Why'd you change the copyright line to use @opendarwin.org instead of @macports.org? On Jun 17, 2007, at 3:13 PM, source_changes@macosforge.org wrote:
Revision 26266 Author yves@macports.org Date 2007-06-17 15:13:54 -0700 (Sun, 17 Jun 2007) Log Message
gnustep portgroup for gnustep-make-2.0 Modified Paths
trunk/base/src/port1.0/resources/group/gnustep-1.0.tcl Diff
Modified: trunk/base/src/port1.0/resources/group/gnustep-1.0.tcl (26265 => 26266)
--- trunk/base/src/port1.0/resources/group/gnustep-1.0.tcl 2007-06-17 22:08:24 UTC (rev 26265) +++ trunk/base/src/port1.0/resources/group/gnustep-1.0.tcl 2007-06-17 22:13:54 UTC (rev 26266) @@ -3,7 +3,7 @@ # # $Id$ # -# Copyright (c) 2006 Yves de Champlain <yves@macports.org>, +# Copyright (c) 2006 Yves de Champlain <yves@opendarwin.org>, # All rights reserved. # # Redistribution and use in source and binary forms, with or without @@ -32,14 +32,19 @@ # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #
+# # Group code for GNUstep ports. +#
# -# Overview of gnustep 1.0 PortGroup +# Overview of gnustep 1.0 PortGroup : # + +# # default categories gnustep # default homepage http://www.gnustep.org/ # default master_sites gnustep:core +# default depends_lib port:gnustep-core # # array set gnustep.post_flags Apple CC two-level namespaces requires all # symbols to be resolved at link time, @@ -52,140 +57,181 @@ # BundleSubDir "-lfoo -lbar" # } # } -# +# +# +# proc set_gnustep_make Sets GNUSTEP_MAKEFILES +# according to the FilesystemLayout +# +# proc set_gnustep_env Sets DYLD_LIBRARY_PATH and PATH +# for the gnustep FilesystemLayout +# +# +# default gnustep.cc CC=gcc-dp-4.2 +# # default use_configure no -# default configure.args CC=gcc-mp-4.1 +# default configure.env Sets the environment for the gnustep FilesystemLayout +# configure.pre_args-append ${gnustep.cc} [set_gnustep_make]" # +# default build.env {[set_gnustep_env]} # default build.type gnu -# default build.args messages=yes +# build.pre_args-append "messages=yes [set_gnustep_make]" # -# default gnustep.domain As provided by the current package or Local -# default destroot.args messages=yes -# default destroot.destdir GNUSTEP_INSTALLATION_DIR=$ {destroot}${prefix}/GNUstep/$gnustep.domain -# variant with_docs GNUstep programs providing documentation should -# all follow the same pattern +# default destroot.env {[set_gnustep_env]} +# destroot.pre_args-append "messages=yes [set_gnustep_make] [set_gnustep_domain]" # +# variant with_docs Most GNUstep programs providing documentation +# follow the same pattern +#
+# +# GNUstep utilities +#
-# Options this group provides : +# +# Adds SHARED_LD_POSTFLAGS for Darwin's linker +# +# Sets GNUSTEP_INSTALLATION_DOMAIN for ports using the +# deprecated GNUSTEP_SYSTEM_ROOT variable +#
-options gnustep.domain -default gnustep.domain "" +array set gnustep.post_flags {}
-# Default values for this group : - -default categories gnustep -default homepage http://www.gnustep.org/ - -default master_sites gnustep:core -default depends_build port:gnustep-make -default depends_lib port:gnustep-back - -default use_configure no -default configure.args CC=gcc-mp-4.1 - -default build.type gnu -default build.args messages=yes - -default destroot.args messages=yes - - -# for Darwin's linker - -array set gnustep.post_flags {} post-patch { foreach {src_subdir post_libs} [array get gnustep.post_flags] { set fl [ open ${worksrcpath}/$src_subdir/ GNUmakefile.preamble a ] puts $fl "\nSHARED_LD_POSTFLAGS += $post_libs" close $fl } + foreach gmf [glob -nocomplain -directory ${worksrcpath} GNUmakefile*] { + reinplace \ + "s|GNUSTEP_INSTALLATION_DIR = \$\(GNUSTEP_SYSTEM_ROOT \)|GNUSTEP_INSTALLATION_DOMAIN=SYSTEM|g" \ + $gmf + } }
-# try to guess installation directory if not specified in the Portfile -# defaults to Local +# +# Returns true (1) if current file layout is gnustep +# Returns false (0) otherwise +#
-proc set_gnustep_domain {} { - global gnustep.domain worksrcpath +proc gnustep_layout {} { + global prefix
- if {${gnustep.domain} == ""} { - set gnustep.domain Local - ui_debug "No gnustep.domain provided" - if {[file exists $worksrcpath/GNUmakefile]} { - set root_makefile "GNUmakefile" - } elseif {[file exists $worksrcpath/GNUmakefile.in]} { - set root_makefile "GNUmakefile.in" - } else { - ui_debug "no GNUmakefile ? ... hum !" - return 1 - } - ui_debug "Checking installation directory in $worksrcpath/ $root_makefile" - set fl [open "| grep \"^GNUSTEP_INSTALLATION_DIR = \" $worksrcpath/$root_makefile"] - set data [read $fl] - if {! [catch {close $fl} err] && [regexp SYSTEM $data]} { - ui_debug "Data read : $data" - set gnustep.domain System - } else { - ui_debug "$err" - } + if {[file exists ${prefix}/GNUstep/System/Library/Makefiles]} { + return 1 } - ui_debug "Using ${gnustep.domain}" + return 0 }
+# +# Sets GNUSTEP_SYSTEM_LIBRARY according to the FilesystemLayout +#
-# GNUstep stages commands +proc set_system_library {} { + global prefix + + if {[gnustep_layout]} { + return "${prefix}/GNUstep/System/Library" + } + return "${prefix}/lib/GNUstep" +}
-configure { - if { ${use_configure} == "yes" } { - cd ${worksrcpath} - ui_debug "./configure ${configure.pre_args} $ {configure.args}" - system "\ - . ${prefix}/GNUstep/System/Library/Makefiles/GNUstep.sh \ - && \ - ./configure ${configure.pre_args} ${configure.args}" +# +# Sets GNUSTEP_LOCAL_LIBRARY according to the FilesystemLayout +# + +proc set_local_library {} { + global prefix + + if {[gnustep_layout]} { + return "${prefix}/GNUstep/Local/Library" } + return "${prefix}/lib/GNUstep" } + +# +# Sets GNUSTEP_MAKEFILES according to the FilesystemLayout +# + +proc set_gnustep_make {} { + global prefix
-build { - cd ${worksrcpath} - ui_debug "${build.cmd} ${build.target} ${build.args}" - system "\ - . ${prefix}/GNUstep/System/Library/Makefiles/GNUstep.sh \ - && \ - ${build.cmd} ${build.target} ${build.args}" + if {[gnustep_layout]} { + return "GNUSTEP_MAKEFILES=${prefix}/GNUstep/System/Library/ Makefiles" + } + return "GNUSTEP_MAKEFILES=${prefix}/share/GNUstep/Makefiles" }
-destroot { - set_gnustep_domain - set destroot.destdir \ - GNUSTEP_INSTALLATION_DIR=${destroot}${prefix}/GNUstep/$ {gnustep.domain} - cd ${worksrcpath} - ui_debug "${destroot.cmd} ${destroot.target} \ - ${destroot.args} ${destroot.destdir}" - system "\ - . ${prefix}/GNUstep/System/Library/Makefiles/GNUstep.sh \ - && \ - ${destroot.cmd} ${destroot.target} \ - ${destroot.args} ${destroot.destdir}" +# +# Sets DYLD_LIBRARY_PATH and PATH for the gnustep FilesystemLayout +# + +proc set_gnustep_env {} { + global env prefix + + if {[gnustep_layout]} { + return "\ + DYLD_LIBRARY_PATH=${prefix}/GNUstep/Local/Library/ Libraries:${prefix}/GNUstep/System/Library/Libraries \ + PATH=${prefix}/GNUstep/Local/Tools:${prefix}/GNUstep/ System/Tools:$env(PATH) \ + " + } + return }
+# +# Options this group provides : +# + +options gnustep.cc +default gnustep.cc CC=gcc-mp-4.2 + +options system_library +options local_library +default system_library [set_system_library] +default local_library [set_local_library] + +# +# Default values for this group : +# + +default categories gnustep +default homepage http://www.gnustep.org/ + +default master_sites gnustep:core +default depends_lib port:gnustep-core + +default use_configure no +default configure.env {[set_gnustep_env]} +configure.pre_args-append "${gnustep.cc} [set_gnustep_make]" + +default build.env {[set_gnustep_env]} +default build.type gnu +build.pre_args-append "messages=yes [set_gnustep_make]" + +default destroot.env {[set_gnustep_env]} +destroot.pre_args-append "messages=yes [set_gnustep_make]" + +# # To build and install documentation provided by the port +#
variant with_docs { - depends_build-append \ - bin:latex2html:latex2html \ - bin:texi2pdf:texinfo \ - bin:texi2html:texi2html \ - bin:pdftex:teTeX \ - port:gnustep-base + depends_build-append bin:latex2html:latex2html \ + bin:texi2pdf:texinfo \ + bin:texi2html:texi2html \ + bin:pdftex:teTeX \ + port:gnustep-base + post-destroot { + if {[file exists ${worksrcpath}/Documentation/GNUmakefile]} { + ui_msg "---> Making Documentation for ${name}" + cd ${worksrcpath}/Documentation - system "\ - . ${prefix}/GNUstep/System/Library/Makefiles/ GNUstep.sh \ - && \ - ${destroot.cmd} ${destroot.target} \ - ${destroot.args} ${destroot.destdir}" + system "${destroot.env} ${destroot.cmd} \ + ${destroot.pre_args} ${destroot.destdir}" + set info_dir \ ${destroot}${prefix}/GNUstep/System/Library/ Documentation/info if {[file exists ${info_dir}/manual.info]} { _______________________________________________ macports-changes mailing list macports-changes@lists.macosforge.org http://lists.macosforge.org/mailman/listinfo/macports-changes
-- Kevin Ballard http://kevin.sb.org kevin@sb.org http://www.tildesoft.com -- Kevin Ballard http://kevin.sb.org eridius@macports.org http://www.tildesoft.com