November 2008 - macports-tickets - lists.macosforge.org

[MacPorts] #16290: Mono-1.9.1 not building on PPC 10.5.4
by MacPorts 11 Nov '08

11 Nov '08

#16290: Mono-1.9.1 not building on PPC 10.5.4 -----------------------------------------+---------------------------------- Reporter: psychotic.anomaly(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -----------------------------------------+---------------------------------- ---> Building mono with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-1.9.1" && make all " returned error 2 Command output: darwin_stop_world.c:259: error: 'ppc_thread_state_t' has no member named '__r6' darwin_stop_world.c:260: error: 'ppc_thread_state_t' has no member named '__r7' darwin_stop_world.c:261: error: 'ppc_thread_state_t' has no member named '__r8' darwin_stop_world.c:262: error: 'ppc_thread_state_t' has no member named '__r9' darwin_stop_world.c:263: error: 'ppc_thread_state_t' has no member named '__r10' darwin_stop_world.c:264: error: 'ppc_thread_state_t' has no member named '__r11' darwin_stop_world.c:265: error: 'ppc_thread_state_t' has no member named '__r12' darwin_stop_world.c:266: error: 'ppc_thread_state_t' has no member named '__r13' darwin_stop_world.c:267: error: 'ppc_thread_state_t' has no member named '__r14' darwin_stop_world.c:268: error: 'ppc_thread_state_t' has no member named '__r15' darwin_stop_world.c:269: error: 'ppc_thread_state_t' has no member named '__r16' darwin_stop_world.c:270: error: 'ppc_thread_state_t' has no member named '__r17' darwin_stop_world.c:271: error: 'ppc_thread_state_t' has no member named '__r18' darwin_stop_world.c:272: error: 'ppc_thread_state_t' has no member named '__r19' darwin_stop_world.c:273: error: 'ppc_thread_state_t' has no member named '__r20' darwin_stop_world.c:274: error: 'ppc_thread_state_t' has no member named '__r21' darwin_stop_world.c:275: error: 'ppc_thread_state_t' has no member named '__r22' darwin_stop_world.c:276: error: 'ppc_thread_state_t' has no member named '__r23' darwin_stop_world.c:277: error: 'ppc_thread_state_t' has no member named '__r24' darwin_stop_world.c:278: error: 'ppc_thread_state_t' has no member named '__r25' darwin_stop_world.c:279: error: 'ppc_thread_state_t' has no member named '__r26' darwin_stop_world.c:280: error: 'ppc_thread_state_t' has no member named '__r27' darwin_stop_world.c:281: error: 'ppc_thread_state_t' has no member named '__r28' darwin_stop_world.c:282: error: 'ppc_thread_state_t' has no member named '__r29' darwin_stop_world.c:283: error: 'ppc_thread_state_t' has no member named '__r30' darwin_stop_world.c:284: error: 'ppc_thread_state_t' has no member named '__r31' make[3]: *** [darwin_stop_world.lo] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/16290> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

Re: [MacPorts] #12801: default paths are incorrect for perl5 portgroup
by MacPorts 11 Nov '08

11 Nov '08

#12801: default paths are incorrect for perl5 portgroup ----------------------------------+----------------------------------------- Reporter: vinc17(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.5.2 Resolution: | Keywords: Port: p5-math-mpfr | ----------------------------------+----------------------------------------- Changes (by ryandesign(a)macports.org) * cc: ryandesign(a)macports.org (added) -- Ticket URL: <http://trac.macports.org/ticket/12801#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

Re: [MacPorts] #12801: default paths are incorrect for perl5 portgroup
by MacPorts 11 Nov '08

11 Nov '08

#12801: default paths are incorrect for perl5 portgroup ----------------------------------+----------------------------------------- Reporter: vinc17(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.5.2 Resolution: | Keywords: Port: p5-math-mpfr | ----------------------------------+----------------------------------------- Changes (by ryandesign(a)macports.org) * port: => p5-math-mpfr Comment: Do you still see this problem with the current version of MacPorts, mpfr, p5-math-mpfr? It seems to build fine for me without those two lines. -- Ticket URL: <http://trac.macports.org/ticket/12801#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

Re: [MacPorts] #15056: Defects with macports install/uninstall/portfile/registry
by MacPorts 11 Nov '08

11 Nov '08

#15056: Defects with macports install/uninstall/portfile/registry --------------------------------------+------------------------------------- Reporter: lorddefinitia(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Install failure, activation failure, portfile failure Port: | --------------------------------------+------------------------------------- Description changed by ryandesign(a)macports.org: Old description: > I know little about the MacPorts structure, so I am rather helpless with > understanding what exactly the bug is. My best attempt at describing my > situation follows. > > I was attempting to upgrade macports and my installed ports the other > day, using port upgrade all, not realizing that all meant all possible > ports. I cancelled the process a couple hours(I went away to do other > tasks) later, when my hard drive was nearly full, and performed port > clean all to attempt to clean out whatever had been left around by the > unfinished process. I then attempted a port upgrade installed, however > this command too failed due to limited HD space and the subsequent clean > operation I performed failed as well due the same reasons. As I had no > immediate space available, I resorted to manually deleting the files that > had been most recently created on the computer which I could be sure were > only macports related files. > > However after having free up my drive in this manner and later freeing it > up more through other methods, I have been getting frequents errors such > as this one: > > Error: Target org.macports.activate returned: Image error: > /opt/local/lib/libopencdk.10.0.6.dylib already exists and does not belong > to a registered port. Unable to activate port opencdk. > > or > > ---> Fetching libtasn1 > ---> Attempting to fetch libtasn1-1.3.tar.gz from > http://www.gnu.org/software/gnutls/releases/libtasn1/ > ---> Verifying checksum(s) for libtasn1 > ---> Extracting libtasn1 > ---> Configuring libtasn1 > ---> Building libtasn1 with target all > ---> Staging libtasn1 into destroot > ---> Installing libtasn1 1.3_0 > ---> Activating libtasn1 1.3_0 > Error: Target org.macports.activate returned: Registry error: libtasn1 > @1.2_0 not registered as installed. > > In addition, port list installed fails with an error like this one: > > Error: /opt/local/bin/port: port installed failed: Registry error: gnutls > @2.2.0_0 not registered as installed. > > Which I have been trying to fix by installing the uninstalled package, > which then complains a previous version is not installed and so the new > version can't be activated, or an image already exists and so it can't be > installed, or some such error. However, after I have done this, port list > installed no longer has a problem with the port that could not be > installed. > > Unfortunately this was working until I was unable to install one of these > non-installed packages due to dependencies that won't install. > > In addition, it says there is a problem with my portfile in my home > directory? New description: I know little about the MacPorts structure, so I am rather helpless with understanding what exactly the bug is. My best attempt at describing my situation follows. I was attempting to upgrade macports and my installed ports the other day, using port upgrade all, not realizing that all meant all possible ports. I cancelled the process a couple hours(I went away to do other tasks) later, when my hard drive was nearly full, and performed port clean all to attempt to clean out whatever had been left around by the unfinished process. I then attempted a port upgrade installed, however this command too failed due to limited HD space and the subsequent clean operation I performed failed as well due the same reasons. As I had no immediate space available, I resorted to manually deleting the files that had been most recently created on the computer which I could be sure were only macports related files. However after having free up my drive in this manner and later freeing it up more through other methods, I have been getting frequents errors such as this one: {{{ Error: Target org.macports.activate returned: Image error: /opt/local/lib/libopencdk.10.0.6.dylib already exists and does not belong to a registered port. Unable to activate port opencdk. }}} or {{{ ---> Fetching libtasn1 ---> Attempting to fetch libtasn1-1.3.tar.gz from http://www.gnu.org/software/gnutls/releases/libtasn1/ ---> Verifying checksum(s) for libtasn1 ---> Extracting libtasn1 ---> Configuring libtasn1 ---> Building libtasn1 with target all ---> Staging libtasn1 into destroot ---> Installing libtasn1 1.3_0 ---> Activating libtasn1 1.3_0 Error: Target org.macports.activate returned: Registry error: libtasn1 @1.2_0 not registered as installed. }}} In addition, port list installed fails with an error like this one: {{{ Error: /opt/local/bin/port: port installed failed: Registry error: gnutls @2.2.0_0 not registered as installed. }}} Which I have been trying to fix by installing the uninstalled package, which then complains a previous version is not installed and so the new version can't be activated, or an image already exists and so it can't be installed, or some such error. However, after I have done this, port list installed no longer has a problem with the port that could not be installed. Unfortunately this was working until I was unable to install one of these non-installed packages due to dependencies that won't install. In addition, it says there is a problem with my portfile in my home directory? -- -- Ticket URL: <http://trac.macports.org/ticket/15056#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

[MacPorts] #17192: mysql-5.0.67_1 Error upgrading from 5.0.51a_0
by MacPorts 11 Nov '08

11 Nov '08

#17192: mysql-5.0.67_1 Error upgrading from 5.0.51a_0 ---------------------------------+------------------------------------------ Reporter: jeff(a)netnichols.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: upgrade | Port: mysql5 ---------------------------------+------------------------------------------ Trying to upgrade from 5.0.51a_0 has repeatedly failed for me for the last few months. I'm running OS X 10.5.5 on an Intel MBP. {{{ $ port outdated The following installed ports are outdated: mysql5 5.0.51a_0 < 5.0.67_1 $ sudo port upgrade outdated ---> Building mysql5 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_mysql5/work/mysql-5.0.67" && make all " returned error 2 Command output: Making all in Docs make[2]: Nothing to be done for `all'. Making all in cmd-line-utils Making all in libedit sh ./makelist -h ./vi.c > vi.h.tmp && \ mv vi.h.tmp vi.h ./makelist: line 81: BEGIN { printf("/* Automatically generated file, do not edit */\n"); printf("#ifndef %s\n#define %s\n", "_h_vi_c", "_h_vi_c"); } /:/ { pr = substr($2, 1, 2); if (pr == "vi" || pr == "em" || pr == "ed") { name = substr($2, 1, index($2,"(") - 1); # # XXX: need a space between name and prototype so that -fc and -fh # parsing is much easier # printf("protected el_action_t\t%s (EditLine *, int);\n", name); } } END { printf("#endif /* %s */\n", "_h_vi_c"); }: No such file or directory cat: stdout: Broken pipe make[3]: *** [vi.h] Error 127 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Unable to upgrade port: 1 }}} -- Ticket URL: <http://trac.macports.org/ticket/17192> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #17129: ldns-1.4.0
by MacPorts 11 Nov '08

11 Nov '08

#17129: ldns-1.4.0 ------------------------------------------+--------------------------------- Reporter: marius.rieder(a)durchmesser.ch | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: ------------------------------------------+--------------------------------- Upstream update and maintainer change, as discussed offline after #16022. -- Ticket URL: <http://trac.macports.org/ticket/17129> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #17123: GHC 6.10.1_0 on PPC (both MacOS 10.5 and 10.4) [hsc2hs not found]
by MacPorts 11 Nov '08

11 Nov '08

#17123: GHC 6.10.1_0 on PPC (both MacOS 10.5 and 10.4) [hsc2hs not found] ----------------------------------------+----------------------------------- Reporter: marco.comini(a)dimi.uniud.it | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: ghc hsc2hs not found | Port: ghc ----------------------------------------+----------------------------------- Below is the last excerpt from the build transcript (with the error at the bottom). I am attempting to build the GHC port on both MacOS 10.4 PPC G4 PowerBook and MacOS 10.5 PPC G5 PowerMac. {{{ Configuring hpc-0.5.0.2... cd hpc && /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_ghc/work/ghc-6.10.1/libraries /cabal-bin /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_ghc/work /ghc-bootstrap/bin/ghc /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_ghc/work/ghc-6.10.1/libraries/bootstrapping.conf build --distpref=dist-bootstrapping Preprocessing library hpc-0.5.0.2... cabal-bin: The program hsc2hs is required but it could not be found make[1]: *** [bootstrapping.conf] Error 1 make: *** [stage1] Error 2 }}} -- Ticket URL: <http://trac.macports.org/ticket/17123> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #17120: ghc 6.10.1_0 ghci without readline
by MacPorts 11 Nov '08

11 Nov '08

#17120: ghc 6.10.1_0 ghci without readline ----------------------------------------+----------------------------------- Reporter: marco.comini(a)dimi.uniud.it | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: ghc readline missing | Port: ghc ----------------------------------------+----------------------------------- I've succesfully installed the port, but unlike previous versions of GHC now ghci has no readline support (which is quite essential to me). I don't know exactly if this part of the log can help {{{ Configuring editline-0.2.1.0... ... checking for readline... no ... checking editline/readline.h usability... yes checking editline/readline.h presence... yes checking for editline/readline.h... yes ... checking for completion_matches... yes configure: error: editline not found, so this package cannot be built }}} -- Ticket URL: <http://trac.macports.org/ticket/17120> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #17070: BUG: emacs and libgdiplus use conflicting gif libraries
by MacPorts 11 Nov '08

11 Nov '08

#17070: BUG: emacs and libgdiplus use conflicting gif libraries -----------------------------------+---------------------------------------- Reporter: mcalhoun(a)macports.org | Owner: darren.bane(a)gmail.com Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: emacs -----------------------------------+---------------------------------------- emacs depends on libungif while libgdiplus depends on giflib.[[BR]] libungif and giflib can't both be installed.[[BR]] Since giflib is newer and compatible with libungif, may I humbly suggest[[BR]] that emacs use giflib as well? Attaches is a proposed fix. I also changed the dependencies form lib:: to port: in keeping with the[[BR]] MacPorts policy of not using libraries from other sources. -- Ticket URL: <http://trac.macports.org/ticket/17070> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #17176: cairo-1.8.0 patch to build on 64-bit OS X platforms
by MacPorts 11 Nov '08

11 Nov '08

#17176: cairo-1.8.0 patch to build on 64-bit OS X platforms ------------------------------+--------------------------------------------- Reporter: arcata(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: ------------------------------+--------------------------------------------- Cairo attempts to provide an interface to the ATSUI API, which isn't present in 64-bit Mac OS X. Here is a patch to #ifdef out the ATSUI code when compiling for 64-bit. This has been reported to the Cairo project's bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=15702 but they have yet to act on that patch. -- Ticket URL: <http://trac.macports.org/ticket/17176> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2