December 2008 - macports-tickets - lists.macosforge.org

[MacPorts] #16057: cairo missing dependency on fontconfig, or internal misconfiguration of some sort
by MacPorts 19 Aug '09

19 Aug '09

#16057: cairo missing dependency on fontconfig, or internal misconfiguration of some sort -----------------------------------+---------------------------------------- Reporter: gkshenaut(a)ucdavis.edu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -----------------------------------+---------------------------------------- % sudo port install cairo Portfile changed since last build; discarding previous state. ---> Fetching cairo ---> Verifying checksum(s) for cairo ---> Extracting cairo ---> Configuring cairo Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_cairo/work/cairo-1.6.4" && ./configure --prefix=/opt/local --x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib --disable-glitz --disable-xcb --enable- freetype --enable-pdf --enable-png --enable-ps --enable-svg --enable-xlib --enable-xlib-xrender --with-x --enable-quartz --enable-quartz-font --enable-quartz-image " returned error 1 Command output: checking for cairo's Quartz backend... [...] checking for cairo's FreeType font backend... checking for FONTCONFIG... yes checking for FcFini... no no checking whether cairo's FreeType font backend could be enabled... no (requires fontconfig) configure: error: requested FreeType font backend could not be enabled Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/16057> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #17800: Failed to build hmake
by MacPorts 10 Aug '09

10 Aug '09

#17800: Failed to build hmake ----------------------------------+----------------------------------------- Reporter: gggg.iiiii@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: ----------------------------------+----------------------------------------- I have been trying to build hmake with no success. My ports are up-to-date. ---> Fetching hmake ---> Verifying checksum(s) for hmake ---> Extracting hmake ---> Applying patches to hmake ---> Configuring hmake ---> Building hmake Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_hmake/work/hmake-3.14" && make all " returned error 2 Command output: or --package-conf can be used to act on another database entirely. When multiple of these options are given, the rightmost one is used as the database to act upon. Commands that query the package database (list, latest, describe, field) operate on the list of databases specified by the flags --user, --global, and --package-conf. If none of these flags are given, the default is --global --user. The following optional flags are also accepted: --user use the current user's package database --global use the global package database -f FILE --package-conf=FILE use the specified package config file --global-conf=FILE location of the global package config --no-user-package-conf never read the user package database --force ignore missing dependencies, directories, and libraries --force-files ignore missing directories and libraries only -g --auto-ghci-libs automatically build libs for GHCi (with register) -? --help display this help and exit -V --version output version information and exit --simple-output print output in easy-to-parse format for some commands --names-only only print package names, not versions; can only be used with list --simple-output --ignore-case ignore case for substring matching MkConfig: user error (Command (/opt/local/bin/ghc-pkg-6.10.1 -l) failed) hmake-config: compiler not known: 'ghc' make[1]: *** [config] Error 2 make: *** [targets/ix86-Darwin-9.6.0/hmake-ghc] Error 2 Error: Status 1 encountered during processing. ghais-issas-macbook:~ ghais$ sudo port clean hmake ---> Cleaning hmake ghais-issas-macbook:~ ghais$ sudo port install hmake ---> Fetching hmake ---> Verifying checksum(s) for hmake ---> Extracting hmake ---> Applying patches to hmake ---> Configuring hmake ---> Building hmake Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_hmake/work/hmake-3.14" && make all " returned error 2 Command output: or --package-conf can be used to act on another database entirely. When multiple of these options are given, the rightmost one is used as the database to act upon. Commands that query the package database (list, latest, describe, field) operate on the list of databases specified by the flags --user, --global, and --package-conf. If none of these flags are given, the default is --global --user. The following optional flags are also accepted: --user use the current user's package database --global use the global package database -f FILE --package-conf=FILE use the specified package config file --global-conf=FILE location of the global package config --no-user-package-conf never read the user package database --force ignore missing dependencies, directories, and libraries --force-files ignore missing directories and libraries only -g --auto-ghci-libs automatically build libs for GHCi (with register) -? --help display this help and exit -V --version output version information and exit --simple-output print output in easy-to-parse format for some commands --names-only only print package names, not versions; can only be used with list --simple-output --ignore-case ignore case for substring matching MkConfig: user error (Command (/opt/local/bin/ghc-pkg-6.10.1 -l) failed) hmake-config: compiler not known: 'ghc' make[1]: *** [config] Error 2 make: *** [targets/ix86-Darwin-9.6.0/hmake-ghc] Error 2 Error: Status 1 encountered during processing. I am kind of new to macport, previously a debian user, if there is anything else needed form me please let me know. -- Ticket URL: <http://trac.macports.org/ticket/17800> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #16499: speex, speex-devel: enable parallel build
by MacPorts 10 Aug '09

10 Aug '09

#16499: speex, speex-devel: enable parallel build -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: billitch(a)gmail.com Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------------+-------------------------------------- Do you have any objection to enabling the parallel build feature in the speex and speex-devel ports? This lets them build faster on multiprocessor systems. -- Ticket URL: <http://trac.macports.org/ticket/16499> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #16104: libgeotiff: please update to 1.2.4
by MacPorts 10 Aug '09

10 Aug '09

#16104: libgeotiff: please update to 1.2.4 -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: shadow(a)dementia.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- The libgeotiff port is at version 1.2.1 but version 1.2.4 is available. The port should be updated. -- Ticket URL: <http://trac.macports.org/ticket/16104> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15814: Verbose output not printed on Mac OS X 10.3.9 Panther
by MacPorts 09 Aug '09

09 Aug '09

#15814: Verbose output not printed on Mac OS X 10.3.9 Panther -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- MacPorts is not printing verbose output when requested on Mac OS X 10.3.9 Panther (on PowerPC of course). "`port -v install freetype`" proceeds as if "`-v`" had not been given. "`port -d install freetype`" prints the debug information, but still not the verbose information. It works fine on Mac OS X 10.4.11 and 10.5.3 (both on Intel). I am using trunk @37986. -- Ticket URL: <http://trac.macports.org/ticket/15814> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #15757: port distfiles shows name and URLs of new distfile but checksums of old distfile
by MacPorts 09 Aug '09

09 Aug '09

#15757: port distfiles shows name and URLs of new distfile but checksums of old distfile -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- The ncid port is at version 0.70. "`port distfiles ncid`" says this: {{{ $ port distfiles ncid ---> Distfiles for ncid [ncid-0.70.tar.gz] md5: e179fbac6ab04ed3015fdf4e1c2a33f6 sha1: 287ebd8181f94be6a252edb10bf8b3593ac50d60 rmd160: 3da3269e9c8dd1da1c9ddf3b1e7be180230979a9 http://downloads.sourceforge.net/ncid/ncid-0.70.tar.gz [snip other download locations] }}} I edited the portfile and updated the version to 0.71. Now "`port distfiles ncid`" says this: {{{ $ port distfiles ncid Portfile changed since last build; discarding previous state. ---> Distfiles for ncid [ncid-0.71.tar.gz] md5: e179fbac6ab04ed3015fdf4e1c2a33f6 sha1: 287ebd8181f94be6a252edb10bf8b3593ac50d60 rmd160: 3da3269e9c8dd1da1c9ddf3b1e7be180230979a9 http://downloads.sourceforge.net/ncid/ncid-0.71.tar.gz [snip other download locations] }}} I see two problems: 1. It did not attempt to fetch ncid-0.71.tar.gz 2. Even if I "`port fetch ncid`" to get the new distfile, it is still showing the checksums of ncid-0.70.tar.gz; it should show the checksums of ncid-0.71.tar.gz Or do I misunderstand how "`port distfiles`" is meant to work? -- Ticket URL: <http://trac.macports.org/ticket/15757> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #16300: e2fsprogs-1.40.6 Configuration error - build failure
by MacPorts 08 Aug '09

08 Aug '09

#16300: e2fsprogs-1.40.6 Configuration error - build failure ------------------------------------------+--------------------------------- Reporter: joshua.friedman(a)mections.net | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------------------+--------------------------------- I'm on os x 10.4 and e2fsprogs is failing to link. making all in lib/ext2fs GEN_BSD_SOLIB libext2fs.2.1.dylib ld: common symbols not allowed with MH_DYLIB output format with the -multi_module option tdb.o definition of common _tdb_null (size 8) /usr/bin/libtool: internal link edit command failed make[2]: *** [libext2fs.2.1.dylib] Error 1 make[1]: *** [all-libs-recursive] Error 1 make: *** [all] Error 2 -- Ticket URL: <http://trac.macports.org/ticket/16300> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #17809: RFE: Add correct dependencies for use_* in configure
by MacPorts 07 Aug '09

07 Aug '09

#17809: RFE: Add correct dependencies for use_* in configure ---------------------------------------------------------------------------------------+ Reporter: raimue@… | Owner: raimue@… Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts 1.8.0 Component: ports | Version: 1.7.0 Keywords: configure dependencies use_autoconf use_autoreconf use_automake use_xmkmf | Port: ---------------------------------------------------------------------------------------+ There are some options available to run configuration script generators before configure. * use_autoconf * use_autoreconf * use_automake * use_xmkmf All of them require tools to be provided by the system or to be installed by MacPorts. -- Ticket URL: <http://trac.macports.org/ticket/17809> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #15943: py-game 1.8.0 fails to build
by MacPorts 07 Aug '09

07 Aug '09

#15943: py-game 1.8.0 fails to build ------------------------------------------+--------------------------------- Reporter: macosforge.org(a)zopatista.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------------------+--------------------------------- Build log {{{ ---> Configuring py-game Error: reinplace: couldn't read file "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_python_py-game/work/pygame-1.8.0release/Setup": no such file or directory Error: Target org.macports.configure returned: reinplace sed(1) failed Error: Status 1 encountered during processing. crowley:devel mj$ sudo port clean py-game ---> Cleaning py-game crowley:devel mj$ sudo port install py-game ---> Fetching py-game ---> Verifying checksum(s) for py-game ---> Extracting py-game ---> Applying patches to py-game ---> Configuring py-game Error: reinplace: couldn't read file "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_python_py-game/work/pygame-1.8.0release/Setup": no such file or directory Error: Target org.macports.configure returned: reinplace sed(1) failed Error: Status 1 encountered during processing. }}} -- Ticket URL: <http://trac.macports.org/ticket/15943> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #16821: qemu-usermode: homepage has changed
by MacPorts 07 Aug '09

07 Aug '09

#16821: qemu-usermode: homepage has changed -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: mww(a)macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: qemu-usermode -------------------------------------+-------------------------------------- The homepage of qemu-usermode has changed. The port lists http://fabrice.bellard.free.fr/ but when you go there it says the new address is http://bellard.org/ . This will also be the reason why the port cannot currently be fetched with MacPorts 1.6.0. (Workaround: [wiki:howto/RunningTrunk build MacPorts from trunk] or [wiki:ProblemHotlist#Fetchfailures download the distfile from our mirror].) This was originally [http://lists.macosforge.org/pipermail/macports- users/2008-October/011843.html reported by Frank J. R. Hanstick on macports-users]. -- Ticket URL: <http://trac.macports.org/ticket/16821> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1