November 2008 - macports-tickets - lists.macosforge.org

[MacPorts] #16826: MacPorts fails to build dependencies during port upgrade
by MacPorts 06 Aug '09

06 Aug '09

#16826: MacPorts fails to build dependencies during port upgrade -----------------------------------+---------------------------------------- Reporter: boxerfencer(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: -----------------------------------+---------------------------------------- During both sudo port upgrade installed and sudo port upgrade oudated I get failed attempts at building: gegl ffmpeg a52dec db46 cyrus-sasl2 graphviz libsdl lua openexr ilmbase And it seemingly loops endlessly. I also get a "Error: No port gail found." after the "sudo port upgrade oudated" command. When I tried "sudo port -d sync", failed attempts diminished as in the following. Error: The following dependencies failed to build: gegl ffmpeg a52dec Error: Unable to upgrade port: 1 Interestingly, "sudo port -d selfupdate" doesn't report any problems. Details port -v reports: MacPorts 1.600 And I'm running on a Mac Book Pro running the Yonah x86 processor. You'll see a complaint about illegal ccache usage, well I deleted ccache and set "configureccache" to "no" in /opt/local/etc/macports/macports.conf and reattempted to update/upgrade and still encountered the same problem. The initial error mentioned above (first) follows. ---> Building a52dec with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_a52dec/work/a52dec-0.7.4" && make all " returned error 2 Command output: Making all in autotools make[1]: Nothing to be done for `all'. Making all in include make[1]: Nothing to be done for `all'. Making all in doc make[1]: Nothing to be done for `all'. Making all in liba52 /bin/sh ../libtool --mode=link ccache /usr/bin/gcc-4.0 -O3 -fomit-frame- pointer -prefer-non-pic -L/opt/local/lib -o liba52.la -rpath /opt/local/lib -no-undefined bitstream.lo imdct.lo bit_allocate.lo parse.lo downmix.lo -lm rm -fr .libs/liba52.la .libs/liba52.* .libs/liba52.* ccache -dynamiclib -o .libs/liba52.0.0.0.dylib bitstream.lo imdct.lo bit_allocate.lo parse.lo downmix.lo -L/opt/local/lib -lm -lc -install_name /opt/local/lib/liba52.0.dylib -compatibility_version 1 -current_version 1.0 ccache: illegal option -- d ccache, a compiler cache. Version 2.4 Copyright Andrew Tridgell, 2002 Usage: ccache [options] ccache compiler [compile options] compiler [compile options] (via symbolic link) Options: -s show statistics summary -z zero statistics -c run a cache cleanup -C clear the cache completely -F <maxfiles> set maximum files in cache -M <maxsize> set maximum size of cache (use G, M or K) -h this help page -V print version number make[1]: *** [liba52.la] Error 1 make: *** [all-recursive] Error 1 Error: The following dependencies failed to build: gegl ffmpeg a52dec db46 cyrus-sasl2 graphviz libsdl lua openexr ilmbase Error: Unable to upgrade port: 1 -- Ticket URL: <http://trac.macports.org/ticket/16826> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #16797: ilmbase needs build dependency on gsed
by MacPorts 06 Aug '09

06 Aug '09

#16797: ilmbase needs build dependency on gsed --------------------------------+------------------------------------------- Reporter: waterson(a)maubi.net | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: --------------------------------+------------------------------------------- The "ilmbase" port is missing a build-time dependency on gsed. ---> Building ilmbase with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ilmbase/work/ilmbase-1.0.1" && make all " returned error 2 Command output: Making all in Half if /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../config -I../config -I/opt/local/include -pipe -O2 -D_THREAD_SAFE -Wno-long-double -MT eLut.o -MD -MP -MF ".deps/eLut.Tpo" -c -o eLut.o eLut.cpp; \ then mv -f ".deps/eLut.Tpo" ".deps/eLut.Po"; else rm -f ".deps/eLut.Tpo"; exit 1; fi /bin/sh ../libtool --tag=CXX --mode=link /usr/bin/g++-4.0 -pipe -O2 -D_THREAD_SAFE -Wno-long-double -L/opt/local/lib -o eLut eLut.o ../libtool: line 390: /opt/local/bin/gsed: No such file or directory ../libtool: line 789: /opt/local/bin/gsed: No such file or directory /bin/echo: write: Broken pipe : ignoring unknown tag ../libtool: line 789: /opt/local/bin/gsed: No such file or directory *** Warning: inferring the mode of operation is deprecated. *** Future versions of Libtool will require --mode=MODE be specified. : warning: cannot infer operation mode from `/usr/bin/g++-4.0' : you must specify a MODE Try ` --help' for more information. make[1]: *** [eLut] Error 1 make: *** [all-recursive] Error 1 -- Ticket URL: <http://trac.macports.org/ticket/16797> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #16849: bzip2: wrong dylib version number
by MacPorts 06 Aug '09

06 Aug '09

#16849: bzip2: wrong dylib version number -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: ryandesign(a)macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: bzip2 -------------------------------------+-------------------------------------- bzip2 is at 1.0.5 but patch-Makefile-dylib.diff makes a library with version 1.0.4. We should not be hardcoding the version number in the patch but rather making use of the ${version} variable. -- Ticket URL: <http://trac.macports.org/ticket/16849> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #16495: ncview: update to 1.93e
by MacPorts 06 Aug '09

06 Aug '09

#16495: ncview: update to 1.93e -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: m(a)nnutter.com Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: ncview -------------------------------------+-------------------------------------- Please update ncview to 1.93e. Patch attached. -- Ticket URL: <http://trac.macports.org/ticket/16495> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #16780: gtk2hs 0.9.13 fails to build
by MacPorts 02 Aug '09

02 Aug '09

#16780: gtk2hs 0.9.13 fails to build ----------------------------+----------------------------------------------- Reporter: gale(a)sefer.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: gtk2hs ----------------------------+----------------------------------------------- During port upgrade gtk2hs with an up-to-date ports tree, I get: {{{ svgcairo/Graphics/Rendering/Cairo/SVG.chs:201:2: Couldn't match expected type `()' against inferred type `CInt' Expected type: Render () Inferred type: Render CInt In the expression: liftIO $ (\ (SVG arg1) (Cairo arg2) -> withForeignPtr arg1 $ \ argPtr1 -> rsvg_handle_render_cairo argPtr1 arg2) svg cr In the expression: do cr <- ask liftIO $ (\ (SVG arg1) (Cairo arg2) -> withForeignPtr arg1 $ \ argPtr1 -> rsvg_handle_render_cairo argPtr1 arg2) svg cr }}} -- Ticket URL: <http://trac.macports.org/ticket/16780> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0?
by MacPorts 02 Aug '09

02 Aug '09

#16755: gnucash-2.2.7_2 preferences cannot be accessed/modified: possibly related to orbit2-2.14.16_0, gconf-2.24.0_0 or dbus-1.2.3_0? -------------------------------------------------------+-------------------- Reporter: hypocrite(a)lawyer.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gnucash orbit2 gconf dbus orbit dbus-glib | Port: gnucash orbit2 gconf dbus -------------------------------------------------------+-------------------- Ran port updates (PPC): gnucash from 2.2.5_0 to 2.2.7_1; gconf from 2.22.0_0 to 2.24.0_0; orbit2 from 2.14.12_0 to 2.14.16_0; dbus from 1.1.20_1 to 1.2.3_0. Got the following errors, confirmed by two other users; was told it was probably a ORBit/GConf problem, or possibly dbus. Two error windows every time gnucash is launched. One says: "The configuration data used to specify default values for GnuCash cannot be found in the default system locations. Without this data GnuCash will still operate properly but it may require some extra time to setup. Do you wish to setup the configuration data?" The other says: "An error occurred while loading or saving configuration information for gnucash. Some of your configuration settings may not work properly." When I click "Details" on the second window, it says: "Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: dbus- launch failed to autolaunch D-Bus session: Autolaunch requested, but X11 support not compiled in." Gnucash mostly works fine otherwise, but preferences cannot be saved. That is, you can change them and click OK, but they don't actually do anything. Also, other "on-the-fly" preferences don't stick, such as the confirmation window when changing the reconciliation state of transactions. When I select, "don't warn me again", this is not remembered, and the windows will still pop up. Gnucash is also taking a ridiculous amount of CPU power, and is extremely slow, possibly related to locked files? -- Ticket URL: <http://trac.macports.org/ticket/16755> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 45

[MacPorts] #17349: svn.tag should be called svn.rev
by MacPorts 01 Aug '09

01 Aug '09

#17349: svn.tag should be called svn.rev -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.6.0 Keywords: | Port: -------------------------------------+-------------------------------------- The `svn.tag` keyword should really be called `svn.rev` because it is where you put the revision of the repository you would like to check out. I'm sure it's just called "tag" since it was probably copied from (or maybe even shares code with) the cvs checkout feature, where `cvs.tag` makes sense, since it's the tag name you want to check out. We should allow `svn.rev` as a synonym of `svn.tag`. Then, once we release a version of MacPorts with that change, we should mass-update all ports to use `svn.rev` instead. Then we can modify `port lint` to issue a warning if you use `svn.tag` and suggest you use `svn.rev` instead. -- Ticket URL: <http://trac.macports.org/ticket/17349> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #15439: gpsd build failure
by MacPorts 31 Jul '09

31 Jul '09

#15439: gpsd build failure -----------------------------------------+---------------------------------- Reporter: gwyan.rhabyt(a)csueastbay.edu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gpsd | -----------------------------------------+---------------------------------- gpsd build failed. Updated macports, xcode, x11. gpsd build still failed. Cleaned in various ways and it still fails. The errors in the log go beyond my limited understanding. Any suggestions? Terminal Log: {{{Last login: Mon May 26 15:43:29 on ttys000 Gwyan-Rhabyts-Computer-2:~ grhabyt$ sudo port clean --all gpsd Password: ---> Cleaning gpsd Gwyan-Rhabyts-Computer-2:~ grhabyt$ sudo port install gpsd ---> Fetching gpsd ---> Attempting to fetch gpsd-2.30.tar.gz from http://download.berlios.de/gpsd/ ---> Verifying checksum(s) for gpsd ---> Extracting gpsd ---> Configuring gpsd ---> Building gpsd with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_gpsd/work/gpsd-2.30" && make all " returned error 2 Command output: _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o "_waddch", referenced from: _main in sirfmon.o _main in sirfmon.o _main in sirfmon.o "_intrflush", referenced from: _main in sirfmon.o "_LINES", referenced from: _LINES$non_lazy_ptr in sirfmon.o "_scrollok", referenced from: _main in sirfmon.o ld: symbol(s) not found collect2: ld returned 1 exit status make[1]: *** [sirfmon] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. Gwyan-Rhabyts-Computer-2:~ grhabyt$ }}} -- Ticket URL: <http://trac.macports.org/ticket/15439> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #16832: postgresql83[-server, -doc] Unable to verify file checksums
by MacPorts 29 Jul '09

29 Jul '09

#16832: postgresql83[-server, -doc] Unable to verify file checksums ----------------------------------+----------------------------------------- Reporter: ben(a)benspaulding.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: postgresql83, postgresql83-server, postgresql83-doc,, ----------------------------------+----------------------------------------- All postgresql83* ports fail with the following: {{{ … ---> Verifying checksum(s) for postgresql83 Error: Checksum (md5) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (sha1) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (rmd160) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (md5) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (sha1) mismatch for postgresql-8.3.4.tar.bz2 Error: Checksum (rmd160) mismatch for postgresql-8.3.4.tar.bz2 Error: Target org.macports.checksum returned: Unable to verify file checksums Error: The following dependencies failed to build: postgresql83 Error: Status 1 encountered during processing. }}} I have done a {{{sudo port sync}}} and {{{sudo port clean --all <portname>}}} followed by a {{{port install <portname>}}} to try and resolve the issue, but with no success. I assume this has something to do with the recent release of [http://www.postgresql.org/docs/8.3/static/release-8-3-4.html PostgreSQL 8.3.4]. -- Ticket URL: <http://trac.macports.org/ticket/16832> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #16738: transmission-x11 1.34 : new release
by MacPorts 29 Jul '09

29 Jul '09

#16738: transmission-x11 1.34 : new release --------------------------------+------------------------------------------- Reporter: neric27(a)wanadoo.fr | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: transmission-x11 --------------------------------+------------------------------------------- transmission 1.34 is available. Attached an updated Portfile. transmission used to be split between 2 ports : - transmission : build the aqua version - transmission-x11: build the command-line and gtk version Why not merge them and use variants instead ? NOTE : The aqua front-end (port transmission) doesn't build on OS X Tiger (requires XCode 3), so I can't test it, but I can provide a tentative Portfile. -- Ticket URL: <http://trac.macports.org/ticket/16738> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6