December 2009 - macports-tickets - lists.macosforge.org

[MacPorts] #21949: icu +universal is broken
by MacPorts 02 Dec '09

02 Dec '09

#21949: icu +universal is broken -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: nox@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: yaz -------------------------------------+-------------------------------------- I'm on Snow Leopard trying to build icu +universal (universal_archs is x86_64 i386). It builds and install just fine, but the files it installs are not. For example, it installs ${prefix}/bin/icu-config, but it is not executable. This causes programs like yaz which require icu to fail to find it. icu-config is installed non-executable because it has been merged by the muniversal merger, because the i386 and x86_64 files differed. The merger has also inserted C compiler directives into the file, e.g.: {{{ #ifndef __LP64__ CFLAGS="-O2 -arch i386 -O2 -Wall -ansi -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long ${THREADSCFLAGS} " #else /* __LP64__ */ CFLAGS="-O2 -arch x86_64 -O2 -Wall -ansi -pedantic -Wshadow -Wpointer- arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long ${THREADSCFLAGS} " #endif /* __LP64__ */ }}} Since this is a bash script and not a C file, however, these are just treated as comments and ignored. To bash, this just looks like you're setting CFLAGS, then setting it again to a different value. (Lines beginning with "#" are ignored.) In this particular file, the resolution is probably to remove the -arch flags entirely. However there are other files icu +universal installs which need similar attention. I suggest you install icu both universal and non-universal, then diff the two directories in ${prefix}/var/macports/software/icu to see all the differences. -- Ticket URL: <http://trac.macports.org/ticket/21949> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #22650: muniversal should compare contents of compressed files, not the compressed files themselves
by MacPorts 02 Dec '09

02 Dec '09

#22650: muniversal should compare contents of compressed files, not the compressed files themselves -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: mcalhoun@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: -------------------------------------+-------------------------------------- When compressed (e.g. gz or bz2) files are in the destroots, muniversal compares them as it would any other file, sees that they differ, and doesn't know how to merge them. Instead, it should compare the contents of the compressed files, because chances are the contents are the same. -- Ticket URL: <http://trac.macports.org/ticket/22650> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #20072: id3v2 should be using configure.cxx
by MacPorts 02 Dec '09

02 Dec '09

#20072: id3v2 should be using configure.cxx -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: brent@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: id3v2 -------------------------------------+-------------------------------------- {{{ ---> Building id3v2 DEBUG: Executing org.macports.build (id3v2) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.4' DEBUG: Assembled command: 'cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_audio_id3v2/work/id3v2-0.1.11" && nice -n 10 make all' g++ -I/mp/include/ -DVERSION="\"0.1.11\"" -c -o convert.o convert.cpp g++ -I/mp/include/ -DVERSION="0.1.11" -c -o convert.o convert.cpp g++: Error: You should be using ${configure.cxx} See http://trac.macports.org/wiki/UsingTheRightCompiler make: *** [convert.o] Error 1 }}} The attached patch fixes this. If there are no objections, I'm happy to commit it. -- Ticket URL: <http://trac.macports.org/ticket/20072> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #19527: RFE for lzo2: Remove '--disable-static' from configure.args
by MacPorts 02 Dec '09

02 Dec '09

#19527: RFE for lzo2: Remove '--disable-static' from configure.args --------------------------------+------------------------------------------- Reporter: perry@… | Owner: yunzheng.hu@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: lzo2 --------------------------------+------------------------------------------- I've attached a trivial patch that removes '--disable-static' from configure.args. Is there any reason why static libraries are disabled by default? -- Ticket URL: <http://trac.macports.org/ticket/19527> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #21953: muniversal portgroup should never attempt to merge pkg-config .pc files or -config scripts
by MacPorts 01 Dec '09

01 Dec '09

#21953: muniversal portgroup should never attempt to merge pkg-config .pc files or -config scripts -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: mcalhoun@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: -------------------------------------+-------------------------------------- The muniversal portgroup should never attempt to merge certain kinds of files, including pkg-config .pc files (see #19953, #20727, #21583, #21605, #21648) and -config scripts (see #21398, #21461, #21653, #21949). This issue is particularly problematic because the affected port installs as if nothing is wrong. It's not until later, when you try to install a port that depends on this one, that you encounter a problem, and it takes some time then to understand the problem. -- Ticket URL: <http://trac.macports.org/ticket/21953> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #22742: py26-matplotlib +qt4 runtime error
by MacPorts 01 Dec '09

01 Dec '09

#22742: py26-matplotlib +qt4 runtime error ------------------------------------------+--------------------------------- Reporter: macsforever2000@… | Owner: ram@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: py26-matplotlib ------------------------------------------+--------------------------------- I see the following error when i try to use the qt4agg backend in py26-matplotlib. {{{ File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/backends/backend_qt4agg.py", line 130, in draw FigureCanvasAgg.draw(self) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/backends/backend_agg.py", line 314, in draw self.figure.draw(self.renderer) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/artist.py", line 46, in draw_wrapper draw(artist, renderer, *kl) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/figure.py", line 773, in draw for a in self.axes: a.draw(renderer) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/artist.py", line 46, in draw_wrapper draw(artist, renderer, *kl) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/axes.py", line 1735, in draw a.draw(renderer) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/artist.py", line 46, in draw_wrapper draw(artist, renderer, *kl) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/axis.py", line 742, in draw tick.draw(renderer) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/artist.py", line 46, in draw_wrapper draw(artist, renderer, *kl) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/axis.py", line 196, in draw self.label1.draw(renderer) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/text.py", line 515, in draw bbox, info = self._get_layout(renderer) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/text.py", line 272, in _get_layout 'lp', self._fontproperties, ismath=False) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/backends/backend_agg.py", line 158, in get_text_width_height_descent font = self._get_agg_font(prop) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/backends/backend_agg.py", line 195, in _get_agg_font fname = findfont(prop) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/font_manager.py", line 1304, in findfont _rebuild() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/font_manager.py", line 1288, in _rebuild fontManager = FontManager() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/font_manager.py", line 980, in __init__ self.ttffiles = findSystemFonts(paths) + findSystemFonts() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/font_manager.py", line 337, in findSystemFonts for f in get_fontconfig_fonts(fontext): File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/matplotlib/font_manager.py", line 299, in get_fontconfig_fonts output = pipe.communicate()[0] File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/subprocess.py", line 686, in communicate self.wait() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/subprocess.py", line 1157, in wait pid, sts = os.waitpid(self.pid, 0) OSError: [Errno 4] Interrupted system call }}} {{{ $ port installed py26-matplotlib The following ports are currently installed: py26-matplotlib @0.99.1.1_1+cairo+ghostscript+gtk2+latex+qt4+tkinter (active) }}} Any ideas? -- Ticket URL: <http://trac.macports.org/ticket/22742> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #22720: Leiningen
by MacPorts 01 Dec '09

01 Dec '09

#22720: Leiningen --------------------------------+------------------------------------------- Reporter: ian.eure@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: --------------------------------+------------------------------------------- The attached files add a port for Leiningen, a Clojure build tool. -- Ticket URL: <http://trac.macports.org/ticket/22720> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #22719: Maven-Ant-Tasks
by MacPorts 01 Dec '09

01 Dec '09

#22719: Maven-Ant-Tasks --------------------------------+------------------------------------------- Reporter: ian.eure@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: --------------------------------+------------------------------------------- The attached Portfile adds the maven-ant-tasks port. -- Ticket URL: <http://trac.macports.org/ticket/22719> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #22718: Clojure-Contrib-Devel
by MacPorts 01 Dec '09

01 Dec '09

#22718: Clojure-Contrib-Devel --------------------------------+------------------------------------------- Reporter: ian.eure@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: --------------------------------+------------------------------------------- This Portfile adds a clojure-contrib-devel port, which has a snapshot of clojure-contrib which works with [ticket:22717 clojure-devel]. -- Ticket URL: <http://trac.macports.org/ticket/22718> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #22717: Clojure-Devel
by MacPorts 01 Dec '09

01 Dec '09

#22717: Clojure-Devel --------------------------------+------------------------------------------- Reporter: ian.eure@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: --------------------------------+------------------------------------------- The attached Portfile adds the clojure-devel port, a snapshot of ongoing work on Clojure 1.1.0. -- Ticket URL: <http://trac.macports.org/ticket/22717> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4