September 2015 - macports-changes - lists.macosforge.org

[140717] trunk/dports/science
by eborisch＠macports.org 30 Sep '15

30 Sep '15

Revision: 140717 https://trac.macports.org/changeset/140717 Author: eborisch(a)macports.org Date: 2015-09-30 14:58:10 -0700 (Wed, 30 Sep 2015) Log Message: ----------- OpenCoarrays: new port. Added Paths: ----------- trunk/dports/science/OpenCoarrays/ trunk/dports/science/OpenCoarrays/Portfile Added: trunk/dports/science/OpenCoarrays/Portfile =================================================================== --- trunk/dports/science/OpenCoarrays/Portfile (rev 0) +++ trunk/dports/science/OpenCoarrays/Portfile 2015-09-30 21:58:10 UTC (rev 140717) @@ -0,0 +1,64 @@ +# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4 +# $Id$ + +PortSystem 1.0 +PortGroup cmake 1.0 +PortGroup github 1.0 +PortGroup mpi 1.0 + +github.setup sourceryinstitute opencoarrays v1.0.0 +name OpenCoarrays +version 1.0.0 +categories science parallel devel +platforms darwin +license BSD +maintainers gmail.com:fanfarillo.gcc + +description Library for multi-image coarray Fortran suppport +long_description OpenCoarrays is an open-source software project \ + for developing, porting and tuning transport \ + layers that support coarray Fortran compilers. \ + We target compilers that conform to the coarray \ + parallel programming feature set specified in the \ + Fortran 2008 standard. We also support several \ + features proposed for Fortran 2015 in the draft \ + Technical Specification 'TS18508 Additional \ + Parallel Features in Fortran'. +homepage http://opencoarrays.org + +mpi.setup require require_fortran \ + -gcc44 -gcc45 -gcc46 -gcc47 -gcc48 -gcc49 \ + -dragonegg -clang -llvm -fortran +universal_variant no +if {![variant_isset gcc5] && ![variant_isset gcc6]} { + default_variants +gcc5 +} + +checksums \ + rmd160 96092add58f18eb1703bea988762830c4a2058d5 \ + sha256 a02703607f7d02537d36126bcba99d88731a0eb615c581487e93720e598bb72a + +#patchfiles tests-compiler.patch + +cmake.out_of_source yes + +post-patch { + reinplace "s|mpicc|${prefix}/bin/mpicc-${mpi.name}|g" \ + src/make.inc src/mpi/Makefile src/tests/unit/simple/CMakeLists.txt +} + +# Required to run the test phase. +pre-configure { + configure.args-append \ + -DMPIEXEC=${prefix}/bin/${mpi.exec} \ + -DMPI_C_COMPILER=${prefix}/bin/mpicc-${mpi.name} \ + -DMPI_Fortran_COMPILER=${prefix}/bin/mpif90-${mpi.name} +} + +#test.run yes +#test.target test + +post-destroot { + move ${destroot}${prefix}/mod/opencoarrays.mod \ + ${destroot}${prefix}/include +} Property changes on: trunk/dports/science/OpenCoarrays/Portfile ___________________________________________________________________ Added: svn:keywords + Id Added: svn:eol-style + native

1 0

[MacPorts] Migration modified
by MacPorts 30 Sep '15

30 Sep '15

Page "Migration" was changed by dstrubbe(a)macports.org Diff URL: <https://trac.macports.org/wiki/Migration?action=diff&version=86> Revision 86 Changes: -------8<------8<------8<------8<------8<------8<------8<------8<-------- Index: Migration ========================================================================= --- Migration (version: 85) +++ Migration (version: 86) @@ -19,7 +19,7 @@ [https://www.macports.org/install.php install the base MacPorts system] for your new platform, either from the appropriate installer or from source. - a. **Update macports.conf.** If your macports.conf contains uncommented settings for universal_archs or build_arch, you will likely want to update them, since unlike earlier OS versions, the compiler on Snow Leopard and later will build for x86_64 by default on systems that support it. The default values will be fine for almost all users, so unless you know you need something different, just comment out these two lines. Several other settings in macports.conf have changed their defaults over the years. Take a moment to compare each line of your macports.conf with the corresponding line in macports.conf.default in the same directory. Unless you know a reason why a line in your settings file should be different from the defaults, adopt the line from the defaults file. + a. **Update macports.conf.** If your {{{macports.conf}}} (typically at {{{ /opt/local/etc/macports/macports.conf}}}) contains uncommented settings for {{{universal_archs}}} or {{{build_arch}}}, you will likely want to update them, since unlike earlier OS versions, the compiler on Snow Leopard and later will build for x86_64 by default on systems that support it. The default values will be fine for almost all users, so unless you know you need something different, just comment out these two lines. Several other settings in {{{macports.conf}}} have changed their defaults over the years. Take a moment to compare each line of your {{{macports.conf}}} with the corresponding line in {{{macports.conf.default}}} in the same directory. Unless you know a reason why a line in your settings file should be different from the defaults, adopt the line from the defaults file. 1. [=#ports] **Reinstall ports.** To reinstall your ports: a. Save the list of installed ports: {{{ -------8<------8<------8<------8<------8<------8<------8<------8<-------- -- Page URL: <https://trac.macports.org/wiki/Migration> MacPorts <https://www.macports.org/> Ports system for OS X This is an automated message. Someone added your email address to be notified of changes on 'Migration' page. If it was not you, please report to .

1 0

[140716] trunk/dports/sysutils/ddrescue/Portfile
by cal＠macports.org 30 Sep '15

30 Sep '15

Revision: 140716 https://trac.macports.org/changeset/140716 Author: cal(a)macports.org Date: 2015-09-30 14:21:24 -0700 (Wed, 30 Sep 2015) Log Message: ----------- ddrescue: The license changed back to GPL-2+ in 2014 Modified Paths: -------------- trunk/dports/sysutils/ddrescue/Portfile Modified: trunk/dports/sysutils/ddrescue/Portfile =================================================================== --- trunk/dports/sysutils/ddrescue/Portfile 2015-09-30 21:20:35 UTC (rev 140715) +++ trunk/dports/sysutils/ddrescue/Portfile 2015-09-30 21:21:24 UTC (rev 140716) @@ -7,7 +7,7 @@ version 1.20 categories sysutils platforms darwin -license GPL-3+ +license GPL-2+ maintainers raimue description GNU ddrescue is a data recovery tool.

1 0

[140715] trunk/dports/sysutils/ddrescue/Portfile
by cal＠macports.org 30 Sep '15

30 Sep '15

Revision: 140715 https://trac.macports.org/changeset/140715 Author: cal(a)macports.org Date: 2015-09-30 14:20:35 -0700 (Wed, 30 Sep 2015) Log Message: ----------- ddrescue: update to 1.20, with maintainer approval Switch to use_lzip yes, drop explicit install-man target since it's now a dependency of the install target. Modified Paths: -------------- trunk/dports/sysutils/ddrescue/Portfile Modified: trunk/dports/sysutils/ddrescue/Portfile =================================================================== --- trunk/dports/sysutils/ddrescue/Portfile 2015-09-30 21:19:35 UTC (rev 140714) +++ trunk/dports/sysutils/ddrescue/Portfile 2015-09-30 21:20:35 UTC (rev 140715) @@ -1,9 +1,10 @@ # $Id$ PortSystem 1.0 +PortGroup gnu_info 1.0 name ddrescue -version 1.19 +version 1.20 categories sysutils platforms darwin license GPL-3+ @@ -18,14 +19,9 @@ homepage http://www.gnu.org/software/ddrescue/ddrescue.html master_sites gnu:ddrescue -# lzip archive -depends_extract port:lzip -extract.suffix .tar.lz -extract.cmd ${prefix}/bin/lzip +use_lzip yes -checksums rmd160 31e2c4be6fad160271a6cc546e8944487b4d8d15 \ - sha256 ed8d0c9d9aac80a9110e9cb0d0a91a7390d3bf9f816b67a62ca4eb140f4747b8 +checksums rmd160 020895b8569f34c92983115b41adf49968708faa \ + sha256 83f993b1a167865d76e92e7c1406436331a8b3b337b9868fd6ca1ec2c45460bd configure.args CXX=${configure.cxx} - -destroot.target-append install-man

1 0

[140714] trunk/dports/_resources/port1.0/group/gnu_info-1.0.tcl
by cal＠macports.org 30 Sep '15

30 Sep '15

Revision: 140714 https://trac.macports.org/changeset/140714 Author: cal(a)macports.org Date: 2015-09-30 14:19:35 -0700 (Wed, 30 Sep 2015) Log Message: ----------- Add gnu_info group to run install-info on activate GNU info requires running install-info $infofile $prefix/share/info/dir on activation and install-info --delete $infofile $prefix/share/info/dir on deactivation. Let's have a PortGroup to support that. We should really have a generic trigger mechanism to get this right rather than doing it manually for each port, especially since we don't have a lint check that warns you if you forget it. Added Paths: ----------- trunk/dports/_resources/port1.0/group/gnu_info-1.0.tcl Added: trunk/dports/_resources/port1.0/group/gnu_info-1.0.tcl =================================================================== --- trunk/dports/_resources/port1.0/group/gnu_info-1.0.tcl (rev 0) +++ trunk/dports/_resources/port1.0/group/gnu_info-1.0.tcl 2015-09-30 21:19:35 UTC (rev 140714) @@ -0,0 +1,109 @@ +# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4 +# $Id$ +# +# Copyright (c) 2015 The MacPorts Project +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# 3. Neither the name of The MacPorts Project nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# +# Usage: +# PortGroup gnu_info 1.0 +# +# In the default case of your package installing a single ${subport}.info file +# in ${prefix}/share/info, you don't need to do anything. +# +# If your package installs a single info file in the standard directory, but +# its name does not equal your port's name (e.g. when the port has been renamed +# due to a naming conflict), set gnu_info.name: +# +# gnu_info.name ddrescue +# +# If your package installs more than a single info file, set the gnu_info.files +# property: +# +# gnu_info.files ${gnu_info.path}/${name}.info ${gnu_info.path}/${name}-dev.info +# +# If your package installs info files in a non-standard path, you may want to +# set gnu_info.dir to this alternative path. Note that the dir file will still +# be in the standard location ${prefix}/share/info/dir; you can control this +# property using gnu_info.dirfile. +# +# gnu_info.dir ${prefix}/share/info/${name} +# +# If you also want to change the location of the GNU info dir file, set +# gnu_info.dirfile. The default should, however, be fine for all use cases. +# +# gnu_info.dirfile ${prefix}/share/info/dir +# +# If your package installs info files in more than one directory, you will have +# to use gnu_info.files with multiple different paths. + +# The name of the info file the port installs in in ${gnu_info.dir}. Defaults +# to the name of the port. +options gnu_info.name +default gnu_info.name {${subport}} + +# List of GNU info files installed by this port. Use absolute paths only. +# Defaults to ${gnu_info.dir}/${gnu_info.name}.info +options gnu_info.files +default gnu_info.files {[list ${gnu_info.dir}/${gnu_info.name}.info]} + +# Directory that contains the installed info file, defaults to +# ${prefix}/share/info. This is only used in the default value of +# gnu_info.files, so if you set that, this property has no effect. Note that +# this property does NOT affect the location of the GNU info dir file. That is +# instead controlled by gnu_info.dirfile. +options gnu_info.dir +default gnu_info.dir {${prefix}/share/info} + +# Absolute path of the GNU info dir file. Defaults to ${prefix}/share/info/dir. +# You shouldn't have to change this. +options gnu_info.dirfile +default gnu_info.dirfile {${prefix}/share/info/dir} + +# Absolute path to the install-info binary to be used for installation of info +# files. Defaults to ${prefix}/bin/install-info. +options gnu_info.install_info +default gnu_info.install_info {${prefix}/bin/install-info} + +# Add the necessary dependency for activation and de-activation +depends_run-delete port:texinfo +depends_run-append port:texinfo + +post-activate { + foreach infofile ${gnu_info.files} { + ui_debug "Registering GNU info file ${infofile} in ${gnu_info.dirfile} using ${gnu_info.install_info}" + system "${gnu_info.install_info} ${infofile} ${gnu_info.dirfile}" + } +} + +pre-deactivate { + foreach infofile ${gnu_info.files} { + ui_debug "Unregistering GNU info file ${infofile} in ${gnu_info.dirfile} using ${gnu_info.install_info}" + system "${gnu_info.install_info} --delete ${infofile} ${gnu_info.dirfile}" + } +} Property changes on: trunk/dports/_resources/port1.0/group/gnu_info-1.0.tcl ___________________________________________________________________ Added: svn:keywords + Id Added: svn:eol-style + native

1 0

[140713] trunk/dports/gnome/gstreamer1-gst-plugins-bad/Portfile
by devans＠macports.org 30 Sep '15

30 Sep '15

Revision: 140713 https://trac.macports.org/changeset/140713 Author: devans(a)macports.org Date: 2015-09-30 12:31:53 -0700 (Wed, 30 Sep 2015) Log Message: ----------- gstreamer1-gst-plugins-bad: disable apple_media plugin on 10.9 or earlier due to use of API only available on 10.10+. Modified Paths: -------------- trunk/dports/gnome/gstreamer1-gst-plugins-bad/Portfile Modified: trunk/dports/gnome/gstreamer1-gst-plugins-bad/Portfile =================================================================== --- trunk/dports/gnome/gstreamer1-gst-plugins-bad/Portfile 2015-09-30 19:17:08 UTC (rev 140712) +++ trunk/dports/gnome/gstreamer1-gst-plugins-bad/Portfile 2015-09-30 19:31:53 UTC (rev 140713) @@ -107,8 +107,9 @@ # # port:soundtouch (fails on autoreconf on darwin 8 & 9, see #27533) disable soundtouch on these platforms -# plugin applemedia (Apple video) only builds on darwin 13 and later due to use of -# constant kVTCompressionPropertyKey_RealTime introduced in OSX 10.9 +# gl cocoa build continues to fail due to use of API not available on darwin 10 or earlier +# plugin applemedia (Apple video) now only builds on darwin 14 and later due to use of +# constant AVQueuedSampleBufferRenderingStatusFailed introduced in OSX 10.10 # platform darwin { @@ -116,22 +117,15 @@ depends_lib-delete port:soundtouch configure.args-append --disable-soundtouch --disable-opengl } - if {${os.major} < 13} { + if {${os.major} < 11 } { + configure.args-append --disable-cocoa + } + if {${os.major} < 14} { configure.args-append --disable-apple_media } } # -# applemedia video plugin uses CoreMedia which is not available on darwin 10 or earlier -# gl cocoa build continues to fail due to use of API not available on darwin 10 or earlier -# - -if { ${os.major} < 11 } { - configure.args-append --disable-apple_media \ - --disable-cocoa -} - -# # X11 is only used for examples that are not installed # so just disable examples and drop the deprecated +no_x11 variant #

1 0

[140712] trunk/dports/gnome/gstreamer1
by devans＠macports.org 30 Sep '15

30 Sep '15

Revision: 140712 https://trac.macports.org/changeset/140712 Author: devans(a)macports.org Date: 2015-09-30 12:17:08 -0700 (Wed, 30 Sep 2015) Log Message: ----------- gstreamer1: include sys/socket.h as required, addresses build issue on 10.8 and earlier (#49012). Modified Paths: -------------- trunk/dports/gnome/gstreamer1/Portfile Added Paths: ----------- trunk/dports/gnome/gstreamer1/files/ trunk/dports/gnome/gstreamer1/files/patch-struct-sockadr.diff Modified: trunk/dports/gnome/gstreamer1/Portfile =================================================================== --- trunk/dports/gnome/gstreamer1/Portfile 2015-09-30 18:52:09 UTC (rev 140711) +++ trunk/dports/gnome/gstreamer1/Portfile 2015-09-30 19:17:08 UTC (rev 140712) @@ -43,6 +43,8 @@ conflicts_build check +patchfiles patch-struct-sockadr.diff + # global_symbol_pipe gets set to "" on Leopard use_autoreconf yes autoreconf.args -fvi Added: trunk/dports/gnome/gstreamer1/files/patch-struct-sockadr.diff =================================================================== --- trunk/dports/gnome/gstreamer1/files/patch-struct-sockadr.diff (rev 0) +++ trunk/dports/gnome/gstreamer1/files/patch-struct-sockadr.diff 2015-09-30 19:17:08 UTC (rev 140712) @@ -0,0 +1,20 @@ +--- configure.ac.orig 2015-09-30 10:39:38.000000000 -0700 ++++ configure.ac 2015-09-30 10:44:23.000000000 -0700 +@@ -349,6 +349,7 @@ + AC_COMPILE_IFELSE([AC_LANG_PROGRAM( + [[ + #include <ifaddrs.h> ++ #include <sys/socket.h> + #include <net/if.h> + #include <net/if_dl.h> + ]], +--- libs/gst/helpers/gst-ptp-helper.c.orig 2015-09-30 10:58:52.000000000 -0700 ++++ libs/gst/helpers/gst-ptp-helper.c 2015-09-30 10:59:45.000000000 -0700 +@@ -37,6 +37,7 @@ + #include <sys/types.h> + #include <errno.h> + #include <sys/ioctl.h> ++#include <sys/socket.h> + #include <net/if.h> + #include <netinet/in.h> + #include <string.h>

1 0

[140711] trunk/dports/science/gnuradio/Portfile
by michaelld＠macports.org 30 Sep '15

30 Sep '15

Revision: 140711 https://trac.macports.org/changeset/140711 Author: michaelld(a)macports.org Date: 2015-09-30 11:52:09 -0700 (Wed, 30 Sep 2015) Log Message: ----------- gnuradio: update devel to 222e0003 and next to 779fb8fd, both 20150925. Modified Paths: -------------- trunk/dports/science/gnuradio/Portfile Modified: trunk/dports/science/gnuradio/Portfile =================================================================== --- trunk/dports/science/gnuradio/Portfile 2015-09-30 17:34:07 UTC (rev 140710) +++ trunk/dports/science/gnuradio/Portfile 2015-09-30 18:52:09 UTC (rev 140711) @@ -92,11 +92,11 @@ name gnuradio-devel conflicts gnuradio-legacy gnuradio gnuradio-next - github.setup gnuradio gnuradio 88fecd2ff2d5be5453ae3689acb325b002780198 - version 20150924 + github.setup gnuradio gnuradio 222e0003f9797a1b92d64855bd2b93f0d9099f93 + version 20150925 checksums \ - rmd160 b742a822ec592f7625dba39d511f681a08547b83 \ - sha256 5b02c9b31e13687fe669c9ffa87b70543fc751153f8af5f6be7121e2a73411e4 + rmd160 b622a07ad2ccf173a86e5f12b7761e96edbc6d28 \ + sha256 a747114bacb393785e06f2f69e656073770bf985ffca0c8877fe4ef29fa7f420 } @@ -108,11 +108,11 @@ name gnuradio-next conflicts gnuradio-legacy gnuradio gnuradio-devel - github.setup gnuradio gnuradio 30b56238328ea7240aceb32bbf6006f1de6b096f - version 20150924 + github.setup gnuradio gnuradio 779fb8fdb5bb2950efcf2a8befcb6733cb6d839d + version 20150925 checksums \ - rmd160 ece4ddf3db2a14a4f3322c6b147c2b49697dda36 \ - sha256 3e8410e01303f6cd32e585b8744e033d14faeb8ba8ed23f3232c1a1d4a49d2bc + rmd160 384a0008baf8e6afabbeb5e99cdbcdf227aa3963 \ + sha256 9eb5309d5786419e6b571c339bab4b38ae59f03718d3eb9357575cbaafec99ea # overload the github livecheck URL with the correct branch

1 0

[140710] trunk/dports/devel/libusb/Portfile
by michaelld＠macports.org 30 Sep '15

30 Sep '15

Revision: 140710 https://trac.macports.org/changeset/140710 Author: michaelld(a)macports.org Date: 2015-09-30 10:34:07 -0700 (Wed, 30 Sep 2015) Log Message: ----------- libusb-devel: update to 960a6e75 (20150921). Modified Paths: -------------- trunk/dports/devel/libusb/Portfile Modified: trunk/dports/devel/libusb/Portfile =================================================================== --- trunk/dports/devel/libusb/Portfile 2015-09-30 17:32:46 UTC (rev 140709) +++ trunk/dports/devel/libusb/Portfile 2015-09-30 17:34:07 UTC (rev 140710) @@ -40,10 +40,10 @@ long_description ${long_description} \ This port provides devel version of ${name}, updated weekly to monthly. - github.setup libusb libusb 4a0eacbc6f4268c29c1c8d13a89aa42f689bb91c - version 20150920 - checksums rmd160 ac9ab014ee4d8945af0e6a378f7342d369a4c2be \ - sha256 0029804fb123b357854f2cc0aef086c47e40dad003adf811110c4d5c59a96278 + github.setup libusb libusb 960a6e7506c4d0d59052056ae2ebfffbe8587175 + version 20150921 + checksums rmd160 ba8ec7c89992e201287e129f7648e0a32b35f94a \ + sha256 a4895d98259082d4033873a22ccba4bfe4bff9335f8e8a06a854fc2cca5f35f1 conflicts libusb

1 0

[140709] trunk/dports/science/gnss-sdr/Portfile
by michaelld＠macports.org 30 Sep '15

30 Sep '15

Revision: 140709 https://trac.macports.org/changeset/140709 Author: michaelld(a)macports.org Date: 2015-09-30 10:32:46 -0700 (Wed, 30 Sep 2015) Log Message: ----------- gnss-sdr-next: use append for gnuradio-next dependency. Modified Paths: -------------- trunk/dports/science/gnss-sdr/Portfile Modified: trunk/dports/science/gnss-sdr/Portfile =================================================================== --- trunk/dports/science/gnss-sdr/Portfile 2015-09-30 17:31:47 UTC (rev 140708) +++ trunk/dports/science/gnss-sdr/Portfile 2015-09-30 17:32:46 UTC (rev 140709) @@ -75,7 +75,7 @@ conflicts gnss-sdr gnss-sdr-devel - depends_lib port:gnuradio-next + depends_lib-append port:gnuradio-next require_active_variants port:gnuradio-next uhd

1 0