December 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #31757: "Warning: violation" in wireshark installation
by MacPorts 06 Feb '12

06 Feb '12

#31757: "Warning: violation" in wireshark installation ---------------------------------------+------------------------------------ Reporter: ishikura.kiwamu@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: wireshark violation | Port: ---------------------------------------+------------------------------------ When I install wireshark+python27, I got following warnings: {{{ ---> Building wireshark ---> Staging wireshark into destroot Warning: violation by /opt/local/homeplug.py.sample Warning: violation by /opt/local/register-dissector.py Warning: violation by /opt/local/wspy_dissector.py Warning: violation by /opt/local/wspy_libws.py Warning: wireshark violates the layout of the ports-filesystems! Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases! ---> Installing wireshark @1.6.2_0+python27 ---> Activating wireshark @1.6.2_0+python27 ---> Cleaning wireshark }}} and I checked the following: {{{ % ls -la /opt/local/*.py* -rw-r--r-- 1 root admin 2937 10 25 02:58 /opt/local/homeplug.py.sample -rw-r--r-- 1 root admin 2444 10 25 02:58 /opt/local/register- dissector.py -rw-r--r-- 1 root admin 13155 10 25 02:58 /opt/local/wspy_dissector.py -rw-r--r-- 1 root admin 1541 10 25 02:58 /opt/local/wspy_libws.py }}} It seems that these files are located to the wrong place and are set to the wrong file mode. I moved these files to /opt/local/bin/ and changed the file mode as 0755. Is it OK? If not, please tell us the right solutions. Thank you for reading. -- Ticket URL: <https://trac.macports.org/ticket/31757> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #32686: Registry DB corrupted after selfupdate
by MacPorts 05 Feb '12

05 Feb '12

#32686: Registry DB corrupted after selfupdate -----------------------------------+---------------------------------------- Reporter: falkschramm@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: -----------------------------------+---------------------------------------- Hi there, After running "port selfupdate" today the registry DB seems to be corrupted. Before "port list outdated" was running fine. After the selfupdate it fails with the following error message: Error: /opt/local/bin/port: port installed failed: sqlite error: SQL logic error or missing database (1) while executing query: SELECT name FROM registry.ports WHERE id=572 Looking into the /opt/local/var/macports/registry/registry.db file with sqlite3 the file seems to be corrupted: sqlite> SELECT id FROM ports; Fails after ID 571 with "Error: database disk image is malformed". So far it seems that the selfupdate corrupted the registry.db file. Is there any way to rebuild/reconstruct the file? Thanks in advance, Falk -- Ticket URL: <https://trac.macports.org/ticket/32686> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 20

[MacPorts] #28423: molmol @2k.2.0 (science) build returned: shell command failed
by MacPorts 05 Feb '12

05 Feb '12

#28423: molmol @2k.2.0 (science) build returned: shell command failed ----------------------------------+----------------------------------------- Reporter: delfs@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: ----------------------------------+----------------------------------------- Darwin spanner.anu.edu.au 10.5.0 Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386 i386 Model Name: MacBook Pro Model Identifier: MacBookPro1,1 Processor Name: Intel Core Duo System Version: Mac OS X 10.6.5 (10H574) Kernel Version: Darwin 10.5.0 It seems to me that molmol is missing a dependency that will install libXpm The relevant part of the log file is {{{ :info:build gcc -o molmol -I../../tools/include -I../../sg/include -I../../include -DMAXINT=INT_MAX -I/opt/local/include -bind_at_load -I../.. -O -bind_at_load -Wall MolMol.o MolInit.o ../../lib/libcip.a ../../lib/libcmd.a ../../lib/libui.a ../../lib/libgraph.a ../../lib/libio.a ../../lib/libpu.a ../../lib/libcalc.a ../../lib/libprim.a ../../lib/libdata.a ../../lib/libattr.a ../../lib/libfileio.a ../../lib/libos.a ../../sg/lib/libsg.a ../../tools/lib/libtools.a /opt/local/lib/libtiff.3.dylib /opt/local/lib/libjpeg.dylib /opt/local/lib/libpng.dylib /usr/lib/libz.dylib -L/usr/lib -L/opt/local/lib -lX11 -lXm -lGLU -lGL /System/Library/Frameworks/OpenGL.framework/Libraries/libGL.dylib /opt/local/lib/libGLw.dylib -lXmu -lXt -lXp -lXpm -lX11 -lXext -lSM -lICE -lm -lc -lmx :info:build ld: library not found for -lXpm :info:build collect2: ld returned 1 exit status }}} -- Ticket URL: <https://trac.macports.org/ticket/28423> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #28421: xmedcon cannot be install due to pkg-config problem
by MacPorts 05 Feb '12

05 Feb '12

#28421: xmedcon cannot be install due to pkg-config problem --------------------------------+------------------------------------------- Reporter: jost@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: pkg-config problem | Port: xmedcon --------------------------------+------------------------------------------- Dear all, I tried to install Xmedcon on a newly updated Mac OS Snow Leopard. I therefore first completely removed macports (2.5 in the macports guide) and then re-installed it before trying to install xmedcon. Dependencies installed fine: The following ports are currently installed: gcc44 @4.4.5_0 (active) gmp @5.0.1_0 (active) gperf @3.0.4_0 (active) libiconv @1.13.1_0 (active) libpng @1.4.5_0 (active) mpfr @3.0.0-p8_0 (active) zlib @1.2.5_0 (active) But when it comes to xmedcon I get an error message Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for xmedcon is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_xmedcon/main.log Error: Status 1 encountered during processing. (see also the last 20 lines of the log file below or the attached log- file). Any help would be welcome (and, please, explain patiently: I am not very at ease with Linux, though not afraid of the command line ;-) Thanks in advance, Christian. ps: in fact, I only need medcon, but it seems to be unavailable nowadays without the GUI in xmedcon? :info:configure checking for XMEDCON_GLIB... configure: error: The pkg- config script could not be found or is too old. Make sure it :info:configure is in your PATH or set the PKG_CONFIG environment variable to the full :info:configure path to pkg-config. :info:configure :info:configure Alternatively, you may set the environment variables XMEDCON_GLIB_CFLAGS :info:configure and XMEDCON_GLIB_LIBS to avoid the need to call pkg- config. :info:configure See the pkg-config man page for more details. :info:configure :info:configure To get pkg-config, see <http://pkg- config.freedesktop.org/>. :info:configure See `config.log' for more details. :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_xmedcon/work/xmedcon-0.10.4" && ./configure --prefix=/opt/local --disable-gui --with-png- prefix=/opt/local " returned error 1 :error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details) :debug:configure Backtrace: configure failure: shell command failed (see log for details) while executing "$procedure $targetname" :info:configure Warning: the following items did not execute (for xmedcon): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:configure Log for xmedcon is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_xmedcon/main.log -- Ticket URL: <https://trac.macports.org/ticket/28421> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #28419: gcalcli @1.4 python error
by MacPorts 05 Feb '12

05 Feb '12

#28419: gcalcli @1.4 python error ------------------------------+--------------------------------------------- Reporter: claus@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: gcalcli ------------------------------+--------------------------------------------- I installed gcalcli @1.4 via Macports. The installation went fine, but when I'm calling "gcalcli" the shell returns "-bash: /opt/local/bin/gcalcli: /opt/local/bin/python: bad interpreter: No such file or directory". Python seems to be installed properly, several different tools that are python-based work fine. -- Ticket URL: <https://trac.macports.org/ticket/28419> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #28409: Py26-distribute - Fail to stage into destroot
by MacPorts 05 Feb '12

05 Feb '12

#28409: Py26-distribute - Fail to stage into destroot ----------------------------------+----------------------------------------- Reporter: lucaghera8@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: ----------------------------------+----------------------------------------- sudo port install py26-distribute ---> Computing dependencies for py26-distribute ---> Fetching py26-distribute ---> Attempting to fetch distribute-0.6.14.tar.gz from http://lil.fr.distfiles.macports.org/python ---> Verifying checksum(s) for py26-distribute ---> Extracting py26-distribute ---> Configuring py26-distribute ---> Building py26-distribute ---> Staging py26-distribute into destroot Error: Target org.macports.destroot returned: shell command failed (see log for details) Log for py26-distribute is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-distribute/main.log Error: Status 1 encountered during processing. -- Ticket URL: <https://trac.macports.org/ticket/28409> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #30855: AquaLess fails during installation phase
by MacPorts 05 Feb '12

05 Feb '12

#30855: AquaLess fails during installation phase -----------------------------------------+---------------------------------- Reporter: greisberger@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.1 Keywords: | Port: AquaLess -----------------------------------------+---------------------------------- AquaLess builds fins, but the installation fails.[[BR]] It seems that that the source path is wrong. {{{ :error:destroot Target org.macports.destroot returned: xinstall: Cannot stat: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_aqua_AquaLess/AquaLess/work/AquaLess-1.6-src/build/UninstalledProducts/aless, No such file or directory }}} .../build/UninstalledProducts/ does not exist[[BR]] But ''aless'' can be found in .../build/Release/ and .../build/Aqualess.build/Release/ -- Ticket URL: <https://trac.macports.org/ticket/30855> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #30665: tiemu3 fails to build under OS X 10.6.8
by MacPorts 04 Feb '12

04 Feb '12

#30665: tiemu3 fails to build under OS X 10.6.8 -----------------------------+---------------------------------------------- Reporter: rubgb@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.1 Keywords: tiemu | Port: tiemu3 -----------------------------+---------------------------------------------- I have failed to build sucessfully tiemu 3.02 under 10.6.8 This is the part of the log containing the error messages: :info:build gui/calc/calc.c: In function ‘hid_init’: :info:build gui/calc/calc.c:589: error: ‘GtkFunction’ undeclared (first use in this function) :info:build gui/calc/calc.c:589: error: (Each undeclared identifier is reported only once :info:build gui/calc/calc.c:589: error: for each function it appears in.) :info:build gui/calc/calc.c:589: error: expected ‘)’ before ‘hid_refresh’ :info:build gui/calc/calc.c:589: error: too few arguments to function ‘g_timeout_add’ :info:build gui/calc/calc.c: In function ‘hid_lcd_rate_set’: :info:build gui/calc/calc.c:643: error: ‘GtkFunction’ undeclared (first use in this function) :info:build gui/calc/calc.c:643: error: expected ‘)’ before ‘hid_refresh’ :info:build gui/calc/calc.c:643: error: too few arguments to function ‘g_timeout_add’ :info:build make[2]: *** [gui/calc/calc.o] Error 1 :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/src' :info:build make[1]: *** [all-recursive] Error 1 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02' :info:build make: *** [all] Error 2 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02' :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02" && /usr/bin/make -j2 -w all " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for tiemu3): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for tiemu3 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/main.log I have attached the main log for reference purposes as well. Many thanks in advance, Ruben -- Ticket URL: <https://trac.macports.org/ticket/30665> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #31519: update tilp2 to current version 1.15
by MacPorts 04 Feb '12

04 Feb '12

#31519: update tilp2 to current version 1.15 ----------------------------------------+----------------------------------- Reporter: LenoreHorner@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: ----------------------------------------+----------------------------------- Since May 2011, there has been a new version of tilp2 according to http://lpg.ticalc.org/prj_tilp/news.html. Could we get that version in MacPorts? -- Ticket URL: <https://trac.macports.org/ticket/31519> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #32594: Update ffmpeg from 0.7.8 to 0.9
by MacPorts 04 Feb '12

04 Feb '12

#32594: Update ffmpeg from 0.7.8 to 0.9 -------------------------------+-------------------------------------------- Reporter: ranauei@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: haspatch | Port: ffmpeg -------------------------------+-------------------------------------------- I updated this port to latest release and also I eliminated some useless dependencies like gmake and the necessity to select another compiler. I testet on my machine (MacBook Pro w/ 10.7.2 and Xcode 4.2.1 w/ Apple clang version 3.0 (tags/Apple/clang-211.12) (based on LLVM 3.0svn)) and it compiled fine. Also I moved the doc in a variant to further reduce the basic dependencies. -- Ticket URL: <https://trac.macports.org/ticket/32594> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4