November 2007 - macports-dev - lists.macosforge.org

1.6.0 sometime late next week
by Juan Manuel Palacios 25 Nov '07

25 Nov '07

Some changes have been made to the release_1_6 branch since rc2 was tagged, but none that affects any structural behavior of our sources and as such risks the introduction of new bugs. Therefore I think we should be good to go with branches/release_1_6 ToT (plus any small modifications that might be made to trunk, like my work on PortIndex2MySQL) for release of 1.6.0 sometime late next week, as I manage to coordinate with Bill to replace the old website and roll live the new one. Nothing has been reported against 1.6.0-rc2, as far as I've been able to see (please do correct me if I'm wrong), so I think this is a good schedule; I'd do it sooner, but I'm a bit short of time at the moment. Speak up if you have any concerns. Regards,... -jmpp

5 11

Trac 500 Internal Server Error attaching files sometimes
by Ryan Schmidt 24 Nov '07

24 Nov '07

I'm trying to attach files to tickets I made (#13397, #13398) and it's taking a long time, then eventually timing out with this and not attaching the file: > Internal Server Error > > The server encountered an internal error or misconfiguration and > was unable to complete your request. > > Please contact the server administrator, admin(a)macosforge.org and > inform them of the time the error occurred, and anything you might > have done that may have caused the error. > > More information about this error may be available in the server > error log. > I waited awhile and retried and then I could attach the initial file to both tickets. Then some minutes later I tryied to attach revisions and it failed again. After a few minutes it worked again. Not sure what's going on.

1 0

cclient & imap-uw
by Bjarne D Mathiesen 24 Nov '07

24 Nov '07

The source has been upgraded to 2006k Attached new Portfiles -- Bjarne D Mathiesen København N ; Danmark ; Europa ---------------------------------------------------------------------- denne besked er skrevet i et totalt M$-frit miljø # $Id: Portfile 26044 2007-06-10 00:57:23Z pguyot(a)kallisys.net $ PortSystem 1.0 name cclient version 2006k categories mail maintainers pguyot(a)kallisys.net description UW IMAP c-client library long_description \ C-client is a common API for accessing mailboxes. It is \ used internally by the popular PINE mail reader as well as the \ University of Washington's IMAP server. homepage http://www.washington.edu/imap/ platforms darwin master_sites ftp://ftp.cac.washington.edu/imap/ \ ftp://ftp.cac.washington.edu/imap/old/ \ macports:pguyot extract.suffix .tar.Z distname imap-${version} dist_subdir imap-uw worksrcdir imap-${version} checksums md5 3a98066870fb8075c744079309e379c8 depends_lib port:openssl \ lib:libz:zlib \ lib:libgssapi_krb5:kerberos5 use_configure no post-patch { cd ${worksrcpath} reinplace "s|/System/Library/OpenSSL SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib|${prefix}/etc/openssl SSLINCLUDE=${prefix}/include SSLLIB=${prefix}/lib|g" Makefile reinplace "s| -Wno-pointer-sign||g" src/osdep/unix/Makefile } build.target oxp EXTRACFLAGS=-fno-common variant ssl_plaintext { patchfiles patch-Makefile build.args SSLTYPE=unix } destroot { xinstall -m 755 -d ${destroot}${prefix}/include/c-client xinstall -m 644 -W ${worksrcpath}/c-client \ c-client.h dummy.h env.h env_unix.h fdstring.h flockcyg.h flocksim.h \ flstring.h fs.h ftl.h imap4r1.h linkage.c linkage.h mail.h \ misc.h netmsg.h newsrc.h nl.h nntp.h osdep.h \ pseudo.h rfc822.h smtp.h sslio.h tcp.h tcp_unix.h unix.h \ utf8.h utf8aux.h \ ${destroot}${prefix}/include/c-client xinstall -m 644 ${worksrcpath}/c-client/c-client.a \ ${destroot}${prefix}/lib/libc-client4.a system "cd ${destroot}${prefix}/lib/ && ranlib libc-client4.a" } livecheck.check regex livecheck.url http://www.washington.edu/imap/documentation/RELNOTES.html livecheck.regex {imap-(\w+)} # $Id: Portfile 30236 2007-10-22 23:15:10Z jmpp(a)macports.org $ PortSystem 1.0 name imap-uw version 2006k categories mail maintainers nomaintainer description University of Washington IMAP daemon long_description IMAP (Internet Message Access Protocol) is a method \ of accessing electronic messages kept on a (possibly \ shared) mail server. This port provides the \ University of Washington IMAP toolkit (IMAP \ supporting software developed by the UW). homepage http://www.washington.edu/imap/ master_sites ftp://ftp.cac.washington.edu/imap/ \ ftp://ftp.cac.washington.edu/imap/old/ \ opendarwin platforms darwin distname imap-${version} extract.suffix .tar.Z checksums md5 3a98066870fb8075c744079309e379c8 use_configure no build.target oxp # Patches for Darwin 7.x/Mac OS X 10.3.x support platform darwin 7 { patchfiles patch-src-osdep-unix-Makefile \ patch-src-osdep-unix-ckp_osx.c } # Default is to enable SSL support and plaintext authentication # permitted only in SSL/TLS sessions. # Variant to enable SSL support and plaintext authentication variant ssl_plain { patchfiles patch-Makefile build.args SSLTYPE=unix } # Variant to enable SSL with PAM support for Mac OS X variant ssl_pam { depends_lib lib:libssl.0.9:openssl patchfiles patch-Makefile build.target oxp build.args SSLTYPE=unix post-destroot { xinstall -m 0644 ${filespath}/README-MACOSX \ ${filespath}/etc-pam.d-imap \ ${filespath}/etc-xinetd.d-imap \ ${filespath}/etc-xinetd.d-imaps \ ${destroot}${prefix}/share/doc/${name}/ reinplace "s|__PREFIX|${prefix}|" \ ${filespath}/README-MACOSX \ ${destroot}${prefix}/share/doc/${name}/etc-xinetd.d-imap \ ${destroot}${prefix}/share/doc/${name}/etc-xinetd.d-imaps ui_msg "-----------------------------------------------------------" ui_msg "For use of IMAP-UW using SSL and PAM on Mac OS X 10.3," ui_msg "please see the following:" ui_msg "\t${prefix}/share/doc/${name}/README-MACOSX" ui_msg "for further installation and setup details." ui_msg "-----------------------------------------------------------" } } # Variant to enable IPv6 support (default is IPv4) variant ipv6 { build.args-append IP=6 } # Variant to disable plaintext authentication outside of SSL/TSL # i.e. prohibit unencrypted plaintext passwords variant nopwd { build.args-delete SSLTYPE=unix build.args-append SSLTYPE=unix.nopwd } # Variant to set the default for creating new mailboxes to "mbx" format variant mbx { build.args-append CREATEPROTO=mbxproto } # Variant to set the default mail subdirectory name to "Mail" variant subdir { patchfiles-append patch-env_unix.c } destroot { # Warn user if not running as root if {$env(USER) != "root"} { ui_msg "-----------------------------------------------------------" ui_msg "Note that you are not running as root, so files installed" ui_msg "by this port will not end up with proper ownership and" ui_msg "will likely not work correctly." ui_msg "-----------------------------------------------------------" } cd ${worksrcpath} xinstall -m 0755 -d ${destroot}${prefix}/libexec xinstall -m 0755 -d ${destroot}${prefix}/bin xinstall -m 0755 -d ${destroot}${prefix}/share/doc/${name} xinstall -m 0755 -d ${destroot}${prefix}/share/man/man8 xinstall -m 0755 -d ${destroot}${prefix}/share/man/man1 xinstall -m 0755 imapd/imapd ${destroot}${prefix}/libexec xinstall -m 0755 ipopd/ipop2d ${destroot}${prefix}/libexec xinstall -m 0755 ipopd/ipop3d ${destroot}${prefix}/libexec xinstall -m 0755 mailutil/mailutil ${destroot}${prefix}/bin xinstall -m 0755 tmail/tmail ${destroot}${prefix}/bin xinstall -m 0755 dmail/dmail ${destroot}${prefix}/bin xinstall -m 0755 mtest/mtest ${destroot}${prefix}/bin/mboxtest if {$env(USER) == "root"} { xinstall -g mail -m 2711 mlock/mlock ${destroot}${prefix}/libexec } else { xinstall -m 0711 mlock/mlock ${destroot}${prefix}/libexec } xinstall -m 0755 src/imapd/imapd.8 ${destroot}${prefix}/share/man/man8 xinstall -m 0755 src/ipopd/ipopd.8 ${destroot}${prefix}/share/man/man8 xinstall -m 0755 src/mailutil/mailutil.1 ${destroot}${prefix}/share/man/man1 xinstall -m 0755 src/tmail/tmail.1 ${destroot}${prefix}/share/man/man1 xinstall -m 0755 src/dmail/dmail.1 ${destroot}${prefix}/share/man/man1 xinstall -m 0644 docs/RELNOTES ${destroot}${prefix}/share/doc/${name} xinstall -m 0644 docs/FAQ.html ${destroot}${prefix}/share/doc/${name} foreach file [glob docs/*.txt] { xinstall -m 0644 ${file} ${destroot}${prefix}/share/doc/${name} } }

2 1

[RFC] universal variants and python portgroup
by Adam Mercer 24 Nov '07

24 Nov '07

Hi As the default universal variant only works with configure based ports it will therefore not work with ports using the python portgroups e.g.: $ port variants py25-boto py25-boto has the variants: universal $ sudo port install py25-boto +universal Error: Error executing universal: Default universal variant only works with ports based on configure Error: Unable to open port: Error evaluating variants $ As expected adding "universal_variant no" to the Portfile removes the universal variant. But as all ports using the python portgroups with not be configure based (by default) could this "universal_variant no" be added to the portgroup? I've had this line in my local python portgroups for the past day or so with no adverse effects, but would be interested in hearing what people who understand base much better than I have to say on this? Could this cause any unforeseen effects? Cheers Adam

2 3

ettercap-ng & macports
by Bjarne D Mathiesen 24 Nov '07

24 Nov '07

port install ettecap-ng wouldn't work for me. I found this http://ettercap.sourceforge.net/forum/viewtopic.php?t=5002 which exactly described my problem. Based upon that information, I created a patch file and a new Portfile which I've both enclosed. Ettercap-ng now compiles on my TiBook 1GHz -- Bjarne D Mathiesen København N ; Danmark ; Europa ---------------------------------------------------------------------- denne besked er skrevet i et totalt M$/-frit miljø --- src/interfaces/curses/widgets/wdg.h.orig 2005-05-27 17:11:45.000000000 +0200 +++ src/interfaces/curses/widgets/wdg.h 2007-11-15 10:15:05.000000000 +0100 @@ -11,8 +11,9 @@ #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <string.h> +#include <sys/types.h> #ifdef OS_WINDOWS #include <windows.h> #endif # $Id: Portfile 20339 2006-11-02 00:52:17Z blair(a)macports.org $ PortSystem 1.0 name ettercap-ng version 0.7.3 categories net security maintainers ultrix(a)gmail.com description multipurpose sniffer/interceptor/logger for switched LAN long_description \ Ettercap is a multi-functional packet sniffer/interceptor/logger \ that works on switched LANs. It allows the active and passive \ dissection of numerous protocols, including ciphered ones, such as \ SSH1, and includes features for network and host analysis. Four \ modes are available: IP Based, MAC Address Based, ARP Based, and \ PublicARP Based. homepage http://ettercap.sourceforge.net/ platforms darwin freebsd master_sites sourceforge:ettercap distname ettercap-NG-${version} checksums md5 28fb15cd024162c55249888fe1b97820 patchfiles patch-src-Makefile.in \ patch-configure \ patch-src-interfaces-curses-widgets-wdg.h depends_lib port:openssl \ port:libpcap \ port:libnet11 \ lib:libpcre.0:pcre configure.args --disable-gtk \ --disable-plugins \ --with-openssl=${prefix} \ --with-libpcap=${prefix} \ --with-libnet=${prefix} \ --with-libpcre=${prefix} \ --mandir=\\\${prefix}/share/man \ --infodir=\\\${prefix}/share/info variant gtk { depends_lib-append lib:libglib.2:glib2 \ lib:libgtk.2:gtk2 configure.args-delete --disable-gtk configure.args-append --enable-gtk } variant plugins { configure.args-delete --disable-plugins configure.args-append --enable-plugins }

1 0

Re: [31448] trunk/dports/mail/t-prot/Portfile
by Simon Ruderich 24 Nov '07

24 Nov '07

On Sat, Nov 24, 2007 at 04:59:11AM -0800, simon(a)macports.org wrote: > Revision: 31448 > http://trac.macosforge.org/projects/macports/changeset/31448 > Author: simon(a)macports.org > Date: 2007-11-24 04:59:01 -0800 (Sat, 24 Nov 2007) > > Log Message: > ----------- > mail/t-prot: Whitespace only change to follow conventions. > > Modified Paths: > -------------- > trunk/dports/mail/t-prot/Portfile I also removed the cd command to make it work with macports 1.6. I forgot to add this to the commit log. Simon -- + privacy is necessary + using http://gnupg.org + public key id: 0x6115F804EFB33229

3 6

Re: [31068] trunk/dports/net
by Ryan Schmidt 24 Nov '07

24 Nov '07

On Nov 15, 2007, at 02:29, source_changes(a)macosforge.org wrote: > Revision: 31068 > http://trac.macosforge.org/projects/macports/changeset/31068 > Author: saispo(a)macports.org > Date: 2007-11-15 00:29:39 -0800 (Thu, 15 Nov 2007) > > Log Message: > ----------- > Add pidgin-encryption from trac tickets #13311 > > Added Paths: > ----------- > trunk/dports/net/pidgin-encryption/ > trunk/dports/net/pidgin-encryption/Portfile > > Added: trunk/dports/net/pidgin-encryption/Portfile > =================================================================== > --- trunk/dports/net/pidgin-encryption/ > Portfile (rev 0) > +++ trunk/dports/net/pidgin-encryption/Portfile 2007-11-15 08:29:39 > UTC (rev 31068) > @@ -0,0 +1,29 @@ > +# $Id$ > +PortSystem 1.0 > +name pidgin-encryption > +version 3.0 > +categories net > +maintainers rsync(a)reifferscheid.org > +description Pidgin encryption plugin > +depends_lib port:nss port:pidgin > + > +long_description ${description} > +configure.args --prefix=${prefix} \ No need to say "--prefix=${prefix}"; MacPorts includes that in configure.pre_args automatically for all ports. > + --with-nss-includes=${prefix}/include/nss \ > + --with-nss-libs=${prefix}/lib \ > + --with-nspr-includes=${prefix}/include/nspr \ > + --with-nspr-libs=${prefix}/lib > + > +homepage http://pidgin-encrypt.sourceforge.net/ > +master_sites http://downloads.sourceforge.net/pidgin-encrypt/ I think "master_sites sourceforge" would be sufficient, wouldn't it? > +checksums pidgin-encryption-3.0.tar.gz md5 > 3f3f8e9a15d19e084d54bfbbd2db9d77 No need to say the distfile name, if this is the only file being downloaded. Just do "checksums md5 3f3f8e9a15d19e084d54bfbbd2db9d77". > +worksrcdir ${worksrcpath} What's this for? > +build {system "cd ${worksrcdir} && make"} What was unsatisfactory about the usual build command? > +destroot { > + xinstall -m 755 -d ${destroot}${prefix}/lib/pidgin/ No need to say "-m 755"; that's the default for directories anyway. > + eval xinstall -m 755 ${worksrcpath}/.libs/encrypt.so $ > {destroot}${prefix}/lib/pidgin/ > + eval xinstall -m 755 ${worksrcpath}/.libs/encrypt.la $ > {destroot}${prefix}/lib/pidgin/ > +} Why "eval"? This could be more easily written as a single command, right? xinstall -m 755 -W ${worksrcpath}/.libs encrypt.so encrypt.la $ {destroot}${prefix}/lib/pidgin

1 0

Python 2.5
by Randall Wood 24 Nov '07

24 Nov '07

Can we get resolution, if only by reverting the port to version 2.5.1_2, quickly. I have a ton of ports that depend, indirectly, on python 2.5 and the installations for all of them are crapping out on python 2.5 (version 2.5.1_3). See these tickets: http://trac.macosforge.org/projects/macports/ticket/13377 http://trac.macosforge.org/projects/macports/ticket/13322 Randall Wood rhwood(a)mac.com http://shyramblings.blogspot.com "The rules are simple: The ball is round. The game lasts 90 minutes. All the rest is just philosophy."

2 1

Merging my doc test branch into doc-new
by Simon Ruderich 24 Nov '07

24 Nov '07

Hi all, as Mark and I think the doc test branch is ready, I tried to merge it back into doc-new. But I had no success. I tried it with "svn merge -r 31208:31436 http://svn.macports.org/repository/macports/branches/simon-doc-test/doc-new". What am I doing wrong? Thanks for your help, Simon -- + privacy is necessary + using http://gnupg.org + public key id: 0x6115F804EFB33229

2 2

Re: [31441] trunk/dports/lang/eiffelstudio/Portfile
by Ryan Schmidt 24 Nov '07

24 Nov '07

On Nov 24, 2007, at 02:49, jann(a)macports.org wrote: > -distname PorterPackage_60_${minor_version} > +distname PorterPackage_61_${minor_version} > - set env(ISE_EIFFEL) ${worksrcpath}/Eiffel60 > + set env(ISE_EIFFEL) ${worksrcpath}/Eiffel61 > - file attributes ${worksrcpath}/Eiffel60/studio/ > spec/$env(ISE_PLATFORM)/bin/ec -permissions 0755 > + file attributes ${worksrcpath}/Eiffel61/studio/ > spec/$env(ISE_PLATFORM)/bin/ec -permissions 0755 > - system "tar -xjf ${distpath}/${eiffel_launch} - > C ${worksrcpath}/Eiffel60/" > + system "tar -xjf ${distpath}/${eiffel_launch} - > C ${worksrcpath}/Eiffel61/" > - file copy ${worksrcpath}/Eiffel60 ${destroot}/$ > {prefix}/ > + file copy ${worksrcpath}/Eiffel61 ${destroot}/$ > {prefix}/ > - system "ranlib ${destroot}/${prefix}/Eiffel60/ > studio/spec/$env(ISE_PLATFORM)/lib/*.a" > + system "ranlib ${destroot}/${prefix}/Eiffel61/ > studio/spec/$env(ISE_PLATFORM)/lib/*.a" > - export ISE_EIFFEL=${prefix}/Eiffel60 \n\ > + export ISE_EIFFEL=${prefix}/Eiffel61 \n\ The attached patch may make your life easier... Fewer things to update when a new major version rolls around...

1 0