November 2008 - macports-tickets - lists.macosforge.org

[MacPorts] #16767: py25-libxml2 checksum error
by MacPorts 10 Mar '09

10 Mar '09

#16767: py25-libxml2 checksum error ------------------------------------+--------------------------------------- Reporter: mvanier(a)cs.caltech.edu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ------------------------------------+--------------------------------------- I can't get gnome compiled because it hangs up on py25-libxml2: {{{ > sudo port install py25-libxml2 ---> Fetching py25-libxml2 ---> Attempting to fetch libxml2-python-2.6.21.tar.gz from ftp://xmlsoft.org/libxml2/python/ ---> Verifying checksum(s) for py25-libxml2 Error: Checksum (md5) mismatch for libxml2-python-2.6.21.tar.gz Error: Checksum (sha1) mismatch for libxml2-python-2.6.21.tar.gz Error: Checksum (rmd160) mismatch for libxml2-python-2.6.21.tar.gz Error: Target org.macports.checksum returned: Unable to verify file checksums Error: Status 1 encountered during processing. }}} Cleaning and redoing it gives the same result. -- Ticket URL: <http://trac.macports.org/ticket/16767> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15481: planet.macports.org
by MacPorts 09 Mar '09

09 Mar '09

#15481: planet.macports.org ---------------------------------+------------------------------------------ Reporter: rhwood(a)macports.org | Owner: jmpp(a)macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Website & Documentation Component: website | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ MacPorts should have a planet site not unlike planet.gnome.org or planet.fedora.org or any of the other project-related developer's blog feed aggregators out there. -- Ticket URL: <http://trac.macports.org/ticket/15481> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #17119: texlive not available
by MacPorts 08 Mar '09

08 Mar '09

#17119: texlive not available ------------------------------------+--------------------------------------- Reporter: post(a)thomas-zastrow.de | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ------------------------------------+--------------------------------------- I try to install texlive with "install textlive" and then it tries to download texlive_texmf-minimal-2007g0.tar.gz from several servers, but no one seems to have the file: ---> Fetching texlive_texmf-minimal ---> Attempting to fetch texlive_texmf-minimal-2007g0.tar.gz from http://mirror.roothell.org/pub/OpenBSD/distfiles ---> Attempting to fetch texlive_texmf-minimal-2007g0.tar.gz from http ://ftp-stud.fht-esslingen.de/pub/OpenBSD/distfiles ---> Attempting to fetch texlive_texmf-minimal-2007g0.tar.gz from http://mirror.paranoidbsd.org/pub/OpenBSD/distfiles ---> Attempting to fetch texlive_texmf-minimal-2007g0.tar.gz from ftp://ftp.openbsd.org/pub/OpenBSD/distfiles -- Ticket URL: <http://trac.macports.org/ticket/17119> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #17367: port tries to deactivate wrong version on upgrade
by MacPorts 07 Mar '09

07 Mar '09

#17367: port tries to deactivate wrong version on upgrade -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | Port: -------------------------------------+-------------------------------------- This is with MacPorts from trunk @42527 on Mac OS X 10.4.11 Intel with Xcode 2.5: {{{ $ port installed freetype The following ports are currently installed: freetype @2.3.7_1+doc+universal (active) freetype @2.3.7_1+universal $ port upgrade freetype ---> Fetching freetype ---> Verifying checksum(s) for freetype ---> Extracting freetype ---> Applying patches to freetype ---> Configuring freetype ---> Building freetype ---> Staging freetype into destroot ---> Deactivating freetype @2.3.7_1+universal Error: Deactivating freetype 2.3.7_1 failed: Active version of freetype is not 2.3.7_1+universal but 2.3.7_1+doc+universal. $ }}} -- Ticket URL: <http://trac.macports.org/ticket/17367> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #16454: Fail to set time in many directories and "%% port" is not being recognized
by MacPorts 07 Mar '09

07 Mar '09

#16454: Fail to set time in many directories and "%% port" is not being recognized ---------------------------------------+------------------------------------ Reporter: X_iLeH(a)yahoo.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: Port failed Couldn't sync | Port: ---------------------------------------+------------------------------------ I installed MacPorts using the installer and then did the profile fix, MANPATH and helppath and the man and help worked until I closed the terminal and opened a new one. and then not even those would work. So I don't really no what's wrong I've messed with it a bit (pico .profile and copied over what it should be but still didn't work). So a few days later and out of ideas, I need some help. If you want the output from the curl then ill send it but other than that I don't know what to tell you. This is the end output of the curl to fix .profile {{{ sent 36540 bytes received 367818 bytes 38510.29 bytes/sec total size is 18789274 speedup is 46.47 rsync error: some files could not be transferred (code 23) at /SourceCache/rsync/rsync-35.2/rsync/main.c(1400) [generator=2.6.9] Error: /opt/local/bin/port: port selfupdate failed: Couldn't sync the ports tree: Synchronization the local ports tree failed doing rsync An attempt to synchronize your recent MacPorts installation with the project's rsync server failed! Please run 'sudo port -d selfupdate' manually to find out the cause of the error. You have succesfully installed the MacPorts system, launch a terminal and try it out! Read the port(1) manual page and http://guide.macports.org for help, http://www.macports.org/contact.php if you need to get in touch with The MacPorts Project. }}} -- Ticket URL: <http://trac.macports.org/ticket/16454> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15868: port-1.600: port sync fails with "please get a newer Subversion client"
by MacPorts 06 Mar '09

06 Mar '09

#15868: port-1.600: port sync fails with "please get a newer Subversion client" ----------------------------------+----------------------------------------- Reporter: kimuraw(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 1.6.0 Keywords: | ----------------------------------+----------------------------------------- I have some port trees under subversion. Today, I got the following error at "sudo port sync". {{{ % which svn /opt/local/bin/svn % /opt/local/bin/svn --version svn, version 1.5.0 (r31699) : % /usr/bin/svn --version svn, version 1.4.4 (r25188) : % sudo port -v sync Synchronizing local ports tree from file:///opt/dports.dev svn: This client is too old to work with working copy '/opt/dports.dev'; please get a newer Subversion client port sync failed: Synchronization of the local ports tree failed doing an svn update }}} I fixed this problem with changing the value of svn_path to "/opt/local/bin/svn" in /Library/Tcl/macports1.0/macports_autoconf.tcl. I think autoconf_hint is not so needed at in macports1.0/macports.tcl(line 1317) to detect the path of `svn' command. -- Ticket URL: <http://trac.macports.org/ticket/15868> MacPorts <http://www.macports.org/> Ports system for Mac OS

2 15

[MacPorts] #16085: port deactivates then activates active dependency if another version is installed
by MacPorts 06 Mar '09

06 Mar '09

#16085: port deactivates then activates active dependency if another version is installed -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- I have two versions of glib2 installed -- one universal (active), one non- universal (inactive). When I upgrade a port that depends on glib2 (in this case graphviz-devel) port first deactivates glib2 then reactivates the exact same glib2. It shouldn't do that. This is with MacPorts trunk @38333 on Mac OS X 10.4.11 Intel with Xcode 2.5. {{{ $ port installed glib2 The following ports are currently installed: glib2 @2.16.5_0 glib2 @2.16.5_0+universal (active) $ port upgrade graphviz-devel ---> Deactivating glib2 @2.16.5_0+universal ---> Activating glib2 @2.16.5_0+universal ---> Fetching graphviz-devel [snip] }}} -- Ticket URL: <http://trac.macports.org/ticket/16085> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 10

[MacPorts] #16357: xemacs-21.4.21 newer port looks much worse than older port?
by MacPorts 05 Mar '09

05 Mar '09

#16357: xemacs-21.4.21 newer port looks much worse than older port? -----------------------------------+---------------------------------------- Reporter: schneck(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: xemacs font sumo mule | -----------------------------------+---------------------------------------- The older port of xemacs (which I installed +sumo but without mule) looks good to me The newer port (which automatically comes with sumo and mule) looks bad--- the font just looks poor in comparison, as if poorly bitmapped or something... Is this something to do with mule? Perhaps a no_mule option for those who want sumo but not mule could be made available. -- Ticket URL: <http://trac.macports.org/ticket/16357> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #16423: KMyMoney 0.8.9 fails to compile
by MacPorts 04 Mar '09

04 Mar '09

#16423: KMyMoney 0.8.9 fails to compile ---------------------------------------------+------------------------------ Reporter: informatique(a)thibaut-cousin.net | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: kmymoney | ---------------------------------------------+------------------------------ I'm using Macports 1.6.0 (selfupdate was made) on Leopard 10.5.4 Intel with Xcode 3.1. Installing the rest of KDE, and other KDE applications, went fine but KMyMoney is an exception. Downloading and configuring is OK, but building fails with: Making install in pics make[3]: Nothing to be done for `install-exec-am'. test -z "/opt/local/share/apps/kmymoney2/pics/" || ../../admin/install-sh -c -d "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kmymoney/work/destroot/opt/local/share/apps/kmymoney2/pics/" mkdir: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kmymoney/work/destroot/opt/local/share/apps/kmymoney2/pics/: File exists make[3]: *** [install-kmymoneyDATA] Error 1 make[2]: *** [install-am] Error 2 make[1]: *** [install-recursive] Error 1 make: *** [install-recursive] Error 1 Of course, my building environment is clean and there was no leftover from a previous try. I met a similar problem a few weeks ago, when I was using Fink. I could solve it by changing something in the Makefile: replacing install -c -d by mkdir -p. But: 1) This was an ugly hack. 2) I don't know how to make a change inside the source tarball with Macports. 3) Maybe there's a better solution, or this new problem isn't really related to the previous one. Thanks for your attention. -- Ticket URL: <http://trac.macports.org/ticket/16423> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #16778: cairo @1.8.0 requesting a +no_quartz variant
by MacPorts 04 Mar '09

04 Mar '09

#16778: cairo @1.8.0 requesting a +no_quartz variant -------------------------------------------+-------------------------------- Reporter: mail_ben_schmidt(a)yahoo.com.au | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------------------+-------------------------------- Could a +no_quartz variant be added to the cairo port, please? The Quartz backend causes problems for me with Hebrew text. By the look of it, Quartz has some built-in bidirectional support that screws things up. I guess there is a slight chance this is related to [http://trac.macports.org/ticket/15626 #15626]. Even if it isn't related, the users experiencing the deficiency of that ticket may benefit from such a variant, too. A simple patch that adds the variant is attached. To make the problem go away, one must activate cairo with +no_quartz and then recompile pango (I do port -vf deactivate cairo, port -vf install cairo +no_quartz, port -vf uninstall pango @1.22.0_0, port -vf install pango). I guess this means pango must link against cairo statically. Is there any chance of changing that, too? I would open a second ticket, but I believe the maintainer is the same, so perhaps just a comment here will suffice. The problem is demonstrated in the attached pictures, which show a GTK2 GUI version of Vim displaying the attached text file with :set rightleft wrap linebreak. My suspicion that it is to do with bidi is substantiated by the fact that portions of the lines seem to be simply reversed in the consonant-only text (the part at the bottom without all the dots). -- Ticket URL: <http://trac.macports.org/ticket/16778> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4