June 2009 - macports-tickets - lists.macosforge.org

[MacPorts] #20076: boost @1.39.0_2 +python25 - Activation fails
by MacPorts 25 Jun '09

25 Jun '09

#20076: boost @1.39.0_2 +python25 - Activation fails -----------------------------------------------+---------------------------- Reporter: hugo.strand@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: boost python2.5 python activation | Port: boost -----------------------------------------------+---------------------------- Port activation fails when trying to install Boost (1.39) with Python2.5 support. Running: {{{ sudo port -d install boost +debug +doc +graphml +icu +openmpi +python25 }}} The building and installation works out fine but the activation stage does not complete. All the include and library files are successfully "activated" but when {{{port}}} gets to the "boost python module" I get the error message: {{{ ... DEBUG: Adding file to file_map: /opt/local/Library/Frameworks /Python.framework/Versions/2.5/lib/python2.5/site- packages/boost/__init__.py for: boost DEBUG: Not a directory while executing "filemap set file_map $file $port" (procedure "receipt_flat::register_file" line 11) invoked from within "${macports::registry.format}::register_file $file $port" (procedure "registry::register_file" line 3) invoked from within "registry::register_file $file $name" (procedure "portimage::activate" line 65) invoked from within "portimage::activate $portname [composite_version $portversion [array get variations]] [array get options]" Error: port activate failed: Not a directory }}} But when looking at the boost installation, {{{ports}}} report it as activated. {{{ bash-3.2$ port installed boost The following ports are currently installed: boost @1.39.0_2+debug+doc+graphml+icu+openmpi+python25 (active) }}} ---- What am I doing wrong here? Is there a problem with my Python installation or is this caused by the boost {{{Portfile}}}? ---- Further: Trying to runt {{{port deactivate}}}, {{{uninstall}}} and {{{clean --all}}} on {{{boost}}} does not remove the files added by the {{{port}}} activation. Thus when trying to install boost a second time ports activation stage complain on already existing files not belonging to any port. {{{ ---> Activating boost Error: port activate failed: Image error: /opt/local/include/boost/accumulators/accumulators.hpp already exists and does not belong to a registered port. Unable to activate port boost. }}} Removing the old files manually i.e., {{{ rm -r /opt/local/include/boost/ rm -r /opt/loca/lib/libboost_* rm -r /opt/local/share/doc/boost-1_39/ }}} (or using {{{port activate -f boost}}} that renames all old files to {{{*.mp_*}}}.) This makes it possible to run the activation but as expected it also fails at the same point as above. -- Ticket URL: <http://trac.macports.org/ticket/20076> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #19558: py25-shogun - 0.6 - deprecated, should be moved to shogun
by MacPorts 25 Jun '09

25 Jun '09

#19558: py25-shogun - 0.6 - deprecated, should be moved to shogun --------------------------------+------------------------------------------- Reporter: jameskyle@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: --------------------------------+------------------------------------------- I am submitting a new port called shogun. Due to changes in the shogun build process, I am now able to specify multiple interfaces in one build. Thus, a single port with interface variants is more appropriate. e.g. {{{ port install shogun +python +octave +r }}} Please see ticket #18557 for the new portfile for pymvpa. The pymvpa port should be concurrently updated as it has a variant for the py25-shogun (now shogun) port. -- Ticket URL: <http://trac.macports.org/ticket/19558> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #20067: Installing curl-7.19.5 causes checksum error
by MacPorts 25 Jun '09

25 Jun '09

#20067: Installing curl-7.19.5 causes checksum error ---------------------------------+------------------------------------------ Reporter: stronk7@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: curl ---------------------------------+------------------------------------------ Trying to install curl (or anything depending on it I get, with debug enabled): {{{ DEBUG: Executing org.macports.main (curl) ---> Fetching curl DEBUG: Executing org.macports.fetch (curl) ---> Verifying checksum(s) for curl DEBUG: Executing org.macports.checksum (curl) ---> Checksumming curl-7.19.5.tar.bz2 Error: Checksum (md5) mismatch for curl-7.19.5.tar.bz2 Portfile checksum: curl-7.19.5.tar.bz2 md5 426d161661dce70c8ea9ad8f553363a3 Distfile checksum: curl-7.19.5.tar.bz2 md5 8cee0a8207de091c245be5d78da8d02e Error: Checksum (sha1) mismatch for curl-7.19.5.tar.bz2 Portfile checksum: curl-7.19.5.tar.bz2 sha1 e9256f93f5a8c7f40a3c8696c2841a6c5c2b1bf7 Distfile checksum: curl-7.19.5.tar.bz2 sha1 e02d1fbf2e3b1279bd1bcd19ef9a952d3c7f03e9 Error: Checksum (rmd160) mismatch for curl-7.19.5.tar.bz2 Portfile checksum: curl-7.19.5.tar.bz2 rmd160 a6c1ca2962c2372ede310a508f36a06205eb8fb0 Distfile checksum: curl-7.19.5.tar.bz2 rmd160 825006e7832f9fb93909da938961a2d30aebf825 The correct checksum line may be: checksums md5 8cee0a8207de091c245be5d78da8d02e \ sha1 e02d1fbf2e3b1279bd1bcd19ef9a952d3c7f03e9 \ rmd160 825006e7832f9fb93909da938961a2d30aebf825 Error: Target org.macports.checksum returned: Unable to verify file checksums }}} -- Ticket URL: <http://trac.macports.org/ticket/20067> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #20059: new port: centerim-devel
by MacPorts 25 Jun '09

25 Jun '09

#20059: new port: centerim-devel -------------------------------+-------------------------------------------- Reporter: nefar@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: -------------------------------+-------------------------------------------- development version for centerim. includes yahoo authentication fix. -- Ticket URL: <http://trac.macports.org/ticket/20059> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #20057: build boost with python25 variant
by MacPorts 24 Jun '09

24 Jun '09

#20057: build boost with python25 variant -------------------------------------+-------------------------------------- Reporter: pierrefalek@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: -------------------------------------+-------------------------------------- Hi. I'm trying to install Deluge. I have installed Deluge with Porticus which is much more clearer than the Terminal interface. Python25 version 2.5.4_6 is well installed in the ports (Porticus interface is telling me that in the installed ports menu) but when I try a sudo port install deluge I goes : Configuring deluge Error: You must build boost with the python25 variant Error: Target org.macports.configure returned: You must build boost with the python25 variant Error: Status 1 encountered during processing. Executing: /opt/local/bin/port install deluge What Shall I do ? -- Ticket URL: <http://trac.macports.org/ticket/20057> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #20036: Port Submission: worker
by MacPorts 24 Jun '09

24 Jun '09

#20036: Port Submission: worker -------------------------------------+-------------------------------------- Reporter: macports@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: X11 | Port: worker -------------------------------------+-------------------------------------- I made a Portfile for worker, please consider to add it to the main ports repository. Worker is a two panel file manager for X. -- Ticket URL: <http://trac.macports.org/ticket/20036> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #19843: gst-plugins-base-0.10.23 build fail - OS X 10.5.4
by MacPorts 24 Jun '09

24 Jun '09

#19843: gst-plugins-base-0.10.23 build fail - OS X 10.5.4 ----------------------------+----------------------------------------------- Reporter: leho@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: ----------------------------+----------------------------------------------- {{{ ---> Fetching gst-plugins-base ---> Attempting to fetch gst-plugins-base-0.10.23.tar.bz2 from ftp://ftp.no.gnome.org/pub/GNOME/sources/gst-plugins-base/0.10/ ---> Verifying checksum(s) for gst-plugins-base ---> Extracting gst-plugins-base ---> Configuring gst-plugins-base ---> Building gst-plugins-base Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_gnome_gst-plugins-base/work/gst-plugins-base-0.10.23" && make all " returned error 2 Command output: CC vs_4tap.o LINK libgstvideoscale.la Making all in volume CC gstvolume.o LINK libgstvolume.la Making all in sys Making all in ximage CC ximagesink.o CC ximage.o LINK libgstximagesink.la Making all in xvimage CC xvimagesink.o LINK libgstxvimagesink.la Making all in ext Making all in cdparanoia CC gstcdparanoiasrc.o /opt/local/include/cdda_interface.h:175: warning: 'strerror_tr' defined but not used LINK libgstcdparanoia.la Undefined symbols: "_cdda_identify_scsi", referenced from: _gst_cd_paranoia_src_open in libgstcdparanoia_la-gstcdparanoiasrc.o "_cdda_identify", referenced from: _gst_cd_paranoia_src_open in libgstcdparanoia_la-gstcdparanoiasrc.o _gst_cd_paranoia_src_open in libgstcdparanoia_la-gstcdparanoiasrc.o ld: symbol(s) not found collect2: ld returned 1 exit status make[3]: *** [libgstcdparanoia.la] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. }}} googling "_gst_cd_paranoia_src_open" gives me nothing. reinstalling cdparanoia did not help. -- Ticket URL: <http://trac.macports.org/ticket/19843> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 11

[MacPorts] #20052: ttcp-1.10_0 port version correction
by MacPorts 24 Jun '09

24 Jun '09

#20052: ttcp-1.10_0 port version correction ---------------------------------+------------------------------------------ Reporter: bsdcrank@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Low | Milestone: Component: ports | Version: 1.7.1 Keywords: ttcp | Port: ttcp-1.10_0 ---------------------------------+------------------------------------------ ttcp.c is revision 1.12 port version should be updated accordingly. -- Ticket URL: <http://trac.macports.org/ticket/20052> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #19505: php5-rrdtool: move to php category and use php5extension portgroup
by MacPorts 24 Jun '09

24 Jun '09

#19505: php5-rrdtool: move to php category and use php5extension portgroup -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: markd@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: php5-rrdtool -------------------------------------+-------------------------------------- I'd like to move php5-rrdtool to the newly-created php top-level category, and switch it to using the new php5extension portgroup. Attached is a patch to do the latter. The revision is increased because the portgroup causes an .ini file to get installed. I also believe the category www can probably be deleted, because rrdtool has nothing specifically to do with the web, right? -- Ticket URL: <http://trac.macports.org/ticket/19505> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #18843: graphviz 2.22.2 +php does not build, Error: Unable to find 'php.swg'
by MacPorts 24 Jun '09

24 Jun '09

#18843: graphviz 2.22.2 +php does not build, Error: Unable to find 'php.swg' ----------------------------------+----------------------------------------- Reporter: calle.kabo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: graphviz php | Port: graphviz ----------------------------------+----------------------------------------- Hi, I'm unable to build graphviz 2.22.2 +php The error is: {{{ swig -c++ -php5 -o gv_php.cpp ./gv.i :3: Error: Unable to find 'php.swg' }}} -- Ticket URL: <http://trac.macports.org/ticket/18843> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3