November 2009 - macports-tickets - lists.macosforge.org

[MacPorts] #16113: OpenSceneGraph should use MacPorts curl, not Mac OS X's
by MacPorts 28 Jul '14

28 Jul '14

#16113: OpenSceneGraph should use MacPorts curl, not Mac OS X's -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- Parts of OpenSceneGraph link with /usr/lib/libcurl.3.dylib. This should be changed so that it depends on libcurl as provided by MacPorts, and a dependency on port:curl should be added. -- Ticket URL: <http://trac.macports.org/ticket/16113> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #22167: nethack runs as root
by MacPorts 25 Jul '14

25 Jul '14

#22167: nethack runs as root ---------------------------------------+------------------------------------ Reporter: adam.gc.watkins@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: nethack ---------------------------------------+------------------------------------ Nethack runs as root, via setuid on '/opt/local/share/nethackdir/nethack'. It might sensible to setgid as 'games' or similar and set permissions appropriately elsewhere, but to run nethack as root by default is insane from a security perspective. -- Ticket URL: <http://trac.macports.org/ticket/22167> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #20652: 'segmented downloading' for fetch
by MacPorts 22 Jul '14

22 Jul '14

#20652: 'segmented downloading' for fetch ----------------------------------------+----------------------------------- Reporter: macports.users@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: base | Version: 1.7.1 Keywords: fetch, axel, curl, libcurl | Port: ----------------------------------------+----------------------------------- -- Ticket URL: <http://trac.macports.org/ticket/20652> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #18869: py25-docutils does not include roman.py
by MacPorts 21 Jul '14

21 Jul '14

#18869: py25-docutils does not include roman.py ---------------------------------------+------------------------------------ Reporter: swinbank@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: py25-docutils ---------------------------------------+------------------------------------ Hence: {{{ $ rst2html.py Traceback (most recent call last): File "/opt/local/bin/rst2html.py", line 23, in <module> publish_cmdline(writer_name='html', description=description) File "/opt/local/lib/python2.5/site-packages/docutils/core.py", line 334, in publish_cmdline pub.set_components(reader_name, parser_name, writer_name) File "/opt/local/lib/python2.5/site-packages/docutils/core.py", line 92, in set_components self.set_reader(reader_name, self.parser, parser_name) File "/opt/local/lib/python2.5/site-packages/docutils/core.py", line 82, in set_reader self.reader = reader_class(parser, parser_name) File "/opt/local/lib/python2.5/site- packages/docutils/readers/__init__.py", line 49, in __init__ self.set_parser(parser_name) File "/opt/local/lib/python2.5/site- packages/docutils/readers/__init__.py", line 60, in set_parser parser_class = parsers.get_parser_class(parser_name) File "/opt/local/lib/python2.5/site- packages/docutils/parsers/__init__.py", line 46, in get_parser_class module = __import__(parser_name, globals(), locals()) File "/opt/local/lib/python2.5/site- packages/docutils/parsers/rst/__init__.py", line 75, in <module> from docutils.parsers.rst import states File "/opt/local/lib/python2.5/site- packages/docutils/parsers/rst/states.py", line 108, in <module> import roman ImportError: No module named roman }}} I note that it '''is''' included with py26-docutils. -- Ticket URL: <http://trac.macports.org/ticket/18869> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #18044: py-postgresql-pqueue: update to 1.0.1
by MacPorts 21 Jul '14

21 Jul '14

#18044: py-postgresql-pqueue: update to 1.0.1 -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: py-postgresql-pqueue -------------------------------------+-------------------------------------- py-postgresql-pqueue is at version 0.1 but version 1.0.1 appears to be out so the port should probably be updated. -- Ticket URL: <http://trac.macports.org/ticket/18044> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #21862: Unison +aqua fails to build on the 64-bit system
by MacPorts 17 Jul '14

17 Jul '14

#21862: Unison +aqua fails to build on the 64-bit system ---------------------------------------+------------------------------------ Reporter: kiyoshi.coquser@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: ---------------------------------------+------------------------------------ Unison aqua variant fails to build on the 64-bit system because it is not 64-bit clean. I built minimal patch to fix this issue. This patch and fixed ocaml (Ticket #21743) will make Unison +aqua also work on the 64-bit system. NOTE: 1. This patch upgrades Unison from 2.27.57 to 2.32.52, and they CAN NOT synchronize files with each other. To avoid the confusion about connection failure, It my be as well to create an new port with different name like "unison-2.32". 2. This is not the official patch. this issue will be fixed smarter way at the future version of Unison. -- Ticket URL: <http://trac.macports.org/ticket/21862> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 12

[MacPorts] #21806: Wireshark no_x11 installs without GUI
by MacPorts 09 Jul '14

09 Jul '14

#21806: Wireshark no_x11 installs without GUI --------------------------------------+------------------------------------- Reporter: lkraider+ports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: --------------------------------------+------------------------------------- I have gtk2 installed as +no_x11 +quartz -x11 After trying to install wireshark, it builds without gui, because no_x11 disables gtk2 in its Portfile. Trying to set -no_x11 doesn't work since gtk2 is already built with it enabled, and port returns an error for that. Since the build works fine with gtk2 +no_x11, I propose the '''no_x11''' be renamed to '''no_gui''' on the wireshark Portfile. -- Ticket URL: <http://trac.macports.org/ticket/21806> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #20053: Document the port naming convention of replacing ++ with xx
by MacPorts 04 Jul '14

04 Jul '14

#20053: Document the port naming convention of replacing ++ with xx ------------------------------+--------------------------------------------- Reporter: blb@… | Owner: markd@… Type: defect | Status: new Priority: Normal | Milestone: Component: guide | Version: 1.8.0 Keywords: | Port: ------------------------------+--------------------------------------------- Several ports whose "true" name have ++ in their names (libsigc++, libxml++, mysql++, and others) have the plus signs replaced with the letter x (libsigcxx2, libxmlxx, mysqlxx). This is the convention we've picked (and is also used in other project names directly like libpqxx), but we have no current documentation for it in the guide. This should be added someplace. -- Ticket URL: <http://trac.macports.org/ticket/20053> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #20377: iTerm: build fail
by MacPorts 04 Jul '14

04 Jul '14

#20377: iTerm: build fail -------------------------------+-------------------------------------------- Reporter: nefar@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: iTerm -------------------------------+-------------------------------------------- See attached log -- Ticket URL: <http://trac.macports.org/ticket/20377> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 14

[MacPorts] #20775: gnustep-base: gnustep-config: command not found
by MacPorts 02 Jul '14

02 Jul '14

#20775: gnustep-base: gnustep-config: command not found -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: gnustep-base -------------------------------------+-------------------------------------- I can't seem to install gnustep-base on (Mac OS X 10.4.11 Intel) because it cannot find gnustep-config: {{{ $ port install Etoile ---> Fetching gnustep-make ---> Attempting to fetch gnustep-make-2.2.0.tar.gz from http://distfiles.macports.org/gnustep-make ---> Verifying checksum(s) for gnustep-make ---> Extracting gnustep-make ---> Configuring gnustep-make ---> Building gnustep-make ---> Staging gnustep-make into destroot Warning: gnustep-make requests to install files outside the common directory structure! ---> Installing gnustep-make @2.2.0_0+gnustep_layout ########################################################## To have a fully working GNUstep make system, please add '. /mp/GNUstep/System/Library/Makefiles/GNUstep.sh' to your shell login (in ~/.profile) You may also want to set up your MANPATH : export MANPATH=$GNUSTEP_LOCAL_ROOT/Library/Documentation/man:$GNUSTEP_SYSTEM_ROOT/Library/Documentation/man:/mp/share/man:/usr/share/man ########################################################## ---> Activating gnustep-make @2.2.0_0+gnustep_layout ---> Cleaning gnustep-make ---> Fetching gnustep-base ---> Attempting to fetch gnustep-base-1.19.1.tar.gz from http://distfiles.macports.org/gnustep-base ---> Verifying checksum(s) for gnustep-base ---> Extracting gnustep-base ---> Applying patches to gnustep-base Warning: reinplace s|GNUSTEP_INSTALLATION_DIR = $(GNUSTEP_SYSTEM_ROOT)|GNUSTEP_INSTALLATION_DOMAIN=SYSTEM|g didn't change anything in /mp/var/macports/build /_Users_rschmidt_macports_dports_gnustep_gnustep-base/work/gnustep- base-1.19.1/GNUmakefile ---> Configuring gnustep-base Error: Target org.macports.configure returned: configure failure: shell command " cd "/mp/var/macports/build /_Users_rschmidt_macports_dports_gnustep_gnustep-base/work/gnustep- base-1.19.1" && ./configure --prefix=/mp CC=gcc-mp-4.2 GNUSTEP_MAKEFILES=/mp/share/GNUstep/Makefiles --disable-tls --enable- libffi --with-ffi-include=/mp/include/gcc42 --with-ffi- library=/mp/lib/gcc42 " returned error 1 Command output: ./configure: line 1: gnustep-config: command not found configure: error: cannot find install-sh or install.sh in /mp/share/GNUstep/Makefiles .//mp/share/GNUstep/Makefiles Error: The following dependencies failed to build: SQLClient Performance gnustep-base oniguruma5 poppler openjpeg poppler-data Error: Status 1 encountered during processing. $ }}} -- Ticket URL: <http://trac.macports.org/ticket/20775> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 28