Deleted: users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl (69213 => 69214)
--- users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl 2010-06-28 22:08:36 UTC (rev 69213)
+++ users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl 2010-06-28 23:12:40 UTC (rev 69214)
@@ -1,275 +0,0 @@
-# $Id$
-#
-# Copyright (c) 2010 Dan R. K. Ports <dports@macports.org>
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. Neither the name of The MacPorts Project nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#
-# This portgroup contains common definitions for a MacPorts
-# installation of TeX Live. It can be used in one of two ways:
-#
-# 1. for installing "texmf ports". These contain tex files and are
-# installed from preprocessed distfiles made from TeXLive
-# packages. These ports should invoke texlive.texmfport to set up
-# the installation process.
-#
-# 2. other ports, like texlive-common or texlive-bin can include this
-# portgroup (but not call texlive.texmfport) to get texlive path
-# definitions and the like.
-
-#
-# texmf tree paths
-#
-
-# texmf files installed by texlive
-set texlive_texmfmain "${prefix}/share/texmf-texlive"
-
-# texmf files installed by texlive, but nominally distribution-independent
-# not clear it's really necessary to separate these from texmfmain,
-# but texlive goes to great effort to keep them separate, so we might as
-# well too
-set texlive_texmfdist "${prefix}/share/texmf-texlive-dist"
-
-# "local" texmf files, e.g. installed by ports other than texlive
-set texlive_texmflocal "${prefix}/share/texmf"
-
-# variable runtime data, e.g. formats
-set texlive_texmfsysvar "${prefix}/var/db/texmf"
-
-# configuration data from texconfig
-set texlive_texmfsysconfig "${prefix}/etc/texmf"
-
-
-#
-# For installing texmf ports
-#
-
-# Files to skip installation of, specified in terms of their path in
-# the texmf tree, e.g. texmf-dist/foo/bar/
-options texlive.exclude
-default texlive.exclude {}
-
-# Skip installing all manpages. A number of texmf ports include
-# manpages, but many of them are already installed by texmf-bin.
-options texlive.excludemanpages
-default texlive.excludemanpages no
-
-options texlive.formats texlive.languages texlive.maps
-default texlive.formats {}
-default texlive.languages {}
-default texlive.maps {}
-
-options texlive.forceupdatecnf
-default texlive.forceupdatecnf no
-
-proc texlive.texmfport {} {
- homepage http://www.tug.org/texlive/
- platforms darwin
-
- supported_archs noarch
-
- master_sites http://flute.csail.mit.edu/texlive/
- use_bzip2 yes
-
- global name master_sites
- livecheck.type regex
- livecheck.url ${master_sites}
- livecheck.regex ${name}-(\\d+)\\.tar\\.bz2
-
- depends_lib-append port:texlive-common port:texlive-bin
-
- variant doc description "Install documentation" { }
- variant src description "Install TeX source" { }
- default_variants +doc
-
- use_configure no
-
- build { }
-
- destroot {
- set indexlist {"runfiles"}
- if {[variant_isset "doc"]} { lappend indexlist "docfiles" }
- if {[variant_isset "src"]} { lappend indexlist "srcfiles" }
-
- # copy files listed in tlpkginfo/$indexname into destroot
- foreach indexname $indexlist {
- set filelist [open ${worksrcpath}/tlpkginfo/${indexname}]
- while {[gets $filelist line] >= 0} {
- if {[lsearch -exact ${texlive.exclude} $line] >= 0} {
- continue
- }
- set srcfile ${worksrcpath}/${indexname}/$line
-
- # check for manpages and treat specially
- if [regexp {^texmf/doc/man/man(\d)/([^/]+)} $line -> section filename] {
- if {![tbool texlive.excludemanpages]} {
- if [string match "*.$section" $filename] {
- # actually a manpage; install it
- copy $srcfile ${destroot}${prefix}/share/man/man$section/
- } else {
- # not actually a manpage; do nothing
- # (e.g. don't install PDF manpages)
- }
- }
- } else {
- # not a manpage; install into requested target dir
- # translate path in line to destination
- set splitline [split $line "/"]
- switch [lindex $splitline 0] {
- "texmf" {lset splitline 0 ${texlive_texmfmain}}
- "texmf-dist" {lset splitline 0 ${texlive_texmfdist}}
- default { ui_msg "warning: unknown file destination" }
- }
- set dstfile [join $splitline "/"]
-
- # create directory if necessary, and install file
- xinstall -d ${destroot}[file dirname $dstfile]
- copy ${srcfile} ${destroot}${dstfile}
- }
- }
- }
-
- if {${texlive.formats} != ""} {
- xinstall -d ${destroot}${texlive_texmfsysconfig}/fmtutil.d
- set fmtfilename \
- ${destroot}${texlive_texmfsysconfig}/fmtutil.d/10${name}.cnf
- set fmtfile [open $fmtfilename "w"]
- foreach x ${texlive.formats} {
- set fmtenabled [lindex $x 0]
- set fmtname [lindex $x 1]
- set fmtengine [lindex $x 2]
- set fmtpatterns [lindex $x 3]
- set fmtoptions [lindex $x 4]
- if {!$fmtenabled} {
- set fmtprefix "#! "
- } else {
- set fmtprefix ""
- }
-
- puts $fmtfile \
- "$fmtprefix$fmtname\t$fmtengine\t$fmtpatterns\t$fmtoptions"
-
- # Simulate texlinks
- if {($fmtengine != $fmtname) &&
- ![file exists ${destroot}${prefix}/bin/$fmtname]} {
- ln -s ${prefix}/bin/$fmtengine \
- ${destroot}${prefix}/bin/$fmtname
- }
- }
-
- close $fmtfile
- }
-
- if {${texlive.maps} != ""} {
- xinstall -d ${destroot}${texlive_texmfsysconfig}/updmap.d
- set mapfilename \
- ${destroot}${texlive_texmfsysconfig}/updmap.d/10${name}.cfg
- set mapfile [open $mapfilename "w"]
- foreach x ${texlive.maps} {
- puts $mapfile $x
- }
- close $mapfile
- }
-
- if {${texlive.languages} != ""} {
- xinstall -d ${destroot}${texlive_texmfsysconfig}/language.d
- set langdatfilename \
- ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.dat
- set langdeffilename \
- ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.def
- set langdatfile [open $langdatfilename "w"]
- set langdeffile [open $langdeffilename "w"]
- foreach x ${texlive.languages} {
- set langname [lindex $x 0]
- set langfile [lindex $x 1]
- set langlhmin [lindex $x 2]
- set langrhmin [lindex $x 3]
- set langsyns [lindex $x 4]
-
- puts $langdatfile "$langname $langfile"
- foreach syn $langsyns {
- puts $langdatfile "=$syn"
- }
-
- foreach syn [concat $langname $langsyns] {
- ui_msg $syn
- puts $langdeffile "\\addlanguage{$syn}{$langfile}{}{$langlhmin}{$langrhmin}"
- }
- }
- close $langdatfile
- close $langdeffile
- }
- }
-
- post-activate {
- system "${prefix}/bin/texhash"
- if {${texlive.forceupdatecnf} || ${texlive.languages} != ""} {
- system "${prefix}/libexec/texlive-update-cnf language.dat"
- system "${prefix}/libexec/texlive-update-cnf language.def"
- }
- if {${texlive.forceupdatecnf} || ${texlive.maps} != ""} {
- system "${prefix}/libexec/texlive-update-cnf updmap.cfg"
- system "${prefix}/bin/updmap-sys"
- }
- if {${texlive.forceupdatecnf} || ${texlive.formats} != ""} {
- system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf"
- system "${prefix}/bin/fmtutil-sys --all"
- }
- }
-
- post-deactivate {
- # Update ls-R and any config files to reflect that the package
- # is now gone
- system "${prefix}/bin/texhash"
- if {${texlive.forceupdatecnf} || ${texlive.languages} != ""} {
- system "${prefix}/libexec/texlive-update-cnf language.dat"
- system "${prefix}/libexec/texlive-update-cnf language.def"
- }
- if {${texlive.forceupdatecnf} || ${texlive.maps} != ""} {
- system "${prefix}/libexec/texlive-update-cnf updmap.cfg"
- }
- if {${texlive.forceupdatecnf} || ${texlive.formats} != ""} {
- system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf"
- }
-
- # Remove any generated format files
- foreach x ${texlive.formats} {
- set fmtname [lindex $x 1]
- set fmtengine [lindex $x 2]
- switch $fmtengine {
- "mf" -
- "mf-nowin" {set fmtengine "metafont"}
- "mpost" {set fmtengine "metapost"}
- }
-
- foreach filename [glob -nocomplain ${texlive_texmfsysvar}/web2c/$fmtengine/$fmtname.*] {
- delete $filename
- }
- }
- }
-}