May 2010 - macports-tickets - lists.macosforge.org

[MacPorts] #18044: py-postgresql-pqueue: update to 1.0.1
by MacPorts 21 Jul '14

21 Jul '14

#18044: py-postgresql-pqueue: update to 1.0.1 -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: py-postgresql-pqueue -------------------------------------+-------------------------------------- py-postgresql-pqueue is at version 0.1 but version 1.0.1 appears to be out so the port should probably be updated. -- Ticket URL: <http://trac.macports.org/ticket/18044> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #21862: Unison +aqua fails to build on the 64-bit system
by MacPorts 17 Jul '14

17 Jul '14

#21862: Unison +aqua fails to build on the 64-bit system ---------------------------------------+------------------------------------ Reporter: kiyoshi.coquser@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: ---------------------------------------+------------------------------------ Unison aqua variant fails to build on the 64-bit system because it is not 64-bit clean. I built minimal patch to fix this issue. This patch and fixed ocaml (Ticket #21743) will make Unison +aqua also work on the 64-bit system. NOTE: 1. This patch upgrades Unison from 2.27.57 to 2.32.52, and they CAN NOT synchronize files with each other. To avoid the confusion about connection failure, It my be as well to create an new port with different name like "unison-2.32". 2. This is not the official patch. this issue will be fixed smarter way at the future version of Unison. -- Ticket URL: <http://trac.macports.org/ticket/21862> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 12

[MacPorts] #21806: Wireshark no_x11 installs without GUI
by MacPorts 09 Jul '14

09 Jul '14

#21806: Wireshark no_x11 installs without GUI --------------------------------------+------------------------------------- Reporter: lkraider+ports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: --------------------------------------+------------------------------------- I have gtk2 installed as +no_x11 +quartz -x11 After trying to install wireshark, it builds without gui, because no_x11 disables gtk2 in its Portfile. Trying to set -no_x11 doesn't work since gtk2 is already built with it enabled, and port returns an error for that. Since the build works fine with gtk2 +no_x11, I propose the '''no_x11''' be renamed to '''no_gui''' on the wireshark Portfile. -- Ticket URL: <http://trac.macports.org/ticket/21806> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #20053: Document the port naming convention of replacing ++ with xx
by MacPorts 04 Jul '14

04 Jul '14

#20053: Document the port naming convention of replacing ++ with xx ------------------------------+--------------------------------------------- Reporter: blb@… | Owner: markd@… Type: defect | Status: new Priority: Normal | Milestone: Component: guide | Version: 1.8.0 Keywords: | Port: ------------------------------+--------------------------------------------- Several ports whose "true" name have ++ in their names (libsigc++, libxml++, mysql++, and others) have the plus signs replaced with the letter x (libsigcxx2, libxmlxx, mysqlxx). This is the convention we've picked (and is also used in other project names directly like libpqxx), but we have no current documentation for it in the guide. This should be added someplace. -- Ticket URL: <http://trac.macports.org/ticket/20053> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #20377: iTerm: build fail
by MacPorts 04 Jul '14

04 Jul '14

#20377: iTerm: build fail -------------------------------+-------------------------------------------- Reporter: nefar@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: iTerm -------------------------------+-------------------------------------------- See attached log -- Ticket URL: <http://trac.macports.org/ticket/20377> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 14

[MacPorts] #20775: gnustep-base: gnustep-config: command not found
by MacPorts 02 Jul '14

02 Jul '14

#20775: gnustep-base: gnustep-config: command not found -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: gnustep-base -------------------------------------+-------------------------------------- I can't seem to install gnustep-base on (Mac OS X 10.4.11 Intel) because it cannot find gnustep-config: {{{ $ port install Etoile ---> Fetching gnustep-make ---> Attempting to fetch gnustep-make-2.2.0.tar.gz from http://distfiles.macports.org/gnustep-make ---> Verifying checksum(s) for gnustep-make ---> Extracting gnustep-make ---> Configuring gnustep-make ---> Building gnustep-make ---> Staging gnustep-make into destroot Warning: gnustep-make requests to install files outside the common directory structure! ---> Installing gnustep-make @2.2.0_0+gnustep_layout ########################################################## To have a fully working GNUstep make system, please add '. /mp/GNUstep/System/Library/Makefiles/GNUstep.sh' to your shell login (in ~/.profile) You may also want to set up your MANPATH : export MANPATH=$GNUSTEP_LOCAL_ROOT/Library/Documentation/man:$GNUSTEP_SYSTEM_ROOT/Library/Documentation/man:/mp/share/man:/usr/share/man ########################################################## ---> Activating gnustep-make @2.2.0_0+gnustep_layout ---> Cleaning gnustep-make ---> Fetching gnustep-base ---> Attempting to fetch gnustep-base-1.19.1.tar.gz from http://distfiles.macports.org/gnustep-base ---> Verifying checksum(s) for gnustep-base ---> Extracting gnustep-base ---> Applying patches to gnustep-base Warning: reinplace s|GNUSTEP_INSTALLATION_DIR = $(GNUSTEP_SYSTEM_ROOT)|GNUSTEP_INSTALLATION_DOMAIN=SYSTEM|g didn't change anything in /mp/var/macports/build /_Users_rschmidt_macports_dports_gnustep_gnustep-base/work/gnustep- base-1.19.1/GNUmakefile ---> Configuring gnustep-base Error: Target org.macports.configure returned: configure failure: shell command " cd "/mp/var/macports/build /_Users_rschmidt_macports_dports_gnustep_gnustep-base/work/gnustep- base-1.19.1" && ./configure --prefix=/mp CC=gcc-mp-4.2 GNUSTEP_MAKEFILES=/mp/share/GNUstep/Makefiles --disable-tls --enable- libffi --with-ffi-include=/mp/include/gcc42 --with-ffi- library=/mp/lib/gcc42 " returned error 1 Command output: ./configure: line 1: gnustep-config: command not found configure: error: cannot find install-sh or install.sh in /mp/share/GNUstep/Makefiles .//mp/share/GNUstep/Makefiles Error: The following dependencies failed to build: SQLClient Performance gnustep-base oniguruma5 poppler openjpeg poppler-data Error: Status 1 encountered during processing. $ }}} -- Ticket URL: <http://trac.macports.org/ticket/20775> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 28

[MacPorts] #23490: geant4 links with Apple X11 libraries
by MacPorts 01 Jul '14

01 Jul '14

#23490: geant4 links with Apple X11 libraries -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: cristiano.fontana@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: -------------------------------------+-------------------------------------- geant4 links with Apple X11 libraries. See "/usr/X11" in the output of otool -L: {{{ $ otool -L /opt/local/lib/libG4FR.dylib /opt/local/lib/libG4FR.dylib: /opt/local/var/macports/build/_Users_rschmidt_macports_dports_science_geant4/work/geant4.9.3/lib/libG4FR.dylib (compatibility version 0.0.0, current version 0.0.0) /usr/X11/lib/libGLU.1.dylib (compatibility version 1.3.0, current version 1.3.0) /usr/X11/lib/libGL.1.dylib (compatibility version 1.2.0, current version 1.2.0) /opt/local/lib/libXm.4.dylib (compatibility version 5.0.0, current version 5.2.0) /usr/X11/lib/libXpm.4.dylib (compatibility version 16.0.0, current version 16.0.0) /usr/X11/lib/libXmu.6.dylib (compatibility version 9.0.0, current version 9.0.0) /usr/X11/lib/libXt.6.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/X11/lib/libXext.6.dylib (compatibility version 11.0.0, current version 11.0.0) /usr/X11/lib/libX11.6.dylib (compatibility version 9.0.0, current version 9.0.0) /usr/X11/lib/libXi.6.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/X11/lib/libSM.6.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/X11/lib/libICE.6.dylib (compatibility version 10.0.0, current version 10.0.0) /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.0.0) }}} geant4 should instead link with MacPorts X11 libraries in /opt/local, and declare dependencies on the appropriate xorg ports. -- Ticket URL: <http://trac.macports.org/ticket/23490> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #16336: Allow multiple ports to satisfy a single dependency
by MacPorts 25 Jun '14

25 Jun '14

#16336: Allow multiple ports to satisfy a single dependency ---------------------------------+------------------------------------------ Reporter: rhwood(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ Currently there is no mechanism to specify that multiple ports may satisfy a single dependency requirement. It would be nice to be able to do so. I can think of two ways this can be done: OR dependencies:: Allow dependencies to be specified in the following fashion:[[BR]]{{{port:able|baker|charlie}}}[[BR]]where the pipe is used to separate one or more ports that may satisfy a single dependency. The first port would be used if none of the ports are installed. There should be no limit to the number of pipes, nor should there be any requirement that any pipes be used (ie, no pipes = no alternate dependencies). This should also wotk with ''bin:'' and ''path:'' type dependencies. "provides" capability in ports:: Use a "provides" key to specify that a port satisfies a particular requirement. Use the name of the port if a provides keyword is not specified. For example, if port '''able-devel''' specifies that it {{{ provides able }}} then port '''able-devel''' would be able satisfy the dependency {{{ port:able }}} in another port, without that other port having to be aware of port '''able-devel''' -- Ticket URL: <http://trac.macports.org/ticket/16336> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 12

[MacPorts] #17366: mkvtoolnix - 2.4.0 - +wxwidgets variant produces unusable binary
by MacPorts 24 Jun '14

24 Jun '14

#17366: mkvtoolnix - 2.4.0 - +wxwidgets variant produces unusable binary ------------------------------+--------------------------------------------- Reporter: krunk7@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: mkvtoolnix ------------------------------+--------------------------------------------- The +wxwidgets variant produces a binary which does not properly bind to the osx Gui framework. The end result is a correctly rendered gui that does not respond to user mouse or keyboard input nor is capable of changing focus. The fix is to place the binary in an app bundle as described in the WxWidgets Mac OSX Issues wiki: http://wiki.wxwidgets.org/WxMac_Issues -- Ticket URL: <http://trac.macports.org/ticket/17366> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #22223: Support BigTIFF format in GDAL
by MacPorts 17 Jun '14

17 Jun '14

#22223: Support BigTIFF format in GDAL ------------------------------+--------------------------------------------- Reporter: adam@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: gdal @1.6.2_0 ------------------------------+--------------------------------------------- When built with internal libtiff or with libtiff >= 4.0, GDAL supports reading and writing BigTIFF files as described here: http://www.gdal.org/frmt_gtiff.html GDAL in macports is currently 1.6.2 and the internal libtiff has been at version 4 since GDAL 1.5.0. The current libtiff in macports is 3.9.1 so the easiest way to support BigTIFF is to compile GDAL with the --with- libtiff=internal and --with-geotiff=internal options. -- Ticket URL: <http://trac.macports.org/ticket/22223> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7