October 2015 - macports-changes - lists.macosforge.org

[140721] users/devans/GNOME-3/stable/dports/graphics/clutter-gst3/Portfile
by devans＠macports.org 01 Oct '15

01 Oct '15

Revision: 140721 https://trac.macports.org/changeset/140721 Author: devans(a)macports.org Date: 2015-10-01 04:43:32 -0700 (Thu, 01 Oct 2015) Log Message: ----------- GNOME-3/stable: clutter-gst3, update to version 3.0.12. Modified Paths: -------------- users/devans/GNOME-3/stable/dports/graphics/clutter-gst3/Portfile Modified: users/devans/GNOME-3/stable/dports/graphics/clutter-gst3/Portfile =================================================================== --- users/devans/GNOME-3/stable/dports/graphics/clutter-gst3/Portfile 2015-10-01 04:39:58 UTC (rev 140720) +++ users/devans/GNOME-3/stable/dports/graphics/clutter-gst3/Portfile 2015-10-01 11:43:32 UTC (rev 140721) @@ -6,7 +6,7 @@ name clutter-gst3 set gname clutter-gst -version 3.0.10 +version 3.0.12 license LGPL-2.1+ set branch [string range $version 0 [expr [string last "." $version] - 1]] categories graphics @@ -23,8 +23,8 @@ distname ${gname}-${version} -checksums rmd160 e10dffa923564ad08ceafd24b18978a1a390c7ef \ - sha256 2dbdbc3292e92684bbdbf1694c61f6b781f5810e4d79a415dfdee2f7ee42148c +checksums rmd160 d3f4019bc16a7dfc02e368f9419e09239eb57b4f \ + sha256 cd2b2f8db9c21d6295ed0b2811d4c3036fac5796be71d7affdb2b8746f12066c depends_build port:pkgconfig

1 0

[140720] trunk/dports/science/OpenCoarrays/Portfile
by eborisch＠macports.org 01 Oct '15

01 Oct '15

Revision: 140720 https://trac.macports.org/changeset/140720 Author: eborisch(a)macports.org Date: 2015-09-30 21:39:58 -0700 (Wed, 30 Sep 2015) Log Message: ----------- OpenCoarrays: Update to 1.0.2. Modified Paths: -------------- trunk/dports/science/OpenCoarrays/Portfile Modified: trunk/dports/science/OpenCoarrays/Portfile =================================================================== --- trunk/dports/science/OpenCoarrays/Portfile 2015-10-01 04:00:22 UTC (rev 140719) +++ trunk/dports/science/OpenCoarrays/Portfile 2015-10-01 04:39:58 UTC (rev 140720) @@ -6,9 +6,8 @@ PortGroup github 1.0 PortGroup mpi 1.0 -github.setup sourceryinstitute opencoarrays v1.0.0 +github.setup sourceryinstitute opencoarrays 1.0.2 name OpenCoarrays -version 1.0.0 categories science parallel devel platforms darwin license BSD @@ -35,8 +34,8 @@ } checksums \ - rmd160 96092add58f18eb1703bea988762830c4a2058d5 \ - sha256 a02703607f7d02537d36126bcba99d88731a0eb615c581487e93720e598bb72a + rmd160 877bf39c9ce9949bffa6579e9fd476507472513c \ + sha256 286930d63841a9be36849aedf912655fa33119de8fb6eaacaaeee35bb8ec7448 #patchfiles tests-compiler.patch

1 0

[140719] trunk/dports/science/htcondor
by aronnax＠macports.org 01 Oct '15

01 Oct '15

Revision: 140719 https://trac.macports.org/changeset/140719 Author: aronnax(a)macports.org Date: 2015-09-30 21:00:22 -0700 (Wed, 30 Sep 2015) Log Message: ----------- htcondor: update to 8.4.0 Modified Paths: -------------- trunk/dports/science/htcondor/Portfile trunk/dports/science/htcondor/files/condor_config trunk/dports/science/htcondor/files/patch-build-cmake-CondorPackageConfig.cmake.diff trunk/dports/science/htcondor/files/patch-src-condor_scripts-macosx_rewrite_libs.diff trunk/dports/science/htcondor/files/patch-src-condor_utils-condor_config.cpp.diff trunk/dports/science/htcondor/files/patch-src-python-bindings-CMakeLists.txt.diff Modified: trunk/dports/science/htcondor/Portfile =================================================================== --- trunk/dports/science/htcondor/Portfile 2015-10-01 02:29:01 UTC (rev 140718) +++ trunk/dports/science/htcondor/Portfile 2015-10-01 04:00:22 UTC (rev 140719) @@ -7,9 +7,8 @@ PortGroup active_variants 1.1 PortGroup conflicts_build 1.0 -github.setup htcondor htcondor 8_2_3 V +github.setup htcondor htcondor 8_4_0 V version [strsed ${github.version} g/_/\./] -revision 1 maintainers aronnax categories science parallel net @@ -87,8 +86,8 @@ } -checksums rmd160 9bd1f88821b891c341aae71e1bfcf7a70af296d0 \ - sha256 d1e426f6dc20e5a8afeda16273d26f1d22891b2762c9369c97e438c4f77af6a9 +checksums rmd160 3f253ceadf68b14adc76b83bf6165e4b93974bcc \ + sha256 95abe172abd8ebf42333c8267972babba097ff5309f98e201b8e364f2a3add57 depends_build-append port:latex2html @@ -113,7 +112,7 @@ } # FIXME: Globus support is disabled because Globus is not available in MacPorts. -configure.args-append -DWITH_GLOBUS:BOOL="0" -DBUILD_TESTING:BOOL="0" +configure.args-append -DWITH_GLOBUS:BOOL="0" -DWITH_VOMS:BOOL="0" -DWITH_GSOAP:BOOL="0" -DBUILD_TESTING:BOOL="0" # Man pages are not part of the default build target. post-build { Modified: trunk/dports/science/htcondor/files/condor_config =================================================================== --- trunk/dports/science/htcondor/files/condor_config 2015-10-01 02:29:01 UTC (rev 140718) +++ trunk/dports/science/htcondor/files/condor_config 2015-10-01 04:00:22 UTC (rev 140719) @@ -49,6 +49,9 @@ ## What machine is your central manager? CONDOR_HOST = 127.0.0.1 +## Don't use DNS. +NO_DNS = True + ##-------------------------------------------------------------------- ## Pathnames: ##-------------------------------------------------------------------- @@ -144,7 +147,7 @@ ## FLOCK_FROM defines the machines where you would like to grant ## people access to your pool via flocking. (i.e. you are granting ## access to these machines to join your pool). -FLOCK_FROM = +#FLOCK_FROM = ## An example of this is: #FLOCK_FROM = somehost.friendly.domain, anotherhost.friendly.domain @@ -152,7 +155,7 @@ ## to flock to. (i.e. you are specifying the machines that you ## want your jobs to be negotiated at -- thereby specifying the ## pools they will run in.) -FLOCK_TO = +#FLOCK_TO = ## An example of this is: #FLOCK_TO = central_manager.friendly.domain, condor.cs.wisc.edu @@ -271,7 +274,7 @@ ## default values for any of these settings. If they are not ## defined, no attributes can be set with condor_config_val. -## Do you want to allow condor_config_val -reset to work at all? +## Do you want to allow condor_config_val -rset to work at all? ## This feature is disabled by default, so to enable, you must ## uncomment the following setting and change the value to "True". ## Note: changing this requires a restart not just a reconfig. @@ -334,7 +337,7 @@ ## Checkpoint server: ##-------------------------------------------------------------------- ## Do you want to use a checkpoint server if one is available? If a -## checkpoint server isn't available or USE_CKPT_SERVER is set to +## checkpoint server is not available or USE_CKPT_SERVER is set to ## False, checkpoints will be written to the local SPOOL directory on ## the submission machine. #USE_CKPT_SERVER = True @@ -398,25 +401,25 @@ #MAX_CONCURRENT_UPLOADS = 10 ## Condor needs to create a few lock files to synchronize access to -## various log files. Because of problems we've had with network +## various log files. Because of problems we had with network ## filesystems and file locking over the years, we HIGHLY recommend ## that you put these lock files on a local partition on each ## machine. If you don't have your LOCAL_DIR on a local partition, ## be sure to change this entry. Whatever user (or group) condor is ## running as needs to have write access to this directory. If ## you're not running as root, this is whatever user you started up -## the condor_master as. If you are running as root, and there's a -## condor account, it's probably condor. Otherwise, it's whatever +## the condor_master as. If you are running as root, and there is a +## condor account, it is probably condor. Otherwise, it is whatever ## you've set in the CONDOR_IDS environment variable. See the Admin ## manual for details on this. LOCK = $(LOG) ## If you don't use a fully qualified name in your /etc/hosts file ## (or NIS, etc.) for either your official hostname or as an alias, -## Condor wouldn't normally be able to use fully qualified names in +## Condor would not normally be able to use fully qualified names in ## places that it'd like to. You can set this parameter to the ## domain you'd like appended to your hostname, if changing your host -## information isn't a good option. This parameter must be set in +## information is not a good option. This parameter must be set in ## the global config file (not the LOCAL_CONFIG_FILE from above). #DEFAULT_DOMAIN_NAME = your.domain.name @@ -435,7 +438,7 @@ ## we don't do anything, and leave in place whatever limit was in ## effect when you started the Condor daemons. If this parameter is ## set and "True", we increase the limit to as large as it gets. If -## it's set to "False", we set the limit at 0 (which means that no +## it is set to "False", we set the limit at 0 (which means that no ## core files are even created). Core files greatly help the Condor ## developers debug any problems you might be having. #CREATE_CORE_FILES = True @@ -448,27 +451,6 @@ ## want. #ABORT_ON_EXCEPTION = False -## Condor Glidein downloads binaries from a remote server for the -## machines into which you're gliding. This saves you from manually -## downloading and installing binaries for every architecture you -## might want to glidein to. The default server is one maintained at -## The University of Wisconsin. If you don't want to use the UW -## server, you can set up your own and change the following to -## point to it, instead. -GLIDEIN_SERVER_URLS = \ - http://www.cs.wisc.edu/condor/glidein/binaries - -## List the sites you want to GlideIn to on the GLIDEIN_SITES. For example, -## if you'd like to GlideIn to some Alliance GiB resources, -## uncomment the line below. -## Make sure that $(GLIDEIN_SITES) is included in ALLOW_READ and -## ALLOW_WRITE, or else your GlideIns won't be able to join your pool. -## This is _NOT_ done for you by default, because it is an even better -## idea to use a strong security method (such as GSI) rather than -## host-based security for authorizing glideins. -#GLIDEIN_SITES = *.ncsa.uiuc.edu, *.cs.wisc.edu, *.mcs.anl.gov -#GLIDEIN_SITES = - ## If your site needs to use UID_DOMAIN settings (defined above) that ## are not real Internet domains that match the hostnames, you can ## tell Condor to trust whatever UID_DOMAIN a submit machine gives to @@ -521,7 +503,7 @@ ## credentials when sending them over the wire between daemons. ## Delegation can take up to a second, which is very slow when ## submitting a large number of jobs. Copying exposes the credential -## to third parties if Condor isn't set to encrypt communications. +## to third parties if Condor is not set to encrypt communications. ## By default, Condor will delegate rather than copy. #DELEGATE_JOB_GSI_CREDENTIALS = True @@ -555,6 +537,7 @@ ## chooses a network interface automatically. It tries to choose a public ## interface if one is available. If it cannot decide which of two interfaces ## to choose from, it will pick the first one. +BIND_ALL_INTERFACES = False NETWORK_INTERFACE = 127.0.0.1 ##-------------------------------------------------------------------- @@ -565,53 +548,54 @@ ## The flags given in ALL_DEBUG are shared between all daemons. ## -ALL_DEBUG = +#ALL_DEBUG = +#MAX_DEFAULT_LOG = 10 Mb -MAX_COLLECTOR_LOG = 1000000 -COLLECTOR_DEBUG = +#MAX_COLLECTOR_LOG = $(MAX_DEFAULT_LOG) +#COLLECTOR_DEBUG = -MAX_KBDD_LOG = 1000000 -KBDD_DEBUG = +#MAX_KBDD_LOG = $(MAX_DEFAULT_LOG) +#KBDD_DEBUG = -MAX_NEGOTIATOR_LOG = 1000000 -NEGOTIATOR_DEBUG = D_MATCH -MAX_NEGOTIATOR_MATCH_LOG = 1000000 +#MAX_NEGOTIATOR_LOG = $(MAX_DEFAULT_LOG) +#NEGOTIATOR_DEBUG = D_MATCH +#MAX_NEGOTIATOR_MATCH_LOG = $(MAX_DEFAULT_LOG) -MAX_SCHEDD_LOG = 1000000 -SCHEDD_DEBUG = D_PID +#MAX_SCHEDD_LOG = $(MAX_DEFAULT_LOG) +#SCHEDD_DEBUG = D_PID -MAX_SHADOW_LOG = 1000000 -SHADOW_DEBUG = +#MAX_SHADOW_LOG = $(MAX_DEFAULT_LOG) +#SHADOW_DEBUG = -MAX_STARTD_LOG = 1000000 -STARTD_DEBUG = +#MAX_STARTD_LOG = $(MAX_DEFAULT_LOG) +#STARTD_DEBUG = -MAX_STARTER_LOG = 1000000 +#MAX_STARTER_LOG = $(MAX_DEFAULT_LOG) -MAX_MASTER_LOG = 1000000 -MASTER_DEBUG = -## When the master starts up, should it truncate it's log file? +#MAX_MASTER_LOG = $(MAX_DEFAULT_LOG) +#MASTER_DEBUG = +## Truncates master log start up? #TRUNC_MASTER_LOG_ON_OPEN = False -MAX_JOB_ROUTER_LOG = 1000000 -JOB_ROUTER_DEBUG = +#MAX_JOB_ROUTER_LOG = $(MAX_DEFAULT_LOG) +#JOB_ROUTER_DEBUG = -MAX_ROOSTER_LOG = 1000000 -ROOSTER_DEBUG = +#MAX_ROOSTER_LOG = $(MAX_DEFAULT_LOG) +#ROOSTER_DEBUG = -MAX_SHARED_PORT_LOG = 1000000 -SHARED_PORT_DEBUG = +#MAX_SHARED_PORT_LOG = $(MAX_DEFAULT_LOG) +#SHARED_PORT_DEBUG = -MAX_HDFS_LOG = 1000000 -HDFS_DEBUG = +#MAX_HDFS_LOG = $(MAX_DEFAULT_LOG) +#HDFS_DEBUG = # High Availability Logs -MAX_HAD_LOG = 1000000 -HAD_DEBUG = -MAX_REPLICATION_LOG = 1000000 -REPLICATION_DEBUG = -MAX_TRANSFERER_LOG = 1000000 -TRANSFERER_DEBUG = +#MAX_HAD_LOG = $(MAX_DEFAULT_LOG) +#HAD_DEBUG = +#MAX_REPLICATION_LOG = $(MAX_DEFAULT_LOG) +#REPLICATION_DEBUG = +#MAX_TRANSFERER_LOG = $(MAX_DEFAULT_LOG) +#TRANSFERER_DEBUG = ## The daemons touch their log file periodically, even when they have @@ -690,55 +674,50 @@ ##################################################################### ## This where you choose the configuration that you would like to -## use. It has no defaults so it must be defined. We start this -## file off with the UWCS_* policy. +## use. If you dont specify, the default policy is a no-preemption +## policy. This is what older config files called TESTINGMODE_* ###################################################################### -## Also here is what is referred to as the TESTINGMODE_*, which is -## a quick hardwired way to test Condor with a simple no-preemption policy. -## Replace UWCS_* with TESTINGMODE_* if you wish to do testing mode. -## For example: -## WANT_SUSPEND = $(UWCS_WANT_SUSPEND) -## becomes -## WANT_SUSPEND = $(TESTINGMODE_WANT_SUSPEND) - # When should we only consider SUSPEND instead of PREEMPT? -WANT_SUSPEND = $(TESTINGMODE_WANT_SUSPEND) +#WANT_SUSPEND = False # When should we preempt gracefully instead of hard-killing? -WANT_VACATE = $(TESTINGMODE_WANT_VACATE) +#WANT_VACATE = False ## When is this machine willing to start a job? -START = $(TESTINGMODE_START) +#START = True -## When should a local universe job be allowed to start? -#START_LOCAL_UNIVERSE = TotalLocalJobsRunning < 200 - -## When should a scheduler universe job be allowed to start? -#START_SCHEDULER_UNIVERSE = TotalSchedulerJobsRunning < 200 - ## When to suspend a job? -SUSPEND = $(TESTINGMODE_SUSPEND) +#SUSPEND = False ## When to resume a suspended job? -CONTINUE = $(TESTINGMODE_CONTINUE) +#CONTINUE = True ## When to nicely stop a job? ## (as opposed to killing it instantaneously) -PREEMPT = $(TESTINGMODE_PREEMPT) +#PREEMPT = False ## When to instantaneously kill a preempting job ## (e.g. if a job is in the pre-empting stage for too long) -KILL = $(TESTINGMODE_KILL) +#KILL = False -PERIODIC_CHECKPOINT = $(TESTINGMODE_PERIODIC_CHECKPOINT) -PREEMPTION_REQUIREMENTS = $(TESTINGMODE_PREEMPTION_REQUIREMENTS) -PREEMPTION_RANK = $(TESTINGMODE_PREEMPTION_RANK) -NEGOTIATOR_PRE_JOB_RANK = $(TESTINGMODE_NEGOTIATOR_PRE_JOB_RANK) -NEGOTIATOR_POST_JOB_RANK = $(TESTINGMODE_NEGOTIATOR_POST_JOB_RANK) -MaxJobRetirementTime = $(UWCS_MaxJobRetirementTime) -CLAIM_WORKLIFE = $(TESTINGMODE_CLAIM_WORKLIFE) +## A non-zero value here is another way to have a no-preemption policy +## a job is given this many seconds to exit even when it is preempted. +#MaxJobRetirementTime = 0 +#PERIODIC_CHECKPOINT = ((time() - LastPeriodicCheckpoint)/60.0) > (180.0 + $RANDOM_INTEGER(-30,30,1)) +#PREEMPTION_REQUIREMENTS = False +#PREEMPTION_RANK = $(UWCS_PREEMPTION_RANK) +#NEGOTIATOR_PRE_JOB_RANK = RemoteOwner =?= UNDEFINED +#NEGOTIATOR_POST_JOB_RANK = (RemoteOwner =?= UNDEFINED) * (ifthenElse(isUndefined(KFlops), 1000, Kflops) - SlotID - 1.0e10*(Offline=?=True)) +#CLAIM_WORKLIFE = 1200 + +## When should a local universe job be allowed to start? +#START_LOCAL_UNIVERSE = TotalLocalJobsRunning < 200 + +## When should a scheduler universe job be allowed to start? +#START_SCHEDULER_UNIVERSE = TotalSchedulerJobsRunning < 200 + ##################################################################### ## This is the UWisc - CS Department Configuration. ##################################################################### @@ -866,7 +845,7 @@ ## would take place, allowing control to pass on to ## PREEMPTION_RANK. UWCS_NEGOTIATOR_POST_JOB_RANK = \ - (RemoteOwner =?= UNDEFINED) * (KFlops - SlotID - 1.0e10*(Offline=?=True)) + (RemoteOwner =?= UNDEFINED) * (ifthenElse(isUndefined(KFlops), 1000, Kflops) - SlotID - 1.0e10*(Offline=?=True)) ## The negotiator will not preempt a job running on a given machine ## unless the PREEMPTION_REQUIREMENTS expression evaluates to true @@ -880,14 +859,15 @@ ## The PREEMPTION_RANK expression is used in a case where preemption ## is the only option and all other negotiation ranks are equal. For ## example, if the job has no preference, it is usually preferable to -## preempt a job with a small ImageSize instead of a job with a large -## ImageSize. The default is to rank all preemptable matches the -## same. However, the negotiator will always prefer to match the job -## with an idle machine over a preemptable machine, if all other -## negotiation ranks are equal. -UWCS_PREEMPTION_RANK = (RemoteUserPrio * 1000000) - TARGET.ImageSize +## preempt a job that has just started instead of a job with a longer +## runtime, to cause less badput. The default is to rank all +## preemptable matches the same. However, the negotiator will always +## prefer to match the job with an idle machine over a preemptable +## machine, if all other negotiation ranks are equal. +UWCS_PREEMPTION_RANK = (RemoteUserPrio * 1000000) - ifThenElse(isUndefined(TotalJobRuntime), 0, TotalJobRuntime) + ##################################################################### ## This is a Configuration that will cause your Condor jobs to ## always run. This is intended for testing only. @@ -1064,7 +1044,7 @@ #HIGHPORT = 9700 #LOWPORT = 9600 -## If a daemon doesn't respond for too long, do you want go generate +## If a daemon does not respond for too long, do you want go generate ## a core file? This basically controls the type of the signal ## sent to the child process, and mostly affects the Condor Master #NOT_RESPONDING_WANT_CORE = False @@ -1086,7 +1066,7 @@ #MASTER, STARTD, SCHEDD, KBDD, COLLECTOR, NEGOTIATOR, EVENTD, \ #VIEW_SERVER, CONDOR_VIEW, VIEW_COLLECTOR, HAWKEYE, CREDD, HAD, \ #DBMSD, QUILL, JOB_ROUTER, ROOSTER, LEASEMANAGER, HDFS, SHARED_PORT, \ -#DEFRAG +#DEFRAG, GANGLIAD ## Where are the binaries for these daemons? @@ -1104,6 +1084,7 @@ SHARED_PORT = $(LIBEXEC)/condor_shared_port TRANSFERER = $(LIBEXEC)/condor_transferer DEFRAG = $(LIBEXEC)/condor_defrag +GANGLIAD = $(LIBEXEC)/condor_gangliad ## When the master starts up, it can place it's address (IP and port) ## into a file. This way, tools running on the local machine don't @@ -1143,7 +1124,7 @@ #MASTER_UPDATE_INTERVAL = 300 ## How often do you want the master to check the time stamps of the -## daemons it's running? If any daemons have been modified, the +## running daemons? If any daemons have been modified, the ## master restarts them. #MASTER_CHECK_NEW_EXEC_INTERVAL = 300 @@ -1178,13 +1159,21 @@ ##-------------------------------------------------------------------- ## condor_collector ##-------------------------------------------------------------------- -## Address to which Condor will send a weekly e-mail with output of -## condor_status. +## Address to which Condor will send a weekly e-mail with basic +## non-specific information about your pool. See +## http://htcondor.org/privacy.html for more information. +## To disable this behavior, uncomment the below line to +## explicitly set CONDOR_DEVELOPERS to NONE. #CONDOR_DEVELOPERS = condor-admin(a)cs.wisc.edu +#CONDOR_DEVELOPERS = NONE -## Global Collector to periodically advertise basic information about -## your pool. +## Global Collector to periodically advertise basic +## non-specific information about your pool. See +## http://htcondor.org/privacy.html for more information. +## To disable this behavior, uncomment the below line to +## explicitly set CONDOR_DEVELOPERS_COLLECTOR to NONE. #CONDOR_DEVELOPERS_COLLECTOR = condor.cs.wisc.edu +#CONDOR_DEVELOPERS_COLLECTOR = NONE ## When the collector starts up, it can place it's address (IP and port) ## into a file. This way, tools running on the local machine don't @@ -1194,7 +1183,14 @@ ## COLLECTOR_HOST, a useful technique for personal Condor installs. COLLECTOR_ADDRESS_FILE = $(LOG)/.collector_address +## +## Conventional HTCondor installations start up as root, and can thus +## set their own file descriptor limit. Upping the collector's doesn't +## hurt anything and ameliorates a common scalability problem. +## +# COLLECTOR_MAX_FILE_DESCRIPTORS = 10240 + ##-------------------------------------------------------------------- ## condor_negotiator ##-------------------------------------------------------------------- @@ -1244,15 +1240,13 @@ ## When a machine unclaimed, when should it run benchmarks? ## LastBenchmark is initialized to 0, so this expression says as soon -## as we're unclaimed, run the benchmarks. Thereafter, if we're -## unclaimed and it's been at least 4 hours since we ran the last +## as we're unclaimed, run the benchmarks. Thereafter, if we are +## unclaimed and it has been at least 4 hours since we ran the last ## benchmarks, run them again. The startd keeps a weighted average ## of the benchmark results to provide more accurate values. -## Note, if you don't want any benchmarks run at all, either comment -## RunBenchmarks out, or set it to "False". -BenchmarkTimer = (time() - LastBenchmark) -RunBenchmarks : (LastBenchmark == 0 ) || ($(BenchmarkTimer) >= (4 * $(HOUR))) -#RunBenchmarks : False +## Note, if you don't want any benchmarks run at all, set RunBenchmarks to "False". +#RunBenchmarks = False +#RunBenchmarks = (LastBenchmark == 0 ) || ((time() - LastBenchmark) >= (4 * $(HOUR))) ## When the startd does benchmarks, which set of benchmarks should we ## run? The default is the same as pre-7.5.6: MIPS and KFLOPS. @@ -1299,7 +1293,7 @@ ## entry into the ClassAd. In particular, ClassAds require double ## quotes (") around your strings. Numeric values can go in ## directly, as can boolean expressions. For example, if you wanted -## the startd to advertise its list of console devices, when it's +## the startd to advertise its list of console devices, when it is ## configured to run benchmarks, and how often it sends updates to ## the central manager, you'd have to define the following helper ## macro: @@ -1360,7 +1354,7 @@ ## Please read the section on "condor_startd Configuration File ## Macros" in the Condor Administrators Manual for a further ## discussion of this setting. Its use is not recommended. This -## must be an integer ("N" isn't a valid setting, that's just used to +## must be an integer ("N" is not a valid setting, that's just used to ## represent the default). #NUM_CPUS = N @@ -1368,7 +1362,7 @@ ## line out. You must restart the startd for this setting to take ## effect. If set to 0 or a negative number, it is ignored. ## By default, it is ignored. Otherwise, it must be a positive -## integer ("N" isn't a valid setting, that's just used to +## integer ("N" is not a valid setting, that's just used to ## represent the default). #MAX_NUM_CPUS = N @@ -1434,23 +1428,21 @@ ## report to your pool (if less than the total number of CPUs). This ## setting is only considered if the "type" settings described above ## are not in use. By default, all CPUs are reported. This setting -## must be an integer ("N" isn't a valid setting, that's just used to +## must be an integer ("N" is not a valid setting, that's just used to ## represent the default). #NUM_SLOTS = N ## How many of the slots the startd is representing should ## be "connected" to the console (in other words, notice when there's -## console activity)? This defaults to all slots (N in a -## machine with N CPUs). This must be an integer ("N" isn't a valid -## setting, that's just used to represent the default). -#SLOTS_CONNECTED_TO_CONSOLE = N +## console activity)? This defaults to all slots +#SLOTS_CONNECTED_TO_CONSOLE = $(NUM_CPUS) ## How many of the slots the startd is representing should ## be "connected" to the keyboard (for remote tty activity, as well -## as console activity). Defaults to 1. -#SLOTS_CONNECTED_TO_KEYBOARD = 1 +## as console activity). Defaults to all slots +#SLOTS_CONNECTED_TO_KEYBOARD = $(NUM_CPUS) -## If there are slots that aren't connected to the +## If there are slots that are not connected to the ## keyboard or the console (see the above two settings), the ## corresponding idle time reported will be the time since the startd ## was spawned, plus the value of this parameter. It defaults to 20 @@ -1531,7 +1523,7 @@ #JOB_START_DELAY = 2 ## How many concurrent sub-processes should the schedd spawn to handle -## queries? (Unix only) +## queries? (UNIX only) #SCHEDD_QUERY_WORKERS = 3 ## How often should the schedd send a keep alive message to any @@ -1580,6 +1572,14 @@ ## (Currently, these are periodic_hold, periodic_release, and periodic_remove.) #PERIODIC_EXPR_INTERVAL = 60 +## +## Conventional HTCondor installations start up as root, and can thus +## set their own file descriptor limit. Upping the schedd's limit has +## some minor downsides (larger buffers passed to select() and the like), +## but upping it makes a class of difficult-to-debug problems much rarer. +## +# SCHEDD_MAX_FILE_DESCRIPTORS = 4096 + ###### ## Queue management settings: ###### @@ -1654,10 +1654,10 @@ #STARTER_LOCAL_LOGGING = TRUE ## If the UID_DOMAIN settings match on both the execute and submit -## machines, but the UID of the user who submitted the job isn't in +## machines, but the UID of the user who submitted the job is not in ## the passwd file of the execute machine, the starter will normally ## exit with an error. Do you want the starter to just start up the -## job with the specified UID, even if it's not in the passwd file? +## job with the specified UID, even if it is not in the passwd file? #SOFT_UID_DOMAIN = FALSE ## honor the run_as_owner option from the condor submit file. @@ -1764,16 +1764,7 @@ ## Who should condor_preen send email to? #PREEN_ADMIN = $(CONDOR_ADMIN) -## What files should condor_preen leave in the spool directory? -VALID_SPOOL_FILES = job_queue.log, job_queue.log.tmp, history, \ - Accountant.log, Accountantnew.log, \ - local_univ_execute, .quillwritepassword, \ - .pgpass, \ - .schedd_address, .schedd_classad -## What files should condor_preen remove from the log directory? -INVALID_LOG_FILES = core - ##-------------------------------------------------------------------- ## Java parameters: ##-------------------------------------------------------------------- @@ -1836,8 +1827,8 @@ ## Another option is to use /tmp as the location of the GridManager log. ## -MAX_GRIDMANAGER_LOG = 1000000 -GRIDMANAGER_DEBUG = +#MAX_GRIDMANAGER_LOG = $(MAX_DEFAULT_LOG) +#GRIDMANAGER_DEBUG = GRIDMANAGER_LOG = $(LOG)/GridmanagerLog.$(USERNAME) GRIDMANAGER_LOCK = $(LOCK)/GridmanagerLock.$(USERNAME) @@ -1846,13 +1837,17 @@ ## Various other settings that the Condor-G can use. ##-------------------------------------------------------------------- -## The number of seconds between status update requests. You can make -## this short (5 seconds) if you want Condor to respond quickly to -## instances as they terminate, or you can make it long (300 seconds = 5 -## minutes) if you know your instances will run for awhile and don't -## mind delay between when they stop and when Condor responds to them -## stopping. -GRIDMANAGER_JOB_PROBE_INTERVAL = 300 +## Adjust how frequently the gridmanager checks the status of grid jobs. +## GRIDMANAGER_JOB_PROBE_INTERVAL sets the minimum time between checks +## for each job's status in seconds. For grid-types where each job's +## status must be checked individually (gt2, gt5, nordugrid, batch), +## GRIDMANAGER_JOB_PROBE_RATE sets the maximum number of status check +## requests the gridmanager will send to each remote resource per +## second. If enough jobs are submitted to a remote resource, the +## interval between checks for each job will increase so as not to +## exceed the set rate. +#GRIDMANAGER_JOB_PROBE_INTERVAL = 60 +#GRIDMANAGER_JOB_PROBE_RATE = 5 ## For grid-type gt2 jobs (pre-WS GRAM), limit the number of jobmanager ## processes the gridmanager will let run on the headnode. Letting too @@ -1919,7 +1914,7 @@ ## UNIX permissions 1777 (just like /tmp ) ## Another option is to use /tmp as the location of the CGAHP log. ## -MAX_C_GAHP_LOG = 1000000 +#MAX_C_GAHP_LOG = $(MAX_DEFAULT_LOG) #C_GAHP_LOG = $(LOG)/GridLogs/CGAHPLog.$(USERNAME) C_GAHP_LOG = /tmp/CGAHPLog.$(USERNAME) @@ -1996,11 +1991,11 @@ ## CredD daemon debugging log CREDD_LOG = $(LOG)/CredLog CREDD_DEBUG = D_FULLDEBUG -MAX_CREDD_LOG = 4000000 +#MAX_CREDD_LOG = $(MAX_DEFAULT_LOG) -## The credential owner submits the credential. This list specififies +## The credential owner submits the credential. This list specifies ## other user who are also permitted to see all credentials. Defaults -## to root on Unix systems, and Administrator on Windows systems. +## to root on UNIX systems, and Administrator on Windows systems. #CRED_SUPER_USERS = ## Credential storage location. This directory must exist @@ -2020,199 +2015,9 @@ ## credentials, at this interval. #CRED_CHECK_INTERVAL = 60 -## -##-------------------------------------------------------------------- -## Stork data placement server -##-------------------------------------------------------------------- -## Where is the Stork binary installed? -STORK = $(SBIN)/stork_server -## When Stork starts up, it can place it's address (IP and port) -## into a file. This way, tools running on the local machine don't -## need an additional "-n host:port" command line option. This -## feature can be turned off by commenting out this setting. -STORK_ADDRESS_FILE = $(LOG)/.stork_address - -## Specify a remote Stork server here, -#STORK_HOST = $(CONDOR_HOST):$(STORK_PORT) - -## STORK_LOG_BASE specifies the basename for heritage Stork log files. -## Stork uses this macro to create the following output log files: -## $(STORK_LOG_BASE): Stork server job queue classad collection -## journal file. -## $(STORK_LOG_BASE).history: Used to track completed jobs. -## $(STORK_LOG_BASE).user_log: User level log, also used by DAGMan. -STORK_LOG_BASE = $(LOG)/Stork - -## Modern Condor DaemonCore logging feature. -STORK_LOG = $(LOG)/StorkLog -STORK_DEBUG = D_FULLDEBUG -MAX_STORK_LOG = 4000000 - -## Stork startup arguments -## Start Stork on a well-known port. Uncomment to to simplify -## connecting to a remote Stork. Note: that this interface may change -## in a future release. -#STORK_PORT = 34048 -STORK_PORT = 9621 -STORK_ARGS = -p $(STORK_PORT) -f -Serverlog $(STORK_LOG_BASE) - -## Stork environment. Stork modules may require external programs and -## shared object libraries. These are located using the PATH and -## LD_LIBRARY_PATH environments. Further, some modules may require -## further specific environments. By default, Stork inherits a full -## environment when invoked from condor_master or the shell. If the -## default environment is not adequate for all Stork modules, specify -## a replacement environment here. This environment will be set by -## condor_master before starting Stork, but does not apply if Stork is -## started directly from the command line. -#STORK_ENVIRONMENT = TMP=/tmp;CONDOR_CONFIG=/special/config;PATH=/lib - -## Limits the number of concurrent data placements handled by Stork. -#STORK_MAX_NUM_JOBS = 5 - -## Limits the number of retries for a failed data placement. -#STORK_MAX_RETRY = 5 - -## Limits the run time for a data placement job, after which the -## placement is considered failed. -#STORK_MAXDELAY_INMINUTES = 10 - -## Temporary credential storage directory used by Stork. -#STORK_TMP_CRED_DIR = /tmp - -## Directory containing Stork modules. -#STORK_MODULE_DIR = $(LIBEXEC) - ## ##-------------------------------------------------------------------- -## Quill Job Queue Mirroring Server -##-------------------------------------------------------------------- -## Where is the Quill binary installed and what arguments should be passed? -QUILL = $(SBIN)/condor_quill -#QUILL_ARGS = - -# Where is the log file for the quill daemon? -QUILL_LOG = $(LOG)/QuillLog - -# The identification and location of the quill daemon for local clients. -QUILL_ADDRESS_FILE = $(LOG)/.quill_address - -# If this is set to true, then the rest of the QUILL arguments must be defined -# for quill to function. If it is False or left undefined, then quill will not -# be consulted by either the scheduler or the tools, but in the case of a -# remote quill query where the local client has quill turned off, but the -# remote client has quill turned on, things will still function normally. -#QUILL_ENABLED = TRUE - -# -# If Quill is enabled, by default it will only mirror the current job -# queue into the database. For historical jobs, and classads from other -# sources, the SQL Log must be enabled. -#QUILL_USE_SQL_LOG=FALSE - -# -# The SQL Log can be enabled on a per-daemon basis. For example, to collect -# historical job information, but store no information about execute machines, -# uncomment these two lines -#QUILL_USE_SQL_LOG = FALSE -#SCHEDD.QUILL_USE_SQL_LOG = TRUE - -# This will be the name of a quill daemon using this config file. This name -# should not conflict with any other quill name--or schedd name. -#QUILL_NAME = quill(a)postgresql-server.machine.com - -# The Postgreql server requires usernames that can manipulate tables. This will -# be the username associated with this instance of the quill daemon mirroring -# a schedd's job queue. Each quill daemon must have a unique username -# associated with it otherwise multiple quill daemons will corrupt the data -# held under an identical user name. -#QUILL_DB_NAME = name_of_db - -# The required password for the DB user which quill will use to read -# information from the database about the queue. -#QUILL_DB_QUERY_PASSWORD = foobar - -# What kind of database server is this? -# For now, only PGSQL is supported -#QUILL_DB_TYPE = PGSQL - -# The machine and port of the postgres server. -# Although this says IP Addr, it can be a DNS name. -# It must match whatever format you used for the .pgpass file, however -#QUILL_DB_IP_ADDR = machine.domain.com:5432 - -# The login to use to attach to the database for updating information. -# There should be an entry in file $SPOOL/.pgpass that gives the password -# for this login id. -#QUILL_DB_USER = quillwriter - -# Polling period, in seconds, for when quill reads transactions out of the -# schedd's job queue log file and puts them into the database. -#QUILL_POLLING_PERIOD = 10 - -# Allows or disallows a remote query to the quill daemon and database -# which is reading this log file. Defaults to true. -#QUILL_IS_REMOTELY_QUERYABLE = TRUE - -# Add debugging flags to here if you need to debug quill for some reason. -#QUILL_DEBUG = D_FULLDEBUG - -# Number of seconds the master should wait for the Quill daemon to respond -# before killing it. This number might need to be increased for very -# large logfiles. -# The default is 3600 (one hour), but kicking it up to a few hours won't hurt -#QUILL_NOT_RESPONDING_TIMEOUT = 3600 - -# Should Quill hold open a database connection to the DBMSD? -# Each open connection consumes resources at the server, so large pools -# (100 or more machines) should set this variable to FALSE. Note the -# default is TRUE. -#QUILL_MAINTAIN_DB_CONN = TRUE - -## -##-------------------------------------------------------------------- -## Database Management Daemon settings -##-------------------------------------------------------------------- -## Where is the DBMSd binary installed and what arguments should be passed? -DBMSD = $(SBIN)/condor_dbmsd -DBMSD_ARGS = -f - -# Where is the log file for the quill daemon? -DBMSD_LOG = $(LOG)/DbmsdLog - -# Interval between consecutive purging calls (in seconds) -#DATABASE_PURGE_INTERVAL = 86400 - -# Interval between consecutive database reindexing operations -# This is only used when dbtype = PGSQL -#DATABASE_REINDEX_INTERVAL = 86400 - -# Number of days before purging resource classad history -# This includes things like machine ads, daemon ads, submitters -#QUILL_RESOURCE_HISTORY_DURATION = 7 - -# Number of days before purging job run information -# This includes job events, file transfers, matchmaker matches, etc -# This does NOT include the final job ad. condor_history does not need -# any of this information to work. -#QUILL_RUN_HISTORY_DURATION = 7 - -# Number of days before purging job classad history -# This is the information needed to run condor_history -#QUILL_JOB_HISTORY_DURATION = 3650 - -# DB size threshold for warning the condor administrator. This is checked -# after every purge. The size is given in gigabytes. -#QUILL_DBSIZE_LIMIT = 20 - -# Number of seconds the master should wait for the DBMSD to respond before -# killing it. This number might need to be increased for very large databases -# The default is 3600 (one hour). -#DBMSD_NOT_RESPONDING_TIMEOUT = 3600 - -## -##-------------------------------------------------------------------- ## VM Universe Parameters ##-------------------------------------------------------------------- ## Where is the Condor VM-GAHP installed? (Required) @@ -2226,7 +2031,7 @@ ## However, on Windows machine you must always define VM_GAHP_LOG. # VM_GAHP_LOG = $(LOG)/VMGahpLog -MAX_VM_GAHP_LOG = 1000000 +#MAX_VM_GAHP_LOG = $(MAX_DEFAULT_LOG) #VM_GAHP_DEBUG = D_FULLDEBUG ## What kind of virtual machine program will be used for @@ -2293,7 +2098,7 @@ ## will occur. ## For VMware, we send SIGSTOP to a process for VM in order to ## stop the VM temporarily and send SIGCONT to resume the VM. -## For Xen, we pause CPU. Pausing CPU doesn't save the memory of VM +## For Xen, we pause CPU. Pausing CPU does not save the memory of VM ## into a file. It only stops the execution of a VM temporarily. #VM_SOFT_SUSPEND = TRUE @@ -2305,7 +2110,7 @@ ## Notice: In VMware VM universe, "nobody" can not create a VMware VM. ## So we need to define "VM_UNIV_NOBODY_USER" with a regular user. ## For VMware, the user defined in "VM_UNIV_NOBODY_USER" must have a -## home directory. So SOFT_UID_DOMAIN doesn't work for VMware VM universe job. +## home directory. So SOFT_UID_DOMAIN does not work for VMware VM universe job. ## If neither "VM_UNIV_NOBODY_USER" nor "SLOTx_VMUSER"/"SLOTx_USER" is defined, ## VMware VM universe job will run as "condor" instead of "nobody". ## As a result, the preference of local users for a VMware VM universe job @@ -2377,38 +2182,7 @@ ## a disk image #XEN_BOOTLOADER = /usr/bin/pygrub -## -##-------------------------------------------------------------------- -## condor_lease_manager lease manager daemon -##-------------------------------------------------------------------- -## Where is the LeaseManager binary installed? -LeaseManager = $(SBIN)/condor_lease_manager -# Turn on the lease manager -#DAEMON_LIST = $(DAEMON_LIST), LeaseManager - -# The identification and location of the lease manager for local clients. -LeaseManger_ADDRESS_FILE = $(LOG)/.lease_manager_address - -## LeaseManager startup arguments -#LeaseManager_ARGS = -local-name generic - -## LeaseManager daemon debugging log -LeaseManager_LOG = $(LOG)/LeaseManagerLog -LeaseManager_DEBUG = D_FULLDEBUG -MAX_LeaseManager_LOG = 1000000 - -# Basic parameters -LeaseManager.GETADS_INTERVAL = 60 -LeaseManager.UPDATE_INTERVAL = 300 -LeaseManager.PRUNE_INTERVAL = 60 -LeaseManager.DEBUG_ADS = False - -LeaseManager.CLASSAD_LOG = $(SPOOL)/LeaseManagerState -#LeaseManager.QUERY_ADTYPE = Any -#LeaseManager.QUERY_CONSTRAINTS = MyType == "SomeType" -#LeaseManager.QUERY_CONSTRAINTS = TargetType == "SomeType" - ## ##-------------------------------------------------------------------- ## KBDD - keyboard activity detection daemon @@ -2498,16 +2272,16 @@ ## The host and port for hadoop's name node. If this machine is the ## name node (see HDFS_SERVICES) then the specified port will be used ## to run name node. -HDFS_NAMENODE = hdfs://example.com:9000 -HDFS_NAMENODE_WEB = example.com:8000 +#HDFS_NAMENODE = hdfs://example.com:9000 +#HDFS_NAMENODE_WEB = example.com:8000 -HDFS_BACKUPNODE = hdfs://example.com:50100 -HDFS_BACKUPNODE_WEB = example.com:50105 +#HDFS_BACKUPNODE = hdfs://example.com:50100 +#HDFS_BACKUPNODE_WEB = example.com:50105 ## You need to pick one machine as name node by setting this parameter ## to HDFS_NAMENODE. The remaining machines in a storage cluster will ## act as data nodes (HDFS_DATANODE). -HDFS_NODETYPE = HDFS_DATANODE +#HDFS_NODETYPE = HDFS_DATANODE ## If machine is selected to be NameNode then by a role should defined. ## If it selected to be DataNode then this parameter is ignored. @@ -2517,7 +2291,7 @@ ## creating a backup of the namespace. Currently the NameNode ## supports one Backup node at a time. ## CHECKPOINT: Periodically creates checkpoints of the namespace. -HDFS_NAMENODE_ROLE = ACTIVE +#HDFS_NAMENODE_ROLE = ACTIVE ## The two set of directories that are required by HDFS are for name ## node (HDFS_NAMENODE_DIR) and data node (HDFS_DATANODE_DIR). The @@ -2525,8 +2299,8 @@ ## name node service and is used to store critical meta data for ## files. The data node needs its directory to store file blocks and ## their replicas. -HDFS_NAMENODE_DIR = /tmp/hadoop_name -HDFS_DATANODE_DIR = /scratch/tmp/hadoop_data +#HDFS_NAMENODE_DIR = /tmp/hadoop_name +#HDFS_DATANODE_DIR = /scratch/tmp/hadoop_data ## Unlike name node address settings (HDFS_NAMENODE), that needs to be ## well known across the storage cluster, data node can run on any Modified: trunk/dports/science/htcondor/files/patch-build-cmake-CondorPackageConfig.cmake.diff =================================================================== --- trunk/dports/science/htcondor/files/patch-build-cmake-CondorPackageConfig.cmake.diff 2015-10-01 02:29:01 UTC (rev 140718) +++ trunk/dports/science/htcondor/files/patch-build-cmake-CondorPackageConfig.cmake.diff 2015-10-01 04:00:22 UTC (rev 140719) @@ -1,6 +1,6 @@ ---- build/cmake/CondorPackageConfig.cmake.orig 2013-05-20 11:00:54.000000000 -0700 -+++ build/cmake/CondorPackageConfig.cmake 2013-05-20 11:01:42.000000000 -0700 -@@ -116,7 +116,7 @@ +--- build/cmake/CondorPackageConfig.cmake ++++ build/cmake/CondorPackageConfig.cmake +@@ -118,7 +118,7 @@ set( C_LIB32 lib) set( C_LIBEXEC libexec ) set( C_SBIN sbin) Modified: trunk/dports/science/htcondor/files/patch-src-condor_scripts-macosx_rewrite_libs.diff =================================================================== --- trunk/dports/science/htcondor/files/patch-src-condor_scripts-macosx_rewrite_libs.diff 2015-10-01 02:29:01 UTC (rev 140718) +++ trunk/dports/science/htcondor/files/patch-src-condor_scripts-macosx_rewrite_libs.diff 2015-10-01 04:00:22 UTC (rev 140719) @@ -1,5 +1,5 @@ ---- src/condor_scripts/macosx_rewrite_libs.orig 2013-06-07 00:27:47.000000000 -0700 -+++ src/condor_scripts/macosx_rewrite_libs 2013-06-07 00:27:52.000000000 -0700 +--- src/condor_scripts/macosx_rewrite_libs ++++ src/condor_scripts/macosx_rewrite_libs @@ -1,43 +1 @@ #!/bin/sh - Modified: trunk/dports/science/htcondor/files/patch-src-condor_utils-condor_config.cpp.diff =================================================================== --- trunk/dports/science/htcondor/files/patch-src-condor_utils-condor_config.cpp.diff 2015-10-01 02:29:01 UTC (rev 140718) +++ trunk/dports/science/htcondor/files/patch-src-condor_utils-condor_config.cpp.diff 2015-10-01 04:00:22 UTC (rev 140719) @@ -1,5 +1,5 @@ ---- src/condor_utils/condor_config.cpp.orig 2013-05-16 14:43:02.000000000 -0700 -+++ src/condor_utils/condor_config.cpp 2013-05-16 14:45:12.000000000 -0700 +--- src/condor_utils/condor_config.cpp ++++ src/condor_utils/condor_config.cpp @@ -35,7 +35,7 @@ doesn't exist, we look in the following locations: @@ -9,28 +9,28 @@ 3) /usr/local/etc/ 4) ~condor/ -@@ -576,7 +576,7 @@ +@@ -916,7 +916,7 @@ real_config(const char* host, int wantsQuiet, int config_options) fprintf(stderr,"\nNeither the environment variable %s_CONFIG,\n", myDistro->GetUc() ); # if defined UNIX -- fprintf(stderr,"/etc/%s/, nor ~%s/ contain a %s_config source.\n", -+ fprintf(stderr,"@prefix@/etc/%s/, nor ~%s/ contain a %s_config source.\n", +- fprintf(stderr,"/etc/%s/, /usr/local/etc/, nor ~%s/ contain a %s_config source.\n", ++ fprintf(stderr,"@prefix@/etc/%s/, /usr/local/etc/, nor ~%s/ contain a %s_config source.\n", myDistro->Get(), myDistro->Get(), myDistro->Get() ); # elif defined WIN32 fprintf(stderr,"nor the registry contains a %s_config source.\n", myDistro->Get() ); -@@ -586,7 +586,7 @@ +@@ -926,7 +926,7 @@ real_config(const char* host, int wantsQuiet, int config_options) fprintf( stderr,"Either set %s_CONFIG to point to a valid config " "source,\n", myDistro->GetUc() ); # if defined UNIX -- fprintf( stderr,"or put a \"%s_config\" file in /etc/%s or ~%s/\n", -+ fprintf( stderr,"or put a \"%s_config\" file in @prefix@/etc/%s or ~%s/\n", +- fprintf( stderr,"or put a \"%s_config\" file in /etc/%s/ /usr/local/etc/ or ~%s/\n", ++ fprintf( stderr,"or put a \"%s_config\" file in @prefix@/etc/%s/ /usr/local/etc/ or ~%s/\n", myDistro->Get(), myDistro->Get(), myDistro->Get() ); # elif defined WIN32 fprintf( stderr,"or put a \"%s_config\" source in the registry at:\n" -@@ -1060,8 +1060,8 @@ - formatstr( locations[0], "%s/.%s/%s", pw->pw_dir, myDistro->Get(), - file_name ); - } +@@ -1477,8 +1477,8 @@ find_file(const char *env_name, const char *file_name, int config_options) + // 1) $HOME/.condor/condor_config + // $HOME/.condor/condor_config was added for BOSCO and never used, We are removing it in 8.3.1, but may put it back if users complain. + //find_user_file(locations[0], file_name, false); - // 2) /etc/condor/condor_config - locations[1].formatstr( "/etc/%s/%s", myDistro->Get(), file_name ); + // 2) @prefix@/etc/condor/condor_config Modified: trunk/dports/science/htcondor/files/patch-src-python-bindings-CMakeLists.txt.diff =================================================================== --- trunk/dports/science/htcondor/files/patch-src-python-bindings-CMakeLists.txt.diff 2015-10-01 02:29:01 UTC (rev 140718) +++ trunk/dports/science/htcondor/files/patch-src-python-bindings-CMakeLists.txt.diff 2015-10-01 04:00:22 UTC (rev 140719) @@ -1,14 +1,14 @@ ---- src/python-bindings/CMakeLists.txt.orig 2014-07-17 11:44:13.000000000 -0700 -+++ src/python-bindings/CMakeLists.txt 2014-07-17 11:44:25.000000000 -0700 -@@ -11,9 +11,9 @@ - set ( CMAKE_LIBRARY_PATH CMAKE_LIBRARY_PATH_ORIG) +--- src/python-bindings/CMakeLists.txt ++++ src/python-bindings/CMakeLists.txt +@@ -101,9 +101,9 @@ else() + set ( CMAKE_LIBRARY_PATH CMAKE_LIBRARY_PATH_ORIG) - if (PROPER AND "${PYTHON_VERSION_MAJOR}" MATCHES "3") -- set ( PYTHON_BOOST_LIB boost_python3 ) -+ set ( PYTHON_BOOST_LIB boost_python3-mt ) - else() -- set ( PYTHON_BOOST_LIB boost_python ) -+ set ( PYTHON_BOOST_LIB boost_python-mt ) - endif() + if (PROPER AND "${PYTHON_VERSION_MAJOR}" MATCHES "3") +- set ( PYTHON_BOOST_LIB boost_python3 ) ++ set ( PYTHON_BOOST_LIB boost_python3-mt ) + else() +- set ( PYTHON_BOOST_LIB boost_python ) ++ set ( PYTHON_BOOST_LIB boost_python-mt ) + endif() - include_directories(${PYTHON_INCLUDE_DIRS} ${BOOST_INCLUDE}) + include_directories(${PYTHON_INCLUDE_DIRS} ${BOOST_INCLUDE})

1 0

[140718] trunk/dports/lang/g95/Portfile
by dstrubbe＠macports.org 01 Oct '15

01 Oct '15

Revision: 140718 https://trac.macports.org/changeset/140718 Author: dstrubbe(a)macports.org Date: 2015-09-30 19:29:01 -0700 (Wed, 30 Sep 2015) Log Message: ----------- g95: add livecheck. Modified Paths: -------------- trunk/dports/lang/g95/Portfile Modified: trunk/dports/lang/g95/Portfile =================================================================== --- trunk/dports/lang/g95/Portfile 2015-09-30 21:58:10 UTC (rev 140717) +++ trunk/dports/lang/g95/Portfile 2015-10-01 02:29:01 UTC (rev 140718) @@ -178,3 +178,7 @@ patchfiles-delete patch-lang.opt.diff patch-darwin.h.diff patchfiles-append patch-host-darwin.c.diff patch-darwin-fallback.c.diff } + +livecheck.type regex +livecheck.url http://g95.org/downloads.shtml +livecheck.regex Stable version (\[0-9.\]+)

1 0