Revision: 105623 https://trac.macports.org/changeset/105623 Author: dports@macports.org Date: 2013-04-28 01:28:16 -0700 (Sun, 28 Apr 2013) Log Message: ----------- clean up part of my users directory Removed Paths: ------------- users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl users/dports/ports/tex/ Deleted: users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl =================================================================== --- users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl 2013-04-28 01:32:12 UTC (rev 105622) +++ users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl 2013-04-28 08:28:16 UTC (rev 105623) @@ -1,517 +0,0 @@ -# $Id$ -# -# Copyright (c) 2010 Dan R. K. Ports <dports@macports.org> -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. Neither the name of The MacPorts Project nor the names of its -# contributors may be used to endorse or promote products derived from -# this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -# -# This portgroup contains common definitions for a MacPorts -# installation of TeX Live. It can be used in one of two ways: -# -# 1. for installing "texmf ports". These contain tex files and are -# installed from preprocessed distfiles made from TeXLive -# packages. These ports should invoke texlive.texmfport to set up -# the installation process. -# -# 2. other ports, like texlive-common or texlive-bin can include this -# portgroup (but not call texlive.texmfport) to get texlive path -# definitions and the like. - -# -# texmf tree paths -# - -# texmf files installed by texlive -set texlive_texmfmain "${prefix}/share/texmf-texlive" - -# texmf files installed by texlive, but nominally distribution-independent -# not clear it's really necessary to separate these from texmfmain, -# but texlive goes to great effort to keep them separate, so we might as -# well too -set texlive_texmfdist "${prefix}/share/texmf-texlive-dist" - -# texmf files installed by ports other than texlive -set texlive_texmfports "${prefix}/share/texmf" - -# optional tree for user-installed texmf files -set texlive_texmflocal "${prefix}/share/texmf-local" - -# variable runtime data, e.g. formats -set texlive_texmfsysvar "${prefix}/var/db/texmf" - -# configuration data from texconfig -set texlive_texmfsysconfig "${prefix}/etc/texmf" - -# user's local texmf tree. -# Note that this path is specified relative to the user's -# home directory, i.e. it begins with an implicit ~/ -set texlive_texmfhome "Library/texmf" - - -# location of binaries installed by texlive-bin -# -# All TeXLive binaries are built by texlive-bin, but most of them -# aren't usable without the support files installed by other ports: -# for example, xetex needs texlive-xetex, tex4ht needs -# texlive-htmlxml, and just about everything needs texlive-basic. We -# don't want to install useless files into $prefix/bin, so instead -# texlive-bin installs its binaries into this "hidden" directory, and -# other ports "activate" them when they are ready to be used by creating -# symlinks into $prefix/bin. -set texlive_bindir "${prefix}/libexec/texlive/binaries" - -# another directory containing symlinks to activated texlive binaries -# -# This is provided to support MacTeX's TeX Distribution preference -# pane: it can select the active TeX distribution by pointing the -# /usr/texbin symlink here -# -# It also seems like the prefpane wants architecture-specific links, -# and may want version-specific ones in the future, so create those in -# ${texlive_mactex_texdistdir}. -set texlive_mactex_texbindir "${prefix}/libexec/texlive/texbin" -set texlive_mactex_texdistdir "${prefix}/libexec/texlive/texdist" - -# update texmf file path databases (ls-R) -# -# This should be run in the post-activate/deactivate hooks of any port -# that installs texmf files. It updates the kpathsea database using -# mktexlsr (formerly texhash), as well as ConTeXt's cache. -proc texlive.mktexlsr {} { - global prefix - - # Run mktexlsr. If that's not available, something's wrong. - system "${prefix}/bin/mktexlsr" - - # If mtxrun is available (i.e. ConTeXt is installed), update its - # cache too. If it's not installed, that's OK. - if [file exists "${prefix}/bin/mtxrun"] { - system "${prefix}/bin/mtxrun --generate" - } -} - -# Remove dependencies on any texlive-documentation-* ports, for use by -# -doc variants -proc texlive.removedocdepends {} { - global depends_lib - foreach dep $depends_lib { - if [regexp {^port:texlive-documentation-} $dep] { - depends_lib-delete $dep - } - } -} - -# -# For installing texmf ports -# - -# Files to skip installation of, specified in terms of their path in -# the texmf tree, e.g. texmf-dist/foo/bar/ -options texlive.exclude -default texlive.exclude {} - -options texlive.binaries texlive.formats texlive.languages texlive.maps -default texlive.binaries {} -default texlive.formats {} -default texlive.languages {} -default texlive.maps {} - -# Whether to regenerate all config files, maps, and formats after -# activation regardless of whether any new ones are installed. -options texlive.forceupdatecnf -default texlive.forceupdatecnf no - -# Whether to run mktexlsr after (de)activation. Usually required if -# installing any texmf files. -options texlive.use_mktexlsr -default texlive.use_mktexlsr yes - -# Running mktexlsr after deactivation can be disabled separately. Note -# that the value of this option is ignored if use_mktexlsr is disabled. -options texlive.use_mktexlsr_on_deactivate -default texlive.use_mktexlsr_on_deactivate yes - -proc texlive.texmfport {} { - homepage http://www.tug.org/texlive/ - platforms darwin - - supported_archs noarch - installs_libs no - - master_sites http://flute.csail.mit.edu/texlive/ - use_xz yes - - global name master_sites distname extract.suffix - livecheck.type regex - livecheck.url ${master_sites} - livecheck.regex ${name}-(\\d+)-run\\.tar - - depends_lib-append port:texlive-common port:texlive-bin - - # distfile is split into three parts, all of which extract into - # $worksrcdir - # - $distname-run contains the runtime files required to install the - # package, as well as the "tlpkginfo" directory containing metadata - # - $distname-doc contains optional documentation files - # - $distname-src contains optional source code for installed files - # The latter two are only downloaded if the corresponding variant - # is enabled. Currently, each package must have all three distfiles - # even if some are empty. - distfiles ${distname}-run${extract.suffix} - - variant doc description "Install documentation" { - distfiles-append ${distname}-doc${extract.suffix} - } - variant src description "Install TeX source" { - distfiles-append ${distname}-src${extract.suffix} - } - default_variants +doc - - if {![variant_isset "doc"]} { - # Skip any dependencies on texlive-documentation-* ports - texlive.removedocdepends - } - - use_configure no - - build { } - - destroot { - xinstall -d ${destroot}${texlive_mactex_texbindir} - - set indexlist {"runfiles"} - if {[variant_isset "doc"]} { lappend indexlist "docfiles" } - if {[variant_isset "src"]} { lappend indexlist "srcfiles" } - - # copy files listed in tlpkginfo/$indexname into destroot - foreach indexname $indexlist { - set filelist [open ${worksrcpath}/tlpkginfo/${indexname}] - while {[gets $filelist line] >= 0} { - # Check if file is excluded - set excluded false - foreach excludeline ${texlive.exclude} { - if {[string equal -nocase $line $excludeline]} { - # file is specifically excluded - set excluded true - break - } - if {[string equal -nocase -length [expr [string length $excludeline] + 1] $line "$excludeline/"]} { - # this is a file in an excluded directory - set excluded true - break; - } - } - if {$excluded} { - continue - } - - set srcfile ${worksrcpath}/${indexname}/$line - - # check for manpages and treat specially - if [regexp {^texmf/doc/man/man(\d)/([^/]+)} $line -> section filename] { - if [string match "*.$section" $filename] { - # actually a manpage; install it. If - # texlive-bin installed a manpage with the - # same name, use it instead to make sure the - # documentation matches the binary. - if [file exists ${texlive_bindir}/man${section}/$filename.gz] { - ln -s ${texlive_bindir}/man${section}/$filename.gz \ - ${destroot}${prefix}/share/man/man$section/ - } else { - copy $srcfile ${destroot}${prefix}/share/man/man$section/ - } - } else { - # not actually a manpage; do nothing - # (e.g. don't install PDF manpages) - } - } else { - # not a manpage; install into requested target dir - # translate path in line to destination - set splitline [split $line "/"] - switch [lindex $splitline 0] { - "texmf" {lset splitline 0 ${texlive_texmfmain}} - "texmf-dist" {lset splitline 0 ${texlive_texmfdist}} - default { ui_msg "warning: unknown file destination" } - } - set dstfile [join $splitline "/"] - - # create directory if necessary, and install file - xinstall -d ${destroot}[file dirname $dstfile] - copy ${srcfile} ${destroot}${dstfile} - } - } - } - - # install a documentation file containing the list of TeX - # packages installed. This also ensures that each port - # provides at least one file, even if there's nothing to - # install (e.g. documentation ports with -doc) - xinstall -d ${destroot}${prefix}/share/doc/texlive - set docfile [open ${destroot}${prefix}/share/doc/texlive/${name} "w"] - puts $docfile "${name} version ${version} (MacPorts revision ${version}_${revision})" - puts $docfile "\nTeX Live packages contained in this port:" - set pkgfile [open ${worksrcpath}/tlpkginfo/pkgs] - while {[gets $pkgfile line] >= 0} { - set splitline [split $line] - set pkg [lindex $splitline 0] - set pkgdesc [join [lrange $splitline 1 end]] - puts $docfile " $pkg: $pkgdesc" - } - close $pkgfile - close $docfile - - # install fmtutil.cnf file - if {${texlive.formats} != ""} { - xinstall -d ${destroot}${texlive_texmfsysconfig}/fmtutil.d - set fmtfilename \ - ${destroot}${texlive_texmfsysconfig}/fmtutil.d/10${name}.cnf - set fmtfile [open $fmtfilename "w"] - foreach x ${texlive.formats} { - set fmtenabled [lindex $x 0] - set fmtname [lindex $x 1] - set fmtengine [lindex $x 2] - set fmtpatterns [lindex $x 3] - set fmtoptions [lindex $x 4] - if {!$fmtenabled} { - set fmtprefix "#! " - } else { - set fmtprefix "" - } - - puts $fmtfile \ - "$fmtprefix$fmtname\t$fmtengine\t$fmtpatterns\t$fmtoptions" - - # Simulate texlinks - if {[lsearch -exact ${texlive.binaries} $fmtname] != -1} { - # Decide what to link. Use the specified engine - # unless a binary with the same name as the - # format exists (this can happen for metafont; - # see #28890) - # - # It's OK if the binary named $fmtname is a broken - # symlink, since we might be installing whatever - # it's pointing to, hence the use of 'file lstat'. - if {![catch {file lstat ${texlive_bindir}/$fmtname ignore}]} { - set linksource ${texlive_bindir}/$fmtname - } else { - set linksource ${prefix}/bin/$fmtengine - } - - ln -s $linksource \ - ${destroot}${prefix}/bin/$fmtname - ln -s $linksource \ - ${destroot}${texlive_mactex_texbindir}/$fmtname - - # We've created the symlink for $fmtname; remove - # it from texlive.binaries so we don't try to do - # so again later. - texlive.binaries-delete $fmtname - } - } - - close $fmtfile - } - - # install updmap.cfg file - if {${texlive.maps} != ""} { - xinstall -d ${destroot}${texlive_texmfsysconfig}/updmap.d - set mapfilename \ - ${destroot}${texlive_texmfsysconfig}/updmap.d/10${name}.cfg - set mapfile [open $mapfilename "w"] - foreach x ${texlive.maps} { - puts $mapfile $x - } - close $mapfile - } - - # install languages.dat and languages.def files - if {${texlive.languages} != ""} { - xinstall -d ${destroot}${texlive_texmfsysconfig}/language.d - set langdatfilename \ - ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.dat - set langdeffilename \ - ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.def - set langluafilename \ - ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.dat.lua - set langdatfile [open $langdatfilename "w"] - set langdeffile [open $langdeffilename "w"] - set langluafile [open $langluafilename "w"] - - foreach x ${texlive.languages} { - set langname [lindex $x 0] - set langfile [lindex $x 1] - set langlhmin [lindex $x 2] - set langrhmin [lindex $x 3] - set langsyns [lindex $x 4] - set langpatt [lindex $x 5] - set langhyph [lindex $x 6] - set langspecial [lindex $x 7] - - puts $langdatfile "$langname $langfile" - foreach syn $langsyns { - puts $langdatfile "=$syn" - } - - foreach syn [concat $langname $langsyns] { - puts $langdeffile "\\addlanguage{$syn}{$langfile}{}{$langlhmin}{$langrhmin}" - } - - puts $langluafile "\t\['$langname'\] = {" - puts $langluafile "\t\tloader = '$langfile'," - puts $langluafile "\t\tlefthyphenmin = $langlhmin," - puts $langluafile "\t\trighthyphenmin = $langrhmin," - set qsyns {} - foreach syn $langsyns { - lappend qsyns "'$syn'" - } - set qsynlist [join $qsyns ", "] - puts $langluafile "\t\tsynonyms = { $qsynlist }," - if {$langpatt != ""} { - puts $langluafile "\t\tpatterns = '$langpatt'," - } - if {$langhyph != ""} { - puts $langluafile "\t\thyphenation = '$langhyph'," - } - if {$langspecial != ""} { - puts $langluafile "\t\tpatterns = '$langspecial'," - } - puts $langluafile "\t},\n" - } - - close $langdatfile - close $langdeffile - close $langluafile - } - - # create symlinks for any binaries activated by the port - foreach bin ${texlive.binaries} { - ln -s ${texlive_bindir}/$bin ${destroot}${prefix}/bin - ln -s ${texlive_bindir}/$bin ${destroot}${texlive_mactex_texbindir} - } - } - - post-activate { - # Disable mktexlsr if it's not installed and this is a - # texlive-documentation-* port. It's possible (if unlikely) to - # install them without texlive-basic, so mktexlsr might not - # exist, but if it does we do want to run it. - if {[regexp {^texlive-documentation-} $name] && - ![file exists ${prefix}/bin/mktexlsr]} { - texlive.use_mktexlsr no - } - - if {${texlive.use_mktexlsr}} { - texlive.mktexlsr - } - - if {${texlive.forceupdatecnf}} { - # If force was specified, update all the config files, and - # regenerate all maps and formats. - system "${prefix}/libexec/texlive-update-cnf language.dat" - system "${prefix}/libexec/texlive-update-cnf language.def" - system "${prefix}/libexec/texlive-update-cnf language.dat.lua" - system "${prefix}/libexec/texlive-update-cnf updmap.cfg" - system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf" - system "${prefix}/bin/updmap-sys" - # format generation might fail if we are in the middle of - # a major upgrade and have not yet updated all texlive ports. - # Catch the error to prevent the upgrade from failing. - catch {system "${prefix}/bin/fmtutil-sys --all"} - } else { - # Otherwise, only update the config files that are - # actually affected, and only generate the needed - # formats. - if {${texlive.languages} != ""} { - system "${prefix}/libexec/texlive-update-cnf language.dat" - system "${prefix}/libexec/texlive-update-cnf language.def" - system "${prefix}/libexec/texlive-update-cnf language.dat.lua" - } - if {${texlive.maps} != ""} { - system "${prefix}/libexec/texlive-update-cnf updmap.cfg" - system "${prefix}/bin/updmap-sys" - } - if {${texlive.formats} != ""} { - system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf" - } - - # Regenerate formats. If we installed any hyphenation - # patterns, then we need to regenerate all - # formats. Otherwise, just generate the formats we just - # installed. - if {${texlive.languages} != ""} { - catch {system "${prefix}/bin/fmtutil-sys --all"} - } elseif {${texlive.formats} != ""} { - foreach x ${texlive.formats} { - set fmtname [lindex $x 1] - catch {system "${prefix}/bin/fmtutil-sys --byfmt $fmtname"} - } - } - } - } - - post-deactivate { - # Disable mktexlsr if it's not installed and this is a - # texlive-documentation-* port. See post-activate for why. - if {[regexp {^texlive-documentation-} $name] && - ![file exists ${prefix}/bin/mktexlsr]} { - texlive.use_mktexlsr no - } - - # Update ls-R and any config files to reflect that the package - # is now gone - if {${texlive.use_mktexlsr} && ${texlive.use_mktexlsr_on_deactivate}} { - texlive.mktexlsr - } - if {${texlive.forceupdatecnf} || ${texlive.languages} != ""} { - system "${prefix}/libexec/texlive-update-cnf language.dat" - system "${prefix}/libexec/texlive-update-cnf language.def" - system "${prefix}/libexec/texlive-update-cnf language.dat.lua" - } - if {${texlive.forceupdatecnf} || ${texlive.maps} != ""} { - system "${prefix}/libexec/texlive-update-cnf updmap.cfg" - } - if {${texlive.forceupdatecnf} || ${texlive.formats} != ""} { - system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf" - } - - # Remove any generated format files - foreach x ${texlive.formats} { - set fmtname [lindex $x 1] - set fmtengine [lindex $x 2] - switch $fmtengine { - "mf" - - "mf-nowin" {set fmtengine "metafont"} - "mpost" {set fmtengine "metapost"} - } - - foreach filename [glob -nocomplain ${texlive_texmfsysvar}/web2c/$fmtengine/$fmtname.*] { - delete $filename - } - } - } -}