June 2010 - macports-tickets - lists.macosforge.org

[MacPorts] #22819: Unladen Swallow
by MacPorts 28 Aug '14

28 Aug '14

#22819: Unladen Swallow ---------------------------------------------+------------------------------ Reporter: anand.prabhakar.patil@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: ---------------------------------------------+------------------------------ Would it be possible to make a port of Unladen Swallow, http://code.google.com/p/unladen-swallow/ ? Thanks very much, Anand -- Ticket URL: <http://trac.macports.org/ticket/22819> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #17455: mplayer doesn't build universal
by MacPorts 26 Aug '14

26 Aug '14

#17455: mplayer doesn't build universal -----------------------------------+---------------------------------------- Reporter: jeremyhu@… | Owner: ecronin@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: MPlayer -----------------------------------+---------------------------------------- configure complains about unknown arg: --disable-dependency-tracking ... deleting this from configure.args results in a single-platform binary -- Ticket URL: <http://trac.macports.org/ticket/17455> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #17799: mplayer @1.0rc2 No OSD/subtitle font after installation
by MacPorts 26 Aug '14

26 Aug '14

#17799: mplayer @1.0rc2 No OSD/subtitle font after installation -----------------------------------------+---------------------------------- Reporter: shreevatsa.public@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: mplayer -----------------------------------------+---------------------------------- After installing mplayer, there is no OSD font by default: can't see subtitles, volume, position, etc. [Yes, I did install it with osd variant (#14864) although that should probably be default anyway.] Fix: Copy or symlink a ttf font into $PREFIX/share/mplayer/subfont.ttf as per http://www.mplayerhq.hu/DOCS/HTML/en/fonts-osd.html Not attaching a patch because my choice of font may not be best :) [I think /Library/Fonts/Arial.ttf is a good choice, but any of the fonts from http://en.wikipedia.org/wiki/List_of_fonts_in_Mac_OS_X which are distributed as .ttf should be fine, or Macports might want to distribute its own font specifically for Mplayer.] -- Ticket URL: <http://trac.macports.org/ticket/17799> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #24708: p5-libxml-enno and p5-xml-dom conflict
by MacPorts 25 Aug '14

25 Aug '14

#24708: p5-libxml-enno and p5-xml-dom conflict -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: narf_tm@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: p5-libxml-enno, p5-xml-dom -------------------------------------+-------------------------------------- p5-libxml-enno and p5-xml-dom conflict; indeed the description of p5 -libxml-enno says it provides XML::DOM. We should have only a single port for this software, whichever is the latest. -- Ticket URL: <http://trac.macports.org/ticket/24708> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #16373: svn fetch type should maintain a persistent working copy
by MacPorts 20 Aug '14

20 Aug '14

#16373: svn fetch type should maintain a persistent working copy -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: base | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- "`fetch.type svn`" is inefficient in that it checks out a new working copy every time, directly to the work area. That would be like a normal port downloading the distfile every time. Instead, we should check out a working copy to that port's distpath, and then in the extract phase we should `svn export` it to the work area. Some checks will be needed in the fetch phase to ensure that an existing working copy: * has no modifications: check `svn status`. Ideally we would try to clean up the working copy, for example by `svn revert`ing modified or added or deleted files, and then in a second `svn status` run, delete any unversioned files. But it's already an improvement if we just discard the working copy if `svn status --ignore-externals` produces any output. * is from the right URL: check `svn info`: check if the "URL" is the one we want. If not, check that the "Repository Root" is a substring of the repository we want. If yes, try to `svn switch` to the URL and revision we want; if not, discard the working copy. So the fetch phase would go something like... {{{ if {working copy exists} { if {working copy has modifications} { delete working copy } } if {working copy exists} { if {working copy url is the one we want} { svn update to the desired revision } else { if {working copy repository root matches beginning of desired url} { try to svn switch to the desired url and revision if {an error occurred} { delete working copy } } else { delete working copy } } } if {working copy doesn't exist} { check out working copy } }}} And the extract phase is simply to `svn export` the working copy from the distpath to the worksrcpath. (There is [http://subversion.tigris.org/issues/show_bug.cgi?id=2429 one problem] if the working copy has externals and the user is using Subversion earlier than 1.5, for example Subversion 1.4.whatever which is included with Leopard. But rather than spend time working around this in base, I think this is a case where the port should depend on MacPorts subversion.) -- Ticket URL: <http://trac.macports.org/ticket/16373> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 21

[MacPorts] #22724: mplayer-devel and binary codec package
by MacPorts 18 Aug '14

18 Aug '14

#22724: mplayer-devel and binary codec package -------------------------------------------+-------------------------------- Reporter: hippallium-macports@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: mencoder, binary codec | Port: mplayer-devel -------------------------------------------+-------------------------------- I have installed the binary codec package available at: http://www.mplayerhq.hu/design7/dload.html#binary_codecs However, mencoder does not appear to use those codecs because a variable would have to be set at compilation time with --win32codecsdir=DIR. -- Ticket URL: <http://trac.macports.org/ticket/22724> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #20773: Add zope2.10
by MacPorts 14 Aug '14

14 Aug '14

#20773: Add zope2.10 -----------------------------+---------------------------------------------- Reporter: martin@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: zope zope2.10 -----------------------------+---------------------------------------------- As stated on the mailing list ( http://lists.macosforge.org/pipermail /macports-users/2009-February/013697.html ) I think there should be a port for zope2.10 (and probably zope2.9, zope2.11). As with the different Python versions it is a dependency for other applications like Plone. The attached port file is tested with MacPorts 1.710, Mac OS X 10.5, Intel. -- Ticket URL: <http://trac.macports.org/ticket/20773> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #19397: scipy not completely universal
by MacPorts 14 Aug '14

14 Aug '14

#19397: scipy not completely universal -------------------------------------------+-------------------------------- Reporter: daweonline@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.1 Keywords: scipy python universal binary | Port: py26-scipy -------------------------------------------+-------------------------------- I've added "i386 x86_64" as universal flags in macports.conf. I've built python2.6 enabling universal and I successfully run it in 64 bit mode. I've built p26-scipy +universal but: {{{ >>> import scipy.signal Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/signal/__init__.py", line 9, in <module> from bsplines import * File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/signal/bsplines.py", line 3, in <module> import scipy.special File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/special/__init__.py", line 8, in <module> from basic import * File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/special/basic.py", line 8, in <module> from _cephes import * ImportError: dlopen(/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/special/_cephes.so, 2): no suitable image found. Did find: /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/special/_cephes.so: mach-o, but wrong architecture }}} and also: {{{ >>> import scipy.linalg Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/linalg/__init__.py", line 8, in <module> from basic import * File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/linalg/basic.py", line 17, in <module> from lapack import get_lapack_funcs File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/linalg/lapack.py", line 17, in <module> from scipy.linalg import flapack ImportError: dlopen(/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/linalg/flapack.so, 2): no suitable image found. Did find: /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /site-packages/scipy/linalg/flapack.so: mach-o, but wrong architecture }}} I've checked and there are a lot of others object only built for i386. Changing the universal flags to x86_64 only doesn't work. It appears that the build chain of scipy understands "universal" as "i386 ppc" only. {{{ $ port version Version: 1.710 $ uname -a Darwin host032.2b11.ifom-ieo-campus.it 9.6.3 Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386 i386 }}} -- Ticket URL: <http://trac.macports.org/ticket/19397> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 36

[MacPorts] #23772: InsightToolKit: fix linking against python 2.6 framework
by MacPorts 12 Aug '14

12 Aug '14

#23772: InsightToolKit: fix linking against python 2.6 framework -----------------------------------+---------------------------------------- Reporter: jeremyhu@… | Owner: dweber@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: python build failure | Port: cmake InsightToolkit -----------------------------------+---------------------------------------- I tried adding this to fix the linking: configure.ldflags-append -F${frameworks_dir} but that did not get passed to the cmake build process. I'm not sure if this is an issue with cmake or InsightToolkit. -- Ticket URL: <http://trac.macports.org/ticket/23772> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #23092: InsightToolKit did not build
by MacPorts 12 Aug '14

12 Aug '14

#23092: InsightToolKit did not build --------------------------------+------------------------------------------- Reporter: trog24@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: --------------------------------+------------------------------------------- Four attempts at building InsightToolKit resulted in the following error: {{{ [ 17%] Built target itkvnl_inst /usr/bin/gnumake -f Code/Common/CMakeFiles/ITKCommon.dir/build.make Code/Common/CMakeFiles/ITKCommon.dir/depend cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16-build && /opt/local/bin/cmake -E cmake_depends "Unix Makefiles" /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16/Code/Common /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16-build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16-build/Code/Common /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16-build/Code/Common/CMakeFiles/ITKCommon.dir/DependInfo.cmake --color= /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16/Utilities/CableSwig/GCC/gcc/config/rs6000 /host-darwin.c:39: error: conflicting types for 'sigaltstack' /usr/include/signal.h:89: error: previous declaration of 'sigaltstack' was here /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16/Utilities/CableSwig/GCC/gcc/config/rs6000 /host-darwin.c: In function 'segv_handler': /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16/Utilities/CableSwig/GCC/gcc/config/rs6000 /host-darwin.c:81: error: 'struct __darwin_mcontext' has no member named 'ss' /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16/Utilities/CableSwig/GCC/gcc/config/rs6000 /host-darwin.c:130: error: 'struct __darwin_mcontext' has no member named 'es' /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16/Utilities/CableSwig/GCC/gcc/config/rs6000 /host-darwin.c:131: error: 'struct __darwin_mcontext' has no member named 'ss' gnumake[2]: *** [Utilities/CableSwig/GCC/gcc/CMakeFiles/backend.dir/config/rs6000/host- darwin.o] Error 1 gnumake[1]: *** [Utilities/CableSwig/GCC/gcc/CMakeFiles/backend.dir/all] Error 2 gnumake[1]: *** Waiting for unfinished jobs.... /usr/bin/gnumake -f Code/Common/CMakeFiles/ITKCommon.dir/build.make Code/Common/CMakeFiles/ITKCommon.dir/build gnumake[2]: Nothing to be done for `Code/Common/CMakeFiles/ITKCommon.dir/build'. /opt/local/bin/cmake -E cmake_progress_report /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16-build/CMakeFiles 23 [ 18%] Built target ITKCommon gnumake: *** [all] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16-build" && /usr/bin/gnumake -j2 all " returned error 2 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_InsightToolkit/work/InsightToolkit-3.16-build" && /usr/bin/gnumake -j2 all " returned error 2 while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" Warning: the following items did not execute (for InsightToolkit): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. }}} The platform is a dual 1.73 GHz PowerPC G4 w/ 1 MB of RAM on a 133 MHz bus with 165 GB free disk space available. -- Ticket URL: <http://trac.macports.org/ticket/23092> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 23