- darwinbuild-dev - lists.macosforge.org

xcodebuild errors out because it cannot find a valid Xcode project
by Ryan Spaulding 17 May '08

17 May '08

Hi List, I am getting an xcodebuild error when darwinbuild is trying to build IOKitUser because it cannot find the xcode project file. When am not chrooted I can run xcodebuild and it runs fine. I also chrooted by hand and tried and got the same error. Any ideas, I am new to darwinbuild. Thank you, Ryan

2 6

Initial work for Xcode 3 Compatibility
by William Siegrist 24 Apr '08

24 Apr '08

I just committed my work on getting installXcodebuild to work for Xcode v3.0. It doesnt work yet, but its close. We're still having a problem where xcodebuild cannot detect the project under the SourceCache directory when it tries to build. I've done some dtracing and do not see any failed file accesses, however, there are a lot of volfs queries when run without the chroot, but why those volfs queries arent even attempted from inside the chroot is still a mystery. I'm hoping that someone with more dtrace, volfs, or kernel experience can look over the problem and contribute or at least offer some suggestions. It might be that the kernel's volfs implementation has more security in it to detect chroot violations now. It might also be a problem with reading the filesystem attributes, but my dtracing didnt seem to back that up. Hope this helps move us forward on this issue. -Bill ---- William Siegrist Mac OS Forge http://macosforge.org/

1 0

First-time darwinbuild user---xcode problems
by Chris Cleeland 09 Apr '08

09 Apr '08

Hi, I'm a first-time darwinbuild user, having come to it because I would like to get OpenDirectory/DirectoryService built and working on one of my older Leopard machines. I originally started that endeavor by trying to build all the tools in the host OS, but ran into situations where compilation required some private headers (e.g., CFRuntime.h), and recommendations for resolution pointed to darwinbuild. I grabbed 0.7.2 and commenced to "darwinbuild DirectoryService", and had failures during setup running the installXcodebuild; some of it appears to have worked, while other parts didn't (or at least I got error messages from cpio and find). In perusing the archives from this list, I discovered some messages in January indicating that installXcodebuild is for darwin 8/tiger, and hasn't been updated for leopard yet, but it also sounds like a few folks have working build setups on leopard. For those of you who have working installs, do you have any idea what you did? I presume that installXcodebuild is supposed to mirror some Xcode stuff into the build root; can anybody provide an explanation of what stuff needs to get mirrored in? Finally, I also noticed in the archives a post indicating that Xcode sources had been posted. Is the need for installXcodebuild going to go away now that those are available, and we're just waiting for some updated darwinbuild to use those sources? Thanks, and sorry if I'm asking obvious questions, -cj

1 0

NXConstStr.h Not included in gcc builds 8A428
by Michael Franz 05 Apr '08

05 Apr '08

Hi, I was trying to compile gnustep-base on an installation of Darwin 8 (I now this is really old) but the configure script dies since NXConstStr.h is missing. I know that this file is in the source of gcc, so I built gcc using Darwinbuild. Since darwinbuild is reproducing the installation 'root' is also does not include NXConstStr.h. Is there a way to have darwinbuild include the additional files? I also tried objc4, but is is very small and does not include many files. I guess, my real question is, how do I get gnustep installed on darwin 8? Michael

1 0

Problems building OpenLDAP
by Norbert Rittel 01 Apr '08

01 Apr '08

I'm trying to fix a bug in OpenLDAP in 10.5.2 that I reported it to the OpenLDAP guys and they came up with a fix within one day: <http://www.OpenLDAP.org/its/index.cgi?findid=5402> But now I'm struggling to get this simple diff into Mac OS X (Server) as I'm even unable to compile the unaltered source. I've set up darwinbuild as instructed and have successfully build xnu and OpenSSL as two samples. But when I try # darwinbuild OpenLDAP I end up with an error pretty early in the process. config.log contains this line: ld: library not found for -lpac collect2: ld returned 1 exit status among other errors. I searched the Web for finding any pointer to libpac.dylib but there is none. Perhaps someone much more into OS development can help me with this issue. I'm already followed up to my initial bug report on AppleSeed but engineering hasn't come back to me, yet. Getting this fix in should be high priority for Apple as well because currently Set clauses in OpenLDAP fail on all Apple-supplied attributes because they all contain a hyphen ("apple-example"). - Norbert norbert(a)rittel.de · +49 171 4104321 Rittel Consulting · Emser Str. 150 · 56076 Koblenz · Germany

1 0

Manual setup on Leopard
by Ryan Chapman 01 Apr '08

01 Apr '08

Hi, I¹m trying to get darwinbuild to work with 10.5.2 manually (copying the dependencies manually). I¹m wondering if someone can offer some help as to figure out what file is missing and causing this: I created a dtrace script which I thought would show me what open file system call was failing: dtrace -n 'syscall::open*:entry { printf("%s %s => %d", execname, copyinstr(arg0), arg1); } The output from that shows no failed open calls. I¹m fairly certain the problem is a file somewhere which defines the platform specifications. Since I have a version of Xcode > 3 (which can¹t be named), I went ahead and copied all the platforms in /Developer/Platforms/ to BuildRoot/Developer/Platforms but no luck. Suggestions? root@RyanMac/# /Developer/usr/bin/xcodebuild 2008-04-01 01:58:10.943 xcodebuild[32690:10b] [MT] ASSERTION FAILURE in /SourceCache/DevToolsBase/DevToolsBase-1036/pbxcore/SpecificationTypes/XCPla tformSpecification.m:386 Details: The Mac OS X platform is missing - cannot set a default platform. Object: <XCPlatformSpecification> Method: +loadAllPlatforms Thread: <NSThread: 0x3e06a00>{name = (null), num = 1} Backtrace: 0 0x00bdffc7 -[XCAssertionHandler handleFailureInMethod:object:fileName:lineNumber:messageFormat:arguments:] (in DevToolsCore) 1 0x00bdfd3c _XCAssertionFailureHandler (in DevToolsCore) 2 0x00bd0470 +[XCPlatformSpecification loadAllPlatforms] (in DevToolsCore) 3 0x00bbbc0c XCInitializeCoreIfNeeded (in DevToolsCore) 4 0x0000a7e8 5 0x000027aa ** INTERNAL ERROR: Uncaught Exception ** Exception: ASSERTION FAILURE in /SourceCache/DevToolsBase/DevToolsBase-1036/pbxcore/SpecificationTypes/XCPla tformSpecification.m:386 Details: The Mac OS X platform is missing - cannot set a default platform. Object: <XCPlatformSpecification> Method: +loadAllPlatforms Thread: <NSThread: 0x3e06a00>{name = (null), num = 1} Backtrace: 0 0x00bdffc7 -[XCAssertionHandler handleFailureInMethod:object:fileName:lineNumber:messageFormat:arguments:] (in DevToolsCore) 1 0x00bdfd3c _XCAssertionFailureHandler (in DevToolsCore) 2 0x00bd0470 +[XCPlatformSpecification loadAllPlatforms] (in DevToolsCore) 3 0x00bbbc0c XCInitializeCoreIfNeeded (in DevToolsCore) 4 0x0000a7e8 5 0x000027aa Stack: 0 0x0089a24b __raiseError (in CoreFoundation) 1 0x011270fb objc_exception_throw (in libobjc.A.dylib) 2 0x00899d71 -[NSException raise] (in CoreFoundation) 3 0x00bdfd3c _XCAssertionFailureHandler (in DevToolsCore) 4 0x00bd0470 +[XCPlatformSpecification loadAllPlatforms] (in DevToolsCore) 5 0x00bbbc0c XCInitializeCoreIfNeeded (in DevToolsCore) 6 0x0000a7e8 7 0x000027aa Abort trap root@RyanMac/#

1 0

XCode Sources Posted
by William Siegrist 22 Mar '08

22 Mar '08

Sources for XCode 2.4.1, 2.5, and 3.1 have been posted to the darwinbuild server: http://src.macosforge.org/Projects/ -Bill ---- William Siegrist Software Support Engineer Mac OS Forge http://macosforge.org/ wsiegrist(a)apple.com 408 862 7337

1 0

building Libsystem
by Dave MacLachlan 17 Mar '08

17 Mar '08

Hey all, So as you can probably see from the darwinbuild tickets, I spend the weekend trying to build Libsystem with no success (although I think I got very close). Do you guys want bugs logged like this? All I'm really trying to do is get a debug build of libsystem so I can look at an issue in our own software that appears to be a stack stomp when using pthreads. It only appears when I run against the _debug frameworks supplied by DTS, so I'm not sure if it's an issue with the debug libsystem, or if using the debug libsystem is allowing me to see an issue in my own code. Any pointers on getting a libsystem building would be great. I got to the point where it was linking, but missing liblaunch. liblaunch appears to be part of launchd, but I currently can't build launchd due to it missing two headers: quarantine.h bootfiles.h. I was able to figure out the constants needed to avoid needing bootfiles.h, but can't get around not having quarantine.h Hopefully my enhancements to ditto.sh and darwinbuild.sh can be used. Cheers, Dave

1 0

Full Darwin
by Franco Lucchini 07 Mar '08

07 Mar '08

I saw that you put online all of the root packages corresponding to the official sources listing of the Darwin 9.2-9.1-9.0 releases, and I was wondering if unpacking the needed base packages I would be able to create a bootable version of Darwin to be run on a generic PC [not a mac] without breaking the APSL license agreement. The target is to have a small firewall/vpn/mailserver solution based upon Darwin 9.x. Thank you all Franco

1 0

Build X11-0.40 fails with No rule to make target `install'
by Gerald Boutwell 06 Mar '08

06 Mar '08

Hello list, I grep'd the archives but didn't see any relevant posts. I've also done a bit of work to figure this out, but it seems to me to be an X11 package specific problem. Vitals: PowerPC Dual 450 Darwin 8.0.1 (Installed from Binary ISO available from Apple) subversion 1.3.2 (compiled from scratch) darwinbuild CVS (03-03-2008, compiled from scratch) General Background: I'm fairly new to Darwin. I understand that Darwin is not OS X. I've played with various Linux distros and am marginally comfortable with compiling from source. I'm fairly certain that the format of the disk space used as a build area is plain HFSPlus journaled (so breaks the darwinbuild suggestion of UFS or HFSPlus Case-Sensitive). I created a /Builds/8A428 folder structure, on my hard drive, where I then performed "darwinbuild -init 8A428" and subsequent commands. Issue Background: My first shot at "darwinbuild X11" failed with "make: command not found". I confirmed that there was no make in the BuildRoot substructure. Without a good idea of how to get it there, I chose to perform a "darwinbuild cron" which brought a large list of roots down which included make. After "darwinbuild cron" and "darwinbuild crontabs" I figured the make dependency was resolved, so I fired up another "darwinbuild X11". This one failed because make could not find an install rule. Review of the darwinbuild shell script says that it will cd into the SRCROOT (defined as /SourceCache/X11/X11-0.40) and try to execute "make install ...". There is no Makefile present in /SourceCache/X11/X11-0.40 - so the error is correct, there is no install rule. I looked into the xc folder (/SourceCache/X11/X11-0.40/xc) and it's Makefile included an install rule. I got stuck at this point because I could not figure out how to tell darwinbuild to run the make install command in the xc folder instead of the X11-0.40 folder. I thought about adding a Makefile to the X11-0.40 folder, but figured this was more of a cludge than reproducible fix. I also wondered how it could be performing a make install without first performing make. The full log of the no install rule failure is below. So, what do I need to do to correctly build X11 using darwinbuild? Log: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ BUILDING X11-0.40~4 on Wed Mar 5 23:25:53 PST 2008 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Build configuration: Build host: AhLiza Build tool: make Build action: install Build number: 8A428 Host kernel version: Darwin Kernel Version 8.0.1: Fri Apr 29 12:15:33 PDT 2005; root:xnu-792.obj/RELEASE_PPC cc version: gcc version 3.3 20030304 (Apple Computer, Inc. build 1809) cctools version: version cctools-576.obj, GNU assembler version 1.38 make version: GNU Make 3.80 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Build parameters: SRCROOT: /SourceCache/X11/X11-0.40 OBJROOT: /private/var/tmp/X11/X11-0.40.obj SYMROOT: /private/var/tmp/X11/X11-0.40.sym DSTROOT: /private/var/tmp/X11/X11-0.40.root RC_ProjectName: X11 RC_ProjectSourceVersion: 0.40 RC_ProjectNameAndSourceVersion: X11-0.40 RC_ProjectBuildVersion: 4 INSTALLED_PRODUCT_ASIDES: YES MACOSX_DEPLOYMENT_TARGET: 10.4 NEXT_ROOT: RC_ARCHS: ppc i386 RC_CFLAGS: -pipe -no-cpp-precomp -arch ppc -arch i386 RC_JASPER: YES RC_NONARCH_CFLAGS: -pipe -no-cpp-precomp RC_OS: macos RC_PRIVATE: /private RC_RELEASE: Tiger RC_USE_GCC35_FOR_PPC64: YES RC_XBS: YES RC_i386: YES RC_ppc: YES SEPARATE_STRIP: YES UNAME_RELEASE: 8.0 UNAME_SYSNAME: Darwin ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Environment variables: CHROOTED=YES DARWINBUILD_BUILD=8A428 DARWINXREF_DB_FILE=/Builds/Build8A428/.build/xref.db DARWIN_BUILDROOT=/Builds/Build8A428 DSTROOT=/private/var/tmp/X11/X11-0.40.root GROUP=wheel HOME=/var/root INSTALLED_PRODUCT_ASIDES=YES LOGNAME=root MACOSX_DEPLOYMENT_TARGET=10.4 NEXT_ROOT= OBJROOT=/private/var/tmp/X11/X11-0.40.obj PATH=/bin:/sbin:/usr/bin:/usr/sbin/:/usr/local/bin:/usr/local/sbin RC_ARCHS=ppc i386 RC_CFLAGS=-pipe -no-cpp-precomp -arch ppc -arch i386 RC_JASPER=YES RC_NONARCH_CFLAGS=-pipe -no-cpp-precomp RC_OS=macos RC_PRIVATE=/private RC_ProjectBuildVersion=4 RC_ProjectName=X11 RC_ProjectNameAndSourceVersion=X11-0.40 RC_ProjectSourceVersion=0.40 RC_RELEASE=Tiger RC_USE_GCC35_FOR_PPC64=YES RC_XBS=YES RC_i386=YES RC_ppc=YES SEPARATE_STRIP=YES SHELL=/bin/sh SRCROOT=/SourceCache/X11/X11-0.40 SYMROOT=/private/var/tmp/X11/X11-0.40.sym UNAME_RELEASE=8.0 UNAME_SYSNAME=Darwin USER=root _=/usr/bin/printenv ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Installed Roots: CF -> b264bbb82bdb0c7aa25bd0bb0f9f28ddbad3fd23 CarbonHeaders.hdrs -> 93632322447548a2caac77de52fa5515a0204c01 CoreOSMakefiles -> 1350746aa28c6ef07f0efe8f554e1748fbfdf958 Csu -> 6ac48934fd893ea791d9e1bc574bffc4fc72fbef DirectoryService -> 280f43fab451de41c8f89a385d0a745561168443 ICU -> 5fc5a52f209a9194a05d19c2b9f245d83b75faf8 IOKitUser -> 1e4ead012704c8a525c57c611062e0b568a81b39 Libc_headers.hdrs -> 2b2c02da762384afba9484594d993d1cf1b96fea Libm -> e7c72b849ad9ac6022a76b9563204ee0adc00ae4 Libmx -> b9da2b384d44f3397e652cf16a08b4101c9525b4 Libsystem -> 8bd2c9408d92a280a353f002442001d5796ca4d7 OpenSSL -> 3a59f4083a3d4a14c78065b97713ac81daf4491b Security -> 80d485d6b31df3335a795d43a9464218cfe8726b architecture.hdrs -> 79ce051f87c277f9e10934acc7947a85dc3ef195 bash -> 7cd8b8a02112e7464dd19197952883ed55fcc833 bootstrap_cmds -> 34d620f454aa1506d7260c45b7d136ec259032b9 bsdmake -> 8f7d9db5bb069f4ef9aa131fb22f542fa91d1495 bsm -> 202b1b62e85f868ee5af8dd0f75e407869e4e2e6 cctools -> b3ce07830230187d119e9fd78427ebf33839a6a8 configd -> 77f0b5834ce412f5c2e3543783587d2482a186a8 cxxfilt -> 0f1c8cd05e58cd26177a799e8689fbd6e5a460d0 developer_cmds -> 97de821bdf2d4bf6ae45dba30c883ef1df42c805 dyld -> 79498abcc7ddf0e64c0c95b9ae3fc197ab1b8dc5 file_cmds -> c315ff919e144c3c0a6b6dcab27ddab963f862c5 files -> 4b70824037e82adae9fae9ac460c4b01aa587e1d gcc_os -> 13a3a65cfef230944a81065b4cc2b836f1191015 gcc_select -> b4e81cd0ef56b531db656087e45cb3fb4e38df2c gnumake -> 516944e5a6359a87ee20c316efed975ad885a2bb gnuzip -> 6bd9257162f7d8bec3ee54cf15b3efef16dba0fc libedit -> 8de0cfa06994ac04fe3e6a116e0012b87af5f66b libiconv -> 8841b8684979b72c207a7f28e7a89130577d00e7 misc_cmds -> a044d8cb7eaf3e553b40ecbb50185a07e4acb609 ncurses -> b2504667eb0fe184182d64daf5f0c77876bc2f42 netinfo -> 9a4986cf8c1f30e724f1b8b0ad4f2c348cbd26e8 objc4 -> 2854b6f582e66a66302dabf61d5b7c7aa8953e38 pam -> ab66376a48b52e7009f7dbc853649ea10094b3c1 passwordserver_sasl -> 206d59dfbb1daaf3b1a6a9c69cecab983fb4228f shell_cmds -> fbef044eafb1359dbc49142b9bf115c381332833 system_cmds -> 5d2e40b16237a9d5525fcc287f3749c3d3fc70b5 text_cmds -> 317b58a3b6190559c7ff33160e012e1fa1e63af1 xnu.hdrs -> b10bb94f704d916e7568b642b20cd80caad3cdf8 zlib -> 447c961e74f145a75de72e0b0312e53c818fb93f ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ make install "SRCROOT=/SourceCache/X11/X11-0.40" "OBJROOT=/private/var/tmp/X11/X11-0.40.obj" "SYMROOT=/private/var/tmp/X11/X11-0.40.sym" "DSTROOT=/private/var/tmp/X11/X11-0.40.root" "RC_ProjectName=X11" "RC_ProjectSourceVersion=0.40" "RC_ProjectNameAndSourceVersion=X11-0.40" "RC_ProjectBuildVersion=4" "INSTALLED_PRODUCT_ASIDES=YES" "MACOSX_DEPLOYMENT_TARGET=10.4" "NEXT_ROOT=" "RC_ARCHS=ppc i386" "RC_CFLAGS=-pipe -no-cpp-precomp -arch ppc -arch i386" "RC_JASPER=YES" "RC_NONARCH_CFLAGS=-pipe -no-cpp-precomp" "RC_OS=macos" "RC_PRIVATE=/private" "RC_RELEASE=Tiger" "RC_USE_GCC35_FOR_PPC64=YES" "RC_XBS=YES" "RC_i386=YES" "RC_ppc=YES" "SEPARATE_STRIP=YES" "UNAME_RELEASE=8.0" "UNAME_SYSNAME=Darwin" < /dev/null ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Build log begins here: make: *** No rule to make target `install'. Stop. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ BUILD TIME: 0h 0m 0s EXIT STATUS: 2

1 0