August 2008 - macports-tickets - lists.macosforge.org

Re: [MacPorts] #14403: New Port Request -- NBTScan
by MacPorts 07 Aug '08

07 Aug '08

#14403: New Port Request -- NBTScan --------------------------------+------------------------------------------- Reporter: amtor(a)hotmail.com | Owner: macsforever2000(a)macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by macsforever2000(a)macports.org) * cc: usx303(a)googlemail.com (removed) * milestone: Port Requests => Port Submissions -- Ticket URL: <http://trac.macports.org/ticket/14403#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

Re: [MacPorts] #14403: New Port Request -- NBTScan
by MacPorts 07 Aug '08

07 Aug '08

#14403: New Port Request -- NBTScan --------------------------------+------------------------------------------- Reporter: amtor(a)hotmail.com | Owner: macsforever2000(a)macports.org Type: enhancement | Status: assigned Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------+------------------------------------------- Changes (by macsforever2000(a)macports.org) * owner: macports-tickets(a)lists.macosforge.org => macsforever2000(a)macports.org * status: new => assigned -- Ticket URL: <http://trac.macports.org/ticket/14403#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

Re: [MacPorts] #13953: sqlite3 3.5.4 build failure
by MacPorts 07 Aug '08

07 Aug '08

#13953: sqlite3 3.5.4 build failure --------------------------------------+------------------------------------- Reporter: nadeem.shabir(a)gmail.com | Owner: mww(a)macports.org Type: defect | Status: reopened Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: --------------------------------------+------------------------------------- Comment (by corycollier(a)me.com) Replying to [comment:14 nicholas.faiz(a)gmail.com] > I ended up cleaning sqlite3 and it installed properly afterward. A cleanup after the initial install attempt was all I needed as well. For others, I started with a fresh install of MacPorts, and ran the following {{{ sudo port selfupdate (worked fine) sudo port install gawk (worked fine, but took a while to install dependencies) sudo port install nawk (worked fine) sudo port install php5 +apache2 +mysql5 +server (died at the sqlite3 install) }}} so, the following commands allowed me to get on with my life: {{{ sudo port clean sqlite3 sudo port build sqlite3 }}} after that I was able to complete my original need : {{{ sudo port install php5 +apache2 +mysql5 +server }}} -- Ticket URL: <http://trac.macports.org/ticket/13953#comment:15> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

[MacPorts] #16245: sudo port -v install texlive_base failes
by MacPorts 07 Aug '08

07 Aug '08

#16245: sudo port -v install texlive_base failes ----------------------------------------------+----------------------------- Reporter: jens.gerlach(a)first.fraunhofer.de | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ----------------------------------------------+----------------------------- When running sudo port -v install texlive_base om Mac OS X 10.5.4 I obtain the folling error message /bin/sh ../libtool --mode=link /usr/bin/gcc-4.0 -o xdvi-xaw.bin -L/opt/local/lib browser.o dvi-draw.o dvi-init.o dvisel.o encodings.o events.o filehist.o font-open.o gf.o hypertex.o image-magick.o mime.o my- snprintf.o my-vsnprintf.o pagehist.o pk.o print-internal.o psdps.o psgs.o psheader.o psnews.o read-mapfile.o search-internal.o special.o string- utils.o tfmload.o util.o vf.o xdvi.o xserver-info.o x_util.o ./gui/libgui.a ../../libs/t1lib/libt1.a ../../libs/t1lib/../type1/libtype1.a -L/usr/lib/ruby 1 -L/usr/X11/lib -lXaw -lXmu -lXt -lXp -lXext -lXpm -lX11 -liconv ../kpathsea/libkpathsea.la -lm /usr/bin/gcc-4.0 -o xdvi-xaw.bin browser.o dvi-draw.o dvi-init.o dvisel.o encodings.o events.o filehist.o font-open.o gf.o hypertex.o image-magick.o mime.o my-snprintf.o my-vsnprintf.o pagehist.o pk.o print-internal.o psdps.o psgs.o psheader.o psnews.o read-mapfile.o search-internal.o special.o string-utils.o tfmload.o util.o vf.o xdvi.o xserver-info.o x_util.o 1 -L/opt/local/lib ./gui/libgui.a ../../libs/t1lib/libt1.a ../../libs/t1lib/../type1/libtype1.a -L/usr/lib/ruby -L/usr/X11/lib -lXaw -lXmu -lXt -lSM -lICE -lXp -lXext -lXpm -lX11 -lXau -lXdmcp -liconv ../kpathsea/.libs/libkpathsea.a -lm i686-apple-darwin9-gcc-4.0.1: 1: No such file or directory make[2]: *** [xdvi-xaw.bin] Error 1 make[1]: *** [all] Error 1 make: *** [all] Error 1 Warning: the following items did not execute (for texlive_base): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/16245> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #16194: nmap 4.68: upgrade fails (missing include path)
by MacPorts 07 Aug '08

07 Aug '08

#16194: nmap 4.68: upgrade fails (missing include path) ---------------------------------+------------------------------------------ Reporter: vinc17(a)macports.org | Owner: opendarwin.org(a)darkart.com Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: nmap build | ---------------------------------+------------------------------------------ When upgrading nmap: {{{ [...] Compiling nmap rm -f nmap /usr/bin/g++-4.0 -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -Lnbase -Lnsock/src/ -o nmap main.o nmap.o targets.o tcpip.o nmap_error.o utils.o idle_scan.o osscan.o osscan2.o output.o scan_engine.o timing.o charpool.o services.o protocols.o nmap_rpc.o portlist.o NmapOps.o TargetGroup.o Target.o FingerPrintResults.o service_scan.o NmapOutputTable.o MACLookup.o nmap_tty.o nmap_dns.o traceroute.o portreasons.o nse_main.o nse_nsock.o nse_init.o nse_fs.o nse_nmaplib.o nse_debug.o nse_pcrelib.o nse_string.o -lnbase -lnsock -lpcre -lpcap -lssl -lcrypto libdnet-stripped/src/.libs/libdnet.a -llua -lm Compiling nse-standard-library ./libtool --tag=CC --silent --mode=compile /usr/bin/gcc-4.0 -no-cpp- precomp -O2 -Wall -fno-strict-aliasing -DHAVE_CONFIG_H -DNMAP_NAME=\"Nmap\" -DNMAP_URL=\"http://nmap.org\" -DNMAP_PLATFORM =\"powerpc-apple-darwin8.11.0\" -DNMAPDATADIR=\"/opt/local/share/nmap\" -DNMAPLIBEXECDIR=\"/opt/local/libexec/nmap\" -c bit.c In file included from bit.c:11: bit.h:6:21: error: lauxlib.h: No such file or directory bit.h:7:17: error: lua.h: No such file or directory [...] }}} I'd say that the problem is that -I/opt/local/include is missing. Indeed there was no problem in configure. From config.log: {{{ configure:7459: checking lua.h usability configure:7476: /usr/bin/gcc-4.0 -c -O2 -Ilibdnet-stripped/include -I/opt/local/include -I/opt/local/include -I/opt/local/include conftest.c >&5 configure:7482: $? = 0 configure:7496: result: yes configure:7500: checking lua.h presence configure:7515: /usr/bin/cpp-4.0 -Ilibdnet-stripped/include -I/opt/local/include -I/opt/local/include -I/opt/local/include conftest.c configure:7521: $? = 0 configure:7535: result: yes configure:7563: checking for lua.h configure:7571: result: yes }}} -- Ticket URL: <http://trac.macports.org/ticket/16194> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 11

[MacPorts] #16148: gd2 2.0.35 Configure error - build failure
by MacPorts 07 Aug '08

07 Aug '08

#16148: gd2 2.0.35 Configure error - build failure -----------------------------------------------------+---------------------- Reporter: bjorn(a)wasda.nl | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gd2 libtool automake autoconf configure | -----------------------------------------------------+---------------------- {{{ host193:aclocal bjorn$ sudo port install php5 +apache2 +fastcgi +imap +mysql5 +sqlite +pear +oracle ---> Configuring gd2 Error: Target org.macports.configure returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gd2/work/gd-2.0.35 && autoreconf" returned error 1 Command output: Makefile.am:18: Libtool library used but `LIBTOOL' is undefined Makefile.am:18: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' Makefile.am:18: to `configure.ac' and run `aclocal' and `autoconf' again. Makefile.am:18: If `AC_PROG_LIBTOOL' is in `configure.ac', make sure Makefile.am:18: its definition is in aclocal's search path. autoreconf: automake failed with exit status: 1 Error: The following dependencies failed to build: gd2 libmcrypt libxml2 libtool libxslt mhash mysql5 oracle-instantclient tiff Error: Status 1 encountered during processing. }}} gd2 needs to depend on libtool. Please add this as a dependency so that it will build. gd2 needs automake and autoconf too, so please add those too or the configure process will go wrong: {{{ ---> Fetching gd2 ---> Attempting to fetch gd-2.0.35.tar.bz2 from http://www.libgd.org/releases/ ---> Verifying checksum(s) for gd2 ---> Extracting gd2 ---> Applying patches to gd2 ---> Configuring gd2 Error: Target org.macports.configure returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gd2/work/gd-2.0.35 && autoreconf" returned error 1 Command output: configure.ac:46: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached ../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from... aclocal.m4:626: AC_LIBTOOL_COMPILER_OPTION is expanded from... aclocal.m4:4814: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from... aclocal.m4:2662: _LT_AC_LANG_C_CONFIG is expanded from... aclocal.m4:2661: AC_LIBTOOL_LANG_C_CONFIG is expanded from... aclocal.m4:91: AC_LIBTOOL_SETUP is expanded from... aclocal.m4:71: _AC_PROG_LIBTOOL is expanded from... aclocal.m4:36: AC_PROG_LIBTOOL is expanded from... configure.ac:46: the top level configure.ac:46: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:671: AC_LIBTOOL_LINKER_OPTION is expanded from... configure.ac:46: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:2739: _LT_AC_LANG_CXX_CONFIG is expanded from... aclocal.m4:2738: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from... aclocal.m4:1798: _LT_AC_TAGCONFIG is expanded from... configure.ac:46: warning: AC_CACHE_VAL(lt_prog_compiler_static_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached configure.ac:46: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:3902: _LT_AC_LANG_F77_CONFIG is expanded from... aclocal.m4:3901: AC_LIBTOOL_LANG_F77_CONFIG is expanded from... configure.ac:46: warning: AC_CACHE_VAL(lt_prog_compiler_static_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached configure.ac:46: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:4004: _LT_AC_LANG_GCJ_CONFIG is expanded from... aclocal.m4:4003: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from... configure.ac:46: warning: AC_CACHE_VAL(lt_prog_compiler_static_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached configure.ac:64: error: possibly undefined macro: AM_ICONV If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. autoreconf: /opt/local/bin/autoconf failed with exit status: 1 Error: The following dependencies failed to build: gd2 libmcrypt libxml2 libtool automake libxslt mhash mysql5 oracle-instantclient tiff Error: Status 1 encountered during processing. }}} If users want a quick fix for this problem: sudo port install autoconf automake libtool -- Ticket URL: <http://trac.macports.org/ticket/16148> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #16151: Erlang needs a patch to avoid couchdb database corruption
by MacPorts 07 Aug '08

07 Aug '08

#16151: Erlang needs a patch to avoid couchdb database corruption ------------------------------+--------------------------------------------- Reporter: jwa(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: High | Milestone: Component: ports | Version: 1.6.0 Keywords: erlang couchdb | ------------------------------+--------------------------------------------- Look at the explanation given here:[[BR]] http://www.erlang.org/pipermail/erlang-patches/2008-July/000258.html. This enhancement may be included in some later Erlang release, but currently it would help couchdb a lot (there have been several reports of database corruptions due to this feature). -- Ticket URL: <http://trac.macports.org/ticket/16151> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #16218: unable to build fpp on os x 10.4.11
by MacPorts 07 Aug '08

07 Aug '08

#16218: unable to build fpp on os x 10.4.11 ----------------------------------------+----------------------------------- Reporter: draine(a)astro.princeton.edu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: fpp | ----------------------------------------+----------------------------------- Tried to install fpp on my powerpc g4 running 10.4.11. Here's the result: draine@ourania2:~/work/linux> sudo port install fpp Password: ---> Building fpp with target all ---> Staging fpp into destroot Error: Target org.macports.destroot returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_fpp/work/fdfpp" && make install PREFIX=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_fpp/work/destroot/opt/local " returned error 2 Command output: Makefile:12: warning: overriding commands for target `all' Makefile:2: warning: ignoring old commands for target `all' install -m 755 all/fpp /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_fpp/work/destroot/opt/local/bin install: all/fpp: No such file or directory make: *** [install] Error 71 Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/16218> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15982: py25-sip: Install failure
by MacPorts 06 Aug '08

06 Aug '08

#15982: py25-sip: Install failure -----------------------------+---------------------------------------------- Reporter: tom.duck(a)dal.ca | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: py25-sip | -----------------------------+---------------------------------------------- py25-sip fails to install on my 10.4 Tiger system. Here is the build output: {{{ $ sudo port install py25-sip ---> Fetching py25-sip ---> Attempting to fetch sip-4.7.6.tar.gz from http://www.riverbankcomputing.com/static/Downloads/sip4/ ---> Verifying checksum(s) for py25-sip ---> Extracting py25-sip ---> Applying patches to py25-sip ---> Configuring py25-sip ---> Building py25-sip with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-sip/work/sip-4.7.6" && make all " returned error 2 Command output: cc -c -pipe -Os -w -I. -o main.o main.c cc -c -pipe -Os -w -I. -o transform.o transform.c cc -c -pipe -Os -w -I. -o gencode.o gencode.c cc -c -pipe -Os -w -I. -o export.o export.c cc -c -pipe -Os -w -I. -o heap.o heap.c cc -c -pipe -Os -w -I. -o parser.o parser.c cc -c -pipe -Os -w -I. -o lexer.o lexer.c c++ -F/opt/local/Library/Frameworks -L/opt/local/lib -o sip main.o transform.o gencode.o export.o heap.o parser.o lexer.o cc -c -pipe -fPIC -Os -w -I. -I/opt/local/include/python2.5 -o siplib.o siplib.c cc -c -pipe -fPIC -Os -w -I. -I/opt/local/include/python2.5 -o qtlib.o qtlib.c cc -c -pipe -fPIC -Os -w -I. -I/opt/local/include/python2.5 -o threads.o threads.c cc -c -pipe -fPIC -Os -w -I. -I/opt/local/include/python2.5 -o objmap.o objmap.c c++ -c -pipe -fPIC -Os -w -I. -I/opt/local/include/python2.5 -o bool.o bool.cpp c++ -F/opt/local/Library/Frameworks -L/opt/local/lib -bundle -framework Python -o sip.so siplib.o qtlib.o threads.o objmap.o bool.o /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols: _PyInt_AsSsize_t _PyInt_FromSsize_t collect2: ld returned 1 exit status make[1]: *** [sip.so] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. }}} -- Ticket URL: <http://trac.macports.org/ticket/15982> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 11

[MacPorts] #16226: py25-pytables 2.0.3 Download error
by MacPorts 06 Aug '08

06 Aug '08

#16226: py25-pytables 2.0.3 Download error ------------------------------------+--------------------------------------- Reporter: lordmiss(a)lordmiss.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: python, pytables, hdf5 | ------------------------------------+--------------------------------------- 'port install py25-pytables' doesn't work because there is no file with version 2.0.3. PyTables download link has only 2.0.4 source file. So, I made this patch file. -- Ticket URL: <http://trac.macports.org/ticket/16226> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3