July 2010 - macports-tickets - lists.macosforge.org

[MacPorts] #18881: AFFLIB / FUSE
by MacPorts 12 Nov '13

12 Nov '13

#18881: AFFLIB / FUSE -----------------------------------+---------------------------------------- Reporter: macports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: AFFLIB FUSE | Port: AFFLIB -----------------------------------+---------------------------------------- Would it be possible to get the FUSE variant of AFFLIB working? I'm attempting to use "affuse" from that package and get an error that FUSE isn't installed. Web support indicates that the FUSE developer files need to be installed before we complie AFFLIB. I edited the AFFLIB Portfile to enable the FUSE variant, and installed. I get the following output: {{{ configure: FUSE requested checking fuse.h usability... no checking fuse.h presence... no checking for fuse.h... no configure: fuse.h not found; Disabling FUSE support. }}} I do have MacFuse 1.7.1 installed, and fuse.h is in /opt/local/include. I'm willing to do legwork to get it going but am at the end of my current capabilities. Thanks. -- Ticket URL: <http://trac.macports.org/ticket/18881> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #17540: poppler conflicts with xpdf
by MacPorts 12 Nov '13

12 Nov '13

#17540: poppler conflicts with xpdf ----------------------------+----------------------------------------------- Reporter: gale@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ----------------------------+----------------------------------------------- poppler 0.10.1 cannot be installed simultaneously with xpdf 3.02 because there are many files that both ports try to install. poppler advertises itself as "based on the xpdf code base". If so, it should depend on xpdf instead of installing some of xpdf's files itself. Better yet, create an xpdf-tools port that contains the files common to both. The list of conflicting files is: /opt/local/bin/pdffonts /opt/local/bin/pdfimages /opt/local/bin/pdfinfo /opt/local/bin/pdftoppm /opt/local/bin/pdftops /opt/local/bin/pdftotext /opt/local/share/man/man1/pdffonts.1.gz /opt/local/share/man/man1/pdfimages.1.gz /opt/local/share/man/man1/pdfinfo.1.gz /opt/local/share/man/man1/pdftoppm.1.gz /opt/local/share/man/man1/pdftops.1.gz /opt/local/share/man/man1/pdftotext.1.gz -- Ticket URL: <http://trac.macports.org/ticket/17540> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 28

[MacPorts] #20027: perl5.8 build failure
by MacPorts 12 Nov '13

12 Nov '13

#20027: perl5.8 build failure -----------------------------+---------------------------------------------- Reporter: uttam@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: -----------------------------+---------------------------------------------- When I tried to "sudo port install wine", it gave an error that 'perl5.8' build failed. The output is attached with the attachment. Versions of: Mac OS X: 10.5.7 Macports: 1.710 Xcode: 3.1.2 -- Ticket URL: <http://trac.macports.org/ticket/20027> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 10

[MacPorts] #24361: Vineserver crashes system server when nobody is yet logged in
by MacPorts 11 Nov '13

11 Nov '13

#24361: Vineserver crashes system server when nobody is yet logged in -----------------------------------+---------------------------------------- Reporter: clint.olsen@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: crash, system server | Port: vineserver -----------------------------------+---------------------------------------- The vine server works fine once someone is logged in, but it continuously refused connections when trying to login to the primary console, and I managed to get relevant data from a logfile that was dumped upon the crash (see attached). -- Ticket URL: <http://trac.macports.org/ticket/24361> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #20111: "Function declaration isn't a prototype" in Erlang
by MacPorts 04 Nov '13

04 Nov '13

#20111: "Function declaration isn't a prototype" in Erlang ----------------------------------+----------------------------------------- Reporter: jadenb1729@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: ----------------------------------+----------------------------------------- When I try to install Erlang R13B01 using Macports 1.710 on Mac OS X.4.11 PPC (darwin 8 ppc), I get (after some successful compilation) the attached error message. I successfully installed Erlang R12B-5_1 (a long time ago). -- Ticket URL: <http://trac.macports.org/ticket/20111> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #22785: Missing dylibs for Erlang
by MacPorts 04 Nov '13

04 Nov '13

#22785: Missing dylibs for Erlang --------------------------------+------------------------------------------- Reporter: conradwt@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: snow leopard | Port: erlang --------------------------------+------------------------------------------- I noticed after building the current release of Erlang: port install erlang @R13B02_3+darwin_10+ssl That it doesn't appear to build the dynamic librarie (i.e. .dylib) files. -- Ticket URL: <http://trac.macports.org/ticket/22785> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #20180: Erlang + SCTP
by MacPorts 04 Nov '13

04 Nov '13

#20180: Erlang + SCTP ---------------------------------+------------------------------------------ Reporter: rkmspence@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: lang/erlang ---------------------------------+------------------------------------------ The basic lang/erlang port does not enable the use of SCTP and does not offer this as a variant. Patching the Portfile to facilitate this is easy (attached) but throws up a number of other problems. I have patched these issues too, but they mostly need to be fed to the upstream Erlang maintainers. I now have Erlang+SCTP working on Leopard (PPC & Intel) using the FH Muenster SCTP NKE (version 5.4.0 = latest). -- Ticket URL: <http://trac.macports.org/ticket/20180> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #17322: ddd still does not install under 10.5.4
by MacPorts 25 Oct '13

25 Oct '13

#17322: ddd still does not install under 10.5.4 -------------------------------+-------------------------------------------- Reporter: young_fish(a)gmx.de | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------+-------------------------------------------- Installation (sudo port install ddd) will freeze at ---> configure. I saw, that issue has been addressed by one user (ticket 16016, which is closed), but I have the same issue and am just wandering if the workaround is the only solution (launching an x11 window)? I'd rather use only the terminal window than the x11 terminal as I have it customized. It would be great to have all commands be able to be run in the terminal window. I understand that this is not high priority. So I am just wandering if there is an other solution to be suggested? I am running this on an Xserve. No ~/.ddd/ folder has yet been created, so I cannot attache any log file. Thanks Pelusa -- Ticket URL: <http://trac.macports.org/ticket/17322> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #17353: attempt to install gnutar seems to depend on gnutar already being installed
by MacPorts 24 Oct '13

24 Oct '13

#17353: attempt to install gnutar seems to depend on gnutar already being installed -----------------------------------+---------------------------------------- Reporter: rssolis@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gnutar | Port: -----------------------------------+---------------------------------------- Running MacOS X 10.4.11 on an *old* Powerbook. Attempt to install gnutar seems to fail due to dependency on gnutar already being installed. How do I get around this? See message below: My-PowerBook:/opt/local/bin$ sudo port install gnutar Password: ---> Extracting gettext Error: Target org.macports.extract returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gettext/work" && gzip -dc /opt/local/var/macports/distfiles/gettext/gettext-0.17.tar.gz | /usr/bin/gnutar --no-same-owner -xf - " returned error 127 Command output: sh: line 1: /usr/bin/gnutar: No such file or directory -- Ticket URL: <http://trac.macports.org/ticket/17353> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #17516: netpbm: parallel build fails
by MacPorts 15 Oct '13

15 Oct '13

#17516: netpbm: parallel build fails -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: mas@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.8.0 Keywords: | Port: netpbm -------------------------------------+-------------------------------------- With netpbm 10.26.58 and MacPorts trunk (@42849) on Mac OS X 10.4.11 Intel, the parallel build now fails: {{{ ---> Fetching netpbm ---> Verifying checksum(s) for netpbm ---> Extracting netpbm ---> Applying patches to netpbm ---> Configuring netpbm ---> Building netpbm Error: Target org.macports.build returned: shell command " cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58" && nice -n 10 gnumake -j2 messages=yes " returned error 2 Command output: rm -f nstring.h rm -f mallocvar.h ln -s /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/util/nstring.h nstring.h ln -s /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/util/mallocvar.h mallocvar.h gnumake -C /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/ -f /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/Makefile \ SRCDIR=/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58 BUILDDIR=/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58 libnetpbm.dylib gnumake -C /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/buildtools/ -f /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/buildtools/Makefile \ SRCDIR=/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58 BUILDDIR=/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58 libopt /usr/bin/gcc-4.0 -c -I/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib -I. -DNDEBUG -I/mp/include -O3 -fno-common \ -o libpm.o libpm.c /usr/bin/gcc-4.0 -c -I/mp/include -O3 -o libopt.o \ -DSHLIBPREFIXLIST="\"lib\"" \ \ libopt.c In file included from pm.h:16, from libpm.c:42: pm_config.h:487: error: redefinition of typedef 'uint32n' pm_config.h:178: error: previous declaration of 'uint32n' was here pm_config.h:488: error: redefinition of typedef 'int32n' pm_config.h:179: error: previous declaration of 'int32n' was here In file included from pm.h:16, from libpm.c:42: pm_config.h:623: error: redefinition of typedef 'pm_filepos' pm_config.h:314: error: previous declaration of 'pm_filepos' was here gnumake[3]: *** [libpm.o] Error 1 gnumake[2]: *** [/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/libnetpbm.dylib] Error 2 gnumake[2]: *** Waiting for unfinished jobs.... /usr/bin/gcc-4.0 -o libopt -L/mp/lib libopt.o gnumake[1]: *** [pgm/all] Error 2 gnumake: *** [converter/all] Error 2 Error: Unable to upgrade port: 1 }}} It succeeds if I turn off the parallel build. -- Ticket URL: <http://trac.macports.org/ticket/17516> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 10