Added: trunk/dports/multimedia/smpeg/files/patch-configure-flags.diff (0 => 72028)
--- trunk/dports/multimedia/smpeg/files/patch-configure-flags.diff (rev 0)
+++ trunk/dports/multimedia/smpeg/files/patch-configure-flags.diff 2010-09-30 20:44:25 UTC (rev 72028)
@@ -0,0 +1,127 @@
+--- configure.in.orig
++++ configure.in
+@@ -60,7 +60,7 @@ dnl The alpha architecture needs special
+ case "$target" in
+ alpha*-*-linux*)
+ if test x$ac_cv_prog_gcc = xyes; then
+- CFLAGS="$CFLAGS -mcpu=ev4 -Wa,-mall"
++ EXTRA_CFLAGS="$EXTRA_CFLAGS -mcpu=ev4 -Wa,-mall"
+ fi
+ ;;
+ sparc*-*-solaris*)
+@@ -102,17 +102,17 @@ AC_ARG_ENABLE(debug,
+ , enable_debug=yes)
+ if test x$enable_debug != xyes; then
+ if test x$ac_cv_prog_gcc = xyes; then
+- CFLAGS="$CFLAGS -fexpensive-optimizations -fomit-frame-pointer"
++ EXTRA_CFLAGS="$EXTRA_CFLAGS -fexpensive-optimizations -fomit-frame-pointer"
+ fi
+ case "$target" in
+ i486-*-*) # Yeah right. :)
+ if test x$ac_cv_prog_gcc = xyes; then
+- CFLAGS="$CFLAGS -march=486"
++ EXTRA_CFLAGS="$EXTRA_CFLAGS -march=486"
+ fi
+ ;;
+ i?86-*-*)
+ if test x$ac_cv_prog_gcc = xyes; then
+- CFLAGS="$CFLAGS -march=pentium -mcpu=pentiumpro"
++ EXTRA_CFLAGS="$EXTRA_CFLAGS -march=pentium -mcpu=pentiumpro"
+ fi
+ ;;
+ esac
+@@ -124,7 +124,7 @@ AM_PATH_SDL($SDL_VERSION,
+ :,
+ AC_MSG_ERROR([*** SDL version $SDL_VERSION not found!])
+ )
+-CFLAGS="$CFLAGS $SDL_CFLAGS"
++EXTRA_CFLAGS="$EXTRA_CFLAGS $SDL_CFLAGS"
+ LIBS="$LIBS $SDL_LIBS"
+
+ dnl See if we need to pass -lm for the math library
+@@ -145,7 +145,7 @@ if test x$enable_mmx = xyes; then
+ AC_MSG_RESULT($use_mmx)
+
+ if test x$use_mmx = xyes; then
+- CFLAGS="$CFLAGS -DUSE_MMX"
++ EXTRA_CFLAGS="$EXTRA_CFLAGS -DUSE_MMX"
+ fi
+ fi
+
+@@ -162,7 +162,7 @@ if test x$enable_ati = xyes; then
+ AC_MSG_RESULT($use_ati)
+
+ if test x$use_ati = xyes; then
+- CFLAGS="$CFLAGS -DUSE_ATI"
++ EXTRA_CFLAGS="$EXTRA_CFLAGS -DUSE_ATI"
+ fi
+ fi
+
+@@ -171,7 +171,7 @@ AC_ARG_ENABLE(timestamp-sync,
+ [ --enable-timestamp-sync enable system timestamp sync [default=yes]],
+ , enable_timestamp_sync=no)
+ if test x$enable_timestamp_sync = xyes; then
+- CFLAGS="$CFLAGS -DUSE_TIMESTAMP_SYNC"
++EXTRA_CFLAGS="$EXTRA_CFLAGS -DUSE_TIMESTAMP_SYNC"
+ fi
+
+ dnl Enable the use of the system thread
+@@ -179,7 +179,7 @@ AC_ARG_ENABLE(threaded-system,
+ [ --enable-threaded-system enable system thread [default=no]],
+ , enable_threaded_system=no)
+ if test x$enable_threaded_system = xyes; then
+- CFLAGS="$CFLAGS -DUSE_SYSTEM_THREAD"
++EXTRA_CFLAGS="$EXTRA_CFLAGS -DUSE_SYSTEM_THREAD"
+ fi
+
+ dnl Enable threaded audio
+@@ -187,7 +187,7 @@ AC_ARG_ENABLE(threaded-audio,
+ [ --enable-threaded-audio enable threaded audio [default=yes]],
+ , enable_threaded_audio=yes)
+ if test x$enable_threaded_audio = xyes; then
+- CFLAGS="$CFLAGS -DTHREADED_AUDIO"
++EXTRA_CFLAGS="$EXTRA_CFLAGS -DTHREADED_AUDIO"
+ fi
+
+ dnl See if we can build the GTk player
+@@ -198,7 +198,7 @@ have_gtk=no
+ if test x$enable_gtk_player = xyes; then
+ AM_PATH_GTK(1.2.1, have_gtk=yes)
+ if test x$have_gtk = xyes; then
+- CFLAGS="$CFLAGS $GTK_CFLAGS"
++ EXTRA_CFLAGS="$EXTRA_CFLAGS $GTK_CFLAGS"
+ fi
+ AC_SUBST(GTK_LIBS)
+ fi
+@@ -224,7 +224,7 @@ if test x$enable_opengl_player = xyes; t
+ AC_PATH_X
+ AC_PATH_XTRA
+ if test x$have_x = xyes; then
+- CFLAGS="$CFLAGS $X_CFLAGS"
++ EXTRA_CFLAGS="$EXTRA_CFLAGS $X_CFLAGS"
+ SYS_GL_LIBS="$X_LIBS -lGL -lGLU"
+ else
+ SYS_GL_LIBS="-lGL -lGLU"
+@@ -255,17 +255,16 @@ AC_ARG_ENABLE(assertions,
+ [ --enable-assertions Enable consistency checks in decoding [default=no]],
+ , enable_assertions=no)
+ if test x$enable_assertions != xyes; then
+- CFLAGS="$CFLAGS -DNDEBUG"
++ EXTRA_CFLAGS="$EXTRA_CFLAGS -DNDEBUG"
+ fi
+
+ dnl Add the source include directories
+-CFLAGS="$CFLAGS -I.. -DNOCONTROLS"
+-CFLAGS="$CFLAGS -I\$(top_srcdir) -I\$(top_srcdir)/audio -I\$(top_srcdir)/video"
+-CXXFLAGS="$CFLAGS"
+-
++EXTRA_CFLAGS="$EXTRA_CFLAGS -I.. -DNOCONTROLS"
++EXTRA_CFLAGS="$EXTRA_CFLAGS -I\$(top_srcdir) -I\$(top_srcdir)/audio -I\$(top_srcdir)/video"
++CXXFLAGS="$EXTRA_CFLAGS $CXXFLAGS"
++CFLAGS="$EXTRA_CFLAGS $CFLAGS"
+
+ dnl C++ flags are the same as the C flags
+-CXXFLAGS="$CFLAGS"
+ if test x$GCC = xyes; then
+ # Check to see if options -fno-rtti -fno-exceptions are supported
+ AC_MSG_CHECKING(if $CXX supports -fno-rtti -fno-exceptions)
Added: trunk/dports/multimedia/smpeg/files/patch-smpeg-gtkm4.diff (0 => 72028)
--- trunk/dports/multimedia/smpeg/files/patch-smpeg-gtkm4.diff (rev 0)
+++ trunk/dports/multimedia/smpeg/files/patch-smpeg-gtkm4.diff 2010-09-30 20:44:25 UTC (rev 72028)
@@ -0,0 +1,429 @@
+Taken from http://bugs.gentoo.org/127866
+Index: m4/glib.m4
+===================================================================
+--- /dev/null
++++ m4/glib.m4
+@@ -0,0 +1,196 @@
++# Configure paths for GLIB
++# Owen Taylor 97-11-3
++
++dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
++dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or
++dnl gthread is specified in MODULES, pass to glib-config
++dnl
++AC_DEFUN([AM_PATH_GLIB],
++[dnl
++dnl Get the cflags and libraries from the glib-config script
++dnl
++AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)],
++ glib_config_prefix="$withval", glib_config_prefix="")
++AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
++ glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
++AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program],
++ , enable_glibtest=yes)
++
++ if test x$glib_config_exec_prefix != x ; then
++ glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
++ if test x${GLIB_CONFIG+set} != xset ; then
++ GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
++ fi
++ fi
++ if test x$glib_config_prefix != x ; then
++ glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
++ if test x${GLIB_CONFIG+set} != xset ; then
++ GLIB_CONFIG=$glib_config_prefix/bin/glib-config
++ fi
++ fi
++
++ for module in . $4
++ do
++ case "$module" in
++ gmodule)
++ glib_config_args="$glib_config_args gmodule"
++ ;;
++ gthread)
++ glib_config_args="$glib_config_args gthread"
++ ;;
++ esac
++ done
++
++ AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
++ min_glib_version=ifelse([$1], ,0.99.7,$1)
++ AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
++ no_glib=""
++ if test "$GLIB_CONFIG" = "no" ; then
++ no_glib=yes
++ else
++ GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
++ GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
++ glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
++ glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
++ glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
++ if test "x$enable_glibtest" = "xyes" ; then
++ ac_save_CFLAGS="$CFLAGS"
++ ac_save_LIBS="$LIBS"
++ CFLAGS="$CFLAGS $GLIB_CFLAGS"
++ LIBS="$GLIB_LIBS $LIBS"
++dnl
++dnl Now check if the installed GLIB is sufficiently new. (Also sanity
++dnl checks the results of glib-config to some extent
++dnl
++ rm -f conf.glibtest
++ AC_TRY_RUN([
++#include <glib.h>
++#include <stdio.h>
++#include <stdlib.h>
++
++int
++main ()
++{
++ int major, minor, micro;
++ char *tmp_version;
++
++ system ("touch conf.glibtest");
++
++ /* HP/UX 9 (%@#!) writes to sscanf strings */
++ tmp_version = g_strdup("$min_glib_version");
++ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
++ printf("%s, bad version string\n", "$min_glib_version");
++ exit(1);
++ }
++
++ if ((glib_major_version != $glib_config_major_version) ||
++ (glib_minor_version != $glib_config_minor_version) ||
++ (glib_micro_version != $glib_config_micro_version))
++ {
++ printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
++ $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
++ glib_major_version, glib_minor_version, glib_micro_version);
++ printf ("*** was found! If glib-config was correct, then it is best\n");
++ printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
++ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
++ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
++ printf("*** required on your system.\n");
++ printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
++ printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
++ printf("*** before re-running configure\n");
++ }
++ else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
++ (glib_minor_version != GLIB_MINOR_VERSION) ||
++ (glib_micro_version != GLIB_MICRO_VERSION))
++ {
++ printf("*** GLIB header files (version %d.%d.%d) do not match\n",
++ GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
++ printf("*** library (version %d.%d.%d)\n",
++ glib_major_version, glib_minor_version, glib_micro_version);
++ }
++ else
++ {
++ if ((glib_major_version > major) ||
++ ((glib_major_version == major) && (glib_minor_version > minor)) ||
++ ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
++ {
++ return 0;
++ }
++ else
++ {
++ printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
++ glib_major_version, glib_minor_version, glib_micro_version);
++ printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
++ major, minor, micro);
++ printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
++ printf("***\n");
++ printf("*** If you have already installed a sufficiently new version, this error\n");
++ printf("*** probably means that the wrong copy of the glib-config shell script is\n");
++ printf("*** being found. The easiest way to fix this is to remove the old version\n");
++ printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
++ printf("*** correct copy of glib-config. (In this case, you will have to\n");
++ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
++ printf("*** so that the correct libraries are found at run-time))\n");
++ }
++ }
++ return 1;
++}
++],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
++ CFLAGS="$ac_save_CFLAGS"
++ LIBS="$ac_save_LIBS"
++ fi
++ fi
++ if test "x$no_glib" = x ; then
++ AC_MSG_RESULT(yes)
++ ifelse([$2], , :, [$2])
++ else
++ AC_MSG_RESULT(no)
++ if test "$GLIB_CONFIG" = "no" ; then
++ echo "*** The glib-config script installed by GLIB could not be found"
++ echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
++ echo "*** your path, or set the GLIB_CONFIG environment variable to the"
++ echo "*** full path to glib-config."
++ else
++ if test -f conf.glibtest ; then
++ :
++ else
++ echo "*** Could not run GLIB test program, checking why..."
++ CFLAGS="$CFLAGS $GLIB_CFLAGS"
++ LIBS="$LIBS $GLIB_LIBS"
++ AC_TRY_LINK([
++#include <glib.h>
++#include <stdio.h>
++], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
++ [ echo "*** The test program compiled, but did not run. This usually means"
++ echo "*** that the run-time linker is not finding GLIB or finding the wrong"
++ echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
++ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
++ echo "*** to the installed location Also, make sure you have run ldconfig if that"
++ echo "*** is required on your system"
++ echo "***"
++ echo "*** If you have an old version installed, it is best to remove it, although"
++ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
++ echo "***"
++ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
++ echo "*** came with the system with the command"
++ echo "***"
++ echo "*** rpm --erase --nodeps gtk gtk-devel" ],
++ [ echo "*** The test program failed to compile or link. See the file config.log for the"
++ echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
++ echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
++ echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
++ CFLAGS="$ac_save_CFLAGS"
++ LIBS="$ac_save_LIBS"
++ fi
++ fi
++ GLIB_CFLAGS=""
++ GLIB_LIBS=""
++ ifelse([$3], , :, [$3])
++ fi
++ AC_SUBST(GLIB_CFLAGS)
++ AC_SUBST(GLIB_LIBS)
++ rm -f conf.glibtest
++])
+Index: m4/gtk.m4
+===================================================================
+--- /dev/null
++++ m4/gtk.m4
+@@ -0,0 +1,194 @@
++# Configure paths for GTK+
++# Owen Taylor 97-11-3
++
++dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
++dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
++dnl
++AC_DEFUN([AM_PATH_GTK],
++[dnl
++dnl Get the cflags and libraries from the gtk-config script
++dnl
++AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
++ gtk_config_prefix="$withval", gtk_config_prefix="")
++AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
++ gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
++AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
++ , enable_gtktest=yes)
++
++ for module in . $4
++ do
++ case "$module" in
++ gthread)
++ gtk_config_args="$gtk_config_args gthread"
++ ;;
++ esac
++ done
++
++ if test x$gtk_config_exec_prefix != x ; then
++ gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
++ if test x${GTK_CONFIG+set} != xset ; then
++ GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
++ fi
++ fi
++ if test x$gtk_config_prefix != x ; then
++ gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
++ if test x${GTK_CONFIG+set} != xset ; then
++ GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
++ fi
++ fi
++
++ AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
++ min_gtk_version=ifelse([$1], ,0.99.7,$1)
++ AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
++ no_gtk=""
++ if test "$GTK_CONFIG" = "no" ; then
++ no_gtk=yes
++ else
++ GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
++ GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
++ gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
++ gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
++ gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
++ if test "x$enable_gtktest" = "xyes" ; then
++ ac_save_CFLAGS="$CFLAGS"
++ ac_save_LIBS="$LIBS"
++ CFLAGS="$CFLAGS $GTK_CFLAGS"
++ LIBS="$GTK_LIBS $LIBS"
++dnl
++dnl Now check if the installed GTK is sufficiently new. (Also sanity
++dnl checks the results of gtk-config to some extent
++dnl
++ rm -f conf.gtktest
++ AC_TRY_RUN([
++#include <gtk/gtk.h>
++#include <stdio.h>
++#include <stdlib.h>
++
++int
++main ()
++{
++ int major, minor, micro;
++ char *tmp_version;
++
++ system ("touch conf.gtktest");
++
++ /* HP/UX 9 (%@#!) writes to sscanf strings */
++ tmp_version = g_strdup("$min_gtk_version");
++ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
++ printf("%s, bad version string\n", "$min_gtk_version");
++ exit(1);
++ }
++
++ if ((gtk_major_version != $gtk_config_major_version) ||
++ (gtk_minor_version != $gtk_config_minor_version) ||
++ (gtk_micro_version != $gtk_config_micro_version))
++ {
++ printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
++ $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
++ gtk_major_version, gtk_minor_version, gtk_micro_version);
++ printf ("*** was found! If gtk-config was correct, then it is best\n");
++ printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
++ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
++ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
++ printf("*** required on your system.\n");
++ printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
++ printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
++ printf("*** before re-running configure\n");
++ }
++#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
++ else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
++ (gtk_minor_version != GTK_MINOR_VERSION) ||
++ (gtk_micro_version != GTK_MICRO_VERSION))
++ {
++ printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
++ GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
++ printf("*** library (version %d.%d.%d)\n",
++ gtk_major_version, gtk_minor_version, gtk_micro_version);
++ }
++#endif /* defined (GTK_MAJOR_VERSION) ... */
++ else
++ {
++ if ((gtk_major_version > major) ||
++ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
++ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
++ {
++ return 0;
++ }
++ else
++ {
++ printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
++ gtk_major_version, gtk_minor_version, gtk_micro_version);
++ printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
++ major, minor, micro);
++ printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
++ printf("***\n");
++ printf("*** If you have already installed a sufficiently new version, this error\n");
++ printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
++ printf("*** being found. The easiest way to fix this is to remove the old version\n");
++ printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
++ printf("*** correct copy of gtk-config. (In this case, you will have to\n");
++ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
++ printf("*** so that the correct libraries are found at run-time))\n");
++ }
++ }
++ return 1;
++}
++],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
++ CFLAGS="$ac_save_CFLAGS"
++ LIBS="$ac_save_LIBS"
++ fi
++ fi
++ if test "x$no_gtk" = x ; then
++ AC_MSG_RESULT(yes)
++ ifelse([$2], , :, [$2])
++ else
++ AC_MSG_RESULT(no)
++ if test "$GTK_CONFIG" = "no" ; then
++ echo "*** The gtk-config script installed by GTK could not be found"
++ echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
++ echo "*** your path, or set the GTK_CONFIG environment variable to the"
++ echo "*** full path to gtk-config."
++ else
++ if test -f conf.gtktest ; then
++ :
++ else
++ echo "*** Could not run GTK test program, checking why..."
++ CFLAGS="$CFLAGS $GTK_CFLAGS"
++ LIBS="$LIBS $GTK_LIBS"
++ AC_TRY_LINK([
++#include <gtk/gtk.h>
++#include <stdio.h>
++], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
++ [ echo "*** The test program compiled, but did not run. This usually means"
++ echo "*** that the run-time linker is not finding GTK or finding the wrong"
++ echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
++ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
++ echo "*** to the installed location Also, make sure you have run ldconfig if that"
++ echo "*** is required on your system"
++ echo "***"
++ echo "*** If you have an old version installed, it is best to remove it, although"
++ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
++ echo "***"
++ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
++ echo "*** came with the system with the command"
++ echo "***"
++ echo "*** rpm --erase --nodeps gtk gtk-devel" ],
++ [ echo "*** The test program failed to compile or link. See the file config.log for the"
++ echo "*** exact error that occured. This usually means GTK was incorrectly installed"
++ echo "*** or that you have moved GTK since it was installed. In the latter case, you"
++ echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
++ CFLAGS="$ac_save_CFLAGS"
++ LIBS="$ac_save_LIBS"
++ fi
++ fi
++ GTK_CFLAGS=""
++ GTK_LIBS=""
++ ifelse([$3], , :, [$3])
++ fi
++ AC_SUBST(GTK_CFLAGS)
++ AC_SUBST(GTK_LIBS)
++ rm -f conf.gtktest
++])
+Index: m4/socklen.m4
+===================================================================
+--- /dev/null
++++ m4/socklen.m4
+@@ -0,0 +1,23 @@
++###################################################################
++## To: autoconf@gnu.org
++## Subject: socklen_t
++## From: lars brinkhoff <lars@nocrew.org>
++## Date: 26 Mar 1999 11:38:09 +0100
++##
++## Here's an attempt at a check for socklen_t. AC_CHECK_TYPE doesn't
++## work because it doesn't search <sys/socket.h>. Maybe that macro
++## should be changed instead.
++##
++AC_DEFUN(AC_TYPE_SOCKLEN_T,
++[AC_CACHE_CHECK([for socklen_t], ac_cv_type_socklen_t,
++[
++ AC_TRY_COMPILE(
++ [#include <sys/socket.h>],
++ [socklen_t len = 42; return len;],
++ ac_cv_type_socklen_t=yes,
++ ac_cv_type_socklen_t=no)
++])
++ if test $ac_cv_type_socklen_t != yes; then
++ AC_DEFINE(socklen_t, int)
++ fi
++])