November 2009 - macports-tickets - lists.macosforge.org

[MacPorts] #18892: Compiling PHP mcrypt extension against libmcrypt has issues
by MacPorts 28 May '12

28 May '12

#18892: Compiling PHP mcrypt extension against libmcrypt has issues ---------------------------------------+------------------------------------ Reporter: perl.programmer@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Low | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: libmcrypt ---------------------------------------+------------------------------------ Following the steps detailed [http://michaelgracie.com/2008/12/26 /plugging-mcrypt-into-php-on-leopard-10.5.6/ here], I tried to install the php mcrypt extension so I wouldn't have to re-compile all of php. However, if a replace the libmcrypt installation steps with a macports install of libmcrypt, when PHP is loaded through Apache, the mcrypt extension fails to load. However, it does load when I run php from the command line. I had to modify the {{{./configure}}} command a little bit to point to where libmcrypt is and to remove some of the unsupported archs. However, when I install libmcrypt from source, I don't have any of these problems and I don't have to change php.ini either. It may be that my machine is configured oddly, but I figured I would report the issue anyways in case it can be replicated. The configure command: {{{ MACOSX_DEPLOYMENT_TARGET=10.5 CFLAGS='-O2 -fno-common -arch i386' LDFLAGS='-L/opt/local/lib -L/usr/local/lib' CXXFLAGS='-O2 -fno-common -arch i386' \ ./configure --with-php-config=/Developer/SDKs/MacOSX10.5.sdk/usr/bin/php- config --with-mcrypt=/opt/local }}} -- Ticket URL: <http://trac.macports.org/ticket/18892> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #19506: php5-gtk: move to php category, use php5extension portgroup
by MacPorts 19 May '12

19 May '12

#19506: php5-gtk: move to php category, use php5extension portgroup -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: anant@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: php5-gtk -------------------------------------+-------------------------------------- I'd like to modify php5-gtk so it uses the new php5extension portgroup. The portgroup may still need to be enhanced a little to accommodate the fact that php5-gtk has a different .so name. I'd also like to move php5-gtk to the new top-level category php. I think the categories www and lang can also be removed, since gtk isn't a language and isn't to do with the web. (gtk isn't even necessarily x11 anymore, when it has the quartz variant, but I guess we'll keep the x11 category since that's where gtk2 still is.) If there is no objection I'll make these changes. -- Ticket URL: <http://trac.macports.org/ticket/19506> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #20460: php5-gtk 2.0.1 doesn't build with php 5.3.0: error: duplicate 'static'
by MacPorts 19 May '12

19 May '12

#20460: php5-gtk 2.0.1 doesn't build with php 5.3.0: error: duplicate 'static' -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: anant@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: php5-gtk -------------------------------------+-------------------------------------- php5-gtk 2.0.1 doesn't build with php 5.3.0: {{{ ---> Building php5-gtk DEBUG: Executing org.macports.build (php5-gtk) DEBUG: port allows a parallel build DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.4' DEBUG: Assembled command: 'cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1" && nice -n 10 make all' /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/libtool --mode=compile /usr/bin/gcc-4.0 -I./ext/gtk+/ -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/./ext/gtk+/ -DPHP_ATOM_INC -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/main -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1 -I/mp/include/php -I/mp/include/php/main -I/mp/include/php/TSRM -I/mp/include/php/Zend -I/mp/include/php/ext -I/mp/include/php/ext/date/lib -I/mp/include/glib-2.0 -I/mp/lib/glib-2.0/include -I/mp/include -I/mp/include/gtk-2.0 -I/mp/lib/gtk-2.0/include -I/mp/include/atk-1.0 -I/mp/include/cairo -I/mp/include/pango-1.0 -I/mp/include/pixman-1 -I/mp/include/freetype2 -I/mp/include/libpng12 -I/mp/include/libglade-2.0 -I/mp/include/libxml2 -I/mp/include -DHAVE_CONFIG_H -O2 -c /mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/./ext/gtk+/php_gtk+.c -o ./ext/gtk+/php_gtk+.lo mkdir ./ext/gtk+/.libs /usr/bin/gcc-4.0 -I./ext/gtk+/ -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/./ext/gtk+/ -DPHP_ATOM_INC -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/main -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1 -I/mp/include/php -I/mp/include/php/main -I/mp/include/php/TSRM -I/mp/include/php/Zend -I/mp/include/php/ext -I/mp/include/php/ext/date/lib -I/mp/include/glib-2.0 -I/mp/lib/glib-2.0/include -I/mp/include -I/mp/include/gtk-2.0 -I/mp/lib/gtk-2.0/include -I/mp/include/atk-1.0 -I/mp/include/cairo -I/mp/include/pango-1.0 -I/mp/include/pixman-1 -I/mp/include/freetype2 -I/mp/include/libpng12 -I/mp/include/libglade-2.0 -I/mp/include/libxml2 -I/mp/include -DHAVE_CONFIG_H -O2 -c /mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/./ext/gtk+/php_gtk+.c -fno-common -DPIC -o ./ext/gtk+/.libs/php_gtk+.o /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/libtool --mode=compile /usr/bin/gcc-4.0 -Iext/gtk+/ -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/ext/gtk+/ -DPHP_ATOM_INC -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/main -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1 -I/mp/include/php -I/mp/include/php/main -I/mp/include/php/TSRM -I/mp/include/php/Zend -I/mp/include/php/ext -I/mp/include/php/ext/date/lib -I/mp/include/glib-2.0 -I/mp/lib/glib-2.0/include -I/mp/include -I/mp/include/gtk-2.0 -I/mp/lib/gtk-2.0/include -I/mp/include/atk-1.0 -I/mp/include/cairo -I/mp/include/pango-1.0 -I/mp/include/pixman-1 -I/mp/include/freetype2 -I/mp/include/libpng12 -I/mp/include/libglade-2.0 -I/mp/include/libxml2 -I/mp/include -DHAVE_CONFIG_H -O2 -c ext/gtk+/gen_atk.c -o ext/gtk+/gen_atk.lo /usr/bin/gcc-4.0 -Iext/gtk+/ -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/ext/gtk+/ -DPHP_ATOM_INC -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1/main -I/mp/var/macports/build/_Users_rschmidt_macports_dports_php_php5-gtk/work /php-gtk-2.0.1 -I/mp/include/php -I/mp/include/php/main -I/mp/include/php/TSRM -I/mp/include/php/Zend -I/mp/include/php/ext -I/mp/include/php/ext/date/lib -I/mp/include/glib-2.0 -I/mp/lib/glib-2.0/include -I/mp/include -I/mp/include/gtk-2.0 -I/mp/lib/gtk-2.0/include -I/mp/include/atk-1.0 -I/mp/include/cairo -I/mp/include/pango-1.0 -I/mp/include/pixman-1 -I/mp/include/freetype2 -I/mp/include/libpng12 -I/mp/include/libglade-2.0 -I/mp/include/libxml2 -I/mp/include -DHAVE_CONFIG_H -O2 -c ext/gtk+/gen_atk.c -fno-common -DPIC -o ext/gtk+/.libs/gen_atk.o ext/gtk+/gen_atk.c:272: error: duplicate 'static' ext/gtk+/gen_atk.c:277: error: duplicate 'static' ext/gtk+/gen_atk.c:282: error: duplicate 'static' ext/gtk+/gen_atk.c:287: error: duplicate 'static' ext/gtk+/gen_atk.c:292: error: duplicate 'static' ext/gtk+/gen_atk.c:298: error: duplicate 'static' ext/gtk+/gen_atk.c:303: error: duplicate 'static' ext/gtk+/gen_atk.c:308: error: duplicate 'static' ext/gtk+/gen_atk.c:313: error: duplicate 'static' ext/gtk+/gen_atk.c:318: error: duplicate 'static' ext/gtk+/gen_atk.c:440: error: duplicate 'static' ext/gtk+/gen_atk.c:445: error: duplicate 'static' ext/gtk+/gen_atk.c:722: error: duplicate 'static' ext/gtk+/gen_atk.c:727: error: duplicate 'static' ext/gtk+/gen_atk.c:732: error: duplicate 'static' ext/gtk+/gen_atk.c:737: error: duplicate 'static' ext/gtk+/gen_atk.c:742: error: duplicate 'static' ext/gtk+/gen_atk.c:747: error: duplicate 'static' ext/gtk+/gen_atk.c:791: error: duplicate 'static' ext/gtk+/gen_atk.c:829: error: duplicate 'static' ext/gtk+/gen_atk.c:923: error: duplicate 'static' ext/gtk+/gen_atk.c:929: error: duplicate 'static' ext/gtk+/gen_atk.c:934: error: duplicate 'static' ext/gtk+/gen_atk.c:999: error: duplicate 'static' ext/gtk+/gen_atk.c:1147: error: duplicate 'static' ext/gtk+/gen_atk.c:1152: error: duplicate 'static' ext/gtk+/gen_atk.c:1157: error: duplicate 'static' ext/gtk+/gen_atk.c:1162: error: duplicate 'static' ext/gtk+/gen_atk.c:1167: error: duplicate 'static' ext/gtk+/gen_atk.c:1172: error: duplicate 'static' ext/gtk+/gen_atk.c:1341: error: duplicate 'static' ext/gtk+/gen_atk.c:1346: error: duplicate 'static' ext/gtk+/gen_atk.c:1351: error: duplicate 'static' ext/gtk+/gen_atk.c:1356: error: duplicate 'static' ext/gtk+/gen_atk.c:1361: error: duplicate 'static' ext/gtk+/gen_atk.c:1366: error: duplicate 'static' make: *** [ext/gtk+/gen_atk.lo] Error 1 }}} The php5-gtk homepage said in May 2009 that the next version will support php 5.3, so it seems to be known that the current version does not. -- Ticket URL: <http://trac.macports.org/ticket/20460> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #17193: Ports using libungif should be switched to use giflib instead
by MacPorts 18 May '12

18 May '12

#17193: Ports using libungif should be switched to use giflib instead ------------------------------------------+--------------------------------- Reporter: macsforever2000(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Keywords: | Port: libungif giflib ------------------------------------------+--------------------------------- libungif is no longer necessary since the last of the LZW patents [http://en.wikipedia.org/wiki/Gif expired] on July 7, 2004. Since the libungif and giflib ports conflict, all ports using libungif should switch to use the preferred giflib instead. A quick run of {{{ port echo depends:libungif }}} shows the following list of ports needs to be updated: {{{ AfterStep camlimages driftnet evas gnustep-gui gtk-canvas magicpoint MPlayer qt4-x11 salasaga simage swftools windowmaker xv }}} But that list is incomplete. It does not include ports that refer to it using "lib:libungif:libungif" syntax. -- Ticket URL: <http://trac.macports.org/ticket/17193> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 22

[MacPorts] #19390: RFE: Use muniversal PortGroup to build giflib
by MacPorts 18 May '12

18 May '12

#19390: RFE: Use muniversal PortGroup to build giflib -----------------------------------+---------------------------------------- Reporter: mcalhoun@… | Owner: ryandesign@… Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.1 Keywords: universal | Port: giflib -----------------------------------+---------------------------------------- Attached is a proposed change to the universal build of giflib. -- Ticket URL: <http://trac.macports.org/ticket/19390> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #20462: giflib 4.1.6 - variant no_x11 with strange behaviour
by MacPorts 18 May '12

18 May '12

#20462: giflib 4.1.6 - variant no_x11 with strange behaviour ---------------------------------------+------------------------------------ Reporter: benjamin.seppke@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: ---------------------------------------+------------------------------------ When building the giflib port with the variant no_x11 using: > port install giflib +no_x11 the result differs from that one, I'd expect. Looking at the dependencies of the compiled giflib, I get: > otool -L /opt/local/lib/libgif.4.1.6.dylib /opt/local/lib/libgif.4.1.6.dylib: /opt/local/lib/libgif.4.dylib /opt/local/lib/libX11.6.dylib /opt/local/lib/libXau.6.dylib /opt/local/lib/libXdmcp.6.dylib /usr/lib/libgcc_s.1.dylib /usr/lib/libSystem.B.dylib As you can see, the X11-bindings are still present, although the /opt/local/lib/libSM.6.dylib and /opt/local/lib/libICE.6.dylib bindings have disappeared. If I build the giflib on my own using >./configure --prefix=/opt/local/ --without-x --without-sm , I will get the right results (a dylib without any references to x11) so I tried to edit the portfile itself like this: variant no_x11 { depends_lib-delete port:xorg-libsm depends_lib-delete port:xorg-libX11 configure.args-append --without-x configure.args-append --without-sm } However, this also didn't work ... I would be very grateful for any help! -- Ticket URL: <http://trac.macports.org/ticket/20462> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #20046: pcre++ rename to pcrexx for consistency and safety
by MacPorts 17 May '12

17 May '12

#20046: pcre++ rename to pcrexx for consistency and safety ------------------------------+--------------------------------------------- Reporter: blb@… | Owner: gwright@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: pcre++ ------------------------------+--------------------------------------------- Other C++-type ports with ++ in the names have those plus signs replaced by '''x''' (eg [browser:trunk/dports/devel/libsigcxx2/Portfile libsigcxx2], [browser:trunk/dports/textproc/libxmlxx2/Portfile libxmlxx2]) to avoid potential issues with a standard regex character. It would appear it has no dependents, once I escaped the pluses in {{{port echo depends:pcre\\+\\+}}} so I'm guessing it shouldn't be too painful. -- Ticket URL: <http://trac.macports.org/ticket/20046> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #15920: menu meters cannot install
by MacPorts 14 May '12

14 May '12

#15920: menu meters cannot install ---------------------------------+------------------------------------------ Reporter: dstwo(a)princeton.edu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ sudo port install menumeters Password: ---> Fetching MenuMeters ---> Attempting to fetch MenuMeters.tar.gz from http://www.ragingmenace.com/software/download ---> Verifying checksum(s) for MenuMeters ---> Extracting MenuMeters ---> Configuring MenuMeters ---> Building MenuMeters with target -target PrefPane Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_aqua_MenuMeters/work/MenuMeters-1.3" && /usr/bin/xcodebuild -target PrefPane build INSTALL_MODE_FLAG=go-w,a+rX " returned error 1 Command output: === BUILDING NATIVE TARGET MenuCracker WITH THE DEFAULT CONFIGURATION (Release) === Checking Dependencies... error: There is no SDK at specified SDKROOT_ppc path '/Developer/SDKs/MacOSX10.3.9.sdk' ** BUILD FAILED ** Error: Status 1 encountered during processing. ~ $ uname -a Darwin daniel-schwartz-narbonnes-macbook-air.local 9.4.0 Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386 i386 -- Ticket URL: <http://trac.macports.org/ticket/15920> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #19556: gcc44, add graphite support
by MacPorts 08 May '12

08 May '12

#19556: gcc44, add graphite support --------------------------------+------------------------------------------- Reporter: bcbarnes@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: graphite | Port: gcc44 --------------------------------+------------------------------------------- GCC 4.4 adds support for advanced loop optimizations in the "graphite" branch of the compiler. These are not compiled by default, but could be extremely useful for people doing numerical/scientific work. http://gcc.gnu.org/gcc-4.4/changes.html instructions for building the graphite branch are here: http://gcc.gnu.org/wiki/Graphite_Build Could we get a variant of the gcc44 port which supports graphite, or perhaps even enable it by default? Thanks! -- Ticket URL: <http://trac.macports.org/ticket/19556> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #22010: Crashes at startup
by MacPorts 07 May '12

07 May '12

#22010: Crashes at startup -----------------------------------+---------------------------------------- Reporter: Damien@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: crash, startup | Port: inkscape-devel -----------------------------------+---------------------------------------- Defaults variants are "+ipv6 +quartz +no_x11 -x11 +nls +tls +ssl +with_default_names +ares +idn +aqua +bash_completion +adns +aspell " on iMacIntel. In X11.app (2.4), from a terminal : {{{ $ port installed | grep inkscape inkscape-devel @0.46.22157_0+no_x11 (active) $ inkscape (inkscape:83509): GLib-GObject-CRITICAL **: g_object_ref: assertion `object->ref_count > 0' failed (inkscape:83509): GLib-GObject-CRITICAL **: g_object_ref: assertion `object->ref_count > 0' failed 2009-10-12 13:34:27.894 inkscape[83509:903] InjectEventHandler }}} At this point, inkscape is ready to be used (the interface is displayed on the screen) But when clicking anywhere in inkscape makes a window appear, saying "Inkscape a subi une erreur inter et va se fermer maintenant". And in the terminal, the following is written: {{{ Emergency save activated! Emergency save completed. Inkscape will close now. If you can reproduce this crash, please file a bug at www.inkscape.org with a detailed description of the steps leading to the crash, so we can fix it. ^C }}} The only solution is to ^C for killing it. -- Ticket URL: <http://trac.macports.org/ticket/22010> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6