January 2010 - macports-tickets - lists.macosforge.org

[MacPorts] #18211: xprobe2-0.3: runtime error - ping modules cause errors
by MacPorts 13 Jun '14

13 Jun '14

#18211: xprobe2-0.3: runtime error - ping modules cause errors -------------------------------------------+-------------------------------- Reporter: simon@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: xprobe2 ping invalid argument | Port: xprobe2 -------------------------------------------+-------------------------------- The first three modules are broken in xprobe2-0.3 as they generate the following error when being executed: {{{ TX_IP::sendpack::sendto: Invalid argument }}} Unfortunately the program is useless with all "ping:" modules disabled as every machine seems to be down for it. Since there is a darwin 8 platform section I guess that this might be platform dependent and it might be worth checking this on different releases. This one is failing on 10.5.6 on an Intel iMac. -- Ticket URL: <http://trac.macports.org/ticket/18211> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #22747: libssh2 universal build fails
by MacPorts 13 Jun '14

13 Jun '14

#22747: libssh2 universal build fails -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: pmq@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: libssh2 -------------------------------------+-------------------------------------- A universal build of libssh2 fails: {{{ MacPorts running without privileges. You may be unable to complete certain actions (eg install). ---> Computing dependencies for libssh2 MacPorts running without privileges. You may be unable to complete certain actions (eg install). ---> Fetching libssh2 MacPorts running without privileges. You may be unable to complete certain actions (eg install). ---> Verifying checksum(s) for libssh2 MacPorts running without privileges. You may be unable to complete certain actions (eg install). ---> Extracting libssh2 MacPorts running without privileges. You may be unable to complete certain actions (eg install). MacPorts running without privileges. You may be unable to complete certain actions (eg install). ---> Configuring libssh2 ---> Configuring libssh2 for architecture x86_64 ---> Configuring libssh2 for architecture i386 MacPorts running without privileges. You may be unable to complete certain actions (eg install). ---> Building libssh2 ---> Building libssh2 for architecture x86_64 ---> Building libssh2 for architecture i386 MacPorts running without privileges. You may be unable to complete certain actions (eg install). ---> Staging libssh2 into destroot ---> Staging libssh2 into destroot for architecture x86_64 ---> Staging libssh2 into destroot for architecture i386 Error: Target org.macports.destroot returned: /mp/lib/pkgconfig/libssh2.pc differs in /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_libssh2/work/destroot-i386 and /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_libssh2/work/destroot-x86_64 and cannot be merged Error: Unable to upgrade port: 1 }}} Here's the difference between those files: {{{ --- work/destroot-i386/mp/lib/pkgconfig/libssh2.pc 2009-12-01 18:24:00.000000000 -0600 +++ work/destroot-x86_64/mp/lib/pkgconfig/libssh2.pc 2009-12-01 18:23:58.000000000 -0600 @@ -11,6 +11,6 @@ URL: http://www.libssh2.org/ Description: Library for SSH based connunication Version: 1.2.1 -Libs: -L${libdir} -lssh2 -L/mp/lib -arch i386 +Libs: -L${libdir} -lssh2 -L/mp/lib -arch x86_64 Libs.private: Cflags: -I${includedir} }}} The arch flags should be removed from the .pc file. -- Ticket URL: <http://trac.macports.org/ticket/22747> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #16598: ettercap do not work on Mac OS X 10.5.5
by MacPorts 12 Jun '14

12 Jun '14

#16598: ettercap do not work on Mac OS X 10.5.5 -------------------------------+-------------------------------------------- Reporter: monserg(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: ettercap mac ox x | Port: ettercap-ng -------------------------------+-------------------------------------------- ettercap do not work on Mac OS X 10.5.5. card: AirportExtreme ( (0x14E4, 0x88) (Broadcom 4328 (4.170.46.11) ) ) installation fine with: sudo port install ettercap-ng but, when executing a test: ettercap -Tzq -i en1 got this error: ettercap NG-0.7.3 copyright 2001-2004 ALoR & NaGA Listening on en1... (Ethernet) ERROR : 6, Device not configured [ec_send.c:send_init:114] libnet_init(LIBNET_RAW4_ADV) failed: libnet_init(): UID or EUID of 0 required -- Ticket URL: <http://trac.macports.org/ticket/16598> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #16110: libxml2: attempts to use libxslt.1.dylib
by MacPorts 06 Jun '14

06 Jun '14

#16110: libxml2: attempts to use libxslt.1.dylib -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: cedric.luthi(a)gmail.com Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- I previously had libxml2 2.6.32_1 and libxslt 1.1.23_0 installed. I forcibly uninstalled libxml2 and reinstalled it, to test an issue. During the reinstall, this message appeared in the debug output, and also a Mac OS X Crash Reporter dialog appeared with similar information: {{{ dyld: lazy symbol binding failed: Symbol not found: _xmlXPathContextSetCache Referenced from: /mp/lib/libxslt.1.dylib Expected in: flat namespace dyld: Symbol not found: _xmlXPathContextSetCache Referenced from: /mp/lib/libxslt.1.dylib Expected in: flat namespace }}} `/mp` is my MacPorts prefix. So it seems that libxml2 is trying to load libxslt.1.dylib during the build. You must modify the port so that this does not happen, because libxml2 does not declare a dependency on libxslt (and it cannot, since libxslt declares a dependency on libxml2, and we cannot have circular dependencies). I am running Mac OS X 10.4.11 on an Intel Mac with Xcode 2.5 and MacPorts from trunk @38557. -- Ticket URL: <http://trac.macports.org/ticket/16110> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #21294: Enable cffi support in swig?
by MacPorts 05 Jun '14

05 Jun '14

#21294: Enable cffi support in swig? ------------------------------------+--------------------------------------- Reporter: glen.henshaw@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Keywords: swig, cffi | Port: swig 1.3.40 ------------------------------------+--------------------------------------- Swig 1.3.40 supports cffi, but the port does not have a variant for it, and the +universal variant does not seem to do anything. Would it be possible to enable cffi support? Is it possible to enable support for the other languages swig supports but for which there are no port variants? The built-in OSX swig does support cffi, but the implementation is quite old. -- Ticket URL: <http://trac.macports.org/ticket/21294> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #20309: qt4-x11 doesn't support 10.6 yet
by MacPorts 15 May '14

15 May '14

#20309: qt4-x11 doesn't support 10.6 yet ------------------------------+--------------------------------------------- Reporter: snc@… | Owner: mcalhoun@… Type: defect | Status: new Priority: Low | Milestone: Component: ports | Version: 1.8.0 Keywords: | Port: qt4-x11 ------------------------------+--------------------------------------------- qt4-x11 builds while build, citing an unsupported version of 10.6. Might be an upstream issue? Setting to low priority as 10.6 is not out yet. {{{ /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_qt4-x11/work/qt-x11 -opensource- src-4.4.3/include/QtCore/../../src/corelib/global/qglobal.h:290:6: error: #error "This version of Mac OS X is unsupported" }}} -- Ticket URL: <http://trac.macports.org/ticket/20309> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 28

[MacPorts] #23133: screen tries to use libelf
by MacPorts 02 May '14

02 May '14

#23133: screen tries to use libelf -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: digdog@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: screen -------------------------------------+-------------------------------------- libelf is installed non-universal on my system. When installing screen universal, I see this output at the end of the build phase: {{{ /usr/bin/gcc-4.2 -L/opt/local/lib -arch x86_64 -arch i386 -o screen screen.o ansi.o fileio.o mark.o misc.o resize.o socket.o search.o tty.o term.o window.o utmp.o loadav.o putenv.o help.o termcap.o input.o attacher.o pty.o process.o display.o comm.o kmapdef.o acls.o braille.o braille_tsi.o logfile.o layer.o sched.o teln.o nethack.o encoding.o -lncurses -lelf ld: warning: in /opt/local/lib/libelf.a, file is not of required architecture }}} Note this does not stop the build; the port completes installation. Previously in the configure phase it said: {{{ checking elf.h usability... no checking elf.h presence... no checking for elf.h... no }}} screen does not declare a dependency on libelf so it should not use libelf. -- Ticket URL: <http://trac.macports.org/ticket/23133> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #18789: GNU screen does not display caption correctly if terminal is wider than 256 characters
by MacPorts 01 May '14

01 May '14

#18789: GNU screen does not display caption correctly if terminal is wider than 256 characters ---------------------------------+------------------------------------------ Reporter: bryan@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: screen ---------------------------------+------------------------------------------ Similar reports, with patch, here: https://savannah.gnu.org/bugs/index.php?14153 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=271384 -- Ticket URL: <http://trac.macports.org/ticket/18789> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #16535: Add vertical split to screen as a variant
by MacPorts 01 May '14

01 May '14

#16535: Add vertical split to screen as a variant --------------------------------+------------------------------------------- Reporter: akira(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | Port: screen --------------------------------+------------------------------------------- Please provide "Vertical Split for GNU Screen" as a new variant of screen port. http://fungi.yuggoth.org/vsp4s/ -- Ticket URL: <http://trac.macports.org/ticket/16535> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #22684: Update Growl from 1.1.4 -> 1.2
by MacPorts 01 May '14

01 May '14

#22684: Update Growl from 1.1.4 -> 1.2 -------------------------------+-------------------------------------------- Reporter: ryan@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: Growl -------------------------------+-------------------------------------------- Please update Growl from 1.1.4 -> 1.2. Keep in mind the new version requires 10.5. -- Ticket URL: <http://trac.macports.org/ticket/22684> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 18