June 2008 - macports-tickets - lists.macosforge.org

[MacPorts] #15489: g95 port fails to build
by MacPorts 08 Jun '11

08 Jun '11

#15489: g95 port fails to build -------------------------------+-------------------------------------------- Reporter: macports(a)flyn.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- I get the following error when I try to build g95 (as a dependency for gnumeric, inkscape or gimp): ---> Attempting to fetch g95_source.tgz from http://ftp.g95.org/v0.91/ Error: Target org.macports.fetch returned: fetch failed I receive a 404 error when I try to load http://ftp.g95.org/v0.91/ in my browser. -- Ticket URL: <http://trac.macports.org/ticket/15489> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15517: pango error install; No such file or directory
by MacPorts 08 Jun '11

08 Jun '11

#15517: pango error install; No such file or directory ------------------------------------+--------------------------------------- Reporter: esben_kaufmann(a)msn.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: pango | ------------------------------------+--------------------------------------- I need pango to install "playerstage-stage" and I get the following error when trying to install pango: ---> Configuring pango Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_pango/work/pango-1.20.3" && ./configure --prefix=/opt/local --enable-static --enable-cairo " returned error 1 Command output: sh: line 0: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_pango/work/pango-1.20.3: No such file or directory -- Ticket URL: <http://trac.macports.org/ticket/15517> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #15796: transmission fails to install
by MacPorts 28 Feb '11

28 Feb '11

#15796: transmission fails to install ----------------------------------+----------------------------------------- Reporter: andrewroth(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ----------------------------------+----------------------------------------- Trying to install transmission bittorrent client, I get this error: --(/Users/andrewroth/Documents)-----(andrewroth@andrew-roths-macbook- pro:s001)-- --(18:34)-- $ sudo port install transmission Password: ---> Fetching transmission ---> Attempting to fetch transmission-1.06.tar.bz2 from http://download.m0k.org/transmission/files/ ---> Verifying checksum(s) for transmission ---> Extracting transmission ---> Configuring transmission ---> Building transmission ---> Staging transmission into destroot ---> Installing transmission 1.06_0 ---> Activating transmission 1.06_0 Error: Target org.macports.activate returned: Image error: transmission @1.06_0 not installed as an image. Error: Status 1 encountered during processing. try again.. --(/Users/andrewroth/Documents)-----(andrewroth@andrew-roths-macbook- pro:s001)-- --(18:59)-- $ sudo port install transmission ---> Activating transmission 1.06_0 Error: Target org.macports.activate returned: Image error: transmission @1.06_0 not installed as an image. Error: Status 1 encountered during processing. --(/Users/andrewroth/Documents)-----(andrewroth@andrew-roths-macbook- pro:s001)-- --(19:00)-- $ -- Ticket URL: <http://trac.macports.org/ticket/15796> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #15346: gnustep.cc should not be set
by MacPorts 22 Nov '10

22 Nov '10

#15346: gnustep.cc should not be set -----------------------------+---------------------------------------------- Reporter: fedor(a)qwest.net | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: gnustep | -----------------------------+---------------------------------------------- I'm trying to update the gnustep ports. One significant aspect of this is that, gnustep does not require the GNU gcc compiler. It can work fine with the standard Apple compiler. However I can't seem to change the default. Setting "gnustep.cc cc" in my Portfile doesn't seem to work. In any case, the real problem is that gnustep.cc should not be set at all. gnustep-make discovers and defines CC and passes this on to anything that is build with gnustep-make. So there could be a variant in the gnustep- make port to set CC to either the Apple or GNU compiler (and include the proper depends_lib if required), but there is no need to set CC for any other gnustep Portfile as it should get the CC defined in gnustep-make -- Ticket URL: <http://trac.macports.org/ticket/15346> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #15420: RFE: add gcc43 variant for pdftk
by MacPorts 14 Oct '10

14 Oct '10

#15420: RFE: add gcc43 variant for pdftk ---------------------------------+------------------------------------------ Reporter: jochen(a)macports.org | Owner: ryandesign(a)macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ Please add a gcc43 variant as in the attached patch -- Ticket URL: <http://trac.macports.org/ticket/15420> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 19

[MacPorts] #15752: firefox-x11 2.0.0.13 gmake no rule to make target "config/Makefile.in", needed by "config/Makefile"
by MacPorts 08 Oct '10

08 Oct '10

#15752: firefox-x11 2.0.0.13 gmake no rule to make target "config/Makefile.in", needed by "config/Makefile" -------------------------------------------+-------------------------------- Reporter: vaneijck(a)ill.eu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: firefox-x11 intel makefile.in | -------------------------------------------+-------------------------------- Hi, I can't get my firefox-x11 build on Leopard Macports 1.6 (intel macbook pro). On another computer I managed to get it going with firefox 2.0.0.7 even with the "build_number" error, so I think the problem is in the Makefile and not related to the build_number. Strangely, I've not found any bug-reports on this anywhere and I can't find any obvious reasons/problems inside the Makefile itself. I've tried a clean+install to recompile, doesn't work. Can anyone help or suggest where to look? thanks in advance, Lambert van Eijck ---> Building firefox-x11 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_firefox-x11/work/mozilla" && make all " returned error 2 Command output: cat: ./config/build_number: No such file or directory rm -f -rf ./dist/sdk rm -f -rf ./dist/include /opt/local/bin/gmake -C config export cat: ../config/build_number: No such file or directory gmake[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_firefox-x11/work/mozilla/config' gmake[1]: *** No rule to make target `config/Makefile.in', needed by `config/Makefile'. Stop. gmake[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_firefox-x11/work/mozilla/config' make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/15752> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #15790: Missing dependencies for Gerris
by MacPorts 07 Oct '10

07 Oct '10

#15790: Missing dependencies for Gerris -----------------------------+---------------------------------------------- Reporter: tom.duck(a)dal.ca | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gerris | -----------------------------+---------------------------------------------- The Gerris port is missing dependencies. If it would help, then I can address these with some instruction from you on the preferred approach. I have proposed solutions at the end. Here is what is missing: 1) If openmpi or some such thing is available for multiprocessing, Gerris will compile with it. It seems reasonable to include this as a variant. 2) The Gerris example program cylinder.gfs in /opt/local/share/doc/gerris/cylinder is dependent on the 'ppmtoy4m' utility provided by the mjpegtools,and the 'convert' utility from imagemagick. These are not listed as dependencies. Note: Execution instructions for each example program are given at http://gfs.sourceforge.net/examples/examples/index.html. 3) When running the example programs as described on the Web site, the output from Gerris is often piped to one of the GfsView companion programs. There is no port for GfsView at this time. 4) The example program pipeline also makes use of ppmtompeg, which is provided by the netpbm packages and not currently listed as a dependency. There may be other issues, but I won't know until these are addressed so that I can run the examples. One way to deal with issues 2-4 is to create an 'examples' variant that separately installs the example programs along with the dependencies. Alternatively, the examples can be installed as is, but with additional dependencies listed for the base install. If it would be help, then I can prepare a patch for Gerris and a new port for GfsView. Just please let me know which you consider to be the best alternative. -- Ticket URL: <http://trac.macports.org/ticket/15790> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15711: scons 0.98.4 fails to build latex files
by MacPorts 07 Oct '10

07 Oct '10

#15711: scons 0.98.4 fails to build latex files -------------------------------+-------------------------------------------- Reporter: jjakuze(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- $ scons --version SCons by Steven Knight et al.: script: v0.98.4.r2949, 2008/05/17 23:07:00, by knight on bangkok engine: v0.98.4.r2949, 2008/05/17 23:07:00, by knight on bangkok $ cat SConstruct dvi = DVI('example.tex') $ scons AttributeError: SConsEnvironment instance has no attribute 'DVI': -- Ticket URL: <http://trac.macports.org/ticket/15711> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15678: mysql_install_db5 failed
by MacPorts 07 Oct '10

07 Oct '10

#15678: mysql_install_db5 failed --------------------------------------------+------------------------------- Reporter: s.willkommer(a)techdivision.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: mysql_install_db5 failed mysql | --------------------------------------------+------------------------------- i'm trying this for about a couple of days without success. everytime the same error. but from the front. i've installed php5 apache2 and mysql5 with the this tutorial [http://samuraicoder.net/installing_php_and_mysql_leopard_macports_prealpha] Everything is fine but when i try to install the system db tables with following command {{{ sudo -u mysql mysql_install_db5 }}} i got this error {{{ Installing MySQL system tables... ERROR: 1062 Duplicate entry 'localhost-' for key 1 080619 17:35:19 [ERROR] Aborting 080619 17:35:19 [Note] /opt/local/libexec/mysqld: Shutdown complete Installation of system tables failed! Examine the logs in /opt/local/var/db/mysql5 for more information. You can try to start the mysqld daemon with: /opt/local/libexec/mysqld --skip-grant & and use the command line tool /opt/local/lib/mysql5/bin/mysql to connect to the mysql database and look at the grant tables: shell> /opt/local/lib/mysql5/bin/mysql -u root mysql mysql> show tables Try 'mysqld --help' if you have problems with paths. Using --log gives you a log in /opt/local/var/db/mysql5 that may be helpful. The latest information about MySQL is available on the web at http://www.mysql.com Please consult the MySQL manual section: 'Problems running mysql_install_db', and the manual section that describes problems on your OS. Another information source is the MySQL email archive. Please check all of the above before mailing us! And if you do mail us, you MUST use the /opt/local/lib/mysql5/bin/mysqlbug script! }}} If I try to connect I got an access denied error. I've tried to delete the databases under /opt/local/var/db/mysql5/ and installed again without success. I have the macports 1.6.0 an a mac osx completely new installed with all updates (10.5.3) . Last week we installed it on three other macs in our company and it works perfectly. Im totally helpless about that. Thanks for your help -- Ticket URL: <http://trac.macports.org/ticket/15678> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15621: Installation of epiphany fails on 10.4/PPC
by MacPorts 07 Oct '10

07 Oct '10

#15621: Installation of epiphany fails on 10.4/PPC --------------------------------------------------+------------------------- Reporter: dbonde+bugs+macosforge.org(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------------------+------------------------- Installation of epiphany fails on 10.4/PPC with the error message below: ./configure: line 22906: test: =: unary operator expected checking for poptStrippedArgv in -lpopt... yes checking popt.h usability... yes checking popt.h presence... yes checking for popt.h... yes checking pkg-config is at least version 0.9.0... yes checking for BONOBOUI... configure: error: Package requirements (libgnomecanvas-2.0 >= 1.116.0 libbonobo-2.0 >= 2.13.0 libgnome-2.0 >= 2.13.7 bonobo-activation-2.0 >= 2.13.0 libxml-2.0 >= 2.4.20 gconf-2.0 >= 1.1.9 gtk+-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0 gnome-vfs-2.0 >= 2.8.0 gnome-vfs-module-2.0 > 2.8.0) were not met: Package freetype2 was not found in the pkg-config search path. Perhaps you should add the directory containing `freetype2.pc' to the PKG_CONFIG_PATH environment variable Package 'freetype2', required by 'cairo', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables BONOBOUI_CFLAGS and BONOBOUI_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Error: The following dependencies failed to build: gnome-desktop libgnomeui libbonoboui py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-orbit startup-notification libgnomeprintui libgnomeprint bison libgnomecups Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/15621> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8