June 2009 - macports-tickets - lists.macosforge.org

[MacPorts] #18315: 1.7.0 install hangs on Leopard 10.5.6
by MacPorts 09 Aug '09

09 Aug '09

#18315: 1.7.0 install hangs on Leopard 10.5.6 -------------------------------------+-------------------------------------- Reporter: velociraptor@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: base | Version: 1.7.0 Keywords: postflight, shell error | Port: -------------------------------------+-------------------------------------- Using the GUI package installer hangs @ about 2/3 of the progress bar and does not complete. I was forced to use "force quit" or kill from the terminal. Looking around in the shell, /opt/local/ and the other filesystem components were there, but the environment additions had not been added, so I assumed it was a problem with the postflight script and used the method mentioned in the "Hot Problems" page to run it. Postflight errored out and I had to manually edit the script to get it to complete. This is obviously related to defects #14809 and #16199, but I have found additional issues. a) shell is not recognized ("Unknown shell (sh)!") using: {{{ sudo /bin/bash <path to postflight_script>/postflight <options> }}} As an aside, looking in the process table, the original postflight script was being called with: {{{ sudo /bin/bash /Volumes/MacPorts-1.7.0/MacPorts-1.7.0.pkg/Contents/Resources/postflight /Volumes/MacPorts-1.7.0/MacPorts-1.7.0.pkg / / / }}} (that's three trailing slashes) b) postflight script errored out when trying to find dep_map_clean.tcl upgrade_sources_conf_default.tcl, due to $TCLSH and $PACKAGE_PATH variables not being set properly. I hard-coded in these for the appropriate path to get the postflight script to run after copying the package to a read/write location. Thanks. -- Ticket URL: <http://trac.macports.org/ticket/18315> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #15814: Verbose output not printed on Mac OS X 10.3.9 Panther
by MacPorts 09 Aug '09

09 Aug '09

#15814: Verbose output not printed on Mac OS X 10.3.9 Panther -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- MacPorts is not printing verbose output when requested on Mac OS X 10.3.9 Panther (on PowerPC of course). "`port -v install freetype`" proceeds as if "`-v`" had not been given. "`port -d install freetype`" prints the debug information, but still not the verbose information. It works fine on Mac OS X 10.4.11 and 10.5.3 (both on Intel). I am using trunk @37986. -- Ticket URL: <http://trac.macports.org/ticket/15814> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #15757: port distfiles shows name and URLs of new distfile but checksums of old distfile
by MacPorts 09 Aug '09

09 Aug '09

#15757: port distfiles shows name and URLs of new distfile but checksums of old distfile -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts base bugs Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- The ncid port is at version 0.70. "`port distfiles ncid`" says this: {{{ $ port distfiles ncid ---> Distfiles for ncid [ncid-0.70.tar.gz] md5: e179fbac6ab04ed3015fdf4e1c2a33f6 sha1: 287ebd8181f94be6a252edb10bf8b3593ac50d60 rmd160: 3da3269e9c8dd1da1c9ddf3b1e7be180230979a9 http://downloads.sourceforge.net/ncid/ncid-0.70.tar.gz [snip other download locations] }}} I edited the portfile and updated the version to 0.71. Now "`port distfiles ncid`" says this: {{{ $ port distfiles ncid Portfile changed since last build; discarding previous state. ---> Distfiles for ncid [ncid-0.71.tar.gz] md5: e179fbac6ab04ed3015fdf4e1c2a33f6 sha1: 287ebd8181f94be6a252edb10bf8b3593ac50d60 rmd160: 3da3269e9c8dd1da1c9ddf3b1e7be180230979a9 http://downloads.sourceforge.net/ncid/ncid-0.71.tar.gz [snip other download locations] }}} I see two problems: 1. It did not attempt to fetch ncid-0.71.tar.gz 2. Even if I "`port fetch ncid`" to get the new distfile, it is still showing the checksums of ncid-0.70.tar.gz; it should show the checksums of ncid-0.71.tar.gz Or do I misunderstand how "`port distfiles`" is meant to work? -- Ticket URL: <http://trac.macports.org/ticket/15757> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #19840: UPDATE: getmail 4.9.1
by MacPorts 08 Aug '09

08 Aug '09

#19840: UPDATE: getmail 4.9.1 ---------------------------------+------------------------------------------ Reporter: vinc17@… | Owner: mww Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: getmail ---------------------------------+------------------------------------------ getmail 4.9.1 is available. -- Ticket URL: <http://trac.macports.org/ticket/19840> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #19427: psutils build fails
by MacPorts 08 Aug '09

08 Aug '09

#19427: psutils build fails ---------------------------+------------------------------------------------ Reporter: Dave@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.1 Keywords: | Port: ---------------------------+------------------------------------------------ Z% sudo port install a2ps ---> Fetching psutils ---> Attempting to fetch psutils-p17.tar.gz from http://distfiles.macports.org/psutils ---> Verifying checksum(s) for psutils ---> Extracting psutils ---> Configuring psutils ---> Building psutils ---> Staging psutils into destroot Error: Target org.macports.destroot returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_psutils/work/psutils" && make install DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_psutils/work/destroot " returned error 2 Command output: gcc -DPAPER=\"a4\" -DUNIX -O -Wall -c -o psutil.o psutil.c gcc -DPAPER=\"a4\" -DUNIX -O -Wall -c -o pserror.o pserror.c gcc -o psbook psutil.o pserror.o psbook.o gcc -DPAPER=\"a4\" -DUNIX -O -Wall -c -o psselect.o psselect.c gcc -o psselect psutil.o pserror.o psselect.o gcc -DPAPER=\"a4\" -DUNIX -O -Wall -c -o pstops.o pstops.c gcc -DPAPER=\"a4\" -DUNIX -O -Wall -c -o psspec.o psspec.c gcc -o pstops psutil.o psspec.o pserror.o pstops.o gcc -DPAPER=\"a4\" -DUNIX -O -Wall -c -o epsffit.o epsffit.c gcc -o epsffit pserror.o epsffit.o gcc -DPAPER=\"a4\" -DUNIX -O -Wall -c -o psnup.o psnup.c gcc -o psnup psutil.o psspec.o pserror.o psnup.o gcc -DPAPER=\"a4\" -DUNIX -O -Wall -c -o psresize.o psresize.c gcc -o psresize psutil.o psspec.o pserror.o psresize.o mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_psutils/work/destroot/opt/local/bin mkdir: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_psutils/work/destroot/opt/local/bin: File exists make: [install.bin] Error 1 (ignored) Installing psbook install: psbook: No such file or directory Installing psselect install: psselect: No such file or directory Installing pstops install: pstops: No such file or directory Installing epsffit install: epsffit: No such file or directory Installing psnup install: psnup: No such file or directory Installing psresize install: psresize: No such file or directory make: *** [install.bin] Error 71 Error: The following dependencies failed to build: psutils Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/19427> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #16300: e2fsprogs-1.40.6 Configuration error - build failure
by MacPorts 08 Aug '09

08 Aug '09

#16300: e2fsprogs-1.40.6 Configuration error - build failure ------------------------------------------+--------------------------------- Reporter: joshua.friedman(a)mections.net | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------------------+--------------------------------- I'm on os x 10.4 and e2fsprogs is failing to link. making all in lib/ext2fs GEN_BSD_SOLIB libext2fs.2.1.dylib ld: common symbols not allowed with MH_DYLIB output format with the -multi_module option tdb.o definition of common _tdb_null (size 8) /usr/bin/libtool: internal link edit command failed make[2]: *** [libext2fs.2.1.dylib] Error 1 make[1]: *** [all-libs-recursive] Error 1 make: *** [all] Error 2 -- Ticket URL: <http://trac.macports.org/ticket/16300> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #18486: E2fsprogs 1.41.4
by MacPorts 08 Aug '09

08 Aug '09

#18486: E2fsprogs 1.41.4 ------------------------------------------+--------------------------------- Reporter: macsforever2000@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.7.0 Keywords: | Port: e2fsprogs ------------------------------------------+--------------------------------- E2fsprogs should be updated to version 1.41.4. -- Ticket URL: <http://trac.macports.org/ticket/18486> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #19567: ports for Mayavi and its Enthought dependencies
by MacPorts 07 Aug '09

07 Aug '09

#19567: ports for Mayavi and its Enthought dependencies -------------------------------+-------------------------------------------- Reporter: jjstickel@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: python vtk | Port: mayavi -------------------------------+-------------------------------------------- I provide here portfiles for Mayavi (py25 version) and its dependencies from Enthought (http://code.enthought.com/) For Mayavi to work, VTK5 must be installed with the carbon variant (and the python variant, obviously). -- Ticket URL: <http://trac.macports.org/ticket/19567> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 10

[MacPorts] #17809: RFE: Add correct dependencies for use_* in configure
by MacPorts 07 Aug '09

07 Aug '09

#17809: RFE: Add correct dependencies for use_* in configure ---------------------------------------------------------------------------------------+ Reporter: raimue@… | Owner: raimue@… Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts 1.8.0 Component: ports | Version: 1.7.0 Keywords: configure dependencies use_autoconf use_autoreconf use_automake use_xmkmf | Port: ---------------------------------------------------------------------------------------+ There are some options available to run configuration script generators before configure. * use_autoconf * use_autoreconf * use_automake * use_xmkmf All of them require tools to be provided by the system or to be installed by MacPorts. -- Ticket URL: <http://trac.macports.org/ticket/17809> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #18104: GnuRadio on Macports
by MacPorts 07 Aug '09

07 Aug '09

#18104: GnuRadio on Macports -------------------------------------+-------------------------------------- Reporter: horiacosmin@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Port Submissions Component: ports | Version: 1.7.0 Keywords: | Port: -------------------------------------+-------------------------------------- # $gnuradio$ PortSystem 1.7.0 # ? name gnuradio version 3.1.3 categories # ? /SDR software defined radio? maintainers # ? description software defined radio long_description GNU Radio is a free software development toolkit that provides the signal processing runtime and processing blocks to implement software radios using readily-available, low-cost external RF hardware and commodity processors. It is widely used in hobbyist, academic and commercial environments to support wireless communications research as well as to implement real-world radio systems. GNU Radio applications are primarily written using the Python programming language, while the supplied, performance-critical signal processing path is implemented in C++ using processor floating point extensions where available. Thus, the developer is able to implement real-time, high- throughput radio systems in a simple-to-use, rapid-application-development environment. While not primarily a simulation tool, GNU Radio does support development of signal processing algorithms using pre-recorded or generated data, avoiding the need for actual RF hardware. homepage http://gnuradio.org/trac platforms darwin master_sites http://www.gnu.org/software/gnuradio/ checksums # ? # ? depends_lib port:libtool \ port:gawk \ port:guile \ port:pkgconfig \ port:zlib \ port:automake \ port:swig \ port:cppunit \ port:fftw-3-single \ port:sdcc \ port:python \ port:py-numpy \ port:py-wxpython \ port:doxygen \ port:boost \ port:libusb configure.args # Maybe "--with-boost-include-dir=<path>" -- Ticket URL: <http://trac.macports.org/ticket/18104> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 12