April 2009 - macports-tickets - lists.macosforge.org

[MacPorts] #18894: Internal libboost dependency failure at reference time.
by MacPorts 02 Nov '10

02 Nov '10

#18894: Internal libboost dependency failure at reference time. --------------------------------+------------------------------------------- Reporter: trog24@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: --------------------------------+------------------------------------------- The following error occurs when trying to link openvrml to libboost: g++ -D_THREAD_SAFE -g -O2 -o .libs/browser browser.o -Wl,-bind_at_load -L/opt/local/lib ./.libs/libtest-openvrml.a /Users/frank/FirefoxDownloads/openvrml-0.17.12/src/libopenvrml/.libs/libopenvrml.dylib -L/opt/local/lib/firefox-2.0.0.20 /opt/local/lib/libjpeg.dylib /opt/local/lib/libpng12.dylib /opt/local/lib/libfontconfig.dylib /opt/local/lib/libiconv.dylib /opt/local/lib/libexpat.dylib /opt/local/lib/libfreetype.dylib -lz -lmozjs -lplds4 -lplc4 -lnspr4 -lboost_thread-mt -lboost_unit_test_framework-mt -lboost_filesystem-mt /usr/bin/ld: Undefined symbols: boost::system::get_system_category() boost::system::get_generic_category() collect2: ld returned 1 exit status make[2]: *** [browser] Error 1 make[2]: Leaving directory `/Users/frank/FirefoxDownloads/openvrml-0.17.12/tests' make[1]: *** [check-am] Error 2 make[1]: Leaving directory `/Users/frank/FirefoxDownloads/openvrml-0.17.12/tests' The undefined symbol references get_system_category() and get_generic_category() are in libboost_filesystem-mt and the symbols are defined in libboost_system-mt and not in some unrelated library; yet, libboost_filesystem-mt cannot find libboost_system-mt to resolve the undefines, a library libboost_filesystem-mt is dependent on even though the libboost_system-mt is part of the same set without a supplied reference, ie: make check LDFLAGS='-lboost_system-mt' This particular dependency should have been resolved during the Boost build process. The above command is the work around until the problem is resolved. -- Ticket URL: <http://trac.macports.org/ticket/18894> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 20

[MacPorts] #19387: py26-virtualenvwrapper 1.12 uses py25-virtualenv instead of py26-virtualenv
by MacPorts 01 Nov '10

01 Nov '10

#19387: py26-virtualenvwrapper 1.12 uses py25-virtualenv instead of py26-virtualenv --------------------------------------------------------+------------------- Reporter: brainsik+macports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.1 Keywords: virtualenvwrapper virtualenv virtualenv2.6 | Port: py26-virtualenvwrapper --------------------------------------------------------+------------------- The py25-virtualenv port installs the virtualenv command as "virtualenv". The py26-virtualenv port installs the virtualenv command as "virtualenv2.6". The py26-virtualenvwrapper port uses a virtualenvwrapper script that calls "virtualenv" instead of "virtualenv2.6" to create new virtualenvs. That causes those virtualenvs to incorrectly use Python 2.5 instead of 2.6. -- Ticket URL: <http://trac.macports.org/ticket/19387> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #19343: openssl: man page names conflict with system man page names
by MacPorts 01 Nov '10

01 Nov '10

#19343: openssl: man page names conflict with system man page names ------------------------------------+--------------------------------------- Reporter: aetherknight@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.1 Keywords: openssl man | Port: openssl ------------------------------------+--------------------------------------- The openssl package installs several man pages in man section 1 whose names overlap with various standard Mac OS X commands, such as passwd. This causes commands such as {{{man passwd}}} to display the man page for {{{openssl passwd}}} instead of the {{{passwd}}} user account password changing utility, if man has been configured to search in /opt/local/share/man before searching in the normal man locations. Some Linux distributions deal with this by renaming the openssl man section 1 pages to ssl-name or openssl-name, such as [http://sources.gentoo.org/viewcvs.py/gentoo-x86/dev- libs/openssl/openssl-0.9.8k.ebuild?view=markup Gentoo]. (look in the src_install() method). Could MacPorts' openssl port do something similar? -- Ticket URL: <http://trac.macports.org/ticket/19343> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #17841: sshfs errors on from_code,to_code
by MacPorts 01 Nov '10

01 Nov '10

#17841: sshfs errors on from_code,to_code -------------------------------------+-------------------------------------- Reporter: silverdemon@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: -------------------------------------+-------------------------------------- sshfs user@host.com:/ /mnt/ -omodules=iconv,from_code=UTF-8,to_code=CP1251 dyld: lazy symbol binding failed: Symbol not found: _iconv_open Referenced from: /opt/local/lib/libfuse.0.dylib Expected in: flat namespace dyld: Symbol not found: _iconv_open Referenced from: /opt/local/lib/libfuse.0.dylib Expected in: flat namespace Trace/BPT trap -- Ticket URL: <http://trac.macports.org/ticket/17841> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #16892: fuse-bindings-python25 0.2 import fails: _iconv not found
by MacPorts 01 Nov '10

01 Nov '10

#16892: fuse-bindings-python25 0.2 import fails: _iconv not found --------------------------------+------------------------------------------- Reporter: kentk(a)mac.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: fuse macfuse iconv | Port: fuse-bindings-python25 --------------------------------+------------------------------------------- After a clean install of macfuse 1.7 and fuse-bindings-python25 0.2, I get this: {{{ Python 2.5.2 (r252:60911, Jul 8 2008, 16:31:55) [GCC 4.0.1 (Apple Inc. build 5484)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import fuse Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/opt/local/lib/python2.5/site-packages/fuse.py", line 26, in <module> from fuseparts._fuse import main, FuseGetContext, FuseInvalidate ImportError: dlopen(/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5 /site-packages/fuseparts/_fusemodule.so, 2): Symbol not found: _iconv Referenced from: /opt/local/lib/libfuse.2.dylib Expected in: flat namespace }}} Linked libraries: {{{ kkarlsson:~ kkarlsson$ otool -L /opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5 /site-packages/fuseparts/_fusemodule.so /opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5 /site-packages/fuseparts/_fusemodule.so: /opt/local/lib/libfuse.2.dylib (compatibility version 10.0.0, current version 10.7.3) /opt/local/lib/libiconv.2.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.1.1) }}} Symbols in libiconv: {{{ kkarlsson:~ kkarlsson$ nm /opt/local/lib/libiconv.2.dylib | grep iconv /opt/local/lib/libiconv.2.dylib(single module): 000f8020 D __libiconv_version 000187c0 T _iconv_canonicalize 00016590 T _libiconv 000165f0 T _libiconv_close 00017fa0 T _libiconv_open 00019040 t _libiconv_relocate 00018f50 T _libiconv_set_relocation_prefix 00016610 T _libiconvctl 00016850 T _libiconvlist }}} The symbol is not something found in libiconv, and I'm not sure where the reference even comes from, because fusemodule.c doesn't ever call anything iconv* -- Ticket URL: <http://trac.macports.org/ticket/16892> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 10

[MacPorts] #19375: Elixir for Python 2.6
by MacPorts 01 Nov '10

01 Nov '10

#19375: Elixir for Python 2.6 --------------------------------+------------------------------------------- Reporter: mviamari@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.7.1 Keywords: | Port: --------------------------------+------------------------------------------- I'd like to see a port for Elixir with support for Python 2.6 added. Thanks. -- Ticket URL: <http://trac.macports.org/ticket/19375> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #19344: proftpd - no support for tls
by MacPorts 01 Nov '10

01 Nov '10

#19344: proftpd - no support for tls ----------------------------------+----------------------------------------- Reporter: guillaume@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.1 Keywords: | Port: proftpd ----------------------------------+----------------------------------------- It'd be awesome if the proftpd port had a tls variant out of the box. The tls module is included with proftpd source code, and it only depends on openssl ! Currently, I have to edit proftpd's portfile everytime it's updated to add the following tls variant. {{{ variant tls { depends_lib-append port:openssl configure.args-append --with-modules=mod_tls } }}} -- Ticket URL: <http://trac.macports.org/ticket/19344> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #19312: gdk_pixbuf dependencies
by MacPorts 01 Nov '10

01 Nov '10

#19312: gdk_pixbuf dependencies ---------------------------------------------+------------------------------ Reporter: pierreetienne.meunier@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.1 Keywords: | Port: ---------------------------------------------+------------------------------ add libranlib to the dependencies of gdk_pixbuf. It does not build else (patch file to Portfile joined) -- Ticket URL: <http://trac.macports.org/ticket/19312> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #19295: libgnomeui: fails to compile with "/opt/local/bin/gsed: can't read /opt/local/lib/libgtk-x11-2.0.la: No such file or directory"
by MacPorts 31 Oct '10

31 Oct '10

#19295: libgnomeui: fails to compile with "/opt/local/bin/gsed: can't read /opt/local/lib/libgtk-x11-2.0.la: No such file or directory" -----------------------------------+---------------------------------------- Reporter: Damien@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.1 Keywords: compile, x11, libgtk | Port: libgnomeui -----------------------------------+---------------------------------------- I cannot libgnomeui, because of some problem with GTK. {{{ $ port installed gtk2 The following ports are currently installed: gtk2 @2.14.7_2+no_x11+quartz (active) $ port info libgnomeui libgnomeui @2.24.1 (gnome) Variants: (+)no_x11, universal … $ port -d install libgnomeui +no_x11 … make[5]: Nothing to be done for `all-am'. /bin/sh ../libtool --tag=CC --mode=link /usr/bin/gcc-4.0 -pipe -O2 -version-info 2400:1:2400 -no-undefined -export-symbols-regex "^[^_].*" -L/opt/local/lib -o libgnomeui-2.la -rpath /opt/local/lib libgnomeui- access.lo gnometypebuiltins.lo gnome-about.lo gnome-app.lo gnome-app- helper.lo gnome-app-util.lo gnome-appbar.lo gnome-stock-icons.lo gnome- client.lo gnome-color-picker.lo gnome-dateedit.lo gnome-dialog.lo gnome- dialog-util.lo gnome-druid.lo gnome-druid-page.lo gnome-druid-page-edge.lo gnome-druid-page-standard.lo gnome-entry.lo gnome-file-entry.lo gnome- font-picker.lo gnome-gconf-ui.lo gnome-href.lo gnome-ice.lo gnome-marshal- main.lo gnome-messagebox.lo gnome-mdi.lo gnome-mdi-child.lo gnome-mdi- generic-child.lo gnome-mdi-session.lo gnome-multiscreen.lo gnome-pixmap.lo gnome-pixmap-entry.lo gnome-popup-menu.lo gnome-propertybox.lo gnome- scores.lo gnome-theme-parser.lo gnome-thumbnail.lo gnome-thumbnail-pixbuf- utils.lo gnome-ui-init.lo gnometypes.lo gnome-icon-entry.lo gnome-icon- item.lo gnome-icon-list.lo gnome-icon-lookup.lo gnome-icon-sel.lo gnome- icon-theme.lo gnome-vfs-util.lo gnome-window.lo gnome-window-icon.lo gnome-password-dialog.lo gnome-authentication-manager.lo -Wl,-framework,CoreAudio -L/opt/local/lib -lbonoboui-2 -lxml2 -lpthread -lgnomecanvas-2 -lgnome-2 -lpopt -lgailutil -lart_lgpl_2 -lgtk-quartz-2.0 -lgdk-quartz-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lcairo -lpangoft2-1.0 -lpixman-1 -lfontconfig -lexpat -lfreetype -lpng12 -lz -lesd -lbonobo-2 -laudiofile -lbonobo-activation -lpango-1.0 -lgio-2.0 -lgnomevfs-2 -lgconf-2 -lORBit-2 -lm -ldbus-1 -lgmodule-2.0 -lgthread-2.0 -lgobject-2.0 -lgnome-keyring -lglib-2.0 -lintl -liconv -lpopt grep: /opt/local/lib/libgtk-x11-2.0.la: No such file or directory /opt/local/bin/gsed: can't read /opt/local/lib/libgtk-x11-2.0.la: No such file or directory libtool: link: `/opt/local/lib/libgtk-x11-2.0.la' is not a valid libtool archive make[4]: *** [libgnomeui-2.la] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 }}} -- Ticket URL: <http://trac.macports.org/ticket/19295> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #19292: faad2: reinplace didn't change anything in aclocal.m4
by MacPorts 31 Oct '10

31 Oct '10

#19292: faad2: reinplace didn't change anything in aclocal.m4 -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: pguyot@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.1 Keywords: | Port: faad2 -------------------------------------+-------------------------------------- On Mac OS X 10.5.6 Intel with Xcode 3.1.2 and MacPorts 1.7.1 and the patch from #15514 I get: {{{ ---> Fetching faad2 ---> Verifying checksum(s) for faad2 ---> Extracting faad2 ---> Applying patches to faad2 ---> Configuring faad2 Warning: reinplace s|-flat_namespace -undefined suppress|-undefined error|g didn't change anything in /mp/var/macports/build/_Users_rschmidt_macports_dports_audio_faad2/work/faad2/aclocal.m4 ---> Building faad2 ---> Staging faad2 into destroot ---> Installing faad2 @2.6.1_1 ---> Activating faad2 @2.6.1_1 ---> Cleaning faad2 }}} Maybe the reinplace needs to be changed, or maybe it's no longer needed, or maybe it only applies on certain systems. -- Ticket URL: <http://trac.macports.org/ticket/19292> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1