February 2009 - macports-tickets - lists.macosforge.org

[MacPorts] #18277: p5-error .17015 Configure error
by MacPorts 17 Jan '10

17 Jan '10

#18277: p5-error .17015 Configure error ----------------------------------+----------------------------------------- Reporter: lancelakey@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.8.0 Keywords: p5-error | Port: p5-error ----------------------------------+----------------------------------------- Is the below error caused by the tcl command cd having been removed from trunk I read about on the wiki howto runningtrunk? ---> Fetching p5-error ---> Attempting to fetch Error-0.17015.tar.gz from ftp://ftp.cs.colorado.edu/pub/perl/CPAN/modules/by-module/Error ---> Attempting to fetch Error-0.17015.tar.gz from http://distfiles.macports.org/perl5 ---> Verifying checksum(s) for p5-error ---> Extracting p5-error ---> Configuring p5-error Error: Target org.macports.configure returned: configure failure: shell command " cd "/Users/asdf/.macports/var/macports/build/_Users_asdf_.macports_var_macports_sources_rsync.macports.org_release_ports_perl_p5-error/work/Error-0.17015" && /Users/asdf/.macports/bin/perl Makefile.PL INSTALLDIRS=vendor " returned error 127 Command output: sh: /Users/asdf/.macports/bin/perl: No such file or directory -- Ticket URL: <http://trac.macports.org/ticket/18277> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #18162: teTeX 3.0_6 fails to build
by MacPorts 16 Jan '10

16 Jan '10

#18162: teTeX 3.0_6 fails to build ----------------------------------+----------------------------------------- Reporter: horst@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: teTeX ----------------------------------+----------------------------------------- teTeX 3.0_6 cannot be built on my OS X 10.4.11 (Xcode 2.5) installation. Please ask for details if you need more. {{{ # port outdated The following installed ports are outdated: teTeX 3.0_5 < 3.0_6 # port upgrade teTeX ---> Fetching teTeX ---> Verifying checksum(s) for teTeX ---> Extracting teTeX ---> Configuring teTeX ---> Building teTeX Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_teTeX/work /tetex-src-3.0" && make all " returned error 2 Command output: /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I./.. -W -Wall -Wunused -I../../libs/t1lib -I./../../libs/t1lib -I../../libs/t1lib/../type1 -I./../../libs/t1lib/../type1 -DPS_GS -I./gui -I../../libs/t1lib/lib/t1lib -I../kpathsea -I/usr/X11R6/include -I/opt/local/include -O2 -c util.c -o util.o /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I./.. -W -Wall -Wunused -I../../libs/t1lib -I./../../libs/t1lib -I../../libs/t1lib/../type1 -I./../../libs/t1lib/../type1 -DPS_GS -I./gui -I../../libs/t1lib/lib/t1lib -I../kpathsea -I/usr/X11R6/include -I/opt/local/include -O2 -c vf.c -o vf.o /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I./.. -W -Wall -Wunused -I../../libs/t1lib -I./../../libs/t1lib -I../../libs/t1lib/../type1 -I./../../libs/t1lib/../type1 -DPS_GS -I./gui -I../../libs/t1lib/lib/t1lib -I../kpathsea -I/usr/X11R6/include -I/opt/local/include -O2 -c xdvi.c -o xdvi.o /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I./.. -W -Wall -Wunused -I../../libs/t1lib -I./../../libs/t1lib -I../../libs/t1lib/../type1 -I./../../libs/t1lib/../type1 -DPS_GS -I./gui -I../../libs/t1lib/lib/t1lib -I../kpathsea -I/usr/X11R6/include -I/opt/local/include -O2 -c xserver-info.c -o xserver-info.o /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I./.. -W -Wall -Wunused -I../../libs/t1lib -I./../../libs/t1lib -I../../libs/t1lib/../type1 -I./../../libs/t1lib/../type1 -DPS_GS -I./gui -I../../libs/t1lib/lib/t1lib -I../kpathsea -I/usr/X11R6/include -I/opt/local/include -O2 -c x_util.c -o x_util.o /bin/sh ../libtool --mode=link /usr/bin/gcc-4.0 -o xdvi-motif.bin -L/opt/local/lib browser.o dvi-draw.o dvi-init.o dvisel.o encodings.o events.o filehist.o font-open.o gf.o hypertex.o image-magick.o mime.o my- snprintf.o my-vsnprintf.o pagehist.o pk.o print-internal.o psdps.o psgs.o psheader.o psnews.o read-mapfile.o search-internal.o special.o string- utils.o tfmload.o util.o vf.o xdvi.o xserver-info.o x_util.o ./gui/libgui.a ../../libs/t1lib/libt1.a ../../libs/t1lib/../type1/libtype1.a -L/usr/X11R6/lib -lXm -lXmu -lXt -lSM -lICE -lXp -lXext -lX11 -liconv -lXpm ../kpathsea/libkpathsea.la -lm mkdir .libs /usr/bin/gcc-4.0 -o xdvi-motif.bin browser.o dvi-draw.o dvi-init.o dvisel.o encodings.o events.o filehist.o font-open.o gf.o hypertex.o image-magick.o mime.o my-snprintf.o my-vsnprintf.o pagehist.o pk.o print- internal.o psdps.o psgs.o psheader.o psnews.o read-mapfile.o search- internal.o special.o string-utils.o tfmload.o util.o vf.o xdvi.o xserver- info.o x_util.o -L/opt/local/lib ./gui/libgui.a ../../libs/t1lib/libt1.a ../../libs/t1lib/../type1/libtype1.a -L/usr/X11R6/lib -lXm -lXft -lXrender -lfontconfig -lexpat -lfreetype -ljpeg -lpng -lz -lXmu -lXt -lSM -lICE -lXp -lXext -lXpm -lX11 -lXau -lXdmcp -lintl -liconv -lc ../kpathsea/.libs/libkpathsea.a -lm /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning multiple definitions of symbol _XtRemoveTimeOut events.o definition of _XtRemoveTimeOut in section (__TEXT,__text) /opt/local/lib/libXt.dylib(NextEvent.o) definition of _XtRemoveTimeOut /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning multiple definitions of symbol _XtAddTimeOut events.o definition of _XtAddTimeOut in section (__TEXT,__text) /opt/local/lib/libXt.dylib(NextEvent.o) definition of _XtAddTimeOut /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning multiple definitions of symbol _XtAppAddTimeOut events.o definition of _XtAppAddTimeOut in section (__TEXT,__text) /opt/local/lib/libXt.dylib(NextEvent.o) definition of _XtAppAddTimeOut /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: multiple definitions of symbol _hash_create /usr/lib/gcc/i686-apple-darwin8/4.0.1/../../../libc.dylib(strhash.So) definition of _hash_create ../kpathsea/.libs/libkpathsea.a(hash.o) definition of _hash_create in section (__TEXT,__text) /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning multiple definitions of symbol _vendorShellWidgetClass /opt/local/lib/libXm.dylib(VendorS.o) definition of _vendorShellWidgetClass /opt/local/lib/libXt.dylib(Vendor.o) definition of _vendorShellWidgetClass /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning multiple definitions of symbol _vendorShellClassRec /opt/local/lib/libXm.dylib(VendorS.o) definition of _vendorShellClassRec /opt/local/lib/libXt.dylib(Vendor.o) definition of _vendorShellClassRec collect2: ld returned 1 exit status make[2]: *** [xdvi-motif.bin] Error 1 make[1]: *** [all] Error 1 make: *** [all] Error 1 Error: Unable to upgrade port: 1 }}} -- Ticket URL: <http://trac.macports.org/ticket/18162> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #15971: MacFUSE does not work with GNU coreutils
by MacPorts 14 Jan '10

14 Jan '10

#15971: MacFUSE does not work with GNU coreutils -----------------------------------+---------------------------------------- Reporter: jason.dusek(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -----------------------------------+---------------------------------------- If I mount a MacFUSE filesystem on a directory, it disappears from the point of view of the coreutils, and also `/opt/local/bin/vim` and other ports. If this is not a bug and I just messed something up, I'd love to be let in on the secret. -- Ticket URL: <http://trac.macports.org/ticket/15971> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #16733: Tidy Update Request
by MacPorts 13 Jan '10

13 Jan '10

#16733: Tidy Update Request ------------------------------------+--------------------------------------- Reporter: william.dinoia(a)mac.com | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: tidy update request | Port: tidy ------------------------------------+--------------------------------------- Requesting the tidy port be updated to a more current version. -- Ticket URL: <http://trac.macports.org/ticket/16733> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #17713: port quiet mode isn't quiet enough
by MacPorts 13 Jan '10

13 Jan '10

#17713: port quiet mode isn't quiet enough ----------------------------------+----------------------------------------- Reporter: ludwig@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: MacPorts 1.7.1 Component: base | Version: 1.7.0 Keywords: port quiet | Port: ----------------------------------+----------------------------------------- {{{ $ port -q outdated No installed ports are outdated. }}} The quiet flag ought to suppress nonessential output such as the above. (As is, a cron job to check for outdated ports fires off an unnecessary email due to the command producing output.) -- Ticket URL: <http://trac.macports.org/ticket/17713> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #16525: ufraw dcraw file conflict
by MacPorts 08 Jan '10

08 Jan '10

#16525: ufraw dcraw file conflict --------------------------------+------------------------------------------- Reporter: dersh(a)alum.mit.edu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ufraw dcraw --------------------------------+------------------------------------------- There is a naming conflict between ufraw and dcraw. The problem is that ufraw installs a file called /opt/local/bin/dcraw while, if I try to install dcraw, it attempts to install the same file, and fails. I am not sure if these are the same version of dcraw or not. But perhaps the best solution, since both ports exist, is to have ufraw depend on dcraw, instead of including its own version of the same code (unless one is a different version, or is patched or something?) The above naming can cause a problem if other ports, such as qtpfsgui, come to depend on dcraw. -- Ticket URL: <http://trac.macports.org/ticket/16525> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #17861: RFE: Remove +ipv6 and make it default
by MacPorts 08 Jan '10

08 Jan '10

#17861: RFE: Remove +ipv6 and make it default ---------------------------------+------------------------------------------ Reporter: raimue@… | Owner: raimue@… Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Keywords: ipv6 | Port: bro, claws-mail, curl, djbdns, epic5, ethereal, fping, gauche, hfsrsync, imap-uw, net-snmp, oftpd, openldap, qt3-mac, sylpheed, sylpheed-devel, tin, tin-devel, tin-recent, wireshark, xchat2 ---------------------------------+------------------------------------------ Some ports still have a +ipv6 variant. Most of them only pass --disable- ipv6/--enable-ipv6 to the configure script and do not add additional dependencies. As many other ports already provide support for IPv6 by default, I would like to remove +ipv6 altogether and support IPv6 by default also for these ports. Affected ports: || bro || pmq(a)macports.org || || claws-mail || nomaintainer(a)macports.org || || curl || ryandesign(a)macports.org || || djbdns || nomaintainer(a)macports.org || || epic5 || nomaintainer(a)macports.org || || ethereal || opendarwin.org(a)darkart.com || || fping || nomaintainer(a)macports.org || || gauche || akitada@macports.org,openmaintainer@macports.org || || hfsrsync || nomaintainer(a)macports.org || || imap-uw || nomaintainer(a)macports.org || || net-snmp || opendarwin.org@darkart.com,openmaintainer@macports.org || || oftpd || nomaintainer(a)macports.org || || openldap || landonf(a)macports.org || || qt3-mac || blair(a)macports.org || || sylpheed || nomaintainer(a)macports.org || || sylpheed-devel || nomaintainer(a)macports.org || || tin || nomaintainer(a)macports.org || || tin-devel || nomaintainer(a)macports.org || || tin-recent || vincent-opdarw(a)vinc17.org || || wireshark || opendarwin.org(a)darkart.com || || xchat2 || afb@macports.org,openmaintainer@macports.org || Please give feedback. I will go ahead and change nomaintainer/openmaintainer in a few days. -- Ticket URL: <http://trac.macports.org/ticket/17861> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #18200: R fails to build
by MacPorts 08 Jan '10

08 Jan '10

#18200: R fails to build --------------------------------+------------------------------------------- Reporter: andilipa@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: R --------------------------------+------------------------------------------- I was trying to install R, and the installation exits with the following error message. --- /bin/sh: line 1: gtkdoc-rebase: command not found make[5]: *** [install-data-local] Error 127 make[4]: *** [install-am] Error 2 make[3]: *** [install-recursive] Error 1 make[2]: *** [install-recursive] Error 1 make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 Error: Target org.macports.destroot returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_glib2/work/glib-2.18.3" && make install DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_glib2/work/destroot " returned error 2 Command output: -- Installing ./html/glib.html -- Installing ./html/gtester-report.html -- Installing ./html/gtester.html -- Installing ./html/home.png -- Installing ./html/index.html -- Installing ./html/index.sgml -- Installing ./html/ix01.html -- Installing ./html/ix02.html -- Installing ./html/ix03.html -- Installing ./html/ix04.html -- Installing ./html/ix05.html -- Installing ./html/ix06.html -- Installing ./html/ix07.html -- Installing ./html/ix08.html -- Installing ./html/ix09.html -- Installing ./html/ix10.html -- Installing ./html/ix11.html -- Installing ./html/left.png -- Installing ./html/mainloop-states.gif -- Installing ./html/right.png -- Installing ./html/style.css -- Installing ./html/tools.html -- Installing ./html/up.png /bin/sh: line 1: gtkdoc-rebase: command not found make[5]: *** [install-data-local] Error 127 make[4]: *** [install-am] Error 2 make[3]: *** [install-recursive] Error 1 make[2]: *** [install-recursive] Error 1 make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 Warning: the following items did not execute (for glib2): org.macports.activate org.macports.destroot org.macports.install --- The Mac OS is 10.4.11 -- Ticket URL: <http://trac.macports.org/ticket/18200> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #17357: cyrus-sasl2 needs a change in order to build the universal variant
by MacPorts 05 Jan '10

05 Jan '10

#17357: cyrus-sasl2 needs a change in order to build the universal variant -----------------------------------+---------------------------------------- Reporter: 10.50@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: cyrus-sasl2 universal | Port: cyrus-sasl2 -----------------------------------+---------------------------------------- The ''cyrus-sasl2'' package, needed by subversion, must be minutly modified in order to build +universal. The "libtool" file bundled with the package does not link universal lib. At line 178 of the script, instead of this: {{{ archive_cmds = "$(CC) ..." }}} it should be: {{{ archive_cmds = "$(CC) -arch i386 -arch ... (etc. depending on the archs that should be built) ..." }}} With that patch everything goes fine. -- Ticket URL: <http://trac.macports.org/ticket/17357> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 12

[MacPorts] #18061: RFU: livecheck reports that cclient is out of date
by MacPorts 05 Jan '10

05 Jan '10

#18061: RFU: livecheck reports that cclient is out of date -----------------------------------+---------------------------------------- Reporter: mcalhoun@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Keywords: | Port: cclient -----------------------------------+---------------------------------------- livecheck reports: {{{ cclient seems to have been updated (port version: 2007d, new version: 2007e) }}} -- Ticket URL: <http://trac.macports.org/ticket/18061> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2