checking for memset... yes checking for strcasecmp... yes checking for strdup... yes checking for strerror... yes checking for snprintf... yes checking for setlocale... yes checking if gwenhywfar support desired... yes checking for gwenhywfar... /opt/local checking for gwen libs... -L/opt/local/lib -lgwenhywfar checking for gwen includes... -I/opt/local/include checking for gwen binary tools... Usage: /opt/local/bin/gwenhywfar-config --includes gives you the include flags /opt/local/bin/gwenhywfar-config --libraries gives you the library flags /opt/local/bin/gwenhywfar-config --libraries++ gives you the library flags for GwenPP /opt/local/bin/gwenhywfar-config --libraries-ui returns the library flags for GwenUI /opt/local/bin/gwenhywfar-config --headers gives you the location of the header files /opt/local/bin/gwenhywfar-config --vmajor gives the major version of LibGwenhywfar /opt/local/bin/gwenhywfar-config --vminor gives the minor version of LibGwenhywfar /opt/local/bin/gwenhywfar-config --vpatchlevel gives the patchlevel of LibGwenhywfar /opt/local/bin/gwenhywfar-config --vbuild gives the build number of LibGwenhywfar /opt/local/bin/gwenhywfar-config --vtag gives the tag of LibGwenhywfar (cvs, beta or stable) /opt/local/bin/gwenhywfar-config --vstring returns a version string /opt/local/bin/gwenhywfar-config --has-crypt returns "yes" or "no" depending on whether there is cryto support compiled into Gwen checking for gwen plugins... /opt/local/lib/gwenhywfar/plugins/38 checking for gwen headers... /opt/local/include/gwenhywfar checking if gwenhywfar test desired... yes checking for Gwenhywfar version >=3.4.0.0... found 2.5.3.0 configure: error: Your Gwenhywfar version is way too old. Please update from http://sf.net/projects/gwenhywfar Error: The following dependencies failed to build: aqbanking3 evince libgnomeui nautilus eel gnome-desktop gnome-themes gtk-engines2 gvfs libsoup py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-nose py25-setuptools py25-zlib py25-orbit startup-notification gnome-menus librsvg libcroco libgsf bzip2 libexif poppler poppler-data goffice guile16 libgnomeprintui libgnomeprint bison libgnomecups libgtkhtml3 enchant p5 -finance-quote p5-crypt-ssleay p5-libwww-perl p5-compress-zlib p5 -compress-raw-zlib p5-io-compress-base p5-io-compress-zlib p5-html-parser p5-html-tagset p5-uri p5-datemanip p5-html-tableextract slib slib-guile16 Error: Status 1 encountered during processing. }}} -- Comment(by jmr at macports.org): I don't know how aqbanking3 is managing to skip installing its gwenhywfar3 dependency, but try installing gwenhywfar3 manually first. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 00:49:21 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 07:49:21 -0000 Subject: [MacPorts] #16733: Tidy Update Request In-Reply-To: <058.e424009e48a57bb2349ae399959f0f2f@macports.org> References: <058.e424009e48a57bb2349ae399959f0f2f@macports.org> Message-ID: <067.852cae53e130d15804b86e2a6f8283a1@macports.org> #16733: Tidy Update Request -------------------------------------+-------------------------------------- Reporter: william.dinoia at mac.com | Owner: ryandesign at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: tidy update request Port: tidy | -------------------------------------+-------------------------------------- Changes (by ryandesign at macports.org): * status: new => assigned Comment: They aren't releasing distfiles anymore; we'll have to switch to pulling the source from CVS. Since this will pull in many years worth of updates, we should be careful to test tidy's dependents for any breakage with the new version. Currently that would be php5/php5-devel, bluefish, py-utidylib/py25-utidylib and py25-mx-experimental. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 01:23:47 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 08:23:47 -0000 Subject: [MacPorts] #16738: transmission-x11 1.34 : new release Message-ID: <054.f5ea28bbae428f938dec1c6361ea0256@macports.org> #16738: transmission-x11 1.34 : new release --------------------------------+------------------------------------------- Reporter: neric27 at wanadoo.fr | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: transmission-x11 --------------------------------+------------------------------------------- transmission 1.34 is available. Attached an updated Portfile. transmission used to be split between 2 ports : - transmission : build the aqua version - transmission-x11: build the command-line and gtk version Why not merge them and use variants instead ? NOTE : The aqua front-end (port transmission) doesn't build on OS X Tiger (requires XCode 3), so I can't test it, but I can provide a tentative Portfile. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 01:27:00 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 08:27:00 -0000 Subject: [MacPorts] #16738: transmission-x11 1.34 : new release In-Reply-To: <054.f5ea28bbae428f938dec1c6361ea0256@macports.org> References: <054.f5ea28bbae428f938dec1c6361ea0256@macports.org> Message-ID: <063.7f116a55a2ced5b759df56beff0ef5a4@macports.org> #16738: transmission-x11 1.34 : new release ---------------------------------+------------------------------------------ Reporter: neric27 at wanadoo.fr | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: transmission-x11 | ---------------------------------+------------------------------------------ Comment(by neric27 at wanadoo.fr): Maybe I should make the gtk variant default... -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 03:06:09 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 10:06:09 -0000 Subject: [MacPorts] #16736: python26-2.6 distfile has changed In-Reply-To: <052.e0f724b9b4aaf66e503927b36254f67f@macports.org> References: <052.e0f724b9b4aaf66e503927b36254f67f@macports.org> Message-ID: <061.a44f5fdca4aee58e6ba1a5f93c3dffa3@macports.org> #16736: python26-2.6 distfile has changed -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: python26 | -------------------------------+-------------------------------------------- Changes (by afb at macports.org): * status: new => closed * resolution: => fixed Comment: Fixed, r40480. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 03:26:37 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 10:26:37 -0000 Subject: [MacPorts] #16739: www/litmus 0.12 Message-ID: <055.ccce9ba4584c2d4425ade44b44a35055@macports.org> #16739: www/litmus 0.12 -------------------------------------------+-------------------------------- Reporter: alej.chow at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: litmus, neon, cadaver, webdav | Port: litmus -------------------------------------------+-------------------------------- Updated to support litmus 0.12, released 29 September 2008. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 04:49:25 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 11:49:25 -0000 Subject: [MacPorts] #16740: base multiple versions of port active; deactivate and uninstall fail thereafter Message-ID: <057.02f5bdf79d3b27f5dcff97a065913b8f@macports.org> #16740: base multiple versions of port active; deactivate and uninstall fail thereafter -----------------------------------+---------------------------------------- Reporter: febeling at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: base | Version: 1.7.0 Keywords: | Port: -----------------------------------+---------------------------------------- Under certain conditions it is possible to get multiple versions of the same port be active. I this situatiuon it is no longer possible to deactivate or uninstall, even when specifiying the full name @version_rev string. Please note that the port in question uses the unusual version number 0.0. {{{ DEBUG: Executing org.macports.activate (mochiweb) ---> Activating mochiweb @0.0_2 Error: Target org.macports.activate returned: Image error: Another version of this port (mochiweb @0.0_0) is already active. Warning: the following items did not execute (for mochiweb): org.macports.activate Error: Status 1 encountered during processing. flomac:mochiweb febeling$ port installed mochiweb The following ports are currently installed: mochiweb @0.0_0 (active) mochiweb @0.0_1 (active) mochiweb @0.0_2 (active) flomac:mochiweb febeling$ sudo port -f uninstall mochiweb mochiweb @0.0_0 ---> The following versions of mochiweb are currently installed: ---> mochiweb @0.0_0 (active) ---> mochiweb @0.0_1 (active) ---> mochiweb @0.0_2 (active) Error: port uninstall failed: Registry error: Please specify the full version as recorded in the port registry. flomac:mochiweb febeling$ port installed ruby The following ports are currently installed: ruby @1.8.6-p111_0+darwin_9+dtrace+thread_hooks ruby @1.8.7-p22_2+thread_hooks ruby @1.8.7-p22_3+thread_hooks (active) flomac:mochiweb febeling$ sudo port -f uninstall mochiweb @0.0_0 Error: port uninstall failed: Registry error: Please specify the name of the port. flomac:mochiweb febeling$ sudo port -f uninstall mochiweb ---> The following versions of mochiweb are currently installed: ---> mochiweb @0.0_0 (active) ---> mochiweb @0.0_1 (active) ---> mochiweb @0.0_2 (active) Error: port uninstall failed: Registry error: Please specify the full version as recorded in the port registry. }}} (Running trunk on 10.5.5 Intel) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 05:04:09 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 12:04:09 -0000 Subject: [MacPorts] #16339: emacs-app now in official emacs cvs (was: emacs-app update) In-Reply-To: <054.9b0e42185aae0f53f1a1f50ef31ae496@macports.org> References: <054.9b0e42185aae0f53f1a1f50ef31ae496@macports.org> Message-ID: <063.c9e20339a86d5a97dffecc559f3b9543@macports.org> #16339: emacs-app now in official emacs cvs ---------------------------------+------------------------------------------ Reporter: mmoll at macports.org | Owner: css at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: emacs, devel Port: | ---------------------------------+------------------------------------------ Changes (by css at macports.org): * cc: gwhitney at pobox.com (added) * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 05:26:44 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 12:26:44 -0000 Subject: [MacPorts] #14421: doxygen-1.5.7: consider no_tex (or lite?) variant In-Reply-To: <052.74d7674c25553a2d329a95d572ae457f@macports.org> References: <052.74d7674c25553a2d329a95d572ae457f@macports.org> Message-ID: <061.34a08d07a882dc5ce1e6c9dded1ea7b0@macports.org> #14421: doxygen-1.5.7: consider no_tex (or lite?) variant -------------------------------+-------------------------------------------- Reporter: css at macports.org | Owner: css at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: doxygen | -------------------------------+-------------------------------------------- Comment(by css at macports.org): I went ahead and committed this to r40482, as it really does make doxygen a faster install. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 06:42:44 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 13:42:44 -0000 Subject: [MacPorts] #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp-parser.c In-Reply-To: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> References: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> Message-ID: <069.6950b808447884ac00bb5e39c6b80016@macports.org> #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp- parser.c ---------------------------------------+------------------------------------ Reporter: pgijnxn02 at sneakemail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: build, typo Port: gnucash | ---------------------------------------+------------------------------------ Comment(by pgijnxn02 at sneakemail.com): Great, thanks! Unfortunately I can't test this at the moment because it's not building for other reasons: the dependency gnome-desktop [http://bugzilla.gnome.org/show_bug.cgi?id=554263 needs xrandr 1.2], which I don't seem to have, so it doesn't build. ...unless you know of a way to update my version of xrandr? I have Tiger 10.4.11 on PPC. But we're getting a bit off-topic now, aren't we? :) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 07:27:38 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 14:27:38 -0000 Subject: [MacPorts] #16741: py25-setuptools error during deluge install Message-ID: <058.e58f597f8a43da9eb982d09a3b4b0e33@macports.org> #16741: py25-setuptools error during deluge install ------------------------------------------+--------------------------------- Reporter: ltmayonnaise at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: deluge py25-setuptools error | Port: py25-setuptools ------------------------------------------+--------------------------------- What a pain getting deluge running, one problem after another getting the dependencies installed and I finally hit a brick wall with py25-setuptools. I've got a Macbook G4 with 10.4.11 installed, Xcode 2.5, Macports 1.6 and Python 2.5.2_5 are also installed. I've tried cleaning python25, py25-setuptools and deluge before installing the ports, all to no avail. Also, I have used python_select to select python25 so that's not the problem. Here's the error I'm getting: {{{ ---> Fetching py25-setuptools ---> Verifying checksum(s) for py25-setuptools ---> Extracting py25-setuptools ---> Applying patches to py25-setuptools ---> Configuring py25-setuptools ---> Building py25-setuptools with target build ---> Staging py25-setuptools into destroot Error: Target org.macports.destroot returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/setuptools-0.6c8" && /opt/local/bin/python2.5 setup.py install --prefix=/opt/local --root=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot " returned error 139 Command output: byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/install_egg_info.py to install_egg_info.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/install_lib.py to install_lib.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/install_scripts.py to install_scripts.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/register.py to register.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/rotate.py to rotate.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/saveopts.py to saveopts.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/sdist.py to sdist.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/setopt.py to setopt.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/test.py to test.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/command/upload.py to upload.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/depends.py to depends.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/dist.py to dist.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/extension.py to extension.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/package_index.py to package_index.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/sandbox.py to sandbox.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/tests/__init__.py to __init__.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/tests/doctest.py to doctest.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/tests/test_packageindex.py to test_packageindex.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools/tests/test_resources.py to test_resources.pyc byte-compiling /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/site.py to site.pyc running install_egg_info running egg_info writing setuptools.egg-info/PKG-INFO writing top-level names to setuptools.egg-info/top_level.txt writing dependency_links to setuptools.egg-info/dependency_links.txt writing entry points to setuptools.egg-info/entry_points.txt reading manifest file 'setuptools.egg-info/SOURCES.txt' writing manifest file 'setuptools.egg-info/SOURCES.txt' Copying setuptools.egg-info to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-setuptools/work/destroot/opt/local/lib/python2.5 /site-packages/setuptools-0.6c8-py2.5.egg-info running install_scripts Error: The following dependencies failed to build: py25-gtk py25-cairo py25-numpy py25-nose py25-setuptools py25-xdg Error: Status 1 encountered during processing. }}} Thanks a ton to anyone who can lend a hand! Nathan -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 07:43:00 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 14:43:00 -0000 Subject: [MacPorts] #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp-parser.c In-Reply-To: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> References: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> Message-ID: <069.28b9bbe55679bebaee3335a21a1a7be8@macports.org> #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp- parser.c ---------------------------------------+------------------------------------ Reporter: pgijnxn02 at sneakemail.com | Owner: macsforever2000 at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: build, typo Port: gnucash | ---------------------------------------+------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 07:44:13 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 14:44:13 -0000 Subject: [MacPorts] #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp-parser.c In-Reply-To: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> References: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> Message-ID: <069.88775cede631f121823779df2129c0e3@macports.org> #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp- parser.c ---------------------------------------+------------------------------------ Reporter: pgijnxn02 at sneakemail.com | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: build, typo Port: gnucash | ---------------------------------------+------------------------------------ Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40485. Strangely it always worked for me without the patch, but adding this patch does not hurt anything for me. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 07:49:35 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 14:49:35 -0000 Subject: [MacPorts] #16739: www/litmus 0.12 In-Reply-To: <055.ccce9ba4584c2d4425ade44b44a35055@macports.org> References: <055.ccce9ba4584c2d4425ade44b44a35055@macports.org> Message-ID: <064.a7974c7d184bc59293394d0b7393d4d2@macports.org> #16739: www/litmus 0.12 ----------------------------------+----------------------------------------- Reporter: alej.chow at gmail.com | Owner: arto.bendiken at gmail.com Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: litmus, neon, cadaver, webdav Port: litmus | ----------------------------------+----------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => arto.bendiken at gmail.com Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 07:51:35 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 14:51:35 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.a3c38cab8e9113ad5eeeac8fc272afab@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by macsforever2000 at macports.org): You might also need to uninstall aqbanking and gwenhywfar. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 08:09:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 15:09:43 -0000 Subject: [MacPorts] #16720: gnome-desktop 2.24.0 build failure In-Reply-To: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> References: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> Message-ID: <064.1a59d4407481a4bfb6e4cdd53d35db8c@macports.org> #16720: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gnome-desktop | ----------------------------------+----------------------------------------- Comment(by kschombu at cisco.com): I am experiencing the same problem and I have libXrandr 2.1.0 installed. When I try to compile gnome-rr.c using the command in the original post I get exact same errors. However, when installing gnome-desktop via the port command I get a different set of errors: > sudo port instal gnome-desktop ---> Fetching gnome-desktop ---> Verifying checksum(s) for gnome-desktop ---> Extracting gnome-desktop ---> Configuring gnome-desktop ---> Building gnome-desktop with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_gnome_gnome-desktop/work/gnome-desktop-2.24.0" && make all " returned error 2 Command output: gnome-rr.c:1111: error: dereferencing pointer to incomplete type gnome-rr.c: At top level: gnome-rr.c:1117: error: syntax error before 'RRMode' gnome-rr.c:1118: warning: 'mode_new' was used with no prototype before its definition gnome-rr.c: In function 'mode_new': gnome-rr.c:1119: error: invalid application of 'sizeof' to incomplete type 'GnomeRRMode' gnome-rr.c:1121: error: dereferencing pointer to incomplete type gnome-rr.c:1121: error: 'id' undeclared (first use in this function) gnome-rr.c:1122: error: dereferencing pointer to incomplete type gnome-rr.c:1122: error: 'info' undeclared (first use in this function) gnome-rr.c: In function 'gnome_rr_mode_get_id': gnome-rr.c:1131: error: dereferencing pointer to incomplete type gnome-rr.c: In function 'gnome_rr_mode_get_width': gnome-rr.c:1138: error: dereferencing pointer to incomplete type gnome-rr.c: In function 'gnome_rr_mode_get_freq': gnome-rr.c:1145: error: dereferencing pointer to incomplete type gnome-rr.c: In function 'gnome_rr_mode_get_height': gnome-rr.c:1152: error: dereferencing pointer to incomplete type gnome-rr.c: At top level: gnome-rr.c:1156: error: syntax error before 'XRRModeInfo' gnome-rr.c:1157: warning: 'mode_initialize' was used with no prototype before its definition gnome-rr.c: In function 'mode_initialize': gnome-rr.c:1158: error: 'mode' undeclared (first use in this function) gnome-rr.c:1159: error: 'info' undeclared (first use in this function) gnome-rr.c: In function 'mode_free': gnome-rr.c:1170: error: dereferencing pointer to incomplete type make[3]: *** [gnome-rr.lo] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 08:17:55 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 15:17:55 -0000 Subject: [MacPorts] #16720: gnome-desktop 2.24.0 build failure In-Reply-To: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> References: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> Message-ID: <064.521c2337841cc3eefefad87db5ed10f7@macports.org> #16720: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gnome-desktop | ----------------------------------+----------------------------------------- Comment(by kschombu at cisco.com): Sorry about the formatting in the previous post. Here it as again in a readable format: sudo port instal gnome-desktop[[BR]] ---> Fetching gnome-desktop[[BR]] ---> Verifying checksum(s) for gnome-desktop[[BR]] ---> Extracting gnome-desktop[[BR]] ---> Configuring gnome-desktop[[BR]] ---> Building gnome-desktop with target all[[BR]] Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_gnome_gnome-desktop/work/gnome-desktop-2.24.0" && make all " returned error 2[[BR]] Command output: gnome-rr.c:1111: error: dereferencing pointer to incomplete type[[BR]] gnome-rr.c: At top level:[[BR]] gnome-rr.c:1117: error: syntax error before 'RRMode'[[BR]] gnome-rr.c:1118: warning: 'mode_new' was used with no prototype before its definition[[BR]] gnome-rr.c: In function 'mode_new':[[BR]] gnome-rr.c:1119: error: invalid application of 'sizeof' to incomplete type 'GnomeRRMode'[[BR]] gnome-rr.c:1121: error: dereferencing pointer to incomplete type[[BR]] gnome-rr.c:1121: error: 'id' undeclared (first use in this function)[[BR]] gnome-rr.c:1122: error: dereferencing pointer to incomplete type[[BR]] gnome-rr.c:1122: error: 'info' undeclared (first use in this function)[[BR]] gnome-rr.c: In function 'gnome_rr_mode_get_id':[[BR]] gnome-rr.c:1131: error: dereferencing pointer to incomplete type[[BR]] gnome-rr.c: In function 'gnome_rr_mode_get_width':[[BR]] gnome-rr.c:1138: error: dereferencing pointer to incomplete type[[BR]] gnome-rr.c: In function 'gnome_rr_mode_get_freq':[[BR]] gnome-rr.c:1145: error: dereferencing pointer to incomplete type[[BR]] gnome-rr.c: In function 'gnome_rr_mode_get_height':[[BR]] gnome-rr.c:1152: error: dereferencing pointer to incomplete type[[BR]] gnome-rr.c: At top level:[[BR]] gnome-rr.c:1156: error: syntax error before 'XRRModeInfo'[[BR]] gnome-rr.c:1157: warning: 'mode_initialize' was used with no prototype before its definition[[BR]] gnome-rr.c: In function 'mode_initialize':[[BR]] gnome-rr.c:1158: error: 'mode' undeclared (first use in this function)[[BR]] gnome-rr.c:1159: error: 'info' undeclared (first use in this function)[[BR]] gnome-rr.c: In function 'mode_free':[[BR]] gnome-rr.c:1170: error: dereferencing pointer to incomplete type[[BR]] make[3]: *** [gnome-rr.lo] Error 1[[BR]] make[2]: *** [all-recursive] Error 1[[BR]] make[1]: *** [all-recursive] Error 1[[BR]] make: *** [all] Error 2[[BR]] -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 10:29:17 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 17:29:17 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.e339a80c706aa45f733ea3f48025f205@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by macsforever2000 at macports.org): I have merged aqbanking3 and gwenhywfar3 into aqbanking and gwenhywfar respectively. Here's the cheat sheet to get gnucash installed: {{{ sudo port selfupdate sudo port -pf uninstall gnucash aqbanking aqbanking3 gwenhywfar gwenhywfar3 sudo port install gnucash }}} The above should be run even if you currently have gnucash installed to handle updates going forward. Sorry for the confusion on all this! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 11:48:57 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 18:48:57 -0000 Subject: [MacPorts] #16742: The master site for xtail has changed Message-ID: <058.a0f3702dccd29b00b4eba3f3241c3fe7@macports.org> #16742: The master site for xtail has changed ------------------------------------+--------------------------------------- Reporter: kmayer at bitwrangler.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ------------------------------------+--------------------------------------- file: {{{ /trunk/dports/sysutils/xtail/Portfile }}} was: {{{ master_sites http://www.unicom.com/sw/xtail/ }}} now {{{ master_sites http://www.unicom.com/files/ }}} The md5 checksum has not changed: {{{ kmayer at KenMayer$ curl -O http://www.unicom.com/files/xtail-2.1.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 26769 100 26769 0 0 43162 0 --:--:-- --:--:-- --:--:-- 71806 kmayer at KenMayer$ md5 xtail-2.1.tar.gz MD5 (xtail-2.1.tar.gz) = 2e4717c591a2cbbd4aeb63d00c87a0cb }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 12:20:24 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 19:20:24 -0000 Subject: [MacPorts] #16742: The master site for xtail has changed In-Reply-To: <058.a0f3702dccd29b00b4eba3f3241c3fe7@macports.org> References: <058.a0f3702dccd29b00b4eba3f3241c3fe7@macports.org> Message-ID: <067.7a050426013a8ed57610dd0e0c2529c7@macports.org> #16742: The master site for xtail has changed -------------------------------------+-------------------------------------- Reporter: kmayer at bitwrangler.com | Owner: macsforever2000 at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 12:20:45 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 19:20:45 -0000 Subject: [MacPorts] #16742: The master site for xtail has changed In-Reply-To: <058.a0f3702dccd29b00b4eba3f3241c3fe7@macports.org> References: <058.a0f3702dccd29b00b4eba3f3241c3fe7@macports.org> Message-ID: <067.8d8a41ffd63d24927a3f2e5b42581c72@macports.org> #16742: The master site for xtail has changed -------------------------------------+-------------------------------------- Reporter: kmayer at bitwrangler.com | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: xtail | -------------------------------------+-------------------------------------- Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed * port: => xtail Comment: Committed revision r40494. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 12:27:19 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 19:27:19 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.1cc2950def12a2a5a3168196a7f5a197@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by macsforever2000 at macports.org): What will happen in the case of py-ctypes which is built into Python 2.5+? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 12:42:44 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 19:42:44 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.fcfa3306ceee13e25ba1da4c7f1a02bd@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): Shouldn't we have enable static for both gegl and babl, to get the respective static libraries -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 12:49:19 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 19:49:19 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.360bc198c26e3536c5eb41c067f0b17c@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:4 myschizobuddy@?]: > Shouldn't we have enable static for both gegl and babl, to get the respective static libraries I used the default settings for configure. Most programs link to dynamic libraries these days and if you use the static libraries then you will have to re-build your application whenever the library is updated to get the benefit. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 12:57:59 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 19:57:59 -0000 Subject: [MacPorts] #16743: Can't build xinit: No package 'x11' found Message-ID: <060.daa593d52084c52d03912a6602fae7ec@macports.org> #16743: Can't build xinit: No package 'x11' found --------------------------------------+------------------------------------- Reporter: pgijnxn02 at sneakemail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: xinit --------------------------------------+------------------------------------- {{{ $ sudo port install -cuv xorg-server ---> Fetching xinit ---> Attempting to fetch xinit-1.0.8.tar.bz2 from http://distfiles.macports.org/xinit ---> Verifying checksum(s) for xinit ---> Extracting xinit ---> Configuring xinit Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_mports_trunk_dports_x11_xinit/work/xinit-1.0.8" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man " returned error 1 Command output: checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for pid_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for killpg... yes checking for launchd... yes checking for pkg-config... /opt/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for XINIT... configure: error: Package requirements (x11) were not met: No package 'x11' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XINIT_CFLAGS and XINIT_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 13:00:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 20:00:43 -0000 Subject: [MacPorts] #16720: gnome-desktop 2.24.0 build failure In-Reply-To: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> References: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> Message-ID: <064.df137aeb21cf60928cf6e5e18c859878@macports.org> #16720: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gnome-desktop | ----------------------------------+----------------------------------------- Comment(by pgijnxn02 at sneakemail.com): Here's the [http://bugzilla.gnome.org/show_bug.cgi?id=554263 upstream gnome bug]. I will attempt to install a newer [http://www.x.org/wiki/Releases/7.3 X Server] to solve this. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 13:58:44 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 20:58:44 -0000 Subject: [MacPorts] #16139: erlang R12B-3 fails to build when unixODBC is present In-Reply-To: <054.89b955426cc33730464f9ba8eb69553e@macports.org> References: <054.89b955426cc33730464f9ba8eb69553e@macports.org> Message-ID: <063.8765e40936419ea64bb00535060dc9ff@macports.org> #16139: erlang R12B-3 fails to build when unixODBC is present ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: bfulgham at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: odbc Port: erlang | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [ticket:16139 db.evans@?]: > while attempting to upgrade erlang R12B-3 on Tiger (10.4.11 ppc) build failed with following error > > > This issue has been fixed in R12B-4. The ticket can be closed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 14:00:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 21:00:43 -0000 Subject: [MacPorts] #16741: py25-setuptools error during deluge install In-Reply-To: <058.e58f597f8a43da9eb982d09a3b4b0e33@macports.org> References: <058.e58f597f8a43da9eb982d09a3b4b0e33@macports.org> Message-ID: <067.1ad8561ad4df032ba6e5b1ddf311343a@macports.org> #16741: py25-setuptools error during deluge install -------------------------------------+-------------------------------------- Reporter: ltmayonnaise at gmail.com | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: deluge py25-setuptools error Port: py25-setuptools | -------------------------------------+-------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => stechert at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 14:01:42 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 21:01:42 -0000 Subject: [MacPorts] #16139: erlang R12B-3 fails to build when unixODBC is present In-Reply-To: <054.89b955426cc33730464f9ba8eb69553e@macports.org> References: <054.89b955426cc33730464f9ba8eb69553e@macports.org> Message-ID: <063.5c2f9e1bec6a957cf329be4a356a9899@macports.org> #16139: erlang R12B-3 fails to build when unixODBC is present ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: bfulgham at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: odbc Port: erlang | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * status: new => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 14:16:07 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 21:16:07 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.948013f0605d7ef0dd85f9584dbc0470@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by jmr at macports.org): Replying to [comment:3 macsforever2000@?]: > What will happen in the case of py-ctypes which is built into Python 2.5+? I suppose that ports that depend on it should only do so if a python <= 2.4 variant is set. And also py-ctypes should not declare python25+ variants (a capability yet to be added to the portgroup). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 14:21:07 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 21:21:07 -0000 Subject: [MacPorts] #16743: Can't build xinit: No package 'x11' found In-Reply-To: <060.daa593d52084c52d03912a6602fae7ec@macports.org> References: <060.daa593d52084c52d03912a6602fae7ec@macports.org> Message-ID: <069.602d98125d8e53041fc05f9a488db2d3@macports.org> #16743: Can't build xinit: No package 'x11' found ---------------------------------------+------------------------------------ Reporter: pgijnxn02 at sneakemail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: xinit | ---------------------------------------+------------------------------------ Comment(by macsforever2000 at macports.org): Do you have X11 installed? If not, get it from [http://xquartz.macosforge.org/ here]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 14:36:56 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 21:36:56 -0000 Subject: [MacPorts] #16743: Can't build xinit: No package 'x11' found In-Reply-To: <060.daa593d52084c52d03912a6602fae7ec@macports.org> References: <060.daa593d52084c52d03912a6602fae7ec@macports.org> Message-ID: <069.cce99dfcc2ec2603a89456de5bf00093@macports.org> #16743: Can't build xinit: No package 'x11' found ---------------------------------------+------------------------------------ Reporter: pgijnxn02 at sneakemail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: xinit | ---------------------------------------+------------------------------------ Comment(by ram at macports.org): Is this Leopard by any chance? Make sure you've install the X11 SDK from Xcode if you're using the unofficial Xquartz releases. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 14:39:45 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 21:39:45 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.60fc6c82d48bf1d0bf80e5bf9173e5bd@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => tcurdt at vafer.org * port: => exiv2 Old description: > On Mac0S 10.4.11, I receive this error when attempting to install exiv2: > > ---> Building exiv2 with target all > Error: Target org.macports.build returned: shell command " cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exiv2/work/exiv2-0.17.1" > && make all " returned error 2 > Command output: if test "x1" = "x1"; then cd xmpsdk/src && make xmpsdk; > fi; > make[1]: Nothing to be done for `xmpsdk'. > cd src && make all > > Any help is appreciated! Thanks. New description: On Mac0S 10.4.11, I receive this error when attempting to install exiv2: {{{ ---> Building exiv2 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exiv2/work/exiv2-0.17.1" && make all " returned error 2 Command output: if test "x1" = "x1"; then cd xmpsdk/src && make xmpsdk; fi; make[1]: Nothing to be done for `xmpsdk'. cd src && make all }}} Any help is appreciated! Thanks. -- Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 14:47:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 21:47:43 -0000 Subject: [MacPorts] #16530: taglib 1.5 universal variant build error In-Reply-To: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> References: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> Message-ID: <065.699ff2ec9b60dcf99f19f71157c56c79@macports.org> #16530: taglib 1.5 universal variant build error -----------------------------------+---------------------------------------- Reporter: verwymeren at gmail.com | Owner: macsforever2000 at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: taglib universal build error Port: taglib | -----------------------------------+---------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 14:49:52 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 21:49:52 -0000 Subject: [MacPorts] #16530: taglib 1.5 universal variant build error In-Reply-To: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> References: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> Message-ID: <065.ae371c8b2bdf14ae9885d3336ee45855@macports.org> #16530: taglib 1.5 universal variant build error -----------------------------------+---------------------------------------- Reporter: verwymeren at gmail.com | Owner: macsforever2000 at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: taglib universal build error Port: taglib | -----------------------------------+---------------------------------------- Comment(by macsforever2000 at macports.org): I'm seeing the following error: {{{ $ sudo port install taglib +universal ---> Fetching taglib ---> Attempting to fetch taglib-1.5.tar.gz from http://distfiles.macports.org/taglib ---> Verifying checksum(s) for taglib ---> Extracting taglib ---> Configuring taglib ---> Building taglib Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5" && make all " returned error 2 Command output: rm -fr .libs/libtag.lax/libtoolkit.a mkdir .libs/libtag.lax/libtoolkit.a Extracting /opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5/taglib/./toolkit/.libs/libtoolkit.a libtoolkit.a has multiple architectures ppc i386 (cd /opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5/taglib/.libs/libtag.lax/libtoolkit.a/unfat-44962/libtoolkit.a-ppc && ar x libtoolkit.a) (cd /opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5/taglib/.libs/libtag.lax/libtoolkit.a/unfat-44962/libtoolkit.a-i386 && ar x libtoolkit.a) rm -fr .libs/libtag.lax/libwavpack.a mkdir .libs/libtag.lax/libwavpack.a Extracting /opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5/taglib/./wavpack/.libs/libwavpack.a libwavpack.a has multiple architectures ppc i386 (cd /opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5/taglib/.libs/libtag.lax/libwavpack.a/unfat-44962/libwavpack.a-ppc && ar x libwavpack.a) (cd /opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5/taglib/.libs/libtag.lax/libwavpack.a/unfat-44962/libwavpack.a-i386 && ar x libwavpack.a) rm -fr .libs/libtag.lax/libtrueaudio.a mkdir .libs/libtag.lax/libtrueaudio.a Extracting /opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5/taglib/./trueaudio/.libs/libtrueaudio.a libtrueaudio.a has multiple architectures ppc i386 (cd /opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5/taglib/.libs/libtag.lax/libtrueaudio.a/unfat-44962/libtrueaudio.a-ppc && ar x libtrueaudio.a) (cd /opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_audio_taglib/work/taglib-1.5/taglib/.libs/libtag.lax/libtrueaudio.a/unfat-44962/libtrueaudio.a-i386 && ar x libtrueaudio.a) /usr/bin/g++-4.0 -dynamiclib -o .libs/libtag.1.5.0.dylib .libs/tag.o .libs/tagunion.o .libs/fileref.o .libs/audioproperties.o .libs/libtag.lax/libmpeg.a/attachedpictureframe.o .libs/libtag.lax/libmpeg.a/commentsframe.o .libs/libtag.lax/libmpeg.a/generalencapsulatedobjectframe.o .libs/libtag.lax/libmpeg.a/id3v1genres.o .libs/libtag.lax/libmpeg.a/id3v1tag.o .libs/libtag.lax/libmpeg.a/id3v2extendedheader.o .libs/libtag.lax/libmpeg.a/id3v2footer.o .libs/libtag.lax/libmpeg.a/id3v2frame.o .libs/libtag.lax/libmpeg.a/id3v2framefactory.o .libs/libtag.lax/libmpeg.a/id3v2header.o .libs/libtag.lax/libmpeg.a/id3v2synchdata.o .libs/libtag.lax/libmpeg.a/id3v2tag.o .libs/libtag.lax/libmpeg.a/mpegfile.o .libs/libtag.lax/libmpeg.a/mpegheader.o .libs/libtag.lax/libmpeg.a/mpegproperties.o .libs/libtag.lax/libmpeg.a/relativevolumeframe.o .libs/libtag.lax/libmpeg.a/textidentificationframe.o .libs/libtag.lax/libmpeg.a/uniquefileidentifierframe.o .libs/libtag.lax/libmpeg.a/unknownframe.o .libs/libtag.lax/libmpeg.a/unsynchronizedlyricsframe.o .libs/libtag.lax/libmpeg.a/urllinkframe.o .libs/libtag.lax/libmpeg.a/xingheader.o .libs/libtag.lax/libogg.a/oggfile.o .libs/libtag.lax/libogg.a/oggflacfile.o .libs/libtag.lax/libogg.a/oggpage.o .libs/libtag.lax/libogg.a/oggpageheader.o .libs/libtag.lax/libogg.a/speexfile.o .libs/libtag.lax/libogg.a/speexproperties.o .libs/libtag.lax/libogg.a/vorbisfile.o .libs/libtag.lax/libogg.a/vorbisproperties.o .libs/libtag.lax/libogg.a/xiphcomment.o .libs/libtag.lax/libflac.a/flacfile.o .libs/libtag.lax/libflac.a/flacproperties.o .libs/libtag.lax/libmpc.a/mpcfile.o .libs/libtag.lax/libmpc.a/mpcproperties.o .libs/libtag.lax/libape.a/apefooter.o .libs/libtag.lax/libape.a/apeitem.o .libs/libtag.lax/libape.a/apetag.o .libs/libtag.lax/libtoolkit.a/tbytevector.o .libs/libtag.lax/libtoolkit.a/tbytevectorlist.o .libs/libtag.lax/libtoolkit.a/tdebug.o .libs/libtag.lax/libtoolkit.a/tfile.o .libs/libtag.lax/libtoolkit.a/tstring.o .libs/libtag.lax/libtoolkit.a/tstringlist.o .libs/libtag.lax/libtoolkit.a/unicode.o .libs/libtag.lax/libwavpack.a/wavpackfile.o .libs/libtag.lax/libwavpack.a/wavpackproperties.o .libs/libtag.lax/libtrueaudio.a/trueaudiofile.o .libs/libtag.lax/libtrueaudio.a/trueaudioproperties.o -L/opt/local/lib -lz -isysroot /Developer/SDKs/MacOSX10.5.sdk -arch ppc -arch i386 -mmacosx-version-min=10.5 -arch ppc -arch i386 -mmacosx-version-min=10.5 -install_name /opt/local/lib/libtag.1.dylib -compatibility_version 7 -current_version 7.0 -Wl,-single_module ld warning: in /opt/local/lib/libz.dylib, file is not of required architecture Undefined symbols: "_uncompress", referenced from: TagLib::ID3v2::Frame::fieldData(TagLib::ByteVector const&) constin id3v2frame.o ld: symbol(s) not found collect2: ld returned 1 exit status lipo: can't open input file: /var/tmp//ccp00usq.out (No such file or directory) make[3]: *** [libtag.la] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 15:00:33 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 22:00:33 -0000 Subject: [MacPorts] #16530: taglib 1.5 universal variant build error In-Reply-To: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> References: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> Message-ID: <065.12b5fdaf95bdd69b6ab4cc767f65005b@macports.org> #16530: taglib 1.5 universal variant build error -----------------------------------+---------------------------------------- Reporter: verwymeren at gmail.com | Owner: macsforever2000 at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: taglib universal build error Port: taglib | -----------------------------------+---------------------------------------- Comment(by blb at macports.org): Is your /opt/local/lib/libz.dylib built universal (eg, zlib is +universal as well)? Also verify with {{{file /opt/local/lib/libz.dylib}}}. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 15:01:53 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 22:01:53 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.c894749dc90baa49d6a953dba5074dab@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by tcurdt at vafer.org): Please do a self update to get the latest version (0.17.1) and then try again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 15:50:32 2008 From: noreply at macports.org (MacPorts) Date: Fri, 03 Oct 2008 22:50:32 -0000 Subject: [MacPorts] #16530: taglib 1.5 universal variant build error In-Reply-To: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> References: <056.3c9e5c4db0e73b3d43f2372e113666cc@macports.org> Message-ID: <065.b2d942a8565e28b61c7839d9c63b0670@macports.org> #16530: taglib 1.5 universal variant build error -----------------------------------+---------------------------------------- Reporter: verwymeren at gmail.com | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: taglib universal build error Port: taglib | -----------------------------------+---------------------------------------- Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: That got it. Committed revision r40498. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 17:46:02 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 00:46:02 -0000 Subject: [MacPorts] #16743: Can't build xinit: No package 'x11' found In-Reply-To: <060.daa593d52084c52d03912a6602fae7ec@macports.org> References: <060.daa593d52084c52d03912a6602fae7ec@macports.org> Message-ID: <069.c02c58c1b21d9f5a95a02d88393ba845@macports.org> #16743: Can't build xinit: No package 'x11' found ---------------------------------------+------------------------------------ Reporter: pgijnxn02 at sneakemail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: xinit | ---------------------------------------+------------------------------------ Comment(by pgijnxn02 at sneakemail.com): This is on Tiger (10.4.11). I have X11, Xcode, and the X11SDK, and I have some working X11 applications from macports. My hope was that this package would upgrade my version of X11 so I could install gnome-desktop ([https://trac.macports.org/ticket/16720]). I looked at Xquartz, which looked like it would also be a solution, but I see that's only for Leopard. Hmm. Is there any way to upgrade X11 on Tiger to support Xrandr 1.2? Thanks for your help. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 19:56:29 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 02:56:29 -0000 Subject: [MacPorts] #16692: llvm-g++-4.2 can't build simple STL program In-Reply-To: <059.345ecc820cff7161137bf07f402e3ab2@macports.org> References: <059.345ecc820cff7161137bf07f402e3ab2@macports.org> Message-ID: <068.606ab2ac06d5d22079a72cab2ff36c1f@macports.org> #16692: llvm-g++-4.2 can't build simple STL program --------------------------------------+------------------------------------- Reporter: andrea.bedini at gmail.com | Owner: erickt at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: llvm-gcc42 | --------------------------------------+------------------------------------- Changes (by macsforever2000 at macports.org): * cc: erickt at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => erickt at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 20:33:37 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 03:33:37 -0000 Subject: [MacPorts] #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp-parser.c In-Reply-To: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> References: <060.36154e6cc149495a9023f0057f4ff4fd@macports.org> Message-ID: <069.effaa956eb885ba78471d2ade3d9c16f@macports.org> #16554: Gnucash 2.2.5_1 does not build due to typos in gnc-module.c and gnc-exp- parser.c ---------------------------------------+------------------------------------ Reporter: pgijnxn02 at sneakemail.com | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: build, typo Port: gnucash | ---------------------------------------+------------------------------------ Comment(by pgijnxn02 at sneakemail.com): Works for me now :) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 21:08:02 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 04:08:02 -0000 Subject: [MacPorts] #16733: Tidy Update Request In-Reply-To: <058.e424009e48a57bb2349ae399959f0f2f@macports.org> References: <058.e424009e48a57bb2349ae399959f0f2f@macports.org> Message-ID: <067.183218d9f1903c16fca3bdb6d9735d86@macports.org> #16733: Tidy Update Request -------------------------------------+-------------------------------------- Reporter: william.dinoia at mac.com | Owner: ryandesign at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: tidy update request Port: tidy | -------------------------------------+-------------------------------------- Comment(by ryandesign at macports.org): Actually it looks like they're not assigning version numbers or more importantly tags in CVS. That means we cannot pull from CVS and reliably get the same build each time. We will have to make our own source packages and host them at MacPorts. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 23:07:45 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 06:07:45 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.806b0b08be22d610d51bb332af904d4a@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): port:webkit-gtk will install gstreamer and gst-plugins-base. which will install libtheora, libvorbis, libogg etc Gimp 2.6 is turning out to be insanely huge. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 23:12:52 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 06:12:52 -0000 Subject: [MacPorts] #16729: graphics/babl-0.0.22: new port In-Reply-To: <054.1c69484347adb5fc1963ec0ccb9194cb@macports.org> References: <054.1c69484347adb5fc1963ec0ccb9194cb@macports.org> Message-ID: <063.ef0041615a7a06fc849b929f98e6c425@macports.org> #16729: graphics/babl-0.0.22: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: graphics babl Port: babl | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): Tested and verified on Mac OS X Leopard 10.5.5 on Intel -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 3 23:51:15 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 06:51:15 -0000 Subject: [MacPorts] #16581: xfce doesn't starts In-Reply-To: <058.11f146ee891533cd45ead042ea1a80eb@macports.org> References: <058.11f146ee891533cd45ead042ea1a80eb@macports.org> Message-ID: <067.9d81576a9db45ebd5812ef9efd7521e1@macports.org> #16581: xfce doesn't starts -------------------------------------+-------------------------------------- Reporter: kvyatkovskii at gmail.com | Owner: afb at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: xfce | -------------------------------------+-------------------------------------- Comment(by afb at macports.org): I believe this is http://bugzilla.xfce.org/show_bug.cgi?id=4193, will try that patch. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 00:40:45 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 07:40:45 -0000 Subject: [MacPorts] #16744: Allow universal builds in clucene, cyrus-sasl2, gpgme, flac, pth Message-ID: <056.0f39cff6ca5536b1eb2e9ab8ee360112@macports.org> #16744: Allow universal builds in clucene, cyrus-sasl2, gpgme, flac, pth ----------------------------------+----------------------------------------- Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: universal build | Port: clucene cyrus-sasl2 gpgme flac pth ----------------------------------+----------------------------------------- The attached diff allow universal with the ports listed above -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 00:48:37 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 07:48:37 -0000 Subject: [MacPorts] #16745: Allow macports to compile with apple's gcc 4.2 Message-ID: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> #16745: Allow macports to compile with apple's gcc 4.2 -------------------------------------------------+-------------------------- Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: fix compilation gcc 4.2 apple-gcc42 | Port: expat giflib ilmbase jasper lcms libgpg-error libvorbis lzmautils openexr subversion tiff flac pth -------------------------------------------------+-------------------------- The following Portfile patches allow compilation with apple's gcc 4.2. Tested on 10.4. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 00:53:30 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 07:53:30 -0000 Subject: [MacPorts] #16741: py25-setuptools error during deluge install In-Reply-To: <058.e58f597f8a43da9eb982d09a3b4b0e33@macports.org> References: <058.e58f597f8a43da9eb982d09a3b4b0e33@macports.org> Message-ID: <067.02b1f8b96ff9839155b1d5292c570106@macports.org> #16741: py25-setuptools error during deluge install -------------------------------------+-------------------------------------- Reporter: ltmayonnaise at gmail.com | Owner: stechert at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: deluge py25-setuptools error Port: py25-setuptools | -------------------------------------+-------------------------------------- Changes (by stechert at macports.org): * status: new => assigned Comment: So, error 139 is the shell's tricky way of telling you you had a seg fault (return values from a process are in the range 0-127 for regular return values. > 128 indicates that a signal terminated the process with the difference from 128 indicating which signal. 128 + 11 = 139. SIGSEGV = 11. That makes me think this is really not a setuptools bug. Have you actually started your python before this? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 01:54:41 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 08:54:41 -0000 Subject: [MacPorts] #16746: python/py25-pygments 0.11.1 Message-ID: <059.3d583d461c788568f63c508ae32e0195@macports.org> #16746: python/py25-pygments 0.11.1 -------------------------------------+-------------------------------------- Reporter: arthur at arthurkoziel.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: pygments | Port: -------------------------------------+-------------------------------------- Update from 0.9 to 0.11.1. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 02:08:24 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 09:08:24 -0000 Subject: [MacPorts] #16694: update py25-wxpython to 2.8.9.1 In-Reply-To: <064.46ae5d649c45990c6762ceb05047aff8@macports.org> References: <064.46ae5d649c45990c6762ceb05047aff8@macports.org> Message-ID: <073.5371f88d5803eb8d5f70c462ef29901c@macports.org> #16694: update py25-wxpython to 2.8.9.1 -------------------------------------------+-------------------------------- Reporter: macsforever2000 at macports.org | Owner: mww at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: py25-wxpython, py-wxpython | -------------------------------------------+-------------------------------- Changes (by jwa at macports.org): * status: new => closed * resolution: => fixed Comment: closed with r40471 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 03:20:52 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 10:20:52 -0000 Subject: [MacPorts] #16692: llvm-g++-4.2 can't build simple STL program In-Reply-To: <059.345ecc820cff7161137bf07f402e3ab2@macports.org> References: <059.345ecc820cff7161137bf07f402e3ab2@macports.org> Message-ID: <068.281497b25a2b86adeb12584bebba53a3@macports.org> #16692: llvm-g++-4.2 can't build simple STL program --------------------------------------+------------------------------------- Reporter: andrea.bedini at gmail.com | Owner: erickt at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: llvm-gcc42 | --------------------------------------+------------------------------------- Comment(by andrea.bedini at gmail.com): compiling llvm-gcc42 without --with-gxx-include-dir=/usr/include/c++/4.0.0 seems to partially fix the problem. I still have to specify a bunch on directories (-I /opt/local/include/gcc42/c++/ -I /opt/local/include/gcc42/c++/i386-apple-darwin8.11.1/ -L/opt/local/lib/gcc42/) but it's now able to compile any C++ source I tried. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 05:46:48 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 12:46:48 -0000 Subject: [MacPorts] #16745: Allow macports to compile with apple's gcc 4.2 In-Reply-To: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> References: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> Message-ID: <065.74b1ba40dfc996b3b995398609a10201@macports.org> #16745: Allow macports to compile with apple's gcc 4.2 -----------------------------------------------------------------------------------------------------------------+ Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: fix compilation gcc 4.2 apple-gcc42 Port: expat giflib ilmbase jasper lcms libgpg-error libvorbis lzmautils openexr subversion tiff flac pth | -----------------------------------------------------------------------------------------------------------------+ Comment(by illogical1 at gmail.com): universal_build_boost-jam.diff is for another ticket. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 05:49:48 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 12:49:48 -0000 Subject: [MacPorts] #14064: boost-1.34.1 universal patch In-Reply-To: <053.fa19e511f5c7c974e828c0bde3633608@macports.org> References: <053.fa19e511f5c7c974e828c0bde3633608@macports.org> Message-ID: <062.b35d5a25ffab1527889dad13fb96f06d@macports.org> #14064: boost-1.34.1 universal patch --------------------------------+------------------------------------------- Reporter: ken at hotchachi.com | Owner: sanchom at gmail.com Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: boost universal --------------------------------+------------------------------------------- Comment(by illogical1 at gmail.com): I can confirm that these patches work fine on 10.4 for boost 1.35.0. I attached the complete Portfile diffs as a part of ticket https://trac.macports.org/ticket/16744 as well. patch-build.sh is still needed. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 06:12:45 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 13:12:45 -0000 Subject: [MacPorts] #14228: update xine-lib version to 1.1.9.1 and allow building on intel machines In-Reply-To: <056.3358d5f7923946d168b2b24d880767b0@macports.org> References: <056.3358d5f7923946d168b2b24d880767b0@macports.org> Message-ID: <065.e9bf34e76c0551bebfdcd9654738cd5a@macports.org> #14228: update xine-lib version to 1.1.9.1 and allow building on intel machines -----------------------------------+---------------------------------------- Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: -----------------------------------+---------------------------------------- Comment(by illogical1 at gmail.com): 1.1.14 compiles fine on x86 so the patches aren't necessary anymore. This ticket can be marked as fixed. Universal compilation doesn't work so well, but that's another issue (and ticket). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 08:11:08 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 15:11:08 -0000 Subject: [MacPorts] #16720: gnome-desktop 2.24.0 build failure In-Reply-To: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> References: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> Message-ID: <064.93631a1275e4a0347ef659d548ff0b42@macports.org> #16720: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gnome-desktop | ----------------------------------+----------------------------------------- Comment(by pgijnxn02 at sneakemail.com): Alas, it appears there's no way to upgrade the X Server in Tiger. Is that correct? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 09:41:03 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 16:41:03 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.33a675d15f84d68df97057d85b4e3885@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by jsnodgra at umich.edu): I did a selfupdate, and then did a clean --all on exiv2. I still receive the same error... -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 09:55:46 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 16:55:46 -0000 Subject: [MacPorts] #16747: install Message-ID: <059.4a1ad71a221a29437e1e7119400eb9de@macports.org> #16747: install -------------------------------------+-------------------------------------- Reporter: jules.moskowitz at nyu.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------------+-------------------------------------- I attempted to install macports on a macbook with OS 10.5.5 from macports-1.6.0pkg. I got the following message: Install step failed. run postflight script for macports1.6.0 Any suggestions? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 10:20:26 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 17:20:26 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.19a9a4b8475e54672586f2d39c5d8fb4@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by tcurdt at vafer.org): Sorry, don't have a 10.4 machine available. Can only say building 0.17.1 on 10.5 worked just fine (for me). Just to find the problem: can you download the exiv2 0.17.1 source and do a ./configure make just to see if that builds for you? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 10:23:00 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 17:23:00 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.26f7c44130036fc1dd36dc79a2d91025@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by tcurdt at vafer.org): The formatting swallowed the line break. Of course I meant: {{{./configure}}}[[BR]] {{{make}}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 11:03:01 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 18:03:01 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.9e37179f9da1fd6116c90cce015c6b7e@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): Tested and verified on Mac OSX Leopard 10.5.5 intel this port installed around 70 ports to fulfill its dependencies. gegl developers should provide switches to enable/disable the optional dependencies -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 11:11:10 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 18:11:10 -0000 Subject: [MacPorts] #16748: gnucash-2.2.7 Dependency problem - wrong name Message-ID: <063.e621ee5c9f8241ae564ef00bc17abf00@macports.org> #16748: gnucash-2.2.7 Dependency problem - wrong name -----------------------------------------+---------------------------------- Reporter: lorenzo.costanzia at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: gnucash -----------------------------------------+---------------------------------- Changes name of dependency from "aqbanking3" to "aqbanking". -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 11:32:52 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 18:32:52 -0000 Subject: [MacPorts] #14228: update xine-lib version to 1.1.9.1 and allow building on intel machines In-Reply-To: <056.3358d5f7923946d168b2b24d880767b0@macports.org> References: <056.3358d5f7923946d168b2b24d880767b0@macports.org> Message-ID: <065.05d664ad4dec947d99764939d320094a@macports.org> #14228: update xine-lib version to 1.1.9.1 and allow building on intel machines -----------------------------------+---------------------------------------- Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: xine-lib | -----------------------------------+---------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => fixed * port: => xine-lib -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 11:38:53 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 18:38:53 -0000 Subject: [MacPorts] #16748: gnucash-2.2.7 Dependency problem - wrong name In-Reply-To: <063.e621ee5c9f8241ae564ef00bc17abf00@macports.org> References: <063.e621ee5c9f8241ae564ef00bc17abf00@macports.org> Message-ID: <072.a1eac83d795dec9982e7f24a8fa4b02a@macports.org> #16748: gnucash-2.2.7 Dependency problem - wrong name ------------------------------------------+--------------------------------- Reporter: lorenzo.costanzia at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: gnucash | ------------------------------------------+--------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => fixed Comment: This was already done in r40488. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 12:53:43 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 19:53:43 -0000 Subject: [MacPorts] #16747: install In-Reply-To: <059.4a1ad71a221a29437e1e7119400eb9de@macports.org> References: <059.4a1ad71a221a29437e1e7119400eb9de@macports.org> Message-ID: <068.b31521e389ebf28251759132b320cf89@macports.org> #16747: install --------------------------------------+------------------------------------- Reporter: jules.moskowitz at nyu.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | --------------------------------------+------------------------------------- Comment(by blb at macports.org): It could have failed for several reasons; do you know if you are able to use rsync from your network location (if not, this could have caused the selfupdate to fail). If you try to run 'port version' in Terminal and see 'command not found', it could have failed to update your .profile; see [http://trac.macports.org/wiki/ProblemHotlist#a.profilenotsetup .profile not setup] to deal with that. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 13:00:54 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 20:00:54 -0000 Subject: [MacPorts] #16749: git-core 1.6.0.2 - incorrect handling of html documentation Message-ID: <053.c290c2446d40619059754c98021e028d@macports.org> #16749: git-core 1.6.0.2 - incorrect handling of html documentation -------------------------------+-------------------------------------------- Reporter: luc at honk-honk.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: documentation | Port: git-core -------------------------------+-------------------------------------------- Git expects its html documentation to be in a precise place, represented by the ''GIT_HTML_PATH'' environment variable in the source (builtin- help.c), set in the Makefile from the ''htmldir'' variable. The default git html path is ''$(sharedir)/doc/git-doc'' but the git-core Portfile installs all doc files including the html files in ''${prefix}/share/doc /git-core''. This makes commands like ''git help --web COMMAND'' to fail with the following error message: "fatal: '/opt/local/share/doc/git-doc': not a documentation directory". The git-core Portfile should either modify the ''htmldir'' variable in the Makefile or install the html documenation files in the correct location. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 14:14:54 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 21:14:54 -0000 Subject: [MacPorts] #16750: postgresql83 port enhancement Message-ID: <064.2938507ae6b1940bf352e5c64c4f6027@macports.org> #16750: postgresql83 port enhancement ------------------------------------------+--------------------------------- Reporter: darren.weber.lists at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | Port: postgresql83 ------------------------------------------+--------------------------------- There are no major changes to the default config and build options. There are more variants and the default variants are set, including --with-doc (this might conflict with postgresql83-doc, but that Portfile seems to disable some config options that are set for postgresql83, for some reason unknown to me). The long_description includes more information about the default variants and the installation config. The post-install includes information about the -server port (as before), plus info for the +doc variant. In general, the file now starts with the vim/emacs format line and this port was :retab(ed) in macvim. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 14:31:44 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 21:31:44 -0000 Subject: [MacPorts] #16660: rb-password and cracklib In-Reply-To: <054.356acda04059ae450cb0225b359004c4@macports.org> References: <054.356acda04059ae450cb0225b359004c4@macports.org> Message-ID: <063.ccae5f2b3b1a31ae504bd149fd2aa596@macports.org> #16660: rb-password and cracklib ---------------------------------+------------------------------------------ Reporter: artrigue at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: rb-password | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: new => closed * resolution: => fixed Comment: Committed in r40509. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 14:38:45 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 21:38:45 -0000 Subject: [MacPorts] #16031: Webalizer can't download source file In-Reply-To: <056.491b6d7e4997307dccceaeb208d2ea95@macports.org> References: <056.491b6d7e4997307dccceaeb208d2ea95@macports.org> Message-ID: <065.66a187e8b199f3b0f3ab1d9aa3015fdc@macports.org> #16031: Webalizer can't download source file -----------------------------------+---------------------------------------- Reporter: brad at onetwothree.net | Owner: mike.mclean at pobox.com Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: webalizer | -----------------------------------+---------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => fixed * port: => webalizer Old description: > this is the output of port: > > ---> Fetching webalizer > ---> webalizer-2.01-10-src.tgz doesn't seem to exist in > /opt/local/var/macports/distfiles/webalizer > ---> Attempting to fetch webalizer-2.01-10-src.tgz from > ftp://ftp.mrunix.net/pub/webalizer > % Total % Received % Xferd Average Speed Time Time Time > Current > Dload Upload Total Spent Left > Speed > 0 0 0 0 0 0 0 0 --:--:-- 0:00:11 --:--:-- > 0 > Error: Target org.macports.fetch returned: fetch failed > Warning: the following items did not execute (for webalizer): > org.macports.activate org.macports.fetch org.macports.extract > org.macports.checksum org.macports.patch org.macports.configure > org.macports.build org.macports.destroot org.macports.install > Error: Status 1 encountered during processing. New description: this is the output of port: {{{ ---> Fetching webalizer ---> webalizer-2.01-10-src.tgz doesn't seem to exist in /opt/local/var/macports/distfiles/webalizer ---> Attempting to fetch webalizer-2.01-10-src.tgz from ftp://ftp.mrunix.net/pub/webalizer % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- 0:00:11 --:--:-- 0 Error: Target org.macports.fetch returned: fetch failed Warning: the following items did not execute (for webalizer): org.macports.activate org.macports.fetch org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. }}} -- Comment: I forgot about this, sorry. Committed the patch in r40511. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 14:43:21 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 21:43:21 -0000 Subject: [MacPorts] #16750: postgresql83 port enhancement In-Reply-To: <064.2938507ae6b1940bf352e5c64c4f6027@macports.org> References: <064.2938507ae6b1940bf352e5c64c4f6027@macports.org> Message-ID: <073.14bb45a60441d14a06f1474e1a0808fc@macports.org> #16750: postgresql83 port enhancement -------------------------------------------+-------------------------------- Reporter: darren.weber.lists at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: postgresql83 | -------------------------------------------+-------------------------------- Comment(by blb at macports.org): With all the whitespace changes it's tough to see what modification you are making; it'd be best to make functional changes separate from whitespace ones. However, note that postgresql83-doc is the one you want for documentation, as it is an add-on to the base postgresql83 port (though whether a variant or a separate port is better is debatable, since I doubt much is going to need to depend on a doc port). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 14:46:20 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 21:46:20 -0000 Subject: [MacPorts] #15685: Etoile fails to build In-Reply-To: <059.87c9c66787427c503cfb543dbaf9aa79@macports.org> References: <059.87c9c66787427c503cfb543dbaf9aa79@macports.org> Message-ID: <068.6c3161ee0dc5aef3170bf325320450f0@macports.org> #15685: Etoile fails to build --------------------------------------+------------------------------------- Reporter: carlos_lemare at yahoo.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: etoile | --------------------------------------+------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * keywords: etoile fails to build => * port: => etoile Old description: > Etoile fails to build in my powerbook. The error it shows is this: > > Clemare-PowerBook:~ clemare$ sudo port install etoile > ---> Building Etoile with target all > Error: Target org.macports.build returned: shell command " cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_Etoile/work/Etoile" > && gnumake all messages=yes > GNUSTEP_MAKEFILES=/opt/local/GNUstep/System/Library/Makefiles azalea=no > background=no dock=no login=no corner=no idle=no azswitch=no jabber=no > outerspace=no sketch=no " returned error 2 > Command output: ln -s Versions/Current/Resources Resources; \ > fi; \ > if [ ! -h "Headers" ]; then \ > rm -f Headers; \ > ln -s Versions/Current/Headers Headers; \ > fi > cd ./derived_src; \ > if [ ! -h "PopplerKit" ]; then \ > rm -f ./PopplerKit; \ > ln -s ../PopplerKit.framework/Headers \ > ./PopplerKit; \ > fi > Making all in subprojects of framework PopplerKit... > Making all for subproject bindings... > g++-mp-4.2 poppler.cc -c \ > -MMD -MP -I/opt/local/include -DGNUSTEP -DGNUSTEP_BASE_LIBRARY=1 > -DGNU_GUI_LIBRARY=1 -DGNU_RUNTIME=1 -DGNUSTEP_BASE_LIBRARY=1 -fno-common > -g -Wall -DDEBUG -fno-omit-frame-pointer -DGSWARN -DGSDIAGNOSE -Wno- > import -I/opt/local/include/poppler -I/opt/local/include > -I/opt/local/include/poppler -I/opt/local/include/freetype2 > -I/opt/local/include -g -DPOPPLER_0_5 -I./MissingKit > -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_Etoile/work/Etoile/Build > -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_Etoile/work/Etoile/Frameworks/PopplerKit > -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_Etoile/work/Etoile/Frameworks/PopplerKit/Headers > -I/usr/X11R6/include -I/usr/X11R6/include -I./../derived_src -I. > -I/opt/local/GNUstep/Local/Library/Headers/ > -I/opt/local/GNUstep/System/Library/Headers/ \ > -o obj/poppler.o > poppler.cc: In function 'int poppler_init(const unsigned char*, const > unsigned char**, unsigned int)': > poppler.cc:113: warning: comparison between signed and unsigned integer > expressions > poppler.cc:121: warning: too few arguments for format > poppler.cc:126: error: no matching function for call to > 'GlobalParams::GlobalParams(NULL)' > /opt/local/include/poppler/GlobalParams.h:144: note: candidates are: > GlobalParams::GlobalParams() > /opt/local/include/poppler/GlobalParams.h:139: note: > GlobalParams::GlobalParams(const GlobalParams&) > poppler.cc: At global scope: > poppler.cc:25: warning: 'void dump_fonts(FcConfig*)' defined but not used > gnumake[4]: *** [obj/poppler.o] Error 1 > gnumake[3]: *** [bindings.all.subproject.variables] Error 2 > gnumake[2]: *** [PopplerKit.all.framework.variables] Error 2 > gnumake[1]: *** [internal-all] Error 2 > gnumake: *** [internal-all] Error 2 > > Error: Status 1 encountered during processing. New description: Etoile fails to build in my powerbook. The error it shows is this: {{{ Clemare-PowerBook:~ clemare$ sudo port install etoile ---> Building Etoile with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_Etoile/work/Etoile" && gnumake all messages=yes GNUSTEP_MAKEFILES=/opt/local/GNUstep/System/Library/Makefiles azalea=no background=no dock=no login=no corner=no idle=no azswitch=no jabber=no outerspace=no sketch=no " returned error 2 Command output: ln -s Versions/Current/Resources Resources; \ fi; \ if [ ! -h "Headers" ]; then \ rm -f Headers; \ ln -s Versions/Current/Headers Headers; \ fi cd ./derived_src; \ if [ ! -h "PopplerKit" ]; then \ rm -f ./PopplerKit; \ ln -s ../PopplerKit.framework/Headers \ ./PopplerKit; \ fi Making all in subprojects of framework PopplerKit... Making all for subproject bindings... g++-mp-4.2 poppler.cc -c \ -MMD -MP -I/opt/local/include -DGNUSTEP -DGNUSTEP_BASE_LIBRARY=1 -DGNU_GUI_LIBRARY=1 -DGNU_RUNTIME=1 -DGNUSTEP_BASE_LIBRARY=1 -fno-common -g -Wall -DDEBUG -fno-omit-frame-pointer -DGSWARN -DGSDIAGNOSE -Wno-import -I/opt/local/include/poppler -I/opt/local/include -I/opt/local/include/poppler -I/opt/local/include/freetype2 -I/opt/local/include -g -DPOPPLER_0_5 -I./MissingKit -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_Etoile/work/Etoile/Build -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_Etoile/work/Etoile/Frameworks/PopplerKit -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_Etoile/work/Etoile/Frameworks/PopplerKit/Headers -I/usr/X11R6/include -I/usr/X11R6/include -I./../derived_src -I. -I/opt/local/GNUstep/Local/Library/Headers/ -I/opt/local/GNUstep/System/Library/Headers/ \ -o obj/poppler.o poppler.cc: In function 'int poppler_init(const unsigned char*, const unsigned char**, unsigned int)': poppler.cc:113: warning: comparison between signed and unsigned integer expressions poppler.cc:121: warning: too few arguments for format poppler.cc:126: error: no matching function for call to 'GlobalParams::GlobalParams(NULL)' /opt/local/include/poppler/GlobalParams.h:144: note: candidates are: GlobalParams::GlobalParams() /opt/local/include/poppler/GlobalParams.h:139: note: GlobalParams::GlobalParams(const GlobalParams&) poppler.cc: At global scope: poppler.cc:25: warning: 'void dump_fonts(FcConfig*)' defined but not used gnumake[4]: *** [obj/poppler.o] Error 1 gnumake[3]: *** [bindings.all.subproject.variables] Error 2 gnumake[2]: *** [PopplerKit.all.framework.variables] Error 2 gnumake[1]: *** [internal-all] Error 2 gnumake: *** [internal-all] Error 2 Error: Status 1 encountered during processing. }}} -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 15:08:58 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 22:08:58 -0000 Subject: [MacPorts] #15711: scons 0.98.4 fails to build latex files In-Reply-To: <053.c39fdc70f1d93b71a8553ca6895015e8@macports.org> References: <053.c39fdc70f1d93b71a8553ca6895015e8@macports.org> Message-ID: <062.838d1ba59e3789552e9b92be6cd8f738@macports.org> #15711: scons 0.98.4 fails to build latex files --------------------------------+------------------------------------------- Reporter: jjakuze at gmail.com | Owner: landonf at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: scons | --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => landonf at macports.org * port: => scons * milestone: => Port Bugs Old description: > $ scons --version > > SCons by Steven Knight et al.: > script: v0.98.4.r2949, 2008/05/17 23:07:00, by knight on bangkok > engine: v0.98.4.r2949, 2008/05/17 23:07:00, by knight on bangkok > > $ cat SConstruct > > dvi = DVI('example.tex') > > $ scons > > AttributeError: SConsEnvironment instance has no attribute 'DVI': New description: {{{ $ scons --version SCons by Steven Knight et al.: script: v0.98.4.r2949, 2008/05/17 23:07:00, by knight on bangkok engine: v0.98.4.r2949, 2008/05/17 23:07:00, by knight on bangkok $ cat SConstruct dvi = DVI('example.tex') $ scons AttributeError: SConsEnvironment instance has no attribute 'DVI': }}} -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 15:10:08 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 22:10:08 -0000 Subject: [MacPorts] #16398: update scons to 1.0.1 (was: updage scons to 1.0.0) In-Reply-To: <056.65961a1ca2d484fadfbce6e8ae3db68b@macports.org> References: <056.65961a1ca2d484fadfbce6e8ae3db68b@macports.org> Message-ID: <065.a1cabb3eba9ca816a91e84e09532d6c5@macports.org> #16398: update scons to 1.0.1 -----------------------------------+---------------------------------------- Reporter: andrew at fernandes.org | Owner: landonf at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: scons | -----------------------------------+---------------------------------------- Changes (by jmr at macports.org): * keywords: scons => * port: => scons -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 15:12:03 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 22:12:03 -0000 Subject: [MacPorts] #16751: spotlightfs still points to obsoleted libfuse Message-ID: <055.fa9abf1f4295ae97f49b9cccfb51972b@macports.org> #16751: spotlightfs still points to obsoleted libfuse -----------------------------------------+---------------------------------- Reporter: simon at hitzemann.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: spotlightfs macfuse libfuse | Port: -----------------------------------------+---------------------------------- Change dependency of spotlightfs from libfuse to macfuse (patch attached) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 15:18:58 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 22:18:58 -0000 Subject: [MacPorts] #16300: e2fsprogs-1.40.6 Configuration error - build failure In-Reply-To: <064.3ca2ba5ce29b2e562893ee45b894dc7c@macports.org> References: <064.3ca2ba5ce29b2e562893ee45b894dc7c@macports.org> Message-ID: <073.02cc9fa865856b3294f07caa9fe510a6@macports.org> #16300: e2fsprogs-1.40.6 Configuration error - build failure -------------------------------------------+-------------------------------- Reporter: joshua.friedman at mections.net | Owner: misc at mandriva.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: e2fsprogs | -------------------------------------------+-------------------------------- Changes (by jmr at macports.org): * port: => e2fsprogs Old description: > I'm on os x 10.4 and e2fsprogs is failing to link. > > making all in lib/ext2fs > GEN_BSD_SOLIB libext2fs.2.1.dylib > ld: common symbols not allowed with MH_DYLIB output format with the > -multi_module option > tdb.o definition of common _tdb_null (size 8) > /usr/bin/libtool: internal link edit command failed > make[2]: *** [libext2fs.2.1.dylib] Error 1 > make[1]: *** [all-libs-recursive] Error 1 > make: *** [all] Error 2 New description: I'm on os x 10.4 and e2fsprogs is failing to link. {{{ making all in lib/ext2fs GEN_BSD_SOLIB libext2fs.2.1.dylib ld: common symbols not allowed with MH_DYLIB output format with the -multi_module option tdb.o definition of common _tdb_null (size 8) /usr/bin/libtool: internal link edit command failed make[2]: *** [libext2fs.2.1.dylib] Error 1 make[1]: *** [all-libs-recursive] Error 1 make: *** [all] Error 2 }}} -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 15:20:23 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 22:20:23 -0000 Subject: [MacPorts] #15731: samba-4.0.0alpha2 build error - missing blkid/blkid.h In-Reply-To: <055.161d6f750b1094d9b4a2fcb3ef081f3a@macports.org> References: <055.161d6f750b1094d9b4a2fcb3ef081f3a@macports.org> Message-ID: <064.f7384c356982f6ddbee21f68b8d772b2@macports.org> #15731: samba-4.0.0alpha2 build error - missing blkid/blkid.h ----------------------------------+----------------------------------------- Reporter: mforrest at ryerson.ca | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: samba4 blkid.h Port: samba4 | ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * cc: mww at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => mww at macports.org * port: => samba4 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 15:34:31 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 22:34:31 -0000 Subject: [MacPorts] #15546: e2fsprogs port bug In-Reply-To: <055.65ad168245ea2eb0d8a226c58f7a3ab4@macports.org> References: <055.65ad168245ea2eb0d8a226c58f7a3ab4@macports.org> Message-ID: <064.a27d9b3527226b0061d5482f2cd49d78@macports.org> #15546: e2fsprogs port bug ----------------------------------+----------------------------------------- Reporter: groolot at groolot.net | Owner: misc at mandriva.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: e2fsprogs library Port: e2fsprogs | ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * port: => e2fsprogs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 15:51:34 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 22:51:34 -0000 Subject: [MacPorts] #9807: Mozilla wont build In-Reply-To: <077.41da11f0c51e10b757a6e981ad4ba779@macports.org> References: <077.41da11f0c51e10b757a6e981ad4ba779@macports.org> Message-ID: <086.c97211bc4601925e6ab109dcfe0b64c3@macports.org> #9807: Mozilla wont build --------------------------------------------------------+------------------- Reporter: thorsten.johannvorderbrueggen at t-online.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.2 Resolution: | Keywords: Port: mozilla | --------------------------------------------------------+------------------- Changes (by jmr at macports.org): * cc: thorsten.johannvorderbrueggen at t-online.de (removed) * cc: afb at macports.org (added) * port: => mozilla Comment: Guess you might as well commit this, Anders? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 16:18:44 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 23:18:44 -0000 Subject: [MacPorts] #15652: opendx hardcodes X11 prefix In-Reply-To: <052.8c69ec6088f6618a038d591490374076@macports.org> References: <052.8c69ec6088f6618a038d591490374076@macports.org> Message-ID: <061.e2efedcb4339685c6d69a1eacaf3310f@macports.org> #15652: opendx hardcodes X11 prefix -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: gwright at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: fixed | Keywords: Port: opendx | -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * status: new => closed * resolution: => fixed * port: => opendx Comment: Committed in r40515. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 16:37:14 2008 From: noreply at macports.org (MacPorts) Date: Sat, 04 Oct 2008 23:37:14 -0000 Subject: [MacPorts] #16752: aqbanking 3.7.2_0 build fails (wrong libgwenhywfar library version) Message-ID: <055.b15b8613b8dcee940a8e04ada7ae5fcf@macports.org> #16752: aqbanking 3.7.2_0 build fails (wrong libgwenhywfar library version) ---------------------------------+------------------------------------------ Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: aqbanking 3.7.2_0 ---------------------------------+------------------------------------------ I get the following error: {{{ [...] /usr/bin/ld: warning -L: directory name (/sw/lib) does not exist /usr/bin/ld: warning can't open dynamic library: /opt/local/lib/libgwenhywfar.38.dylib referenced from: /opt/local/lib/libaqbanking.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) /usr/bin/ld: Undefined symbols: _GWEN_Buffer_AppendBuffer referenced from libaqbanking.16 expected to be defined in /opt/local/lib/libgwenhywfar.38.dylib _GWEN_Buffer_AppendByte referenced from libaqbanking.16 expected to be defined in /opt/local/lib/libgwenhywfar.38.dylib [...] }}} First, I don't know why it tries to read something from /sw/lib. This is a non-standard library path and there's nothing under that name here. Then I don't have a file /opt/local/lib/libgwenhywfar.38.dylib: {{{ $ ll /opt/local/lib/libgwenhywfar.* -rwxr-xr-x 2 root admin 837124 2008-10-05 01:12:25 /opt/local/lib/libgwenhywfar.47.4.1.dylib* lrwxr-xr-x 1 root admin 26 2008-10-05 01:12:53 /opt/local/lib/libgwenhywfar.47.dylib -> libgwenhywfar.47.4.1.dylib* lrwxr-xr-x 1 root admin 26 2008-10-05 01:12:53 /opt/local/lib/libgwenhywfar.dylib -> libgwenhywfar.47.4.1.dylib* -rwxr-xr-x 2 root admin 1077 2008-10-05 01:12:25 /opt/local/lib/libgwenhywfar.la* }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 17:32:56 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 00:32:56 -0000 Subject: [MacPorts] #16752: aqbanking 3.7.2_0 build fails (wrong libgwenhywfar library version) In-Reply-To: <055.b15b8613b8dcee940a8e04ada7ae5fcf@macports.org> References: <055.b15b8613b8dcee940a8e04ada7ae5fcf@macports.org> Message-ID: <064.63f2cceea20bf39b5b16ddb946e89f6a@macports.org> #16752: aqbanking 3.7.2_0 build fails (wrong libgwenhywfar library version) ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: aqbanking 3.7.2_0 | ----------------------------------+----------------------------------------- Comment(by vinc17 at macports.org): The /sw/lib is due to gwenhywfar (via $prefix/lib/libgwenhywfar.la). I've reported the bug upstream. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:29:25 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:29:25 -0000 Subject: [MacPorts] #14146: RFE: mysql5: configure --without-server by default In-Reply-To: <055.196ea5f8a2cdf961e32be7664e921332@macports.org> References: <055.196ea5f8a2cdf961e32be7664e921332@macports.org> Message-ID: <064.523f61b3d3f6ff71a3b76d1842cc125d@macports.org> #14146: RFE: mysql5: configure --without-server by default ----------------------------------+----------------------------------------- Reporter: raimue at macports.org | Owner: ryandesign at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: mysql5 | ----------------------------------+----------------------------------------- Changes (by raimue at macports.org): * keywords: mysql5 => * port: => mysql5 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:30:06 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:30:06 -0000 Subject: [MacPorts] #14368: BUG: doxygen +wizard fails to build on Leopard In-Reply-To: <055.3ab3dbead506aa26e6aef98f23043c04@macports.org> References: <055.3ab3dbead506aa26e6aef98f23043c04@macports.org> Message-ID: <064.337a3bbd2d8bbf763cd98e921e8cab81@macports.org> #14368: BUG: doxygen +wizard fails to build on Leopard ----------------------------------+----------------------------------------- Reporter: raimue at macports.org | Owner: css at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: doxygen, doxywizard, leopard Port: doxygen | ----------------------------------+----------------------------------------- Changes (by raimue at macports.org): * port: => doxygen -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:30:22 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:30:22 -0000 Subject: [MacPorts] #15152: BUG: simh: Unexpected *.dSYM In-Reply-To: <055.7077faa474b0fd6757b5c2262b1c4713@macports.org> References: <055.7077faa474b0fd6757b5c2262b1c4713@macports.org> Message-ID: <064.89639139dfc83f8117086d0de8d2b2b4@macports.org> #15152: BUG: simh: Unexpected *.dSYM ----------------------------------+----------------------------------------- Reporter: raimue at macports.org | Owner: gwright at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: simh dsym Port: simh | ----------------------------------+----------------------------------------- Changes (by raimue at macports.org): * port: => simh -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:30:37 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:30:37 -0000 Subject: [MacPorts] #15714: encfs: configure fails In-Reply-To: <055.0399428623d6a9e8a6211856bf5310dc@macports.org> References: <055.0399428623d6a9e8a6211856bf5310dc@macports.org> Message-ID: <064.01ab7420ec951e4acc738aa1a943551d@macports.org> #15714: encfs: configure fails ----------------------------------+----------------------------------------- Reporter: raimue at macports.org | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: Port: encfs | ----------------------------------+----------------------------------------- Changes (by raimue at macports.org): * keywords: encfs => * port: => encfs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:31:02 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:31:02 -0000 Subject: [MacPorts] #15992: nss: Installs too generic binaries In-Reply-To: <055.1b709ff5595073a3d410a578617b43ec@macports.org> References: <055.1b709ff5595073a3d410a578617b43ec@macports.org> Message-ID: <064.3512cfe5b1269f477bcae26d0f9546a7@macports.org> #15992: nss: Installs too generic binaries ----------------------------------+----------------------------------------- Reporter: raimue at macports.org | Owner: reiffert at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: Resolution: | Keywords: nss hunspell conflicts Port: nss | ----------------------------------+----------------------------------------- Changes (by raimue at macports.org): * port: => nss -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:31:33 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:31:33 -0000 Subject: [MacPorts] #16271: e2fsprogs and ossp-uuid conflict on /opt/local/lib/libuuid.a In-Reply-To: <055.48570833a4e0a041a5356cf3c4274121@macports.org> References: <055.48570833a4e0a041a5356cf3c4274121@macports.org> Message-ID: <064.eae63ecddfc35e20c66a40809ee27647@macports.org> #16271: e2fsprogs and ossp-uuid conflict on /opt/local/lib/libuuid.a ----------------------------------+----------------------------------------- Reporter: raimue at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: e2fsprogs ossp-uuid Port: e2fsprogs | ----------------------------------+----------------------------------------- Changes (by raimue at macports.org): * port: => e2fsprogs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:32:50 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:32:50 -0000 Subject: [MacPorts] #15099: [vim-7.1.293+python] wrong Python linked? In-Reply-To: <054.c2d5ba6b8dcef10d0cf088618babc99b@macports.org> References: <054.c2d5ba6b8dcef10d0cf088618babc99b@macports.org> Message-ID: <063.0f0182ce0db5b19204296b85091c743d@macports.org> #15099: [vim-7.1.293+python] wrong Python linked? ---------------------------------+------------------------------------------ Reporter: frodwith at gmail.com | Owner: raimue at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: vim vim-app | ---------------------------------+------------------------------------------ Changes (by raimue at macports.org): * port: => vim vim-app -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:33:20 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:33:20 -0000 Subject: [MacPorts] #16115: vim-app 7.1.330 does not receive Ctrl-^ In-Reply-To: <050.b821c33b9b3ca6261183cbf695422e54@macports.org> References: <050.b821c33b9b3ca6261183cbf695422e54@macports.org> Message-ID: <059.e5cc4c06a30db24e34d10d63259d687c@macports.org> #16115: vim-app 7.1.330 does not receive Ctrl-^ -----------------------------+---------------------------------------------- Reporter: pub1 at panter.ch | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: vim-app | -----------------------------+---------------------------------------------- Changes (by raimue at macports.org): * port: => vim-app -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:34:00 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:34:00 -0000 Subject: [MacPorts] #16154: vim +tcl build fails, tclArch.h missing In-Reply-To: <064.6191e13880fee5cb2133e723dd265aa3@macports.org> References: <064.6191e13880fee5cb2133e723dd265aa3@macports.org> Message-ID: <073.856d7a7f9ff4995978abc3707c578664@macports.org> #16154: vim +tcl build fails, tclArch.h missing -------------------------------------------+-------------------------------- Reporter: darren.weber.lists at gmail.com | Owner: raimue at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: vim | -------------------------------------------+-------------------------------- Changes (by raimue at macports.org): * keywords: vim => * port: => vim Old description: > Problem seems to be: > i686-apple-darwin9-gcc-4.0.1: tclArch.h: No such file or directory > > Debug verbose build log: > {{{ > elegans:~ root# port -dv install vim +huge +perl +python +ruby +tcl > +cscope > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/editors/vim > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/editors/vim > DEBUG: Requested variant darwin is not provided by port vim. > DEBUG: Requested variant i386 is not provided by port vim. > DEBUG: Requested variant macosx is not provided by port vim. > DEBUG: Executing variant huge provides huge > DEBUG: Executing variant perl provides perl > DEBUG: Executing variant python provides python > DEBUG: Executing variant ruby provides ruby > DEBUG: Executing variant tcl provides tcl > DEBUG: Executing variant cscope provides cscope > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses > DEBUG: Requested variant darwin is not provided by port ncurses. > DEBUG: Requested variant cscope is not provided by port ncurses. > DEBUG: Requested variant huge is not provided by port ncurses. > DEBUG: Requested variant i386 is not provided by port ncurses. > DEBUG: Requested variant ruby is not provided by port ncurses. > DEBUG: Requested variant python is not provided by port ncurses. > DEBUG: Requested variant macosx is not provided by port ncurses. > DEBUG: Requested variant tcl is not provided by port ncurses. > DEBUG: Requested variant perl is not provided by port ncurses. > DEBUG: Searching for dependency: ncurses > DEBUG: Found Dependency: receipt exists for ncurses > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv > DEBUG: Requested variant darwin is not provided by port libiconv. > DEBUG: Requested variant cscope is not provided by port libiconv. > DEBUG: Requested variant huge is not provided by port libiconv. > DEBUG: Requested variant i386 is not provided by port libiconv. > DEBUG: Requested variant ruby is not provided by port libiconv. > DEBUG: Requested variant python is not provided by port libiconv. > DEBUG: Requested variant macosx is not provided by port libiconv. > DEBUG: Requested variant tcl is not provided by port libiconv. > DEBUG: Requested variant perl is not provided by port libiconv. > DEBUG: Searching for dependency: libiconv > DEBUG: Found Dependency: receipt exists for libiconv > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ctags > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ctags > DEBUG: Requested variant darwin is not provided by port ctags. > DEBUG: Requested variant cscope is not provided by port ctags. > DEBUG: Requested variant huge is not provided by port ctags. > DEBUG: Requested variant i386 is not provided by port ctags. > DEBUG: Requested variant ruby is not provided by port ctags. > DEBUG: Requested variant python is not provided by port ctags. > DEBUG: Requested variant macosx is not provided by port ctags. > DEBUG: Requested variant tcl is not provided by port ctags. > DEBUG: Requested variant perl is not provided by port ctags. > DEBUG: Searching for dependency: ctags > DEBUG: Found Dependency: receipt exists for ctags > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 > DEBUG: Requested variant cscope is not provided by port perl5.8. > DEBUG: Requested variant huge is not provided by port perl5.8. > DEBUG: Requested variant i386 is not provided by port perl5.8. > DEBUG: Requested variant ruby is not provided by port perl5.8. > DEBUG: Requested variant python is not provided by port perl5.8. > DEBUG: Requested variant macosx is not provided by port perl5.8. > DEBUG: Requested variant tcl is not provided by port perl5.8. > DEBUG: Requested variant perl is not provided by port perl5.8. > DEBUG: Executing variant darwin provides darwin > DEBUG: Executing variant darwin_9 provides darwin_9 > DEBUG: Searching for dependency: perl5.8 > DEBUG: Found Dependency: receipt exists for perl5.8 > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 > DEBUG: Requested variant darwin is not provided by port python25. > DEBUG: Requested variant cscope is not provided by port python25. > DEBUG: Requested variant huge is not provided by port python25. > DEBUG: Requested variant i386 is not provided by port python25. > DEBUG: Requested variant ruby is not provided by port python25. > DEBUG: Requested variant python is not provided by port python25. > DEBUG: Requested variant macosx is not provided by port python25. > DEBUG: Requested variant tcl is not provided by port python25. > DEBUG: Requested variant perl is not provided by port python25. > DEBUG: Executing variant darwin_9 provides darwin_9 > DEBUG: Searching for dependency: python25 > DEBUG: Found Dependency: receipt exists for python25 > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ruby > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ruby > DEBUG: Requested variant cscope is not provided by port ruby. > DEBUG: Requested variant huge is not provided by port ruby. > DEBUG: Requested variant i386 is not provided by port ruby. > DEBUG: Requested variant ruby is not provided by port ruby. > DEBUG: Requested variant python is not provided by port ruby. > DEBUG: Requested variant macosx is not provided by port ruby. > DEBUG: Requested variant tcl is not provided by port ruby. > DEBUG: Requested variant perl is not provided by port ruby. > DEBUG: Executing variant darwin provides darwin > DEBUG: Executing variant thread_hooks provides thread_hooks > DEBUG: Searching for dependency: ruby > DEBUG: Found Dependency: receipt exists for ruby > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl > DEBUG: Requested variant darwin is not provided by port tcl. > DEBUG: Requested variant cscope is not provided by port tcl. > DEBUG: Requested variant huge is not provided by port tcl. > DEBUG: Requested variant i386 is not provided by port tcl. > DEBUG: Requested variant ruby is not provided by port tcl. > DEBUG: Requested variant python is not provided by port tcl. > DEBUG: Requested variant macosx is not provided by port tcl. > DEBUG: Requested variant tcl is not provided by port tcl. > DEBUG: Requested variant perl is not provided by port tcl. > DEBUG: Searching for dependency: tcl > DEBUG: Found Dependency: receipt exists for tcl > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gnutar > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gnutar > DEBUG: Requested variant darwin is not provided by port gnutar. > DEBUG: Requested variant cscope is not provided by port gnutar. > DEBUG: Requested variant huge is not provided by port gnutar. > DEBUG: Requested variant i386 is not provided by port gnutar. > DEBUG: Requested variant ruby is not provided by port gnutar. > DEBUG: Requested variant python is not provided by port gnutar. > DEBUG: Requested variant macosx is not provided by port gnutar. > DEBUG: Requested variant tcl is not provided by port gnutar. > DEBUG: Requested variant perl is not provided by port gnutar. > DEBUG: Executing variant darwin_9 provides darwin_9 > DEBUG: Searching for dependency: gnutar > DEBUG: Didn't find receipt, going to depspec regex for: gnutar > DEBUG: Found Dependency: path: /usr/bin filename: gnutar regex: ^gnutar$ > DEBUG: Found port in > file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/grep > DEBUG: Changing to port directory: > /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/grep > DEBUG: Requested variant darwin is not provided by port grep. > DEBUG: Requested variant cscope is not provided by port grep. > DEBUG: Requested variant huge is not provided by port grep. > DEBUG: Requested variant i386 is not provided by port grep. > DEBUG: Requested variant ruby is not provided by port grep. > DEBUG: Requested variant python is not provided by port grep. > DEBUG: Requested variant macosx is not provided by port grep. > DEBUG: Requested variant tcl is not provided by port grep. > DEBUG: Requested variant perl is not provided by port grep. > DEBUG: Searching for dependency: grep > DEBUG: Didn't find receipt, going to depspec regex for: grep > DEBUG: Found Dependency: path: /usr/bin filename: grep regex: ^grep$ > DEBUG: Skipping completed org.macports.main (vim) > DEBUG: Skipping completed org.macports.fetch (vim) > DEBUG: Skipping completed org.macports.checksum (vim) > DEBUG: setting option extract.cmd to /usr/bin/bzip2 > DEBUG: Skipping completed org.macports.extract (vim) > DEBUG: Skipping completed org.macports.patch (vim) > DEBUG: Skipping completed org.macports.configure (vim) > ---> Building vim with target all > DEBUG: Executing org.macports.build (vim) > DEBUG: Environment: > DEBUG: port allows a parallel build > DEBUG: port allows a parallel build > DEBUG: Assembled command: 'cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_editors_vim/work/vim71" > && make all' > Starting make in the src directory. > If there are problems, cd to the src directory and run make there > cd src && make all > /usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H -I/opt/local/include > -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/FlatCarbon -O > -I/opt/local/include -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing > -I/usr/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.8.8 > /darwin-2level/CORE > -I/System/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 > -I/System/Library/Frameworks/Tcl.framework/Headers -D_REENTRANT=1 > -D_THREAD_SAFE=1 tclArch.h -I/opt/local/lib/ruby/1.8/i686-darwin9 -o > objects/charset.o charset.c > i686-apple-darwin9-gcc-4.0.1: tclArch.h: No such file or directory > In file included from vim.h:304, > from charset.c:10: > os_mac.h:221:1: warning: "MAXPATHL" redefined > In file included from vim.h:242, > from charset.c:10: > os_unix.h:438:1: warning: this is the location of the previous definition > make[1]: *** [objects/charset.o] Error 1 > make: *** [all] Error 2 > Error: Target org.macports.build returned: shell command " cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_editors_vim/work/vim71" > && make all " returned error 2 > Command output: Starting make in the src directory. > If there are problems, cd to the src directory and run make there > cd src && make all > /usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H -I/opt/local/include > -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/FlatCarbon -O > -I/opt/local/include -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing > -I/usr/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.8.8 > /darwin-2level/CORE > -I/System/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 > -I/System/Library/Frameworks/Tcl.framework/Headers -D_REENTRANT=1 > -D_THREAD_SAFE=1 tclArch.h -I/opt/local/lib/ruby/1.8/i686-darwin9 -o > objects/charset.o charset.c > i686-apple-darwin9-gcc-4.0.1: tclArch.h: No such file or directory > In file included from vim.h:304, > from charset.c:10: > os_mac.h:221:1: warning: "MAXPATHL" redefined > In file included from vim.h:242, > from charset.c:10: > os_unix.h:438:1: warning: this is the location of the previous definition > make[1]: *** [objects/charset.o] Error 1 > make: *** [all] Error 2 > > Warning: the following items did not execute (for vim): > org.macports.activate org.macports.build org.macports.destroot > org.macports.install > Error: Status 1 encountered during processing. > elegans:~ root# > }}} New description: Problem seems to be: i686-apple-darwin9-gcc-4.0.1: tclArch.h: No such file or directory Debug verbose build log: {{{ elegans:~ root# port -dv install vim +huge +perl +python +ruby +tcl +cscope DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/editors/vim DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/editors/vim DEBUG: Requested variant darwin is not provided by port vim. DEBUG: Requested variant i386 is not provided by port vim. DEBUG: Requested variant macosx is not provided by port vim. DEBUG: Executing variant huge provides huge DEBUG: Executing variant perl provides perl DEBUG: Executing variant python provides python DEBUG: Executing variant ruby provides ruby DEBUG: Executing variant tcl provides tcl DEBUG: Executing variant cscope provides cscope DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant cscope is not provided by port ncurses. DEBUG: Requested variant huge is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant ruby is not provided by port ncurses. DEBUG: Requested variant python is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Requested variant tcl is not provided by port ncurses. DEBUG: Requested variant perl is not provided by port ncurses. DEBUG: Searching for dependency: ncurses DEBUG: Found Dependency: receipt exists for ncurses DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant cscope is not provided by port libiconv. DEBUG: Requested variant huge is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant ruby is not provided by port libiconv. DEBUG: Requested variant python is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Requested variant tcl is not provided by port libiconv. DEBUG: Requested variant perl is not provided by port libiconv. DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ctags DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ctags DEBUG: Requested variant darwin is not provided by port ctags. DEBUG: Requested variant cscope is not provided by port ctags. DEBUG: Requested variant huge is not provided by port ctags. DEBUG: Requested variant i386 is not provided by port ctags. DEBUG: Requested variant ruby is not provided by port ctags. DEBUG: Requested variant python is not provided by port ctags. DEBUG: Requested variant macosx is not provided by port ctags. DEBUG: Requested variant tcl is not provided by port ctags. DEBUG: Requested variant perl is not provided by port ctags. DEBUG: Searching for dependency: ctags DEBUG: Found Dependency: receipt exists for ctags DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: Requested variant cscope is not provided by port perl5.8. DEBUG: Requested variant huge is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant ruby is not provided by port perl5.8. DEBUG: Requested variant python is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: Requested variant tcl is not provided by port perl5.8. DEBUG: Requested variant perl is not provided by port perl5.8. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Searching for dependency: perl5.8 DEBUG: Found Dependency: receipt exists for perl5.8 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 DEBUG: Requested variant darwin is not provided by port python25. DEBUG: Requested variant cscope is not provided by port python25. DEBUG: Requested variant huge is not provided by port python25. DEBUG: Requested variant i386 is not provided by port python25. DEBUG: Requested variant ruby is not provided by port python25. DEBUG: Requested variant python is not provided by port python25. DEBUG: Requested variant macosx is not provided by port python25. DEBUG: Requested variant tcl is not provided by port python25. DEBUG: Requested variant perl is not provided by port python25. DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Searching for dependency: python25 DEBUG: Found Dependency: receipt exists for python25 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ruby DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ruby DEBUG: Requested variant cscope is not provided by port ruby. DEBUG: Requested variant huge is not provided by port ruby. DEBUG: Requested variant i386 is not provided by port ruby. DEBUG: Requested variant ruby is not provided by port ruby. DEBUG: Requested variant python is not provided by port ruby. DEBUG: Requested variant macosx is not provided by port ruby. DEBUG: Requested variant tcl is not provided by port ruby. DEBUG: Requested variant perl is not provided by port ruby. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant thread_hooks provides thread_hooks DEBUG: Searching for dependency: ruby DEBUG: Found Dependency: receipt exists for ruby DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: Requested variant darwin is not provided by port tcl. DEBUG: Requested variant cscope is not provided by port tcl. DEBUG: Requested variant huge is not provided by port tcl. DEBUG: Requested variant i386 is not provided by port tcl. DEBUG: Requested variant ruby is not provided by port tcl. DEBUG: Requested variant python is not provided by port tcl. DEBUG: Requested variant macosx is not provided by port tcl. DEBUG: Requested variant tcl is not provided by port tcl. DEBUG: Requested variant perl is not provided by port tcl. DEBUG: Searching for dependency: tcl DEBUG: Found Dependency: receipt exists for tcl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gnutar DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gnutar DEBUG: Requested variant darwin is not provided by port gnutar. DEBUG: Requested variant cscope is not provided by port gnutar. DEBUG: Requested variant huge is not provided by port gnutar. DEBUG: Requested variant i386 is not provided by port gnutar. DEBUG: Requested variant ruby is not provided by port gnutar. DEBUG: Requested variant python is not provided by port gnutar. DEBUG: Requested variant macosx is not provided by port gnutar. DEBUG: Requested variant tcl is not provided by port gnutar. DEBUG: Requested variant perl is not provided by port gnutar. DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Searching for dependency: gnutar DEBUG: Didn't find receipt, going to depspec regex for: gnutar DEBUG: Found Dependency: path: /usr/bin filename: gnutar regex: ^gnutar$ DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/grep DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/grep DEBUG: Requested variant darwin is not provided by port grep. DEBUG: Requested variant cscope is not provided by port grep. DEBUG: Requested variant huge is not provided by port grep. DEBUG: Requested variant i386 is not provided by port grep. DEBUG: Requested variant ruby is not provided by port grep. DEBUG: Requested variant python is not provided by port grep. DEBUG: Requested variant macosx is not provided by port grep. DEBUG: Requested variant tcl is not provided by port grep. DEBUG: Requested variant perl is not provided by port grep. DEBUG: Searching for dependency: grep DEBUG: Didn't find receipt, going to depspec regex for: grep DEBUG: Found Dependency: path: /usr/bin filename: grep regex: ^grep$ DEBUG: Skipping completed org.macports.main (vim) DEBUG: Skipping completed org.macports.fetch (vim) DEBUG: Skipping completed org.macports.checksum (vim) DEBUG: setting option extract.cmd to /usr/bin/bzip2 DEBUG: Skipping completed org.macports.extract (vim) DEBUG: Skipping completed org.macports.patch (vim) DEBUG: Skipping completed org.macports.configure (vim) ---> Building vim with target all DEBUG: Executing org.macports.build (vim) DEBUG: Environment: DEBUG: port allows a parallel build DEBUG: port allows a parallel build DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_editors_vim/work/vim71" && make all' Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make all /usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H -I/opt/local/include -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/FlatCarbon -O -I/opt/local/include -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.8.8 /darwin-2level/CORE -I/System/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/System/Library/Frameworks/Tcl.framework/Headers -D_REENTRANT=1 -D_THREAD_SAFE=1 tclArch.h -I/opt/local/lib/ruby/1.8/i686-darwin9 -o objects/charset.o charset.c i686-apple-darwin9-gcc-4.0.1: tclArch.h: No such file or directory In file included from vim.h:304, from charset.c:10: os_mac.h:221:1: warning: "MAXPATHL" redefined In file included from vim.h:242, from charset.c:10: os_unix.h:438:1: warning: this is the location of the previous definition make[1]: *** [objects/charset.o] Error 1 make: *** [all] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_editors_vim/work/vim71" && make all " returned error 2 Command output: Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make all /usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H -I/opt/local/include -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/FlatCarbon -O -I/opt/local/include -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.8.8 /darwin-2level/CORE -I/System/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/System/Library/Frameworks/Tcl.framework/Headers -D_REENTRANT=1 -D_THREAD_SAFE=1 tclArch.h -I/opt/local/lib/ruby/1.8/i686-darwin9 -o objects/charset.o charset.c i686-apple-darwin9-gcc-4.0.1: tclArch.h: No such file or directory In file included from vim.h:304, from charset.c:10: os_mac.h:221:1: warning: "MAXPATHL" redefined In file included from vim.h:242, from charset.c:10: os_unix.h:438:1: warning: this is the location of the previous definition make[1]: *** [objects/charset.o] Error 1 make: *** [all] Error 2 Warning: the following items did not execute (for vim): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. elegans:~ root# }}} -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:35:20 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:35:20 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.256dd2f10a4bdd166653c6eb82342f17@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by jmr at macports.org): Updated with procs for setting the supported and default python versions. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 18:40:23 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 01:40:23 -0000 Subject: [MacPorts] #16751: spotlightfs still points to obsoleted libfuse In-Reply-To: <055.fa9abf1f4295ae97f49b9cccfb51972b@macports.org> References: <055.fa9abf1f4295ae97f49b9cccfb51972b@macports.org> Message-ID: <064.248f342834750462d55978fee4a7cc94@macports.org> #16751: spotlightfs still points to obsoleted libfuse ----------------------------------+----------------------------------------- Reporter: simon at hitzemann.org | Owner: eridius at macports.org Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: macfuse libfuse Port: spotlightfs | ----------------------------------+----------------------------------------- Changes (by macsforever2000 at macports.org): * cc: eridius at macports.org (removed) * keywords: spotlightfs macfuse libfuse => macfuse libfuse * port: => spotlightfs * owner: macports-tickets at lists.macosforge.org => eridius at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 19:12:29 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 02:12:29 -0000 Subject: [MacPorts] #16753: libglade2-2.6.3 fix XML catalog creation in post-activate Message-ID: <052.b87cbd9fd46d8920cf93ccb410666aa0@macports.org> #16753: libglade2-2.6.3 fix XML catalog creation in post-activate ------------------------------+--------------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: libglade2 ------------------------------+--------------------------------------------- Attaching a simple patch to the gnome/libglade2 port so that it probably creates, when necessary, the XML catalog file in ${prefix}/etc/xml/catalog. See [http://lists.macosforge.org/pipermail/macports- users/2008-September/011688.html issue on -users list] and [http://lists.macosforge.org/pipermail/macports- users/2008-October/011713.html this fix]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 19:21:45 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 02:21:45 -0000 Subject: [MacPorts] #16131: kde4.1 Portfiles In-Reply-To: <052.2beccbb6ec5e648f98e52d997f4ba042@macports.org> References: <052.2beccbb6ec5e648f98e52d997f4ba042@macports.org> Message-ID: <061.e20d176bb6e7c4b2942a951c963c5582@macports.org> #16131: kde4.1 Portfiles -------------------------------+-------------------------------------------- Reporter: iggy at theiggy.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: kde strigi -------------------------------+-------------------------------------------- Comment(by illogical1 at gmail.com): I need somewhere to dump my changes in case they get lost another in another brilliant round of hard drive "purging" (what? it keeps the lappy slim). Soooo ... -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 19:21:54 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 02:21:54 -0000 Subject: [MacPorts] #16753: libglade2-2.6.3 fix XML catalog creation in post-activate In-Reply-To: <052.b87cbd9fd46d8920cf93ccb410666aa0@macports.org> References: <052.b87cbd9fd46d8920cf93ccb410666aa0@macports.org> Message-ID: <061.4d3bd9fd670a5104b4ec1bff1d5d18fa@macports.org> #16753: libglade2-2.6.3 fix XML catalog creation in post-activate -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macsforever2000 at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: libglade2 | -------------------------------+-------------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 19:25:26 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 02:25:26 -0000 Subject: [MacPorts] #16753: libglade2-2.6.3 fix XML catalog creation in post-activate In-Reply-To: <052.b87cbd9fd46d8920cf93ccb410666aa0@macports.org> References: <052.b87cbd9fd46d8920cf93ccb410666aa0@macports.org> Message-ID: <061.7d4083b526bef45814c078116285faa1@macports.org> #16753: libglade2-2.6.3 fix XML catalog creation in post-activate -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: libglade2 | -------------------------------+-------------------------------------------- Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40516. I tested it without a catalog and it creates one. If the catalog exists, it does not change it. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 19:48:24 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 02:48:24 -0000 Subject: [MacPorts] #16753: libglade2-2.6.3 fix XML catalog creation in post-activate In-Reply-To: <052.b87cbd9fd46d8920cf93ccb410666aa0@macports.org> References: <052.b87cbd9fd46d8920cf93ccb410666aa0@macports.org> Message-ID: <061.1e105b74639fcce6fd2d01346dae53b9@macports.org> #16753: libglade2-2.6.3 fix XML catalog creation in post-activate -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macsforever2000 at macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: libglade2 | -------------------------------+-------------------------------------------- Changes (by macsforever2000 at macports.org): * status: closed => reopened * resolution: fixed => Comment: After further testing, if the ${prefix}/etc/xml is missing, it still fails. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 19:50:36 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 02:50:36 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.c436414a1745ed16e415f5816db66307@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by benlight at mac.com): Thanks for the help. Unfourtunatly nothing seem to work. I can't work out what I am doing wrong! I hope this all helps someone else. I am using the very latest Xcode tools could this be a problem? I wanted to make a clean install so I uninstalled Macports, re-installed Macports. Gnucash install failed. I then did the steps outlined in the previous post. Still no joy. Logs below: Uninstalled macports. Installed macports 1.6.0 miranda:~ ben$ sudo port install gnucash {{{---> Activating libglade2 2.6.3_0 Error: Target org.macports.activate returned: shell command "xmlcatalog --noout --add system http://glade.gnome.org/glade-2.0.dtd /opt/local/share/xml/libglade/glade-2.0.dtd /opt/local/etc/xml/catalog" returned error 2 Command output: could not open /opt/local/etc/xml/catalog for saving add command failed Error: The following dependencies failed to build: aqbanking3 libglade2 libofx opensp libtool automake autoconf help2man p5-locale-gettext m4 qt3 evince audiofile dbus dbus-glib esound gconf orbit2 libidl gdk-pixbuf glib1 gtk1 gnome-doc-utils docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook- xsl iso-codes py25-hashlib openssl libxslt py25-gobject py25-libxml2 py25-numeric rarian getopt gnome-icon-theme hicolor-icon-theme icon- naming-utils p5-xml-simple p5-xml-namespacesupport p5-xml-sax gnome- keyring gnome-vfs desktop-file-utils popt gnome-mime-data libart_lgpl libgnome libbonobo libgnomecanvas libgnomeui libbonoboui nautilus eel gnome-desktop gnome-themes gtk-engines2 gvfs libsoup py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-nose py25-setuptools py25-zlib py25-orbit startup-notification gnome-menus librsvg libcroco libgsf bzip2 libexif poppler poppler-data goffice guile16 libgnomeprintui libgnomeprint bison libgnomecups libgtkhtml3 enchant p5-finance-quote p5-crypt-ssleay p5 -libwww-perl p5-compress-zlib p5-compress-raw-zlib p5-io-compress-base p5 -io-compress-zlib p5-html-parser p5-html-tagset p5-uri p5-datemanip p5 -html-tableextract slib slib-guile16 Error: Status 1 encountered during processing.}}} Next attempt: miranda:~ ben$ sudo port -pf uninstall gnucash aqbanking aqbanking3 gwenhywfar gwenhywfar3 Password: {{{Error: port uninstall failed: Registry error: gnucash not registered as installed. Error: port uninstall failed: Registry error: aqbanking not registered as installed. Error: port uninstall failed: Registry error: aqbanking3 not registered as installed. Error: port uninstall failed: Registry error: gwenhywfar not registered as installed. ---> Deactivating gwenhywfar3 3.4.1_0 ---> Uninstalling gwenhywfar3 3.4.1_0}}} miranda:~ ben$ sudo port clean gnucash aqbanking aqbanking3 gwenhywfar gwenhywfar3 {{{---> Cleaning gnucash ---> Cleaning aqbanking ---> Cleaning aqbanking3 ---> Cleaning gwenhywfar ---> Cleaning gwenhywfar3}}} miranda:~ ben$ sudo port install gnucash---> Fetching gwenhywfar3 {{{---> Verifying checksum(s) for gwenhywfar3 ---> Extracting gwenhywfar3 ---> Configuring gwenhywfar3 ---> Building gwenhywfar3 with target all ---> Staging gwenhywfar3 into destroot ---> Installing gwenhywfar3 3.4.1_0 ---> Activating gwenhywfar3 3.4.1_0 ---> Cleaning gwenhywfar3 ---> Fetching opensp ---> Attempting to fetch OpenSP-1.5.2.tar.gz from http://downloads.sourceforge.net/openjade ---> Verifying checksum(s) for opensp ---> Extracting opensp ---> Configuring opensp ---> Building opensp with target all ---> Staging opensp into destroot ---> Installing opensp 1.5.2_0 ---> Activating opensp 1.5.2_0 ---> Cleaning opensp ---> Fetching libofx ---> Attempting to fetch libofx-0.8.3.tar.gz from http://downloads.sourceforge.net/libofx ---> Attempting to fetch libofx-0.8.3.tar.gz from http://easynews.dl.sourceforge.net/libofx ---> Verifying checksum(s) for libofx ---> Extracting libofx ---> Configuring libofx ---> Building libofx with target all ---> Staging libofx into destroot ---> Installing libofx 0.8.3_0 ---> Activating libofx 0.8.3_0 ---> Cleaning libofx ---> Fetching p5-locale-gettext ---> Attempting to fetch gettext-1.05.tar.gz from http://ftp.ucr.ac.cr/Unix/CPAN/modules/by-module/Locale ---> Verifying checksum(s) for p5-locale-gettext ---> Extracting p5-locale-gettext ---> Configuring p5-locale-gettext ---> Building p5-locale-gettext with target all ---> Staging p5-locale-gettext into destroot ---> Installing p5-locale-gettext 1.05_0 ---> Activating p5-locale-gettext 1.05_0 ---> Cleaning p5-locale-gettext ---> Fetching help2man ---> Attempting to fetch help2man-1.36.4.tar.gz from http://ftp.gnu.org/gnu/help2man ---> Verifying checksum(s) for help2man ---> Extracting help2man ---> Applying patches to help2man ---> Configuring help2man ---> Building help2man with target all ---> Staging help2man into destroot ---> Installing help2man 1.36.4_1 ---> Activating help2man 1.36.4_1 ---> Cleaning help2man ---> Fetching m4 ---> Attempting to fetch m4-1.4.11.tar.bz2 from http://ftp.gnu.org/gnu/m4 ---> Verifying checksum(s) for m4 ---> Extracting m4 ---> Configuring m4 ---> Building m4 with target all ---> Staging m4 into destroot ---> Installing m4 1.4.11_0 ---> Activating m4 1.4.11_0 ---> Cleaning m4 ---> Fetching autoconf ---> Attempting to fetch autoconf-2.62.tar.bz2 from http://ftp.gnu.org/gnu/autoconf ---> Verifying checksum(s) for autoconf ---> Extracting autoconf ---> Configuring autoconf ---> Building autoconf with target all ---> Staging autoconf into destroot ---> Installing autoconf 2.62_0 ---> Activating autoconf 2.62_0 ---> Cleaning autoconf ---> Fetching automake ---> Attempting to fetch automake-1.10.1.tar.bz2 from http://ftp.gnu.org/gnu/automake ---> Verifying checksum(s) for automake ---> Extracting automake ---> Configuring automake ---> Building automake with target all ---> Staging automake into destroot ---> Installing automake 1.10.1_0 ---> Activating automake 1.10.1_0 ---> Cleaning automake ---> Fetching libtool ---> Attempting to fetch libtool-1.5.26.tar.gz from http://ftp.gnu.org/gnu/libtool ---> Verifying checksum(s) for libtool ---> Extracting libtool ---> Applying patches to libtool ---> Configuring libtool ---> Building libtool with target all ---> Staging libtool into destroot ---> Installing libtool 1.5.26_0 ---> Activating libtool 1.5.26_0 ---> Cleaning libtool ---> Fetching qt3 ---> Attempting to fetch qt-x11-free-3.3.8.tar.bz2 from ftp://ftp.trolltech.com/qt/source/ ---> Attempting to fetch qt-upstream-patches-0004.tar.bz2 from http://ranger.befunk.com/fink/ ---> Verifying checksum(s) for qt3 ---> Extracting qt3 ---> Configuring qt3 ---> Building qt3 with target all ---> Staging qt3 into destroot ---> Installing qt3 3.3.8_3+darwin_9 ---> Activating qt3 3.3.8_3+darwin_9 Before using qt3 (qmake), please make sure to set environment variable QTDIR. QTDIR=/opt/local/lib/qt3; export QTDIR ---> Cleaning qt3 ---> Fetching aqbanking3 ---> Attempting to fetch aqbanking-3.7.2.tar.gz from http://www.aquamaniac.de/sites/download/download.php?package=03&release=17&file=01&dummy=aqbanking-3.7.2.tar.gz ---> Verifying checksum(s) for aqbanking3 ---> Extracting aqbanking3 ---> Configuring aqbanking3 ---> Building aqbanking3 with target all ---> Staging aqbanking3 into destroot ---> Installing aqbanking3 3.7.2_0 ---> Activating aqbanking3 3.7.2_0 ---> Cleaning aqbanking3 ---> Fetching audiofile ---> Attempting to fetch audiofile-0.2.6.tar.gz from http://www.68k.org/~michael/audiofile/ ---> Verifying checksum(s) for audiofile ---> Extracting audiofile ---> Applying patches to audiofile ---> Configuring audiofile ---> Building audiofile with target all ---> Staging audiofile into destroot ---> Installing audiofile 0.2.6_2 ---> Activating audiofile 0.2.6_2 ---> Cleaning audiofile ---> Fetching dbus ---> Attempting to fetch dbus-1.2.3.tar.gz from http://dbus.freedesktop.org/releases/dbus ---> Verifying checksum(s) for dbus ---> Extracting dbus ---> Configuring dbus ---> Building dbus with target all ---> Staging dbus into destroot ---> Creating launchd control script ########################################################### # A startup item has been generated that will aid in # starting dbus with launchd. It is disabled # by default. Execute the following command to start it, # and to cause it to launch at startup: # # sudo launchctl load -w /Library/LaunchDaemons/org.macports.dbus.plist ########################################################### ---> Installing dbus 1.2.3_0 ---> Activating dbus 1.2.3_0 ---> Cleaning dbus ---> Fetching dbus-glib ---> Attempting to fetch dbus-glib-0.76.tar.gz from http://dbus.freedesktop.org/releases/dbus-glib ---> Verifying checksum(s) for dbus-glib ---> Extracting dbus-glib ---> Configuring dbus-glib ---> Building dbus-glib with target all ---> Staging dbus-glib into destroot ---> Installing dbus-glib 0.76_1 ---> Activating dbus-glib 0.76_1 ---> Cleaning dbus-glib ---> Fetching esound ---> Attempting to fetch esound-0.2.40.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/esound/0.2/ ---> Verifying checksum(s) for esound ---> Extracting esound ---> Applying patches to esound ---> Configuring esound ---> Building esound with target all ---> Staging esound into destroot ---> Installing esound 0.2.40_1 ---> Activating esound 0.2.40_1 ---> Cleaning esound ---> Fetching libidl ---> Attempting to fetch libIDL-0.8.11.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/libIDL/0.8/ ---> Verifying checksum(s) for libidl ---> Extracting libidl ---> Applying patches to libidl ---> Configuring libidl ---> Building libidl with target all ---> Staging libidl into destroot ---> Installing libidl 0.8.11_0 ---> Activating libidl 0.8.11_0 ---> Cleaning libidl ---> Fetching orbit2 ---> Attempting to fetch ORBit2-2.14.16.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/ORBit2/2.14/ ---> Verifying checksum(s) for orbit2 ---> Extracting orbit2 ---> Configuring orbit2 ---> Building orbit2 with target all ---> Staging orbit2 into destroot ---> Installing orbit2 2.14.16_0 ---> Activating orbit2 2.14.16_0 ---> Cleaning orbit2 ---> Fetching gconf ---> Attempting to fetch GConf-2.24.0.tar.bz2 from http://mandril.creatis .insa-lyon.fr/linux/gnome.org/sources/GConf/2.24/ ---> Verifying checksum(s) for gconf ---> Extracting gconf ---> Configuring gconf ---> Building gconf with target all ---> Staging gconf into destroot ---> Installing gconf 2.24.0_0 ---> Activating gconf 2.24.0_0 ---> Cleaning gconf ---> Fetching glib1 ---> Attempting to fetch glib-1.2.10.tar.gz from ftp://ftp.gtk.org/pub/gtk/v1.2/ ---> Attempting to fetch ltconfig13 from http://svn.macports.org/repository/macports/distfiles/lt ---> Attempting to fetch ltmain13 from http://svn.macports.org/repository/macports/distfiles/lt ---> Verifying checksum(s) for glib1 ---> Extracting glib1 ---> Applying patches to glib1 ---> Configuring glib1 ---> Building glib1 with target all ---> Staging glib1 into destroot ---> Installing glib1 1.2.10_5 ---> Activating glib1 1.2.10_5 ---> Cleaning glib1 ---> Fetching gtk1 ---> Attempting to fetch gtk+-1.2.10.tar.gz from ftp://ftp.gtk.org/pub/gtk/v1.2/ ---> Attempting to fetch ltconfig13 from http://svn.macports.org/repository/macports/distfiles/lt ---> Attempting to fetch ltmain13 from http://svn.macports.org/repository/macports/distfiles/lt ---> Verifying checksum(s) for gtk1 ---> Extracting gtk1 ---> Applying patches to gtk1 ---> Configuring gtk1 ---> Building gtk1 with target all ---> Staging gtk1 into destroot ---> Installing gtk1 1.2.10_7 ---> Activating gtk1 1.2.10_7 ---> Cleaning gtk1 ---> Fetching gdk-pixbuf ---> Attempting to fetch gdk-pixbuf-0.22.0.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gdk- pixbuf/0.22 ---> Verifying checksum(s) for gdk-pixbuf ---> Extracting gdk-pixbuf ---> Applying patches to gdk-pixbuf ---> Configuring gdk-pixbuf ---> Building gdk-pixbuf with target all ---> Staging gdk-pixbuf into destroot ---> Installing gdk-pixbuf 0.22.0_1 ---> Activating gdk-pixbuf 0.22.0_1 ---> Cleaning gdk-pixbuf ---> Fetching xmlcatmgr ---> Attempting to fetch xmlcatmgr-2.2.tar.gz from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/ ---> Verifying checksum(s) for xmlcatmgr ---> Extracting xmlcatmgr ---> Configuring xmlcatmgr ---> Building xmlcatmgr with target all ---> Staging xmlcatmgr into destroot ---> Installing xmlcatmgr 2.2_1 ---> Activating xmlcatmgr 2.2_1 ---> Cleaning xmlcatmgr ---> Fetching docbook-xml-4.1.2 ---> Attempting to fetch docbkx412.zip from http://www.oasis- open.org/docbook/xml/4.1.2/ ---> Verifying checksum(s) for docbook-xml-4.1.2 ---> Extracting docbook-xml-4.1.2 ---> Configuring docbook-xml-4.1.2 ---> Building docbook-xml-4.1.2 with target all ---> Staging docbook-xml-4.1.2 into destroot ---> Installing docbook-xml-4.1.2 4.1.2_1 ---> Activating docbook-xml-4.1.2 4.1.2_1 ###################################################################### # As MacPorts does not currently have a post-deactivate hook, # you will need to ensure that you manually remove the catalog # entry for this port when you uninstall it. To do so, run # "xmlcatmgr remove nextCatalog /opt/local/share/xml/docbook/4.1.2/catalog.xml". ###################################################################### ---> Cleaning docbook-xml-4.1.2 ---> Fetching docbook-xml-4.2 ---> Attempting to fetch docbook-xml-4.2.zip from http://www.oasis- open.org/docbook/xml/4.2/ ---> Verifying checksum(s) for docbook-xml-4.2 ---> Extracting docbook-xml-4.2 ---> Configuring docbook-xml-4.2 ---> Building docbook-xml-4.2 with target all ---> Staging docbook-xml-4.2 into destroot ---> Installing docbook-xml-4.2 4.2_0 ---> Activating docbook-xml-4.2 4.2_0 ###################################################################### # As MacPorts does not currently have a post-deactivate hook, # you will need to ensure that you manually remove the catalog # entry for this port when you uninstall it. To do so, run # "xmlcatmgr remove nextCatalog /opt/local/share/xml/docbook/4.2/catalog.xml". ###################################################################### ---> Cleaning docbook-xml-4.2 ---> Fetching docbook-xml-4.3 ---> Attempting to fetch docbook-xml-4.3.zip from http://www.oasis- open.org/docbook/xml/4.3/ ---> Verifying checksum(s) for docbook-xml-4.3 ---> Extracting docbook-xml-4.3 ---> Configuring docbook-xml-4.3 ---> Building docbook-xml-4.3 with target all ---> Staging docbook-xml-4.3 into destroot ---> Installing docbook-xml-4.3 4.3_0 ---> Activating docbook-xml-4.3 4.3_0 ###################################################################### # As MacPorts does not currently have a post-deactivate hook, # you will need to ensure that you manually remove the catalog # entry for this port when you uninstall it. To do so, run # "xmlcatmgr remove nextCatalog /opt/local/share/xml/docbook/4.3/catalog.xml". ###################################################################### ---> Cleaning docbook-xml-4.3 ---> Fetching docbook-xml-4.4 ---> Attempting to fetch docbook-xml-4.4.zip from http://www.oasis- open.org/docbook/xml/4.4/ ---> Verifying checksum(s) for docbook-xml-4.4 ---> Extracting docbook-xml-4.4 ---> Configuring docbook-xml-4.4 ---> Building docbook-xml-4.4 with target all ---> Staging docbook-xml-4.4 into destroot ---> Installing docbook-xml-4.4 4.4_0 ---> Activating docbook-xml-4.4 4.4_0 ###################################################################### # As MacPorts does not currently have a post-deactivate hook, # you will need to ensure that you manually remove the catalog # entry for this port when you uninstall it. To do so, run # "xmlcatmgr remove nextCatalog /opt/local/share/xml/docbook/4.4/catalog.xml". ###################################################################### ---> Cleaning docbook-xml-4.4 ---> Fetching docbook-xml-4.5 ---> Attempting to fetch docbook-xml-4.5.zip from http://www.oasis- open.org/docbook/xml/4.5/ ---> Verifying checksum(s) for docbook-xml-4.5 ---> Extracting docbook-xml-4.5 ---> Configuring docbook-xml-4.5 ---> Building docbook-xml-4.5 with target all ---> Staging docbook-xml-4.5 into destroot ---> Installing docbook-xml-4.5 4.5_0 ---> Activating docbook-xml-4.5 4.5_0 ###################################################################### # As MacPorts does not currently have a post-deactivate hook, # you will need to ensure that you manually remove the catalog # entry for this port when you uninstall it. To do so, run # "xmlcatmgr remove nextCatalog /opt/local/share/xml/docbook/4.5/catalog.xml". ###################################################################### ---> Cleaning docbook-xml-4.5 ---> Fetching docbook-xml ---> Verifying checksum(s) for docbook-xml ---> Extracting docbook-xml ---> Configuring docbook-xml ---> Building docbook-xml with target all ---> Staging docbook-xml into destroot ---> Installing docbook-xml 4.5_1 ---> Activating docbook-xml 4.5_1 ---> Cleaning docbook-xml ---> Fetching docbook-xsl ---> Attempting to fetch docbook-xsl-1.73.2.tar.bz2 from http://downloads.sourceforge.net/docbook ---> Verifying checksum(s) for docbook-xsl ---> Extracting docbook-xsl ---> Configuring docbook-xsl ---> Building docbook-xsl with target all ---> Staging docbook-xsl into destroot ---> Installing docbook-xsl 1.73.2_0 ---> Activating docbook-xsl 1.73.2_0 ###################################################################### # As MacPorts does not currently have a post-deactivate hook, # you will need to ensure that you manually remove the catalog # entry for this port when you uninstall it. To do so, run # "xmlcatmgr remove nextCatalog /opt/local/share/xsl/docbook- xsl/catalog.xml". ###################################################################### ---> Cleaning docbook-xsl ---> Fetching openssl ---> Attempting to fetch openssl-0.9.8i.tar.gz from http://www.openssl.org/source/ ---> Verifying checksum(s) for openssl ---> Extracting openssl ---> Applying patches to openssl ---> Configuring openssl ---> Building openssl with target all ---> Staging openssl into destroot ---> Installing openssl 0.9.8i_0 ---> Activating openssl 0.9.8i_0 ---> Cleaning openssl ---> Fetching py25-hashlib ---> Attempting to fetch Python-2.5.2.tar.bz2 from http://www.python.org/ftp/python/2.5.2/ ---> Verifying checksum(s) for py25-hashlib ---> Extracting py25-hashlib ---> Configuring py25-hashlib ---> Building py25-hashlib with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-hashlib/work/Python-2.5.2/Modules" && /opt/local/bin/python2.5 setup.py build " returned error 1 Command output: running build running build_ext building '_hashlib' extension creating build creating build/temp.macosx-10.3-i386-2.5 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -I/opt/local/include -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -c _hashopenssl.c -o build/temp.macosx-10.3-i386-2.5/_hashopenssl.o unable to execute -DNDEBUG: No such file or directory error: command '-DNDEBUG' failed with exit status 1 Error: The following dependencies failed to build: evince gnome-doc-utils iso-codes py25-hashlib libxslt py25-gobject py25-libxml2 py25-numeric rarian getopt gnome-icon-theme hicolor-icon-theme icon-naming-utils p5 -xml-simple p5-xml-namespacesupport p5-xml-sax gnome-keyring gnome-vfs desktop-file-utils popt gnome-mime-data libart_lgpl libgnome libbonobo libgnomecanvas libgnomeui libbonoboui nautilus eel gnome-desktop gnome- themes gtk-engines2 gvfs libsoup py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-nose py25-setuptools py25-zlib py25-orbit startup-notification gnome-menus librsvg libcroco libgsf bzip2 libexif poppler poppler-data goffice guile16 libgnomeprintui libgnomeprint bison libgnomecups libgtkhtml3 enchant p5-finance-quote p5-crypt-ssleay p5-libwww-perl p5 -compress-zlib p5-compress-raw-zlib p5-io-compress-base p5-io-compress- zlib p5-html-parser p5-html-tagset p5-uri p5-datemanip p5-html- tableextract slib slib-guile16 Error: Status 1 encountered during processing.}}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 20:17:42 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 03:17:42 -0000 Subject: [MacPorts] #16754: libxml2-2.7.1 create ${prefix}/etc/xml Message-ID: <052.ba95b00a9460cba4b41e6267d209e124@macports.org> #16754: libxml2-2.7.1 create ${prefix}/etc/xml ------------------------------+--------------------------------------------- Reporter: blb at macports.org | Owner: cedric.luthi at gmail.com Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: libxml2 ------------------------------+--------------------------------------------- Attaching a patch to textproc/libxml2 to create ${prefix}/etc/xml as that is the location used for (at least) the XML catalog. This needs to exist for xmlcatalog to create the catalog file itself (see, eg, #16753). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 20:18:41 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 03:18:41 -0000 Subject: [MacPorts] #16753: libglade2-2.6.3 fix XML catalog creation in post-activate In-Reply-To: <052.b87cbd9fd46d8920cf93ccb410666aa0@macports.org> References: <052.b87cbd9fd46d8920cf93ccb410666aa0@macports.org> Message-ID: <061.fbdd411ddbf743a7081cfb9ffab02370@macports.org> #16753: libglade2-2.6.3 fix XML catalog creation in post-activate -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: libglade2 | -------------------------------+-------------------------------------------- Changes (by blb at macports.org): * status: reopened => closed * resolution: => fixed Comment: That will be handled with libxml2, ticket #16754. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 20:23:59 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 03:23:59 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.5d807164f960b04299d7f85ac216238a@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by macsforever2000 at macports.org): Please try exactly the following: {{{ sudo port selfupdate sudo port uninstall -pf aqbanking3 gwenhywfar3 sudo port clean py25-hashlib sudo port install gnucash }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 20:45:28 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 03:45:28 -0000 Subject: [MacPorts] #16258: RFE: py25-hashlib does not need to download a new distfile In-Reply-To: <057.5ebb9100d742a4846ef9d38e46b72ab9@macports.org> References: <057.5ebb9100d742a4846ef9d38e46b72ab9@macports.org> Message-ID: <066.f54e4eed7c75d5eb0e9eaab1c62c26e9@macports.org> #16258: RFE: py25-hashlib does not need to download a new distfile ------------------------------------+--------------------------------------- Reporter: mcalhoun at macports.org | Owner: mww at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: py25-hashlib | ------------------------------------+--------------------------------------- Changes (by macsforever2000 at macports.org): * cc: mww at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => mww at macports.org * port: => py25-hashlib -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 20:57:13 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 03:57:13 -0000 Subject: [MacPorts] #16111: python25-2.5.2 builds differing dylib and framework libraries In-Reply-To: <052.edfe39d9be496496a111fa500a9e4102@macports.org> References: <052.edfe39d9be496496a111fa500a9e4102@macports.org> Message-ID: <061.07d3efdb8af4af5b199e5b41c3396f1b@macports.org> #16111: python25-2.5.2 builds differing dylib and framework libraries -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: python24 python30 framework Port: python25 | -------------------------------+-------------------------------------------- Changes (by blb at macports.org): * keywords: python25 python24 python30 framework => python24 python30 framework * port: => python25 Comment: Looks like the first set was a bit overzealous on creating ${prefix}/lib symlinks; attaching a new patch (rooted in dports/lang/python25) to update Portfile and files/patch-Makefile.pre.in.diff again, only creating libpython${branch}.dylib. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 21:04:21 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 04:04:21 -0000 Subject: [MacPorts] #16258: RFE: py25-hashlib does not need to download a new distfile In-Reply-To: <057.5ebb9100d742a4846ef9d38e46b72ab9@macports.org> References: <057.5ebb9100d742a4846ef9d38e46b72ab9@macports.org> Message-ID: <066.90950a249aa0a4abab00b23218488185@macports.org> #16258: RFE: py25-hashlib does not need to download a new distfile ------------------------------------+--------------------------------------- Reporter: mcalhoun at macports.org | Owner: mww at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: py25-hashlib | ------------------------------------+--------------------------------------- Changes (by blb at macports.org): * status: new => closed * resolution: => fixed Comment: Looks like raimue@ got this in r37817 (switching back to tgz for python25). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 4 21:05:45 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 04:05:45 -0000 Subject: [MacPorts] #16684: Portfile for project 'ledger', a command-line accounting tool In-Reply-To: <054.09a75578ba4e119fc3abce46ff731262@macports.org> References: <054.09a75578ba4e119fc3abce46ff731262@macports.org> Message-ID: <063.04e94603cd5e7e37edcb606658f6bbac@macports.org> #16684: Portfile for project 'ledger', a command-line accounting tool ---------------------------------+------------------------------------------ Reporter: jwiegley at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: ledger | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * status: new => closed * resolution: => fixed Comment: Committed revision r40519. I went with finance which was recently added as a primary category. Thanks for the contribution! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 01:23:58 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 08:23:58 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.f63bdc0c6b19b21005c410a691ad9a8d@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): Tested and verified on Mac OSX Leopard 10.5.5 intel 123 dependent ports were installed for gimp 2.6. you should also update gimp.app port as well thanks for the effort -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 01:34:14 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 08:34:14 -0000 Subject: [MacPorts] #11009: NEW: ZendFramework In-Reply-To: <048.9f9e9a80d395d622e1b12b90c7a1c2d4@macports.org> References: <048.9f9e9a80d395d622e1b12b90c7a1c2d4@macports.org> Message-ID: <057.ac4cd7631899fcbc802c3cc1e605b1b8@macports.org> #11009: NEW: ZendFramework ---------------------------+------------------------------------------------ Reporter: alpha at rrs.at | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Low | Milestone: Port Submissions Component: ports | Version: Resolution: | Keywords: ---------------------------+------------------------------------------------ Comment(by myschizobuddy at gmail.com): Current version of zendframework is 1.6 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 01:34:45 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 08:34:45 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.188055ccc2cfd3dad155d180b49c6dee@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by benlight at mac.com): Replying to [comment:5 macsforever2000@?]: > Please try exactly the following: > > {{{ > sudo port selfupdate > sudo port uninstall -pf aqbanking3 gwenhywfar3 > sudo port clean py25-hashlib > sudo port install gnucash > }}} > I tried but failed :-( Sorry this isn't working. Open to all suggestions and willing to help if I can. Please see result below. {{{ miranda:~ ben$ sudo port selfupdate MacPorts base version 1.600 installed Downloaded MacPorts base version 1.600 The MacPorts installation is not outdated and so was not updated selfupdate done! miranda:~ ben$ sudo port uninstall -pf aqbanking3 gwenhywfar3 ---> Deactivating aqbanking3 3.7.2_0 ---> Uninstalling aqbanking3 3.7.2_0 ---> Deactivating gwenhywfar3 3.4.1_0 ---> Uninstalling gwenhywfar3 3.4.1_0 miranda:~ ben$ sudo port clean py25-hashlib ---> Cleaning py25-hashlib miranda:~ ben$ sudo port install gnucash ---> Fetching gwenhywfar ---> Attempting to fetch gwenhywfar-3.4.1.tar.gz from http://www.aquamaniac.de/sites/download/download.php?package=01&release=13&file=01&dummy= ---> Verifying checksum(s) for gwenhywfar ---> Extracting gwenhywfar ---> Configuring gwenhywfar ---> Building gwenhywfar with target all ---> Staging gwenhywfar into destroot ---> Installing gwenhywfar 3.4.1_0 ---> Activating gwenhywfar 3.4.1_0 ---> Cleaning gwenhywfar ---> Fetching aqbanking ---> Attempting to fetch aqbanking-3.7.2.tar.gz from http://www.aquamaniac.de/sites/download/download.php?package=03&release=17&file=01&dummy=aqbanking-3.7.2.tar.gz ---> Verifying checksum(s) for aqbanking ---> Extracting aqbanking ---> Configuring aqbanking ---> Building aqbanking with target all ---> Staging aqbanking into destroot ---> Installing aqbanking 3.7.2_0 ---> Activating aqbanking 3.7.2_0 ---> Cleaning aqbanking ---> Fetching py25-hashlib ---> Verifying checksum(s) for py25-hashlib ---> Extracting py25-hashlib ---> Configuring py25-hashlib ---> Building py25-hashlib with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-hashlib/work/Python-2.5.2/Modules" && /opt/local/bin/python2.5 setup.py build " returned error 1 Command output: running build running build_ext building '_hashlib' extension creating build creating build/temp.macosx-10.3-i386-2.5 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -I/opt/local/include -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -c _hashopenssl.c -o build/temp.macosx-10.3-i386-2.5/_hashopenssl.o unable to execute -DNDEBUG: No such file or directory error: command '-DNDEBUG' failed with exit status 1 Error: The following dependencies failed to build: evince gnome-doc-utils iso-codes py25-hashlib libxslt py25-gobject py25-libxml2 py25-numeric rarian getopt gnome-icon-theme hicolor-icon-theme icon-naming-utils p5 -xml-simple p5-xml-namespacesupport p5-xml-sax gnome-keyring gnome-vfs desktop-file-utils popt gnome-mime-data libart_lgpl libgnome libbonobo libgnomecanvas libgnomeui libbonoboui nautilus eel gnome-desktop gnome- themes gtk-engines2 gvfs libsoup py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-nose py25-setuptools py25-zlib py25-orbit startup-notification gnome-menus librsvg libcroco libgsf bzip2 libexif poppler poppler-data goffice guile16 libgnomeprintui libgnomeprint bison libgnomecups libgtkhtml3 enchant p5-finance-quote p5-crypt-ssleay p5-libwww-perl p5 -compress-zlib p5-compress-raw-zlib p5-io-compress-base p5-io-compress- zlib p5-html-parser p5-html-tagset p5-uri p5-datemanip p5-html- tableextract slib slib-guile16 Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 02:10:10 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 09:10:10 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.77d5d1025790655b3d5b4d27dc0548f2@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by raimue at macports.org): You hit the [wiki:LeopardProblems#environmentvariablesbecomeblankbetweenconfigureandbuildphases Tcl environment bug on Leopard]. Workaround: {{{ sudo port clean py25-hashlib sudo port install gnucash }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 02:31:50 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 09:31:50 -0000 Subject: [MacPorts] #16648: lbdb 0.36_0 build error In-Reply-To: <055.ee51e5b7ef7ab281871755717942cdc9@macports.org> References: <055.ee51e5b7ef7ab281871755717942cdc9@macports.org> Message-ID: <064.56036523e0c5756934b9b9deab687c3d@macports.org> #16648: lbdb 0.36_0 build error ----------------------------------+----------------------------------------- Reporter: jrh at theptrgroup.com | Owner: reilles at loria.fr Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: lbdb Port: lbdb | ----------------------------------+----------------------------------------- Comment(by erwan at rail.eu.org): The problem is not in the order : using $(CC) $(CFLAGS) -o $@ $? $(LDFLAGS) $(LIBICONV) still leads to the same error -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 02:48:52 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 09:48:52 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? Message-ID: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? -------------------------------------------------------+-------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gnucash orbit2 gconf dbus orbit dbus-glib | Port: gnucash orbit2 gconf dbus -------------------------------------------------------+-------------------- Ran port updates (PPC): gnucash from 2.2.5_0 to 2.2.7_1; gconf from 2.22.0_0 to 2.24.0_0; orbit2 from 2.14.12_0 to 2.14.16_0; dbus from 1.1.20_1 to 1.2.3_0. Got the following errors, confirmed by two other users; was told it was probably a ORBit/GConf problem, or possibly dbus. Two error windows every time gnucash is launched. One says: "The configuration data used to specify default values for GnuCash cannot be found in the default system locations. Without this data GnuCash will still operate properly but it may require some extra time to setup. Do you wish to setup the configuration data?" The other says: "An error occurred while loading or saving configuration information for gnucash. Some of your configuration settings may not work properly." When I click "Details" on the second window, it says: "Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: dbus- launch failed to autolaunch D-Bus session: Autolaunch requested, but X11 support not compiled in." Gnucash mostly works fine otherwise, but preferences cannot be saved. That is, you can change them and click OK, but they don't actually do anything. Also, other "on-the-fly" preferences don't stick, such as the confirmation window when changing the reconciliation state of transactions. When I select, "don't warn me again", this is not remembered, and the windows will still pop up. Gnucash is also taking a ridiculous amount of CPU power, and is extremely slow, possibly related to locked files? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 03:04:56 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 10:04:56 -0000 Subject: [MacPorts] #16697: XFree86 4.7.0 build failure In-Reply-To: <057.19560b315f2a5fa51256d786536e5bf7@macports.org> References: <057.19560b315f2a5fa51256d786536e5bf7@macports.org> Message-ID: <066.1484b11f25855456412701718688a7e7@macports.org> #16697: XFree86 4.7.0 build failure ------------------------------------+--------------------------------------- Reporter: aladin at puredarwin.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: XFree86, Xtranssock.c, MAXHOSTNAMELEN, decompress.c, z_magic, PureDarwin, haspatch Port: XFree86 | ------------------------------------+--------------------------------------- Changes (by raimue at macports.org): * cc: raimue at macports.org (added) Comment: Are these patches specific to Darwin 9 only, or should they be added for all platforms? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 03:06:56 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 10:06:56 -0000 Subject: [MacPorts] #16756: mediatomb-0.11.0 Configure error: lwres_gethostbyname_r not found Message-ID: <063.71f674c5b295103c8f0a825cfe23b74f@macports.org> #16756: mediatomb-0.11.0 Configure error: lwres_gethostbyname_r not found -----------------------------------------+---------------------------------- Reporter: lorenzo.costanzia at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: lwres, bind, gethostbyname | Port: mediatomb -----------------------------------------+---------------------------------- {{{ configure: You are running OSX, assuming threadsafe gethostbyname version checking how to run the C++ preprocessor... /usr/bin/g++-4.0 -E checking for gethostbyname_r... no checking lwres/netdb.h usability... yes checking lwres/netdb.h presence... yes checking for lwres/netdb.h... yes checking for lwres_gethostbyname_r in -llwres... no configure: error: required library function not found }}} I'm not a developer, but if I interpret the autoconf file correctly (see below), then it does not expect to find lwres/netdb.h on OS X, in which case it would just proceed. But having installed BIND, whose lwres library on darwin seems to lack a function (lwres_gethostbyname_r) found on other systems, it complains. {{{ if test $DARWIN_OS -eq 1 ; then AC_MSG_NOTICE([You are running OSX, assuming threadsafe gethostbyname version]) elif test $CYGWIN_OS -eq 1; then AC_MSG_NOTICE([Your are building under Cygwin, assuming threadsafe gethostbyname implementation]) fi AC_CHECK_FUNCS([gethostbyname_r],[], [ AC_CHECK_HEADERS([lwres/netdb.h], [ AC_CHECK_LIB(lwres, lwres_gethostbyname_r, [ LWRES_LIBS="-llwres" AC_DEFINE(HAVE_LIBLWRES, 1, [lwres library presence]) AC_SUBST(LWRES_LIBS) ], [AC_MSG_ERROR(required library function not found)]) ], [ if ((test $DARWIN_OS -eq 0) && (test $CYGWIN_OS -eq 0) && (test $OPENBSD_OS -eq 0)) ; then AC_MSG_ERROR([required header not found]) fi ]) ]) }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 03:13:47 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 10:13:47 -0000 Subject: [MacPorts] #16748: gnucash-2.2.7 Dependency problem - wrong name In-Reply-To: <063.e621ee5c9f8241ae564ef00bc17abf00@macports.org> References: <063.e621ee5c9f8241ae564ef00bc17abf00@macports.org> Message-ID: <072.01309c0bfd79ca7d97d37fba58c6073d@macports.org> #16748: gnucash-2.2.7 Dependency problem - wrong name ------------------------------------------+--------------------------------- Reporter: lorenzo.costanzia at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: gnucash | ------------------------------------------+--------------------------------- Comment(by lorenzo.costanzia at gmail.com): Yeah, but the committer forgot to edit the other place in the file, line 73. Therefore, it installs aqbanking even with the +without_hbci variant. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 04:33:59 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 11:33:59 -0000 Subject: [MacPorts] #16697: XFree86 4.7.0 build failure In-Reply-To: <057.19560b315f2a5fa51256d786536e5bf7@macports.org> References: <057.19560b315f2a5fa51256d786536e5bf7@macports.org> Message-ID: <066.9e767ff2ef4f2c03c0d8f9d967f19a24@macports.org> #16697: XFree86 4.7.0 build failure ------------------------------------+--------------------------------------- Reporter: aladin at puredarwin.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: XFree86, Xtranssock.c, MAXHOSTNAMELEN, decompress.c, z_magic, PureDarwin, haspatch Port: XFree86 | ------------------------------------+--------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => fixed Comment: Committed in r40523. I concluded that the patches can be added for all platforms as they only add fallbacks. Tested building, but not functionality on Mac OS X 10.5.5. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 04:49:43 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 11:49:43 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.6152bcef29000788b8d1d7b876bf1bb6@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by benlight at mac.com): Replying to [comment:7 raimue@?]: > You hit the [wiki:LeopardProblems#environmentvariablesbecomeblankbetweenconfigureandbuildphases Tcl environment bug on Leopard]. > > Workaround: > {{{ > sudo port clean py25-hashlib > sudo port install gnucash > }}} I believe I tried this already, please see above. Thanks anyway. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 05:05:18 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 12:05:18 -0000 Subject: [MacPorts] #16757: lzo package fails checksum Message-ID: <059.e0b788d2382878fc083b374b5afe2557@macports.org> #16757: lzo package fails checksum -------------------------------------+-------------------------------------- Reporter: rom.velasquez at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------------+-------------------------------------- When trying to install lzo (1.0.8) I get a failed checksum message: ---> Verifying checksum(s) for lzo Error: Checksum (md5) mismatch for lzo-1.08.tar.gz Error: Target org.macports.checksum returned: Unable to verify file checksums Error: Status 1 encountered during processing. Even if I set the checksum.skip=yes option it still fails. The only way I got the package to install correctly was to manually unpack the source package and move it to the work directory and then rerun the install skipping the checksum. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 05:13:35 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 12:13:35 -0000 Subject: [MacPorts] #14421: doxygen-1.5.7: consider no_tex (or lite?) variant In-Reply-To: <052.74d7674c25553a2d329a95d572ae457f@macports.org> References: <052.74d7674c25553a2d329a95d572ae457f@macports.org> Message-ID: <061.97234fd7d243af5f36c7e215df808696@macports.org> #14421: doxygen-1.5.7: consider no_tex (or lite?) variant -------------------------------+-------------------------------------------- Reporter: css at macports.org | Owner: css at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: doxygen | -------------------------------+-------------------------------------------- Comment(by css at macports.org): r40525 fixes a typo in the docs variant. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 05:17:20 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 12:17:20 -0000 Subject: [MacPorts] #16614: Update Doxygen 1.5.5 to 1.5.7 In-Reply-To: <055.e90ba90b82dc202415f28561469d1b34@macports.org> References: <055.e90ba90b82dc202415f28561469d1b34@macports.org> Message-ID: <064.a13a4e4d2d96d36682bd085f87492433@macports.org> #16614: Update Doxygen 1.5.5 to 1.5.7 ----------------------------------+----------------------------------------- Reporter: luis.beca at gmail.com | Owner: css at macports.org Type: enhancement | Status: closed Priority: High | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: doxygen | ----------------------------------+----------------------------------------- Changes (by css at macports.org): * status: reopened => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 06:13:59 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 13:13:59 -0000 Subject: [MacPorts] #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 Message-ID: <054.65e6147a90d5961bdef3ce6f45c7f899@macports.org> #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 --------------------------------+------------------------------------------- Reporter: captsolo at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: --------------------------------+------------------------------------------- This is a feature request for a no_x11 variant of gtk2hs port. There have been reports on mailing lists that people have built gtk2hs from source with the Mac OS X native version of gtk2. This ver of GTK+ is also present in MacPorts as a no_x11 variant of gtk2, however gtk2hs fails to configure if you try to install it after this variant of GTK+. I'll post come comments below on what I tried. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 06:23:41 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 13:23:41 -0000 Subject: [MacPorts] #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 In-Reply-To: <054.65e6147a90d5961bdef3ce6f45c7f899@macports.org> References: <054.65e6147a90d5961bdef3ce6f45c7f899@macports.org> Message-ID: <063.09c92d1f825f12032e818cd4bad590ea@macports.org> #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 ---------------------------------+------------------------------------------ Reporter: captsolo at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ---------------------------------+------------------------------------------ Comment(by captsolo at gmail.com): The first problem is dependency on gtkglext port. It depends on pangox which does not get build in no_x11 variant. There were also reports that gtkglext depends on X11 OpenGL implementation and that it would not work with no_x11 variant w/o rewriting for Apple APIs. I got gtk2hs to compile by disabling some extensions: --disable-svg and --disable-opengl (patch attached). The patch is attached just as an example of what I did. You may want to test of the port works properly after these modifications. And, if it works, a no_x11 variant would need to be added to gtk2hs. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 06:34:34 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 13:34:34 -0000 Subject: [MacPorts] #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 In-Reply-To: <054.65e6147a90d5961bdef3ce6f45c7f899@macports.org> References: <054.65e6147a90d5961bdef3ce6f45c7f899@macports.org> Message-ID: <063.498b343b4d23ac734777e5471ac4526a@macports.org> #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 ---------------------------------+------------------------------------------ Reporter: captsolo at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ---------------------------------+------------------------------------------ Comment(by captsolo at gmail.com): When trying to compile an application (Fenfire) to use the resulting gtk2hs port I get the following error message: {{{ Fenfire/GtkFixes.hs:38:0: Bad interface file: /opt/local/lib/gtk2hs/imports/gtk/Graphics/UI/Gtk.hi Something is amiss; requested module gtk-0.9.12.1:Graphics.UI.Gtk differs from name found in the interface file gtk-0.9.13:Graphics.UI.Gtk }}} Could someone help me fix this? I don't see where it gets an idea that gtk-0.9.12.1 is requested. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 06:45:10 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 13:45:10 -0000 Subject: [MacPorts] #16759: Update file-4.25 to file-4.26 Message-ID: <062.513c4d68b951f0b7825f6cf1512ee8d3@macports.org> #16759: Update file-4.25 to file-4.26 ----------------------------------------+----------------------------------- Reporter: jay-macports at shopwatch.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: file ----------------------------------------+----------------------------------- I'm volunteering myself as maintainer for the "file" port. I've made the following changes for 4.26: - Update Portfile to 4.26 - Simplify the implementation of the with_default_names variant - Rebase the existing lzma patch, and add a note that it's only for a future version of lzma - Add file.h patch from upstream's CVS to fix "duplicate symbol _li" errors when building on Mac -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 06:48:46 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 13:48:46 -0000 Subject: [MacPorts] #16759: Update file-4.25 to file-4.26 In-Reply-To: <062.513c4d68b951f0b7825f6cf1512ee8d3@macports.org> References: <062.513c4d68b951f0b7825f6cf1512ee8d3@macports.org> Message-ID: <071.acb5c27e96b52cf5305c6fb66e5b5cb9@macports.org> #16759: Update file-4.25 to file-4.26 -----------------------------------------+---------------------------------- Reporter: jay-macports at shopwatch.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: file | -----------------------------------------+---------------------------------- Comment(by jay-macports at shopwatch.org): Replying to [ticket:16759 jay-macports@?]: And again with WikiFormatting... I'm volunteering myself as maintainer for the "file" port. I've made the following changes for 4.26: * Update Portfile to 4.26 * Simplify the implementation of the with_default_names variant * Rebase the existing lzma patch, and add a note that it's only for a future version of lzma * Add file.h patch from upstream's CVS to fix "duplicate symbol _li" errors when building on Mac -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 07:00:10 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 14:00:10 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.98f58e44fdb5f24242ddbdedd9415a7d@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by agentyikes at paranormalcop.net): I have tried it too. No luck at all. Seems that this is something general. Any fix? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 08:18:32 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 15:18:32 -0000 Subject: [MacPorts] #16760: Pidgin 2.5.1 fails to compile Message-ID: <051.0d10c9580b9d7b7e71dd25aaa7dbb099@macports.org> #16760: Pidgin 2.5.1 fails to compile -----------------------------+---------------------------------------------- Reporter: tafinho at sapo.pt | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: pidgin compile | Port: Pidgin -----------------------------+---------------------------------------------- Pidgin 2.5.1 fails to compile on a brand new port instalation. log: ---> Building pidgin with target all /bin/sh ./config.status --recheck running CONFIG_SHELL=/bin/sh /bin/sh ./configure --prefix=/opt/local --disable-avahi --disable-consoleui --disable-gstreamer --disable-gtkspell --disable-meanwhile --disable-nm --disable-perl --disable-screensaver --disable-sm --disable-startup-notification --enable-nss --mandir=/opt/local/share/man --with-nspr-includes=/opt/local/include/nspr --with-nspr-libs=/opt/local/lib --with-nss-includes=/opt/local/include/nss --with-nss-libs=/opt/local/lib CC=/usr/bin/gcc-4.0 CFLAGS=-O2 LDFLAGS=-L/opt/local/lib -bind_at_load CPPFLAGS=-I/opt/local/include -no- cpp-precomp CPP=/usr/bin/cpp-4.0 CXX=/usr/bin/g++-4.0 CXXFLAGS=-O2 FFLAGS=-O2 --no-create --no-recursion checking build system type... i386-apple-darwin9.5.0 checking host system type... i386-apple-darwin9.5.0 checking target system type... i386-apple-darwin9.5.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking for sed... /usr/bin/sed checking for gcc... /usr/bin/gcc-4.0 checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.0 accepts -g... yes checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of /usr/bin/gcc-4.0... gcc3 checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together... yes checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -p checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... /usr/bin/cpp-4.0 checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether /usr/bin/g++-4.0 accepts -g... yes checking dependency style of /usr/bin/g++-4.0... gcc3 checking how to run the C++ preprocessor... /usr/bin/g++-4.0 -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common checking if /usr/bin/gcc-4.0 PIC flag -fno-common works... yes checking if /usr/bin/gcc-4.0 static flag -static works... no checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin9.5.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by /usr/bin/g++-4.0... /usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld) supports shared libraries... yes checking for /usr/bin/g++-4.0 option to produce PIC... -fno-common checking if /usr/bin/g++-4.0 PIC flag -fno-common works... yes checking if /usr/bin/g++-4.0 static flag -static works... no checking if /usr/bin/g++-4.0 supports -c -o file.o... yes checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin9.5.0 dyld checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for a BSD-compatible install... /usr/bin/install -c ./configure: line 19796: AC_PROG_INTLTOOL: command not found ./configure: line 19797: PKG_PROG_PKG_CONFIG: command not found checking for working alloca.h... yes checking for alloca... yes checking for res_query in -lresolv... yes checking CoreFoundation/CoreFoundation.h usability... yes checking CoreFoundation/CoreFoundation.h presence... yes checking for CoreFoundation/CoreFoundation.h... yes checking IOKit/IOKitLib.h usability... yes checking IOKit/IOKitLib.h presence... yes checking for IOKit/IOKitLib.h... yes ./configure: line 20521: AM_GLIB_GNU_GETTEXT: command not found configure: error: The msgfmt command is required to build libpurple. If it is installed on your system, ensure that it is in your path. If it is not, install GNU gettext to continue. If you have msgfmt installed, but for some reason this error message is still displayed, you have encountered what appears to be a bug in third-party configure macros. Try setting the MSGFMT environment variable to the absolute path to your msgfmt binary and trying configure again, like this: MSGFMT=/path/to/msgfmt ./configure ... make: *** [config.status] Error 1 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.5.1" && make all " returned error 2 Command output: checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for a BSD-compatible install... /usr/bin/install -c ./configure: line 19796: AC_PROG_INTLTOOL: command not found ./configure: line 19797: PKG_PROG_PKG_CONFIG: command not found checking for working alloca.h... yes checking for alloca... yes checking for res_query in -lresolv... yes checking CoreFoundation/CoreFoundation.h usability... yes checking CoreFoundation/CoreFoundation.h presence... yes checking for CoreFoundation/CoreFoundation.h... yes checking IOKit/IOKitLib.h usability... yes checking IOKit/IOKitLib.h presence... yes checking for IOKit/IOKitLib.h... yes ./configure: line 20521: AM_GLIB_GNU_GETTEXT: command not found configure: error: The msgfmt command is required to build libpurple. If it is installed on your system, ensure that it is in your path. If it is not, install GNU gettext to continue. If you have msgfmt installed, but for some reason this error message is still displayed, you have encountered what appears to be a bug in third-party configure macros. Try setting the MSGFMT environment variable to the absolute path to your msgfmt binary and trying configure again, like this: MSGFMT=/path/to/msgfmt ./configure ... make: *** [config.status] Error 1 Warning: the following items did not execute (for pidgin): org.macports.activate org.macports.build org.macports.destroot org.macports.install -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 08:28:20 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 15:28:20 -0000 Subject: [MacPorts] #16748: gnucash-2.2.7 Dependency problem - wrong name In-Reply-To: <063.e621ee5c9f8241ae564ef00bc17abf00@macports.org> References: <063.e621ee5c9f8241ae564ef00bc17abf00@macports.org> Message-ID: <072.b9ad9a8d329a2681e8bf2e4a1043d152@macports.org> #16748: gnucash-2.2.7 Dependency problem - wrong name ------------------------------------------+--------------------------------- Reporter: lorenzo.costanzia at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: gnucash | ------------------------------------------+--------------------------------- Comment(by macsforever2000 at macports.org): Fixed in r40526. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 08:48:52 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 15:48:52 -0000 Subject: [MacPorts] #16729: graphics/babl-0.0.22: new port In-Reply-To: <054.1c69484347adb5fc1963ec0ccb9194cb@macports.org> References: <054.1c69484347adb5fc1963ec0ccb9194cb@macports.org> Message-ID: <063.7060413df4375cadaaee0184cda53117@macports.org> #16729: graphics/babl-0.0.22: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: graphics babl Port: babl | ---------------------------------+------------------------------------------ Changes (by simon at macports.org): * cc: simon at macports.org (added) * status: new => closed * resolution: => fixed Comment: Committed in r40527, I added a livecheck (so `port livecheck babl` tells you if the port has changed). Thanks for your help. Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 08:51:33 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 15:51:33 -0000 Subject: [MacPorts] #16720: gnome-desktop 2.24.0 build failure In-Reply-To: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> References: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> Message-ID: <064.e1618e5f4ce6baf00a0b10e0843f20e2@macports.org> #16720: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gnome-desktop | ----------------------------------+----------------------------------------- Comment(by pgijnxn02 at sneakemail.com): Since eel requires at least gnome-desktop 2.23.3, here's a Portfile to use as a workaround. The only changes I've made from the 2.22.3 Portfile are the version number and the checksum. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 09:14:03 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 16:14:03 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.409198fc4d1d197f967815c6b7930f2f@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Changes (by simon at macports.org): * cc: simon at macports.org (added) Comment: I just tried building it on Mac OS X 10.4.11 Intel and got the following error. I have no idea why this is happening: {{{ (cd .libs && rm -f subtract.la && ln -s ../subtract.la subtract.la) /bin/sh ../../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/babl-0.0 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -I. -I../.. -I../.. -I../../gegl -I../../gegl/buffer -I../../gegl/operation -I../../gegl/property-types -I../../gegl/module -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -c -o svg-multiply.la.lo svg-multiply.c /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/babl-0.0 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -I. -I../.. -I../.. -I../../gegl -I../../gegl/buffer -I../../gegl/operation -I../../gegl/property-types -I../../gegl/module -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -c svg-multiply.c -fno-common -DPIC -o .libs/svg-multiply.la.o /bin/sh ../../libtool --tag=CC --mode=link /usr/bin/gcc-4.0 -avoid-version -export-dynamic -module -L/opt/local/lib -O2 -Wall -Wdeclaration-after- statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -L/opt/local/lib -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -lintl -liconv -o svg-multiply.la -rpath /opt/local/lib/gegl-0.0 svg- multiply.la.lo /usr/bin/gcc-4.0 ${wl}-undefined ${wl}dynamic_lookup -o .libs/svg- multiply.so -bundle .libs/svg-multiply.la.o -L/opt/local/lib /opt/local/lib/libgio-2.0.dylib /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/libgmodule-2.0.dylib /opt/local/lib/libgthread-2.0.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -mmmx -msse dsymutil .libs/svg-multiply.so || : ERROR: No debug map or DWARF data was found to link.creating svg- multiply.la (cd .libs && rm -f svg-multiply.la && ln -s ../svg-multiply.la svg- multiply.la) /bin/sh ../../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/babl-0.0 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -I. -I../.. -I../.. -I../../gegl -I../../gegl/buffer -I../../gegl/operation -I../../gegl/property-types -I../../gegl/module -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -c -o xor.la.lo xor.c /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/babl-0.0 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -I. -I../.. -I../.. -I../../gegl -I../../gegl/buffer -I../../gegl/operation -I../../gegl/property-types -I../../gegl/module -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -c xor.c -fno-common -DPIC -o .libs/xor.la.o /bin/sh ../../libtool --tag=CC --mode=link /usr/bin/gcc-4.0 -avoid-version -export-dynamic -module -L/opt/local/lib -O2 -Wall -Wdeclaration-after- statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -L/opt/local/lib -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -lintl -liconv -o xor.la -rpath /opt/local/lib/gegl-0.0 xor.la.lo /usr/bin/gcc-4.0 ${wl}-undefined ${wl}dynamic_lookup -o .libs/xor.so -bundle .libs/xor.la.o -L/opt/local/lib /opt/local/lib/libgio-2.0.dylib /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/libgmodule-2.0.dylib /opt/local/lib/libgthread-2.0.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -mmmx -msse dsymutil .libs/xor.so || : ERROR: No debug map or DWARF data was found to link.creating xor.la (cd .libs && rm -f xor.la && ln -s ../xor.la xor.la) make[3]: Nothing to be done for `all-am'. Making all in bin if /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../gegl -I../gegl/buffer -I../gegl/property-types -I../gegl/buffer -I../gegl/operation -I../gegl/module -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/babl-0.0 -I/opt/local/include/libpng12 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -MT gegl.o -MD -MP -MF ".deps/gegl.Tpo" -c -o gegl.o gegl.c; \ then mv -f ".deps/gegl.Tpo" ".deps/gegl.Po"; else rm -f ".deps/gegl.Tpo"; exit 1; fi In file included from /opt/local/include/gtk-2.0/gdk/gdkspawn.h:26, from /opt/local/include/gtk-2.0/gdk/gdk.h:52, from /opt/local/include/gtk-2.0/gtk/gtk.h:31, from gegl.c:43: /opt/local/include/glib-2.0/glib/gspawn.h:22:2: error: #error "Only can be included directly." make[2]: *** [gegl.o] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 }}} Thanks, Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 09:16:00 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 16:16:00 -0000 Subject: [MacPorts] #16760: Pidgin 2.5.1 fails to compile In-Reply-To: <051.0d10c9580b9d7b7e71dd25aaa7dbb099@macports.org> References: <051.0d10c9580b9d7b7e71dd25aaa7dbb099@macports.org> Message-ID: <060.2d56d74667858eb7cf96151206c35faa@macports.org> #16760: Pidgin 2.5.1 fails to compile ------------------------------+--------------------------------------------- Reporter: tafinho at sapo.pt | Owner: simon at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: pidgin compile Port: Pidgin | ------------------------------+--------------------------------------------- Changes (by simon at macports.org): * owner: macports-tickets at lists.macosforge.org => simon at macports.org Old description: > Pidgin 2.5.1 fails to compile on a brand new port instalation. > > log: > > ---> Building pidgin with target all > /bin/sh ./config.status --recheck > running CONFIG_SHELL=/bin/sh /bin/sh ./configure --prefix=/opt/local > --disable-avahi --disable-consoleui --disable-gstreamer --disable- > gtkspell --disable-meanwhile --disable-nm --disable-perl --disable- > screensaver --disable-sm --disable-startup-notification --enable-nss > --mandir=/opt/local/share/man --with-nspr- > includes=/opt/local/include/nspr --with-nspr-libs=/opt/local/lib --with- > nss-includes=/opt/local/include/nss --with-nss-libs=/opt/local/lib > CC=/usr/bin/gcc-4.0 CFLAGS=-O2 LDFLAGS=-L/opt/local/lib -bind_at_load > CPPFLAGS=-I/opt/local/include -no-cpp-precomp CPP=/usr/bin/cpp-4.0 > CXX=/usr/bin/g++-4.0 CXXFLAGS=-O2 FFLAGS=-O2 --no-create --no-recursion > checking build system type... i386-apple-darwin9.5.0 > checking host system type... i386-apple-darwin9.5.0 > checking target system type... i386-apple-darwin9.5.0 > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for a thread-safe mkdir -p... ./install-sh -c -d > checking for gawk... no > checking for mawk... no > checking for nawk... no > checking for awk... awk > checking whether make sets $(MAKE)... yes > checking for sed... /usr/bin/sed > checking for gcc... /usr/bin/gcc-4.0 > checking for C compiler default output file name... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether /usr/bin/gcc-4.0 accepts -g... yes > checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed > checking for style of include used by make... GNU > checking dependency style of /usr/bin/gcc-4.0... gcc3 > checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together... > yes > checking for a sed that does not truncate output... /usr/bin/sed > checking for grep that handles long lines and -e... /usr/bin/grep > checking for egrep... /usr/bin/grep -E > checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple- > darwin9/4.0.1/ld > checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is > GNU ld... no > checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to > reload object files... -r > checking for BSD-compatible nm... /usr/bin/nm -p > checking whether ln -s works... yes > checking how to recognise dependent libraries... pass_all > checking how to run the C preprocessor... /usr/bin/cpp-4.0 > checking for ANSI C header files... yes > checking for sys/types.h... yes > checking for sys/stat.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for memory.h... yes > checking for strings.h... yes > checking for inttypes.h... yes > checking for stdint.h... yes > checking for unistd.h... yes > checking dlfcn.h usability... yes > checking dlfcn.h presence... yes > checking for dlfcn.h... yes > checking whether we are using the GNU C++ compiler... yes > checking whether /usr/bin/g++-4.0 accepts -g... yes > checking dependency style of /usr/bin/g++-4.0... gcc3 > checking how to run the C++ preprocessor... /usr/bin/g++-4.0 -E > checking for g77... no > checking for xlf... no > checking for f77... no > checking for frt... no > checking for pgf77... no > checking for cf77... no > checking for fort77... no > checking for fl32... no > checking for af77... no > checking for xlf90... no > checking for f90... no > checking for pgf90... no > checking for pghpf... no > checking for epcf90... no > checking for gfortran... no > checking for g95... no > checking for xlf95... no > checking for f95... no > checking for fort... no > checking for ifort... no > checking for ifc... no > checking for efc... no > checking for pgf95... no > checking for lf95... no > checking for ftn... no > checking whether we are using the GNU Fortran 77 compiler... no > checking whether accepts -g... no > checking the maximum length of command line arguments... 196608 > checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 > object... ok > checking for objdir... .libs > checking for ar... ar > checking for ranlib... ranlib > checking for strip... strip > checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no > checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common > checking if /usr/bin/gcc-4.0 PIC flag -fno-common works... yes > checking if /usr/bin/gcc-4.0 static flag -static works... no > checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes > checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686 > -apple-darwin9/4.0.1/ld) supports shared libraries... yes > checking dynamic linker characteristics... darwin9.5.0 dyld > checking how to hardcode library paths into programs... immediate > checking whether stripping libraries is possible... yes > checking if libtool supports shared libraries... yes > checking whether to build shared libraries... yes > checking whether to build static libraries... no > configure: creating libtool > appending configuration tag "CXX" to libtool > checking for ld used by /usr/bin/g++-4.0... /usr/libexec/gcc/i686-apple- > darwin9/4.0.1/ld > checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is > GNU ld... no > checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686 > -apple-darwin9/4.0.1/ld) supports shared libraries... yes > checking for /usr/bin/g++-4.0 option to produce PIC... -fno-common > checking if /usr/bin/g++-4.0 PIC flag -fno-common works... yes > checking if /usr/bin/g++-4.0 static flag -static works... no > checking if /usr/bin/g++-4.0 supports -c -o file.o... yes > checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686 > -apple-darwin9/4.0.1/ld) supports shared libraries... yes > checking dynamic linker characteristics... darwin9.5.0 dyld > checking how to hardcode library paths into programs... immediate > appending configuration tag "F77" to libtool > checking for a BSD-compatible install... /usr/bin/install -c > ./configure: line 19796: AC_PROG_INTLTOOL: command not found > ./configure: line 19797: PKG_PROG_PKG_CONFIG: command not found > checking for working alloca.h... yes > checking for alloca... yes > checking for res_query in -lresolv... yes > checking CoreFoundation/CoreFoundation.h usability... yes > checking CoreFoundation/CoreFoundation.h presence... yes > checking for CoreFoundation/CoreFoundation.h... yes > checking IOKit/IOKitLib.h usability... yes > checking IOKit/IOKitLib.h presence... yes > checking for IOKit/IOKitLib.h... yes > ./configure: line 20521: AM_GLIB_GNU_GETTEXT: command not found > configure: error: > > The msgfmt command is required to build libpurple. If it is installed > on your system, ensure that it is in your path. If it is not, install > GNU gettext to continue. > > If you have msgfmt installed, but for some reason this error message > is still displayed, you have encountered what appears to be a bug in > third-party configure macros. Try setting the MSGFMT environment > variable to the absolute path to your msgfmt binary and trying > configure again, like this: > > MSGFMT=/path/to/msgfmt ./configure ... > > make: *** [config.status] Error 1 > Error: Target org.macports.build returned: shell command " cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.5.1" > && make all " returned error 2 > Command output: checking how to hardcode library paths into programs... > immediate > appending configuration tag "F77" to libtool > checking for a BSD-compatible install... /usr/bin/install -c > ./configure: line 19796: AC_PROG_INTLTOOL: command not found > ./configure: line 19797: PKG_PROG_PKG_CONFIG: command not found > checking for working alloca.h... yes > checking for alloca... yes > checking for res_query in -lresolv... yes > checking CoreFoundation/CoreFoundation.h usability... yes > checking CoreFoundation/CoreFoundation.h presence... yes > checking for CoreFoundation/CoreFoundation.h... yes > checking IOKit/IOKitLib.h usability... yes > checking IOKit/IOKitLib.h presence... yes > checking for IOKit/IOKitLib.h... yes > ./configure: line 20521: AM_GLIB_GNU_GETTEXT: command not found > configure: error: > > The msgfmt command is required to build libpurple. If it is installed > on your system, ensure that it is in your path. If it is not, install > GNU gettext to continue. > > If you have msgfmt installed, but for some reason this error message > is still displayed, you have encountered what appears to be a bug in > third-party configure macros. Try setting the MSGFMT environment > variable to the absolute path to your msgfmt binary and trying > configure again, like this: > > MSGFMT=/path/to/msgfmt ./configure ... > > make: *** [config.status] Error 1 > > Warning: the following items did not execute (for pidgin): > org.macports.activate org.macports.build org.macports.destroot > org.macports.install New description: Pidgin 2.5.1 fails to compile on a brand new port instalation. log: {{{ ---> Building pidgin with target all /bin/sh ./config.status --recheck running CONFIG_SHELL=/bin/sh /bin/sh ./configure --prefix=/opt/local --disable-avahi --disable-consoleui --disable-gstreamer --disable-gtkspell --disable-meanwhile --disable-nm --disable-perl --disable-screensaver --disable-sm --disable-startup-notification --enable-nss --mandir=/opt/local/share/man --with-nspr-includes=/opt/local/include/nspr --with-nspr-libs=/opt/local/lib --with-nss-includes=/opt/local/include/nss --with-nss-libs=/opt/local/lib CC=/usr/bin/gcc-4.0 CFLAGS=-O2 LDFLAGS=-L/opt/local/lib -bind_at_load CPPFLAGS=-I/opt/local/include -no- cpp-precomp CPP=/usr/bin/cpp-4.0 CXX=/usr/bin/g++-4.0 CXXFLAGS=-O2 FFLAGS=-O2 --no-create --no-recursion checking build system type... i386-apple-darwin9.5.0 checking host system type... i386-apple-darwin9.5.0 checking target system type... i386-apple-darwin9.5.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking for sed... /usr/bin/sed checking for gcc... /usr/bin/gcc-4.0 checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.0 accepts -g... yes checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of /usr/bin/gcc-4.0... gcc3 checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together... yes checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -p checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... /usr/bin/cpp-4.0 checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether /usr/bin/g++-4.0 accepts -g... yes checking dependency style of /usr/bin/g++-4.0... gcc3 checking how to run the C++ preprocessor... /usr/bin/g++-4.0 -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common checking if /usr/bin/gcc-4.0 PIC flag -fno-common works... yes checking if /usr/bin/gcc-4.0 static flag -static works... no checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin9.5.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by /usr/bin/g++-4.0... /usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld) supports shared libraries... yes checking for /usr/bin/g++-4.0 option to produce PIC... -fno-common checking if /usr/bin/g++-4.0 PIC flag -fno-common works... yes checking if /usr/bin/g++-4.0 static flag -static works... no checking if /usr/bin/g++-4.0 supports -c -o file.o... yes checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple- darwin9/4.0.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin9.5.0 dyld checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for a BSD-compatible install... /usr/bin/install -c ./configure: line 19796: AC_PROG_INTLTOOL: command not found ./configure: line 19797: PKG_PROG_PKG_CONFIG: command not found checking for working alloca.h... yes checking for alloca... yes checking for res_query in -lresolv... yes checking CoreFoundation/CoreFoundation.h usability... yes checking CoreFoundation/CoreFoundation.h presence... yes checking for CoreFoundation/CoreFoundation.h... yes checking IOKit/IOKitLib.h usability... yes checking IOKit/IOKitLib.h presence... yes checking for IOKit/IOKitLib.h... yes ./configure: line 20521: AM_GLIB_GNU_GETTEXT: command not found configure: error: The msgfmt command is required to build libpurple. If it is installed on your system, ensure that it is in your path. If it is not, install GNU gettext to continue. If you have msgfmt installed, but for some reason this error message is still displayed, you have encountered what appears to be a bug in third-party configure macros. Try setting the MSGFMT environment variable to the absolute path to your msgfmt binary and trying configure again, like this: MSGFMT=/path/to/msgfmt ./configure ... make: *** [config.status] Error 1 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.5.1" && make all " returned error 2 Command output: checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for a BSD-compatible install... /usr/bin/install -c ./configure: line 19796: AC_PROG_INTLTOOL: command not found ./configure: line 19797: PKG_PROG_PKG_CONFIG: command not found checking for working alloca.h... yes checking for alloca... yes checking for res_query in -lresolv... yes checking CoreFoundation/CoreFoundation.h usability... yes checking CoreFoundation/CoreFoundation.h presence... yes checking for CoreFoundation/CoreFoundation.h... yes checking IOKit/IOKitLib.h usability... yes checking IOKit/IOKitLib.h presence... yes checking for IOKit/IOKitLib.h... yes ./configure: line 20521: AM_GLIB_GNU_GETTEXT: command not found configure: error: The msgfmt command is required to build libpurple. If it is installed on your system, ensure that it is in your path. If it is not, install GNU gettext to continue. If you have msgfmt installed, but for some reason this error message is still displayed, you have encountered what appears to be a bug in third-party configure macros. Try setting the MSGFMT environment variable to the absolute path to your msgfmt binary and trying configure again, like this: MSGFMT=/path/to/msgfmt ./configure ... make: *** [config.status] Error 1 Warning: the following items did not execute (for pidgin): org.macports.activate org.macports.build org.macports.destroot org.macports.install }}} -- Comment: I don't understand this, `msgfmt` is installed by the gettext port which is installed by gtk2.[[BR]]Please check if gettext is active (`port installed gettext`) and if `msgfmt` is available (`which msgfmt`). Thanks, Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 09:16:49 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 16:16:49 -0000 Subject: [MacPorts] #16759: Update file-4.25 to file-4.26 In-Reply-To: <062.513c4d68b951f0b7825f6cf1512ee8d3@macports.org> References: <062.513c4d68b951f0b7825f6cf1512ee8d3@macports.org> Message-ID: <071.70974a7161c3d0420af82db3e08f9757@macports.org> #16759: Update file-4.25 to file-4.26 -----------------------------------------+---------------------------------- Reporter: jay-macports at shopwatch.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: file | -----------------------------------------+---------------------------------- Changes (by simon at macports.org): * cc: simon at macports.org (added) * status: new => closed * resolution: => fixed Comment: Committed in r40528. Thanks for your help. Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 09:24:24 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 16:24:24 -0000 Subject: [MacPorts] #16128: Fail install Pidgin 2.4.3 on Leopard 10.5.1 with macports 1.6.00 In-Reply-To: <059.dff145e48b83536ff0daf0c31e68506a@macports.org> References: <059.dff145e48b83536ff0daf0c31e68506a@macports.org> Message-ID: <068.74bac1565e8b1a0298d89fbc2cc0ae90@macports.org> #16128: Fail install Pidgin 2.4.3 on Leopard 10.5.1 with macports 1.6.00 --------------------------------------+------------------------------------- Reporter: noah.easterly at gmail.com | Owner: simon at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: Port: | --------------------------------------+------------------------------------- Changes (by simon at macports.org): * status: new => closed * resolution: => worksforme Comment: Have you tried installing the latest version 2.5.1? I'm closing this ticket for now, if the latest version also fails, please reopen the ticket or create a new one. Thanks, Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 09:40:21 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 16:40:21 -0000 Subject: [MacPorts] #16760: Pidgin 2.5.1 fails to compile In-Reply-To: <051.0d10c9580b9d7b7e71dd25aaa7dbb099@macports.org> References: <051.0d10c9580b9d7b7e71dd25aaa7dbb099@macports.org> Message-ID: <060.c8615116411c4be0f750d8c4b50b6b50@macports.org> #16760: Pidgin 2.5.1 fails to compile ------------------------------+--------------------------------------------- Reporter: tafinho at sapo.pt | Owner: simon at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: pidgin compile Port: Pidgin | ------------------------------+--------------------------------------------- Comment(by tafinho at sapo.pt): I'm betting on a PATH problem, but here goes: sudo port installed gettext The following ports are currently installed: gettext @0.17_3 (active) which msgfmt /opt/local/bin/msgfmt -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 10:56:37 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 17:56:37 -0000 Subject: [MacPorts] #16761: python26 install location wrong Message-ID: <052.8b615eb20fa95ba63ba61cc835e78587@macports.org> #16761: python26 install location wrong ------------------------------+--------------------------------------------- Reporter: jwa at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: python26 ------------------------------+--------------------------------------------- python versions 2.4 and 2.5 put some apps into /Applications/MacPorts/MacPython version -directory. python26 puts the same apps directly into /Applications, which is incorrect -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 11:12:45 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 18:12:45 -0000 Subject: [MacPorts] #16682: x264 gtk gui In-Reply-To: <059.5c2d2051c7b30ef0aeaa78ecb5c37a2f@macports.org> References: <059.5c2d2051c7b30ef0aeaa78ecb5c37a2f@macports.org> Message-ID: <068.4b6ed9b318973a6388fd5d2ddb86c598@macports.org> #16682: x264 gtk gui --------------------------------------+------------------------------------- Reporter: myschizobuddy at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | --------------------------------------+------------------------------------- Comment(by myschizobuddy at gmail.com): Don't commit this latest git version has seen gtk and avc2avi removed from core. there will no longer be a gtk gui that comes with x264 Also they have reworked the subme system, so all new versions of x264 will break existing code that people have written so far. Its better to have a newer x264 without the gui, avc2avi and new subme system -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 11:20:21 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 18:20:21 -0000 Subject: [MacPorts] #16762: omniORB-4.1.3 (update from 4.1.0) Message-ID: <054.c83315e03785d0815e68cf8d03fce5ae@macports.org> #16762: omniORB-4.1.3 (update from 4.1.0) --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: omniORB | Port: --------------------------------+------------------------------------------- Update from 4.1.0 to new 4.1.3 version. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 11:31:24 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 18:31:24 -0000 Subject: [MacPorts] #16763: py-omniORBpy-3.3 (upgrade from 3.0) Message-ID: <054.b8d50a63e8f1d3fefb61a980375573af@macports.org> #16763: py-omniORBpy-3.3 (upgrade from 3.0) --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: python omniORB | Port: py-omniORBpy --------------------------------+------------------------------------------- Upgrade py-omniORBpy from 3.0 to 3.3. Added support for python2.5 local installation (complements #16762). Added patch for long-standing bug in omniORBpy (see http://www.omniorb- support.com/pipermail/omniorb-dev/2008-October/000255.html) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 11:51:29 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 18:51:29 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.cbe11c087f62326f35dd8fea1e8a9ffe@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by macsforever2000 at macports.org): Replying to [comment:8 benlight@?]: > I believe I tried this already, please see above. Thanks anyway. You need to do it again as he says. That's the bug. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 11:54:20 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 18:54:20 -0000 Subject: [MacPorts] #16757: lzo package fails checksum In-Reply-To: <059.e0b788d2382878fc083b374b5afe2557@macports.org> References: <059.e0b788d2382878fc083b374b5afe2557@macports.org> Message-ID: <068.efb2d497b97b1601ab2c7017c14f90ce@macports.org> #16757: lzo package fails checksum --------------------------------------+------------------------------------- Reporter: rom.velasquez at gmail.com | Owner: blb at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: lzo | --------------------------------------+------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => blb at macports.org * port: => lzo Old description: > When trying to install lzo (1.0.8) I get a failed checksum message: > > ---> Verifying checksum(s) for lzo > Error: Checksum (md5) mismatch for lzo-1.08.tar.gz > Error: Target org.macports.checksum returned: Unable to verify file > checksums > Error: Status 1 encountered during processing. > > Even if I set the checksum.skip=yes option it still fails. The only way > I got the package to install correctly was to manually unpack the source > package and move it to the work directory and then rerun the install > skipping the checksum. New description: When trying to install lzo (1.0.8) I get a failed checksum message: {{{ ---> Verifying checksum(s) for lzo Error: Checksum (md5) mismatch for lzo-1.08.tar.gz Error: Target org.macports.checksum returned: Unable to verify file checksums Error: Status 1 encountered during processing. }}} Even if I set the checksum.skip=yes option it still fails. The only way I got the package to install correctly was to manually unpack the source package and move it to the work directory and then rerun the install skipping the checksum. -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 12:14:36 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 19:14:36 -0000 Subject: [MacPorts] #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 In-Reply-To: <054.65e6147a90d5961bdef3ce6f45c7f899@macports.org> References: <054.65e6147a90d5961bdef3ce6f45c7f899@macports.org> Message-ID: <063.e04d88b4f7f1477ef02cd479d9ffebfe@macports.org> #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 ---------------------------------+------------------------------------------ Reporter: captsolo at gmail.com | Owner: gwright at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gtk2hs | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * cc: gwright at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => gwright at macports.org * port: => gtk2hs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 12:14:54 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 19:14:54 -0000 Subject: [MacPorts] #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 In-Reply-To: <054.65e6147a90d5961bdef3ce6f45c7f899@macports.org> References: <054.65e6147a90d5961bdef3ce6f45c7f899@macports.org> Message-ID: <063.efa263e3192f1e23d52c3c463a745f13@macports.org> #16758: gtk2hs variant for compiling with the no_x11 variant of gtk2 ---------------------------------+------------------------------------------ Reporter: captsolo at gmail.com | Owner: gwright at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gtk2hs | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * milestone: Port Bugs => Port Enhancements -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 12:57:11 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 19:57:11 -0000 Subject: [MacPorts] #16761: python26 install location wrong In-Reply-To: <052.8b615eb20fa95ba63ba61cc835e78587@macports.org> References: <052.8b615eb20fa95ba63ba61cc835e78587@macports.org> Message-ID: <061.e4cc3c2bd63e18e505e88d0778fa46bb@macports.org> #16761: python26 install location wrong -------------------------------+-------------------------------------------- Reporter: jwa at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: python26 | -------------------------------+-------------------------------------------- Changes (by blb at macports.org): * cc: blb at macports.org (added) Comment: FYI, I'm putting together some patches for python26 to fix this as well as some of the other issues that currently affect 2.5...since there are no modules that can be installed as yet, this is as good a time as any to fix everything we can. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 13:03:03 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 20:03:03 -0000 Subject: [MacPorts] #16757: lzo package fails checksum In-Reply-To: <059.e0b788d2382878fc083b374b5afe2557@macports.org> References: <059.e0b788d2382878fc083b374b5afe2557@macports.org> Message-ID: <068.81c50e77815ccbae8f3cb176b8912f2e@macports.org> #16757: lzo package fails checksum --------------------------------------+------------------------------------- Reporter: rom.velasquez at gmail.com | Owner: blb at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: Port: lzo | --------------------------------------+------------------------------------- Changes (by blb at macports.org): * status: new => closed * resolution: => worksforme Comment: Sounds like you received a bad download, I just grabbed it from both www.oberhumer.com and distfiles.macports.org and they agree with the Portfile. You can have MacPorts retry a download by using {{{sudo port clean --dist lzo}}} then try again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 13:23:29 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 20:23:29 -0000 Subject: [MacPorts] #16691: checksum (sha1) mismatch for postgis-1.3.3.tar.gz In-Reply-To: <056.38b5ec9583fa0b081987a157c7953ecc@macports.org> References: <056.38b5ec9583fa0b081987a157c7953ecc@macports.org> Message-ID: <065.c983994e843b9cd2b68bf982175531f1@macports.org> #16691: checksum (sha1) mismatch for postgis-1.3.3.tar.gz -----------------------------------+---------------------------------------- Reporter: aaabbbdddde at yahoo.de | Owner: frank-lists at auroralux.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: postgis checksum error Port: postgis | -----------------------------------+---------------------------------------- Comment(by jan at krutisch.de): Some additional info: The checksum of the current version would be 96342effdf6fd79e8deb148916cd3f97724ddd4d (replacing the checksum in the portfile with this number makes it install for me, but a little more fact-checking might be advisable). I skimmed (albeit superficially) through the postgis-devel mailing list (to be found at http://postgis.refractions.net/pipermail/postgis-devel/ ), but did find no notice of any unplanned-in-release update and the date stated on the download page (http://postgis.refractions.net/download/ ) is the same as the original announcement date (12th of April), so no clues here either. Best strategy would be (IMHO) to ask on the mailinglist (assuming that the package maintainer is on that list anyway, I'll leave that to her/him), or, second best, to assume that the postgis servers are safe and simply change the checksum. I'll upload a patch that does that. :) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 15:20:55 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 22:20:55 -0000 Subject: [MacPorts] #16763: py-omniORBpy-3.3 (upgrade from 3.0) In-Reply-To: <054.b8d50a63e8f1d3fefb61a980375573af@macports.org> References: <054.b8d50a63e8f1d3fefb61a980375573af@macports.org> Message-ID: <063.29675abc99845ce5ef9ac50b88ea25c4@macports.org> #16763: py-omniORBpy-3.3 (upgrade from 3.0) ---------------------------------+------------------------------------------ Reporter: stromnov at gmail.com | Owner: gr281 at cam.ac.uk Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: python omniORB Port: py-omniORBpy | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * cc: gr281 at cam.ac.uk (removed) * owner: macports-tickets at lists.macosforge.org => gr281 at cam.ac.uk -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 15:21:25 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 22:21:25 -0000 Subject: [MacPorts] #16762: omniORB-4.1.3 (update from 4.1.0) In-Reply-To: <054.c83315e03785d0815e68cf8d03fce5ae@macports.org> References: <054.c83315e03785d0815e68cf8d03fce5ae@macports.org> Message-ID: <063.eba014db87a8961d96a31f82eacb6119@macports.org> #16762: omniORB-4.1.3 (update from 4.1.0) ---------------------------------+------------------------------------------ Reporter: stromnov at gmail.com | Owner: gr281 at cam.ac.uk Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: omniORB | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * cc: gr281 at cam.ac.uk (removed) * keywords: omniORB => * port: => omniORB * owner: macports-tickets at lists.macosforge.org => gr281 at cam.ac.uk -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 15:29:55 2008 From: noreply at macports.org (MacPorts) Date: Sun, 05 Oct 2008 22:29:55 -0000 Subject: [MacPorts] #16691: checksum (sha1) mismatch for postgis-1.3.3.tar.gz In-Reply-To: <056.38b5ec9583fa0b081987a157c7953ecc@macports.org> References: <056.38b5ec9583fa0b081987a157c7953ecc@macports.org> Message-ID: <065.c4297a592db24c8de5a1a155d149a4a1@macports.org> #16691: checksum (sha1) mismatch for postgis-1.3.3.tar.gz -----------------------------------+---------------------------------------- Reporter: aaabbbdddde at yahoo.de | Owner: frank-lists at auroralux.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: postgis checksum error Port: postgis | -----------------------------------+---------------------------------------- Comment(by jmr at macports.org): The file on distfiles.macports.org has the checksum in the portfile, so you can use the workaround described in [wiki:ProblemHotlist#Fetchfailures]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 17:09:09 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 00:09:09 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.eb03f690ce9fefa11c458339e2027199@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by vinc17 at macports.org): Here the problem disappears after deactivating gconf @2.24.0_0 and reactivating gconf @2.22.0_0. So, I suppose the bug is in gconf @2.24.0_0. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 19:14:42 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 02:14:42 -0000 Subject: [MacPorts] #16744: Allow universal builds in clucene, cyrus-sasl2, gpgme, flac, pth In-Reply-To: <056.0f39cff6ca5536b1eb2e9ab8ee360112@macports.org> References: <056.0f39cff6ca5536b1eb2e9ab8ee360112@macports.org> Message-ID: <065.8d2e762d58f3bddca8fec13aa35d7bd0@macports.org> #16744: Allow universal builds in clucene, cyrus-sasl2, gpgme, flac, pth -------------------------------------------------+-------------------------- Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: universal build Port: clucene cyrus-sasl2 gpgme flac pth | -------------------------------------------------+-------------------------- Comment(by illogical1 at gmail.com): cdparanoia portfile probably doesn't need the configure.xxx bits -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 19:34:32 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 02:34:32 -0000 Subject: [MacPorts] #16744: Allow universal builds in clucene, cyrus-sasl2, gpgme, flac, pth In-Reply-To: <056.0f39cff6ca5536b1eb2e9ab8ee360112@macports.org> References: <056.0f39cff6ca5536b1eb2e9ab8ee360112@macports.org> Message-ID: <065.fc940e691cc84ea8b41a960d9906bf39@macports.org> #16744: Allow universal builds in clucene, cyrus-sasl2, gpgme, flac, pth -------------------------------------------------+-------------------------- Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: universal build Port: clucene cyrus-sasl2 gpgme flac pth | -------------------------------------------------+-------------------------- Comment(by blb at macports.org): FYI, a slightly different method for handling cyrus-sasl2 is in #14132. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 19:40:02 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 02:40:02 -0000 Subject: [MacPorts] #16764: Updated Chicken port to 3.4.0 Message-ID: <059.fbfa31f27f51af36869431b7fe2e6a15@macports.org> #16764: Updated Chicken port to 3.4.0 -------------------------------------+-------------------------------------- Reporter: ivan.g.raikov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: chicken,scheme | Port: chicken -------------------------------------+-------------------------------------- The current version of Chicken Scheme is now 3.4.0. The updated Portfile below can build and install Chicken 3.4.0. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 19:54:46 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 02:54:46 -0000 Subject: [MacPorts] #16111: python25-2.5.2 builds differing dylib and framework libraries In-Reply-To: <052.edfe39d9be496496a111fa500a9e4102@macports.org> References: <052.edfe39d9be496496a111fa500a9e4102@macports.org> Message-ID: <061.4a45af4abc1f34ece8e8e43b371815bd@macports.org> #16111: python25-2.5.2 builds differing dylib and framework libraries -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: python24 python30 framework Port: python25 | -------------------------------+-------------------------------------------- Comment(by blb at macports.org): Ack, that last one isn't right either; the files/patch- Makefile.pre.in.diff is for #9831, this update actually removes the need for that diff at all (but #9831 needs a new one). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 20:04:47 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 03:04:47 -0000 Subject: [MacPorts] #16764: Updated Chicken port to 3.4.0 In-Reply-To: <059.fbfa31f27f51af36869431b7fe2e6a15@macports.org> References: <059.fbfa31f27f51af36869431b7fe2e6a15@macports.org> Message-ID: <068.d83841446e9b59efb9bb463d64ffc1a8@macports.org> #16764: Updated Chicken port to 3.4.0 --------------------------------------+------------------------------------- Reporter: ivan.g.raikov at gmail.com | Owner: arto.bendiken at gmail.com Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: chicken,scheme Port: chicken | --------------------------------------+------------------------------------- Changes (by blb at macports.org): * cc: waqar at macports.org (added) * owner: macports-tickets at lists.macosforge.org => arto.bendiken at gmail.com * milestone: Port Enhancements => Port Updates Comment: Assigning/Ccing maintainers. FYI, diffs to Portfiles [http://guide.macports.org/#project.contributing.updates are preferred]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 21:00:48 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 04:00:48 -0000 Subject: [MacPorts] #16765: python26-2.6 numerous improvements Message-ID: <052.c31ae2e6632df35e9d37c36704173c45@macports.org> #16765: python26-2.6 numerous improvements ------------------------------+--------------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: python26 ------------------------------+--------------------------------------------- Will attach six patch files to python26, each to be applied in the lang/python26 directory successively (using patch -p1 < ...). There are six in order to be logically contained. Each patch description: * 0001-Whitespace-changes.patch: {{{ Whitespace changes }}} * 0002-Basic-housekeeping-not-affecting-final-result.patch: {{{ Basic housekeeping, not affecting final result: - calculate major and branch numbers instead of hardcoding - take maintainer - cleanup master_sites (including removing / at end of homepage) - add paths to several files which were relative to worksrcpath, in case port is not in that directory - remove duplicated file in reinplace - remove unneeded post-build piece for case-sensitive FS (tested on HFS+ case sensitive to verify) - fix the python_select file name - obfuscate an email address }}} * 0003-Fix-framework-and-application-installation-locations.patch: {{{ Fix framework and application installation locations to use applications_dir and frameworks_dir (and define if not already, for MacPorts 1.6 compatibility); ticket #16761 }}} * 0004-Fix-library-and-framework-install-discrepancy-ticke.patch: {{{ Fix library and framework install discrepancy; ticket #16111, for 2.5 }}} * 0005-Add-a-no-user-cfg-option-to-distutils-to-ignore-a-us.patch: {{{ Add a no-user-cfg option to distutils to ignore a user's pydistutils.cfg; ticket #9831, for 2.5 }}} * 0006-Fix-universal-SDK-location-python-s-configure-wants.patch: {{{ Fix universal SDK location (python's configure wants to use 10.4 by default, but MacPorts sets MACOSX_DEPLOYMENT_TARGET to 10.5 on 10.5 systems, and that causes errors); no ticket for 2.5, but this could be needed there as well Bump revision }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 22:05:23 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 05:05:23 -0000 Subject: [MacPorts] #16761: python26 install location wrong In-Reply-To: <052.8b615eb20fa95ba63ba61cc835e78587@macports.org> References: <052.8b615eb20fa95ba63ba61cc835e78587@macports.org> Message-ID: <061.d86878e197593ae8a367b04d810f0e0c@macports.org> #16761: python26 install location wrong -------------------------------+-------------------------------------------- Reporter: jwa at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: Port: python26 | -------------------------------+-------------------------------------------- Changes (by blb at macports.org): * status: new => closed * resolution: => duplicate Comment: Dup'ing to #16765 which has a patch to fix this, among others. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 22:10:54 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 05:10:54 -0000 Subject: [MacPorts] #16766: wine 1.0 / wine-devel 1.1.5 install error - perl5.8 checksum Message-ID: <057.970b33b9e5ce765fe80cbbf680c0c2d4@macports.org> #16766: wine 1.0 / wine-devel 1.1.5 install error - perl5.8 checksum ----------------------------------------------+----------------------------- Reporter: epastor at speedy.com.ar | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: wine,wine-devel,perl5.8,checksum | Port: wine / wine-devel ----------------------------------------------+----------------------------- Installation of wine / wine-devel stop with de following error:[[BR]] [[BR]] Error: No checksum set for perl-5.8.8.tar.bz2[[BR]] Error: Target org.macports.checksum returned: Unable to verify file checksums[[BR]] Error: The following dependencies failed to build: libxslt autoconf help2man p5-locale-gettext perl5.8 m4 automake libtool zlib openssl pkgconfig render xrender[[BR]] Error: Status 1 encountered during processing.[[BR]] -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 22:18:51 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 05:18:51 -0000 Subject: [MacPorts] #16766: perl5.8: No checksum set for perl-5.8.8.tar.bz2 (was: wine 1.0 / wine-devel 1.1.5 install error - perl5.8 checksum) In-Reply-To: <057.970b33b9e5ce765fe80cbbf680c0c2d4@macports.org> References: <057.970b33b9e5ce765fe80cbbf680c0c2d4@macports.org> Message-ID: <066.3fbfa742846cd7e7d6e4e198c2cd4437@macports.org> #16766: perl5.8: No checksum set for perl-5.8.8.tar.bz2 ------------------------------------+--------------------------------------- Reporter: epastor at speedy.com.ar | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: perl5.8,checksum Port: perl5.8 | ------------------------------------+--------------------------------------- Changes (by ryandesign at macports.org): * keywords: wine,wine-devel,perl5.8,checksum => perl5.8,checksum * port: wine / wine-devel => perl5.8 Old description: > Installation of wine / wine-devel stop with de following error:[[BR]] > [[BR]] > Error: No checksum set for perl-5.8.8.tar.bz2[[BR]] > Error: Target org.macports.checksum returned: Unable to verify file > checksums[[BR]] > Error: The following dependencies failed to build: libxslt autoconf > help2man p5-locale-gettext perl5.8 m4 automake libtool zlib openssl > pkgconfig render xrender[[BR]] > Error: Status 1 encountered during processing.[[BR]] New description: Installation of wine / wine-devel stop with de following error: {{{ Error: No checksum set for perl-5.8.8.tar.bz2 Error: Target org.macports.checksum returned: Unable to verify file checksums Error: The following dependencies failed to build: libxslt autoconf help2man p5-locale-gettext perl5.8 m4 automake libtool zlib openssl pkgconfig render xrender Error: Status 1 encountered during processing. }}} -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 22:20:59 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 05:20:59 -0000 Subject: [MacPorts] #16766: perl5.8: No checksum set for perl-5.8.8.tar.bz2 In-Reply-To: <057.970b33b9e5ce765fe80cbbf680c0c2d4@macports.org> References: <057.970b33b9e5ce765fe80cbbf680c0c2d4@macports.org> Message-ID: <066.eef2f854d9786772e2ee281a85fb504d@macports.org> #16766: perl5.8: No checksum set for perl-5.8.8.tar.bz2 ------------------------------------+--------------------------------------- Reporter: epastor at speedy.com.ar | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: perl5.8,checksum Port: perl5.8 | ------------------------------------+--------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => worksforme Comment: I can't see any problem with the perl5.8 portfile. I recommend you make sure your ports are up to date: {{{ sudo port -v sync }}} Then clean and try again: {{{ sudo port clean --all perl5.8 sudo port install perl5.8 }}} Please reopen this ticket if that doesn't solve it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 22:31:17 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 05:31:17 -0000 Subject: [MacPorts] #16766: perl5.8: No checksum set for perl-5.8.8.tar.bz2 In-Reply-To: <057.970b33b9e5ce765fe80cbbf680c0c2d4@macports.org> References: <057.970b33b9e5ce765fe80cbbf680c0c2d4@macports.org> Message-ID: <066.1ed4f7cb919ae09d3384cad542eacb3a@macports.org> #16766: perl5.8: No checksum set for perl-5.8.8.tar.bz2 ------------------------------------+--------------------------------------- Reporter: epastor at speedy.com.ar | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: perl5.8,checksum Port: perl5.8 | ------------------------------------+--------------------------------------- Comment(by epastor at speedy.com.ar): is working thanks -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 23:02:53 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 06:02:53 -0000 Subject: [MacPorts] #16765: python26-2.6 numerous improvements In-Reply-To: <052.c31ae2e6632df35e9d37c36704173c45@macports.org> References: <052.c31ae2e6632df35e9d37c36704173c45@macports.org> Message-ID: <061.43caa8dbaaf18de3fc4410777fd07320@macports.org> #16765: python26-2.6 numerous improvements -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: python26 | -------------------------------+-------------------------------------------- Comment(by myschizobuddy at gmail.com): can we have all of the patches in one tarball. thanks -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 23:22:56 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 06:22:56 -0000 Subject: [MacPorts] #16765: python26-2.6 numerous improvements In-Reply-To: <052.c31ae2e6632df35e9d37c36704173c45@macports.org> References: <052.c31ae2e6632df35e9d37c36704173c45@macports.org> Message-ID: <061.cba9f3a60fb58b135c55516f56605b0a@macports.org> #16765: python26-2.6 numerous improvements -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: python26 | -------------------------------+-------------------------------------------- Comment(by myschizobuddy at gmail.com): how many of these patches can benefit 2.5 as well -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 23:26:06 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 06:26:06 -0000 Subject: [MacPorts] #16761: python26 install location wrong In-Reply-To: <052.8b615eb20fa95ba63ba61cc835e78587@macports.org> References: <052.8b615eb20fa95ba63ba61cc835e78587@macports.org> Message-ID: <061.fa00226af9f416ed7268f9015e27ac42@macports.org> #16761: python26 install location wrong -------------------------------+-------------------------------------------- Reporter: jwa at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: Port: python26 | -------------------------------+-------------------------------------------- Comment(by afb at macports.org): Yet another spectacular failure of the mtree setup, I suppose... Too easy to miss the "DEBUG: port installs files in /Applications" -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 23:41:12 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 06:41:12 -0000 Subject: [MacPorts] #16745: Allow macports to compile with apple's gcc 4.2 In-Reply-To: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> References: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> Message-ID: <065.2e72a82911a730e461a84c79cc8a874d@macports.org> #16745: Allow macports to compile with apple's gcc 4.2 -----------------------------------------------------------------------------------------------------------------+ Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: fix compilation gcc 4.2 apple-gcc42 Port: expat giflib ilmbase jasper lcms libgpg-error libvorbis lzmautils openexr subversion tiff flac pth | -----------------------------------------------------------------------------------------------------------------+ Comment(by afb at macports.org): What is the failure with apple gcc 4.2 on tiger, without the patch applied ? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 5 23:49:24 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 06:49:24 -0000 Subject: [MacPorts] #16603: wine does not use OpenGL In-Reply-To: <065.a94dcc9768333000a6d60c68a4042cb7@macports.org> References: <065.a94dcc9768333000a6d60c68a4042cb7@macports.org> Message-ID: <074.739160ad0720a8fbe0036e085bac41eb@macports.org> #16603: wine does not use OpenGL --------------------------------------------+------------------------------- Reporter: jean-jaques at women-at-work.org | Owner: ryandesign at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: wine, wine-devel | --------------------------------------------+------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => fixed * port: wine => wine, wine-devel Comment: Applied the patch to wine and wine-devel in r40534. Now it can at least find libGL. Whether it can actually use it is another matter. Now, instead of {{{ err:wgl:has_opengl Failed to load libGL: dlopen(libGL.1.dylib, 10): image not found err:wgl:has_opengl OpenGL support is disabled. }}} I get {{{ X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 129 (Apple-DRI) Minor opcode of failed request: 2 () Value in failed request: 0x600268 Serial number of failed request: 2894 Current serial number in output stream: 2894 }}} This is on Tiger running the [http://www.graphviz.org/Download_windows.php installer for Graphviz 2.20.2] as a test program. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 00:04:11 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 07:04:11 -0000 Subject: [MacPorts] #16767: py25-libxml2 checksum error Message-ID: <058.39ab1fdae5ee50b6a80d9e1170366f9e@macports.org> #16767: py25-libxml2 checksum error ------------------------------------+--------------------------------------- Reporter: mvanier at cs.caltech.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ------------------------------------+--------------------------------------- I can't get gnome compiled because it hangs up on py25-libxml2: {{{ > sudo port install py25-libxml2 ---> Fetching py25-libxml2 ---> Attempting to fetch libxml2-python-2.6.21.tar.gz from ftp://xmlsoft.org/libxml2/python/ ---> Verifying checksum(s) for py25-libxml2 Error: Checksum (md5) mismatch for libxml2-python-2.6.21.tar.gz Error: Checksum (sha1) mismatch for libxml2-python-2.6.21.tar.gz Error: Checksum (rmd160) mismatch for libxml2-python-2.6.21.tar.gz Error: Target org.macports.checksum returned: Unable to verify file checksums Error: Status 1 encountered during processing. }}} Cleaning and redoing it gives the same result. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 01:02:08 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 08:02:08 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.d058d32013f834d421a86a10ccf85c82@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by hypocrite at lawyer.com): I can confirm that moving back to gconf @2.22.0_0 fixes this bug. I've opened a ticket for the [http://bugzilla.gnome.org/show_bug.cgi?id=555187 gconf people], but will leave this ticket, just in case the bug is actually unrelated to gconf. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 01:02:08 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 08:02:08 -0000 Subject: [MacPorts] #16745: Allow macports to compile with apple's gcc 4.2 In-Reply-To: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> References: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> Message-ID: <065.65e476adaf15b92561cf9f5d8a9983fa@macports.org> #16745: Allow macports to compile with apple's gcc 4.2 -----------------------------------------------------------------------------------------------------------------+ Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: fix compilation gcc 4.2 apple-gcc42 Port: expat giflib ilmbase jasper lcms libgpg-error libvorbis lzmautils openexr subversion tiff flac pth | -----------------------------------------------------------------------------------------------------------------+ Comment(by illogical1 at gmail.com): the failure on tiger is /usr/libexec/gcc/i686-apple-darwin8/4.2.1/ld: unknown flag: -compatibility_version If the ${wl} is remove then the error goes away as nothing gets passed to the linker. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 01:06:06 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 08:06:06 -0000 Subject: [MacPorts] #16745: Allow macports to compile with apple's gcc 4.2 In-Reply-To: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> References: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> Message-ID: <065.9a6400fd9eb9c8d062bcd7314c24b561@macports.org> #16745: Allow macports to compile with apple's gcc 4.2 -----------------------------------------------------------------------------------------------------------------+ Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: fix compilation gcc 4.2 apple-gcc42 Port: expat giflib ilmbase jasper lcms libgpg-error libvorbis lzmautils openexr subversion tiff flac pth | -----------------------------------------------------------------------------------------------------------------+ Comment(by illogical1 at gmail.com): This is only a problem when apple's gcc 4.2 is used in tiger, as I realized while talking to afb on irc. I'll have to test whether updating libtool fixes this. So the status is this on tiger with gcc 4.0, compilation works. on leopard with gcc 4.2, compilation works (for the one port I tested). on tiger with gcc 4.2 compilation breaks @ linking. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 01:32:10 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 08:32:10 -0000 Subject: [MacPorts] #16745: Allow macports to compile with apple's gcc 4.2 In-Reply-To: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> References: <056.b221b6bde66b12d24142b83f003ac8ee@macports.org> Message-ID: <065.b8cfc78ee6dc67ce858b75fac96405b3@macports.org> #16745: Allow macports to compile with apple's gcc 4.2 -----------------------------------------------------------------------------------------------------------------+ Reporter: illogical1 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: fix compilation gcc 4.2 apple-gcc42 Port: expat giflib ilmbase jasper lcms libgpg-error libvorbis lzmautils openexr subversion tiff flac pth | -----------------------------------------------------------------------------------------------------------------+ Comment(by boeyms at macports.org): Replying to [comment:4 illogical1@?]: > I'll have to test whether updating libtool fixes this. As the current maintainer of libtool (I'd be happy to hand this job to someone who uses it more frequently than I do), I'd just like to mention that it seems that the current libtool port will need to be split into one for the 1.5.x line and one for 2.x, as at least one port (libxslt) builds with the former but fails to build with the latter. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 01:54:48 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 08:54:48 -0000 Subject: [MacPorts] #16767: py25-libxml2 checksum error In-Reply-To: <058.39ab1fdae5ee50b6a80d9e1170366f9e@macports.org> References: <058.39ab1fdae5ee50b6a80d9e1170366f9e@macports.org> Message-ID: <067.cc46488edccc4afa17a71d446035f0a4@macports.org> #16767: py25-libxml2 checksum error -------------------------------------+-------------------------------------- Reporter: mvanier at cs.caltech.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by afb at macports.org): Try http://distfiles.macports.org/python/libxml2-python-2.6.21.tar.gz instead (put it under distfiles) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 02:19:11 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 09:19:11 -0000 Subject: [MacPorts] #16724: Update: py25-django-devel to 1.0 In-Reply-To: <053.7ef146d35f3b184f705f37450ba1e98d@macports.org> References: <053.7ef146d35f3b184f705f37450ba1e98d@macports.org> Message-ID: <062.068b1b34e504f1b6e7a00518c16a1895@macports.org> #16724: Update: py25-django-devel to 1.0 --------------------------------+------------------------------------------- Reporter: andi at saerdnaer.de | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: py25-django-devel | --------------------------------+------------------------------------------- Comment(by arthur at arthurkoziel.com): I attached a patch for the current Portfile. However, I would propose to rename the port from py25-django-devel to just py25-django. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 02:24:55 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 09:24:55 -0000 Subject: [MacPorts] #16725: Update py-django-devel to newest version In-Reply-To: <053.cd6fbb0614b9b69b3c5bc529471260c7@macports.org> References: <053.cd6fbb0614b9b69b3c5bc529471260c7@macports.org> Message-ID: <062.d67d00641e0317c116281fc84bdc16dd@macports.org> #16725: Update py-django-devel to newest version --------------------------------+------------------------------------------- Reporter: andi at saerdnaer.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: py-django-devel | --------------------------------+------------------------------------------- Comment(by arthur at arthurkoziel.com): As with #16724, renaming to "py-django" would be great. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 03:06:31 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 10:06:31 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.31c0f7a84c01a453cbcf8cd06732e3c5@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by benlight at mac.com): I tried again and failed again :-( See log below... {{{ miranda:~ ben$ sudo port clean py25-hashlib Password: ---> Cleaning py25-hashlib miranda:~ ben$ sudo port install gnucash ---> Building py25-libxml2 with target build ---> Staging py25-libxml2 into destroot ---> Installing py25-libxml2 2.6.21_1 ---> Activating py25-libxml2 2.6.21_1 ---> Cleaning py25-libxml2 ---> Fetching py25-numeric ---> Attempting to fetch Numeric-24.2.tar.gz from http://downloads.sourceforge.net/numpy ---> Verifying checksum(s) for py25-numeric ---> Extracting py25-numeric ---> Applying patches to py25-numeric ---> Configuring py25-numeric ---> Building py25-numeric with target build ---> Staging py25-numeric into destroot ---> Installing py25-numeric 24.2_1+macosx ---> Activating py25-numeric 24.2_1+macosx ---> Cleaning py25-numeric ---> Fetching getopt ---> Attempting to fetch getopt-1.1.4.tar.gz from http://software.frodo.looijaard.name/getopt/files/ ---> Verifying checksum(s) for getopt ---> Extracting getopt ---> Applying patches to getopt ---> Configuring getopt ---> Building getopt with target all ---> Staging getopt into destroot ---> Installing getopt 1.1.4_1 ---> Activating getopt 1.1.4_1 ---> Cleaning getopt ---> Fetching rarian ---> Attempting to fetch rarian-0.8.1.tar.bz2 from http://mandril.creatis .insa-lyon.fr/linux/gnome.org/sources/rarian/0.8/ ---> Verifying checksum(s) for rarian ---> Extracting rarian ---> Configuring rarian ---> Building rarian with target all ---> Staging rarian into destroot ---> Installing rarian 0.8.1_0 ---> Activating rarian 0.8.1_0 ---> Cleaning rarian ---> Fetching gnome-doc-utils ---> Attempting to fetch gnome-doc-utils-0.14.0.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gnome-doc- utils/0.14/ ---> Verifying checksum(s) for gnome-doc-utils ---> Extracting gnome-doc-utils ---> Configuring gnome-doc-utils ---> Building gnome-doc-utils with target all ---> Staging gnome-doc-utils into destroot ---> Installing gnome-doc-utils 0.14.0_0 ---> Activating gnome-doc-utils 0.14.0_0 ---> Cleaning gnome-doc-utils ---> Fetching hicolor-icon-theme ---> Attempting to fetch hicolor-icon-theme-0.10.tar.gz from http://www.vg.kernel.org/pub/mirrors/gentoo/source/distfiles/ ---> Verifying checksum(s) for hicolor-icon-theme ---> Extracting hicolor-icon-theme ---> Configuring hicolor-icon-theme ---> Building hicolor-icon-theme with target all ---> Staging hicolor-icon-theme into destroot ---> Installing hicolor-icon-theme 0.10_0 ---> Activating hicolor-icon-theme 0.10_0 ---> Cleaning hicolor-icon-theme ---> Fetching p5-xml-namespacesupport ---> Attempting to fetch XML-NamespaceSupport-1.09.tar.gz from http://ftp.ucr.ac.cr/Unix/CPAN/modules/by-module/XML ---> Verifying checksum(s) for p5-xml-namespacesupport ---> Extracting p5-xml-namespacesupport ---> Configuring p5-xml-namespacesupport ---> Building p5-xml-namespacesupport with target all ---> Staging p5-xml-namespacesupport into destroot ---> Installing p5-xml-namespacesupport 1.09_0 ---> Activating p5-xml-namespacesupport 1.09_0 ---> Cleaning p5-xml-namespacesupport ---> Fetching p5-xml-sax ---> Attempting to fetch XML-SAX-0.16.tar.gz from http://ftp.ucr.ac.cr/Unix/CPAN/modules/by-module/XML ---> Verifying checksum(s) for p5-xml-sax ---> Extracting p5-xml-sax ---> Configuring p5-xml-sax ---> Building p5-xml-sax with target all ---> Staging p5-xml-sax into destroot ---> Installing p5-xml-sax 0.16_1 ---> Activating p5-xml-sax 0.16_1 ---> Cleaning p5-xml-sax ---> Fetching p5-xml-simple ---> Attempting to fetch XML-Simple-2.18.tar.gz from http://ftp.ucr.ac.cr/Unix/CPAN/modules/by-module/XML ---> Verifying checksum(s) for p5-xml-simple ---> Extracting p5-xml-simple ---> Configuring p5-xml-simple ---> Building p5-xml-simple with target all ---> Staging p5-xml-simple into destroot ---> Installing p5-xml-simple 2.18_0 ---> Activating p5-xml-simple 2.18_0 ---> Cleaning p5-xml-simple ---> Fetching icon-naming-utils ---> Attempting to fetch icon-naming-utils-0.8.7.tar.gz from http://tango.freedesktop.org/releases/ ---> Verifying checksum(s) for icon-naming-utils ---> Extracting icon-naming-utils ---> Configuring icon-naming-utils ---> Building icon-naming-utils with target all ---> Staging icon-naming-utils into destroot ---> Installing icon-naming-utils 0.8.7_0 ---> Activating icon-naming-utils 0.8.7_0 ---> Cleaning icon-naming-utils ---> Fetching gnome-icon-theme ---> Attempting to fetch gnome-icon-theme-2.24.0.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gnome-icon- theme/2.24/ ---> Verifying checksum(s) for gnome-icon-theme ---> Extracting gnome-icon-theme ---> Configuring gnome-icon-theme ---> Building gnome-icon-theme with target all ---> Staging gnome-icon-theme into destroot ---> Installing gnome-icon-theme 2.24.0_0 ---> Activating gnome-icon-theme 2.24.0_0 ---> Cleaning gnome-icon-theme ---> Fetching gnome-keyring ---> Attempting to fetch gnome-keyring-2.24.0.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gnome- keyring/2.24/ ---> Verifying checksum(s) for gnome-keyring ---> Extracting gnome-keyring ---> Applying patches to gnome-keyring ---> Configuring gnome-keyring ---> Building gnome-keyring with target all ---> Staging gnome-keyring into destroot ---> Installing gnome-keyring 2.24.0_0 ---> Activating gnome-keyring 2.24.0_0 ---> Cleaning gnome-keyring ---> Fetching popt ---> Attempting to fetch popt-1.13.tar.gz from http://rpm5.org/files/popt/ ---> Verifying checksum(s) for popt ---> Extracting popt ---> Configuring popt ---> Building popt with target all ---> Staging popt into destroot ---> Installing popt 1.13_0 ---> Activating popt 1.13_0 ---> Cleaning popt ---> Fetching desktop-file-utils ---> Attempting to fetch desktop-file-utils-0.15.tar.gz from http://www.freedesktop.org/software/desktop-file-utils/releases/ ---> Verifying checksum(s) for desktop-file-utils ---> Extracting desktop-file-utils ---> Configuring desktop-file-utils ---> Building desktop-file-utils with target all ---> Staging desktop-file-utils into destroot ---> Installing desktop-file-utils 0.15_0 ---> Activating desktop-file-utils 0.15_0 ---> Cleaning desktop-file-utils ---> Fetching gnome-mime-data ---> Attempting to fetch gnome-mime-data-2.18.0.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gnome-mime- data/2.18/ ---> Verifying checksum(s) for gnome-mime-data ---> Extracting gnome-mime-data ---> Configuring gnome-mime-data ---> Building gnome-mime-data with target all ---> Staging gnome-mime-data into destroot ---> Installing gnome-mime-data 2.18.0_3 ---> Activating gnome-mime-data 2.18.0_3 ---> Cleaning gnome-mime-data ---> Fetching gnome-vfs ---> Attempting to fetch gnome-vfs-2.24.0.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gnome- vfs/2.24/ ---> Verifying checksum(s) for gnome-vfs ---> Extracting gnome-vfs ---> Configuring gnome-vfs ---> Building gnome-vfs with target all ---> Staging gnome-vfs into destroot ---> Installing gnome-vfs 2.24.0_0 ---> Activating gnome-vfs 2.24.0_0 ---> Cleaning gnome-vfs ---> Fetching libart_lgpl ---> Attempting to fetch libart_lgpl-2.3.20.tar.bz2 from http://mandril.creatis.insa- lyon.fr/linux/gnome.org/sources/libart_lgpl/2.3/ ---> Verifying checksum(s) for libart_lgpl ---> Extracting libart_lgpl ---> Configuring libart_lgpl ---> Building libart_lgpl with target all ---> Staging libart_lgpl into destroot ---> Installing libart_lgpl 2.3.20_0 ---> Activating libart_lgpl 2.3.20_0 ---> Cleaning libart_lgpl ---> Fetching libbonobo ---> Attempting to fetch libbonobo-2.24.0.tar.bz2 from http://mandril.creatis.insa- lyon.fr/linux/gnome.org/sources/libbonobo/2.24/ ---> Verifying checksum(s) for libbonobo ---> Extracting libbonobo ---> Configuring libbonobo ---> Building libbonobo with target all ---> Staging libbonobo into destroot ---> Installing libbonobo 2.24.0_0 ---> Activating libbonobo 2.24.0_0 ---> Cleaning libbonobo ---> Fetching libgnome ---> Attempting to fetch libgnome-2.24.1.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/libgnome/2.24/ ---> Verifying checksum(s) for libgnome ---> Extracting libgnome ---> Configuring libgnome ---> Building libgnome with target all ---> Staging libgnome into destroot ---> Installing libgnome 2.24.1_1 ---> Activating libgnome 2.24.1_1 ---> Cleaning libgnome ---> Fetching libgnomecanvas ---> Attempting to fetch libgnomecanvas-2.20.1.1.tar.bz2 from http://mandril.creatis.insa- lyon.fr/linux/gnome.org/sources/libgnomecanvas/2.20/ ---> Verifying checksum(s) for libgnomecanvas ---> Extracting libgnomecanvas ---> Configuring libgnomecanvas ---> Building libgnomecanvas with target all ---> Staging libgnomecanvas into destroot ---> Installing libgnomecanvas 2.20.1.1_1 ---> Activating libgnomecanvas 2.20.1.1_1 ---> Cleaning libgnomecanvas ---> Fetching libbonoboui ---> Attempting to fetch libbonoboui-2.24.0.tar.bz2 from http://mandril.creatis.insa- lyon.fr/linux/gnome.org/sources/libbonoboui/2.24/ ---> Verifying checksum(s) for libbonoboui ---> Extracting libbonoboui ---> Configuring libbonoboui ---> Building libbonoboui with target all ---> Staging libbonoboui into destroot ---> Installing libbonoboui 2.24.0_0 ---> Activating libbonoboui 2.24.0_0 ---> Cleaning libbonoboui ---> Fetching libgnomeui ---> Attempting to fetch libgnomeui-2.24.0.tar.bz2 from http://mandril.creatis.insa- lyon.fr/linux/gnome.org/sources/libgnomeui/2.24/ ---> Verifying checksum(s) for libgnomeui ---> Extracting libgnomeui ---> Configuring libgnomeui ---> Building libgnomeui with target all ---> Staging libgnomeui into destroot ---> Installing libgnomeui 2.24.0_0 ---> Activating libgnomeui 2.24.0_0 ---> Cleaning libgnomeui ---> Fetching gtk-engines2 ---> Attempting to fetch gtk-engines-2.16.0.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gtk- engines/2.16 ---> Verifying checksum(s) for gtk-engines2 ---> Extracting gtk-engines2 ---> Configuring gtk-engines2 ---> Building gtk-engines2 with target all ---> Staging gtk-engines2 into destroot ---> Installing gtk-engines2 2.16.0_0 ---> Activating gtk-engines2 2.16.0_0 ---> Cleaning gtk-engines2 ---> Fetching gnome-themes ---> Attempting to fetch gnome-themes-2.24.0.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gnome- themes/2.24/ ---> Verifying checksum(s) for gnome-themes ---> Extracting gnome-themes ---> Configuring gnome-themes ---> Building gnome-themes with target all ---> Staging gnome-themes into destroot ---> Installing gnome-themes 2.24.0_0 ---> Activating gnome-themes 2.24.0_0 ---> Cleaning gnome-themes ---> Fetching libsoup ---> Attempting to fetch libsoup-2.24.0.1.tar.bz2 from http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/libsoup/2.24/ ---> Verifying checksum(s) for libsoup ---> Extracting libsoup ---> Configuring libsoup ---> Building libsoup with target all ---> Staging libsoup into destroot ---> Installing libsoup 2.24.0.1_0 ---> Activating libsoup 2.24.0.1_0 ---> Cleaning libsoup ---> Fetching gvfs ---> Attempting to fetch gvfs-1.0.1.tar.bz2 from http://mandril.creatis .insa-lyon.fr/linux/gnome.org/sources/gvfs/1.0/ ---> Verifying checksum(s) for gvfs ---> Extracting gvfs ---> Configuring gvfs ---> Building gvfs with target all ---> Staging gvfs into destroot ---> Installing gvfs 1.0.1_0 ---> Activating gvfs 1.0.1_0 ---> Cleaning gvfs ---> Fetching fftw-3 ---> Attempting to fetch fftw-3.1.2.tar.gz from http://www.fftw.org/ ---> Verifying checksum(s) for fftw-3 ---> Extracting fftw-3 ---> Configuring fftw-3 ---> Building fftw-3 with target all ---> Staging fftw-3 into destroot ---> Installing fftw-3 3.1.2_6 ---> Activating fftw-3 3.1.2_6 ---> Cleaning fftw-3 ---> Fetching py25-zlib ---> Verifying checksum(s) for py25-zlib ---> Extracting py25-zlib ---> Configuring py25-zlib ---> Building py25-zlib with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-zlib/work/Python-2.5.2/Modules" && /opt/local/bin/python2.5 setup.py build " returned error 1 Command output: running build running build_ext building 'zlib' extension creating build creating build/temp.macosx-10.3-i386-2.5 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -I/opt/local/include -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -c zlibmodule.c -o build/temp.macosx-10.3-i386-2.5/zlibmodule.o unable to execute -DNDEBUG: No such file or directory error: command '-DNDEBUG' failed with exit status 1 Error: The following dependencies failed to build: evince nautilus eel gnome-desktop py25-gnome py25-gtk py25-cairo py25-numpy py25-nose py25-setuptools py25-zlib py25-orbit startup-notification gnome-menus librsvg libcroco libgsf bzip2 libexif poppler poppler-data goffice guile16 libgnomeprintui libgnomeprint bison libgnomecups libgtkhtml3 enchant p5 -finance-quote p5-crypt-ssleay p5-libwww-perl p5-compress-zlib p5 -compress-raw-zlib p5-io-compress-base p5-io-compress-zlib p5-html-parser p5-html-tagset p5-uri p5-datemanip p5-html-tableextract slib slib-guile16 Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 03:29:23 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 10:29:23 -0000 Subject: [MacPorts] #16741: py25-setuptools error during deluge install In-Reply-To: <058.e58f597f8a43da9eb982d09a3b4b0e33@macports.org> References: <058.e58f597f8a43da9eb982d09a3b4b0e33@macports.org> Message-ID: <067.1ef8d9e4108330fcfec7b6d261fd1cd6@macports.org> #16741: py25-setuptools error during deluge install -------------------------------------+-------------------------------------- Reporter: ltmayonnaise at gmail.com | Owner: stechert at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: deluge py25-setuptools error Port: py25-setuptools | -------------------------------------+-------------------------------------- Comment(by ltmayonnaise at gmail.com): Man, I would have never got that. Your guess was right, a corrupt python install. I removed the python25 port and all of it's dependencies, reinstalled it and all is fine with py25-setuptools. Now I've got a deluge build error, but that's a different story. Thanks for the reply, this ticket should be marked closed/invalid. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 03:56:41 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 10:56:41 -0000 Subject: [MacPorts] #16768: beanshell-2.0b4 Portfile won't work with trunk (patch included) Message-ID: <059.6ee724d3ab52d9a4fcf238a4bc987781@macports.org> #16768: beanshell-2.0b4 Portfile won't work with trunk (patch included) -------------------------------------+-------------------------------------- Reporter: macports at mail.taugt.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: beanshell -------------------------------------+-------------------------------------- put "cd" inside "system" call -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 04:03:50 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 11:03:50 -0000 Subject: [MacPorts] #16769: Incorrect checksum for Postgis 1.3.3 Message-ID: <054.7f49fb37cd870941ead9441ba6afb5fa@macports.org> #16769: Incorrect checksum for Postgis 1.3.3 --------------------------------+------------------------------------------- Reporter: terhorst at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: postgis --------------------------------+------------------------------------------- The Portfile checksum is incorrect for postgis-1.3.3.tar.gz. The correct checksum (sha1) is: 96342effdf6fd79e8deb148916cd3f97724ddd4d -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 04:43:52 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 11:43:52 -0000 Subject: [MacPorts] #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) Message-ID: <054.964f5b38de5f4381bb46c34f4a446dec@macports.org> #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: protobuf-cpp --------------------------------+------------------------------------------- Upgrade devel/protobuf-cpp 2.0.1 to latest 2.0.2. Also added variant py25 for local python2.5 installation. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 04:48:50 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 11:48:50 -0000 Subject: [MacPorts] #16771: py25-protobuf-2.0.2 (New port) Message-ID: <054.0b5c9999ea631622186bd9d0cbacb713@macports.org> #16771: py25-protobuf-2.0.2 (New port) --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | Port: py25-protobuf --------------------------------+------------------------------------------- New port - py25-protobuf-2.0.2 (complements to protobuf-cpp-2.0.2) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 06:28:53 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 13:28:53 -0000 Subject: [MacPorts] #15909: freetype 2.3.7 / php5 5.2.6 - PHP imagettftext broken In-Reply-To: <051.b0d252d6daf3e066f5f1afbd0e4507b7@macports.org> References: <051.b0d252d6daf3e066f5f1afbd0e4507b7@macports.org> Message-ID: <060.e8189817e7e99782d86836f14aa8656d@macports.org> #15909: freetype 2.3.7 / php5 5.2.6 - PHP imagettftext broken ------------------------------+--------------------------------------------- Reporter: philip at jocks.to | Owner: ryandesign at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: php5 freetype imagettftext gd2 ------------------------------+--------------------------------------------- Comment(by simon at simonwheatley.co.uk): I've just got stuck on this bug (and taken several hours to realise it was OSX/MacPorts related rather than either my code or PHP more generally). Any plans for fixing it, or are we waiting on some OS change? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 06:35:04 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 13:35:04 -0000 Subject: [MacPorts] #16772: gnome-desktop 2.24.0 build failure Message-ID: <055.3d7b3d9b9e942cba347c16095a507431@macports.org> #16772: gnome-desktop 2.24.0 build failure ---------------------------------+------------------------------------------ Reporter: d.fabisch at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ---------------------------------+------------------------------------------ During installation of gnu-cash the error occurred: I tried to install gnome-desktop separately: {{{ linus:~ dirkf$ sudo port install gnome-desktop ---> Fetching gnome-desktop ---> Verifying checksum(s) for gnome-desktop ---> Extracting gnome-desktop ---> Configuring gnome-desktop ---> Building gnome-desktop with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_gnome_gnome-desktop/work/gnome-desktop-2.24.0" && make all " returned error 2 Command output: mv -f .deps/edid-parse.Tpo .deps/edid-parse.Plo /bin/sh ../libtool --tag=CC --mode=link /usr/bin/gcc-4.0 -O2 -version- info 9:3:2 -no-undefined -L/opt/local/lib -o libgnome-desktop-2.la -rpath /opt/local/lib gnome-desktop-item.lo gnome-ditem-edit.lo gnome-hint.lo gnome-bg.lo display-name.lo gnome-rr.lo gnome-rr-config.lo gnome-rr- labeler.lo edid-parse.lo -lSM -lICE -L/usr/X11/lib -R/usr/X11/lib -lX11 -lXrandr -Wl,-framework,CoreServices -Wl,-framework,ApplicationServices -R/usr/X11/lib -Wl,-framework,CoreAudio -L/opt/local/lib -L/usr/X11R6/lib -L/usr/X11/lib -lgnomeui-2 -lgnome-keyring -lbonoboui-2 -lxml2 -lpthread -lgnomecanvas-2 -lgnome-2 -lpopt -lgnomevfs-2 -lesd -lbonobo-2 -laudiofile -lbonobo-activation -lgailutil -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lcairo -lSM -lICE -lpangoft2-1.0 -lpixman-1 -lpng12 -lXrender -lX11 -lpango-1.0 -lfontconfig -lexpat -lfreetype -lz -lgconf-2 -lORBit-2 -lm -ldbus-1 -lgmodule-2.0 -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lintl -liconv -lstartup- notification-1 /usr/bin/gcc-4.0 -dynamiclib -o .libs/libgnome-desktop-2.7.2.3.dylib .libs/gnome-desktop-item.o .libs/gnome-ditem-edit.o .libs/gnome-hint.o .libs/gnome-bg.o .libs/display-name.o .libs/gnome-rr.o .libs/gnome-rr- config.o .libs/gnome-rr-labeler.o .libs/edid-parse.o -L/opt/local/lib -L/usr/X11/lib /usr/X11/lib/libXrandr.2.1.0.dylib /usr/X11/lib/libXext.6.4.0.dylib /usr/X11/lib/libXrender.1.3.0.dylib /usr/X11/lib/libXau.6.0.0.dylib /usr/X11/lib/libXdmcp.6.0.0.dylib -L/usr/X11R6/lib /opt/local/lib/libgnomeui-2.dylib /usr/X11/lib/libXi.6.0.0.dylib /usr/X11/lib/libXinerama.1.0.0.dylib /opt/local/lib/libtiff.dylib /opt/local/lib/libjasper.dylib /opt/local/lib/libjpeg.dylib /opt/local/lib/libORBitCosNaming-2.dylib /opt/local/lib/libssl.dylib /opt/local/lib/libcrypto.dylib /opt/local/lib/libz.dylib /opt/local/lib/libdbus-glib-1.dylib /opt/local/lib/libgnome-keyring.dylib /opt/local/lib/libbonoboui-2.dylib /opt/local/lib/libxml2.dylib -lpthread /opt/local/lib/libgnomecanvas-2.dylib /opt/local/lib/libgnome-2.dylib /opt/local/lib/libpopt.dylib /opt/local/lib/libgnomevfs-2.dylib /opt/local/lib/libesd.dylib /opt/local/lib/libbonobo-2.dylib /opt/local/lib/libaudiofile.dylib /opt/local/lib/libbonobo- activation.dylib /opt/local/lib/libgailutil.dylib /opt/local/lib/libart_lgpl_2.dylib /opt/local/lib/libgtk-x11-2.0.dylib /opt/local/lib/libgdk-x11-2.0.dylib /opt/local/lib/libatk-1.0.dylib /opt/local/lib/libgio-2.0.dylib /opt/local/lib/libgdk_pixbuf-2.0.dylib /opt/local/lib/libpangocairo-1.0.dylib /opt/local/lib/libcairo.dylib /usr/X11/lib/libSM.6.0.0.dylib /usr/X11/lib/libICE.6.3.0.dylib /opt/local/lib/libpangoft2-1.0.dylib /opt/local/lib/libpixman-1.dylib /opt/local/lib/libpng12.dylib /opt/local/lib/libXrender.dylib /usr/X11/lib/libX11.6.2.0.dylib /opt/local/lib/libpango-1.0.dylib /opt/local/lib/libfontconfig.dylib /opt/local/lib/libexpat.dylib /opt/local/lib/libfreetype.dylib -lz /opt/local/lib/libgconf-2.dylib /opt/local/lib/libORBit-2.dylib -lm /opt/local/lib/libdbus-1.dylib /opt/local/lib/libgmodule-2.0.dylib /opt/local/lib/libgthread-2.0.dylib /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib /opt/local/lib /libstartup-notification-1.dylib -Wl,-framework -Wl,CoreServices -Wl,-framework -Wl,ApplicationServices -Wl,-framework -Wl,CoreAudio -install_name /opt/local/lib/libgnome-desktop-2.7.dylib -compatibility_version 10 -current_version 10.3 -Wl,-single_module Undefined symbols: "_XRRGetOutputProperty", referenced from: _screen_info_new in gnome-rr.o "_XRRGetScreenSizeRange", referenced from: _screen_info_new in gnome-rr.o "_XRRGetScreenResources", referenced from: _screen_info_new in gnome-rr.o "_XRRSetScreenSize", referenced from: _gnome_rr_screen_set_size in gnome-rr.o "_XRRGetOutputInfo", referenced from: _screen_info_new in gnome-rr.o "_XRRFreeScreenResources", referenced from: _screen_info_free in gnome-rr.o "_XRRFreeOutputInfo", referenced from: _screen_info_new in gnome-rr.o "_XRRSetCrtcConfig", referenced from: _gnome_rr_crtc_set_config in gnome-rr.o "_XRRFreeCrtcInfo", referenced from: _screen_info_new in gnome-rr.o "_XRRGetCrtcInfo", referenced from: _screen_info_new in gnome-rr.o ld: symbol(s) not found collect2: ld returned 1 exit status make[3]: *** [libgnome-desktop-2.la] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 07:13:55 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 14:13:55 -0000 Subject: [MacPorts] #16767: py25-libxml2 checksum error In-Reply-To: <058.39ab1fdae5ee50b6a80d9e1170366f9e@macports.org> References: <058.39ab1fdae5ee50b6a80d9e1170366f9e@macports.org> Message-ID: <067.c6292e87a980a0b99b40c6e9586096ae@macports.org> #16767: py25-libxml2 checksum error -------------------------------------+-------------------------------------- Reporter: mvanier at cs.caltech.edu | Owner: sfiera at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: py25-libxml2 | -------------------------------------+-------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => sfiera at macports.org * priority: High => Normal * port: => py25-libxml2 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 07:19:17 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 14:19:17 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.c4463029a827925ee3c47fedf4aaa4a3@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by macsforever2000 at macports.org): This is the Tcl bug again. Once again: {{{ sudo port clean py25-zlib sudo port install gnucash }}} If it stops again, do the same with the last port that tries to build. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 07:21:18 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 14:21:18 -0000 Subject: [MacPorts] #16768: beanshell-2.0b4 Portfile won't work with trunk (patch included) In-Reply-To: <059.6ee724d3ab52d9a4fcf238a4bc987781@macports.org> References: <059.6ee724d3ab52d9a4fcf238a4bc987781@macports.org> Message-ID: <068.33bc0c1d4dcef8935524c8bcd0de091f@macports.org> #16768: beanshell-2.0b4 Portfile won't work with trunk (patch included) --------------------------------------+------------------------------------- Reporter: macports at mail.taugt.net | Owner: blair at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: beanshell | --------------------------------------+------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => blair at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 07:22:32 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 14:22:32 -0000 Subject: [MacPorts] #16769: Incorrect checksum for Postgis 1.3.3 In-Reply-To: <054.7f49fb37cd870941ead9441ba6afb5fa@macports.org> References: <054.7f49fb37cd870941ead9441ba6afb5fa@macports.org> Message-ID: <063.78d897414c7638c7d5263f35f06a82e8@macports.org> #16769: Incorrect checksum for Postgis 1.3.3 ---------------------------------+------------------------------------------ Reporter: terhorst at gmail.com | Owner: frank-lists at auroralux.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: postgis | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => frank- lists at auroralux.net Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 07:23:20 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 14:23:20 -0000 Subject: [MacPorts] #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) In-Reply-To: <054.964f5b38de5f4381bb46c34f4a446dec@macports.org> References: <054.964f5b38de5f4381bb46c34f4a446dec@macports.org> Message-ID: <063.5ce2a9ff1bfba8f190ad916e3b49169a@macports.org> #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) ---------------------------------+------------------------------------------ Reporter: stromnov at gmail.com | Owner: blair at macports.or Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: protobuf-cpp | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => blair at macports.or Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 07:23:36 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 14:23:36 -0000 Subject: [MacPorts] #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) In-Reply-To: <054.964f5b38de5f4381bb46c34f4a446dec@macports.org> References: <054.964f5b38de5f4381bb46c34f4a446dec@macports.org> Message-ID: <063.6bc5b493a8b698f6bbc4127749706051@macports.org> #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) ---------------------------------+------------------------------------------ Reporter: stromnov at gmail.com | Owner: blair at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: protobuf-cpp | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: blair at macports.or => blair at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 08:11:20 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 15:11:20 -0000 Subject: [MacPorts] #16126: bonniexx-1.93c Portfile patch In-Reply-To: <053.3ce415c805a57709e31bb18e6fd99756@macports.org> References: <053.3ce415c805a57709e31bb18e6fd99756@macports.org> Message-ID: <062.bedfaae4c71116603c6e1430058c9e7c@macports.org> #16126: bonniexx-1.93c Portfile patch --------------------------------+------------------------------------------- Reporter: giorgio_v at mac.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: bonniexx | --------------------------------+------------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned * port: => bonniexx Comment: Maintainer timeout. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 08:12:10 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 15:12:10 -0000 Subject: [MacPorts] #16126: bonniexx-1.93c Portfile patch In-Reply-To: <053.3ce415c805a57709e31bb18e6fd99756@macports.org> References: <053.3ce415c805a57709e31bb18e6fd99756@macports.org> Message-ID: <062.5ef9a118d7aec02417bc8982708e9189@macports.org> #16126: bonniexx-1.93c Portfile patch --------------------------------+------------------------------------------- Reporter: giorgio_v at mac.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: bonniexx | --------------------------------+------------------------------------------- Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40538. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 08:16:23 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 15:16:23 -0000 Subject: [MacPorts] #15166: textproc/meld 1.1.4 scrollkeeper error while building In-Reply-To: <058.15ffe5f0265f0d76b07bff9af0a8a719@macports.org> References: <058.15ffe5f0265f0d76b07bff9af0a8a719@macports.org> Message-ID: <067.027bce8e2aa56289ccff6f583c2da5d7@macports.org> #15166: textproc/meld 1.1.4 scrollkeeper error while building -------------------------------------+-------------------------------------- Reporter: jan.matousek at gmail.com | Owner: landonf at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: scrollkeeper Port: meld | -------------------------------------+-------------------------------------- Changes (by macsforever2000 at macports.org): * keywords: meld scrollkeeper => scrollkeeper * port: => meld -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 08:19:16 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 15:19:16 -0000 Subject: [MacPorts] #16150: OpenMPI won't install on MacBook Pro (Leopard 10.5.4) In-Reply-To: <057.d17b4a028ece3759358aa8dba0b745e7@macports.org> References: <057.d17b4a028ece3759358aa8dba0b745e7@macports.org> Message-ID: <066.db432519d513451206309c5dd675a4c9@macports.org> #16150: OpenMPI won't install on MacBook Pro (Leopard 10.5.4) ------------------------------------+--------------------------------------- Reporter: beany_kelly at yahoo.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: Port: openmpi | ------------------------------------+--------------------------------------- Changes (by macsforever2000 at macports.org): * port: => openmpi Old description: > Hi. This is basically identical to Ticket #14968, apart from two facts -- > my OS version is slightly newer, and I've tried installing with and > without the variant +gcc43. Since the only remarks I see on that ticket > are that someone got the installation to work by compiling with the > +gcc43 variant. > > Specifics: My machine is an Intel MacBook Pro with Leopard 10.4, and I > just updated XCode to version 3.1. > > ------------------------- screen output follows > ----------------------------------- > > liffey:~ bkelly$ sudo port install openmpi +gcc43 > Password: > ---> Building openmpi with target all > Error: Target org.macports.build returned: shell command " cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/build" > && make all " returned error 2 > Command output: ../../../../../../../ompi/include/mpi.h:1466: error: > previous declaration of 'PMPI_File_write_ordered_end' was here > /opt/local/include/mpio.h:387: error: conflicting types for > 'PMPI_File_get_type_extent' > ../../../../../../../ompi/include/mpi.h:1468: error: previous declaration > of 'PMPI_File_get_type_extent' was here > /opt/local/include/mpio.h:397: error: conflicting types for > 'PMPI_File_set_atomicity' > ../../../../../../../ompi/include/mpi.h:1469: error: previous declaration > of 'PMPI_File_set_atomicity' was here > /opt/local/include/mpio.h:398: error: conflicting types for > 'PMPI_File_get_atomicity' > ../../../../../../../ompi/include/mpi.h:1470: error: previous declaration > of 'PMPI_File_get_atomicity' was here > /opt/local/include/mpio.h:399: error: conflicting types for > 'PMPI_File_sync' > ../../../../../../../ompi/include/mpi.h:1471: error: previous declaration > of 'PMPI_File_sync' was here > /opt/local/include/mpio.h:404: error: conflicting types for > 'PMPI_File_set_errhandler' > ../../../../../../../ompi/include/mpi.h:1389: error: previous declaration > of 'PMPI_File_set_errhandler' was here > /opt/local/include/mpio.h:405: error: conflicting types for > 'PMPI_File_get_errhandler' > ../../../../../../../ompi/include/mpi.h:1390: error: previous declaration > of 'PMPI_File_get_errhandler' was here > /opt/local/include/mpio.h:419: error: conflicting types for > 'PMPI_File_f2c' > ../../../../../../../ompi/include/mpi.h:1385: error: previous declaration > of 'PMPI_File_f2c' was here > /opt/local/include/mpio.h:420: error: conflicting types for > 'PMPI_File_c2f' > ../../../../../../../ompi/include/mpi.h:1384: error: previous declaration > of 'PMPI_File_c2f' was here > /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c: > In function 'mca_io_romio_dist_ADIOI_Calc_others_req': > /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:412: > warning: passing argument 7 of 'PMPI_Irecv' from incompatible pointer > type > /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:415: > warning: passing argument 7 of 'PMPI_Irecv' from incompatible pointer > type > /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:424: > warning: passing argument 7 of 'PMPI_Isend' from incompatible pointer > type > /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:427: > warning: passing argument 7 of 'PMPI_Isend' from incompatible pointer > type > /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:437: > warning: passing argument 2 of 'PMPI_Waitall' from incompatible pointer > type > /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:438: > warning: passing argument 2 of 'PMPI_Waitall' from incompatible pointer > type > make[5]: *** [io_romio_ad_aggregate.lo] Error 1 > make[4]: *** [all-recursive] Error 1 > make[3]: *** [all-recursive] Error 1 > make[2]: *** [all-recursive] Error 1 > make[1]: *** [all-recursive] Error 1 > make: *** [all-recursive] Error 1 > > Error: Status 1 encountered during processing. New description: Hi. This is basically identical to Ticket #14968, apart from two facts -- my OS version is slightly newer, and I've tried installing with and without the variant +gcc43. Since the only remarks I see on that ticket are that someone got the installation to work by compiling with the +gcc43 variant. Specifics: My machine is an Intel MacBook Pro with Leopard 10.4, and I just updated XCode to version 3.1. ------------------------- screen output follows ----------------------------------- {{{ liffey:~ bkelly$ sudo port install openmpi +gcc43 Password: ---> Building openmpi with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/build" && make all " returned error 2 Command output: ../../../../../../../ompi/include/mpi.h:1466: error: previous declaration of 'PMPI_File_write_ordered_end' was here /opt/local/include/mpio.h:387: error: conflicting types for 'PMPI_File_get_type_extent' ../../../../../../../ompi/include/mpi.h:1468: error: previous declaration of 'PMPI_File_get_type_extent' was here /opt/local/include/mpio.h:397: error: conflicting types for 'PMPI_File_set_atomicity' ../../../../../../../ompi/include/mpi.h:1469: error: previous declaration of 'PMPI_File_set_atomicity' was here /opt/local/include/mpio.h:398: error: conflicting types for 'PMPI_File_get_atomicity' ../../../../../../../ompi/include/mpi.h:1470: error: previous declaration of 'PMPI_File_get_atomicity' was here /opt/local/include/mpio.h:399: error: conflicting types for 'PMPI_File_sync' ../../../../../../../ompi/include/mpi.h:1471: error: previous declaration of 'PMPI_File_sync' was here /opt/local/include/mpio.h:404: error: conflicting types for 'PMPI_File_set_errhandler' ../../../../../../../ompi/include/mpi.h:1389: error: previous declaration of 'PMPI_File_set_errhandler' was here /opt/local/include/mpio.h:405: error: conflicting types for 'PMPI_File_get_errhandler' ../../../../../../../ompi/include/mpi.h:1390: error: previous declaration of 'PMPI_File_get_errhandler' was here /opt/local/include/mpio.h:419: error: conflicting types for 'PMPI_File_f2c' ../../../../../../../ompi/include/mpi.h:1385: error: previous declaration of 'PMPI_File_f2c' was here /opt/local/include/mpio.h:420: error: conflicting types for 'PMPI_File_c2f' ../../../../../../../ompi/include/mpi.h:1384: error: previous declaration of 'PMPI_File_c2f' was here /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c: In function 'mca_io_romio_dist_ADIOI_Calc_others_req': /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:412: warning: passing argument 7 of 'PMPI_Irecv' from incompatible pointer type /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:415: warning: passing argument 7 of 'PMPI_Irecv' from incompatible pointer type /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:424: warning: passing argument 7 of 'PMPI_Isend' from incompatible pointer type /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:427: warning: passing argument 7 of 'PMPI_Isend' from incompatible pointer type /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:437: warning: passing argument 2 of 'PMPI_Waitall' from incompatible pointer type /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_openmpi/work/openmpi-1.2.6/ompi/mca/io/romio/romio/adio/common/io_romio_ad_aggregate.c:438: warning: passing argument 2 of 'PMPI_Waitall' from incompatible pointer type make[5]: *** [io_romio_ad_aggregate.lo] Error 1 make[4]: *** [all-recursive] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all-recursive] Error 1 Error: Status 1 encountered during processing. }}} -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 08:25:52 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 15:25:52 -0000 Subject: [MacPorts] #13401: git-core with +svn produces a git-svn that uses the wrong perl binary In-Reply-To: <055.3b7fee75e68a29891e6b87d0c7b98431@macports.org> References: <055.3b7fee75e68a29891e6b87d0c7b98431@macports.org> Message-ID: <064.a83a6e80c9ebbdb0ebcf34c05aa4a635@macports.org> #13401: git-core with +svn produces a git-svn that uses the wrong perl binary ----------------------------------+----------------------------------------- Reporter: tim.stoop at gmail.com | Owner: bryan at larsen.st Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: git-svn git-core perl Port: | ----------------------------------+----------------------------------------- Comment(by dbueno at gmail.com): I also have this problem -- The first line of /opt/local/libexec/git-core /git-svn refers explicitly to /usr/bin/perl, which is what I think is the cause. I'm running MacPorts 1.600. {{{ $ echo $PATH /Users/denbuen/bin:/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/texbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/sbin:/bin:/Users/denbuen/apps/ocaml/bin:/Users/denbuen/.cabal/bin:/Users/Shared/apps:/Users/Shared/app $ which perl /opt/local/bin/perl }}} Incidentally, I have just reinstalled MacPorts by removing /opt and starting from the MacPorts disk image. The only command I typed before I got the symptom this ticket reports was: {{{ sudo port install git-core @1.6.0.2_0+bash_completion+doc+gitweb+svn }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 08:40:56 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 15:40:56 -0000 Subject: [MacPorts] #16721: help2man-1.36.4 add support for universal builds In-Reply-To: <052.b4747ae2607f597961f3c1cd89b090a1@macports.org> References: <052.b4747ae2607f597961f3c1cd89b090a1@macports.org> Message-ID: <061.a901ca13c800e6d17dcc5bd768f65c7c@macports.org> #16721: help2man-1.36.4 add support for universal builds -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macsforever2000 at macports.org Type: enhancement | Status: assigned Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: help2man | -------------------------------+-------------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 08:42:08 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 15:42:08 -0000 Subject: [MacPorts] #16721: help2man-1.36.4 add support for universal builds In-Reply-To: <052.b4747ae2607f597961f3c1cd89b090a1@macports.org> References: <052.b4747ae2607f597961f3c1cd89b090a1@macports.org> Message-ID: <061.bb50a5a004297094575257865dfe5b09@macports.org> #16721: help2man-1.36.4 add support for universal builds -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: help2man | -------------------------------+-------------------------------------------- Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40540. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 08:58:52 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 15:58:52 -0000 Subject: [MacPorts] #16592: hmake build failure In-Reply-To: <054.42a25bafb85f43eac535d2f58f3b31e6@macports.org> References: <054.42a25bafb85f43eac535d2f58f3b31e6@macports.org> Message-ID: <063.5bc5fa80472ba6a91a48fdf853df728c@macports.org> #16592: hmake build failure ---------------------------------+------------------------------------------ Reporter: rogpeppe at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: invalid | Keywords: Port: hmake | ---------------------------------+------------------------------------------ Comment(by joseph.bruce at pnl.gov): I'm getting the same error, even after syncing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 09:25:43 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 16:25:43 -0000 Subject: [MacPorts] #13244: clisp does not build on 10.5 MacBook Pro; fails with "CPPFLAGS has changed" In-Reply-To: <057.b0da6cdf02707a464ea583930a0bc20d@macports.org> References: <057.b0da6cdf02707a464ea583930a0bc20d@macports.org> Message-ID: <066.159c79ec7a15e86660c1e21fb2a127a6@macports.org> #13244: clisp does not build on 10.5 MacBook Pro; fails with "CPPFLAGS has changed" ------------------------------------+--------------------------------------- Reporter: jaroom at mindspring.com | Owner: eridius at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.0 Resolution: | Keywords: clisp ------------------------------------+--------------------------------------- Comment(by captsolo at gmail.com): Can confirm the same bug (error: `CPPFLAGS' has changed since the previous run). clisp: 2.43 MacPorts: 1.6.0 OS X: 10.5.4 However, this error only appears if the libsigsegv 2.5 port (which clisp depends on) was installed on the same go. Or if retrying installing clicp after this error happened, without doing "port clean". Would be good to get this fixed, but for now there are a couple of ways to work around it: a) install libsigsegv separately, then install clisp b) if the error occured already, do "port clean --all clisp" and try to install it again -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 09:26:46 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 16:26:46 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.93b91c7a539f08140ffe8bf6c89954ab@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:8 simon@?]: > I just tried building it on Mac OS X 10.4.11 Intel and got the following error. I have no idea why this is happening: > > {{{ > (cd .libs && rm -f subtract.la && ln -s ../subtract.la subtract.la) > /bin/sh ../../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/babl-0.0 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -I. -I../.. -I../.. -I../../gegl -I../../gegl/buffer -I../../gegl/operation -I../../gegl/property-types -I../../gegl/module -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -c -o svg-multiply.la.lo svg-multiply.c > /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/babl-0.0 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -I. -I../.. -I../.. -I../../gegl -I../../gegl/buffer -I../../gegl/operation -I../../gegl/property-types -I../../gegl/module -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -c svg-multiply.c -fno-common -DPIC -o .libs/svg-multiply.la.o > /bin/sh ../../libtool --tag=CC --mode=link /usr/bin/gcc-4.0 -avoid- version -export-dynamic -module -L/opt/local/lib -O2 -Wall -Wdeclaration- after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -L/opt/local/lib -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -lintl -liconv -o svg-multiply.la -rpath /opt/local/lib/gegl-0.0 svg- multiply.la.lo > /usr/bin/gcc-4.0 ${wl}-undefined ${wl}dynamic_lookup -o .libs/svg- multiply.so -bundle .libs/svg-multiply.la.o -L/opt/local/lib /opt/local/lib/libgio-2.0.dylib /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/libgmodule-2.0.dylib /opt/local/lib/libgthread-2.0.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -mmmx -msse > dsymutil .libs/svg-multiply.so || : > ERROR: No debug map or DWARF data was found to link.creating svg- multiply.la > (cd .libs && rm -f svg-multiply.la && ln -s ../svg-multiply.la svg- multiply.la) > /bin/sh ../../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/babl-0.0 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -I. -I../.. -I../.. -I../../gegl -I../../gegl/buffer -I../../gegl/operation -I../../gegl/property-types -I../../gegl/module -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -c -o xor.la.lo xor.c > /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/babl-0.0 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -I. -I../.. -I../.. -I../../gegl -I../../gegl/buffer -I../../gegl/operation -I../../gegl/property-types -I../../gegl/module -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -c xor.c -fno-common -DPIC -o .libs/xor.la.o > /bin/sh ../../libtool --tag=CC --mode=link /usr/bin/gcc-4.0 -avoid- version -export-dynamic -module -L/opt/local/lib -O2 -Wall -Wdeclaration- after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -L/opt/local/lib -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -lintl -liconv -o xor.la -rpath /opt/local/lib/gegl-0.0 xor.la.lo > /usr/bin/gcc-4.0 ${wl}-undefined ${wl}dynamic_lookup -o .libs/xor.so -bundle .libs/xor.la.o -L/opt/local/lib /opt/local/lib/libgio-2.0.dylib /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/libgmodule-2.0.dylib /opt/local/lib/libgthread-2.0.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -mmmx -msse > dsymutil .libs/xor.so || : > ERROR: No debug map or DWARF data was found to link.creating xor.la > (cd .libs && rm -f xor.la && ln -s ../xor.la xor.la) > make[3]: Nothing to be done for `all-am'. > Making all in bin > if /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../gegl -I../gegl/buffer -I../gegl/property-types -I../gegl/buffer -I../gegl/operation -I../gegl/module -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/babl-0.0 -I/opt/local/include/libpng12 -I/opt/local/include -DG_DISABLE_SINGLE_INCLUDES -O2 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -mmmx -msse -MT gegl.o -MD -MP -MF ".deps/gegl.Tpo" -c -o gegl.o gegl.c; \ > then mv -f ".deps/gegl.Tpo" ".deps/gegl.Po"; else rm -f ".deps/gegl.Tpo"; exit 1; fi > In file included from /opt/local/include/gtk-2.0/gdk/gdkspawn.h:26, > from /opt/local/include/gtk-2.0/gdk/gdk.h:52, > from /opt/local/include/gtk-2.0/gtk/gtk.h:31, > from gegl.c:43: > /opt/local/include/glib-2.0/glib/gspawn.h:22:2: error: #error "Only can be included directly." > make[2]: *** [gegl.o] Error 1 > make[1]: *** [all-recursive] Error 1 > make: *** [all] Error 2 > }}} > > Thanks, > > Simon Simon, Would you please verify that you have the latest version gtk2 and glib2 installed? In my version (gdk_spawn.h) no longer includes glib/gspawn.h. Looks like they have reorganized things to make sure that no single file under glib is included, only glib/glib.h and have turned on GLIB_DISABLE_SINGLE_INCLUDES to enforce it with this error. I can't reproduce this error on 10.4.11 ppc. (my versions are gtk2 @2.14.3_2+x11 and glib2 @2.18.1_0). Here's where it was removed: [http://svn.gnome.org/viewvc/gtk%2B/trunk/gdk/gdkspawn.h?r1=9198&r2=19877] Dave -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 09:59:24 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 16:59:24 -0000 Subject: [MacPorts] #16746: python/py25-pygments 0.11.1 In-Reply-To: <059.3d583d461c788568f63c508ae32e0195@macports.org> References: <059.3d583d461c788568f63c508ae32e0195@macports.org> Message-ID: <068.ac17bdbf5361f8571bdbaebc12f4c57c@macports.org> #16746: python/py25-pygments 0.11.1 --------------------------------------+------------------------------------- Reporter: arthur at arthurkoziel.com | Owner: erickt at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: pygments Port: py25-pygments | --------------------------------------+------------------------------------- Changes (by macsforever2000 at macports.org): * cc: erickt at macports.org (removed) * owner: macports-tickets at lists.macosforge.org => erickt at macports.org * port: => py25-pygments -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 10:04:08 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 17:04:08 -0000 Subject: [MacPorts] #16741: py25-setuptools error during deluge install In-Reply-To: <058.e58f597f8a43da9eb982d09a3b4b0e33@macports.org> References: <058.e58f597f8a43da9eb982d09a3b4b0e33@macports.org> Message-ID: <067.b7aaf83b7220179444427d8027139700@macports.org> #16741: py25-setuptools error during deluge install -------------------------------------+-------------------------------------- Reporter: ltmayonnaise at gmail.com | Owner: stechert at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: invalid | Keywords: deluge py25-setuptools error Port: py25-setuptools | -------------------------------------+-------------------------------------- Changes (by stechert at macports.org): * status: assigned => closed * resolution: => invalid -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 10:53:19 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 17:53:19 -0000 Subject: [MacPorts] #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) In-Reply-To: <054.964f5b38de5f4381bb46c34f4a446dec@macports.org> References: <054.964f5b38de5f4381bb46c34f4a446dec@macports.org> Message-ID: <063.3522087a81382882f0848d91dd4cf1cb@macports.org> #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) ---------------------------------+------------------------------------------ Reporter: stromnov at gmail.com | Owner: blair at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: protobuf-cpp | ---------------------------------+------------------------------------------ Changes (by blair at macports.org): * status: new => closed * resolution: => fixed Comment: Thanks for the patch. Upgraded to 2.0.2 in r40541. However, I don't think we need the py25 variants work, so I left that out. From my experience, the protoc generated Python files are always imported into another script which can specify the Python version to use at the top of the file. If you need Python support, you could write a protobuf-py and protobuf-py25 module that would install the Python protobuf files into Python 2.4 and 2.5 and I could check that into svn. Closing as fixed, feel free to comment on this and we'll reopen the ticket if something else needs to be done to the port. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 12:17:06 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 19:17:06 -0000 Subject: [MacPorts] #16768: beanshell-2.0b4 Portfile won't work with trunk (patch included) In-Reply-To: <059.6ee724d3ab52d9a4fcf238a4bc987781@macports.org> References: <059.6ee724d3ab52d9a4fcf238a4bc987781@macports.org> Message-ID: <068.993bf8dd0fb7d2aaa252f5795eb84aef@macports.org> #16768: beanshell-2.0b4 Portfile won't work with trunk (patch included) --------------------------------------+------------------------------------- Reporter: macports at mail.taugt.net | Owner: blair at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: beanshell | --------------------------------------+------------------------------------- Changes (by blair at macports.org): * status: new => closed * resolution: => fixed Comment: Thanks, fixed in r40545, changing the ; to &&. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 12:19:36 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 19:19:36 -0000 Subject: [MacPorts] #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) In-Reply-To: <054.964f5b38de5f4381bb46c34f4a446dec@macports.org> References: <054.964f5b38de5f4381bb46c34f4a446dec@macports.org> Message-ID: <063.cd4ea05fddf54bc844683e9f6e8ddacd@macports.org> #16770: protobuf-cpp-2.0.2 (upgrade from 2.0.1) ---------------------------------+------------------------------------------ Reporter: stromnov at gmail.com | Owner: blair at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: protobuf-cpp | ---------------------------------+------------------------------------------ Comment(by stromnov at gmail.com): Thanks! PS. py25-protobuf implemented in new port ticket #16771. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 12:23:56 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 19:23:56 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.400b669865965e4d5da1007001846cf0@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:6 myschizobuddy@?]: > Tested and verified on Mac OSX Leopard 10.5.5 intel > > 123 dependent ports were installed for gimp 2.6. > you should also update gimp.app port as well > > thanks for the effort And thanks for your testing support and perseverance in getting through this build. The current gimp-app (2.4.0_0) works as is with gimp2-2.6.0. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 12:24:40 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 19:24:40 -0000 Subject: [MacPorts] #16771: py25-protobuf-2.0.2 (New port) In-Reply-To: <054.0b5c9999ea631622186bd9d0cbacb713@macports.org> References: <054.0b5c9999ea631622186bd9d0cbacb713@macports.org> Message-ID: <063.33251d18029daed8a723a9684aefbe48@macports.org> #16771: py25-protobuf-2.0.2 (New port) ---------------------------------+------------------------------------------ Reporter: stromnov at gmail.com | Owner: blair at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: py25-protobuf | ---------------------------------+------------------------------------------ Changes (by blair at macports.org): * owner: macports-tickets at lists.macosforge.org => blair at macports.org * status: new => assigned Comment: Looking at now. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 13:03:34 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 20:03:34 -0000 Subject: [MacPorts] #16772: gnome-desktop 2.24.0 build failure In-Reply-To: <055.3d7b3d9b9e942cba347c16095a507431@macports.org> References: <055.3d7b3d9b9e942cba347c16095a507431@macports.org> Message-ID: <064.70d334fc46fdb615c829d1729c6bf2a8@macports.org> #16772: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: d.fabisch at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by blb at macports.org): Are you running 10.4 or 10.5? If 10.4, may be related to/same thing as #16720. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 13:19:02 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 20:19:02 -0000 Subject: [MacPorts] #16773: glade 2.12.2 build failure Message-ID: <054.5c86b313d13b231fbb9e9cab4cbd027f@macports.org> #16773: glade 2.12.2 build failure --------------------------------+------------------------------------------- Reporter: kschombu at cisco.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: glade --------------------------------+------------------------------------------- I get the following when trying to install glade: /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I../.. -DXTHREADS -DORBIT2=1 -D_REENTRANT -I/opt/local/include/libxml2 -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/libgnomeui-2.0 -I/opt/local/include/libart-2.0 -I/opt/local/include/gconf/2 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libgnome-2.0 -I/opt/local/include/libbonoboui-2.0 -I/opt/local/include/libgnomecanvas-2.0 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include -I/opt/local/include/orbit-2.0 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo- activation-2.0 -I/opt/local/include/gail-1.0 -I/opt/local/include -L/opt/local/lib -O2 -MT gbclist.o -MD -MP -MF .deps/gbclist.Tpo -c -o gbclist.o gbclist.c[[BR]] In file included from /opt/local/include/gtk-2.0/gtk/gtk.h:222, from /opt/local/include/gtk-2.0/gtk/gtksignal.h:32, from /opt/local/include/gtk-2.0/gtk/gtkclist.h:34, from gbclist.c:22: /opt/local/include/gtk-2.0/gtk/gtkctree.h:110: error: syntax error before 'GtkCList'[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:110: warning: no semicolon at end of struct or union[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:118: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:119: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:120: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:123: error: syntax error before '}' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:127: error: syntax error before 'GtkCListClass'[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:127: warning: no semicolon at end of struct or union[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:145: error: syntax error before '}' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:149: error: syntax error before 'GtkCListRow'[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:149: warning: no semicolon at end of struct or union[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:162: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:163: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:342: error: syntax error before 'gtk_ctree_node_get_cell_type'[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:344: warning: data definition has no type or storage class[[BR]] make[3]: *** [gbclist.o] Error 1[[BR]] make[2]: *** [all-recursive] Error 1[[BR]] make[1]: *** [all-recursive] Error 1[[BR]] make: *** [all] Error 2[[BR]] -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 13:25:15 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 20:25:15 -0000 Subject: [MacPorts] #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 Message-ID: <058.200a4c670199dbbcda0db661877e8598@macports.org> #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 ------------------------------------+--------------------------------------- Reporter: aetherknight at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ------------------------------------+--------------------------------------- After updating from dbus-1.2.1_0 to dbus-1.2.3_0 on Mac OS X 10.4.11, dbus no longer seems able to run. This problem appears to occur on both Intel and PowerPC Macs. With version 1.2.1_0, running dbus-launch yielded along the lines of {{{ DBUS_SESSION_BUS_ADDRESS=unix:path=/tmp/dbus- E76qJe6mCa,guid=27b56f31090159b15b9b087148ea6f54 DBUS_SESSION_BUS_PID=22167 }}} and the dbus-daemon process can be seen with the ps command. After updating to 1.2.3_0, running dbus-launch prints {{{ Failed to start message bus: Memory allocation failure in message bus EOF in dbus-launch reading address from bus daemon }}} Building dbus @1.2.3_0 in a cleanly installed MacPorts environment does not fix this. This bug causes applications, such as gnucash, to be unable to find their gconf configurations. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 13:43:25 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 20:43:25 -0000 Subject: [MacPorts] #16775: python25: respect applications_dir Message-ID: <052.5f989a452f878f1fbbc6905f77bc339a@macports.org> #16775: python25: respect applications_dir ------------------------------+--------------------------------------------- Reporter: jmr at macports.org | Owner: mww at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: Keywords: | Port: python25 ------------------------------+--------------------------------------------- There is now an applications_dir variable in trunk which should be used instead of hardcoding /Applications/MacPorts. Attached patch makes python25 use it, and falls back to the default if it is not set (as with base versions <= 1.6). Possibly the frameworks_dir variable should also be used, but it defaults to /Library/Frameworks, which is different to what the python ports currently use. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 13:44:44 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 20:44:44 -0000 Subject: [MacPorts] #16773: glade 2.12.2 build failure In-Reply-To: <054.5c86b313d13b231fbb9e9cab4cbd027f@macports.org> References: <054.5c86b313d13b231fbb9e9cab4cbd027f@macports.org> Message-ID: <063.638dd6df491fc3d058c8c7cb9f77ffba@macports.org> #16773: glade 2.12.2 build failure ---------------------------------+------------------------------------------ Reporter: kschombu at cisco.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: glade | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [ticket:16773 kschombu@?]: > I get the following when trying to install glade: > Looks like a problem introduced by the latest version of gtk2. Suggest you try port glade3 instead. This is the latest stable version of glade (3.4.5). The glade 2.x branch is obsolete and is not being actively maintained by the glade developers. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 13:48:34 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 20:48:34 -0000 Subject: [MacPorts] #16776: xchat2-2.8.6 not compatible with gtk2-2.14 Message-ID: <052.c33fe8ad1178e77e5311b5bd513a958f@macports.org> #16776: xchat2-2.8.6 not compatible with gtk2-2.14 ------------------------------+--------------------------------------------- Reporter: blb at macports.org | Owner: afb at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: xchat2 ------------------------------+--------------------------------------------- Looks like gtk2-2.14 breaks compiling xchat2, which now needs to be patched. The patch can be found in the [http://bugs.gentoo.org/show_bug.cgi?id=234458 Gentoo bug] about it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 13:57:37 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 20:57:37 -0000 Subject: [MacPorts] #16765: python26-2.6 numerous improvements In-Reply-To: <052.c31ae2e6632df35e9d37c36704173c45@macports.org> References: <052.c31ae2e6632df35e9d37c36704173c45@macports.org> Message-ID: <061.58a8dc27d7ac82269ba89edbc8db0525@macports.org> #16765: python26-2.6 numerous improvements -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: python26 | -------------------------------+-------------------------------------------- Comment(by blb at macports.org): Replying to [comment:2 myschizobuddy@?]: > how many of these patches can benefit 2.5 as well Some already can be found in tickets against python25 (#9831 and #16111); the applications and frameworks issue is present in 2.5 but has no ticket as yet; the universal option may also be an issue, and the fix here should be the same for 2.5. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 14:28:28 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 21:28:28 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.7c5c6b94e915df2371c41b91a256e488@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Changes (by blb at macports.org): * cc: blb at macports.org (added) Comment: First issue is the set of "breakout" ports, those normally a part of Python but removed for dependency reasons (see ticket #12369). Since those are versioned along with Python itself, and we don't want to be setting version in a variant section, I think they'll have to remain py##- ports unless there's a better way to handle them. Or integrate back into Python and incur the heavy dependencies for them all. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 14:44:55 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 21:44:55 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.ad9b10c22f8a6c89f5ec9b53d9943d17@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by jmr at macports.org): Right, short of resolving #126, I guess there will need to be stuff like this in the portfiles: {{{ foreach v {25 26 30} { if {[variant_isset python${v}]} { depends_lib-append port:py${v}-hashlib } } }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 15:26:34 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 22:26:34 -0000 Subject: [MacPorts] #16773: glade 2.12.2 build failure In-Reply-To: <054.5c86b313d13b231fbb9e9cab4cbd027f@macports.org> References: <054.5c86b313d13b231fbb9e9cab4cbd027f@macports.org> Message-ID: <063.909c4069c9dc5c123d656c276b685090@macports.org> #16773: glade 2.12.2 build failure ---------------------------------+------------------------------------------ Reporter: kschombu at cisco.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: glade | ---------------------------------+------------------------------------------ Description changed by jmr at macports.org: Old description: > I get the following when trying to install glade: > > /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I../.. -DXTHREADS -DORBIT2=1 > -D_REENTRANT -I/opt/local/include/libxml2 -I/opt/local/include/gtk-2.0 > -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 > -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 > -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include > -I/opt/local/include -I/opt/local/include/pixman-1 > -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 > -I/usr/X11R6/include -I/opt/local/include/libgnomeui-2.0 > -I/opt/local/include/libart-2.0 -I/opt/local/include/gconf/2 > -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libgnome-2.0 > -I/opt/local/include/libbonoboui-2.0 > -I/opt/local/include/libgnomecanvas-2.0 -I/opt/local/include/gnome- > vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include > -I/opt/local/include/orbit-2.0 -I/opt/local/include/dbus-1.0 > -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/libbonobo-2.0 > -I/opt/local/include/bonobo-activation-2.0 -I/opt/local/include/gail-1.0 > -I/opt/local/include -L/opt/local/lib -O2 -MT gbclist.o -MD -MP -MF > .deps/gbclist.Tpo -c -o gbclist.o gbclist.c[[BR]] > In file included from /opt/local/include/gtk-2.0/gtk/gtk.h:222, > > from /opt/local/include/gtk-2.0/gtk/gtksignal.h:32, > > from /opt/local/include/gtk-2.0/gtk/gtkclist.h:34, > > from gbclist.c:22: > > /opt/local/include/gtk-2.0/gtk/gtkctree.h:110: error: syntax error before > 'GtkCList'[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:110: warning: no semicolon at > end of struct or union[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:118: error: syntax error before > ':' token[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:119: error: syntax error before > ':' token[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:120: error: syntax error before > ':' token[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:123: error: syntax error before > '}' token[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:127: error: syntax error before > 'GtkCListClass'[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:127: warning: no semicolon at > end of struct or union[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:145: error: syntax error before > '}' token[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:149: error: syntax error before > 'GtkCListRow'[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:149: warning: no semicolon at > end of struct or union[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:162: error: syntax error before > ':' token[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:163: error: syntax error before > ':' token[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:342: error: syntax error before > 'gtk_ctree_node_get_cell_type'[[BR]] > /opt/local/include/gtk-2.0/gtk/gtkctree.h:344: warning: data definition > has no type or storage class[[BR]] > make[3]: *** [gbclist.o] Error 1[[BR]] > make[2]: *** [all-recursive] Error 1[[BR]] > make[1]: *** [all-recursive] Error 1[[BR]] > make: *** [all] Error 2[[BR]] New description: I get the following when trying to install glade: {{{ /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I../.. -DXTHREADS -DORBIT2=1 -D_REENTRANT -I/opt/local/include/libxml2 -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/libgnomeui-2.0 -I/opt/local/include/libart-2.0 -I/opt/local/include/gconf/2 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libgnome-2.0 -I/opt/local/include/libbonoboui-2.0 -I/opt/local/include/libgnomecanvas-2.0 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include -I/opt/local/include/orbit-2.0 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo- activation-2.0 -I/opt/local/include/gail-1.0 -I/opt/local/include -L/opt/local/lib -O2 -MT gbclist.o -MD -MP -MF .deps/gbclist.Tpo -c -o gbclist.o gbclist.c[[BR]] In file included from /opt/local/include/gtk-2.0/gtk/gtk.h:222, from /opt/local/include/gtk-2.0/gtk/gtksignal.h:32, from /opt/local/include/gtk-2.0/gtk/gtkclist.h:34, from gbclist.c:22: /opt/local/include/gtk-2.0/gtk/gtkctree.h:110: error: syntax error before 'GtkCList'[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:110: warning: no semicolon at end of struct or union[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:118: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:119: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:120: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:123: error: syntax error before '}' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:127: error: syntax error before 'GtkCListClass'[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:127: warning: no semicolon at end of struct or union[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:145: error: syntax error before '}' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:149: error: syntax error before 'GtkCListRow'[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:149: warning: no semicolon at end of struct or union[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:162: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:163: error: syntax error before ':' token[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:342: error: syntax error before 'gtk_ctree_node_get_cell_type'[[BR]] /opt/local/include/gtk-2.0/gtk/gtkctree.h:344: warning: data definition has no type or storage class[[BR]] make[3]: *** [gbclist.o] Error 1[[BR]] make[2]: *** [all-recursive] Error 1[[BR]] make[1]: *** [all-recursive] Error 1[[BR]] make: *** [all] Error 2[[BR]] }}} -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 15:28:25 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 22:28:25 -0000 Subject: [MacPorts] #16769: Incorrect checksum for Postgis 1.3.3 In-Reply-To: <054.7f49fb37cd870941ead9441ba6afb5fa@macports.org> References: <054.7f49fb37cd870941ead9441ba6afb5fa@macports.org> Message-ID: <063.42800bac94ff16dbe7c54e3a8ee3155f@macports.org> #16769: Incorrect checksum for Postgis 1.3.3 ---------------------------------+------------------------------------------ Reporter: terhorst at gmail.com | Owner: frank-lists at auroralux.net Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: Port: postgis | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * status: new => closed * resolution: => duplicate Comment: Duplicate of #16691. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 16:22:52 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 23:22:52 -0000 Subject: [MacPorts] #16777: Koha - Integrated Library Sistem Message-ID: <053.5914ed98dbca8c423113a254f336e0f1@macports.org> #16777: Koha - Integrated Library Sistem -------------------------------+-------------------------------------------- Reporter: danocd at tiscali.it | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Keywords: koha | Port: -------------------------------+-------------------------------------------- Is there anybody interested in having a port and a wiki HOWTO for installing this open source cataloguing software for libraries?[[BR]] [[BR]] Look at my wiki howto pages at [https://trac.macports.org/wiki/howto/Koha] -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 16:45:04 2008 From: noreply at macports.org (MacPorts) Date: Mon, 06 Oct 2008 23:45:04 -0000 Subject: [MacPorts] #16573: can't re-open my own ticket In-Reply-To: <059.0ac0ceb9152ef78f398704c5b367dba1@macports.org> References: <059.0ac0ceb9152ef78f398704c5b367dba1@macports.org> Message-ID: <068.e9a3670a24d013654144ecfdf52efadf@macports.org> #16573: can't re-open my own ticket --------------------------------------+------------------------------------- Reporter: macosforge.org at beej.org | Owner: wsiegrist at apple.com Type: defect | Status: closed Priority: Normal | Milestone: Website & Documentation Component: server/hosting | Version: Resolution: invalid | Keywords: Port: | --------------------------------------+------------------------------------- Comment(by macosforge.org at beej.org): ping -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 17:30:16 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 00:30:16 -0000 Subject: [MacPorts] #16764: Updated Chicken port to 3.4.0 In-Reply-To: <059.fbfa31f27f51af36869431b7fe2e6a15@macports.org> References: <059.fbfa31f27f51af36869431b7fe2e6a15@macports.org> Message-ID: <068.6453e95c661b54f78ba32c1cf3efe7c0@macports.org> #16764: Updated Chicken port to 3.4.0 --------------------------------------+------------------------------------- Reporter: ivan.g.raikov at gmail.com | Owner: arto.bendiken at gmail.com Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: chicken,scheme Port: chicken | --------------------------------------+------------------------------------- Comment(by ivan.g.raikov at gmail.com): Thanks, I have attached a patch for the Portfile. By the way, what program should I use to compute this rmd160 checksum? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 17:53:09 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 00:53:09 -0000 Subject: [MacPorts] #16764: Updated Chicken port to 3.4.0 In-Reply-To: <059.fbfa31f27f51af36869431b7fe2e6a15@macports.org> References: <059.fbfa31f27f51af36869431b7fe2e6a15@macports.org> Message-ID: <068.fbcd7c11af9b4d1e970645c783659579@macports.org> #16764: Updated Chicken port to 3.4.0 --------------------------------------+------------------------------------- Reporter: ivan.g.raikov at gmail.com | Owner: arto.bendiken at gmail.com Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: chicken,scheme Port: chicken | --------------------------------------+------------------------------------- Comment(by ram at macports.org): I use {{{ $ openssl dgst -rmd160 }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 18:27:21 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 01:27:21 -0000 Subject: [MacPorts] #16720: gnome-desktop 2.24.0 build failure In-Reply-To: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> References: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> Message-ID: <064.d3b95969fb9f1f6b6d2c5a17c3c7897b@macports.org> #16720: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gnome-desktop | ----------------------------------+----------------------------------------- Comment(by lists at sequestered.net): I'm experiencing the same thing on Leopard 10.5.5. I've replaced the portfile with the attached one, and get: Unable to execute port: extra characters after close-quote The error with the official Portfile: ---> Building gnome-desktop Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_gnome_gnome-desktop/work/gnome-desktop-2.24.0" && make all " returned error 2 Command output: gnome-rr.c:1111: error: dereferencing pointer to incomplete type gnome-rr.c: At top level: gnome-rr.c:1117: error: syntax error before 'RRMode' gnome-rr.c:1118: warning: 'mode_new' was used with no prototype before its definition gnome-rr.c: In function 'mode_new': gnome-rr.c:1119: error: invalid application of 'sizeof' to incomplete type 'GnomeRRMode' gnome-rr.c:1121: error: dereferencing pointer to incomplete type gnome-rr.c:1121: error: 'id' undeclared (first use in this function) gnome-rr.c:1122: error: dereferencing pointer to incomplete type gnome-rr.c:1122: error: 'info' undeclared (first use in this function) gnome-rr.c: In function 'gnome_rr_mode_get_id': gnome-rr.c:1131: error: dereferencing pointer to incomplete type gnome-rr.c: In function 'gnome_rr_mode_get_width': gnome-rr.c:1138: error: dereferencing pointer to incomplete type gnome-rr.c: In function 'gnome_rr_mode_get_freq': gnome-rr.c:1145: error: dereferencing pointer to incomplete type gnome-rr.c: In function 'gnome_rr_mode_get_height': gnome-rr.c:1152: error: dereferencing pointer to incomplete type gnome-rr.c: At top level: gnome-rr.c:1156: error: syntax error before 'XRRModeInfo' gnome-rr.c:1157: warning: 'mode_initialize' was used with no prototype before its definition gnome-rr.c: In function 'mode_initialize': gnome-rr.c:1158: error: 'mode' undeclared (first use in this function) gnome-rr.c:1159: error: 'info' undeclared (first use in this function) gnome-rr.c: In function 'mode_free': gnome-rr.c:1170: error: dereferencing pointer to incomplete type make[3]: *** [gnome-rr.lo] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 19:29:19 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 02:29:19 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.0363b7ba49451c9794ff48825a2fba55@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by blb at macports.org): Testing looks good so far, I have (among other ports in this test install): {{{ $ port-test installed py* The following ports are currently installed: py-mx-base @3.1.1_0+python25+python26 (active) py-setuptools @0.6c8_0+python25+python26 (active) py25-hashlib @2.5.2_0 (active) py25-zlib @2.5.2_0 (active) py26-hashlib @2.6_0 (active) py26-zlib @2.6_0 (active) python25 @2.5.2_5+darwin_9 (active) python26 @2.6_2+darwin_9 (active) }}} I used the foreach to define py25- and py26- dependencies for py- setuptools: {{{ $ port-test info +python25 +python26 py-setuptools @0.6c8 (python, devel) Variants: python24, +python25, +python26 ... Build Dependencies: py25-hashlib, py26-hashlib Library Dependencies: python25, python26, py25-zlib, py26-zlib }}} Now we should probably find some more esoteric modules for edge-case testing. Obviously in this test install I have defined the py26- ports, created a python26 portgroup, and replaced the python portgroup with the one here. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 19:31:26 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 02:31:26 -0000 Subject: [MacPorts] #16778: cairo @1.8.0 requesting a +no_quartz variant Message-ID: <065.f0464be56a0a049878f4cc442a6b03bc@macports.org> #16778: cairo @1.8.0 requesting a +no_quartz variant -------------------------------------------+-------------------------------- Reporter: mail_ben_schmidt at yahoo.com.au | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------------------+-------------------------------- Could a +no_quartz variant be added to the cairo port, please? The Quartz backend causes problems for me with Hebrew text. By the look of it, Quartz has some built-in bidirectional support that screws things up. I guess there is a slight chance this is related to [http://trac.macports.org/ticket/15626 #15626]. Even if it isn't related, the users experiencing the deficiency of that ticket may benefit from such a variant, too. A simple patch that adds the variant is attached. To make the problem go away, one must activate cairo with +no_quartz and then recompile pango (I do port -vf deactivate cairo, port -vf install cairo +no_quartz, port -vf uninstall pango @1.22.0_0, port -vf install pango). I guess this means pango must link against cairo statically. Is there any chance of changing that, too? I would open a second ticket, but I believe the maintainer is the same, so perhaps just a comment here will suffice. The problem is demonstrated in the attached pictures, which show a GTK2 GUI version of Vim displaying the attached text file with :set rightleft wrap linebreak. My suspicion that it is to do with bidi is substantiated by the fact that portions of the lines seem to be simply reversed in the consonant-only text (the part at the bottom without all the dots). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 19:31:56 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 02:31:56 -0000 Subject: [MacPorts] #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 In-Reply-To: <058.200a4c670199dbbcda0db661877e8598@macports.org> References: <058.200a4c670199dbbcda0db661877e8598@macports.org> Message-ID: <067.5be800aa32d584f6a55842f255375dd2@macports.org> #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 -------------------------------------+-------------------------------------- Reporter: aetherknight at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: dbus | -------------------------------------+-------------------------------------- Changes (by macsforever2000 at macports.org): * port: => dbus Comment: I updated dbus to 1.2.4 in r40564. It runs fine for me. Does this fix the problem for you? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 19:34:30 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 02:34:30 -0000 Subject: [MacPorts] #16778: cairo @1.8.0 requesting a +no_quartz variant In-Reply-To: <065.f0464be56a0a049878f4cc442a6b03bc@macports.org> References: <065.f0464be56a0a049878f4cc442a6b03bc@macports.org> Message-ID: <074.7a2036754ca65eab84b717a9ff9b8744@macports.org> #16778: cairo @1.8.0 requesting a +no_quartz variant --------------------------------------------+------------------------------- Reporter: mail_ben_schmidt at yahoo.com.au | Owner: ryandesign at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: cairo | --------------------------------------------+------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => ryandesign at macports.org * port: => cairo Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Mon Oct 6 21:13:10 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 04:13:10 -0000 Subject: [MacPorts] #16111: python25-2.5.2 builds differing dylib and framework libraries In-Reply-To: <052.edfe39d9be496496a111fa500a9e4102@macports.org> References: <052.edfe39d9be496496a111fa500a9e4102@macports.org> Message-ID: <061.73382d66cf5b2b906d6eb79f017378dd@macports.org> #16111: python25-2.5.2 builds differing dylib and framework libraries -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: python24 python30 framework Port: python25 | -------------------------------+-------------------------------------------- Comment(by myschizobuddy at gmail.com): can you please post the complete portfile (not diff) and files folder thankyou -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 01:22:17 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 08:22:17 -0000 Subject: [MacPorts] #16779: rage-6.3 fails to fetch, has a new homepage (patch attached) Message-ID: <064.02f8b8fd60eedfbae1d1973a7933f9c1@macports.org> #16779: rage-6.3 fails to fetch, has a new homepage (patch attached) ------------------------------------------+--------------------------------- Reporter: david.zuelke at bitextender.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: ragel homepage fetch | Port: ------------------------------------------+--------------------------------- http://research.cs.queensu.ca/~thurston/ragel/ says I'm graduating soon so the ragel homepage has to move. 5 ... 4 ... 3 ... http://www.complang.org/ragel/ Portfile patch attached -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 01:23:40 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 08:23:40 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.4bf24cd90c105f5bb76742f8cb059be8@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by gale at sefer.org): Also on 10.4.11, the upgrade to exiv2 0.17.1 fails to build. My error is far more verbose though. To avoid spamming the comments, I'll attach it as a file. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 01:24:22 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 08:24:22 -0000 Subject: [MacPorts] #16779: ragel-6.3 fails to fetch, has a new homepage (patch attached) (was: rage-6.3 fails to fetch, has a new homepage (patch attached)) In-Reply-To: <064.02f8b8fd60eedfbae1d1973a7933f9c1@macports.org> References: <064.02f8b8fd60eedfbae1d1973a7933f9c1@macports.org> Message-ID: <073.8303a20d19227839bdffdad71606f607@macports.org> #16779: ragel-6.3 fails to fetch, has a new homepage (patch attached) -------------------------------------------+-------------------------------- Reporter: david.zuelke at bitextender.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: homepage fetch Port: ragel | -------------------------------------------+-------------------------------- Changes (by blb at macports.org): * keywords: ragel homepage fetch => homepage fetch * owner: macports-tickets at lists.macosforge.org => mww at macports.org * port: => ragel -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 01:36:17 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 08:36:17 -0000 Subject: [MacPorts] #16772: gnome-desktop 2.24.0 build failure In-Reply-To: <055.3d7b3d9b9e942cba347c16095a507431@macports.org> References: <055.3d7b3d9b9e942cba347c16095a507431@macports.org> Message-ID: <064.f5233f9055062d1e2dc71d2f241bd56b@macports.org> #16772: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: d.fabisch at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by d.fabisch at gmail.com): Replying to [comment:1 blb@?]: > Are you running 10.4 or 10.5? If 10.4, may be related to/same thing as #16720. I 'm running 10.5.5. I checked #16720 also, but the errors differs. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 01:37:58 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 08:37:58 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.7fb4dc342d47931cde7ef7f60e61fe89@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by gale at sefer.org): Replying to [comment:6 gale@?]: > My error is far more verbose though. To avoid spamming > the comments, I'll attach it as a file. Sorry, trac seems to choke on this text file. I guess I'll just paste it: $ sudo port upgrade exiv2 Password: ---> Building exiv2 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exiv2/work/exiv2-0.17.1" && make all " returned error 2 Command output: if test "x1" = "x1"; then cd xmpsdk/src && make xmpsdk; fi; make[1]: Nothing to be done for `xmpsdk'. cd src && make all ../libtool --mode=link /usr/bin/g++-4.0 -L/opt/local/lib -L../xmpsdk/src -o libexiv2.la basicio.lo bmpimage.lo canonmn.lo convert.lo cr2image.lo crwimage.lo datasets.lo error.lo exif.lo futils.lo fujimn.lo gifimage.lo ifd.lo image.lo iptc.lo jp2image.lo jpgimage.lo makernote.lo makernote2.lo metadatum.lo minoltamn.lo mrwimage.lo nikonmn.lo olympusmn.lo orfimage.lo panasonicmn.lo pngimage.lo pngchunk.lo psdimage.lo rafimage.lo sigmamn.lo pentaxmn.lo sonymn.lo tags.lo tgaimage.lo tiffcomposite.lo tiffimage.lo tiffparser.lo tiffvisitor.lo types.lo value.lo version.lo properties.lo xmp.lo xmpsidecar.lo -rpath /opt/local/lib -version-info 4:1:0 -L/opt/local/lib -lintl -L/opt/local/lib -liconv -lc -R/opt/local/lib -Wl,-framework -Wl,CoreFoundation -L/opt/local/lib -liconv -R/opt/local/lib -lz -lexpat -lxmpsdk /usr/bin/g++-4.0 -dynamiclib -single_module -flat_namespace -undefined suppress -o .libs/libexiv2.4.0.1.dylib .libs/basicio.o .libs/bmpimage.o .libs/canonmn.o .libs/convert.o .libs/cr2image.o .libs/crwimage.o .libs/datasets.o .libs/error.o .libs/exif.o .libs/futils.o .libs/fujimn.o .libs/gifimage.o .libs/ifd.o .libs/image.o .libs/iptc.o .libs/jp2image.o .libs/jpgimage.o .libs/makernote.o .libs/makernote2.o .libs/metadatum.o .libs/minoltamn.o .libs/mrwimage.o .libs/nikonmn.o .libs/olympusmn.o .libs/orfimage.o .libs/panasonicmn.o .libs/pngimage.o .libs/pngchunk.o .libs/psdimage.o .libs/rafimage.o .libs/sigmamn.o .libs/pentaxmn.o .libs/sonymn.o .libs/tags.o .libs/tgaimage.o .libs/tiffcomposite.o .libs/tiffimage.o .libs/tiffparser.o .libs/tiffvisitor.o .libs/types.o .libs/value.o .libs/version.o .libs/properties.o .libs/xmp.o .libs/xmpsidecar.o -all_load /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exiv2/work/exiv2-0.17.1/xmpsdk/src/.libs/libxmpsdk.a -L/opt/local/lib -L/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exiv2/work/exiv2-0.17.1/xmpsdk/src /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lz /opt/local/lib/libexpat.dylib -Wl,-framework -Wl,CoreFoundation -install_name /opt/local/lib/libexiv2.4.dylib -compatibility_version 5 -current_version 5.1 ld: multiple definitions of symbol ___floatdisf /usr/lib/gcc/i686-apple-darwin8/4.0.1/libgcc.a(_floatdisf.o) private external definition of ___floatdisf in section (__TEXT,__text) /usr/lib/gcc/i686-apple- darwin8/4.0.1/../../../libgcc_s.10.4.dylib(_floatdisf_s.o) definition of ___floatdisf ld: multiple definitions of symbol ___floatdidf /usr/lib/gcc/i686-apple-darwin8/4.0.1/libgcc.a(_floatdidf.o) private external definition of ___floatdidf in section (__TEXT,__text) /usr/lib/gcc/i686-apple- darwin8/4.0.1/../../../libgcc_s.10.4.dylib(_floatdidf_s.o) definition of ___floatdidf ld: multiple definitions of symbol ___divdi3 /usr/lib/gcc/i686-apple-darwin8/4.0.1/libgcc.a(_divdi3.o) private external definition of ___divdi3 in section (__TEXT,__text) /usr/lib/gcc/i686-apple- darwin8/4.0.1/../../../libgcc_s.10.4.dylib(_divdi3_s.o) definition of ___divdi3 ld: multiple definitions of symbol ___udivdi3 /usr/lib/gcc/i686-apple-darwin8/4.0.1/libgcc.a(_udivdi3.o) private external definition of ___udivdi3 in section (__TEXT,__text) /usr/lib/gcc/i686-apple- darwin8/4.0.1/../../../libgcc_s.10.4.dylib(_udivdi3_s.o) definition of ___udivdi3 ld: multiple definitions of symbol ___umoddi3 /usr/lib/gcc/i686-apple-darwin8/4.0.1/libgcc.a(_umoddi3.o) private external definition of ___umoddi3 in section (__TEXT,__text) /usr/lib/gcc/i686-apple- darwin8/4.0.1/../../../libgcc_s.10.4.dylib(_umoddi3_s.o) definition of ___umoddi3 /usr/libexec/gcc/i686-apple-darwin8/4.0.1/libtool: internal link edit command failed make[1]: *** [lib] Error 1 make: *** [all] Error 2 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 01:42:52 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 08:42:52 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.d18616f6eb4e495985bfc5b0fac2ba05@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by gale at sefer.org): grr. I'm really sorry, trac globbed everything into one paragraph. I guess I needed to use some wiki formatting. Well, anyway, the point is that the link step complains about a lot of multiple symbol definitions. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 01:44:28 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 08:44:28 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.f96b07778c6f4dc91992b941342a9b34@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by tcurdt at vafer.org): Could you please try a manual build from the source distribution and report back? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 01:49:09 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 08:49:09 -0000 Subject: [MacPorts] #16780: gtk2hs 0.9.13 fails to build Message-ID: <050.b38ea4f8f71065ffb86416a10760366e@macports.org> #16780: gtk2hs 0.9.13 fails to build ----------------------------+----------------------------------------------- Reporter: gale at sefer.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: gtk2hs ----------------------------+----------------------------------------------- During port upgrade gtk2hs with an up-to-date ports tree, I get: {{{ svgcairo/Graphics/Rendering/Cairo/SVG.chs:201:2: Couldn't match expected type `()' against inferred type `CInt' Expected type: Render () Inferred type: Render CInt In the expression: liftIO $ (\ (SVG arg1) (Cairo arg2) -> withForeignPtr arg1 $ \ argPtr1 -> rsvg_handle_render_cairo argPtr1 arg2) svg cr In the expression: do cr <- ask liftIO $ (\ (SVG arg1) (Cairo arg2) -> withForeignPtr arg1 $ \ argPtr1 -> rsvg_handle_render_cairo argPtr1 arg2) svg cr }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 02:04:47 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 09:04:47 -0000 Subject: [MacPorts] #16776: xchat2-2.8.6 not compatible with gtk2-2.14 In-Reply-To: <052.c33fe8ad1178e77e5311b5bd513a958f@macports.org> References: <052.c33fe8ad1178e77e5311b5bd513a958f@macports.org> Message-ID: <061.e4dbb8612c35ead31f84a414f76c2bfd@macports.org> #16776: xchat2-2.8.6 not compatible with gtk2-2.14 -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: afb at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: xchat2 | -------------------------------+-------------------------------------------- Changes (by afb at macports.org): * status: new => closed * resolution: => fixed Comment: Fixed, r40570. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 02:17:07 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 09:17:07 -0000 Subject: [MacPorts] #16765: python26-2.6 numerous improvements In-Reply-To: <052.c31ae2e6632df35e9d37c36704173c45@macports.org> References: <052.c31ae2e6632df35e9d37c36704173c45@macports.org> Message-ID: <061.7a1ae776d412b34f9c2ff408e5779dc0@macports.org> #16765: python26-2.6 numerous improvements -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: python26 | -------------------------------+-------------------------------------------- Comment(by afb at macports.org): The python26 port was just a clone of python25, so aside from some things that changed (like some new Makefiles) everything that is wrong with it (2.5) is also inherited by this (2.6) and vice-versa. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 02:21:07 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 09:21:07 -0000 Subject: [MacPorts] #16780: gtk2hs 0.9.13 fails to build In-Reply-To: <050.b38ea4f8f71065ffb86416a10760366e@macports.org> References: <050.b38ea4f8f71065ffb86416a10760366e@macports.org> Message-ID: <059.eab895add9c4dd0097a3bdb07cd49b14@macports.org> #16780: gtk2hs 0.9.13 fails to build -----------------------------+---------------------------------------------- Reporter: gale at sefer.org | Owner: gwright at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gtk2hs | -----------------------------+---------------------------------------------- Changes (by jmr at macports.org): * owner: macports-tickets at lists.macosforge.org => gwright at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 02:55:13 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 09:55:13 -0000 Subject: [MacPorts] #16781: libxml2-2.7.1 does not exist anymore Message-ID: <054.c61397ad7cb2f1bac787f7c06f623b11@macports.org> #16781: libxml2-2.7.1 does not exist anymore --------------------------------+------------------------------------------- Reporter: macports at sinoid.be | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: --------------------------------+------------------------------------------- installing libxml2-2.7.1 will fail because the source code for it has been retracted. Version 2.7.2 is available though. Check http://xmlsoft.org/sources/ For now, source is still available at http://xmlsoft.org/sources/old/libxml2-2.7.1.tar.gz -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 06:24:33 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 13:24:33 -0000 Subject: [MacPorts] #16781: libxml2-2.7.1 does not exist anymore In-Reply-To: <054.c61397ad7cb2f1bac787f7c06f623b11@macports.org> References: <054.c61397ad7cb2f1bac787f7c06f623b11@macports.org> Message-ID: <063.5cf38dede51ff0824521f3aea482d3c0@macports.org> #16781: libxml2-2.7.1 does not exist anymore ---------------------------------+------------------------------------------ Reporter: macports at sinoid.be | Owner: cedric.luthi at gmail.com Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: libxml2 | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => cedric.luthi at gmail.com * port: => libxml2 Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 06:30:06 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 13:30:06 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.9de31dbaf34a3627356444085671c3a0@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by gale at sefer.org): Seems to compile OK, except for the following two issues: exiv2 did not recognize expat.h (I have the expat 2.0.1 port installed), even when I explicitly pointed to its location using --with-expat=/opt/local/include. So I had to use --disable-xmp, which causes exiv2 not to require expat. exiv2 did not find gettext, even though I have the gettext 0.17 port installed. So language support was disabled, and the build ended with {{{ cd po && make make[1]: Nothing to be done for `all'. }}} Other than that, it seemed to build OK. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 06:40:31 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 13:40:31 -0000 Subject: [MacPorts] #16773: glade 2.12.2 build failure In-Reply-To: <054.5c86b313d13b231fbb9e9cab4cbd027f@macports.org> References: <054.5c86b313d13b231fbb9e9cab4cbd027f@macports.org> Message-ID: <063.548d431272fc8f9d843d391926cb969b@macports.org> #16773: glade 2.12.2 build failure ---------------------------------+------------------------------------------ Reporter: kschombu at cisco.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: glade | ---------------------------------+------------------------------------------ Comment(by kschombu at cisco.com): Thanks. I was able to install glade3. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 08:30:47 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 15:30:47 -0000 Subject: [MacPorts] #16782: new port for pdfjam Message-ID: <053.ecdadc6fbe4b9e37905c5b7ac203bc70@macports.org> #16782: new port for pdfjam -------------------------------+-------------------------------------------- Reporter: jjstickel at vcn.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: new pdfjam | Port: -------------------------------+-------------------------------------------- New port for PDFjam, a small collection of shell scripts which provide a simple interface to some of the functionality of the excellent pdfpages package (by Andreas Matthias) for pdfLaTeX. http://go.warwick.ac.uk/pdfjam -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 09:48:12 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 16:48:12 -0000 Subject: [MacPorts] #16783: UPGRADE glade 2.12.2: fix build problem Message-ID: <054.3c26d28f7a7922ed594c92b0fa5b9217@macports.org> #16783: UPGRADE glade 2.12.2: fix build problem --------------------------------+------------------------------------------- Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Keywords: gtk2 | Port: glade --------------------------------+------------------------------------------- The attached patch fixes the build problem described in #16773. The issue is the same as described in #16715 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 09:57:03 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 16:57:03 -0000 Subject: [MacPorts] #16773: glade 2.12.2 build failure In-Reply-To: <054.5c86b313d13b231fbb9e9cab4cbd027f@macports.org> References: <054.5c86b313d13b231fbb9e9cab4cbd027f@macports.org> Message-ID: <063.45304180832e1523e9ca219340925117@macports.org> #16773: glade 2.12.2 build failure ---------------------------------+------------------------------------------ Reporter: kschombu at cisco.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: glade | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): See #16783 for a fix for this problem. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 10:54:06 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 17:54:06 -0000 Subject: [MacPorts] #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 In-Reply-To: <058.200a4c670199dbbcda0db661877e8598@macports.org> References: <058.200a4c670199dbbcda0db661877e8598@macports.org> Message-ID: <067.139463f87e503f8f326db8997a1a2827@macports.org> #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 -------------------------------------+-------------------------------------- Reporter: aetherknight at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: dbus | -------------------------------------+-------------------------------------- Comment(by db.evans at gmail.com): Replying to [comment:1 macsforever2000@?]: > I updated dbus to 1.2.4 in r40564. It runs fine for me. Does this fix the problem for you? > After updating to dbus 1.2.4 on 10.4.11 ppc, running dbus-launch yields {{{ DBUS_SESSION_BUS_ADDRESS=unix:path=/tmp/dbus- T5DlNFQjEQ,guid=2b780c3108f1012ab217b32d48eb9f4c DBUS_SESSION_BUS_PID=14394 }}} and ps ax gives {{{ 14394 ?? Ss 0:00.00 /opt/local/bin/dbus-daemon --fork --print-pid 4 --print-address 6 --session }}} but applications that use GConf continue to be unable to contact gconfd. In fact, it appears that gconfd is failing to launch in response to requests from applications. Normal behavior is to launch gconfd automatically for the first application that makes a request for a given user if no instance is already running and then quit after a timeout period if no additional requests are received. This doesn't appear to be happening. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 11:39:51 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 18:39:51 -0000 Subject: [MacPorts] #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 In-Reply-To: <058.200a4c670199dbbcda0db661877e8598@macports.org> References: <058.200a4c670199dbbcda0db661877e8598@macports.org> Message-ID: <067.28699d70c3f6b44ddc5188bec36b8731@macports.org> #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 -------------------------------------+-------------------------------------- Reporter: aetherknight at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: dbus | -------------------------------------+-------------------------------------- Comment(by pgijnxn02 at sneakemail.com): [http://trac.macports.org/ticket/16755 gconf 2.24 bug] -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 11:57:30 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 18:57:30 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.4b0fd66951a4479af25e37328b31cf62@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by db.evans at gmail.com): After upgrading to dbus-1.2.4, the memory allocation error that kept dbus- daemon from launching was fixed (see #16774) but the GConf problem remained. In response to the error message "X11 support not compiled in", rebuilt dbus 1.2.4 with configure option ''--with-x'' (default in current port is ''-- without-x''). GConf is now working for me. Apparently, not having X11 support enabled was keeping dbus from launching gconfd in the X11 environment. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 12:06:07 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 19:06:07 -0000 Subject: [MacPorts] #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 In-Reply-To: <058.200a4c670199dbbcda0db661877e8598@macports.org> References: <058.200a4c670199dbbcda0db661877e8598@macports.org> Message-ID: <067.b30ecfc2f2dd0f5994a8364a19b099a2@macports.org> #16774: dbus-1.2.3_0 has memory allocation failures on 10.4.11 -------------------------------------+-------------------------------------- Reporter: aetherknight at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: dbus | -------------------------------------+-------------------------------------- Changes (by macsforever2000 at macports.org): * status: new => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 12:06:50 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 19:06:50 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.ade4184af04f804ccd18890484960b29@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by macsforever2000 at macports.org): Are you suggesting a variant be added to dbus for X11, or just automatically include it? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 12:21:49 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 19:21:49 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.0301230c5fba505fc30b274600726910@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by db.evans at gmail.com): Replying to [comment:7 macsforever2000@?]: > Are you suggesting a variant be added to dbus for X11, or just automatically include it? My suggestion is to make --with-x the default and add a variant (no_x11) to turn it off if desired. In fact, I am testing a patched Portfile now and will post the patch as soon as it appears correct. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 12:23:08 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 19:23:08 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.c00d464db39f4d852061f09557805d0a@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by db.evans at gmail.com): Replying to [comment:7 macsforever2000@?]: > Are you suggesting a variant be added to dbus for X11, or just automatically include it? Attached is the proposed patch. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 12:32:48 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 19:32:48 -0000 Subject: [MacPorts] #15941: mjpegtools build error: ld: library not found for -lX11 In-Reply-To: <054.2249c33998eb468942be830401a4203d@macports.org> References: <054.2249c33998eb468942be830401a4203d@macports.org> Message-ID: <063.47dfc592a79653259eac91a217064ea6@macports.org> #15941: mjpegtools build error: ld: library not found for -lX11 ---------------------------------+------------------------------------------ Reporter: mroman at eduapple.pl | Owner: filippo.natali at gmail.com Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: invalid | Keywords: Port: mjpegtools | ---------------------------------+------------------------------------------ Comment(by detto-brumm at freenet.de): I had the exact same problem on my fresh 10.5.4 installation upgraded to 10.5.5 , installed xquartz-2.3.1 , installed Xcode3 (latest version) , and macports-1.6.0. The diff change in Portfile did work. Would be nice to see it fixed tho. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 12:33:54 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 19:33:54 -0000 Subject: [MacPorts] #16783: UPGRADE glade 2.12.2: fix build problem In-Reply-To: <054.3c26d28f7a7922ed594c92b0fa5b9217@macports.org> References: <054.3c26d28f7a7922ed594c92b0fa5b9217@macports.org> Message-ID: <063.e083bd9c386c2f4275d4f46582b2960c@macports.org> #16783: UPGRADE glade 2.12.2: fix build problem ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: gtk2 Port: glade | ---------------------------------+------------------------------------------ Comment(by kschombu at cisco.com): I attempted to patch the Portfile and got the following: {{{ sudo patch -i patch-glade-Portfile.diff patching file Portfile Hunk #3 FAILED at 51. 1 out of 3 hunks FAILED -- saving rejects to file Portfile.rej }}} Here is the contents of the generated Portfile.rej: {{{ *************** *** 42,47 **** variant gnomedb description {Enable GNOME DB support} { configure.args-delete --disable-gnome-db - depends_lib-append lib:libgnomedb:libgnomedb } --- 51,59 ---- variant gnomedb description {Enable GNOME DB support} { configure.args-delete --disable-gnome-db + depends_lib-append port:libgnomedb } + livecheck.check regex + livecheck.url http://ftp.gnome.org/pub/gnome/sources/${name}/${branch}/ + livecheck.regex {LATEST-IS-(\d+(?:\.\d+)*)} }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 12:52:30 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 19:52:30 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.28a6da466610185c1bab1a434683ceaa@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by db.evans at gmail.com): Updated patch. Hope this works better. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 13:01:02 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 20:01:02 -0000 Subject: [MacPorts] #16783: UPGRADE glade 2.12.2: fix build problem In-Reply-To: <054.3c26d28f7a7922ed594c92b0fa5b9217@macports.org> References: <054.3c26d28f7a7922ed594c92b0fa5b9217@macports.org> Message-ID: <063.b389c8b8f14b2baf9ac6b323b92344f8@macports.org> #16783: UPGRADE glade 2.12.2: fix build problem ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: gtk2 Port: glade | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:1 kschombu@?]: > I attempted to patch the Portfile and got the following: > > {{{ > sudo patch -i patch-glade-Portfile.diff > patching file Portfile > Hunk #3 FAILED at 51. > 1 out of 3 hunks FAILED -- saving rejects to file Portfile.rej > }}} > > Works for me using {{{ patch -p0 < patch-glade-Portfile.diff }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 13:39:29 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 20:39:29 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.c211c84beb42800f237dbc205c663fc2@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by macsforever2000 at macports.org): I applied the patch and reinstalled dbus, but i still see the problem in gnucash. What version of gconf do you have installed? I have 2.24.0_0. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 13:48:00 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 20:48:00 -0000 Subject: [MacPorts] #16784: HandBrake 0.7.1 fetch failure (URL changed) Message-ID: <052.aa7f60949974e013f0b45e2e84a083b0@macports.org> #16784: HandBrake 0.7.1 fetch failure (URL changed) ------------------------------+--------------------------------------------- Reporter: nocturne at mit.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Not set | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ------------------------------+--------------------------------------------- > # port install HandBrake > ---> Fetching HandBrake > ---> Attempting to fetch HandBrake-0.7.1.tar.gz from http://download.m0k.org/handbrake/ > Error: Target org.macports.fetch returned: fetch failed > Error: Status 1 encountered during processing. It appears HandBrake 0.9.1 was released, and that the URL for 0.7.1 has changed. This patch allows the source-fetch to succeed: 22c22 < master_sites http://download.m0k.org/handbrake/:h \ --- > master_sites http://download.m0k.org/handbrake/old/:h \ -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 14:15:48 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 21:15:48 -0000 Subject: [MacPorts] #13204: teTeX fails to build on Mac OS X 10.5 Leopard In-Reply-To: <056.33dc9c304192e7651ade6c3e48f06b60@macports.org> References: <056.33dc9c304192e7651ade6c3e48f06b60@macports.org> Message-ID: <065.19803b04b53a7a0aac48fd1d390924c7@macports.org> #13204: teTeX fails to build on Mac OS X 10.5 Leopard -----------------------------------+---------------------------------------- Reporter: coreymon77 at gmail.com | Owner: gwright at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.0 Resolution: | Keywords: tetex leopard -----------------------------------+---------------------------------------- Comment(by nocturne at mit.edu): This is the same as ticket# 14185 (https://trac.macports.org/ticket/14185) -- it's a build-system fragility being tickled by a user-correctable space in the directory "/usr/X11R6 1/". -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 14:24:24 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 21:24:24 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.487b57bfb786ea5a8f4efc1e90745b58@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by db.evans at gmail.com): Yes, I have gconf @2.24.0_0 installed. I haven't installed gnucash however. GConf applications that now work for me (and weren't before) are gconf-editor @2.24.0.1_0 gimp2 @2.6.0_0 glade3 @3.4.5_0. And I'm running on 10.4.11 ppc. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 14:36:53 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 21:36:53 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.e483acb76fd5dbed0a48ecf6e0ee1223@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Changes (by simon at macports.org): * status: new => closed * resolution: => fixed Comment: Hi Dave, you were right, this was the problem. I updated to the latest gtk2 and everything worked fine. Thanks for your help and for creating the port. I committed the port in r40585. Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 14:37:21 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 21:37:21 -0000 Subject: [MacPorts] #16785: pidgin-2.5.1 Will not build Message-ID: <057.33c5ce0b527976f0012340fc548df681@macports.org> #16785: pidgin-2.5.1 Will not build -----------------------------------+---------------------------------------- Reporter: kioarthurdane at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: pidgin | Port: pidgin -----------------------------------+---------------------------------------- First run results: {{{ ---> Verifying checksum(s) for dbus-glib ---> Extracting dbus-glib ---> Configuring dbus-glib ---> Building dbus-glib with target all ---> Staging dbus-glib into destroot ---> Installing dbus-glib 0.76_0 ---> Activating dbus-glib 0.76_0 ---> Cleaning dbus-glib ---> Fetching pidgin ---> Attempting to fetch pidgin-2.4.3.tar.bz2 from http://downloads.sourceforge.net/pidgin ---> Verifying checksum(s) for pidgin ---> Extracting pidgin ---> Applying patches to pidgin ---> Configuring pidgin ---> Building pidgin with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.4.3" && make all " returned error 2 Command output: pidgin/plugins/Makefile.am:68: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/Makefile.am:68: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/Makefile.am:68: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/Makefile.am:68: its definition is in aclocal's search path. pidgin/plugins/cap/Makefile.am:9: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/cap/Makefile.am:9: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/cap/Makefile.am:9: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/cap/Makefile.am:9: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/cap/Makefile.am:9: its definition is in aclocal's search path. pidgin/plugins/gestures/Makefile.am:7: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/gestures/Makefile.am:7: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/gestures/Makefile.am:7: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/gestures/Makefile.am:7: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/gestures/Makefile.am:7: its definition is in aclocal's search path. pidgin/plugins/gevolution/Makefile.am:7: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/gevolution/Makefile.am:7: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/gevolution/Makefile.am:7: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/gevolution/Makefile.am:7: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/gevolution/Makefile.am:7: its definition is in aclocal's search path. pidgin/plugins/musicmessaging/Makefile.am:14: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/musicmessaging/Makefile.am:14: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/musicmessaging/Makefile.am:14: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/musicmessaging/Makefile.am:14: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/musicmessaging/Makefile.am:14: its definition is in aclocal's search path. pidgin/plugins/ticker/Makefile.am:10: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/ticker/Makefile.am:10: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/ticker/Makefile.am:10: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/ticker/Makefile.am:10: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/ticker/Makefile.am:10: its definition is in aclocal's search path. make: *** [Makefile.in] Error 1 }}} Further attempts: {{{ sudo port install pidgin ---> Building pidgin with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.5.1" && make all " returned error 1 Command output: sh: line 0: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.5.1: No such file or directory }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 14:46:40 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 21:46:40 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.cd22c186f2ed7e54e73beb5ef0c8f920@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by simon at macports.org): PS: The livecheck doesn't work for this port. I couldn't open the gegl website at the moment so it's not working. If you want to I can fix it when the site is up again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 14:51:15 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 21:51:15 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.9a3b2b8f8bf6ec76b792590dde1f8d83@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:10 simon@?]: > Hi Dave, > > you were right, this was the problem. I updated to the latest gtk2 and everything worked fine. Thanks for your help and for creating the port. > > I committed the port in r40585. > > Simon Thanks for the commit, Simon. So the question is, are you going to take a crack at gimp2 2.6? This is a coffee pot (as opposed to just a cup of coffee) build. Dave -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 15:06:52 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 22:06:52 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.6108136ccde6d018430ae86ac8a2275f@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:11 simon@?]: > PS: The livecheck doesn't work for this port. I couldn't open the gegl website at the moment so it's not working. If you want to I can fix it when the site is up again. Yes, please. Actually, I wasn't sure how to do this one, so I left it at the defaults. This is using data from freshmeat which is not up to date. And I see that the homepage address is not correct either -- its the one for babl. But the gegl.org site seems to down right now as you say. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 15:25:14 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 22:25:14 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.c78c97987641f2144421bb193cd54533@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by macsforever2000 at macports.org): I've committed your patch in r40587. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 15:26:50 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 22:26:50 -0000 Subject: [MacPorts] #16785: pidgin-2.5.1 Will not build In-Reply-To: <057.33c5ce0b527976f0012340fc548df681@macports.org> References: <057.33c5ce0b527976f0012340fc548df681@macports.org> Message-ID: <066.8021e60e9566de648cf9d254eb18683e@macports.org> #16785: pidgin-2.5.1 Will not build ------------------------------------+--------------------------------------- Reporter: kioarthurdane at mac.com | Owner: simon at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: pidgin Port: pidgin | ------------------------------------+--------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => simon at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 15:49:18 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 22:49:18 -0000 Subject: [MacPorts] #16777: Koha - Integrated Library Sistem In-Reply-To: <053.5914ed98dbca8c423113a254f336e0f1@macports.org> References: <053.5914ed98dbca8c423113a254f336e0f1@macports.org> Message-ID: <062.3d4d141aa62b7e2e9d1c200becd2e0fb@macports.org> #16777: Koha - Integrated Library Sistem --------------------------------+------------------------------------------- Reporter: danocd at tiscali.it | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: | Keywords: koha Port: koha | --------------------------------+------------------------------------------- Changes (by ryandesign at macports.org): * cc: ryandesign at macports.org (removed) * port: => koha Comment: I have no objection to anyone creating a koha port. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 15:54:33 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 22:54:33 -0000 Subject: [MacPorts] #16778: cairo @1.8.0 requesting a +no_quartz variant In-Reply-To: <065.f0464be56a0a049878f4cc442a6b03bc@macports.org> References: <065.f0464be56a0a049878f4cc442a6b03bc@macports.org> Message-ID: <074.b417ac1f30d2717bada6435cf76fa781@macports.org> #16778: cairo @1.8.0 requesting a +no_quartz variant --------------------------------------------+------------------------------- Reporter: mail_ben_schmidt at yahoo.com.au | Owner: ryandesign at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: cairo | --------------------------------------------+------------------------------- Comment(by ryandesign at macports.org): Replying to [ticket:16778 mail_ben_schmidt@?]: I guess this means pango must link against cairo statically. Is there any chance of changing that, too? I would open a second ticket, but I believe the maintainer is the same, so perhaps just a comment here will suffice. Please file a separate issue against pango for that, or better yet, file a bug report with the developers of Pango. I don't think I would know what to do to fix it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 16:20:17 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 23:20:17 -0000 Subject: [MacPorts] #16341: freetype variant request In-Reply-To: <056.ba5448f45a5008bd558dda0637cee840@macports.org> References: <056.ba5448f45a5008bd558dda0637cee840@macports.org> Message-ID: <065.582f5469a939a6044b158861f6329c0d@macports.org> #16341: freetype variant request -----------------------------------+---------------------------------------- Reporter: cabanela at mnstate.edu | Owner: ryandesign at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: freetype | -----------------------------------+---------------------------------------- Changes (by ryandesign at macports.org): * port: => freetype Old description: > As noted at > > == http://lists.gnu.org/archive/html/freetype/2007-11/msg00000.html == > > There is a problem in Leopard (possibly on intel Macs) where calling > CoreFoundation with a fork() causes a crash. Unforuntately, if freetype > attempts to access native font suitcases, it will access a carbon library > that triggers the crash. > > Would it be possible to request a freetype variant that would allow > disabling of the carbon library access. This can be done by adding > > --with-quickdraw-toolbox=no --with-quickdraw-carbon=no > > to the configure line. I don't know what other ports this might affect, > but none of them can be working on Leopard at this moment. New description: As noted at == http://lists.gnu.org/archive/html/freetype/2007-11/msg00000.html == There is a problem in Leopard (possibly on intel Macs) where calling CoreFoundation with a fork() causes a crash. Unforuntately, if freetype attempts to access native font suitcases, it will access a carbon library that triggers the crash. Would it be possible to request a freetype variant that would allow disabling of the carbon library access. This can be done by adding {{{ --with-quickdraw-toolbox=no --with-quickdraw-carbon=no }}} to the configure line. I don't know what other ports this might affect, but none of them can be working on Leopard at this moment. -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 16:20:49 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 23:20:49 -0000 Subject: [MacPorts] #16778: cairo @1.8.0 requesting a +no_quartz variant In-Reply-To: <065.f0464be56a0a049878f4cc442a6b03bc@macports.org> References: <065.f0464be56a0a049878f4cc442a6b03bc@macports.org> Message-ID: <074.16c3a51e41c5935d06a0d6c3383d41f3@macports.org> #16778: cairo @1.8.0 requesting a +no_quartz variant --------------------------------------------+------------------------------- Reporter: mail_ben_schmidt at yahoo.com.au | Owner: ryandesign at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: cairo | --------------------------------------------+------------------------------- Comment(by mail_ben_schmidt at yahoo.com.au): Replying to [comment:3 ryandesign@?]: > Replying to [ticket:16778 mail_ben_schmidt@?]: > Please file a separate issue against pango for that, or better yet, file a bug report with the developers of Pango. I don't think I would know what to do to fix it. OK, I'll try to do that when I have a moment: check it isn't just a configure flag and then nag the Pango guys about it. Same with the actual text rendering bug: I'll try to report that to the cairo folks. This ticket can just be about adding a no_quartz variant as a workaround/option. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 16:21:08 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 23:21:08 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.337eb9afae9b27cab3ff1d145e60acfc@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by simon at macports.org): Replying to [comment:12 db.evans@?]: > Thanks for the commit, Simon. So the question is, are you going to take a crack at gimp2 2.6? This is a coffee pot (as opposed > to just a cup of coffee) build. > > Dave I just committed gimp2, see #16735 for more information. Yes, it took quite a while to build ;-) I fixed the livecheck in r40589, it looks like there is a new version of gegl out. Maybe you could update the Portfile. Thanks, Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 16:22:29 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 23:22:29 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.26edf52287cdbc8dde090887613ea481@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Changes (by simon at macports.org): * cc: simon at macports.org (added) * status: new => closed * resolution: => fixed Comment: Committed in r40588. Thanks again for your help. webkit-gtk didn't build for me so I tried building gimp2 without it, and it worked for me. I'm not sure if this reduces gimp's functionality. So if anybody else has problems building webkit-gtk a workaround would be to build gimp2 with out it. Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 16:23:52 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 23:23:52 -0000 Subject: [MacPorts] #15909: freetype 2.3.7 / php5 5.2.6 - PHP imagettftext broken In-Reply-To: <051.b0d252d6daf3e066f5f1afbd0e4507b7@macports.org> References: <051.b0d252d6daf3e066f5f1afbd0e4507b7@macports.org> Message-ID: <060.3f3c6b9bfb1a8bd778f7e81a76bc0885@macports.org> #15909: freetype 2.3.7 / php5 5.2.6 - PHP imagettftext broken ------------------------------+--------------------------------------------- Reporter: philip at jocks.to | Owner: ryandesign at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: php5 freetype imagettftext gd2 Port: freetype | ------------------------------+--------------------------------------------- Changes (by ryandesign at macports.org): * cc: simon at simonwheatley.co.uk (added) * port: => freetype Comment: Someone just please tell me what to change and why. This ticket says to remove --with-old-mac-fonts and add --with-fsspec=no --with-fsref=no --with-quickdraw-toolbox=no --with-quickdraw-carbon=no. #16341 says I only need to add --with-quickdraw-toolbox=no --with-quickdraw-carbon=no. If someone could tell me definitively what configure options to add or remove, and what the implications of each change are, then I can commit something. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 16:28:12 2008 From: noreply at macports.org (MacPorts) Date: Tue, 07 Oct 2008 23:28:12 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.01c18d2ecbea19ff891ef89a73e342f9@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by blb at macports.org): What's the purpose of {{{proc python.versions}}} and {{{proc python.default_version}}}? Since there are globals with the same name, which are initialized, and all use of these names is by the variable, aren't they unnecessary? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 17:22:33 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 00:22:33 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.36a3c7fa2ab5bccddab22cd9b781ed29@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:14 simon@?]: > Replying to [comment:12 db.evans@?]: > > Thanks for the commit, Simon. So the question is, are you going to take a crack at gimp2 2.6? This is a coffee pot (as opposed > > to just a cup of coffee) build. > > > > Dave > > I just committed gimp2, see #16735 for more information. Yes, it took quite a while to build ;-) > > I fixed the livecheck in r40589, it looks like there is a new version of gegl out. Maybe you could update the Portfile. > > Thanks, > > Simon Yes, I saw the new version as well. Hope to have a new update soon but it requires yet another new port (libopenraw) as a dependency and that one has a build problem right now. Thanks for all your help. Dave -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 18:14:08 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 01:14:08 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.e31ccb528f060fcf81cb97e1e1d01c32@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by jmr at macports.org): Replying to [comment:11 blb@?]: > What's the purpose of {{{proc python.versions}}} and {{{proc python.default_version}}}? Since there are globals with the same name, which are initialized, and all use of these names is by the variable, aren't they unnecessary? The variable and proc with the same name is just like all the regular portfile 'keywords'. They're there so that the port can specify a different set of supported python versions, and a different default version. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 18:34:08 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 01:34:08 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.46b65ba24607aae81a99c1ae4653eaad@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): webkit is needed for the help browser plugin. so yes you can live without it. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 18:38:26 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 01:38:26 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.2e30110a0e57c715b452c431fe62c77f@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): what about the gimp meta port -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 18:45:58 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 01:45:58 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.450d396b31cbcad21becf5fae5360c5c@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by blb at macports.org): Replying to [comment:12 jmr@?]: > The variable and proc with the same name is just like all the regular portfile 'keywords'. They're there so that the port can specify a different set of supported python versions, and a different default version. So it's like portmain.tcl's {{{options ...}}} only more directly then? I can definitely understand the occasional need to change which python versions are supported by a module, but I would think the default version should be coming from elsewhere and not settable by a port? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 18:52:53 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 01:52:53 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.df30073d308d1ab75d2b6130ad3236d2@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): the new version 0.0.20 also has ruby as a dependency "Checks for Ruby used to make API docs" -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 18:54:22 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 01:54:22 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.3586d84157413045e1f95c70bff35eb4@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): you also need the gdk-pixbuf dependency -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 18:57:45 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 01:57:45 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.25c6ec1bd166e632c9c1121d90d3bccf@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by hypocrite at lawyer.com): I've also tried installing the new dbus @1.2.4_1, but I still get the same problems with gconf @2.24.0_0 and gnucash. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 19:30:24 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 02:30:24 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.759c3416d795ab8810d3673fdd191ab9@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by pgijnxn02 at sneakemail.com): Gnucash now works for me with dbus 1.2.4_1. I also unloaded+loaded the launchd item, and re-upgraded gconf to 2.24.0_0. Like db.evans, I am running 10.4.11 PPC. Is that true for anyone it's still broken for? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 20:27:39 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 03:27:39 -0000 Subject: [MacPorts] #14615: select.sh tools (python_select, gcc_select) should remember selected versions across upgrade In-Reply-To: <067.62796b6c908dd3aa7a60dbf55d3ddf62@macports.org> References: <067.62796b6c908dd3aa7a60dbf55d3ddf62@macports.org> Message-ID: <076.449fa21d993d9f94484562af35326d78@macports.org> #14615: select.sh tools (python_select, gcc_select) should remember selected versions across upgrade ----------------------------------------------+----------------------------- Reporter: macports_dharland at trashmail.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ----------------------------------------------+----------------------------- Changes (by blb at macports.org): * cc: blb at macports.org (added) Comment: Attaching a patch which should accomplish this (remember which is selected, offer a switch to show what it is). Once done, the *_select ports will need to be updated to check for the existence of .current and if found, not run the select in the post-destroot phase. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 20:35:39 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 03:35:39 -0000 Subject: [MacPorts] #16786: update: fftw-3 to 3.1.3 Message-ID: <052.650ca8469d24fb4e11df6cdbddccc494@macports.org> #16786: update: fftw-3 to 3.1.3 ------------------------------+--------------------------------------------- Reporter: ram at macports.org | Owner: takeshi at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: fftw-3 ------------------------------+--------------------------------------------- The attached patch update the fftw-3 port to 3.1.3 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 21:04:51 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 04:04:51 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.1fa47192a9fb483a212a4959834c9e86@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by blb at macports.org): If #14615 gets committed, then python.default_version should come from its .current; then python_select would be the way of selecting the default version for the command line and for installing python modules. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 21:34:37 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 04:34:37 -0000 Subject: [MacPorts] #16723: unify the python portgroups In-Reply-To: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> References: <052.94fab989ab68cb25f3bc6f6c380fdd16@macports.org> Message-ID: <061.d62bf3f65defe296c12b42884ee8c91d@macports.org> #16723: unify the python portgroups -------------------------------+-------------------------------------------- Reporter: jmr at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by jmr at macports.org): Replying to [comment:14 blb@?]: > If #14615 gets committed, then python.default_version should come from its .current; then python_select would be the way of selecting the default version for the command line and for installing python modules. Then, the only problem then is what to do if the default version isn't in the list of supported versions. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 22:47:30 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 05:47:30 -0000 Subject: [MacPorts] #16720: gnome-desktop 2.24.0 build failure In-Reply-To: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> References: <055.9067e9227f298bd44f0fcf3e346d0609@macports.org> Message-ID: <064.2e1f2fe7d4388b6fd308c6d035d99cae@macports.org> #16720: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: vinc17 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gnome-desktop | ----------------------------------+----------------------------------------- Comment(by mp at dpj.sent.com): Installing [http://xquartz.macosforge.org/trac/wiki/X112.3.1 version 2.3.1 of XQuartz] on my MBP running OSX 10.5.5 has fixed the problem for me, but I guess this isn't really helpful for Tiger users... -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 23:29:01 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 06:29:01 -0000 Subject: [MacPorts] #14249: Add libXt - X Toolkit Intrinsics In-Reply-To: <053.a9cee08baead425084335291783e66a1@macports.org> References: <053.a9cee08baead425084335291783e66a1@macports.org> Message-ID: <062.2eb8527e453f2cf53c3050483a3c8c4c@macports.org> #14249: Add libXt - X Toolkit Intrinsics --------------------------------+------------------------------------------- Reporter: mvfranz at gmail.com | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment(by myschizobuddy at gmail.com): this is needed to build the latest webkit build. any updates on this port -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 23:37:13 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 06:37:13 -0000 Subject: [MacPorts] #13997: Error when compiling gcj34 In-Reply-To: <051.3a61f4e58a7513095b301e456782c093@macports.org> References: <051.3a61f4e58a7513095b301e456782c093@macports.org> Message-ID: <060.3496beb7a9664d95d0791e3622b040cb@macports.org> #13997: Error when compiling gcj34 ------------------------------+--------------------------------------------- Reporter: peyroux at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: wontfix | Keywords: Port: gcj34 | ------------------------------+--------------------------------------------- Changes (by ryandesign at macports.org): * status: new => closed * resolution: => wontfix * port: => gcj34 Comment: Closing, since there was no further feedback from the reporter. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Tue Oct 7 23:39:12 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 06:39:12 -0000 Subject: [MacPorts] #16549: gcc43: patch to add Ada support In-Reply-To: <059.eb665fae26bc4b84ccc08df7e8744497@macports.org> References: <059.eb665fae26bc4b84ccc08df7e8744497@macports.org> Message-ID: <068.c594eade5e3511dd1e9ed00ff99280b0@macports.org> #16549: gcc43: patch to add Ada support --------------------------------------+------------------------------------- Reporter: martin.osx at krischik.com | Owner: mww at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gcc43 | --------------------------------------+------------------------------------- Comment(by martin.osx at krischik.com): Replying to [comment:5 ryandesign@?]: > I don't like the +ada variant because it causes the entire port to be built using MacPorts' gcc 4.3 instead of with Apple's gcc 4.0. > And it causes the entire port to be built using the external gcc 4.3 in /usr/local/ada-4.3. Forgot to mention: The compiler is never build with Apple's gcc 4.0. Apple's gcc 4.0 is only used in stage 1 after which the the build system starts to use the compiler freshly created in stage 1 to recreate itself yet again. Pretty standart behavior for a self hosted system. Martin -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 00:49:21 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 07:49:21 -0000 Subject: [MacPorts] #16728: Error Installing exiv2 In-Reply-To: <054.f5240959e50b35a3338641c30722057e@macports.org> References: <054.f5240959e50b35a3338641c30722057e@macports.org> Message-ID: <063.7f0be568d56086809f0732a3b1f005d8@macports.org> #16728: Error Installing exiv2 ---------------------------------+------------------------------------------ Reporter: jsnodgra at umich.edu | Owner: tcurdt at vafer.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: exiv2 | ---------------------------------+------------------------------------------ Comment(by tcurdt at vafer.org): {{{ -- Exiv2 0.17.1 feature configuration summary -- -- Build a shared library......... YES -- PNG image support.............. YES -- Native language support........ NO gettext is required for native language support. Make sure the gettext header files are installed. You can get gettext from http://www.gnu.org/software/gettext/ -- Conversion of Windows XP tags.. YES -- Nikon lens database............ YES -- XMP metadata support........... YES }}} Is what I get on configure. And then a make runs through just fine for me on 10.5. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 01:29:59 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 08:29:59 -0000 Subject: [MacPorts] #14249: Add libXt - X Toolkit Intrinsics In-Reply-To: <053.a9cee08baead425084335291783e66a1@macports.org> References: <053.a9cee08baead425084335291783e66a1@macports.org> Message-ID: <062.7ff41134c5dfafe5358ee9bc9fe27936@macports.org> #14249: Add libXt - X Toolkit Intrinsics --------------------------------+------------------------------------------- Reporter: mvfranz at gmail.com | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment(by myschizobuddy at gmail.com): its categories have to be "X11 devel" -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 01:32:06 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 08:32:06 -0000 Subject: [MacPorts] #16787: xercesc 2.8.0 fails to fetch sources. source location changed Message-ID: <053.d70966eeb907f77d4bb7d0f4cab8946e@macports.org> #16787: xercesc 2.8.0 fails to fetch sources. source location changed -------------------------------+-------------------------------------------- Reporter: jwlee33 at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: xercesc | Port: -------------------------------+-------------------------------------------- Source location seems to have changed. In current port file, it needs change from master_sites apache:xerces/c/sources/ to master_sites apache:xerces/c/2/sources/ I don't know well about the format of port file. I guess that is needed change because macport tries to fetch source from http://www.apache.org/dist/xerces/c/sources/, but right and working path is http://www.apache.org/dist/xerces/c/2/sources/. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 02:16:07 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 09:16:07 -0000 Subject: [MacPorts] #16788: BUG: Error: Unable to open port: invalid command name "use_lzma" Message-ID: <055.5b0e2625473567146ee5098c094823b0@macports.org> #16788: BUG: Error: Unable to open port: invalid command name "use_lzma" ---------------------------------+------------------------------------------ Reporter: milosh at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: base | Version: 1.7.0 Keywords: | Port: ---------------------------------+------------------------------------------ I am trying to update texlive port but the new distfiles happen to be compressed using lzma. By chance, use_lzma exists in macports (at least in man portfile), but using it results in error telling that use_lzma is not a valid macports command {{{ % port -d lint texlive_base DEBUG: Found port in file:///home/manu/tmp/macports/dports//tex/texlive_base DEBUG: Changing to port directory: /home/manu/tmp/macports/dports/tex/texlive_base DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: invalid command name "use_lzma" while executing "use_lzma yes" (file "Portfile" line 24) invoked from within "source Portfile" invoked from within "$workername eval source Portfile" (procedure "mportopen" line 46) invoked from within "mportopen $porturl [array get options] [array get variations]" Error: Unable to open port: invalid command name "use_lzma" }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 02:31:25 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 09:31:25 -0000 Subject: [MacPorts] #16789: Webkit with video variant Message-ID: <059.b50b924270ec7b9611c3fe12c96fc4a9@macports.org> #16789: Webkit with video variant -------------------------------------+-------------------------------------- Reporter: myschizobuddy at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: webkit | Port: webkit-gtk -------------------------------------+-------------------------------------- Video support in webkit-gtk is optional, Hence i have made it a variant along with other variants (experimental svg, no svg) this should decrease the number of dependencies to install webkit-gtk. I haven't updated the webkit to latest nightly bild as it requires libXt, which currently doesn't compile(#14249) Also taking over as maintainer -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 04:36:35 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 11:36:35 -0000 Subject: [MacPorts] #14615: select.sh tools (python_select, gcc_select) should remember selected versions across upgrade In-Reply-To: <067.62796b6c908dd3aa7a60dbf55d3ddf62@macports.org> References: <067.62796b6c908dd3aa7a60dbf55d3ddf62@macports.org> Message-ID: <076.ce6880556c888bbcfc4665a3c55eb50c@macports.org> #14615: select.sh tools (python_select, gcc_select) should remember selected versions across upgrade ----------------------------------------------+----------------------------- Reporter: macports_dharland at trashmail.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ----------------------------------------------+----------------------------- Comment(by raimue at macports.org): Committed the patch in r40609. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 04:57:16 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 11:57:16 -0000 Subject: [MacPorts] #14249: Add libXt - X Toolkit Intrinsics In-Reply-To: <053.a9cee08baead425084335291783e66a1@macports.org> References: <053.a9cee08baead425084335291783e66a1@macports.org> Message-ID: <062.e35b5efd82385ff40c5aa2c87b36e74b@macports.org> #14249: Add libXt - X Toolkit Intrinsics --------------------------------+------------------------------------------- Reporter: mvfranz at gmail.com | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment(by myschizobuddy at gmail.com): ok port:xorg-libX11 is required for this to build on leopard. beside that this is good to go -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 04:58:54 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 11:58:54 -0000 Subject: [MacPorts] #14249: Add libXt - X Toolkit Intrinsics In-Reply-To: <053.a9cee08baead425084335291783e66a1@macports.org> References: <053.a9cee08baead425084335291783e66a1@macports.org> Message-ID: <062.58f2a3d225f11c990482c66d11ae285b@macports.org> #14249: Add libXt - X Toolkit Intrinsics --------------------------------+------------------------------------------- Reporter: mvfranz at gmail.com | Owner: ram at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Comment(by myschizobuddy at gmail.com): I guess we can have a variant if users want to build against the system or not -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 06:27:58 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 13:27:58 -0000 Subject: [MacPorts] #16786: update: fftw-3 to 3.1.3 In-Reply-To: <052.650ca8469d24fb4e11df6cdbddccc494@macports.org> References: <052.650ca8469d24fb4e11df6cdbddccc494@macports.org> Message-ID: <061.95d0be9f68648f2438e8fd194b43a245@macports.org> #16786: update: fftw-3 to 3.1.3 -------------------------------+-------------------------------------------- Reporter: ram at macports.org | Owner: takeshi at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: fftw-3 | -------------------------------+-------------------------------------------- Changes (by takeshi at macports.org): * status: new => closed * resolution: => fixed Comment: Thanks!! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 07:11:42 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 14:11:42 -0000 Subject: [MacPorts] #16790: Add python virtualenv portfile Message-ID: <059.478028a588d329d68a720004e2f9d7e4@macports.org> #16790: Add python virtualenv portfile -------------------------------------+-------------------------------------- Reporter: arthur at arthurkoziel.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: virtualenv python | Port: -------------------------------------+-------------------------------------- Portfile for virtualenv 1.3. Would be great if it could be added to macports. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 07:23:12 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 14:23:12 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.d4a8ca833df1dfb894190ddd76163424@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by simon at macports.org): Oh, I forgot about it, updated in r40617. Thanks for the hint. @db.evans at gmail.com: I also added you as maintainer to the gimp meta port, I hope this is okay for you. Simon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 07:38:34 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 14:38:34 -0000 Subject: [MacPorts] #16791: UPDATE: redland-1.0.8 Message-ID: <057.687c0853ee934230b199884884d794d9@macports.org> #16791: UPDATE: redland-1.0.8 -----------------------------------+---------------------------------------- Reporter: lyle at lylejohnson.name | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: redland -----------------------------------+---------------------------------------- The attached patch adds support for all of the db4[1-6] variants. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 08:09:24 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 15:09:24 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.83121cef9b4dd3d443e6ea4f21cc653c@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): @simon i have filled an enhancement of webkit (#16789) try that one -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 08:15:25 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 15:15:25 -0000 Subject: [MacPorts] #16735: UPGRADE: gimp2 to 2.6.0 In-Reply-To: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> References: <054.b10dab195e212ee214bfb61a42e16bd1@macports.org> Message-ID: <063.809f3938082b680a6bb46eb7a8e37025@macports.org> #16735: UPGRADE: gimp2 to 2.6.0 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: image processing graphics Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): this will be a good time to sneak gimp-app under him as well :) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 09:10:55 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 16:10:55 -0000 Subject: [MacPorts] #10881: BUG: pkg/mpkg/dmg/mdmg/rpm/dpkg commands skip destroot In-Reply-To: <053.b4bd0a377deafa497f411c20c4de75fd@macports.org> References: <053.b4bd0a377deafa497f411c20c4de75fd@macports.org> Message-ID: <062.72791c3fd9db19abc0ae5a62784f46f5@macports.org> #10881: BUG: pkg/mpkg/dmg/mdmg/rpm/dpkg commands skip destroot --------------------------------+------------------------------------------- Reporter: dcurtis at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: Resolution: | Keywords: mpkg destroot --------------------------------+------------------------------------------- Comment(by probono at puredarwin.org): Given that this has been around for 2 years, is this considered a bug or a feature? (honest question) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 09:50:04 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 16:50:04 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.ebfb8379e92ffa36abef35904f57bcae@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by aoeumacports at brinckerhoff.org): On ppc 10.5.5, the new version of dbus resolves the "compiled without X11 support" problem, but _not_ the underlying long-startup-time can't -connect-to-dbus problem[*]. To fix this, I had to roll back gconf to 2.22.0_0 as others did. This resolved the problem. Also, Re-upgrading to gconf 2.24.0_0 caused the problem to come back. [*] Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-aOhufhZy8k: No such file or directory) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 10:07:02 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 17:07:02 -0000 Subject: [MacPorts] #16789: Webkit with video variant In-Reply-To: <059.b50b924270ec7b9611c3fe12c96fc4a9@macports.org> References: <059.b50b924270ec7b9611c3fe12c96fc4a9@macports.org> Message-ID: <068.c55644f75b899bf1e70876f122189a85@macports.org> #16789: Webkit with video variant --------------------------------------+------------------------------------- Reporter: myschizobuddy at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: webkit Port: webkit-gtk | --------------------------------------+------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 10:07:32 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 17:07:32 -0000 Subject: [MacPorts] #16789: Webkit with video variant In-Reply-To: <059.b50b924270ec7b9611c3fe12c96fc4a9@macports.org> References: <059.b50b924270ec7b9611c3fe12c96fc4a9@macports.org> Message-ID: <068.a6f197802da07d048191f579d5397bad@macports.org> #16789: Webkit with video variant --------------------------------------+------------------------------------- Reporter: myschizobuddy at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: webkit Port: webkit-gtk | --------------------------------------+------------------------------------- Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40621. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 10:13:36 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 17:13:36 -0000 Subject: [MacPorts] #16792: Request for new port: rkhunter Message-ID: <053.83e9c7e6c6d4fdd315118c813f553326@macports.org> #16792: Request for new port: rkhunter -------------------------------+-------------------------------------------- Reporter: ralph at cs.cf.ac.uk | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------+-------------------------------------------- This is a request for a port of rkhunter (root kit detection software). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 10:16:32 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 17:16:32 -0000 Subject: [MacPorts] #16793: Request for port: yorick Message-ID: <053.300b33b0e7d026e7ca73ddc32d3a2cfc@macports.org> #16793: Request for port: yorick -------------------------------+-------------------------------------------- Reporter: ralph at cs.cf.ac.uk | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------+-------------------------------------------- This is a request for a new port: yorick See http://yorick.sourceforge.net/ -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 10:38:23 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 17:38:23 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.99c869a1e2ebbb0b6361df833f8bc6c0@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:16 myschizobuddy@?]: > the new version 0.0.20 also has ruby as a dependency > "Checks for Ruby used to make API docs" Mac OS X provides ruby as /usr/bin/ruby (1.8.2 on 10.4.11 ppc) which appears to be sufficient. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 10:47:46 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 17:47:46 -0000 Subject: [MacPorts] #16730: graphics/gegl-0.0.18: new port In-Reply-To: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> References: <054.ff4403fbfefdaca35d31f1e0c830833f@macports.org> Message-ID: <063.d92c758c22e1b4e9aafff1552db41cf6@macports.org> #16730: graphics/gegl-0.0.18: new port ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gegl image processing Port: gegl | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Replying to [comment:17 myschizobuddy@?]: > you also need the gdk-pixbuf dependency port gdk-pixbuf is an obsolete version built on glib1 and gtk1. Current versions of this functionality are provided as part of port gtk2. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 11:03:49 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 18:03:49 -0000 Subject: [MacPorts] #16083: gnumeric row/column labels show broken character box instead of the letter/number In-Reply-To: <052.e5f3b4b606546cde69958dd210b14c05@macports.org> References: <052.e5f3b4b606546cde69958dd210b14c05@macports.org> Message-ID: <061.81ea01e8f3672d37d7103641ff2f54de@macports.org> #16083: gnumeric row/column labels show broken character box instead of the letter/number -------------------------------+-------------------------------------------- Reporter: bzbarsky at mit.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: -------------------------------+-------------------------------------------- Comment(by aoeumacports at brinckerhoff.org): I'm also experiencing this problem, and it appears to be related to an inability to specify the Header font in the preferences pane. In particular, going to "preferences" and attempting to choose a "Header" font signals this error: ** (gnumeric:31326): CRITICAL **: go_format_ref: assertion `gf != NULL' failed ... which suggests that 'gf' contains a reference to the header font, and that it's not currently set. John Clements -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 11:54:24 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 18:54:24 -0000 Subject: [MacPorts] #16083: gnumeric row/column labels show broken character box instead of the letter/number In-Reply-To: <052.e5f3b4b606546cde69958dd210b14c05@macports.org> References: <052.e5f3b4b606546cde69958dd210b14c05@macports.org> Message-ID: <061.5bb3dfe0c5a9f1feea8c3d936e93a25f@macports.org> #16083: gnumeric row/column labels show broken character box instead of the letter/number -------------------------------+-------------------------------------------- Reporter: bzbarsky at mit.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gnumeric | -------------------------------+-------------------------------------------- Changes (by macsforever2000 at macports.org): * port: => gnumeric * milestone: => Port Bugs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 12:29:34 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 19:29:34 -0000 Subject: [MacPorts] #16788: BUG: Error: Unable to open port: invalid command name "use_lzma" In-Reply-To: <055.5b0e2625473567146ee5098c094823b0@macports.org> References: <055.5b0e2625473567146ee5098c094823b0@macports.org> Message-ID: <064.5372bc881698ffd76fc686588b7cf6bb@macports.org> #16788: BUG: Error: Unable to open port: invalid command name "use_lzma" ----------------------------------+----------------------------------------- Reporter: milosh at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by blb at macports.org): use_lzma was recently added to trunk (r38960) so it shouldn't be used yet in Portfiles, since it wouldn't work with 1.6-based installs. Have a look at the [http://trac.macports.org/browser/trunk/dports/textproc/texinfo/Portfile texinfo port] for one way of handling lzma for now. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 12:58:00 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 19:58:00 -0000 Subject: [MacPorts] #16794: wxMaxima 0.7.5 not supported on the architecture Message-ID: <057.7d850f21c2f8d20dcc22f399122adb72@macports.org> #16794: wxMaxima 0.7.5 not supported on the architecture -----------------------------------+---------------------------------------- Reporter: carlon.luca at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: -----------------------------------+---------------------------------------- I compiled three times wxMaxima but when I try to run it I get: "You cannot open the application ?wxMaxima.app? because it is not supported on this architecture." 0.7.3a used to work. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 13:15:48 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 20:15:48 -0000 Subject: [MacPorts] #16787: xercesc 2.8.0 fails to fetch sources. source location changed In-Reply-To: <053.d70966eeb907f77d4bb7d0f4cab8946e@macports.org> References: <053.d70966eeb907f77d4bb7d0f4cab8946e@macports.org> Message-ID: <062.1f36fad775ebedeee9b1621c3d94d70f@macports.org> #16787: xercesc 2.8.0 fails to fetch sources. source location changed --------------------------------+------------------------------------------- Reporter: jwlee33 at gmail.com | Owner: chris.ridd at isode.com Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: xercesc Port: xercesc | --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * owner: macports-tickets at lists.macosforge.org => chris.ridd at isode.com * port: => xercesc * milestone: Port Updates => Port Bugs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 13:20:58 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 20:20:58 -0000 Subject: [MacPorts] #16794: wxMaxima 0.7.5 not supported on the architecture In-Reply-To: <057.7d850f21c2f8d20dcc22f399122adb72@macports.org> References: <057.7d850f21c2f8d20dcc22f399122adb72@macports.org> Message-ID: <066.cc4ac2428725407ff90f05c38c6214b0@macports.org> #16794: wxMaxima 0.7.5 not supported on the architecture ------------------------------------+--------------------------------------- Reporter: carlon.luca at gmail.com | Owner: usami-k at yc5.so-net.ne.jp Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: wxMaxima | ------------------------------------+--------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * owner: macports-tickets at lists.macosforge.org => usami-k at yc5.so- net.ne.jp * port: => wxMaxima -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 13:34:18 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 20:34:18 -0000 Subject: [MacPorts] #16691: checksum (sha1) mismatch for postgis-1.3.3.tar.gz In-Reply-To: <056.38b5ec9583fa0b081987a157c7953ecc@macports.org> References: <056.38b5ec9583fa0b081987a157c7953ecc@macports.org> Message-ID: <065.4d4e12fe3086153cfbc54b7aa8c25c39@macports.org> #16691: checksum (sha1) mismatch for postgis-1.3.3.tar.gz -----------------------------------+---------------------------------------- Reporter: aaabbbdddde at yahoo.de | Owner: frank-lists at auroralux.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: postgis checksum error Port: postgis | -----------------------------------+---------------------------------------- Comment(by blb at macports.org): A quick look into the original and new tarballs suggests the new one (at over twice the size) has gained weight through .svn directories... -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 15:26:41 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 22:26:41 -0000 Subject: [MacPorts] #16795: py25-libxslt depends on and conflicts with py25-libxml2 Message-ID: <063.44a1e8293e8017742f9020b6e92d8e5d@macports.org> #16795: py25-libxslt depends on and conflicts with py25-libxml2 ---------------------------------------------------+------------------------ Reporter: brainsik+macports at sycle.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: py25-libxslt, py25-libxml2, conflicts | Port: py25-libxslt ---------------------------------------------------+------------------------ py25-libxslt depends on py25-libxml2, but installing py25-libxslt conflicts with files installed by py25-libxml2: $ sudo port install py25-libxslt ---> Fetching py25-libxml2 ---> Verifying checksum(s) for py25-libxml2 ---> Extracting py25-libxml2 ---> Applying patches to py25-libxml2 ---> Configuring py25-libxml2 ---> Building py25-libxml2 with target build ---> Staging py25-libxml2 into destroot ---> Installing py25-libxml2 2.6.21_1 ---> Activating py25-libxml2 2.6.21_1 ---> Cleaning py25-libxml2 ---> Installing py25-libxslt 2.6.21_0 ---> Activating py25-libxslt 2.6.21_0 Error: Target org.macports.activate returned: Image error: /opt/local/lib/python2.5/site-packages/drv_libxml2.py is being used by the active py25-libxml2 port. Please deactivate this port first, or use the -f flag to force the activation. Error: Status 1 encountered during processing. Forcing the installation reveals a bunch of conflicting files: $ sudo port -f install py25-libxslt ---> Fetching py25-libxml2 ---> Verifying checksum(s) for py25-libxml2 ---> Extracting py25-libxml2 ---> Applying patches to py25-libxml2 ---> Configuring py25-libxml2 ---> Building py25-libxml2 with target build ---> Staging py25-libxml2 into destroot ---> Installing py25-libxml2 2.6.21_1 ---> Activating py25-libxml2 2.6.21_1 ---> Cleaning py25-libxml2 ---> Installing py25-libxslt 2.6.21_0 ---> Activating py25-libxslt 2.6.21_0 Warning: File /opt/local/lib/python2.5/site-packages/drv_libxml2.py already exists. Moving to: /opt/local/lib/python2.5/site- packages/drv_libxml2.py.mp_1223503147. Warning: File /opt/local/lib/python2.5/site-packages/drv_libxml2.pyc already exists. Moving to: /opt/local/lib/python2.5/site- packages/drv_libxml2.pyc.mp_1223503147. Warning: File /opt/local/lib/python2.5/site-packages/libxml2.py already exists. Moving to: /opt/local/lib/python2.5/site- packages/libxml2.py.mp_1223503147. Warning: File /opt/local/lib/python2.5/site-packages/libxml2.pyc already exists. Moving to: /opt/local/lib/python2.5/site- packages/libxml2.pyc.mp_1223503147. Warning: File /opt/local/lib/python2.5/site- packages/libxml2_python-2.6.21-py2.5.egg-info already exists. Moving to: /opt/local/lib/python2.5/site-packages/libxml2_python-2.6.21-py2.5.egg- info.mp_1223503147. Warning: File /opt/local/lib/python2.5/site-packages/libxml2mod.so already exists. Moving to: /opt/local/lib/python2.5/site- packages/libxml2mod.so.mp_1223503147. ---> Cleaning py25-libxslt -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 15:35:11 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 22:35:11 -0000 Subject: [MacPorts] #16796: graphics/gegl: maintainer update Message-ID: <054.54c354cb2c62da80e7082d346a3bd0f3@macports.org> #16796: graphics/gegl: maintainer update -------------------------------------+-------------------------------------- Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Keywords: gimp2 asciidoc python24 | Port: gegl -------------------------------------+-------------------------------------- Update gegl to 0.0.20 and disable building of docs by default. Documentation is available via variants. This avoids a hard dependency on port asciidoc which depends on python24. See [http://lists.macosforge.org/pipermail/macports- users/2008-October/011815.html] -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 15:43:40 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 22:43:40 -0000 Subject: [MacPorts] #16795: py25-libxslt depends on and conflicts with py25-libxml2 In-Reply-To: <063.44a1e8293e8017742f9020b6e92d8e5d@macports.org> References: <063.44a1e8293e8017742f9020b6e92d8e5d@macports.org> Message-ID: <072.5947770519afedbf56b118247a13423d@macports.org> #16795: py25-libxslt depends on and conflicts with py25-libxml2 ------------------------------------------+--------------------------------- Reporter: brainsik+macports at sycle.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: py25-libxslt, py25-libxml2, conflicts Port: py25-libxslt | ------------------------------------------+--------------------------------- Changes (by macsforever2000 at macports.org): * cc: brainsik+macports at sycle.net (removed) * cc: sfiera at macports.org (added) * priority: High => Normal Old description: > py25-libxslt depends on py25-libxml2, but installing py25-libxslt > conflicts with files installed by py25-libxml2: > > $ sudo port install py25-libxslt > ---> Fetching py25-libxml2 > ---> Verifying checksum(s) for py25-libxml2 > ---> Extracting py25-libxml2 > ---> Applying patches to py25-libxml2 > ---> Configuring py25-libxml2 > ---> Building py25-libxml2 with target build > ---> Staging py25-libxml2 into destroot > ---> Installing py25-libxml2 2.6.21_1 > ---> Activating py25-libxml2 2.6.21_1 > ---> Cleaning py25-libxml2 > ---> Installing py25-libxslt 2.6.21_0 > ---> Activating py25-libxslt 2.6.21_0 > Error: Target org.macports.activate returned: Image error: > /opt/local/lib/python2.5/site-packages/drv_libxml2.py is being used by > the active py25-libxml2 port. Please deactivate this port first, or use > the -f flag to force the activation. > Error: Status 1 encountered during processing. > > Forcing the installation reveals a bunch of conflicting files: > > $ sudo port -f install py25-libxslt > ---> Fetching py25-libxml2 > ---> Verifying checksum(s) for py25-libxml2 > ---> Extracting py25-libxml2 > ---> Applying patches to py25-libxml2 > ---> Configuring py25-libxml2 > ---> Building py25-libxml2 with target build > ---> Staging py25-libxml2 into destroot > ---> Installing py25-libxml2 2.6.21_1 > ---> Activating py25-libxml2 2.6.21_1 > ---> Cleaning py25-libxml2 > ---> Installing py25-libxslt 2.6.21_0 > ---> Activating py25-libxslt 2.6.21_0 > Warning: File /opt/local/lib/python2.5/site-packages/drv_libxml2.py > already exists. Moving to: /opt/local/lib/python2.5/site- > packages/drv_libxml2.py.mp_1223503147. > Warning: File /opt/local/lib/python2.5/site-packages/drv_libxml2.pyc > already exists. Moving to: /opt/local/lib/python2.5/site- > packages/drv_libxml2.pyc.mp_1223503147. > Warning: File /opt/local/lib/python2.5/site-packages/libxml2.py already > exists. Moving to: /opt/local/lib/python2.5/site- > packages/libxml2.py.mp_1223503147. > Warning: File /opt/local/lib/python2.5/site-packages/libxml2.pyc already > exists. Moving to: /opt/local/lib/python2.5/site- > packages/libxml2.pyc.mp_1223503147. > Warning: File /opt/local/lib/python2.5/site- > packages/libxml2_python-2.6.21-py2.5.egg-info already exists. Moving to: > /opt/local/lib/python2.5/site-packages/libxml2_python-2.6.21-py2.5.egg- > info.mp_1223503147. > Warning: File /opt/local/lib/python2.5/site-packages/libxml2mod.so > already exists. Moving to: /opt/local/lib/python2.5/site- > packages/libxml2mod.so.mp_1223503147. > ---> Cleaning py25-libxslt New description: py25-libxslt depends on py25-libxml2, but installing py25-libxslt conflicts with files installed by py25-libxml2: {{{ $ sudo port install py25-libxslt ---> Fetching py25-libxml2 ---> Verifying checksum(s) for py25-libxml2 ---> Extracting py25-libxml2 ---> Applying patches to py25-libxml2 ---> Configuring py25-libxml2 ---> Building py25-libxml2 with target build ---> Staging py25-libxml2 into destroot ---> Installing py25-libxml2 2.6.21_1 ---> Activating py25-libxml2 2.6.21_1 ---> Cleaning py25-libxml2 ---> Installing py25-libxslt 2.6.21_0 ---> Activating py25-libxslt 2.6.21_0 Error: Target org.macports.activate returned: Image error: /opt/local/lib/python2.5/site-packages/drv_libxml2.py is being used by the active py25-libxml2 port. Please deactivate this port first, or use the -f flag to force the activation. Error: Status 1 encountered during processing. }}} Forcing the installation reveals a bunch of conflicting files: {{{ $ sudo port -f install py25-libxslt ---> Fetching py25-libxml2 ---> Verifying checksum(s) for py25-libxml2 ---> Extracting py25-libxml2 ---> Applying patches to py25-libxml2 ---> Configuring py25-libxml2 ---> Building py25-libxml2 with target build ---> Staging py25-libxml2 into destroot ---> Installing py25-libxml2 2.6.21_1 ---> Activating py25-libxml2 2.6.21_1 ---> Cleaning py25-libxml2 ---> Installing py25-libxslt 2.6.21_0 ---> Activating py25-libxslt 2.6.21_0 Warning: File /opt/local/lib/python2.5/site-packages/drv_libxml2.py already exists. Moving to: /opt/local/lib/python2.5/site- packages/drv_libxml2.py.mp_1223503147. Warning: File /opt/local/lib/python2.5/site-packages/drv_libxml2.pyc already exists. Moving to: /opt/local/lib/python2.5/site- packages/drv_libxml2.pyc.mp_1223503147. Warning: File /opt/local/lib/python2.5/site-packages/libxml2.py already exists. Moving to: /opt/local/lib/python2.5/site- packages/libxml2.py.mp_1223503147. Warning: File /opt/local/lib/python2.5/site-packages/libxml2.pyc already exists. Moving to: /opt/local/lib/python2.5/site- packages/libxml2.pyc.mp_1223503147. Warning: File /opt/local/lib/python2.5/site- packages/libxml2_python-2.6.21-py2.5.egg-info already exists. Moving to: /opt/local/lib/python2.5/site-packages/libxml2_python-2.6.21-py2.5.egg- info.mp_1223503147. Warning: File /opt/local/lib/python2.5/site-packages/libxml2mod.so already exists. Moving to: /opt/local/lib/python2.5/site- packages/libxml2mod.so.mp_1223503147. ---> Cleaning py25-libxslt }}} -- Comment: Ccing maintainer of py25-libxml2 who might have some insight. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 15:49:05 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 22:49:05 -0000 Subject: [MacPorts] #16797: ilmbase needs build dependency on gsed Message-ID: <054.89648d16d0555c76cfa18c99151cacef@macports.org> #16797: ilmbase needs build dependency on gsed --------------------------------+------------------------------------------- Reporter: waterson at maubi.net | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: --------------------------------+------------------------------------------- The "ilmbase" port is missing a build-time dependency on gsed. ---> Building ilmbase with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ilmbase/work/ilmbase-1.0.1" && make all " returned error 2 Command output: Making all in Half if /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../config -I../config -I/opt/local/include -pipe -O2 -D_THREAD_SAFE -Wno-long-double -MT eLut.o -MD -MP -MF ".deps/eLut.Tpo" -c -o eLut.o eLut.cpp; \ then mv -f ".deps/eLut.Tpo" ".deps/eLut.Po"; else rm -f ".deps/eLut.Tpo"; exit 1; fi /bin/sh ../libtool --tag=CXX --mode=link /usr/bin/g++-4.0 -pipe -O2 -D_THREAD_SAFE -Wno-long-double -L/opt/local/lib -o eLut eLut.o ../libtool: line 390: /opt/local/bin/gsed: No such file or directory ../libtool: line 789: /opt/local/bin/gsed: No such file or directory /bin/echo: write: Broken pipe : ignoring unknown tag ../libtool: line 789: /opt/local/bin/gsed: No such file or directory *** Warning: inferring the mode of operation is deprecated. *** Future versions of Libtool will require --mode=MODE be specified. : warning: cannot infer operation mode from `/usr/bin/g++-4.0' : you must specify a MODE Try ` --help' for more information. make[1]: *** [eLut] Error 1 make: *** [all-recursive] Error 1 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 15:55:06 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 22:55:06 -0000 Subject: [MacPorts] #16797: ilmbase needs build dependency on gsed In-Reply-To: <054.89648d16d0555c76cfa18c99151cacef@macports.org> References: <054.89648d16d0555c76cfa18c99151cacef@macports.org> Message-ID: <063.aff0bc3d55cd3d2b8b3a39222ad932c3@macports.org> #16797: ilmbase needs build dependency on gsed ---------------------------------+------------------------------------------ Reporter: waterson at maubi.net | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: ilmbase | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * cc: waterson at maubi.net (removed) * owner: macports-tickets at lists.macosforge.org => waqar at macports.org * port: => ilmbase Old description: > The "ilmbase" port is missing a build-time dependency on gsed. > > ---> Building ilmbase with target all > Error: Target org.macports.build returned: shell command " cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ilmbase/work/ilmbase-1.0.1" > && make all " returned error 2 > Command output: Making all in Half > if /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../config -I../config > -I/opt/local/include -pipe -O2 -D_THREAD_SAFE -Wno-long-double -MT > eLut.o -MD -MP -MF ".deps/eLut.Tpo" -c -o eLut.o eLut.cpp; \ > then mv -f ".deps/eLut.Tpo" ".deps/eLut.Po"; else rm -f > ".deps/eLut.Tpo"; exit 1; fi > /bin/sh ../libtool --tag=CXX --mode=link /usr/bin/g++-4.0 -pipe -O2 > -D_THREAD_SAFE -Wno-long-double -L/opt/local/lib -o eLut eLut.o > ../libtool: line 390: /opt/local/bin/gsed: No such file or directory > ../libtool: line 789: /opt/local/bin/gsed: No such file or directory > /bin/echo: write: Broken pipe > : ignoring unknown tag > ../libtool: line 789: /opt/local/bin/gsed: No such file or directory > *** Warning: inferring the mode of operation is deprecated. > *** Future versions of Libtool will require --mode=MODE be specified. > : warning: cannot infer operation mode from `/usr/bin/g++-4.0' > : you must specify a MODE > Try ` --help' for more information. > make[1]: *** [eLut] Error 1 > make: *** [all-recursive] Error 1 New description: The "ilmbase" port is missing a build-time dependency on gsed. {{{ ---> Building ilmbase with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ilmbase/work/ilmbase-1.0.1" && make all " returned error 2 Command output: Making all in Half if /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../config -I../config -I/opt/local/include -pipe -O2 -D_THREAD_SAFE -Wno-long-double -MT eLut.o -MD -MP -MF ".deps/eLut.Tpo" -c -o eLut.o eLut.cpp; \ then mv -f ".deps/eLut.Tpo" ".deps/eLut.Po"; else rm -f ".deps/eLut.Tpo"; exit 1; fi /bin/sh ../libtool --tag=CXX --mode=link /usr/bin/g++-4.0 -pipe -O2 -D_THREAD_SAFE -Wno-long-double -L/opt/local/lib -o eLut eLut.o ../libtool: line 390: /opt/local/bin/gsed: No such file or directory ../libtool: line 789: /opt/local/bin/gsed: No such file or directory /bin/echo: write: Broken pipe : ignoring unknown tag ../libtool: line 789: /opt/local/bin/gsed: No such file or directory *** Warning: inferring the mode of operation is deprecated. *** Future versions of Libtool will require --mode=MODE be specified. : warning: cannot infer operation mode from `/usr/bin/g++-4.0' : you must specify a MODE Try ` --help' for more information. make[1]: *** [eLut] Error 1 make: *** [all-recursive] Error 1 }}} -- Comment: Assigning to maintainer. Please use WikiFormatting in the future. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 16:18:16 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 23:18:16 -0000 Subject: [MacPorts] #16798: gnumeric fails to build on Leopard Message-ID: <058.5c50022913950f6f7a35c6c6b63e1e3d@macports.org> #16798: gnumeric fails to build on Leopard ------------------------------------+--------------------------------------- Reporter: mvanier at cs.caltech.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gnumeric | Port: ------------------------------------+--------------------------------------- I've managed to compile all the dependencies of gnumeric, but the gnumeric compile itself fails: [...lots of output omitted...] mkdir .libs /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I../.. -DGNOMELOCALEDIR=\"/opt/local/share/locale\" -DGNUMERIC_DATADIR=\"/opt/local/share/gnumeric/1.9.0\" -I../.. -I../../src -I../../src/tools -DGNUMERIC_INTERNAL -DXTHREADS -D_REENTRANT -DORBIT2=1 -I/opt/local/include/libgoffice-0.6 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/libgsf-1 -I/opt/local/include/libxml2 -I/opt/local/include/gtk-2.0 -I/opt/local/include/libglade-2.0 -I/opt/local/include/libart-2.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/libgnomeui-2.0 -I/opt/local/include/gconf/2 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libgnome-2.0 -I/opt/local/include/libbonoboui-2.0 -I/opt/local/include/libgnomecanvas-2.0 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include -I/opt/local/include/orbit-2.0 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo- activation-2.0 -I/opt/local/include/gail-1.0 -I/opt/local/include -O2 -DG_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -Wall -Wmissing-prototypes -Wsign-compare -Wpointer-arith -Wnested-externs -Wchar-subscripts -Wwrite-strings -Wdeclaration-after-statement -Wnested- externs -Wmissing-noreturn -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wno-pointer-sign -MT dao-gui-utils.lo -MD -MP -MF .deps/dao-gui-utils.Tpo -c dao-gui-utils.c -fno-common -DPIC -o .libs /dao-gui-utils.o In file included from dao-gui-utils.h:35, from dao-gui-utils.c:30: tool-dialogs.h:63: error: syntax error before 'GtkSignalFunc' tool-dialogs.h:66: warning: function declaration isn't a prototype dao-gui-utils.c:86: error: syntax error before 'GtkSignalFunc' dao-gui-utils.c: In function 'dialog_tool_init_outputs': dao-gui-utils.c:87: error: number of arguments doesn't match prototype dao-gui-utils.h:42: error: prototype declaration dao-gui-utils.c:90: error: 'state' undeclared (first use in this function) dao-gui-utils.c:90: error: (Each undeclared identifier is reported only once dao-gui-utils.c:90: error: for each function it appears in.) dao-gui-utils.c:101: error: 'sensitivity_cb' undeclared (first use in this function) make[4]: *** [dao-gui-utils.lo] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 16:57:03 2008 From: noreply at macports.org (MacPorts) Date: Wed, 08 Oct 2008 23:57:03 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.ab7c009095dd977c0a3a90b869f4a905@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by mp at dpj.sent.com): Replying to [comment:16 aoeumacports@?]: > [*] Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-aOhufhZy8k: No such file or directory) I'm seeing the exact same thing as you on intel 10.5.5. I think the problem has to do with dbus autolaunch. I can get gnucash to work fine by starting gnucash with {{{ # dbus-launch gnucash }}} or by using dbus-launch to set the DBUS_SESSION_ADDRESS and DBUS_SESSION_PID environment variables first with (in sh, bash, or zsh) {{{ # eval `dbus-launch --sh-syntax` }}} Once this is done, then gnucash will start up fine because it has access to the session dbus daemon. If gnucash (or any program that uses dbus) doesn't have access to the session dbus daemon (via the env variables above), it will use the dbus autolaunch functionality. This has worked in the past, but doesn't seem to work properly with dbus-1.2.4. Actually, the dbus documentation suggests that autolaunch is not the best idea ("it can be suboptimal or even broken"), so perhaps the dbus port should suggest putting the above code in users' login scripts. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 17:13:42 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 00:13:42 -0000 Subject: [MacPorts] #13719: Problematic auto-uninstall In-Reply-To: <053.b2b876cadabdce11409865263c6f30a9@macports.org> References: <053.b2b876cadabdce11409865263c6f30a9@macports.org> Message-ID: <062.f8e802105b36fc164d360515a418948e@macports.org> #13719: Problematic auto-uninstall --------------------------------+------------------------------------------- Reporter: khalsah at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.6.0 Resolution: fixed | Keywords: Port: | --------------------------------+------------------------------------------- Changes (by jmr at macports.org): * cc: jmr at macports.org (added) * status: new => closed * resolution: => fixed Comment: This should be taken care of by r37442. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 21:57:48 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 04:57:48 -0000 Subject: [MacPorts] #16799: RFE: pcre: Enable readline by default Message-ID: <055.ed7e7ee722c4b1edc72061fb1cef0461@macports.org> #16799: RFE: pcre: Enable readline by default ---------------------------------+------------------------------------------ Reporter: raimue at macports.org | Owner: nox at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: Keywords: | Port: pcre ---------------------------------+------------------------------------------ The pcretest tool supports readline, but it has to be enabled with a configure switch. Since readline is such a basic library and many other ports depend on it, I think it would be good to include this by default. Patch attached. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Wed Oct 8 23:06:09 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 06:06:09 -0000 Subject: [MacPorts] #16798: gnumeric fails to build on Leopard In-Reply-To: <058.5c50022913950f6f7a35c6c6b63e1e3d@macports.org> References: <058.5c50022913950f6f7a35c6c6b63e1e3d@macports.org> Message-ID: <067.d18e1bfa2f093ea83a6511f5a9071bfc@macports.org> #16798: gnumeric fails to build on Leopard -------------------------------------+-------------------------------------- Reporter: mvanier at cs.caltech.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnumeric Port: gnumeric | -------------------------------------+-------------------------------------- Changes (by jmr at macports.org): * port: => gnumeric Old description: > I've managed to compile all the dependencies of gnumeric, but the > gnumeric compile itself fails: > > [...lots of output omitted...] > > mkdir .libs > /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I../.. > -DGNOMELOCALEDIR=\"/opt/local/share/locale\" > -DGNUMERIC_DATADIR=\"/opt/local/share/gnumeric/1.9.0\" -I../.. > -I../../src -I../../src/tools -DGNUMERIC_INTERNAL -DXTHREADS -D_REENTRANT > -DORBIT2=1 -I/opt/local/include/libgoffice-0.6 > -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include > -I/opt/local/include -I/opt/local/include/libgsf-1 > -I/opt/local/include/libxml2 -I/opt/local/include/gtk-2.0 > -I/opt/local/include/libglade-2.0 -I/opt/local/include/libart-2.0 > -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 > -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 > -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 > -I/opt/local/include/libpng12 -I/usr/X11R6/include > -I/opt/local/include/libgnomeui-2.0 -I/opt/local/include/gconf/2 > -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libgnome-2.0 > -I/opt/local/include/libbonoboui-2.0 > -I/opt/local/include/libgnomecanvas-2.0 -I/opt/local/include/gnome- > vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include > -I/opt/local/include/orbit-2.0 -I/opt/local/include/dbus-1.0 > -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/libbonobo-2.0 > -I/opt/local/include/bonobo-activation-2.0 -I/opt/local/include/gail-1.0 > -I/opt/local/include -O2 -DG_DISABLE_DEPRECATED > -DPANGO_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED > -DGDK_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_DISABLE_DEPRECATED > -DLIBGLADE_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED > -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -Wall > -Wmissing-prototypes -Wsign-compare -Wpointer-arith -Wnested-externs > -Wchar-subscripts -Wwrite-strings -Wdeclaration-after-statement -Wnested- > externs -Wmissing-noreturn -Wstrict-prototypes -Wmissing-prototypes > -Wmissing-declarations -Wno-pointer-sign -MT dao-gui-utils.lo -MD -MP -MF > .deps/dao-gui-utils.Tpo -c dao-gui-utils.c -fno-common -DPIC -o .libs > /dao-gui-utils.o > In file included from dao-gui-utils.h:35, > from dao-gui-utils.c:30: > tool-dialogs.h:63: error: syntax error before 'GtkSignalFunc' > tool-dialogs.h:66: warning: function declaration isn't a prototype > dao-gui-utils.c:86: error: syntax error before 'GtkSignalFunc' > dao-gui-utils.c: In function 'dialog_tool_init_outputs': > dao-gui-utils.c:87: error: number of arguments doesn't match prototype > dao-gui-utils.h:42: error: prototype declaration > dao-gui-utils.c:90: error: 'state' undeclared (first use in this > function) > dao-gui-utils.c:90: error: (Each undeclared identifier is reported only > once > dao-gui-utils.c:90: error: for each function it appears in.) > dao-gui-utils.c:101: error: 'sensitivity_cb' undeclared (first use in > this function) > make[4]: *** [dao-gui-utils.lo] Error 1 > make[3]: *** [all-recursive] Error 1 > make[2]: *** [all] Error 2 > make[1]: *** [all-recursive] Error 1 > make: *** [all] Error 2 > > Error: Status 1 encountered during processing. New description: I've managed to compile all the dependencies of gnumeric, but the gnumeric compile itself fails: {{{ [...lots of output omitted...] mkdir .libs /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I../.. -DGNOMELOCALEDIR=\"/opt/local/share/locale\" -DGNUMERIC_DATADIR=\"/opt/local/share/gnumeric/1.9.0\" -I../.. -I../../src -I../../src/tools -DGNUMERIC_INTERNAL -DXTHREADS -D_REENTRANT -DORBIT2=1 -I/opt/local/include/libgoffice-0.6 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/libgsf-1 -I/opt/local/include/libxml2 -I/opt/local/include/gtk-2.0 -I/opt/local/include/libglade-2.0 -I/opt/local/include/libart-2.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/libgnomeui-2.0 -I/opt/local/include/gconf/2 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libgnome-2.0 -I/opt/local/include/libbonoboui-2.0 -I/opt/local/include/libgnomecanvas-2.0 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include -I/opt/local/include/orbit-2.0 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo- activation-2.0 -I/opt/local/include/gail-1.0 -I/opt/local/include -O2 -DG_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -Wall -Wmissing-prototypes -Wsign-compare -Wpointer-arith -Wnested-externs -Wchar-subscripts -Wwrite-strings -Wdeclaration-after-statement -Wnested- externs -Wmissing-noreturn -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wno-pointer-sign -MT dao-gui-utils.lo -MD -MP -MF .deps/dao-gui-utils.Tpo -c dao-gui-utils.c -fno-common -DPIC -o .libs /dao-gui-utils.o In file included from dao-gui-utils.h:35, from dao-gui-utils.c:30: tool-dialogs.h:63: error: syntax error before 'GtkSignalFunc' tool-dialogs.h:66: warning: function declaration isn't a prototype dao-gui-utils.c:86: error: syntax error before 'GtkSignalFunc' dao-gui-utils.c: In function 'dialog_tool_init_outputs': dao-gui-utils.c:87: error: number of arguments doesn't match prototype dao-gui-utils.h:42: error: prototype declaration dao-gui-utils.c:90: error: 'state' undeclared (first use in this function) dao-gui-utils.c:90: error: (Each undeclared identifier is reported only once dao-gui-utils.c:90: error: for each function it appears in.) dao-gui-utils.c:101: error: 'sensitivity_cb' undeclared (first use in this function) make[4]: *** [dao-gui-utils.lo] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. }}} -- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 01:27:28 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 08:27:28 -0000 Subject: [MacPorts] #16788: BUG: Error: Unable to open port: invalid command name "use_lzma" In-Reply-To: <055.5b0e2625473567146ee5098c094823b0@macports.org> References: <055.5b0e2625473567146ee5098c094823b0@macports.org> Message-ID: <064.057a67729e81c3f2c5333e84a39bb546@macports.org> #16788: BUG: Error: Unable to open port: invalid command name "use_lzma" ----------------------------------+----------------------------------------- Reporter: milosh at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by milosh at macports.org): Yes, that's what I did. However, I'm surprised that a feature that is present in trunk fails to be understood in trunk. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 04:46:48 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 11:46:48 -0000 Subject: [MacPorts] #13612: tiff 3.8.2 build fails In-Reply-To: <054.e6eb8714c429a5a640fd9ff84647c25e@macports.org> References: <054.e6eb8714c429a5a640fd9ff84647c25e@macports.org> Message-ID: <063.640d1509558e2a204747eb646697abc9@macports.org> #13612: tiff 3.8.2 build fails ---------------------------------+------------------------------------------ Reporter: malier at lsi.upc.edu | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment(by MrLight at nao.homelinux.com): Hi. here same problem: --------------------------------------------------------------------------------------- # sudo port install tiff ---> Building tiff with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_tiff/work/tiff-3.8.2" && make all " returned error 2 Command output: tiffgt.c:177: warning: implicit declaration of function 'glutSpecialFunc' tiffgt.c:178: warning: implicit declaration of function 'glutMainLoop' tiffgt.c: In function 'setWindowSize': tiffgt.c:279: warning: implicit declaration of function 'glutReshapeWindow' tiffgt.c: In function 'raster_draw': tiffgt.c:285: warning: implicit declaration of function 'glDrawPixels' tiffgt.c:285: error: 'GL_RGBA' undeclared (first use in this function) tiffgt.c:285: error: 'GL_UNSIGNED_BYTE' undeclared (first use in this function) tiffgt.c:285: error: syntax error before 'GLvoid' tiffgt.c: In function 'raster_reshape': tiffgt.c:291: error: 'GLfloat' undeclared (first use in this function) tiffgt.c:291: error: syntax error before 'xratio' tiffgt.c:293: error: 'xratio' undeclared (first use in this function) tiffgt.c:293: error: 'yratio' undeclared (first use in this function) tiffgt.c:295: warning: implicit declaration of function 'glPixelZoom' tiffgt.c:296: warning: implicit declaration of function 'glViewport' tiffgt.c:299: warning: implicit declaration of function 'glutSetWindowTitle' tiffgt.c: In function 'raster_keys': tiffgt.c:344: warning: implicit declaration of function 'glutPostRedisplay' tiffgt.c:303: warning: unused parameter 'x' tiffgt.c:303: warning: unused parameter 'y' tiffgt.c: In function 'raster_special': tiffgt.c:351: error: 'GLUT_KEY_PAGE_UP' undeclared (first use in this function) tiffgt.c:365: error: 'GLUT_KEY_PAGE_DOWN' undeclared (first use in this function) tiffgt.c:378: error: 'GLUT_KEY_HOME' undeclared (first use in this function) tiffgt.c:385: error: 'GLUT_KEY_END' undeclared (first use in this function) tiffgt.c:348: warning: unused parameter 'x' tiffgt.c:348: warning: unused parameter 'y' make[1]: *** [tiffgt-tiffgt.o] Error 1 make: *** [all-recursive] Error 1 Error: Status 1 encountered during processing. LeoOne:~ root# --------------------------------------------------------------------------------------- Systemversion: Mac OS X 10.5.5 (9F33) Kernel-Version: Darwin 9.5.0 Intel Core 2 Duo fresh MaCports install "MacPorts-1.6.0-10.5-Leopard.dmg" --------------------------------------------------------------------------------------- root# port MacPorts 1.600 Entering interactive mode... ("help" for help, "quit" to quit) [var/root] > version Version: 1.600 [var/root] > quit Goodbye --------------------------------------------------------------------------------------- If You need more infos, please contact me. I simply tryed to install: ImageMagick I need it for typo3 (sudo port install ImageMagick) Installation stops et try to install tiff What should I do? thx 4 audience ... Mr Light :-) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 05:04:46 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 12:04:46 -0000 Subject: [MacPorts] #13612: tiff 3.8.2 build fails In-Reply-To: <054.e6eb8714c429a5a640fd9ff84647c25e@macports.org> References: <054.e6eb8714c429a5a640fd9ff84647c25e@macports.org> Message-ID: <063.b5b35e33d6b229af344b7d74f672e1b5@macports.org> #13612: tiff 3.8.2 build fails ---------------------------------+------------------------------------------ Reporter: malier at lsi.upc.edu | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment(by MrLight at nao.homelinux.com): sorry for conected code. this editor seems only to accept only double CR Mr Light -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 06:55:27 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 13:55:27 -0000 Subject: [MacPorts] #16800: qgit.app fails to find git executable Message-ID: <061.40bce31a7ca49bae8adfeda8e1b3e028@macports.org> #16800: qgit.app fails to find git executable ---------------------------------------+------------------------------------ Reporter: swinbank at transientskp.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: qgit ---------------------------------------+------------------------------------ qgit runs git --exec-path on startup to find the core git executables. Assuming git is installed through Macports, the git executable lives in /opt/local/bin. If qgit is run through the command line, and this is in $PATH, everything is fine. However, if qgit is run through /Applications/MacPorts/qgit.app, the path does not include /opt/local/bin. git --exec-path therefore fails, and gqit reports: {{{ An error occurred while executing command: git --exec-path Git says: Unable to start the process! }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 07:15:36 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 14:15:36 -0000 Subject: [MacPorts] #13612: tiff 3.8.2 build fails In-Reply-To: <054.e6eb8714c429a5a640fd9ff84647c25e@macports.org> References: <054.e6eb8714c429a5a640fd9ff84647c25e@macports.org> Message-ID: <063.7230e135daa94b30cff785fa11f9a81f@macports.org> #13612: tiff 3.8.2 build fails ---------------------------------+------------------------------------------ Reporter: malier at lsi.upc.edu | Owner: waqar at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.5.2 Resolution: | Keywords: ---------------------------------+------------------------------------------ Comment(by MrLight at nao.homelinux.com): Uninstalling XCode 3.0 and installing XCode 3.1.1 solves the problem Mr Light :-) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 08:22:20 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 15:22:20 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.369e51d8b67d3793c616c5de65d8e937@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by macsforever2000 at macports.org): Replying to [comment:17 mp@?]: {{{ # eval `dbus-launch --sh-syntax` }}} I added this to my .bash_profile and gnucash works normally for me too now. Thanks for the workaround! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 12:39:23 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 19:39:23 -0000 Subject: [MacPorts] #16801: asciidoc depends on python24, no option for later versions of python Message-ID: <056.851ed040edc3c59bb2e10d9c6c03f00e@macports.org> #16801: asciidoc depends on python24, no option for later versions of python ----------------------------------+----------------------------------------- Reporter: ducleotide at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gimp2 asciidoc gegl | Port: asciidoc ----------------------------------+----------------------------------------- This issue popped up when I tried to upgrade gimp2 to gimp 2.6. I have python25 installed and do not want to install python24. gegl depends on asciidoc and there was a ticket submitted to optionally include asciidoc. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 12:46:24 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 19:46:24 -0000 Subject: [MacPorts] #16801: asciidoc depends on python24, no option for later versions of python In-Reply-To: <056.851ed040edc3c59bb2e10d9c6c03f00e@macports.org> References: <056.851ed040edc3c59bb2e10d9c6c03f00e@macports.org> Message-ID: <065.56ee46c2a4b5a5d7974ec76cc70b4dd3@macports.org> #16801: asciidoc depends on python24, no option for later versions of python -----------------------------------+---------------------------------------- Reporter: ducleotide at gmail.com | Owner: boeyms at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: gimp2 asciidoc gegl Port: asciidoc | -----------------------------------+---------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => boeyms at macports.org * type: defect => enhancement * milestone: Port Bugs => Port Enhancements Comment: Assigning to maintainer. If you can submit a patch, that would be helpful. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 12:54:37 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 19:54:37 -0000 Subject: [MacPorts] #16802: Installing gimp2 fails due to gtk2 error: "Error: Unable to execute port: can't read "configure.universal_sysroot": no such variable" Message-ID: <054.89120c190313b8e4ca75eb8110332433@macports.org> #16802: Installing gimp2 fails due to gtk2 error: "Error: Unable to execute port: can't read "configure.universal_sysroot": no such variable" ----------------------------------------------------+----------------------- Reporter: koch.manuel at web.de | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gtk2 gimp2 configure.universal_sysroot | Port: gimp2 gtk2 ----------------------------------------------------+----------------------- I'm newto macport and tried to install Gimp 2.6 on my Mac OS X 10.4. The following output was printed on the console when the error happened : {{{ sudo port -d install gimp2 +universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2 DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2 DEBUG: Requested variant darwin is not provided by port gimp2. DEBUG: Requested variant i386 is not provided by port gimp2. DEBUG: Requested variant macosx is not provided by port gimp2. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl DEBUG: Requested variant darwin is not provided by port gegl. DEBUG: Requested variant i386 is not provided by port gegl. DEBUG: Requested variant macosx is not provided by port gegl. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: gegl DEBUG: Didn't find receipt, going to depspec regex for: gegl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib DEBUG: Requested variant darwin is not provided by port aalib. DEBUG: Requested variant i386 is not provided by port aalib. DEBUG: Requested variant macosx is not provided by port aalib. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: aalib DEBUG: Didn't find receipt, going to depspec regex for: aalib DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: Requested variant darwin is not provided by port curl. DEBUG: Requested variant i386 is not provided by port curl. DEBUG: Requested variant macosx is not provided by port curl. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: curl DEBUG: Didn't find receipt, going to depspec regex for: curl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl DEBUG: Requested variant darwin is not provided by port libart_lgpl. DEBUG: Requested variant i386 is not provided by port libart_lgpl. DEBUG: Requested variant macosx is not provided by port libart_lgpl. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: libart_lgpl DEBUG: Didn't find receipt, going to depspec regex for: libart_lgpl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif DEBUG: Requested variant darwin is not provided by port libexif. DEBUG: Requested variant i386 is not provided by port libexif. DEBUG: Requested variant macosx is not provided by port libexif. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: libexif DEBUG: Didn't find receipt, going to depspec regex for: libexif DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui DEBUG: Requested variant darwin is not provided by port libgnomeui. DEBUG: Requested variant i386 is not provided by port libgnomeui. DEBUG: Requested variant macosx is not provided by port libgnomeui. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: libgnomeui DEBUG: Didn't find receipt, going to depspec regex for: libgnomeui DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng DEBUG: Requested variant darwin is not provided by port libmng. DEBUG: Requested variant i386 is not provided by port libmng. DEBUG: Requested variant macosx is not provided by port libmng. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: libmng DEBUG: Didn't find receipt, going to depspec regex for: libmng DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/librsvg DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/librsvg DEBUG: Requested variant darwin is not provided by port librsvg. DEBUG: Requested variant i386 is not provided by port librsvg. DEBUG: Requested variant macosx is not provided by port librsvg. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: librsvg DEBUG: Didn't find receipt, going to depspec regex for: librsvg DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf DEBUG: Requested variant darwin is not provided by port libwmf. DEBUG: Requested variant i386 is not provided by port libwmf. DEBUG: Requested variant macosx is not provided by port libwmf. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: libwmf DEBUG: Didn't find receipt, going to depspec regex for: libwmf DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -xml-parser DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -xml-parser DEBUG: Requested variant darwin is not provided by port p5-xml-parser. DEBUG: Requested variant i386 is not provided by port p5-xml-parser. DEBUG: Requested variant macosx is not provided by port p5-xml-parser. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: p5-xml-parser DEBUG: Didn't find receipt, going to depspec regex for: p5-xml-parser DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler DEBUG: Requested variant darwin is not provided by port poppler. DEBUG: Requested variant i386 is not provided by port poppler. DEBUG: Requested variant macosx is not provided by port poppler. DEBUG: Executing variant universal provides universal DEBUG: Executing variant x11 provides x11 DEBUG: Searching for dependency: poppler DEBUG: Didn't find receipt, going to depspec regex for: poppler DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www /webkit-gtk DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www /webkit-gtk DEBUG: Requested variant darwin is not provided by port webkit-gtk. DEBUG: Requested variant i386 is not provided by port webkit-gtk. DEBUG: Requested variant macosx is not provided by port webkit-gtk. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: webkit-gtk DEBUG: Didn't find receipt, going to depspec regex for: webkit-gtk DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk DEBUG: Requested variant darwin is not provided by port py25-gtk. DEBUG: Requested variant i386 is not provided by port py25-gtk. DEBUG: Requested variant macosx is not provided by port py25-gtk. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: py25-gtk DEBUG: Didn't find receipt, going to depspec regex for: py25-gtk DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/babl DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/babl DEBUG: Requested variant darwin is not provided by port babl. DEBUG: Requested variant i386 is not provided by port babl. DEBUG: Requested variant macosx is not provided by port babl. DEBUG: Executing variant universal provides universal DEBUG: Searching for dependency: babl DEBUG: Didn't find receipt, going to depspec regex for: babl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 DEBUG: can't read "configure.universal_sysroot": no such variable while executing "configure.env-append CUPS_CONFIG="${configure.universal_sysroot}/usr/bin/cups-config"" invoked from within "if {[variant_isset universal]} { configure.env-append CUPS_CONFIG="${configure.universal_sysroot}/usr/bin/cups-config" }" (file "Portfile" line 39) invoked from within "source Portfile" invoked from within "$workername eval source Portfile" (procedure "mportopen" line 46) invoked from within "mportopen $porturl $options $variations" (procedure "mportdepends" line 62) invoked from within "mportdepends $subport "" $recurseDeps $skipSatisfied $accDeps" (procedure "mportdepends" line 87) invoked from within "mportdepends $mport $target" (procedure "mportexec" line 21) invoked from within "mportexec $workername $target" Error: Unable to execute port: can't read "configure.universal_sysroot": no such variable }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 12:59:07 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 19:59:07 -0000 Subject: [MacPorts] #16800: qgit.app fails to find git executable In-Reply-To: <061.40bce31a7ca49bae8adfeda8e1b3e028@macports.org> References: <061.40bce31a7ca49bae8adfeda8e1b3e028@macports.org> Message-ID: <070.f9bea3a5c3fd67c1c44a67fc5d48e802@macports.org> #16800: qgit.app fails to find git executable ----------------------------------------+----------------------------------- Reporter: swinbank at transientskp.org | Owner: ocroquette at free.fr Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: qgit | ----------------------------------------+----------------------------------- Changes (by blb at macports.org): * owner: macports-tickets at lists.macosforge.org => ocroquette at free.fr -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 13:27:39 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 20:27:39 -0000 Subject: [MacPorts] #16803: graphics/gimp2: maintainer update to 2.6.1 Message-ID: <054.e013754cc802ef497914d6025b96874a@macports.org> #16803: graphics/gimp2: maintainer update to 2.6.1 -------------------------------------+-------------------------------------- Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Keywords: help browser gtk-webkit | Port: gimp2 -------------------------------------+-------------------------------------- Update to version 2.6.1 and disable apparently broken help browser for now. Help browser can be restored with variant +help_browser. Add livecheck. See also update to dependency gegl #16796. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 13:44:05 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 20:44:05 -0000 Subject: [MacPorts] #16802: Installing gimp2 fails due to gtk2 error: "Error: Unable to execute port: can't read "configure.universal_sysroot": no such variable" In-Reply-To: <054.89120c190313b8e4ca75eb8110332433@macports.org> References: <054.89120c190313b8e4ca75eb8110332433@macports.org> Message-ID: <063.97e6de81f872e70eed31a9a44c00a0f5@macports.org> #16802: Installing gimp2 fails due to gtk2 error: "Error: Unable to execute port: can't read "configure.universal_sysroot": no such variable" ---------------------------------+------------------------------------------ Reporter: koch.manuel at web.de | Owner: dbevans at gmail.com Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gtk2 gimp2 configure.universal_sysroot Port: gimp2 gtk2 | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => dbevans at gmail.com Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 13:50:31 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 20:50:31 -0000 Subject: [MacPorts] #16803: graphics/gimp2: maintainer update to 2.6.1 In-Reply-To: <054.e013754cc802ef497914d6025b96874a@macports.org> References: <054.e013754cc802ef497914d6025b96874a@macports.org> Message-ID: <063.9ba977491d01e262306e4b0435577693@macports.org> #16803: graphics/gimp2: maintainer update to 2.6.1 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: help browser gtk-webkit Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by macsforever2000 at macports.org): I'm seeing the following error when I apply the patch: {{{ $ sudo patch -p0 Portfile patch-gimp2-Portfile.diff patching file Portfile Hunk #5 FAILED at 80. 1 out of 5 hunks FAILED -- saving rejects to file Portfile.rej }}} I verified that I had the latest Portfile from svn. Also, is your email address correct in the portfile? It says "dbevans" but your email on this ticket is "db.evans". -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 14:18:13 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 21:18:13 -0000 Subject: [MacPorts] #16803: graphics/gimp2: maintainer update to 2.6.1 In-Reply-To: <054.e013754cc802ef497914d6025b96874a@macports.org> References: <054.e013754cc802ef497914d6025b96874a@macports.org> Message-ID: <063.6bebcac44679c73ac888b2665867625a@macports.org> #16803: graphics/gimp2: maintainer update to 2.6.1 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: help browser gtk-webkit Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Sorry for the foul-up. Am posting a new diff that works locally. As to the email, gmail now sees db.evans and dbevans as the same address and I've been trying to get rid of the dot. Thanks for the help. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 14:52:08 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 21:52:08 -0000 Subject: [MacPorts] #16803: graphics/gimp2: maintainer update to 2.6.1 In-Reply-To: <054.e013754cc802ef497914d6025b96874a@macports.org> References: <054.e013754cc802ef497914d6025b96874a@macports.org> Message-ID: <063.09a157202e86d331ffa2dda55ca0a121@macports.org> #16803: graphics/gimp2: maintainer update to 2.6.1 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: help browser gtk-webkit Port: gimp2 | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 14:58:14 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 21:58:14 -0000 Subject: [MacPorts] #16803: graphics/gimp2: maintainer update to 2.6.1 In-Reply-To: <054.e013754cc802ef497914d6025b96874a@macports.org> References: <054.e013754cc802ef497914d6025b96874a@macports.org> Message-ID: <063.8af62bc65edb4a0856593d58f3365285@macports.org> #16803: graphics/gimp2: maintainer update to 2.6.1 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: help browser gtk-webkit Port: gimp2 | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40650. I fixed a typo on "webkit-gtk" which was spelled "gtk-webkit" in the patch. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 15:05:16 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 22:05:16 -0000 Subject: [MacPorts] #16802: Installing gimp2 fails due to gtk2 error: "Error: Unable to execute port: can't read "configure.universal_sysroot": no such variable" In-Reply-To: <054.89120c190313b8e4ca75eb8110332433@macports.org> References: <054.89120c190313b8e4ca75eb8110332433@macports.org> Message-ID: <063.d8c8c01ba5ef0155f7c8fa5f3558b914@macports.org> #16802: Installing gimp2 fails due to gtk2 error: "Error: Unable to execute port: can't read "configure.universal_sysroot": no such variable" ---------------------------------+------------------------------------------ Reporter: koch.manuel at web.de | Owner: nox at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gtk2 gimp2 configure.universal_sysroot Port: gtk2 | ---------------------------------+------------------------------------------ Changes (by blb at macports.org): * owner: dbevans at gmail.com => nox at macports.org * port: gimp2 gtk2 => gtk2 Comment: It appears that {{{configure.universal_sysroot}}} is currently a trunk- only variable, which makes some universal work difficult (I have a couple of updates for ports using this variable). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 15:06:46 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 22:06:46 -0000 Subject: [MacPorts] #16803: graphics/gimp2: maintainer update to 2.6.1 In-Reply-To: <054.e013754cc802ef497914d6025b96874a@macports.org> References: <054.e013754cc802ef497914d6025b96874a@macports.org> Message-ID: <063.f68da7b5bd60bbd16e410b4b13d36912@macports.org> #16803: graphics/gimp2: maintainer update to 2.6.1 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: help browser gtk-webkit Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by db.evans at gmail.com): Not my day, I guess. Thanks again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 15:13:24 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 22:13:24 -0000 Subject: [MacPorts] #16796: graphics/gegl: maintainer update In-Reply-To: <054.54c354cb2c62da80e7082d346a3bd0f3@macports.org> References: <054.54c354cb2c62da80e7082d346a3bd0f3@macports.org> Message-ID: <063.7f9bd6b447bb4663d8368b0a2280ecd5@macports.org> #16796: graphics/gegl: maintainer update ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: | Keywords: gimp2 asciidoc python24 Port: gegl | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 15:17:01 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 22:17:01 -0000 Subject: [MacPorts] #16796: graphics/gegl: maintainer update In-Reply-To: <054.54c354cb2c62da80e7082d346a3bd0f3@macports.org> References: <054.54c354cb2c62da80e7082d346a3bd0f3@macports.org> Message-ID: <063.235711ae5a5c1472db838ce8503307ad@macports.org> #16796: graphics/gegl: maintainer update ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: gimp2 asciidoc python24 Port: gegl | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40651. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 16:02:48 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 23:02:48 -0000 Subject: [MacPorts] #16783: UPGRADE glade 2.12.2: fix build problem In-Reply-To: <054.3c26d28f7a7922ed594c92b0fa5b9217@macports.org> References: <054.3c26d28f7a7922ed594c92b0fa5b9217@macports.org> Message-ID: <063.b2b8fc8394dec5b2207737f4bc705248@macports.org> #16783: UPGRADE glade 2.12.2: fix build problem ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: devans at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: | Keywords: gtk2 Port: glade | ---------------------------------+------------------------------------------ Changes (by devans at macports.org): * owner: macports-tickets at lists.macosforge.org => devans at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 16:02:55 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 23:02:55 -0000 Subject: [MacPorts] #16804: New maintainer e-mail address Message-ID: <056.803ffaa8fd1ed6f74186d564e4b7a57c@macports.org> #16804: New maintainer e-mail address ----------------------------------+----------------------------------------- Reporter: lionteeth at cogweb.net | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: transcode ----------------------------------+----------------------------------------- -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 16:20:40 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 23:20:40 -0000 Subject: [MacPorts] #12914: "cd" TCL procedure should not be used in Portfiles anymore In-Reply-To: <052.94b03854b72c2866ff7c4a50f8a4f572@macports.org> References: <052.94b03854b72c2866ff7c4a50f8a4f572@macports.org> Message-ID: <061.26401c5cc89cfeb6f95a334abdea72e9@macports.org> #12914: "cd" TCL procedure should not be used in Portfiles anymore -------------------------------+-------------------------------------------- Reporter: nox at macports.org | Owner: ryandesign at macports.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Changes (by jmr at macports.org): * cc: nox at macports.org, ryandesign at macports.org (removed) * cc: gwright at macports.org, mww at macports.org, waqar at macports.org (added) Comment: All nomaintainer and openmaintainer ports are now fixed. Ryan's script now shows 72 affected ports (two of which are false hits, incidentally). Adding the main offenders to cc. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 16:43:05 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 23:43:05 -0000 Subject: [MacPorts] #16512: cgit-0.7.1 and git-1.5.3.5 Checksum mismatches In-Reply-To: <061.483ff0e46eba895da3506481bab2663c@macports.org> References: <061.483ff0e46eba895da3506481bab2663c@macports.org> Message-ID: <070.07573da3df1b530c1fe5e95945fd0272@macports.org> #16512: cgit-0.7.1 and git-1.5.3.5 Checksum mismatches ----------------------------------------+----------------------------------- Reporter: edricp+macports at gmail.com | Owner: sfiera at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ----------------------------------------+----------------------------------- Comment(by edricp+macports at gmail.com): Sorry, don't want to pester... but is this getting fixed soon? Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 16:54:42 2008 From: noreply at macports.org (MacPorts) Date: Thu, 09 Oct 2008 23:54:42 -0000 Subject: [MacPorts] #16783: UPGRADE glade 2.12.2: fix build problem In-Reply-To: <054.3c26d28f7a7922ed594c92b0fa5b9217@macports.org> References: <054.3c26d28f7a7922ed594c92b0fa5b9217@macports.org> Message-ID: <063.ef56d4d89c94a0b8c1afba3565b0461e@macports.org> #16783: UPGRADE glade 2.12.2: fix build problem ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: devans at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: gtk2 Port: glade | ---------------------------------+------------------------------------------ Changes (by devans at macports.org): * status: assigned => closed * resolution: => fixed Comment: Changes committed in r40661 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 17:49:20 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 00:49:20 -0000 Subject: [MacPorts] #16805: ghc-6.8.2 build failure - 'Bus error' while making Adjustor.c Message-ID: <060.fd0d41e5f3d08a8d8476cc5312859a6c@macports.org> #16805: ghc-6.8.2 build failure - 'Bus error' while making Adjustor.c ------------------------------------------+--------------------------------- Reporter: mike.vasiljevs at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: ghc haskell make "Bus error" | Port: ghc ------------------------------------------+--------------------------------- {{{port -v install ghc}}} Make existed with Bus error: {{{ ------------------------------------------------------------------------ == make all -r; in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_ghc/work/ghc-6.8.2/rts ------------------------------------------------------------------------ ../compiler/ghc-inplace -optc-O -optc-I/opt/local/include -optc-Wall -optc-W -optc-Wstrict-prototypes -optc-Wmissing-prototypes -optc-Wmissing- declarations -optc-Winline -optc-Waggregate-return -optc-I../includes -optc-I. -optc-Iparallel -optc-Ism -optc-DCOMPILING_RTS -optc-fomit-frame- pointer -optc-I/opt/local/include -optc-I../gmp/gmpbuild -optc-fno-strict- aliasing -H16m -O -I/opt/local/include -L/opt/local/lib -optc-O2 -package- name rts -static -I/opt/local/include -I../gmp/gmpbuild -I. -#include HCIncludes.h -dcmm-lint -c Adjustor.c -o Adjustor.o make[1]: *** [Adjustor.o] Bus error make: *** [stage1] Error 1 Warning: the following items did not execute (for ghc): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing.}}} machine details: {{{uname -a Darwin Mikes-ibook.local 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh powerpc}}} {{{gcc -v Using built-in specs. Target: powerpc-apple-darwin8 Configured with: /var/tmp/gcc/gcc-5370~2/src/configure --disable-checking -enable-werror --prefix=/usr --mandir=/share/man --enable- languages=c,objc,c++,obj-c++ --program-transform- name=/^[cg][^.-]*$/s/$/-4.0/ --with-gxx-include-dir=/include/c++/4.0.0 --with-slibdir=/usr/lib --build=powerpc-apple-darwin8 --host=powerpc- apple-darwin8 --target=powerpc-apple-darwin8 Thread model: posix gcc version 4.0.1 (Apple Computer, Inc. build 5370)}}} }}} regards mike -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 18:25:27 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 01:25:27 -0000 Subject: [MacPorts] #16805: ghc-6.8.2 build failure - 'Bus error' while making Adjustor.c In-Reply-To: <060.fd0d41e5f3d08a8d8476cc5312859a6c@macports.org> References: <060.fd0d41e5f3d08a8d8476cc5312859a6c@macports.org> Message-ID: <069.2e04dd417ff04b9d94da0ad66970fa59@macports.org> #16805: ghc-6.8.2 build failure - 'Bus error' while making Adjustor.c ---------------------------------------+------------------------------------ Reporter: mike.vasiljevs at gmail.com | Owner: gwright at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: ghc haskell make "Bus error" Port: ghc | ---------------------------------------+------------------------------------ Changes (by blb at macports.org): * owner: macports-tickets at lists.macosforge.org => gwright at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 19:02:50 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 02:02:50 -0000 Subject: [MacPorts] #16804: New maintainer e-mail address In-Reply-To: <056.803ffaa8fd1ed6f74186d564e4b7a57c@macports.org> References: <056.803ffaa8fd1ed6f74186d564e4b7a57c@macports.org> Message-ID: <065.ab1018c8bb6cf6352d8e25afadb09cd8@macports.org> #16804: New maintainer e-mail address -----------------------------------+---------------------------------------- Reporter: lionteeth at cogweb.net | Owner: macsforever2000 at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: transcode | -----------------------------------+---------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 19:04:02 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 02:04:02 -0000 Subject: [MacPorts] #16804: New maintainer e-mail address In-Reply-To: <056.803ffaa8fd1ed6f74186d564e4b7a57c@macports.org> References: <056.803ffaa8fd1ed6f74186d564e4b7a57c@macports.org> Message-ID: <065.41d939c4f06ebbb0c62a940a60cea525@macports.org> #16804: New maintainer e-mail address -----------------------------------+---------------------------------------- Reporter: lionteeth at cogweb.net | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: transcode | -----------------------------------+---------------------------------------- Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40662. I also obfuscated the email address. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 19:43:40 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 02:43:40 -0000 Subject: [MacPorts] #16754: libxml2-2.7.1 create ${prefix}/etc/xml In-Reply-To: <052.ba95b00a9460cba4b41e6267d209e124@macports.org> References: <052.ba95b00a9460cba4b41e6267d209e124@macports.org> Message-ID: <061.a48ddb20156022e02d29659157ee6693@macports.org> #16754: libxml2-2.7.1 create ${prefix}/etc/xml -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macsforever2000 at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: libxml2 | -------------------------------+-------------------------------------------- Changes (by macsforever2000 at macports.org): * owner: cedric.luthi at gmail.com => macsforever2000 at macports.org * status: new => assigned Comment: Maintainer timeout. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 19:44:57 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 02:44:57 -0000 Subject: [MacPorts] #16754: libxml2-2.7.1 create ${prefix}/etc/xml In-Reply-To: <052.ba95b00a9460cba4b41e6267d209e124@macports.org> References: <052.ba95b00a9460cba4b41e6267d209e124@macports.org> Message-ID: <061.51288c7dd6f9b9110d0327e8ff7dab48@macports.org> #16754: libxml2-2.7.1 create ${prefix}/etc/xml -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: macsforever2000 at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: libxml2 | -------------------------------+-------------------------------------------- Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40663. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 20:07:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 03:07:43 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.5651b795fe767cc52d165e1914e9e085@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by mp at dpj.sent.com): I can confirm that this error is a dbus problem, not a gnucash problem: {{{ Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-aOhufhZy8k: No such file or directory) }}} I compiled a simple test program (from the dbus docs) which has a similar error. When there is no current session dbus daemon instance, libdbus uses an 'autolaunch' feature which seems to be broken. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 20:47:05 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 03:47:05 -0000 Subject: [MacPorts] #16801: asciidoc depends on python24, no option for later versions of python In-Reply-To: <056.851ed040edc3c59bb2e10d9c6c03f00e@macports.org> References: <056.851ed040edc3c59bb2e10d9c6c03f00e@macports.org> Message-ID: <065.53c03e44929725791b93b8d781292cf3@macports.org> #16801: asciidoc depends on python24, no option for later versions of python -----------------------------------+---------------------------------------- Reporter: ducleotide at gmail.com | Owner: boeyms at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: gimp2 asciidoc gegl Port: asciidoc | -----------------------------------+---------------------------------------- Comment(by mmw at macports.org): Replying to [comment:2 macsforever2000@?]: > Assigning to maintainer. If you can submit a patch, that would be helpful. > Hi Boey, do you keep or not? if not I think I could do something saturday -tsch?ss -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 20:58:22 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 03:58:22 -0000 Subject: [MacPorts] #16803: graphics/gimp2: maintainer update to 2.6.1 In-Reply-To: <054.e013754cc802ef497914d6025b96874a@macports.org> References: <054.e013754cc802ef497914d6025b96874a@macports.org> Message-ID: <063.9448a466e7a2bc756eae7c24eda95031@macports.org> #16803: graphics/gimp2: maintainer update to 2.6.1 ---------------------------------+------------------------------------------ Reporter: db.evans at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: help browser gtk-webkit Port: gimp2 | ---------------------------------+------------------------------------------ Comment(by myschizobuddy at gmail.com): one more thing regarding help. without help build in, it gives you the option of going online and viewing the help. but when you click on it, it complains about not having GIO backend and gvfs should be installed. Looking at the configure script. it uses one of the 4 libs to connect to the web, gvfs, gnomefs, curl or wget. gvfs is the prefered method and it doesn't work. I'll try gnomefs, curl and wget and see which one takes you online for help. that also means that curl is an optional dependency. if gnomefs works then curl isn't needed. more testing is needed to resolve this help issue. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 21:30:01 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 04:30:01 -0000 Subject: [MacPorts] #16801: asciidoc depends on python24, no option for later versions of python In-Reply-To: <056.851ed040edc3c59bb2e10d9c6c03f00e@macports.org> References: <056.851ed040edc3c59bb2e10d9c6c03f00e@macports.org> Message-ID: <065.8d2ec8b9b8a512011560b21abccf48cc@macports.org> #16801: asciidoc depends on python24, no option for later versions of python -----------------------------------+---------------------------------------- Reporter: ducleotide at gmail.com | Owner: boeyms at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: gimp2 asciidoc gegl Port: asciidoc | -----------------------------------+---------------------------------------- Comment(by myschizobuddy at gmail.com): you just have to change port:python24 to port:python25. asciidoc compiles for python 2.5 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 22:04:53 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 05:04:53 -0000 Subject: [MacPorts] #16512: cgit-0.7.1 and git-1.5.3.5 Checksum mismatches In-Reply-To: <061.483ff0e46eba895da3506481bab2663c@macports.org> References: <061.483ff0e46eba895da3506481bab2663c@macports.org> Message-ID: <070.c6b2f27fa0ad84fb0e2afbc6e61c5c22@macports.org> #16512: cgit-0.7.1 and git-1.5.3.5 Checksum mismatches ----------------------------------------+----------------------------------- Reporter: edricp+macports at gmail.com | Owner: sfiera at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ----------------------------------------+----------------------------------- Comment(by sfiera at macports.org): I've committed the first part of the fix, which updates cgit to 0.8 and fixes the checksum error. I'm getting link errors related to iconv, though, which prevent it from building successfully. You could try a sync/clean/install but it isn't working for me yet. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Thu Oct 9 23:26:19 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 06:26:19 -0000 Subject: [MacPorts] #16806: unarchive.args for xar in portunarchive.tcl is wrong Message-ID: <052.5e8531a7f02dfe81984fdad2c2da8eba@macports.org> #16806: unarchive.args for xar in portunarchive.tcl is wrong -----------------------------------+---------------------------------------- Reporter: blb at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: archive unarchive xar | Port: -----------------------------------+---------------------------------------- Attaching a really simple patch to fix unarchive.args for xar in base/src/package1.0/portunarchive.tcl (xar interprets the dot as a file to extract so this fails). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 00:38:40 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 07:38:40 -0000 Subject: [MacPorts] #12896: NEW: fpc-2.2.0 In-Reply-To: <050.03cb084d3d2b9b12e2cee8d5275eb307@macports.org> References: <050.03cb084d3d2b9b12e2cee8d5275eb307@macports.org> Message-ID: <059.88143cf770cff5c2c971bfb53127ee55@macports.org> #12896: NEW: fpc-2.2.0 -----------------------------+---------------------------------------------- Reporter: jbacon at mcw.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.5.2 Resolution: | Keywords: fpc pascal Port: | -----------------------------+---------------------------------------------- Comment(by boeyms at macports.org): Replying to [comment:4 jmr@?]: > Is fpcbins.tar.gz some binaries that you built yourself? Why can't they be built from source? In order to build fpc, you need to have (among other things) a Pascal compiler already installed, since it is written in Pascal. The binary installation available from www.freepascal.org is only available on a disk image. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 00:46:35 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 07:46:35 -0000 Subject: [MacPorts] #16807: splint-3.1.1 Update to 3.1.2 Message-ID: <055.51bb5c852fec541dd4c2333a31054e56@macports.org> #16807: splint-3.1.1 Update to 3.1.2 ---------------------------------+------------------------------------------ Reporter: boeyms at macports.org | Owner: waqar at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: ---------------------------------+------------------------------------------ The attached patch updates splint from 3.1.1 to 3.1.2, and adds a patch from the splint CVS repository to fix building on Darwin (see [http://splint.cvs.sourceforge.net/viewvc/splint/splint/src/osd.c?view=log]). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 01:03:27 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 08:03:27 -0000 Subject: [MacPorts] #12896: NEW: fpc-2.2.0 In-Reply-To: <050.03cb084d3d2b9b12e2cee8d5275eb307@macports.org> References: <050.03cb084d3d2b9b12e2cee8d5275eb307@macports.org> Message-ID: <059.41c4d0327b283082b288b536e18162a9@macports.org> #12896: NEW: fpc-2.2.0 -----------------------------+---------------------------------------------- Reporter: jbacon at mcw.edu | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.5.2 Resolution: | Keywords: fpc pascal Port: | -----------------------------+---------------------------------------------- Comment(by ryandesign at macports.org): Replying to [comment:7 boeyms@?]: > In order to build fpc, you need to have (among other things) a Pascal compiler already installed, since it is written in Pascal. The binary installation available from www.freepascal.org is only available on a disk image. If you want to have the port build this file, disk images are not a problem. Support for extracting from disk images will be in MacPorts 1.7.0 with the {{{use_dmg yes}}} option. Or you can do it manually, like the isightcapture port does. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 01:49:22 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 08:49:22 -0000 Subject: [MacPorts] #16808: RFE: saving/restoring installed ports Message-ID: <052.f9df2a2dabd5af20f4fe643269bbb9ae@macports.org> #16808: RFE: saving/restoring installed ports ------------------------------+--------------------------------------------- Reporter: romy2k at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.6.0 Keywords: | Port: ------------------------------+--------------------------------------------- Would be great to be able to save a list of installed ports, with variants, to then restore with a single command on another machine. This includes subsets of ports. Would greatly help with migration, fresh installs, etc. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:07:59 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:07:59 -0000 Subject: [MacPorts] #16695: unrar 3.7.8 does not install In-Reply-To: <056.9bd89f89a47d1929ac2dd537a0712364@macports.org> References: <056.9bd89f89a47d1929ac2dd537a0712364@macports.org> Message-ID: <065.d8a4b792ad4faa2870c52d66c01de8db@macports.org> #16695: unrar 3.7.8 does not install -----------------------------------+---------------------------------------- Reporter: jcpetruzza at gmail.com | Owner: nox at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: unrar | -----------------------------------+---------------------------------------- Changes (by nox at macports.org): * status: new => closed * resolution: => fixed Comment: r40672 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:09:24 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:09:24 -0000 Subject: [MacPorts] #16809: pcre++ broken link Message-ID: <051.6884302632a9c021c7b3f7f2304d8f9c@macports.org> #16809: pcre++ broken link -----------------------------+---------------------------------------------- Reporter: bstern2 at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: -----------------------------+---------------------------------------------- The author for pcre++ has changed his website drasticly hence macports cannot ge to the new address with seems to be on .mac storage for the download. http://www.daemon.de/idisk/scip/Apps/pcre++/pcre++-0.9.5.tar.gz seems to be the new master site for PCRE++ in its present form. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:10:55 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:10:55 -0000 Subject: [MacPorts] #15318: glib2: Fix dependencies. In-Reply-To: <052.b8c312e2c764c3a0fbf6ee8b55166b68@macports.org> References: <052.b8c312e2c764c3a0fbf6ee8b55166b68@macports.org> Message-ID: <061.9efd9f3ad96d705daa721a62321d9ecb@macports.org> #15318: glib2: Fix dependencies. -------------------------------+-------------------------------------------- Reporter: nox at macports.org | Owner: ryandesign at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------+-------------------------------------------- Comment(by nox at macports.org): ping? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:26:21 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:26:21 -0000 Subject: [MacPorts] #16700: Remove libgtkhtml312 port In-Reply-To: <064.60fa71e14ba08634763eafb35ccf49c0@macports.org> References: <064.60fa71e14ba08634763eafb35ccf49c0@macports.org> Message-ID: <073.de019f995ab1e6fd315bd14469753d43@macports.org> #16700: Remove libgtkhtml312 port -------------------------------------------+-------------------------------- Reporter: macsforever2000 at macports.org | Owner: nox at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: libgtkhtml3 Port: libgtkhtml312 | -------------------------------------------+-------------------------------- Changes (by nox at macports.org): * status: new => closed * resolution: => fixed Comment: r40673 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:27:27 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:27:27 -0000 Subject: [MacPorts] #16698: Remove eel-2-12 port In-Reply-To: <064.8e7edc04fe1ddeb9011f79b289573532@macports.org> References: <064.8e7edc04fe1ddeb9011f79b289573532@macports.org> Message-ID: <073.b48b224aec07f966d2df312dfece76b8@macports.org> #16698: Remove eel-2-12 port -------------------------------------------+-------------------------------- Reporter: macsforever2000 at macports.org | Owner: nox at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: eel Port: eel-2-12 | -------------------------------------------+-------------------------------- Changes (by nox at macports.org): * status: new => closed * resolution: => fixed Comment: heh. I'm not a box! r40674 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:29:09 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:29:09 -0000 Subject: [MacPorts] #16688: gail +quartz conflicts with gtk2 +quartz In-Reply-To: <064.31eefbe77611830155931ed3e723cf51@macports.org> References: <064.31eefbe77611830155931ed3e723cf51@macports.org> Message-ID: <073.199f29ace6a687e79de0f90a51334762@macports.org> #16688: gail +quartz conflicts with gtk2 +quartz -------------------------------------------+-------------------------------- Reporter: macsforever2000 at macports.org | Owner: nox at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: gail, gtk2 | -------------------------------------------+-------------------------------- Comment(by nox at macports.org): r40675 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:29:14 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:29:14 -0000 Subject: [MacPorts] #16688: gail +quartz conflicts with gtk2 +quartz In-Reply-To: <064.31eefbe77611830155931ed3e723cf51@macports.org> References: <064.31eefbe77611830155931ed3e723cf51@macports.org> Message-ID: <073.6ca11237f0aac7bd53b4e99b4a88c43c@macports.org> #16688: gail +quartz conflicts with gtk2 +quartz -------------------------------------------+-------------------------------- Reporter: macsforever2000 at macports.org | Owner: nox at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: gail, gtk2 | -------------------------------------------+-------------------------------- Changes (by nox at macports.org): * status: assigned => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:38:06 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:38:06 -0000 Subject: [MacPorts] #16655: libxslt update to 1.1.24 In-Reply-To: <052.f020dc77057188fc2a05e5469437ca54@macports.org> References: <052.f020dc77057188fc2a05e5469437ca54@macports.org> Message-ID: <061.1b2a34f8579d84ebc70bd949de2a7fd5@macports.org> #16655: libxslt update to 1.1.24 -------------------------------+-------------------------------------------- Reporter: blb at macports.org | Owner: nox at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: libxslt | -------------------------------+-------------------------------------------- Changes (by nox at macports.org): * status: new => closed * resolution: => fixed Comment: r40676. Feel free to commit the changes yourself next time as this port is openmaintained. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:38:31 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:38:31 -0000 Subject: [MacPorts] #16517: libxslt-1.1-23 Config error - build failure In-Reply-To: <055.9e1156c05ed0613418cf004e2f6d2aaf@macports.org> References: <055.9e1156c05ed0613418cf004e2f6d2aaf@macports.org> Message-ID: <064.eb107928750f0d13cd3775d6c73a4696@macports.org> #16517: libxslt-1.1-23 Config error - build failure ----------------------------------+----------------------------------------- Reporter: awclayton at gmail.com | Owner: nox at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: libxslt build failure Port: libxslt | ----------------------------------+----------------------------------------- Changes (by nox at macports.org): * status: new => closed * resolution: => fixed Comment: r40676 (see #16655) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:42:09 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:42:09 -0000 Subject: [MacPorts] #16354: "man ls" doesn't work properly after installing coreutils In-Reply-To: <058.4061b85d4fa14fed314e86ad282642e3@macports.org> References: <058.4061b85d4fa14fed314e86ad282642e3@macports.org> Message-ID: <067.7770332c9a756f3755af6a82e68d36e8@macports.org> #16354: "man ls" doesn't work properly after installing coreutils -------------------------------------+-------------------------------------- Reporter: mvanier at cs.caltech.edu | Owner: nox at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: duplicate | Keywords: Port: | -------------------------------------+-------------------------------------- Changes (by nox at macports.org): * status: new => closed * resolution: => duplicate Comment: #15864 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 03:43:01 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 10:43:01 -0000 Subject: [MacPorts] #16799: RFE: pcre: Enable readline by default In-Reply-To: <055.ed7e7ee722c4b1edc72061fb1cef0461@macports.org> References: <055.ed7e7ee722c4b1edc72061fb1cef0461@macports.org> Message-ID: <064.49a9a4f3feb367667c77f37ebe59a812@macports.org> #16799: RFE: pcre: Enable readline by default ----------------------------------+----------------------------------------- Reporter: raimue at macports.org | Owner: nox at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: Resolution: fixed | Keywords: Port: pcre | ----------------------------------+----------------------------------------- Changes (by nox at macports.org): * status: new => closed * resolution: => fixed Comment: r40677 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 05:52:48 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 12:52:48 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.d448b46fe2836880086b345120ad5d61@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by benlight at mac.com): Replying to [comment:12 macsforever2000@?]: > This is the Tcl bug again. Once again: > > {{{ > sudo port clean py25-zlib > sudo port install gnucash > }}} > > If it stops again, do the same with the last port that tries to build. > IT WORKS! Thank you very much ;-) The solution, as stated above: {{{ sudo port clean py25-zlib sudo port install gnucash }}} If the install fails simply repeat, keep going, it took me several attempts, but eventually it worked. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 06:11:58 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 13:11:58 -0000 Subject: [MacPorts] #16810: py25-sympy-0.5.15 Upgrade to 0.6.2 Message-ID: <054.e11da42097c9aed3e837b888ba5793f8@macports.org> #16810: py25-sympy-0.5.15 Upgrade to 0.6.2 --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: py25-sympy --------------------------------+------------------------------------------- Upgrade to 0.6.2 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 06:28:06 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 13:28:06 -0000 Subject: [MacPorts] #15864: coreutils +with_default_names creates broken man page symlinks In-Reply-To: <057.d880b42a945fa735d23f897fd10a92d3@macports.org> References: <057.d880b42a945fa735d23f897fd10a92d3@macports.org> Message-ID: <066.bfe5c7a837c33d141c4177e45bcfefd0@macports.org> #15864: coreutils +with_default_names creates broken man page symlinks ------------------------------------+--------------------------------------- Reporter: jason.dusek at gmail.com | Owner: nox at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: Port: | ------------------------------------+--------------------------------------- Changes (by nox at macports.org): * status: new => closed * resolution: => worksforme Comment: I don't know where the problem is, the manpages are gzipped by the internal MacPorts destroot code and links are also corrected accordingly. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 08:03:07 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 15:03:07 -0000 Subject: [MacPorts] #15137: nant 0.85 fails to build under Mono 1.9 In-Reply-To: <051.b3e3807ef9862bbdd0735ec85597c1fe@macports.org> References: <051.b3e3807ef9862bbdd0735ec85597c1fe@macports.org> Message-ID: <060.8220e4debe035afacc42543663aa6457@macports.org> #15137: nant 0.85 fails to build under Mono 1.9 ------------------------------+--------------------------------------------- Reporter: aronnax at umd.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: ------------------------------+--------------------------------------------- Comment(by dbueno at gmail.com): This also works for me, using mono 2.0. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 08:07:42 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 15:07:42 -0000 Subject: [MacPorts] #7277: Protect .ht* files case insensitively by default (apache2 port) In-Reply-To: <066.b4088784dc462f427298f6fae888ed84@macports.org> References: <066.b4088784dc462f427298f6fae888ed84@macports.org> Message-ID: <075.921cf4cdd1cfbffd4ec7cd94827347b0@macports.org> #7277: Protect .ht* files case insensitively by default (apache2 port) ---------------------------------------------+------------------------------ Reporter: opendarwin-2006 at ryandesign.com | Owner: imajes at macports.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: Resolution: | Keywords: Port: | ---------------------------------------------+------------------------------ Comment(by nox at macports.org): this ticket is a security issue and should be taken care of. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 08:20:53 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 15:20:53 -0000 Subject: [MacPorts] #16802: Installing gimp2 fails due to gtk2 error: "Error: Unable to execute port: can't read "configure.universal_sysroot": no such variable" In-Reply-To: <054.89120c190313b8e4ca75eb8110332433@macports.org> References: <054.89120c190313b8e4ca75eb8110332433@macports.org> Message-ID: <063.d410aca803ea083ed9977ec11eb26508@macports.org> #16802: Installing gimp2 fails due to gtk2 error: "Error: Unable to execute port: can't read "configure.universal_sysroot": no such variable" ---------------------------------+------------------------------------------ Reporter: koch.manuel at web.de | Owner: nox at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: gtk2 gimp2 configure.universal_sysroot Port: gtk2 | ---------------------------------+------------------------------------------ Changes (by nox at macports.org): * status: new => closed * resolution: => fixed Comment: r40678 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 09:29:54 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 16:29:54 -0000 Subject: [MacPorts] #16686: zabbix 1.4.6 zabbix_agentd never starts. Incorrect path in zabbix_agentd.init In-Reply-To: <059.2709ed46ecb38b26d187ee9c7e63354d@macports.org> References: <059.2709ed46ecb38b26d187ee9c7e63354d@macports.org> Message-ID: <068.6e7d052420aab733be1fb50d510484c2@macports.org> #16686: zabbix 1.4.6 zabbix_agentd never starts. Incorrect path in zabbix_agentd.init --------------------------------------+------------------------------------- Reporter: tobrien at obrienit.com.au | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: zabbix Port: | --------------------------------------+------------------------------------- Changes (by markd at macports.org): * status: new => closed * resolution: => fixed Comment: Applied the fix in r40680. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 09:54:52 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 16:54:52 -0000 Subject: [MacPorts] #16811: vim-7.2.021 puredarwin variant Message-ID: <058.29ac88f06ff8ef1037a101f413f698cf@macports.org> #16811: vim-7.2.021 puredarwin variant ---------------------------------------+------------------------------------ Reporter: probono at puredarwin.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: vim, puredarwin, haspatch | Port: vim ---------------------------------------+------------------------------------ Patch to include a +puredarwin variant so that the resulting binary can run on [http://www.puredarwin.org/ PureDarwin], where proprietary frameworks and libraries are not available -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 10:19:54 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 17:19:54 -0000 Subject: [MacPorts] #13313: variants and platforms should never return an error In-Reply-To: <051.12d66d198eb23faf243541778ba0c722@macports.org> References: <051.12d66d198eb23faf243541778ba0c722@macports.org> Message-ID: <060.aac2ecf280372c695167f22ba685369d@macports.org> #13313: variants and platforms should never return an error ------------------------------+--------------------------------------------- Reporter: edewitt at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: High | Milestone: Port Bugs Component: ports | Version: Resolution: fixed | Keywords: parsing variant Port: | ------------------------------+--------------------------------------------- Changes (by nox at macports.org): * status: new => closed * resolution: => fixed Comment: r40682 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 10:20:14 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 17:20:14 -0000 Subject: [MacPorts] #16811: vim-7.2.021 puredarwin variant In-Reply-To: <058.29ac88f06ff8ef1037a101f413f698cf@macports.org> References: <058.29ac88f06ff8ef1037a101f413f698cf@macports.org> Message-ID: <067.d19fd8ac2d770bf32418dcbfa0f5b079@macports.org> #16811: vim-7.2.021 puredarwin variant -------------------------------------+-------------------------------------- Reporter: probono at puredarwin.org | Owner: raimue at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: vim, puredarwin, haspatch Port: vim | -------------------------------------+-------------------------------------- Changes (by macsforever2000 at macports.org): * cc: probono at puredarwin.org (removed) * owner: macports-tickets at lists.macosforge.org => raimue at macports.org Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 10:24:20 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 17:24:20 -0000 Subject: [MacPorts] #16810: py25-sympy-0.5.15 Upgrade to 0.6.2 In-Reply-To: <054.e11da42097c9aed3e837b888ba5793f8@macports.org> References: <054.e11da42097c9aed3e837b888ba5793f8@macports.org> Message-ID: <063.d078ed294835363d6cbf5589cd3476ae@macports.org> #16810: py25-sympy-0.5.15 Upgrade to 0.6.2 ---------------------------------+------------------------------------------ Reporter: stromnov at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: py25-sympy | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => macsforever2000 at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 10:25:06 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 17:25:06 -0000 Subject: [MacPorts] #16810: py25-sympy-0.5.15 Upgrade to 0.6.2 In-Reply-To: <054.e11da42097c9aed3e837b888ba5793f8@macports.org> References: <054.e11da42097c9aed3e837b888ba5793f8@macports.org> Message-ID: <063.a3b21e80843783eb051155f1566b9607@macports.org> #16810: py25-sympy-0.5.15 Upgrade to 0.6.2 ---------------------------------+------------------------------------------ Reporter: stromnov at gmail.com | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: py25-sympy | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed Comment: Committed revision r40683. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 12:06:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 19:06:43 -0000 Subject: [MacPorts] #16811: vim-7.2.021 puredarwin variant In-Reply-To: <058.29ac88f06ff8ef1037a101f413f698cf@macports.org> References: <058.29ac88f06ff8ef1037a101f413f698cf@macports.org> Message-ID: <067.bd50993b904d009ec766ea015350ea8c@macports.org> #16811: vim-7.2.021 puredarwin variant -------------------------------------+-------------------------------------- Reporter: probono at puredarwin.org | Owner: raimue at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: vim, puredarwin, haspatch Port: vim | -------------------------------------+-------------------------------------- Changes (by raimue at macports.org): * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 12:11:15 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 19:11:15 -0000 Subject: [MacPorts] #16812: port submission: open-cobol 1.0 Message-ID: <061.0a80121f637db170514757638c143a16@macports.org> #16812: port submission: open-cobol 1.0 ---------------------------------------+------------------------------------ Reporter: markdigital69 at hotmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: open-cobol submission | Port: open-cobol ---------------------------------------+------------------------------------ Submission for open-cobol -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 12:23:37 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 19:23:37 -0000 Subject: [MacPorts] #16811: vim-7.2.021 puredarwin variant In-Reply-To: <058.29ac88f06ff8ef1037a101f413f698cf@macports.org> References: <058.29ac88f06ff8ef1037a101f413f698cf@macports.org> Message-ID: <067.9ac8f853dfd080b54654a1ae8bef7fca@macports.org> #16811: vim-7.2.021 puredarwin variant -------------------------------------+-------------------------------------- Reporter: probono at puredarwin.org | Owner: raimue at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: vim, puredarwin, haspatch Port: vim | -------------------------------------+-------------------------------------- Comment(by raimue at macports.org): Added the platform variant in r40687. Would it make sense to include this platform variant to vim-app as well? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 12:29:29 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 19:29:29 -0000 Subject: [MacPorts] #16813: gimp-app failed to install Message-ID: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> #16813: gimp-app failed to install --------------------------------+------------------------------------------- Reporter: asbjorn at ulsberg.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gimp install error | Port: gimp-app --------------------------------+------------------------------------------- {{{sudo port -d install gimp-app > gimp-app.log 2>&1}}} yields the attached result. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 12:42:25 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 19:42:25 -0000 Subject: [MacPorts] #16811: vim-7.2.021 puredarwin variant In-Reply-To: <058.29ac88f06ff8ef1037a101f413f698cf@macports.org> References: <058.29ac88f06ff8ef1037a101f413f698cf@macports.org> Message-ID: <067.f2496f73ee9c6d8fc01455e3c3180ba6@macports.org> #16811: vim-7.2.021 puredarwin variant -------------------------------------+-------------------------------------- Reporter: probono at puredarwin.org | Owner: raimue at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: vim, puredarwin, haspatch Port: vim | -------------------------------------+-------------------------------------- Changes (by raimue at macports.org): * status: assigned => closed * resolution: => fixed -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 12:43:21 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 19:43:21 -0000 Subject: [MacPorts] #16800: qgit.app fails to find git executable In-Reply-To: <061.40bce31a7ca49bae8adfeda8e1b3e028@macports.org> References: <061.40bce31a7ca49bae8adfeda8e1b3e028@macports.org> Message-ID: <070.68f96d13bf4284378fb11159b0379ade@macports.org> #16800: qgit.app fails to find git executable ----------------------------------------+----------------------------------- Reporter: swinbank at transientskp.org | Owner: ocroquette at free.fr Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: qgit | ----------------------------------------+----------------------------------- Comment(by ocroquette at free.fr): Understood, I will have a look. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 12:49:18 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 19:49:18 -0000 Subject: [MacPorts] #16813: gimp-app failed to install In-Reply-To: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> References: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> Message-ID: <063.5693ce55af4f214bb86284f00f27c7a2@macports.org> #16813: gimp-app failed to install ---------------------------------+------------------------------------------ Reporter: asbjorn at ulsberg.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: install error Port: | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * keywords: gimp install error => install error * port: gimp-app => Comment: This is not a gimp-app issue. Did you do what was suggested in the output? Namely: {{{ sudo ln -s libXrandr.2.dylib /usr/X11/lib/libXrandr.2.0.0.dylib }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 12:56:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 19:56:43 -0000 Subject: [MacPorts] #16312: py25-wxpython causes an error message in the Python interactive interpreter help(). In-Reply-To: <056.2f479ebb50ede92f763f9fa1e72b5c58@macports.org> References: <056.2f479ebb50ede92f763f9fa1e72b5c58@macports.org> Message-ID: <065.c7b7461bda28d21e80c3f1e2bc7f5311@macports.org> #16312: py25-wxpython causes an error message in the Python interactive interpreter help(). -----------------------------------------+---------------------------------- Reporter: paidhi at mospheira.net | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: python wxwidgets wxpython py25 Port: py25-wxpython, py-wxpython | -----------------------------------------+---------------------------------- Changes (by macsforever2000 at macports.org): * port: => py25-wxpython, py-wxpython Comment: I just tried with version 2.8.9.1 of py25-wxpython and it simply hangs. {{{ help> modules Please wait a moment while I gather a list of all available modules... }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 12:58:49 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 19:58:49 -0000 Subject: [MacPorts] #16813: gimp-app failed to install In-Reply-To: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> References: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> Message-ID: <063.a90d7cbb1560da16718d88758b6b5506@macports.org> #16813: gimp-app failed to install ---------------------------------+------------------------------------------ Reporter: asbjorn at ulsberg.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: install error Port: | ---------------------------------+------------------------------------------ Comment(by devans at macports.org): See also #16475 and #16217 for more background. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 13:44:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 20:44:43 -0000 Subject: [MacPorts] #16814: new port for ruby-pg (which could be called from rb-dbi) Message-ID: <055.e3e46d603f9ba48c5b0b3498cca27a1c@macports.org> #16814: new port for ruby-pg (which could be called from rb-dbi) ---------------------------------------+------------------------------------ Reporter: dweber at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: ruby, postgresql, dbi, pg | Port: ruby-pg ---------------------------------------+------------------------------------ I don't have the expertise with ruby macports to say that this will work, but it's a quick attempt to get ruby DBI working with postgresql83. See the other ticket on this here: http://trac.macports.org/ticket/12703 I hope that another maintainer with more ruby experience can make this work. I don't have experience and time to get it all done. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 14:21:17 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 21:21:17 -0000 Subject: [MacPorts] #16815: gnustep-base-1.16.3 Message-ID: <058.8c38f834ddaec1d6ea91406c236c9e42@macports.org> #16815: gnustep-base-1.16.3 ------------------------------------+--------------------------------------- Reporter: probono at puredarwin.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: gnustep-base, haspatch | Port: gnustep-base ------------------------------------+--------------------------------------- port update from 1.14.0 to 1.16.3 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 14:45:40 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 21:45:40 -0000 Subject: [MacPorts] #16809: pcre++ broken link In-Reply-To: <051.6884302632a9c021c7b3f7f2304d8f9c@macports.org> References: <051.6884302632a9c021c7b3f7f2304d8f9c@macports.org> Message-ID: <060.051ed9e67811404f3797f4730aad2a9a@macports.org> #16809: pcre++ broken link ------------------------------+--------------------------------------------- Reporter: bstern2 at mac.com | Owner: gwright at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: pcre++ | ------------------------------+--------------------------------------------- Changes (by macsforever2000 at macports.org): * owner: macports-tickets at lists.macosforge.org => gwright at macports.org * port: => pcre++ Comment: Assigning to maintainer. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 15:03:40 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 22:03:40 -0000 Subject: [MacPorts] #16262: netcdf update 3.6.2 -> 4.0 In-Reply-To: <054.b859a9ee38cce8cfb72961cbed84f518@macports.org> References: <054.b859a9ee38cce8cfb72961cbed84f518@macports.org> Message-ID: <063.3aea463f4e554137030ad556e9b2d8cb@macports.org> #16262: netcdf update 3.6.2 -> 4.0 ---------------------------------+------------------------------------------ Reporter: mmoll at macports.org | Owner: macsforever2000 at macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * owner: fulton at cmu.edu => macsforever2000 at macports.org * status: new => assigned Comment: Maintainer timeout. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 15:05:20 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 22:05:20 -0000 Subject: [MacPorts] #16262: netcdf update 3.6.2 -> 4.0 In-Reply-To: <054.b859a9ee38cce8cfb72961cbed84f518@macports.org> References: <054.b859a9ee38cce8cfb72961cbed84f518@macports.org> Message-ID: <063.9a796e3edad17ba5755be28588bda6cf@macports.org> #16262: netcdf update 3.6.2 -> 4.0 ---------------------------------+------------------------------------------ Reporter: mmoll at macports.org | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: netcdf | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * status: assigned => closed * resolution: => fixed * port: => netcdf Comment: I tried to run this patch, but i see the following error: {{{ checking for H5DSis_scale in -lhdf5_hl... no configure: error: Can't find the hdf5 high-level library. The high-level library is required for netCDF-4. }}} This may be an issue with the hdf5 port. I also saw this problem: {{{ checking for H5Fflush in -lhdf5... yes configure: error: Can't find the hdf5 header and/or library, or can't link a program to it. HDF5 must be built with zlib; the location of zlib must be specified for netCDF-4 with the --with-zlib option. If HDF5 was also built with szlib, then the location of szlib must also be specified with the --with-slib option. }}} For now, i commented out the configure options that you added and just did the version upgrade in r40691. Please submit a modified port if you can get those options to work. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 15:17:50 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 22:17:50 -0000 Subject: [MacPorts] #16816: Lua 5.1.4 update Message-ID: <062.a69e1e3ec25bcbffd8113b481933b63e@macports.org> #16816: Lua 5.1.4 update ----------------------------------------+----------------------------------- Reporter: andrea.damore at macports.org | Owner: pmq Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: lua | Port: lua ----------------------------------------+----------------------------------- Lua 5.1.4 is out, basically the Portfile needs three changes: change version to 5.1.4 change revision to 0 comment patchfiles -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 15:18:16 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 22:18:16 -0000 Subject: [MacPorts] #16385: Performance: No rule to make target Performance/dependencies, needed by internal-doc-all_ In-Reply-To: <059.ec08d62e61172588a162ce6a03aab8c9@macports.org> References: <059.ec08d62e61172588a162ce6a03aab8c9@macports.org> Message-ID: <068.0bed4829e5b8eb70505b167fb64c4292@macports.org> #16385: Performance: No rule to make target Performance/dependencies, needed by internal-doc-all_ --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment(by probono at puredarwin.org): After upgrading gnustep-base to 1.16.3 (http://trac.macports.org/ticket/16815), I get: {{{ objc[40229]: Class NSStream (...) Using implementation from /opt/local/GNUstep/System/Library/Libraries/libgnustep-base.dylib.1.16. autogsdoc(40229) malloc: *** mmap(size=4246773760) failed (error code=12) *** error: can't allocate region *** set a breakpoint in malloc_error_break to debug gnumake[1]: *** No rule to make target `Performance/dependencies', needed by `internal-doc-all_'. Stop. gnumake: *** [Performance.all.doc.variables] Error 2 Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 15:57:33 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 22:57:33 -0000 Subject: [MacPorts] #16817: BUG: 'port cat' appends blank line to svn version of Portfile Message-ID: <055.d7bf4629f6ce36f4627e7b4be80f4b9e@macports.org> #16817: BUG: 'port cat' appends blank line to svn version of Portfile ---------------------------------+------------------------------------------ Reporter: devans at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: MacPorts base bugs Component: ports | Version: 1.7.0 Keywords: | Port: MacPorts ---------------------------------+------------------------------------------ When using the command 'port cat port_name' to obtain a copy of a given port's Portfile, the text returned has a blank line appended relative to the svn repository version. This can be verified as follows: {{{ cp `port dir port_name` Portfile.repo // get repo copy port cat port_name > Portfile.cat // get port cat copy diff -u Portfile.repo Portfile.cat // compare them }}} Using libgweather as an example the result is {{{ --- Portfile.repo 2008-10-10 15:05:03.000000000 -0700 +++ Portfile.cat 2008-10-10 15:05:32.000000000 -0700 @@ -26,3 +26,4 @@ post-activate { system "${prefix}/bin/scrollkeeper-update" } + }}} This is a problem because if you use 'port cat' to get a presumed copy of a port's Portfile, edit it and then make a patch file for upload to Trac, the patch file will fail when applied to svn if the effect of the patch is to append additional script lines to the end of the original Portfile. If you're not appending to the end, the patch works fine. And, of course, the patch always appears to work fine locally. This apparently random on again, off again failure mode can cause you to question your sanity (as I was) if you don't recognize the pattern! I'm using MacPorts built from latest trunk. Haven't tried this with 1.6.0. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 16:19:45 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 23:19:45 -0000 Subject: [MacPorts] #16813: gimp-app failed to install In-Reply-To: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> References: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> Message-ID: <063.74ae82e6aa9b449f59cf27e1950ae5e8@macports.org> #16813: gimp-app failed to install ---------------------------------+------------------------------------------ Reporter: asbjorn at ulsberg.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: install error Port: | ---------------------------------+------------------------------------------ Comment(by asbjorn at ulsberg.no): Thanks. I ran the command and tried to install again. Attached is a 7-Zip compressed archive with the log file (the uncompressed file was over 10MB) of the installation process as it went after the symbolic link had been created. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 16:29:09 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 23:29:09 -0000 Subject: [MacPorts] #16817: BUG: 'port cat' appends blank line to svn version of Portfile In-Reply-To: <055.d7bf4629f6ce36f4627e7b4be80f4b9e@macports.org> References: <055.d7bf4629f6ce36f4627e7b4be80f4b9e@macports.org> Message-ID: <064.8e52847868c2d63abed04fc9118c55aa@macports.org> #16817: BUG: 'port cat' appends blank line to svn version of Portfile ----------------------------------+----------------------------------------- Reporter: devans at macports.org | Owner: raimue at macports.org Type: defect | Status: assigned Priority: High | Milestone: MacPorts base bugs Component: ports | Version: 1.7.0 Resolution: | Keywords: Port: MacPorts | ----------------------------------+----------------------------------------- Changes (by raimue at macports.org): * owner: macports-tickets at lists.macosforge.org => raimue at macports.org * status: new => assigned -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 16:34:43 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 23:34:43 -0000 Subject: [MacPorts] #16818: igraph-0.5.1 New port Message-ID: <054.ee2f6a14c0ed12f44d0b0498b0a7111f@macports.org> #16818: igraph-0.5.1 New port --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | Port: igraph --------------------------------+------------------------------------------- math/igraph-0.5.1 High perfomance graph library for C -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 16:36:11 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 23:36:11 -0000 Subject: [MacPorts] #16817: BUG: 'port cat' appends blank line to svn version of Portfile In-Reply-To: <055.d7bf4629f6ce36f4627e7b4be80f4b9e@macports.org> References: <055.d7bf4629f6ce36f4627e7b4be80f4b9e@macports.org> Message-ID: <064.7c51466e63b01b80e5687fd0dd38d3ef@macports.org> #16817: BUG: 'port cat' appends blank line to svn version of Portfile ----------------------------------+----------------------------------------- Reporter: devans at macports.org | Owner: raimue at macports.org Type: defect | Status: closed Priority: High | Milestone: MacPorts base bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: MacPorts | ----------------------------------+----------------------------------------- Changes (by raimue at macports.org): * status: assigned => closed * resolution: => fixed Comment: Fixed in r40693. Thanks for the catch, there was also a problem with files larger than 4096 bytes. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 16:37:41 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 23:37:41 -0000 Subject: [MacPorts] #16819: py25-igraph-0.5.1 New port Message-ID: <054.83471889a57e0bce5ce2338ec70c14ac@macports.org> #16819: py25-igraph-0.5.1 New port --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | Port: py25-igraph --------------------------------+------------------------------------------- Python bindings to math/igraph (see #16818). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 16:56:52 2008 From: noreply at macports.org (MacPorts) Date: Fri, 10 Oct 2008 23:56:52 -0000 Subject: [MacPorts] #16813: gimp-app failed to install In-Reply-To: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> References: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> Message-ID: <063.5548da6682736b96f34c544cf42944e3@macports.org> #16813: gimp-app failed to install ---------------------------------+------------------------------------------ Reporter: asbjorn at ulsberg.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: install error Port: | ---------------------------------+------------------------------------------ Comment(by devans at macports.org): {{{ unable to execute -DNDEBUG: No such file or directory error: command '-DNDEBUG' failed with exit status 1 }}} This is a common problem with python modules on Leopard. See [http://trac.macports.org/wiki/LeopardProblems] -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 17:00:47 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 00:00:47 -0000 Subject: [MacPorts] #16820: webkit-gtk RPM build error Message-ID: <058.fecf6e60553d736a8e18cb0e24eb1239@macports.org> #16820: webkit-gtk RPM build error ------------------------------------+--------------------------------------- Reporter: probono at puredarwin.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: webkit-gtk, rpm | Port: webkit-gtk ------------------------------------+--------------------------------------- webkit-gtk builds, can be archived, but creating an RPM fails: {{{ sh-3.2# port archive webkit-gtk ---> Packaging tbz2 archive for webkit-gtk r30707_1 sh-3.2# port rpm webkit-gtk ---> Creating RPM package for webkit-gtk-r30707 Error: Target org.macports.rpm returned: shell command "MP_USERECEIPTS='/opt/local/var/macports/receipts' rpmbuild -bb -v /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_www_webkit-gtk/work/webkit-gtk.spec" returned error 1 Command output: Executing(%prep): /bin/sh -e /opt/local/var/tmp/rpm- tmp.86557 + umask 022 + cd /opt/local/src/macports/BUILD + exit 0 Executing(%build): /bin/sh -e /opt/local/var/tmp/rpm-tmp.86557 + umask 022 + cd /opt/local/src/macports/BUILD + exit 0 Executing(%install): /bin/sh -e /opt/local/var/tmp/rpm-tmp.86557 + umask 022 + cd /opt/local/src/macports/BUILD + /opt/local/lib/rpm/brp-compress + /opt/local/lib/rpm/brp-strip + /opt/local/lib/rpm/brp-strip-static-archive + /opt/local/lib/rpm/brp-strip-comment-note + /opt/local/lib/rpm/brp-nobuildrootpath error: Bad exit status from /opt/local/var/tmp/rpm-tmp.86557 (%install) RPM build errors: Bad exit status from /opt/local/var/tmp/rpm-tmp.86557 (%install) Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 17:15:09 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 00:15:09 -0000 Subject: [MacPorts] #16599: py30-tkinter can't activate: Not a directory In-Reply-To: <059.d0b56908686b766130d04cba67a79c71@macports.org> References: <059.d0b56908686b766130d04cba67a79c71@macports.org> Message-ID: <068.1d2a3b81b8d7e995a6c32ae23dba6e5c@macports.org> #16599: py30-tkinter can't activate: Not a directory --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: py30-tkinter | --------------------------------------+------------------------------------- Changes (by raimue at macports.org): * cc: raimue at macports.org (added) Comment: The py30-* ports use `--prefix=${prefix}/Library/Frameworks/Python.framework/Versions/3.0` but should be using `--prefix=${prefix}` as py25-* does. The problem occurs because `${prefix}/Library/Frameworks/Python.framework/Versions/3.0/lib/python3.0` is already known to the file_map.db as a symlink. Now the requested path wants to add a new item below this path, but it fails as it hits a file and that triggers the "Not a directory" error. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 17:35:18 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 00:35:18 -0000 Subject: [MacPorts] #16815: gnustep-base-1.16.3 In-Reply-To: <058.8c38f834ddaec1d6ea91406c236c9e42@macports.org> References: <058.8c38f834ddaec1d6ea91406c236c9e42@macports.org> Message-ID: <067.58959dc795111bdf31ccddb329a27f2d@macports.org> #16815: gnustep-base-1.16.3 -------------------------------------+-------------------------------------- Reporter: probono at puredarwin.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: gnustep-base, haspatch Port: gnustep-base | -------------------------------------+-------------------------------------- Comment(by probono at puredarwin.org): Not sure this is really working that well, because: {{{ export DYLD_LIBRARY_PATH=/opt/local/GNUstep/System/Library/Libraries/:$DYLD_LIBRARY_PATH sh-3.2# /opt/local/GNUstep/System/Tools/autogsdoc objc[27246]: Class Object is implemented in both /opt/local/lib/gcc42 /libobjc-gnu.2.dylib and /usr/lib/libobjc.A.dylib. Using implementation from /usr/lib/libobjc.A.dylib. objc[27246]: Class Protocol is implemented in both /opt/local/lib/gcc42 /libobjc-gnu.2.dylib and /usr/lib/libobjc.A.dylib. Using implementation from /usr/lib/libobjc.A.dylib. objc[27246]: Class NSMutableArray is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSArray is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSMutableData is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSData is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSDate is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSMutableDictionary is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSDictionary is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSEnumerator is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSException is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSInvocation is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSMethodSignature is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSNull is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSObject is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSRunLoop is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSMutableSet is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSSet is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSTimer is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSTimeZone is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSUserDefaults is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSOutputStream is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSInputStream is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. objc[27246]: Class NSStream is implemented in both /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation and /opt/local//GNUstep/System/Library/Libraries//libgnustep- base.dylib.1.16. Using implementation from /opt/local//GNUstep/System/Library/Libraries//libgnustep-base.dylib.1.16. autogsdoc(27246) malloc: *** mmap(size=4246773760) failed (error code=12) *** error: can't allocate region *** set a breakpoint in malloc_error_break to debug Bus error }}} What's going on here? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 19:57:28 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 02:57:28 -0000 Subject: [MacPorts] #16821: qemu-usermode: homepage has changed Message-ID: <059.6c507c793984294b24d39efda25270b6@macports.org> #16821: qemu-usermode: homepage has changed -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: qemu-usermode -------------------------------------+-------------------------------------- The homepage of qemu-usermode has changed. The port lists http://fabrice.bellard.free.fr/ but when you go there it says the new address is http://bellard.org/ . This will also be the reason why the port cannot currently be fetched with MacPorts 1.6.0. (Workaround: [wiki:howto/RunningTrunk build MacPorts from trunk] or [wiki:ProblemHotlist#Fetchfailures download the distfile from our mirror].) This was originally [http://lists.macosforge.org/pipermail/macports- users/2008-October/011843.html reported by Frank J. R. Hanstick on macports-users]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 20:03:26 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 03:03:26 -0000 Subject: [MacPorts] #16822: qemu-usermode: update to 0.9.1 Message-ID: <059.46af3ef968c376d32c3373ec285abd90@macports.org> #16822: qemu-usermode: update to 0.9.1 -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: qemu-usermode -------------------------------------+-------------------------------------- qemu 0.9.1 is available so you may want to update the qemu-usermode port to that version. When you do so, you should also add the line "{{{dist_subdir qemu}}}" so that the download goes to the same directory as the qemu port. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 20:05:02 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 03:05:02 -0000 Subject: [MacPorts] #16823: qemu: update to 0.9.1 Message-ID: <059.9aafa1df4c5f2dc37ab91a043fcd2e4a@macports.org> #16823: qemu: update to 0.9.1 -------------------------------------+-------------------------------------- Reporter: ryandesign at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: qemu -------------------------------------+-------------------------------------- qemu 0.9.1 is available so we may want to update the qemu port to that version. See also #16822 which is the same request for the qemu-usermode port. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 20:05:20 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 03:05:20 -0000 Subject: [MacPorts] #16822: qemu-usermode: update to 0.9.1 In-Reply-To: <059.46af3ef968c376d32c3373ec285abd90@macports.org> References: <059.46af3ef968c376d32c3373ec285abd90@macports.org> Message-ID: <068.722bb23eb8b7bb96717275a501a36b36@macports.org> #16822: qemu-usermode: update to 0.9.1 --------------------------------------+------------------------------------- Reporter: ryandesign at macports.org | Owner: mww at macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: qemu-usermode | --------------------------------------+------------------------------------- Comment(by ryandesign at macports.org): See also #16823 which is the same request for the qemu port. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 20:18:53 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 03:18:53 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.34615fbb5b6c273a17b01326c70ece8d@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Changes (by macsforever2000 at macports.org): * status: new => closed * resolution: => worksforme Comment: Glad you got it installed! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 22:23:29 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 05:23:29 -0000 Subject: [MacPorts] #16041: update lua-numlua In-Reply-To: <062.545bd72dab28e34e9abc679ae037bff8@macports.org> References: <062.545bd72dab28e34e9abc679ae037bff8@macports.org> Message-ID: <071.c9ce8613814a2927b0043abb93c828ff@macports.org> #16041: update lua-numlua -----------------------------------------+---------------------------------- Reporter: andrea.damore at macports.org | Owner: bfulgham at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: lua numlua Port: | -----------------------------------------+---------------------------------- Changes (by andrea.damore at macports.org): * status: new => closed * resolution: => fixed Comment: I'm closing this ticket. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Fri Oct 10 22:46:02 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 05:46:02 -0000 Subject: [MacPorts] #16817: BUG: 'port cat' appends blank line to svn version of Portfile In-Reply-To: <055.d7bf4629f6ce36f4627e7b4be80f4b9e@macports.org> References: <055.d7bf4629f6ce36f4627e7b4be80f4b9e@macports.org> Message-ID: <064.e4921cfc587a2e93bce4213ca6b6e19a@macports.org> #16817: BUG: 'port cat' appends blank line to svn version of Portfile ----------------------------------+----------------------------------------- Reporter: devans at macports.org | Owner: raimue at macports.org Type: defect | Status: closed Priority: High | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Resolution: fixed | Keywords: Port: MacPorts | ----------------------------------+----------------------------------------- Changes (by jmr at macports.org): * component: ports => base -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 01:14:34 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 08:14:34 -0000 Subject: [MacPorts] #16824: mcabber: new version Message-ID: <055.aa1a7b0a0fbd9f8802b2832d81fb56f9@macports.org> #16824: mcabber: new version ---------------------------------+------------------------------------------ Reporter: simon at hitzemann.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: mcabber | Port: mcabber ---------------------------------+------------------------------------------ New upstream version of mcabber is available. Portfile also correctly depends on coreutils for gmkdir usage now. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 04:35:56 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 11:35:56 -0000 Subject: [MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? In-Reply-To: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> References: <056.5cc6a7e25ec6dbd2ae14b599023d37e9@macports.org> Message-ID: <065.885f8e9dfbf02b78ad59a4bdb787665e@macports.org> #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? ----------------------------------------+----------------------------------- Reporter: hypocrite at lawyer.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: gnucash orbit2 gconf dbus orbit dbus-glib Port: gnucash orbit2 gconf dbus | ----------------------------------------+----------------------------------- Comment(by mp at dpj.sent.com): The bug is a dbus bug which has always been there. The reason why we're seeing it now with gnucash is that gconf-2.23.0+ now use dbus. I have filed a bug and a patch upstream for dbus at https://bugs.freedesktop.org/show_bug.cgi?id=18013 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 04:38:45 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 11:38:45 -0000 Subject: [MacPorts] #16825: Upgrade privoxy to 3.0.10 Message-ID: <072.a9b8a0b958b156b29400f938581b2f66@macports.org> #16825: Upgrade privoxy to 3.0.10 --------------------------------------------------+------------------------- Reporter: dbonde+bugs+macosforge.org at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | Port: --------------------------------------------------+------------------------- Privoxy is, since two months ago or, available in a new stable release, 3.0.10 (current Mac Port version is 3.0.8) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 06:40:13 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 13:40:13 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.2671d88f732f1fbb64ea5340381fb2ed@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by agentyikes at paranormalcop.net): Still the same! When installed up to dbus-glib. It exited with status 1. Same output as posted above. Any help? -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 07:40:30 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 14:40:30 -0000 Subject: [MacPorts] #16826: MacPorts fails to build dependencies during port upgrade Message-ID: <057.4570b5aaf15df20253f424defbc9d8dc@macports.org> #16826: MacPorts fails to build dependencies during port upgrade -----------------------------------+---------------------------------------- Reporter: boxerfencer at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: -----------------------------------+---------------------------------------- During both sudo port upgrade installed and sudo port upgrade oudated I get failed attempts at building: gegl ffmpeg a52dec db46 cyrus-sasl2 graphviz libsdl lua openexr ilmbase And it seemingly loops endlessly. I also get a "Error: No port gail found." after the "sudo port upgrade oudated" command. When I tried "sudo port -d sync", failed attempts diminished as in the following. Error: The following dependencies failed to build: gegl ffmpeg a52dec Error: Unable to upgrade port: 1 Interestingly, "sudo port -d selfupdate" doesn't report any problems. Details port -v reports: MacPorts 1.600 And I'm running on a Mac Book Pro running the Yonah x86 processor. You'll see a complaint about illegal ccache usage, well I deleted ccache and set "configureccache" to "no" in /opt/local/etc/macports/macports.conf and reattempted to update/upgrade and still encountered the same problem. The initial error mentioned above (first) follows. ---> Building a52dec with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_a52dec/work/a52dec-0.7.4" && make all " returned error 2 Command output: Making all in autotools make[1]: Nothing to be done for `all'. Making all in include make[1]: Nothing to be done for `all'. Making all in doc make[1]: Nothing to be done for `all'. Making all in liba52 /bin/sh ../libtool --mode=link ccache /usr/bin/gcc-4.0 -O3 -fomit-frame- pointer -prefer-non-pic -L/opt/local/lib -o liba52.la -rpath /opt/local/lib -no-undefined bitstream.lo imdct.lo bit_allocate.lo parse.lo downmix.lo -lm rm -fr .libs/liba52.la .libs/liba52.* .libs/liba52.* ccache -dynamiclib -o .libs/liba52.0.0.0.dylib bitstream.lo imdct.lo bit_allocate.lo parse.lo downmix.lo -L/opt/local/lib -lm -lc -install_name /opt/local/lib/liba52.0.dylib -compatibility_version 1 -current_version 1.0 ccache: illegal option -- d ccache, a compiler cache. Version 2.4 Copyright Andrew Tridgell, 2002 Usage: ccache [options] ccache compiler [compile options] compiler [compile options] (via symbolic link) Options: -s show statistics summary -z zero statistics -c run a cache cleanup -C clear the cache completely -F set maximum files in cache -M set maximum size of cache (use G, M or K) -h this help page -V print version number make[1]: *** [liba52.la] Error 1 make: *** [all-recursive] Error 1 Error: The following dependencies failed to build: gegl ffmpeg a52dec db46 cyrus-sasl2 graphviz libsdl lua openexr ilmbase Error: Unable to upgrade port: 1 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 07:48:50 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 14:48:50 -0000 Subject: [MacPorts] #16737: gnucash 2.2.7 build faliure In-Reply-To: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> References: <052.10a6b6a40af12426109d33ee5cbd86da@macports.org> Message-ID: <061.47cc90307a247a9d0a9475a37b3c30d0@macports.org> #16737: gnucash 2.2.7 build faliure -------------------------------+-------------------------------------------- Reporter: benlight at mac.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: gnucash. Leopard Port: gnucash | -------------------------------+-------------------------------------------- Comment(by macsforever2000 at macports.org): As mentioned a few comments up, do the following: {{{ sudo port clean dbus-glib sudo port install gnucash }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 08:49:31 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 15:49:31 -0000 Subject: [MacPorts] #16827: Update for qgit 2.1 -> 2.2 and solution for git not in PATH Message-ID: <054.6d679afd45a74bd6467ff37b3de532b8@macports.org> #16827: Update for qgit 2.1 -> 2.2 and solution for git not in PATH --------------------------------+------------------------------------------- Reporter: ocroquette at free.fr | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | Port: --------------------------------+------------------------------------------- This is an update for qgit 2.2, and at the same time a solution for ticket #16800. The reusable part of the patch has been sent to the qgit project: http://sourceforge.net/tracker/index.php?func=detail&aid=2159508&group_id=139897&atid=744829 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 08:54:19 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 15:54:19 -0000 Subject: [MacPorts] #16800: qgit.app fails to find git executable In-Reply-To: <061.40bce31a7ca49bae8adfeda8e1b3e028@macports.org> References: <061.40bce31a7ca49bae8adfeda8e1b3e028@macports.org> Message-ID: <070.81c225baf002cda8ea68c4a3ca69a7a1@macports.org> #16800: qgit.app fails to find git executable ----------------------------------------+----------------------------------- Reporter: swinbank at transientskp.org | Owner: ocroquette at free.fr Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: qgit | ----------------------------------------+----------------------------------- Comment(by ocroquette at free.fr): Should be solved with ticket #16827 ("Update for qgit 2.1 -> 2.2 and solution for git not in PATH"). However, I don't know how to link the 2 tickets. When the new version is available, please confirm that the solution works for you, thanks ! Olivier -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 09:43:23 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 16:43:23 -0000 Subject: [MacPorts] #16670: arpwatch ... incomplete installation In-Reply-To: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> References: <060.c65e36b6e38a56aaecdea2f16b6e39d9@macports.org> Message-ID: <069.6cdc2e77aaf64026eeed81a1ef54c7c4@macports.org> #16670: arpwatch ... incomplete installation ---------------------------------------+------------------------------------ Reporter: mark at dxradio.demon.co.uk | Owner: pmq at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: arpwatch | ---------------------------------------+------------------------------------ Changes (by pmq at macports.org): * status: new => closed * resolution: => fixed Comment: OK closing. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 09:46:38 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 16:46:38 -0000 Subject: [MacPorts] #16816: Lua 5.1.4 update In-Reply-To: <062.a69e1e3ec25bcbffd8113b481933b63e@macports.org> References: <062.a69e1e3ec25bcbffd8113b481933b63e@macports.org> Message-ID: <071.2b952999cfc8fe93a440460752e5c569@macports.org> #16816: Lua 5.1.4 update -----------------------------------------+---------------------------------- Reporter: andrea.damore at macports.org | Owner: pmq Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: lua Port: lua | -----------------------------------------+---------------------------------- Changes (by pmq at macports.org): * status: new => closed * resolution: => fixed Comment: OK done. Thanks for the heads-up. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 09:53:29 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 16:53:29 -0000 Subject: [MacPorts] #16677: py25-libpcap, version of py-pylibpcap for Python 2.5 In-Reply-To: <053.ed4a981435925248918914461637cff7@macports.org> References: <053.ed4a981435925248918914461637cff7@macports.org> Message-ID: <062.72d79c855b0fde30ce7080ef5db9489d@macports.org> #16677: py25-libpcap, version of py-pylibpcap for Python 2.5 --------------------------------+------------------------------------------- Reporter: msavory at nzbox.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: pcap Port: | --------------------------------+------------------------------------------- Changes (by pmq at macports.org): * status: new => closed * resolution: => fixed Comment: Committed, thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 09:59:28 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 16:59:28 -0000 Subject: [MacPorts] #15871: py-pylibpcap-0.6.2 failing to build on Panther In-Reply-To: <055.e0761a9ade80893cd5a53b7115c611ee@macports.org> References: <055.e0761a9ade80893cd5a53b7115c611ee@macports.org> Message-ID: <064.0b0f9be7e5c828e55da1ba2a90f50994@macports.org> #15871: py-pylibpcap-0.6.2 failing to build on Panther ----------------------------------+----------------------------------------- Reporter: wustenfuchs at mac.com | Owner: pmq at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: invalid | Keywords: py-pylibpcap build failure Port: | ----------------------------------+----------------------------------------- Changes (by pmq at macports.org): * status: new => closed * resolution: => invalid Comment: Closing due to inactivity. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 10:00:11 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 17:00:11 -0000 Subject: [MacPorts] #16828: vte 0.16.14 build error Message-ID: <064.3166542a1fb08b3d886b1caaf9f14300@macports.org> #16828: vte 0.16.14 build error ------------------------------------------+--------------------------------- Reporter: macsforever2000 at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: vte ------------------------------------------+--------------------------------- vte is not building for me on Mac OS X 10.5.5 powerpc. {{{ ---> Building vte with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_mports_trunk_dports_gnome_vte/work/vte-0.16.14" && make all " returned error 2 Command output: vtebg.c:111: error: 'window' undeclared (first use in this function) vtebg.c:111: error: (Each undeclared identifier is reported only once vtebg.c:111: error: for each function it appears in.) vtebg.c:114: error: 'type' undeclared (first use in this function) vtebg.c:114: error: 'size' undeclared (first use in this function) vtebg.c:115: error: 'pixmaps' undeclared (first use in this function) vtebg.c: In function 'vte_bg_root_pixmap': vtebg.c:124: error: 'XID' undeclared (first use in this function) vtebg.c:124: error: 'pixmaps' undeclared (first use in this function) vtebg.c:129: error: dereferencing pointer to incomplete type vtebg.c:129: error: dereferencing pointer to incomplete type vtebg.c:135: error: dereferencing pointer to incomplete type vtebg.c: In function 'vte_bg_root_filter': vtebg.c:166: error: 'XEvent' undeclared (first use in this function) vtebg.c:166: error: 'xevent' undeclared (first use in this function) vtebg.c:166: error: syntax error before ')' token vtebg.c:171: error: 'PropertyNotify' undeclared (first use in this function) vtebg.c:173: error: dereferencing pointer to incomplete type vtebg.c:174: error: dereferencing pointer to incomplete type vtebg.c: In function 'vte_bg_cache_item_free': vtebg.c:346: warning: dereferencing type-punned pointer will break strict- aliasing rules vtebg.c:351: warning: dereferencing type-punned pointer will break strict- aliasing rules vtebg.c:355: warning: dereferencing type-punned pointer will break strict- aliasing rules vtebg.c: In function 'vte_bg_cache_add': vtebg.c:444: warning: dereferencing type-punned pointer will break strict- aliasing rules vtebg.c:448: warning: dereferencing type-punned pointer will break strict- aliasing rules vtebg.c:452: warning: dereferencing type-punned pointer will break strict- aliasing rules make[2]: *** [vtebg.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 10:56:55 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 17:56:55 -0000 Subject: [MacPorts] #16829: Add py25-virtualenvwrapper port Message-ID: <059.61b8318efe8df5952a2dd386c4d0ac24@macports.org> #16829: Add py25-virtualenvwrapper port ------------------------------------------+--------------------------------- Reporter: arthur at arthurkoziel.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: virtualenvwrapper virtualenv | Port: ------------------------------------------+--------------------------------- Port for virtualenvwrapper 1.1 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 11:49:19 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 18:49:19 -0000 Subject: [MacPorts] #16830: RFE: Have only one perl5 package Message-ID: <057.b9bfdd04b716d547c790e1f18d0180ab@macports.org> #16830: RFE: Have only one perl5 package -----------------------------------+---------------------------------------- Reporter: mcalhoun at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | Port: -----------------------------------+---------------------------------------- Is there a compelling reason why there are two packages for Perl 5?[[BR]] May I suggest that perl5.8 be removed and perl5.10 become perl5.[[BR]] * perl5.8 is unmaintained. * Perl 5.10 has been been the official Perl since December. * It would preclude the need for some sort of perl_select package. I am not an expert in Perl development, so perhaps there are good reasons for keeping perl5.8 around, but if not, then having just one perl5 package would be a relatively easy (and simplifying) change to make. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 11:59:54 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 18:59:54 -0000 Subject: [MacPorts] #16830: RFE: Have only one perl5 package In-Reply-To: <057.b9bfdd04b716d547c790e1f18d0180ab@macports.org> References: <057.b9bfdd04b716d547c790e1f18d0180ab@macports.org> Message-ID: <066.8a8488a41a364c5906032da98f56c686@macports.org> #16830: RFE: Have only one perl5 package ------------------------------------+--------------------------------------- Reporter: mcalhoun at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ------------------------------------+--------------------------------------- Comment(by dluke at macports.org): CPAN still lists 5.8.8 as recommended for stable production use, which would be a good reason to keep it around. I think defaulting to 5.10.0 and having it install ${prefix}/bin/perl and requiring anything that wants to have the older perl5.8 to use ${prefix}/bin/perl5.8 instead would be good, though. (and/or something like perl_select). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 12:17:05 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 19:17:05 -0000 Subject: [MacPorts] #16262: netcdf update 3.6.2 -> 4.0 In-Reply-To: <054.b859a9ee38cce8cfb72961cbed84f518@macports.org> References: <054.b859a9ee38cce8cfb72961cbed84f518@macports.org> Message-ID: <063.162ef0742187197338f4291e0b175cd5@macports.org> #16262: netcdf update 3.6.2 -> 4.0 ---------------------------------+------------------------------------------ Reporter: mmoll at macports.org | Owner: macsforever2000 at macports.org Type: enhancement | Status: closed Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: Port: netcdf | ---------------------------------+------------------------------------------ Comment(by mmoll at macports.org): My Portfile patch assumed that hdf5 would also be upgraded to the latest version. I submitted a Portfile patch for hdf5 as well, but the patch has been rejected by the maintainer: http://trac.macports.org/ticket/16263. Athough hdf5 has no dependencies in macports, the api is apparently not compatible between 1.6 (the Macports version) and 1.8 (the latest release). -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 12:33:05 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 19:33:05 -0000 Subject: [MacPorts] #16830: RFE: Have only one perl5 package In-Reply-To: <057.b9bfdd04b716d547c790e1f18d0180ab@macports.org> References: <057.b9bfdd04b716d547c790e1f18d0180ab@macports.org> Message-ID: <066.b499c996c758967b5c95977e4116d2ab@macports.org> #16830: RFE: Have only one perl5 package ------------------------------------+--------------------------------------- Reporter: mcalhoun at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ------------------------------------+--------------------------------------- Comment(by afb at macports.org): Asked this on the mailing list earlier, but there were no real decisions made: http://lists.macosforge.org/pipermail/macports- dev/2007-December/003911.html So it was easiest to just leave it, as Perl had bigger issues with the modules. But deleting /opt/local/bin/perl and adding a perl_select isn't too complicated. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 13:17:31 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 20:17:31 -0000 Subject: [MacPorts] #16826: MacPorts fails to build dependencies during port upgrade In-Reply-To: <057.4570b5aaf15df20253f424defbc9d8dc@macports.org> References: <057.4570b5aaf15df20253f424defbc9d8dc@macports.org> Message-ID: <066.83d72eecff9e094adb4b0f102fcc7627@macports.org> #16826: MacPorts fails to build dependencies during port upgrade ------------------------------------+--------------------------------------- Reporter: boxerfencer at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ------------------------------------+--------------------------------------- Old description: > During both > sudo port upgrade installed > and > sudo port upgrade oudated > I get failed attempts at building: > gegl ffmpeg a52dec db46 cyrus-sasl2 graphviz libsdl lua openexr ilmbase > > And it seemingly loops endlessly. > > I also get a "Error: No port gail found." after the "sudo port upgrade > oudated" command. > > When I tried "sudo port -d sync", failed attempts diminished as in the > following. > Error: The following dependencies failed to build: gegl ffmpeg a52dec > Error: Unable to upgrade port: 1 > > Interestingly, "sudo port -d selfupdate" doesn't report any problems. > > Details > port -v reports: > MacPorts 1.600 > > And I'm running on a Mac Book Pro running the Yonah x86 processor. > > You'll see a complaint about illegal ccache usage, well I deleted ccache > and set > "configureccache" to "no" in /opt/local/etc/macports/macports.conf and > reattempted to update/upgrade and still encountered the same problem. > > The initial error mentioned above (first) follows. > ---> Building a52dec with target all > Error: Target org.macports.build returned: shell command " cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_a52dec/work/a52dec-0.7.4" > && make all " returned error 2 > Command output: Making all in autotools > make[1]: Nothing to be done for `all'. > Making all in include > make[1]: Nothing to be done for `all'. > Making all in doc > make[1]: Nothing to be done for `all'. > Making all in liba52 > /bin/sh ../libtool --mode=link ccache /usr/bin/gcc-4.0 -O3 -fomit-frame- > pointer -prefer-non-pic -L/opt/local/lib -o liba52.la -rpath > /opt/local/lib -no-undefined bitstream.lo imdct.lo bit_allocate.lo > parse.lo downmix.lo -lm > rm -fr .libs/liba52.la .libs/liba52.* .libs/liba52.* > ccache -dynamiclib -o .libs/liba52.0.0.0.dylib bitstream.lo imdct.lo > bit_allocate.lo parse.lo downmix.lo -L/opt/local/lib -lm -lc > -install_name /opt/local/lib/liba52.0.dylib -compatibility_version 1 > -current_version 1.0 > ccache: illegal option -- d > ccache, a compiler cache. Version 2.4 > Copyright Andrew Tridgell, 2002 > > Usage: > ccache [options] > ccache compiler [compile options] > compiler [compile options] (via symbolic link) > > Options: > -s show statistics summary > -z zero statistics > -c run a cache cleanup > -C clear the cache completely > -F set maximum files in cache > -M set maximum size of cache (use G, M or K) > -h this help page > -V print version number > make[1]: *** [liba52.la] Error 1 > make: *** [all-recursive] Error 1 > > Error: The following dependencies failed to build: gegl ffmpeg a52dec > db46 cyrus-sasl2 graphviz libsdl lua openexr ilmbase > Error: Unable to upgrade port: 1 New description: During both sudo port upgrade installed and sudo port upgrade oudated I get failed attempts at building: gegl ffmpeg a52dec db46 cyrus-sasl2 graphviz libsdl lua openexr ilmbase And it seemingly loops endlessly. I also get a "Error: No port gail found." after the "sudo port upgrade oudated" command. When I tried "sudo port -d sync", failed attempts diminished as in the following. {{{ Error: The following dependencies failed to build: gegl ffmpeg a52dec Error: Unable to upgrade port: 1 }}} Interestingly, "sudo port -d selfupdate" doesn't report any problems. Details port -v reports: MacPorts 1.600 And I'm running on a Mac Book Pro running the Yonah x86 processor. You'll see a complaint about illegal ccache usage, well I deleted ccache and set "configureccache" to "no" in /opt/local/etc/macports/macports.conf and reattempted to update/upgrade and still encountered the same problem. The initial error mentioned above (first) follows. {{{ ---> Building a52dec with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_a52dec/work/a52dec-0.7.4" && make all " returned error 2 Command output: Making all in autotools make[1]: Nothing to be done for `all'. Making all in include make[1]: Nothing to be done for `all'. Making all in doc make[1]: Nothing to be done for `all'. Making all in liba52 /bin/sh ../libtool --mode=link ccache /usr/bin/gcc-4.0 -O3 -fomit-frame- pointer -prefer-non-pic -L/opt/local/lib -o liba52.la -rpath /opt/local/lib -no-undefined bitstream.lo imdct.lo bit_allocate.lo parse.lo downmix.lo -lm rm -fr .libs/liba52.la .libs/liba52.* .libs/liba52.* ccache -dynamiclib -o .libs/liba52.0.0.0.dylib bitstream.lo imdct.lo bit_allocate.lo parse.lo downmix.lo -L/opt/local/lib -lm -lc -install_name /opt/local/lib/liba52.0.dylib -compatibility_version 1 -current_version 1.0 ccache: illegal option -- d ccache, a compiler cache. Version 2.4 Copyright Andrew Tridgell, 2002 Usage: ccache [options] ccache compiler [compile options] compiler [compile options] (via symbolic link) Options: -s show statistics summary -z zero statistics -c run a cache cleanup -C clear the cache completely -F set maximum files in cache -M set maximum size of cache (use G, M or K) -h this help page -V print version number make[1]: *** [liba52.la] Error 1 make: *** [all-recursive] Error 1 Error: The following dependencies failed to build: gegl ffmpeg a52dec db46 cyrus-sasl2 graphviz libsdl lua openexr ilmbase Error: Unable to upgrade port: 1 }}} -- Comment(by blb at macports.org): After changing a setting in macports.conf and rebuilding, you'll need to clean what failed, in this case a52dec: {{{sudo port clean --work a52dec}}}. Then try again. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 15:33:11 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 22:33:11 -0000 Subject: [MacPorts] #16794: wxMaxima 0.7.5 not supported on the architecture In-Reply-To: <057.7d850f21c2f8d20dcc22f399122adb72@macports.org> References: <057.7d850f21c2f8d20dcc22f399122adb72@macports.org> Message-ID: <066.06c7127235d1435fd5ec796609054f4f@macports.org> #16794: wxMaxima 0.7.5 not supported on the architecture ------------------------------------+--------------------------------------- Reporter: carlon.luca at gmail.com | Owner: usami-k at yc5.so-net.ne.jp Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: wxMaxima | ------------------------------------+--------------------------------------- Comment(by usami-k at yc5.so-net.ne.jp): On my environment, wxMaxima 0.7.5 works fine. * Case 1 : Mac OS X 10.4.11, PowerPC, Xcode 2.5 * Case 2 : Mac OS X 10.5.5, Intel, Xcode 3.1.1 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 15:45:10 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 22:45:10 -0000 Subject: [MacPorts] #16826: MacPorts fails to build dependencies during port upgrade In-Reply-To: <057.4570b5aaf15df20253f424defbc9d8dc@macports.org> References: <057.4570b5aaf15df20253f424defbc9d8dc@macports.org> Message-ID: <066.51e7230557eb83652efe661650e93e67@macports.org> #16826: MacPorts fails to build dependencies during port upgrade ------------------------------------+--------------------------------------- Reporter: boxerfencer at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ------------------------------------+--------------------------------------- Comment(by boxerfencer at gmail.com): Replying to [comment:1 blb@?]: > After changing a setting in macports.conf and rebuilding, you'll need to clean what failed, in this case a52dec: {{{sudo port clean --work a52dec}}}. Then try again. I did all of the following to the same result. sudo port clean --work openexr sudo port clean --work lua sudo port clean --work libsdl sudo port clean --work ilmbase Chascon -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 16:09:05 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 23:09:05 -0000 Subject: [MacPorts] #16813: gimp-app failed to install In-Reply-To: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> References: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> Message-ID: <063.96037fedcfde9ef6888c957c83f7c616@macports.org> #16813: gimp-app failed to install ---------------------------------+------------------------------------------ Reporter: asbjorn at ulsberg.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: install error Port: | ---------------------------------+------------------------------------------ Comment(by asbjorn at ulsberg.no): Yep, that did it. Gimp.app is now installed, although it requires X11 to be started before executing -- but I guess that's fair enough and has nothing to do with MacPorts either way. Thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 16:30:59 2008 From: noreply at macports.org (MacPorts) Date: Sat, 11 Oct 2008 23:30:59 -0000 Subject: [MacPorts] #16831: octave gcc43 variant installs g95 Message-ID: <054.f34fff7ed3a6a734b18881c74d465281@macports.org> #16831: octave gcc43 variant installs g95 ---------------------------------------+------------------------------------ Reporter: bcbarnes at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: octave gcc43 g95 gfortran | Port: octave ---------------------------------------+------------------------------------ 10.5.5 (intel MBP), Macports 1.600, recently selfupdate'd. When installing octave, even with the +gcc43 variant, the g95 package is still installed. gcc43 provides gfortran by default, and gfortran should be used to compile any fortran files required for octave or its dependencies (yes? if not, why...?). g95 ends up eating disk space needlessly, and if uninstalled and then octave is upgraded, g95 attempts to reinstall itself. solution: make octave and/or its dependencies build with the full F95 compliant gfortran compiler. thanks! -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 17:02:32 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 00:02:32 -0000 Subject: [MacPorts] #16832: postgresql83[-server, -doc] Unable to verify file checksums Message-ID: <056.3bd805f7dd56b7db17cce5cc4f3f2a6e@macports.org> #16832: postgresql83[-server, -doc] Unable to verify file checksums ----------------------------------+----------------------------------------- Reporter: ben at benspaulding.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: postgresql83, postgresql83-server, postgresql83-doc,, ----------------------------------+----------------------------------------- All postgresql83* ports fail with the following: {{{ ? ---> Verifying checksum(s) for postgresql83 Error: Checksum (md5) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (sha1) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (rmd160) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (md5) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (sha1) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (rmd160) mismatch for postgresql-8.3.4.tar.bz2 Error: Target org.macports.checksum returned: Unable to verify file checksums Error: The following dependencies failed to build: postgresql83 Error: Status 1 encountered during processing. }}} I have done a {{{sudo port sync}}} and {{{sudo port clean --all }}} followed by a {{{port install }}} to try and resolve the issue, but with no success. I assume this has something to do with the recent release of [http://www.postgresql.org/docs/8.3/static/release-8-3-4.html PostgreSQL 8.3.4]. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 17:20:24 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 00:20:24 -0000 Subject: [MacPorts] #16832: postgresql83[-server, -doc] Unable to verify file checksums In-Reply-To: <056.3bd805f7dd56b7db17cce5cc4f3f2a6e@macports.org> References: <056.3bd805f7dd56b7db17cce5cc4f3f2a6e@macports.org> Message-ID: <065.6bf7ee1283a66844f1e1ee43d093d4b8@macports.org> #16832: postgresql83[-server, -doc] Unable to verify file checksums --------------------------------------------------------------------+------- Reporter: ben at benspaulding.com | Owner: mww at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: postgresql83, postgresql83-server, postgresql83-doc,, | --------------------------------------------------------------------+------- Changes (by blb at macports.org): * cc: mww, jwa (removed) * cc: jwa at macports.org (added) * owner: macports-tickets at lists.macosforge.org => mww at macports.org Comment: From which server did it download? I just grabbed it from ftp3.de.postgresql.org and the checksum was okay. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 17:59:07 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 00:59:07 -0000 Subject: [MacPorts] #16833: dbus autolaunch fails because of '/' characters in $DISPLAY Message-ID: <051.32ad6cf58ffbe238f607f2adccc6802d@macports.org> #16833: dbus autolaunch fails because of '/' characters in $DISPLAY -----------------------------+---------------------------------------------- Reporter: mp at dpj.sent.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: dbus -----------------------------+---------------------------------------------- dbus autolaunch fails on OS X 10.5 Leopard because the DISPLAY environment variable contains '/' characters. (It may also fail on 10.4 but I haven't tested it.) dbus-launch uses the DISPLAY env var to form the filename for the session file, and then opens/creates that file with a call to fopen(). But because the filename now contains '/' characters, fopen() fails as it tries to create directories. I've made a patch for dbus-launch-x11.c which changes all '/' characters to '_' characters in the filename. This patch should be safe for 10.4 as well. I've also made a Portfile patch. I've filed the bug and patch upstream at https://bugs.freedesktop.org/show_bug.cgi?id=18013 but thought that we should include it in macports until it gets applied upstream. This bug is related to one of the problems with gnucash that is being reported in bug #16755 -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 18:37:39 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 01:37:39 -0000 Subject: [MacPorts] #16831: octave gcc43 variant installs g95 In-Reply-To: <054.f34fff7ed3a6a734b18881c74d465281@macports.org> References: <054.f34fff7ed3a6a734b18881c74d465281@macports.org> Message-ID: <063.6d08642dfe2255bfbdb5b86f943aed2b@macports.org> #16831: octave gcc43 variant installs g95 ---------------------------------+------------------------------------------ Reporter: bcbarnes at gmail.com | Owner: stechert at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: octave gcc43 g95 gfortran Port: octave | ---------------------------------+------------------------------------------ Changes (by jmr at macports.org): * cc: alakazam at melix.net (added) * owner: macports-tickets at lists.macosforge.org => stechert at macports.org -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 18:40:47 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 01:40:47 -0000 Subject: [MacPorts] #16813: gimp-app failed to install In-Reply-To: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> References: <054.b7a7761f0d676f2d5e66eeb49b95146d@macports.org> Message-ID: <063.079e8ad73e235b882b26d67d13cf2172@macports.org> #16813: gimp-app failed to install ---------------------------------+------------------------------------------ Reporter: asbjorn at ulsberg.no | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: install error Port: | ---------------------------------+------------------------------------------ Changes (by macsforever2000 at macports.org): * status: new => closed * resolution: => worksforme -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 19:43:35 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 02:43:35 -0000 Subject: [MacPorts] #15730: i386-mingw32-binutils 2.16.91-20060119-1 build error In-Reply-To: <056.3fc3c8e95a3f8fc82db940c7b4c65f10@macports.org> References: <056.3fc3c8e95a3f8fc82db940c7b4c65f10@macports.org> Message-ID: <065.ddfc85e4453658d61dfe7e7b2d77b547@macports.org> #15730: i386-mingw32-binutils 2.16.91-20060119-1 build error -----------------------------------+---------------------------------------- Reporter: vaillant at cis.jhu.edu | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: | Keywords: i386-mingw32-binutils -----------------------------------+---------------------------------------- Comment(by jeremy at hinegardner.org): This is a bug with the configure script in binutils. It is an older version and doesn't handle 4.XX versions of texinfo. The attached patch to the i386-mingw32-binutils port tree should fix it. At least it did for me. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 19:51:31 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 02:51:31 -0000 Subject: [MacPorts] #15730: i386-mingw32-binutils 2.16.91-20060119-1 build error In-Reply-To: <056.3fc3c8e95a3f8fc82db940c7b4c65f10@macports.org> References: <056.3fc3c8e95a3f8fc82db940c7b4c65f10@macports.org> Message-ID: <065.e898e74a05eb00c7d36aee6ee765182d@macports.org> #15730: i386-mingw32-binutils 2.16.91-20060119-1 build error ------------------------------------+--------------------------------------- Reporter: vaillant at cis.jhu.edu | Owner: landonf at macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: i386-mingw32-binutils | ------------------------------------+--------------------------------------- Changes (by macsforever2000 at macports.org): * cc: landonf at macports.org (removed) * keywords: i386-mingw32-binutils => * port: => i386-mingw32-binutils * owner: macports-tickets at lists.macosforge.org => landonf at macports.org * milestone: => Port Bugs -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 19:54:18 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 02:54:18 -0000 Subject: [MacPorts] #16329: Inheritance of macports.conf configuration files In-Reply-To: <056.e07e9845d3bc3bcd9aba1f246d618441@macports.org> References: <056.e07e9845d3bc3bcd9aba1f246d618441@macports.org> Message-ID: <065.2deaebfb9d0434a57245f3468a96fddb@macports.org> #16329: Inheritance of macports.conf configuration files -----------------------------------+---------------------------------------- Reporter: adambyrtek at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: closed Priority: Normal | Milestone: MacPorts base enhancements Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: configuration patch Port: | -----------------------------------+---------------------------------------- Changes (by raimue at macports.org): * status: new => closed * resolution: => fixed Comment: Committed in r40712. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sat Oct 11 22:48:55 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 05:48:55 -0000 Subject: [MacPorts] #16834: iso-codes 3.2 Error: Target org.macports.destroot...returned error 2 Message-ID: <056.af6da17127ea7e321348f8993e8a25dc@macports.org> #16834: iso-codes 3.2 Error: Target org.macports.destroot...returned error 2 ------------------------------------+--------------------------------------- Reporter: philbrisco at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: iso-codes Error 71 2 1 | Port: iso-codes ------------------------------------+--------------------------------------- iso-codes 3.2 fails to compile due to recursion errors. The following are the relevant error messages: Error: Target org.macports.destroot returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_devel_iso-codes/work/iso-codes-3.2" && make install DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_devel_iso-codes/work/destroot " returned error 2 make[3]: *** [install-data-hook] Error 71 make[2]: *** [install-data-am] Error 2 make[1]: *** [install-am] Error 2 make: *** [install-recursive] Error 1 Error: Status 1 encountered during processing. PhillipBrisco:build phillipbrisco$ port info iso-codes iso-codes 3.2, devel/iso-codes http://pkg-isocodes.alioth.debian.org/ -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 01:59:03 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 08:59:03 -0000 Subject: [MacPorts] #16830: RFE: Have only one perl5 package In-Reply-To: <057.b9bfdd04b716d547c790e1f18d0180ab@macports.org> References: <057.b9bfdd04b716d547c790e1f18d0180ab@macports.org> Message-ID: <066.37f2e609aafe4ad7774daf5ded03f5b0@macports.org> #16830: RFE: Have only one perl5 package ------------------------------------+--------------------------------------- Reporter: mcalhoun at macports.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ------------------------------------+--------------------------------------- Comment(by afb at macports.org): > Is there a compelling reason why there are two packages for Perl 5?[[BR]] > May I suggest that perl5.8 be removed and perl5.10 become perl5.[[BR]] > * perl5.8 is unmaintained. > * Perl 5.10 has been been the official Perl since December. As originally proposed, this suggesstion is a non-starter... It would be rather unusual for one port to disappear and to change the name of the "perl5.10" port (odd as it is). However, changing the "default perl" to Perl 5.10 is certainly doable even if annoying due to all "port:perl5.8" The other misunderstanding is that perl5.10 is maintained, I'll clear that up. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 02:18:19 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 09:18:19 -0000 Subject: [MacPorts] #16820: webkit-gtk RPM build error In-Reply-To: <058.fecf6e60553d736a8e18cb0e24eb1239@macports.org> References: <058.fecf6e60553d736a8e18cb0e24eb1239@macports.org> Message-ID: <067.d2d9a77cc0c4cdb2f535d91fbd2cc04f@macports.org> #16820: webkit-gtk RPM build error -------------------------------------+-------------------------------------- Reporter: probono at puredarwin.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: webkit-gtk, rpm Port: webkit-gtk | -------------------------------------+-------------------------------------- Comment(by afb at macports.org): Hmm, that %install phase is supposed to be a no-op (empty). Can you try again with {{{rpm @4.4.9_6}}}, please ? {{{ %prep %build %install %clean }}} -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 02:22:53 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 09:22:53 -0000 Subject: [MacPorts] #16788: BUG: Error: Unable to open port: invalid command name "use_lzma" In-Reply-To: <055.5b0e2625473567146ee5098c094823b0@macports.org> References: <055.5b0e2625473567146ee5098c094823b0@macports.org> Message-ID: <064.e6d58e18be6b61004bbbb1895e4a1e49@macports.org> #16788: BUG: Error: Unable to open port: invalid command name "use_lzma" ----------------------------------+----------------------------------------- Reporter: milosh at macports.org | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: base | Version: 1.7.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by afb at macports.org): Replying to [comment:2 milosh@?]: > Yes, that's what I did. However, I'm surprised that a feature that is present in trunk fails to be understood in trunk. trunk/dports doesn't use trunk/base, it uses branches/release_1_6/base. Too many trunks around, I suppose. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 02:53:35 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 09:53:35 -0000 Subject: [MacPorts] #16772: gnome-desktop 2.24.0 build failure In-Reply-To: <055.3d7b3d9b9e942cba347c16095a507431@macports.org> References: <055.3d7b3d9b9e942cba347c16095a507431@macports.org> Message-ID: <064.303bbba5215894b7b71937760c2f4076@macports.org> #16772: gnome-desktop 2.24.0 build failure ----------------------------------+----------------------------------------- Reporter: d.fabisch at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | ----------------------------------+----------------------------------------- Comment(by d.fabisch at gmail.com): Installing version [http://xquartz.macosforge.org/trac/wiki/X112.3.1] on my MB running OSX 10.5.5 as suggested in #16720 fixed the issue -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 03:07:01 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 10:07:01 -0000 Subject: [MacPorts] #16835: py25-m2crypto-0.19 New port Message-ID: <054.92b0dee1b3e26463111ecab08f2076c4@macports.org> #16835: py25-m2crypto-0.19 New port --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | Port: py25-m2crypto --------------------------------+------------------------------------------- M2Crypto for python2.5 This is a slightly modified version of py-m2crypto-0.17 package. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 03:12:23 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 10:12:23 -0000 Subject: [MacPorts] #16820: webkit-gtk RPM build error In-Reply-To: <058.fecf6e60553d736a8e18cb0e24eb1239@macports.org> References: <058.fecf6e60553d736a8e18cb0e24eb1239@macports.org> Message-ID: <067.e51666336d7f58dd04aabadbd9ae26cb@macports.org> #16820: webkit-gtk RPM build error -------------------------------------+-------------------------------------- Reporter: probono at puredarwin.org | Owner: afb at macports.org Type: defect | Status: assigned Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: webkit-gtk, rpm Port: webkit-gtk | -------------------------------------+-------------------------------------- Changes (by afb at macports.org): * owner: macports-tickets at lists.macosforge.org => afb at macports.org * status: new => assigned Comment: Ack, this is a bug in 4.4.9 that is fixed in 5.0.0 already. Backporting a fix... -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 03:32:17 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 10:32:17 -0000 Subject: [MacPorts] #16820: webkit-gtk RPM build error In-Reply-To: <058.fecf6e60553d736a8e18cb0e24eb1239@macports.org> References: <058.fecf6e60553d736a8e18cb0e24eb1239@macports.org> Message-ID: <067.4e02638067fecd750144bb810f617a65@macports.org> #16820: webkit-gtk RPM build error -------------------------------------+-------------------------------------- Reporter: probono at puredarwin.org | Owner: afb at macports.org Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: fixed | Keywords: webkit-gtk, rpm Port: webkit-gtk | -------------------------------------+-------------------------------------- Changes (by afb at macports.org): * status: assigned => closed * resolution: => fixed Comment: Fixed, r40719. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 03:41:40 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 10:41:40 -0000 Subject: [MacPorts] #16836: py25-pygraphviz-0.37 New port Message-ID: <054.6b2a44b9eb507e12105c83a838545804@macports.org> #16836: py25-pygraphviz-0.37 New port --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | Port: py25-pygraphviz --------------------------------+------------------------------------------- New python2.5 port for https://networkx.lanl.gov/wiki/pygraphviz package (GraphViz's Agraph bindings) -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 03:44:08 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 10:44:08 -0000 Subject: [MacPorts] #16837: py25-networkx-0.37 New port Message-ID: <054.7b0283449d8fc0b3448b62180933f91b@macports.org> #16837: py25-networkx-0.37 New port --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | Port: py25-networkx --------------------------------+------------------------------------------- python2.5 port for http://networkx.lanl.gov/ graph package -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 05:55:06 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 12:55:06 -0000 Subject: [MacPorts] #16838: py25-hcluster-0.1.9 New port Message-ID: <054.2949cc93989658901e9d3c6b95990bbd@macports.org> #16838: py25-hcluster-0.1.9 New port --------------------------------+------------------------------------------- Reporter: stromnov at gmail.com | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | Port: py25-hcluster --------------------------------+------------------------------------------- Python library for agglomerative clustering (http://code.google.com/p /scipy-cluster/). Depends only on py25-numpy, not scipy. -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 06:08:47 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 13:08:47 -0000 Subject: [MacPorts] #16839: freetype-2.3.7 puredarwin variant Message-ID: <058.37a94c98530df8f160e4b59a53d3117b@macports.org> #16839: freetype-2.3.7 puredarwin variant --------------------------------------------+------------------------------- Reporter: probono at puredarwin.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: freetype, puredarwin, haspatch | Port: freetype --------------------------------------------+------------------------------- Patch to include a +puredarwin variant so that the resulting binary can run on [http://www.puredarwin.org/ PureDarwin], where proprietary frameworks and libraries are not available -- Ticket URL: MacPorts Ports system for Mac OS From noreply at macports.org Sun Oct 12 06:55:18 2008 From: noreply at macports.org (MacPorts) Date: Sun, 12 Oct 2008 13:55:18 -0000 Subject: [MacPorts] #16840: cairo 1.8.0 puredarwin variant Message-ID: <057.3e6e2c7a9d6c8fc0b9a6b739bb64f69f@macports.org> #16840: cairo 1.8.0 puredarwin variant -----------------------------------------+---------------------------------- Reporter: aladin at puredarwin.org | Owner: macports-tickets at lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: cairo, puredarwin, haspatch | Port: cairo -----------------------------------------+---------------------------------- Patch to include a +puredarwin variant so that the resulting binary can run on [http://www.puredarwin.org / PureDarwin], where proprietary