[darwinbuild] First use of darwinbuild
Hi All: I am attempting to build Kerberos via darwinbuild (which looks to be a really neat tool). I followed the installation/initialization instructions as per the readme file in the distribution (pretty much following them word for word), and then I tried to actually build Kerberos with this command /usr/local/bin/darwinbuild Kerberos 62. It downloaded quite a few files and then when it actually tried to do the make, it couldn't find make. The error is: private/var/tmp/Kerberos/build-Kerberos-62-2.sh line 96: make command not found. (It also couldn't find date, hostname, tail and cut). Obviously I've got a simple configuration problem. Can you point me to the error of my ways? I'm using Mac OS X 10.4.2 and xCode 2.0 Thanks in advance for your time John Cebasek johnc@cryptocard.com
Hi All: So I got a little further by building the kernel (xnu) first. That caused quite a few dependent projects to be loaded and built. So that fixes the missing make, date, localhost problem. But now when I try and build Kerberos, I get a few errors that I can't figure out. The first is: "C compiler cannot create executables" and the second is: cd /private/var/tmp/Kerberos/Kerberos-62.sym/BuiltProducts/Kerberos5.intermedia tes/build/util/et: No such file or directory. To (try) and correct the first error, I did an archive and install of Tiger and then reinstalled xCode 2.1 just incase there was a problem when I did the update from xCode 2.0 to 2.1. But it didn't seem to do much. Any suggestions on to how to correct these errors? Thanks in advance for your time. Best Regards John Cebasek johnc@cryptocard.com ----- Original Message ----- From: John Cebasek To: darwinbuild@opendarwin.org Sent: Wednesday, July 27, 2005 5:16 PM Subject: [darwinbuild] First use of darwinbuild Hi All: I am attempting to build Kerberos via darwinbuild (which looks to be a really neat tool). I followed the installation/initialization instructions as per the readme file in the distribution (pretty much following them word for word), and then I tried to actually build Kerberos with this command /usr/local/bin/darwinbuild Kerberos 62. It downloaded quite a few files and then when it actually tried to do the make, it couldn't find make. The error is: private/var/tmp/Kerberos/build-Kerberos-62-2.sh line 96: make command not found. (It also couldn't find date, hostname, tail and cut). Obviously I've got a simple configuration problem. Can you point me to the error of my ways? I'm using Mac OS X 10.4.2 and xCode 2.0 Thanks in advance for your time John Cebasek johnc@cryptocard.com _______________________________________________ darwinbuild mailing list darwinbuild@opendarwin.org http://www.opendarwin.org/mailman/listinfo/darwinbuild
As you've noticed, DarwinBuild appears to be missing the Kerberos's dependency information. Kerberos is a bit of a pathological case, since it requires Xcode to build, and it requires API that is not available on a pure-Darwin system. Luckily I think the dependency and API issues can be worked around by passing -nochroot to the darwinbuild command. This instructs DarwinBuild to build "out in the open" and gives it access to things that Kerberos will need, like the CoreServices framework. However, it appears the Kerberos relies on some PrivateHeaders from the Security framework, so to take this approach you'd need to install them on your base system. They're available at <http:// darwinsource.opendarwin.org/Headers/8C46/Security.hdrs.tar.gz>. There's a second issue, which is that DarwinBuild tries to produce universal binaries by default. You'll need to update to the latest DarwinBuild in CVS to get a bug fix related to editing build information. I also had to make a change to the default 8B15.plist, so you'll need to reload that. After upgrading darwinbuild, from your build directory: # rm .build/8B15.plist # darwinbuild -init 8C46 # darwinxref -b 8A428 edit Change the RC_ARCHS="ppc i386"; line in the environment dictionary to: RC_ARCHS="ppc"; Then you should be able to build Kerberos! Thanks, - Kevin On Jul 28, 2005, at 12:05 PM, John Cebasek wrote:
Hi All:
So I got a little further by building the kernel (xnu) first. That caused quite a few dependent projects to be loaded and built. So that fixes the missing make, date, localhost problem.
But now when I try and build Kerberos, I get a few errors that I can't figure out. The first is:
"C compiler cannot create executables" and the second is: cd /private/var/tmp/Kerberos/Kerberos-62.sym/BuiltProducts/ Kerberos5.intermedia tes/build/util/et: No such file or directory.
To (try) and correct the first error, I did an archive and install of Tiger and then reinstalled xCode 2.1 just incase there was a problem when I did the update from xCode 2.0 to 2.1.
But it didn't seem to do much.
Any suggestions on to how to correct these errors?
Thanks in advance for your time.
Best Regards
John Cebasek johnc@cryptocard.com
Hi All: Thanks to Garth and Kevin, alot more of the code is compiling. But I've run into a bit of a problem. In the linking of KerberosFrameworks failing it's trying to open /AppleInternal/OrderFiles/Kerberos.order for -sectorder __TEXT __text. The only think in /AppleInternal is a directory called Developer. I see the Kerberos.order file in Common/Scripts/. Is the Kerberos.order file supposed to be moved from Common/Scripts to AppleInternal/Orderfiles, or what? Any info would be appreciated. Thanks in advance John ----- Original Message ----- From: "Kevin Van Vechten" <kevin@opendarwin.org> To: "John Cebasek" <johnc@cryptocard.com> Cc: <darwinbuild@opendarwin.org> Sent: Thursday, July 28, 2005 8:17 PM Subject: Re: [darwinbuild] First use of darwinbuild
As you've noticed, DarwinBuild appears to be missing the Kerberos's dependency information.
Kerberos is a bit of a pathological case, since it requires Xcode to build, and it requires API that is not available on a pure-Darwin system.
Luckily I think the dependency and API issues can be worked around by passing -nochroot to the darwinbuild command. This instructs DarwinBuild to build "out in the open" and gives it access to things that Kerberos will need, like the CoreServices framework. However, it appears the Kerberos relies on some PrivateHeaders from the Security framework, so to take this approach you'd need to install them on your base system. They're available at <http:// darwinsource.opendarwin.org/Headers/8C46/Security.hdrs.tar.gz>.
There's a second issue, which is that DarwinBuild tries to produce universal binaries by default. You'll need to update to the latest DarwinBuild in CVS to get a bug fix related to editing build information. I also had to make a change to the default 8B15.plist, so you'll need to reload that.
After upgrading darwinbuild, from your build directory: # rm .build/8B15.plist # darwinbuild -init 8C46 # darwinxref -b 8A428 edit
Change the RC_ARCHS="ppc i386"; line in the environment dictionary to: RC_ARCHS="ppc";
Then you should be able to build Kerberos!
Thanks,
- Kevin
On Jul 28, 2005, at 12:05 PM, John Cebasek wrote:
Hi All:
So I got a little further by building the kernel (xnu) first. That caused quite a few dependent projects to be loaded and built. So that fixes the missing make, date, localhost problem.
But now when I try and build Kerberos, I get a few errors that I can't figure out. The first is:
"C compiler cannot create executables" and the second is: cd /private/var/tmp/Kerberos/Kerberos-62.sym/BuiltProducts/ Kerberos5.intermedia tes/build/util/et: No such file or directory.
To (try) and correct the first error, I did an archive and install of Tiger and then reinstalled xCode 2.1 just incase there was a problem when I did the update from xCode 2.0 to 2.1.
But it didn't seem to do much.
Any suggestions on to how to correct these errors?
Thanks in advance for your time.
Best Regards
John Cebasek johnc@cryptocard.com
Yes, you can either copy the provided order file to BuildRoot/ AppleInternal/OrderFiles/Kerberos.order, or you can `touch BuildRoot/ AppleInternal/OrderFiles/Kerberos.order` (an empty order file is valid). - Kevin On Jul 29, 2005, at 9:19 AM, John Cebasek wrote:
Hi All:
Thanks to Garth and Kevin, alot more of the code is compiling. But I've run into a bit of a problem. In the linking of KerberosFrameworks failing it's trying to open /AppleInternal/OrderFiles/Kerberos.order for -sectorder __TEXT __text. The only think in /AppleInternal is a directory called Developer. I see the Kerberos.order file in Common/Scripts/.
Is the Kerberos.order file supposed to be moved from Common/Scripts to AppleInternal/Orderfiles, or what?
Any info would be appreciated.
Thanks in advance
John ----- Original Message ----- From: "Kevin Van Vechten" <kevin@opendarwin.org> To: "John Cebasek" <johnc@cryptocard.com> Cc: <darwinbuild@opendarwin.org> Sent: Thursday, July 28, 2005 8:17 PM Subject: Re: [darwinbuild] First use of darwinbuild
As you've noticed, DarwinBuild appears to be missing the Kerberos's dependency information.
Kerberos is a bit of a pathological case, since it requires Xcode to build, and it requires API that is not available on a pure-Darwin system.
Luckily I think the dependency and API issues can be worked around by passing -nochroot to the darwinbuild command. This instructs DarwinBuild to build "out in the open" and gives it access to things that Kerberos will need, like the CoreServices framework. However, it appears the Kerberos relies on some PrivateHeaders from the Security framework, so to take this approach you'd need to install them on your base system. They're available at <http:// darwinsource.opendarwin.org/Headers/8C46/Security.hdrs.tar.gz>.
There's a second issue, which is that DarwinBuild tries to produce universal binaries by default. You'll need to update to the latest DarwinBuild in CVS to get a bug fix related to editing build information. I also had to make a change to the default 8B15.plist, so you'll need to reload that.
After upgrading darwinbuild, from your build directory: # rm .build/8B15.plist # darwinbuild -init 8C46 # darwinxref -b 8A428 edit
Change the RC_ARCHS="ppc i386"; line in the environment dictionary to: RC_ARCHS="ppc";
Then you should be able to build Kerberos!
Thanks,
- Kevin
On Jul 28, 2005, at 12:05 PM, John Cebasek wrote:
Hi All:
So I got a little further by building the kernel (xnu) first. That caused quite a few dependent projects to be loaded and built. So that fixes the missing make, date, localhost problem.
But now when I try and build Kerberos, I get a few errors that I can't figure out. The first is:
"C compiler cannot create executables" and the second is: cd /private/var/tmp/Kerberos/Kerberos-62.sym/BuiltProducts/ Kerberos5.intermedia tes/build/util/et: No such file or directory.
To (try) and correct the first error, I did an archive and install of Tiger and then reinstalled xCode 2.1 just incase there was a problem when I did the update from xCode 2.0 to 2.1.
But it didn't seem to do much.
Any suggestions on to how to correct these errors?
Thanks in advance for your time.
Best Regards
John Cebasek johnc@cryptocard.com
Hi: The link line in the build is -sectorder /AppleInternal/OrderFiles/Kerberos.order. Shouldn't it have the BuildRoot (et al) 'prefix'? Thanks John ----- Original Message ----- From: "Kevin Van Vechten" <kevin@opendarwin.org> To: "John Cebasek" <johnc@cryptocard.com> Cc: <darwinbuild@opendarwin.org> Sent: Friday, July 29, 2005 12:29 PM Subject: Re: [darwinbuild] First use of darwinbuild
Yes, you can either copy the provided order file to BuildRoot/ AppleInternal/OrderFiles/Kerberos.order, or you can `touch BuildRoot/ AppleInternal/OrderFiles/Kerberos.order` (an empty order file is valid).
- Kevin
On Jul 29, 2005, at 9:19 AM, John Cebasek wrote:
Hi All:
Thanks to Garth and Kevin, alot more of the code is compiling. But I've run into a bit of a problem. In the linking of KerberosFrameworks failing it's trying to open /AppleInternal/OrderFiles/Kerberos.order for -sectorder __TEXT __text. The only think in /AppleInternal is a directory called Developer. I see the Kerberos.order file in Common/Scripts/.
Is the Kerberos.order file supposed to be moved from Common/Scripts to AppleInternal/Orderfiles, or what?
Any info would be appreciated.
Thanks in advance
John ----- Original Message ----- From: "Kevin Van Vechten" <kevin@opendarwin.org> To: "John Cebasek" <johnc@cryptocard.com> Cc: <darwinbuild@opendarwin.org> Sent: Thursday, July 28, 2005 8:17 PM Subject: Re: [darwinbuild] First use of darwinbuild
As you've noticed, DarwinBuild appears to be missing the Kerberos's dependency information.
Kerberos is a bit of a pathological case, since it requires Xcode to build, and it requires API that is not available on a pure-Darwin system.
Luckily I think the dependency and API issues can be worked around by passing -nochroot to the darwinbuild command. This instructs DarwinBuild to build "out in the open" and gives it access to things that Kerberos will need, like the CoreServices framework. However, it appears the Kerberos relies on some PrivateHeaders from the Security framework, so to take this approach you'd need to install them on your base system. They're available at <http:// darwinsource.opendarwin.org/Headers/8C46/Security.hdrs.tar.gz>.
There's a second issue, which is that DarwinBuild tries to produce universal binaries by default. You'll need to update to the latest DarwinBuild in CVS to get a bug fix related to editing build information. I also had to make a change to the default 8B15.plist, so you'll need to reload that.
After upgrading darwinbuild, from your build directory: # rm .build/8B15.plist # darwinbuild -init 8C46 # darwinxref -b 8A428 edit
Change the RC_ARCHS="ppc i386"; line in the environment dictionary to: RC_ARCHS="ppc";
Then you should be able to build Kerberos!
Thanks,
- Kevin
On Jul 28, 2005, at 12:05 PM, John Cebasek wrote:
Hi All:
So I got a little further by building the kernel (xnu) first. That caused quite a few dependent projects to be loaded and built. So that fixes the missing make, date, localhost problem.
But now when I try and build Kerberos, I get a few errors that I can't figure out. The first is:
"C compiler cannot create executables" and the second is: cd /private/var/tmp/Kerberos/Kerberos-62.sym/BuiltProducts/ Kerberos5.intermedia tes/build/util/et: No such file or directory.
To (try) and correct the first error, I did an archive and install of Tiger and then reinstalled xCode 2.1 just incase there was a problem when I did the update from xCode 2.0 to 2.1.
But it didn't seem to do much.
Any suggestions on to how to correct these errors?
Thanks in advance for your time.
Best Regards
John Cebasek johnc@cryptocard.com
I forgot your usage is different than usual. Under normal circumstances, chroot(8) is called to set BuildRoot as the root directory before building. However, since you're building Kerberos with the "-nochroot" option, you'll need to actually create/ copy this file in the root file system at /AppleInternal/OrderFiles/ Kerberos.order. - Kevin On Jul 29, 2005, at 9:54 AM, John Cebasek wrote:
Hi:
The link line in the build is -sectorder /AppleInternal/OrderFiles/Kerberos.order. Shouldn't it have the BuildRoot (et al) 'prefix'?
Thanks
John ----- Original Message ----- From: "Kevin Van Vechten" <kevin@opendarwin.org> To: "John Cebasek" <johnc@cryptocard.com> Cc: <darwinbuild@opendarwin.org> Sent: Friday, July 29, 2005 12:29 PM Subject: Re: [darwinbuild] First use of darwinbuild
Yes, you can either copy the provided order file to BuildRoot/ AppleInternal/OrderFiles/Kerberos.order, or you can `touch BuildRoot/ AppleInternal/OrderFiles/Kerberos.order` (an empty order file is valid).
- Kevin
On Jul 29, 2005, at 9:19 AM, John Cebasek wrote:
Hi All:
Thanks to Garth and Kevin, alot more of the code is compiling. But I've run into a bit of a problem. In the linking of KerberosFrameworks failing it's trying to open /AppleInternal/OrderFiles/Kerberos.order for - sectorder __TEXT __text. The only think in /AppleInternal is a directory called Developer. I see the Kerberos.order file in Common/Scripts/.
Is the Kerberos.order file supposed to be moved from Common/ Scripts to AppleInternal/Orderfiles, or what?
Any info would be appreciated.
Thanks in advance
John ----- Original Message ----- From: "Kevin Van Vechten" <kevin@opendarwin.org> To: "John Cebasek" <johnc@cryptocard.com> Cc: <darwinbuild@opendarwin.org> Sent: Thursday, July 28, 2005 8:17 PM Subject: Re: [darwinbuild] First use of darwinbuild
As you've noticed, DarwinBuild appears to be missing the Kerberos's dependency information.
Kerberos is a bit of a pathological case, since it requires Xcode to build, and it requires API that is not available on a pure-Darwin system.
Luckily I think the dependency and API issues can be worked around by passing -nochroot to the darwinbuild command. This instructs DarwinBuild to build "out in the open" and gives it access to things that Kerberos will need, like the CoreServices framework. However, it appears the Kerberos relies on some PrivateHeaders from the Security framework, so to take this approach you'd need to install them on your base system. They're available at <http:// darwinsource.opendarwin.org/Headers/8C46/Security.hdrs.tar.gz>.
There's a second issue, which is that DarwinBuild tries to produce universal binaries by default. You'll need to update to the latest DarwinBuild in CVS to get a bug fix related to editing build information. I also had to make a change to the default 8B15.plist, so you'll need to reload that.
After upgrading darwinbuild, from your build directory: # rm .build/8B15.plist # darwinbuild -init 8C46 # darwinxref -b 8A428 edit
Change the RC_ARCHS="ppc i386"; line in the environment dictionary to: RC_ARCHS="ppc";
Then you should be able to build Kerberos!
Thanks,
- Kevin
On Jul 28, 2005, at 12:05 PM, John Cebasek wrote:
Hi All:
So I got a little further by building the kernel (xnu) first. That caused quite a few dependent projects to be loaded and built. So that fixes the missing make, date, localhost problem.
But now when I try and build Kerberos, I get a few errors that I can't figure out. The first is:
"C compiler cannot create executables" and the second is: cd /private/var/tmp/Kerberos/Kerberos-62.sym/BuiltProducts/ Kerberos5.intermedia tes/build/util/et: No such file or directory.
To (try) and correct the first error, I did an archive and install of Tiger and then reinstalled xCode 2.1 just incase there was a problem when I did the update from xCode 2.0 to 2.1.
But it didn't seem to do much.
Any suggestions on to how to correct these errors?
Thanks in advance for your time.
Best Regards
John Cebasek johnc@cryptocard.com
_______________________________________________ darwinbuild mailing list darwinbuild@opendarwin.org http://www.opendarwin.org/mailman/listinfo/darwinbuild
Kevin: Found out what my error was. I followed (step by step) the instructions for setting up darwinbuild (including the creation of a disk image to store the files). Now that I've got darwin build on my main drive with the /AppleInternal/OrderFiles/Kerberos.order at the root of the main drive, Kerberos builds like a charm. Thanks for your assistance. John ----- Original Message ----- From: "Kevin Van Vechten" <kevin@opendarwin.org> To: "John Cebasek" <johnc@cryptocard.com> Cc: <darwinbuild@opendarwin.org> Sent: Friday, July 29, 2005 1:27 PM Subject: Re: [darwinbuild] First use of darwinbuild
I forgot your usage is different than usual.
Under normal circumstances, chroot(8) is called to set BuildRoot as the root directory before building. However, since you're building Kerberos with the "-nochroot" option, you'll need to actually create/ copy this file in the root file system at /AppleInternal/OrderFiles/ Kerberos.order.
- Kevin
On Jul 29, 2005, at 9:54 AM, John Cebasek wrote:
Hi:
The link line in the build is -sectorder /AppleInternal/OrderFiles/Kerberos.order. Shouldn't it have the BuildRoot (et al) 'prefix'?
Thanks
John ----- Original Message ----- From: "Kevin Van Vechten" <kevin@opendarwin.org> To: "John Cebasek" <johnc@cryptocard.com> Cc: <darwinbuild@opendarwin.org> Sent: Friday, July 29, 2005 12:29 PM Subject: Re: [darwinbuild] First use of darwinbuild
Yes, you can either copy the provided order file to BuildRoot/ AppleInternal/OrderFiles/Kerberos.order, or you can `touch BuildRoot/ AppleInternal/OrderFiles/Kerberos.order` (an empty order file is valid).
- Kevin
On Jul 29, 2005, at 9:19 AM, John Cebasek wrote:
Hi All:
Thanks to Garth and Kevin, alot more of the code is compiling. But I've run into a bit of a problem. In the linking of KerberosFrameworks failing it's trying to open /AppleInternal/OrderFiles/Kerberos.order for - sectorder __TEXT __text. The only think in /AppleInternal is a directory called Developer. I see the Kerberos.order file in Common/Scripts/.
Is the Kerberos.order file supposed to be moved from Common/ Scripts to AppleInternal/Orderfiles, or what?
Any info would be appreciated.
Thanks in advance
John ----- Original Message ----- From: "Kevin Van Vechten" <kevin@opendarwin.org> To: "John Cebasek" <johnc@cryptocard.com> Cc: <darwinbuild@opendarwin.org> Sent: Thursday, July 28, 2005 8:17 PM Subject: Re: [darwinbuild] First use of darwinbuild
As you've noticed, DarwinBuild appears to be missing the Kerberos's dependency information.
Kerberos is a bit of a pathological case, since it requires Xcode to build, and it requires API that is not available on a pure-Darwin system.
Luckily I think the dependency and API issues can be worked around by passing -nochroot to the darwinbuild command. This instructs DarwinBuild to build "out in the open" and gives it access to things that Kerberos will need, like the CoreServices framework. However, it appears the Kerberos relies on some PrivateHeaders from the Security framework, so to take this approach you'd need to install them on your base system. They're available at <http:// darwinsource.opendarwin.org/Headers/8C46/Security.hdrs.tar.gz>.
There's a second issue, which is that DarwinBuild tries to produce universal binaries by default. You'll need to update to the latest DarwinBuild in CVS to get a bug fix related to editing build information. I also had to make a change to the default 8B15.plist, so you'll need to reload that.
After upgrading darwinbuild, from your build directory: # rm .build/8B15.plist # darwinbuild -init 8C46 # darwinxref -b 8A428 edit
Change the RC_ARCHS="ppc i386"; line in the environment dictionary to: RC_ARCHS="ppc";
Then you should be able to build Kerberos!
Thanks,
- Kevin
On Jul 28, 2005, at 12:05 PM, John Cebasek wrote:
Hi All:
So I got a little further by building the kernel (xnu) first. That caused quite a few dependent projects to be loaded and built. So that fixes the missing make, date, localhost problem.
But now when I try and build Kerberos, I get a few errors that I can't figure out. The first is:
"C compiler cannot create executables" and the second is: cd /private/var/tmp/Kerberos/Kerberos-62.sym/BuiltProducts/ Kerberos5.intermedia tes/build/util/et: No such file or directory.
To (try) and correct the first error, I did an archive and install of Tiger and then reinstalled xCode 2.1 just incase there was a problem when I did the update from xCode 2.0 to 2.1.
But it didn't seem to do much.
Any suggestions on to how to correct these errors?
Thanks in advance for your time.
Best Regards
John Cebasek johnc@cryptocard.com
_______________________________________________ darwinbuild mailing list darwinbuild@opendarwin.org http://www.opendarwin.org/mailman/listinfo/darwinbuild
participants (2)
-
John Cebasek
-
Kevin Van Vechten