December 2008 - macports-tickets - lists.macosforge.org

[MacPorts] #16524: qtpfsgui can't open raw file
by MacPorts 29 Aug '11

29 Aug '11

#16524: qtpfsgui can't open raw file ------------------------------------------+--------------------------------- Reporter: dersh(a)alum.mit.edu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: qtpfsgui raw NEF dcraw ufraw | Port: qtpfsgui ------------------------------------------+--------------------------------- If I try to open a NEF raw file with qtpfsgui it opens a dialog box that says "ERROR: Cannot start dcraw on file: DSC_1527.NEF" I found that the version on the web site qtpfsgui web site contains dcraw, but that the port version does not. While I have the ufraw port installed, and installed dcraw. I copied cfraw into the application qtpfsgui/Contents/MacOS and now it will open NEF files. So the problem is just that qtpfsgui is not properly finding dcraw. I suppose that it should be pointed to find the version in Macports, or the port could just copy dcraw into the application. I am not sure how to change the port file so that either of the above happen, however. Also, either ufraw or dcraw should probably be a dependent of qtpfsgui. Finally, perhaps it should be a separate ticket, but the port of dcraw can't install, since ufraw installs that same file, and I already have installed that. So something should change about one or the other of these paths/ports. Perhaps ufraw should just depend on dcraw instead of including its own version of that same code? --Adam -- Ticket URL: <http://trac.macports.org/ticket/16524> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #17064: add BitTorrent as alternative for downloading ports
by MacPorts 29 Jul '11

29 Jul '11

#17064: add BitTorrent as alternative for downloading ports ------------------------------------+--------------------------------------- Reporter: hotfusionman(a)yahoo.com | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Low | Milestone: MacPorts base enhancements Component: base | Version: 1.6.0 Keywords: | Port: ------------------------------------+--------------------------------------- I discovered while trying to install Erlang's otp_src_R12B-4 that the standard HTTP download was taking forever, but there was a torrent file right next to it, and the torrent download went orders of magnitude faster. It would have been nice a) to have gotten feedback on the progress of the download and b) to be able to use (or fail over to) the BittTorrent download mechanism automatically. I took some notes on the macports.tcl script to sketch out how a BitTorrent client might be used instead of curl but have not tried out any of my code yet. -- Ticket URL: <http://trac.macports.org/ticket/17064> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #16723: unify the python portgroups
by MacPorts 22 Jul '11

22 Jul '11

#16723: unify the python portgroups ------------------------------+--------------------------------------------- Reporter: jmr(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Keywords: | Port: ------------------------------+--------------------------------------------- The current practice of having separate ports of modules for each python version is awkward, and will get far worse now that python 2.6 and 3.0 are being released. Here is a portgroup that should be able to replace the current python25 and python24 groups, and can install for any combination of the available python versions at once via variants. -- Ticket URL: <http://trac.macports.org/ticket/16723> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 23

[MacPorts] #17401: emacs make-term: eterm-color not found due to new ncurses version
by MacPorts 16 Jul '11

16 Jul '11

#17401: emacs make-term: eterm-color not found due to new ncurses version ---------------------------------+------------------------------------------ Reporter: vinc17@… | Owner: imajes@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: emacs,ncurses,ncursesw ---------------------------------+------------------------------------------ Since I've upgraded to ncurses and ncursesw 5.7_0, when I type in emacs 22.3.1: {{{ ESC : (make-term "tack" "tack") }}} I get the following error in buffer *tack*: {{{ Terminal not found: TERM=eterm-color usage: tack [-itV] [term] Process tack exited abnormally with code 1 }}} The problem disappears after downgrading to ncurses/ncursesw 5.6. So, it seems that the new ncurses version broke something. -- Ticket URL: <http://trac.macports.org/ticket/17401> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #17102: libgda's postgresql8 variant should depend on postgresql83
by MacPorts 03 Jul '11

03 Jul '11

#17102: libgda's postgresql8 variant should depend on postgresql83 ------------------------------+--------------------------------------------- Reporter: nox(a)macports.org | Owner: landonf(a)macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: Keywords: | Port: libgda postgresql83 ------------------------------+--------------------------------------------- libgda's postgresql8 variant currently depend on postgresql80, I think it should depend on the latest stable version of PostgreSQL: postgresql83. -- Ticket URL: <http://trac.macports.org/ticket/17102> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #16702: [NEW] mod_security2
by MacPorts 16 Jun '11

16 Jun '11

#16702: [NEW] mod_security2 -------------------------------------+-------------------------------------- Reporter: myschizobuddy(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------------+-------------------------------------- Mod Security 2 is an updated intrusion detection and prevention engine for web applications. It works only with Apache2 -- Ticket URL: <http://trac.macports.org/ticket/16702> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #16785: pidgin-2.5.1 Will not build
by MacPorts 08 Jun '11

08 Jun '11

#16785: pidgin-2.5.1 Will not build -----------------------------------+---------------------------------------- Reporter: kioarthurdane(a)mac.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: pidgin | Port: pidgin -----------------------------------+---------------------------------------- First run results: {{{ ---> Verifying checksum(s) for dbus-glib ---> Extracting dbus-glib ---> Configuring dbus-glib ---> Building dbus-glib with target all ---> Staging dbus-glib into destroot ---> Installing dbus-glib 0.76_0 ---> Activating dbus-glib 0.76_0 ---> Cleaning dbus-glib ---> Fetching pidgin ---> Attempting to fetch pidgin-2.4.3.tar.bz2 from http://downloads.sourceforge.net/pidgin ---> Verifying checksum(s) for pidgin ---> Extracting pidgin ---> Applying patches to pidgin ---> Configuring pidgin ---> Building pidgin with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.4.3" && make all " returned error 2 Command output: pidgin/plugins/Makefile.am:68: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/Makefile.am:68: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/Makefile.am:68: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/Makefile.am:68: its definition is in aclocal's search path. pidgin/plugins/cap/Makefile.am:9: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/cap/Makefile.am:9: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/cap/Makefile.am:9: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/cap/Makefile.am:9: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/cap/Makefile.am:9: its definition is in aclocal's search path. pidgin/plugins/gestures/Makefile.am:7: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/gestures/Makefile.am:7: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/gestures/Makefile.am:7: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/gestures/Makefile.am:7: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/gestures/Makefile.am:7: its definition is in aclocal's search path. pidgin/plugins/gevolution/Makefile.am:7: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/gevolution/Makefile.am:7: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/gevolution/Makefile.am:7: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/gevolution/Makefile.am:7: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/gevolution/Makefile.am:7: its definition is in aclocal's search path. pidgin/plugins/musicmessaging/Makefile.am:14: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/musicmessaging/Makefile.am:14: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/musicmessaging/Makefile.am:14: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/musicmessaging/Makefile.am:14: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/musicmessaging/Makefile.am:14: its definition is in aclocal's search path. pidgin/plugins/ticker/Makefile.am:10: Libtool library used but `LIBTOOL' is undefined pidgin/plugins/ticker/Makefile.am:10: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' pidgin/plugins/ticker/Makefile.am:10: to `configure.ac' and run `aclocal' and `autoconf' again. pidgin/plugins/ticker/Makefile.am:10: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure pidgin/plugins/ticker/Makefile.am:10: its definition is in aclocal's search path. make: *** [Makefile.in] Error 1 }}} Further attempts: {{{ sudo port install pidgin ---> Building pidgin with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.5.1" && make all " returned error 1 Command output: sh: line 0: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_pidgin/work/pidgin-2.5.1: No such file or directory }}} -- Ticket URL: <http://trac.macports.org/ticket/16785> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #15476: The following dependencies failed to build: py25-hashlib python25
by MacPorts 08 Jun '11

08 Jun '11

#15476: The following dependencies failed to build: py25-hashlib python25 ---------------------------+------------------------------------------------ Reporter: ewira(a)free.fr | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ---------------------------+------------------------------------------------ '''hello this is what i have obtained when updated outdated ports:''' {{{ PowerPop:/Users/popop will$ port outdated The following installed ports are outdated: iso-codes 1.4_0 < 2.0_0 PowerPop:/Users/popop will$ sudo port upgrade outdated ---> Building python25 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2" && make all " returned error 1 Command output: sh: line 1: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2: No such file or directory Error: The following dependencies failed to build: python25 ---> Building python25 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2" && make all " returned error 1 Command output: sh: line 1: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2: No such file or directory ---> Building python25 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2" && make all " returned error 1 Command output: sh: line 1: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2: No such file or directory Error: The following dependencies failed to build: py25-hashlib python25 Error: Unable to upgrade port: 1 }}} '''Before this oudated command, I have tried to install gnumeric and obtained the following, after several attempt:''' {{{ PowerPop:/Users/popop will$ sudo port install gnumeric ---> Building python25 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2" && make all " returned error 1 Command output: sh: line 1: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.2: No such file or directory Error: The following dependencies failed to build: gnome-doc-utils py25-gobject python25 py25-hashlib py25-libxml2 py25-numeric rarian intltool gnome-common goffice libgnomeprintui gnome-icon-theme hicolor- icon-theme icon-naming-utils p5-getopt-long p5-pathtools p5-xml-simple p5 -xml-namespacesupport p5-xml-sax libgnomecanvas gail libart_lgpl libglade2 libgnomeprint bison m4 libgnomecups popt libgsf gnome-vfs desktop-file- utils gconf orbit2 libidl gnome-mime-data libbonobo pcre py25-gtk py25-cairo py25-numpy fftw-3 g95 odcctools subversion apr apr-util db44 sqlite3 gawk gmake readline neon Error: Status 1 encountered during processing. }}} '''my setup:''' {{{ PowerPop:/Users/popop will$ sw_vers ProductName: Mac OS X ProductVersion: 10.4.11 BuildVersion: 8S165 PowerPop:/Users/popop will$ uname -a Darwin PowerPop.local 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh powerpc PowerPop:/Users/popop will$ port version Version: 1.600 }}} Xcode = 2.5 anyone could help me as I would like to install gnumeric... Thanks in advance, and for the macport team, MacPorts is really nice... Will -- Ticket URL: <http://trac.macports.org/ticket/15476> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #15489: g95 port fails to build
by MacPorts 08 Jun '11

08 Jun '11

#15489: g95 port fails to build -------------------------------+-------------------------------------------- Reporter: macports(a)flyn.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- I get the following error when I try to build g95 (as a dependency for gnumeric, inkscape or gimp): ---> Attempting to fetch g95_source.tgz from http://ftp.g95.org/v0.91/ Error: Target org.macports.fetch returned: fetch failed I receive a 404 error when I try to load http://ftp.g95.org/v0.91/ in my browser. -- Ticket URL: <http://trac.macports.org/ticket/15489> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #16196: ImageMagick macports error
by MacPorts 08 Jun '11

08 Jun '11

#16196: ImageMagick macports error -------------------------------------+-------------------------------------- Reporter: cmillet(a)milletgroup.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- --> Building ImageMagick with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ImageMagick/work/ImageMagick-6.4.2" && make all " returned error 1 Command output: sh: line 0: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ImageMagick/work/ImageMagick-6.4.2: No such file or directory Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/16196> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3