June 2010 - macports-tickets - lists.macosforge.org

Re: [MacPorts] #6495: BUG: "Can't set selection" error in emacs when emacs started from remote shell
by MacPorts 05 Jun '10

05 Jun '10

#6495: BUG: "Can't set selection" error in emacs when emacs started from remote shell ----------------------------------------+----------------------------------- Reporter: vincent-opdarw@… | Owner: dports@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: Resolution: wontfix | Keywords: Port: emacs | ----------------------------------------+----------------------------------- Changes (by dports@…): * status: new => closed * resolution: => wontfix Comment: This isn't a problem under Snow Leopard and not fixable under Leopard/Tiger because of their launchd session contexts. Would be interested to hear if there's a workaround but it seems unlikely without significant effort. -- Ticket URL: <http://trac.macports.org/ticket/6495#comment:18> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

[MacPorts] #21280: emacs +x11 requires xorg-libXmu
by MacPorts 05 Jun '10

05 Jun '10

#21280: emacs +x11 requires xorg-libXmu --------------------------------+------------------------------------------- Reporter: aalorbe@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Keywords: | Port: --------------------------------+------------------------------------------- When trying to install emacs with the x11 extension using the command port -v -d install emacs +x11 the install fails. The key is the message: ld: library not found for -lXaw I attached the whole build log in case it is needed. Installing xorg-libXmu first via port -v -d install xorg-libXmu and then building emacs with (the same command) port -v -d install emacs +x11 works. I had this problem when trying to install on one Intel MacBook Pro and two PowerPC Macbooks. The solution worked for them all. -- Ticket URL: <http://trac.macports.org/ticket/21280> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #25136: trace mode failure at extract phase
by MacPorts 05 Jun '10

05 Jun '10

#25136: trace mode failure at extract phase ------------------------------+--------------------------------------------- Reporter: snc@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 1.9.99 Keywords: segfault sigsegv | Port: ------------------------------+--------------------------------------------- Immediately after debug receives "assembled command" for extract phase a segmentation fault occurs. I don't believe this should impact the 1.9.0 release so I'm going to leave the milestone empty. {{{ ---> Extracting pspp-devel DEBUG: extract phase started at Fri Jun 4 17:15:05 EDT 2010 DEBUG: Executing org.macports.extract (pspp-devel) ---> Extracting pspp-0.7.5-g38392c.tar.gz DEBUG: setting option extract.args to /opt/local/var/macports/distfiles /pspp-devel/pspp-0.7.5-g38392c.tar.gz DEBUG: Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build /_Users_aeetes_math_pspp-devel/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build /_Users_aeetes_math_pspp-devel/work" && /usr/bin/gzip -dc /opt/local/var/macports/distfiles/pspp-devel/pspp-0.7.5-g38392c.tar.gz | /usr/bin/gnutar --no-same-owner -xf -' Segmentation fault }}} -- Ticket URL: <http://trac.macports.org/ticket/25136> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #25139: RPF: icu-devel
by MacPorts 05 Jun '10

05 Jun '10

#25139: RPF: icu-devel -------------------------------+-------------------------------------------- Reporter: jpnurmi@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: -------------------------------+-------------------------------------------- It would be useful to have necessary development files for: icu @4.3.4 (devel, textproc) International Components for Unicode -- Ticket URL: <http://trac.macports.org/ticket/25139> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #22544: xemacs hangs on external commands (grep and compile)
by MacPorts 05 Jun '10

05 Jun '10

#22544: xemacs hangs on external commands (grep and compile) --------------------------------+------------------------------------------- Reporter: bgschaid@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Keywords: | Port: --------------------------------+------------------------------------------- When I try to run compile or grep inside XEmacs it hangs (only outputting the command in the *compile*/*grep* buffer) Tried tracing xemacs with sudo dtruss xemacs and the terminal is flodded with lines like (the line is always the same, the number changes) poll(0x1024B6040, 0x3, 0x0) = 1 0 My System is 10.6. Running "xemacs -q" gives the same behaviour (so it can'T be the init-files) -- Ticket URL: <http://trac.macports.org/ticket/22544> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

Re: [MacPorts] #6495: BUG: "Can't set selection" error in emacs when emacs started from remote shell
by MacPorts 05 Jun '10

05 Jun '10

#6495: BUG: "Can't set selection" error in emacs when emacs started from remote shell ----------------------------------------+----------------------------------- Reporter: vincent-opdarw@… | Owner: dports@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: emacs | ----------------------------------------+----------------------------------- Changes (by jmr@…): * cc: dports@… (removed) * cc: darren.bane@… (added) * owner: darren.bane@… => dports@… -- Ticket URL: <http://trac.macports.org/ticket/6495#comment:17> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

[MacPorts] #25131: py26-sip npt building universal
by MacPorts 04 Jun '10

04 Jun '10

#25131: py26-sip npt building universal -----------------------------------+---------------------------------------- Reporter: andre.david@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Low | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: py26-sip -----------------------------------+---------------------------------------- Same problem as in #24119. Same solution works for me. -- Ticket URL: <http://trac.macports.org/ticket/25131> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #25129: py26-bptython update to 0.9.6.2
by MacPorts 04 Jun '10

04 Jun '10

#25129: py26-bptython update to 0.9.6.2 ----------------------------+----------------------------------------------- Reporter: jls@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: ----------------------------+----------------------------------------------- see attached file -- Ticket URL: <http://trac.macports.org/ticket/25129> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

Re: [MacPorts] #12913: tetex is dead
by MacPorts 04 Jun '10

04 Jun '10

#12913: tetex is dead -----------------------------------+---------------------------------------- Reporter: zach@… | Owner: gwright@… Type: enhancement | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.5.0 Resolution: fixed | Keywords: Port: | -----------------------------------+---------------------------------------- Description changed by ryandesign@…: Old description: > The tetex port should be replaced somehow. > The tetex distribution is dead, i.e., it's former maintainer has stopped > maintaining it. > > There are 2 issues: > 1. Many people on the mac install some other TeX distribution. For > instance I have chosen TeXLive, which is sort of an "official" distro. It > works well. > 2. Since most non-macports tex distibutions bring their "own" directory > hierarchy, and since a tex distro takes almost 1 GB of disk space, I > think it is really too much of a waste of space to have a second, > "parallel" tex installation by macports. > > So macports really should detect whether or not there is already a tex > installation (at least one of the usual "suspects"); and only if there is > none, then it should install it's own. > > Best regards, > Gabriel. New description: The tetex port should be replaced somehow. [[br]] The tetex distribution is dead, i.e., it's former maintainer has stopped maintaining it. There are 2 issues: 1. Many people on the mac install some other TeX distribution. For instance I have chosen TeXLive, which is sort of an "official" distro. It works well. 2. Since most non-macports tex distibutions bring their "own" directory hierarchy, and since a tex distro takes almost 1 GB of disk space, I think it is really too much of a waste of space to have a second, "parallel" tex installation by macports. So macports really should detect whether or not there is already a tex installation (at least one of the usual "suspects"); and only if there is none, then it should install it's own. Best regards, [[br]] Gabriel. -- -- Ticket URL: <http://trac.macports.org/ticket/12913#comment:22> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

[MacPorts] #25133: latexit needs pdftex at runtime
by MacPorts 04 Jun '10

04 Jun '10

#25133: latexit needs pdftex at runtime -------------------------------------+-------------------------------------- Reporter: and.damore@… | Owner: singingwolfboy@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: latexit -------------------------------------+-------------------------------------- '''LaTeXiT''' port needs pdftex to run properly, installing it without any tex installation ends up in a non working program, not what end users expect. I suggest to add a {{{ depends_run texlive }}} Since '''texlive''' install a lot of ports you may want to add a variant to explicitly disable texlive dependency and rely on an external provided pdftex. -- Ticket URL: <http://trac.macports.org/ticket/25133> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1