July 2009 - macports-tickets - lists.macosforge.org

[MacPorts] #19465: tor: should be launched via plist file
by MacPorts 19 Jan '13

19 Jan '13

#19465: tor: should be launched via plist file ---------------------------------+------------------------------------------ Reporter: cilly@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: tor ---------------------------------+------------------------------------------ make sure to create @PREFIX@/var/run/tor and @PREFIX@/var/lib/tor with appropriate permissions. -- Ticket URL: <http://trac.macports.org/ticket/19465> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #20004: gnome-sharp2: update to version 2.24.1
by MacPorts 10 Jan '13

10 Jan '13

#20004: gnome-sharp2: update to version 2.24.1 ---------------------------------+------------------------------------------ Reporter: devans@… | Owner: nox@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: gnome-sharp2 ---------------------------------+------------------------------------------ This is the latest version. Source available here: http://ftp.gnome.org/pub/GNOME/sources/gnome- sharp/2.24/gnome-sharp-2.24.1.tar.bz2 -- Ticket URL: <http://trac.macports.org/ticket/20004> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #18276: wget: locale and ssl support missing with +universal variant
by MacPorts 10 Jan '13

10 Jan '13

#18276: wget: locale and ssl support missing with +universal variant -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: ryandesign@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: wget -------------------------------------+-------------------------------------- When installed with the +universal variant, wget is missing the message catalogs in the locale directory and wget doesn't link with libintl, libssl or libcrypto. Here's the non-universal build which works: {{{ $ sudo port -d install wget > wget.txt 2>&1 $ wget https://trac.macports.org/ --2009-01-29 21:17:56-- https://trac.macports.org/ Resolving trac.macports.org... 17.254.17.55 Connecting to trac.macports.org|17.254.17.55|:443... connected. ERROR: cannot verify trac.macports.org's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certificates.godaddy.com/repository/CN=Go Daddy Secure Certification Authority/serialNumber=07969287': Self-signed certificate encountered. To connect to trac.macports.org insecurely, use `--no-check-certificate'. Unable to establish SSL connection. $ LANG=de wget wget: URL fehlt Syntax: wget [OPTION]... [URL]... >>wget --help<< gibt weitere Informationen. $ }}} Here's the universal build which is broken: {{{ $ sudo port deactivate wget ---> Deactivating wget $ sudo port -d install wget +universal > wget-universal.txt 2>&1 $ wget https://trac.macports.org/ https://trac.macports.org/: Unsupported scheme. $ LANG=de wget wget: missing URL Usage: wget [OPTION]... [URL]... Try `wget --help' for more options. $ }}} Note the differences in what libraries are being linked with: {{{ $ cd /opt/local/var/macports/software/wget $ diff -rq 1.11.4_2 1.11.4_2+universal Files 1.11.4_2/opt/local/bin/wget and 1.11.4_2+universal/opt/local/bin/wget differ Only in 1.11.4_2/opt/local/share: locale Files 1.11.4_2/opt/local/share/man/man1/wget.1.gz and 1.11.4_2+universal/opt/local/share/man/man1/wget.1.gz differ $ otool -L 1.11.4_2/opt/local/bin/wget 1.11.4_2/opt/local/bin/wget: /opt/local/lib/libintl.8.dylib (compatibility version 9.0.0, current version 9.2.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 88.3.11) /opt/local/lib/libssl.0.9.8.dylib (compatibility version 0.9.8, current version 0.9.8) /opt/local/lib/libcrypto.0.9.8.dylib (compatibility version 0.9.8, current version 0.9.8) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) $ otool -L 1.11.4_2+universal/opt/local/bin/wget 1.11.4_2+universal/opt/local/bin/wget: /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 88.3.9) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) $ }}} -- Ticket URL: <http://trac.macports.org/ticket/18276> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #19615: nss @3.12.3 Undefined Symbol _sqlite3_prepare_v2
by MacPorts 10 Jan '13

10 Jan '13

#19615: nss @3.12.3 Undefined Symbol _sqlite3_prepare_v2 -----------------------------------+---------------------------------------- Reporter: ctempleton3@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: nss -----------------------------------+---------------------------------------- {{{ $ sudo port install nss ---> Building nss Error: Target org.macports.build returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.mac ports.org_release_ports_net_nss/work/nss-3.12.3 && make -C mozilla/security/coreconf/nsinstall && make -C mozilla/security/dbm && ma ke -C mozilla/security/nss NSPR_LIB_DIR=/opt/local/lib/nspr NSS_USE_SYSTEM_SQLITE=1" returned error 2 Command output: cd symkeyutil; make export make[2]: Nothing to be done for `export'. cd tests; make export cd tests; make export make[2]: Nothing to be done for `export'. cd tstclnt; make export make[2]: Nothing to be done for `export'. cd vfychain; make export make[2]: Nothing to be done for `export'. cd vfyserv; make export make[2]: Nothing to be done for `export'. cd modutil; make export make[2]: Nothing to be done for `export'. cd lib; make libs cd util; make libs ../../../coreconf/nsinstall/Darwin8.11.0_gcc-4.0_DBG.OBJ/nsinstall -R -m 664 Darwin8.11.0_gcc-4.0_DBG.OBJ/libnssutil.a ../../../../dist/Darwin8.11.0_gcc-4.0_DBG.OBJ/lib ../../../coreconf/nsinstall/Darwin8.11.0_gcc-4.0_DBG.OBJ/nsinstall -R -m 775 Darwin8.11.0_gcc-4.0_DBG.OBJ/libnssutil3.dylib ../../../../dist/Darwin8.11.0_gcc-4.0_DBG.OBJ/lib cd freebl; make libs ../../../coreconf/nsinstall/Darwin8.11.0_gcc-4.0_DBG.OBJ/nsinstall -R -m 664 Darwin8.11.0_gcc-4.0_DBG.OBJ/libfreebl.a ../../../../dist/Darwin8.11.0_gcc-4.0_DBG.OBJ/lib make FREEBL_CHILD_BUILD=1 \ OBJDIR=Darwin8.11.0_gcc-4.0_DBG.OBJ/Darwin_SINGLE_SHLIB libs ../../../coreconf/nsinstall/Darwin8.11.0_gcc-4.0_DBG.OBJ/nsinstall -R -m 775 Darwin8.11.0_gcc-4.0_DBG.OBJ/Darwin_SINGLE_SHLIB/libfreebl3.dylib ../../../../dist/Darwin8.11.0_gcc-4.0_DBG.OBJ/lib cd softoken; make libs rm -f Darwin8.11.0_gcc-4.0_DBG.OBJ/libsoftokn3.dylib /usr/bin/gcc-4.0 -dynamiclib -compatibility_version 1 -current_version 1 -install_name /opt/local/lib/nss/libsoftokn3.dylib -headerpad_max_install_names -L/opt/local/lib/nspr -o Darwin8.11.0_gcc-4.0_DBG.OBJ/libsoftokn3.dylib Darwin8.11.0_gcc-4.0_DBG.OBJ/ecdecode.o Darwin8.11.0_gcc-4.0_DBG.OBJ/fipsaudt.o Darwin8.11.0_gcc-4.0_DBG.OBJ/fipstest.o Darwin8.11.0_gcc-4.0_DBG.OBJ/fipstokn.o Darwin8.11.0_gcc-4.0_DBG.OBJ/lgglue.o Darwin8.11.0_gcc-4.0_DBG.OBJ/lowkey.o Darwin8.11.0_gcc-4.0_DBG.OBJ/lowpbe.o Darwin8.11.0_gcc-4.0_DBG.OBJ/padbuf.o Darwin8.11.0_gcc-4.0_DBG.OBJ/pkcs11.o Darwin8.11.0_gcc-4.0_DBG.OBJ/pkcs11c.o Darwin8.11.0_gcc-4.0_DBG.OBJ/pkcs11u.o Darwin8.11.0_gcc-4.0_DBG.OBJ/rsawrapr.o Darwin8.11.0_gcc-4.0_DBG.OBJ/sdb.o Darwin8.11.0_gcc-4.0_DBG.OBJ/sftkdb.o Darwin8.11.0_gcc-4.0_DBG.OBJ/sftkmod.o Darwin8.11.0_gcc-4.0_DBG.OBJ/sftkpars.o Darwin8.11.0_gcc-4.0_DBG.OBJ/sftkpwd.o Darwin8.11.0_gcc-4.0_DBG.OBJ/softkver.o Darwin8.11.0_gcc-4.0_DBG.OBJ/tlsprf.o ../../../../dist/Darwin8.11.0_gcc-4.0_DBG.OBJ/lib/libfreebl.a -L../../../../dist/Darwin8.11.0_gcc-4.0_DBG.OBJ/lib -lnssutil3 -lsqlite3 -L/opt/local/lib/nspr -lplc4 -lplds4 -lnspr4 ld: Undefined symbols: _sqlite3_prepare_v2 /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/libtool: internal link edit command failed make[2]: *** [Darwin8.11.0_gcc-4.0_DBG.OBJ/libsoftokn3.dylib] Error 1 make[1]: *** [libs] Error 2 make: *** [libs] Error 2 Error: Status 1 encountered during processing. $ }}} -- Ticket URL: <http://trac.macports.org/ticket/19615> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #20448: doxygen +wizard fails to build on Tiger
by MacPorts 04 Jan '13

04 Jan '13

#20448: doxygen +wizard fails to build on Tiger -----------------------------------+---------------------------------------- Reporter: ccorn@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: QT | Port: doxygen -----------------------------------+---------------------------------------- Port: doxygen 1.5.9 +wizard (svn -r54420) Platform: Mac OS X 10.4.11 on a Powerbook G4 (Darwin 8.11.0/powerpc) Building DoxyWizard aborts with the attached linker errors. Two issues emerge from that: (1) Linking DoxyWizard does not find -lpng. The linker command line misses either an -L${worksrcdir}/libpng (yes, doxygen builds a static copy of libpng) or an -L${prefix}/lib. With respect to a given lib dependency port:libpng and a given post-patch action that inserts ${configure.cppflags} right after the compiler command, I have decided to insert ${configure.ldflags} right after the linker command as well. Thus, MacPort's libpng should be used. At least I hoped so. However, this still did not produce the desired linker command. (But I left the patch in for symmetry reasons.) Finally, I resorted to build.env-append LIBRARY_PATH=${prefix}/lib within the definition of variant wizard. This helped. (2) Universal binaries are built without demand. First, I supposed that this is because there is a second post-patch definition for variant wizard which might override the previous post-patch definition. I have moved the post-patch and post-destroot commands out of the variant definition, and I have guarded them with a test for variant wizard or platform darwin where necessary. Note that the present patches to doxywizard makefiles can mostly be applied without regard to whether variant wizard is in effect, but the patches are appropriate for macosx/darwin only. Therefore, most patches are guarded by the platform test alone. Again, this alone did not help. (I left the patch in because having several post-patch definitions looks confusing anyway.) Finally, I found that addon/doxywizard/doxywizard.pro.in itself specifies "CONFIG += x86 ppc". I have added a patchfile to remove that unless the universal variant is desired. This made the difference. Some quirks removed by the way: (3) ${tmake_conf} was used in post-patch actions, but defined for platform darwin only. I have moved the definition into the post-patch section. Both the definition and the affected patch action are conditioned on a test for platform darwin now. (4) The build dependency bin:ginstall:coreutils is not needed. Just add --install /usr/bin/install to configure.args, and doxygen will use that. Also relevant for ticket #18400. I have attached a Portfile patch, an additional patchfile and the (previous) error excerpts. The patches succeed in building doxygen +wizard and doxygen -wizard correctly on my platform. -- Ticket URL: <http://trac.macports.org/ticket/20448> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #18928: Update py-uid port
by MacPorts 29 Dec '12

29 Dec '12

#18928: Update py-uid port -------------------------------------+-------------------------------------- Reporter: arthur@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.7.0 Keywords: uid | Port: py-uid -------------------------------------+-------------------------------------- - Take maintainership - Update to 1.0.3 Please remove the file "files/uid". -- Ticket URL: <http://trac.macports.org/ticket/18928> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #16822: qemu-usermode: update to 0.9.1
by MacPorts 20 Dec '12

20 Dec '12

#16822: qemu-usermode: update to 0.9.1 -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: mww(a)macports.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: | Port: qemu-usermode -------------------------------------+-------------------------------------- qemu 0.9.1 is available so you may want to update the qemu-usermode port to that version. When you do so, you should also add the line "{{{dist_subdir qemu}}}" so that the download goes to the same directory as the qemu port. -- Ticket URL: <http://trac.macports.org/ticket/16822> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 16

[MacPorts] #16036: Memory error when using SoapClient with PHP 5.2.6
by MacPorts 24 Nov '12

24 Nov '12

#16036: Memory error when using SoapClient with PHP 5.2.6 -----------------------------------+---------------------------------------- Reporter: contact(a)reubidium.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: php php5 soap | -----------------------------------+---------------------------------------- Hello, I have been using the Entropy PHP package on my aluminum iMac running Leopard 10.5.4, but I wanted to try the MacPorts install to see if I could get ZendDebugger to work. I installed PHP as '{{{php5 @5.2.6_1+apache2+ipc+macosx+mysql5+pcntl+pear+pspell+readline+sockets+t1lib+tidy}}}' and was indeed able to get ZendDebugger to work, however I've found that all points in my application that use SoapClient will error out with the message "{{{PHP Fatal error: Possible integer overflow in memory allocation (3819152326 * 4 + 0)}}}". My memory limit is set to 256M in PHP.ini, up from 128M default.. tried raising it even to 512M but this has no effect. But again, never seen this happen in either my Entropy dev environment or on our QA and production servers. I've googled for 'PHP SOAP "integer overflow"' and found no clues.. So I guess I will be going back to the Entropy package with no ZendDebugger for now.. Here's the output of port installed, maybe something in here will key some knowledgeable eyes to my problem: The following ports are currently installed: {{{ apache2 @2.2.9_1+darwin_9 (active) apr @1.2.12_1+darwin_9 apr @1.3.2_0+darwin_9 (active) apr-util @1.2.12_0 apr-util @1.3.2_0 (active) aspell @0.60.6_1+macosx (active) autoconf @2.62_0 (active) automake @1.10.1_0 (active) bzip2 @1.0.5_0 bzip2 @1.0.5_1 (active) curl @7.18.1_1 curl @7.18.2_0 (active) cyrus-sasl2 @2.1.21_0+kerberos (active) db44 @4.4.20_1 (active) db46 @4.6.21_1 (active) expat @2.0.1_0 (active) fontconfig @2.5.0_0+macosx fontconfig @2.6.0_0+macosx (active) freetype @2.3.5_1 freetype @2.3.7_1 (active) gawk @3.1.6_0 (active) gd2 @2.0.35_0 gd2 @2.0.35_1 (active) gettext @0.17_3 (active) gmake @3.81_0 (active) gperf @3.0.3_0 (active) help2man @1.36.4_1 (active) jpeg @6b_2 (active) libiconv @1.12_0 (active) libmcrypt @2.5.8_0 (active) libpng @1.2.24_0 libpng @1.2.29_0 (active) libtool @1.5.24_2 libtool @1.5.26_0 (active) libxml @1.8.17_0 (active) libxml2 @2.6.31_0 libxml2 @2.6.32_1 (active) libxslt @1.1.22_0 libxslt @1.1.23_0 (active) m4 @1.4.11_0 (active) mhash @0.9.9_0 (active) mysql5 @5.0.51a_0+server (active) ncurses @5.6_0 (active) ncursesw @5.6_1 (active) neon @0.26.4_1 (active) openssl @0.9.8g_0 openssl @0.9.8h_0 (active) p5-locale-gettext @1.05_0 (active) pcre @7.6_0 pcre @7.7_0 (active) perl5.8 @5.8.8_3+darwin_9 (active) php5 @5.2.6_1+apache2+ipc+macosx+mysql5+pcntl+pear+pspell+readline+sockets+t1lib+tidy (active) pkgconfig @0.23_0 (active) readline @5.2.007_0+darwin_9 readline @5.2.012_1 (active) serf @0.2.0_0 (active) sqlite3 @3.5.8_0 (active) subversion @1.5.0_1 (active) t1lib @5.1.1_0 (active) texinfo @4.11_0 (active) tidy @20051026_0 (active) tiff @3.8.2_1+macosx tiff @3.8.2_2+darwin_9+macosx (active) unrar @3.7.8_0 (active) zlib @1.2.3_1 (active) }}} Thanks all. it's always somethin' isn't it? -- Ticket URL: <http://trac.macports.org/ticket/16036> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #19557: Provide "Batteries Included" haskell platform instead/as variant of ghc?
by MacPorts 06 Nov '12

06 Nov '12

#19557: Provide "Batteries Included" haskell platform instead/as variant of ghc? ---------------------------------------+------------------------------------ Reporter: macports.org@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: haskell ghc | Port: ghc ---------------------------------------+------------------------------------ http://hackage.haskell.org/platform/ The Platform is the bundling of GHC 6.10.2 (until it targets other compilers as well) and a bunch of best of breed tools and libraries (http://hackage.haskell.org/platform/contents.html) It might provide a better experience than raw GHC + cabal. -- Ticket URL: <http://trac.macports.org/ticket/19557> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #17877: mutt 1.4.2.3 (with +compress) fails with "aclocal-1.9: command not found"
by MacPorts 04 Nov '12

04 Nov '12

#17877: mutt 1.4.2.3 (with +compress) fails with "aclocal-1.9: command not found" -----------------------------------------+---------------------------------- Reporter: shreevatsa.public@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: mutt -----------------------------------------+---------------------------------- Build failure: {{{ sudo port install mutt +buffy +compress ---> Fetching mutt ---> Verifying checksum(s) for mutt ---> Extracting mutt ---> Applying patches to mutt ---> Configuring mutt ---> Building mutt Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_mail_mutt/work/mutt-1.4.2.3" && make all " returned error 2 Command output: ./gen_defs ./OPS ./OPS.PGP > keymap_defs.h ./patchlist.sh < ./PATCHES > patchlist.c cd . && /bin/sh /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_mail_mutt/work/mutt-1.4.2.3/missing --run aclocal-1.9 -I m4 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_mail_mutt/work/mutt-1.4.2.3/missing: line 46: aclocal-1.9: command not found WARNING: `aclocal-1.9' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the `README' file, it often tells you about the needed prerequirements for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing `aclocal-1.9' program. make: *** [aclocal.m4] Error 1 Error: Status 1 encountered during processing. }}} It builds fine without +compress. In both /usr/bin/ and /opt/local/bin/, I have `aclocal` and `aclocal-1.10`, no `aclocal-1.9`. -- Ticket URL: <http://trac.macports.org/ticket/17877> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7