February 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #20529: pthsem build failure on Tiger
by MacPorts 11 Aug '14

11 Aug '14

#20529: pthsem build failure on Tiger -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: mail@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: pthsem -------------------------------------+-------------------------------------- pthsem doesn't build on Tiger: {{{ ./libtool --mode=compile --quiet /usr/bin/gcc-4.0 -c -I/mp/include -I. -O2 -pipe -funroll-loops -fstrength-reduce -fomit-frame-pointer -ffast-math pthread.c In file included from /usr/include/sys/select.h:146, from /usr/include/unistd.h:483, from pthread.h:116, from pthread.c:42: /usr/include/signal.h:84: error: parse error before 'int' make: *** [pthread.lo] Error 1 }}} Builds fine on Leopard. -- Ticket URL: <http://trac.macports.org/ticket/20529> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #25878: lhs2tex is out of date with ghc
by MacPorts 08 Aug '14

08 Aug '14

#25878: lhs2tex is out of date with ghc ----------------------------+----------------------------------------------- Reporter: ben@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: ----------------------------+----------------------------------------------- Installing lhs2tex with all prereqs installed. {{{ Verifying checksum(s) for lhs2tex Checksumming lhs2tex-1.13.tar.gz Extracting lhs2tex Extracting lhs2tex-1.13.tar.gz Configuring lhs2tex Setup.hs:7:48: Module `Distribution.Simple.LocalBuildInfo' does not export `mkDataDir' Setup.hs:9:63: Module `Distribution.PackageDescription' does not export `setupMessage' shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_lhs2tex/work/lhs2tex-1.13 && runhaskell Setup configure --ghc --prefix=/opt/local" returned error 1 }}} Inspecting setup.hs, these imports are unused, and have been deprecated. After removing these, there are other changes This has been noted elsewhere, http://www.mail-archive.com/glasgow- haskell-bugs(a)haskell.org/msg15861.html and that and other problems seem to have been corrected in 1.16. -- Ticket URL: <http://trac.macports.org/ticket/25878> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #24280: opendx mtree violation
by MacPorts 08 Aug '14

08 Aug '14

#24280: opendx mtree violation -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: gwright@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: opendx -------------------------------------+-------------------------------------- opendx violates the mtree: {{{ bash-3.2$ sudo port install opendx ---> Fetching opendx ---> Verifying checksum(s) for opendx ---> Extracting opendx ---> Configuring opendx ---> Building opendx ---> Staging opendx into destroot Warning: violation by /opt/local/dx Warning: opendx violates the layout of the ports-filesystems! Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases! ---> Installing opendx @4.4.4_1+darwin_9 ---> Activating opendx @4.4.4_1+darwin_9 ---> Cleaning opendx }}} opendx should either not violate the mtree, or should indicate via "destroot.violate_mtree yes" that it intends to violate the mtree. -- Ticket URL: <http://trac.macports.org/ticket/24280> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #23019: ccl: reinplace didn't change anything in installer.lisp
by MacPorts 08 Aug '14

08 Aug '14

#23019: ccl: reinplace didn't change anything in installer.lisp -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: gwright@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: ccl -------------------------------------+-------------------------------------- Using the patch from #15514 I see this when installing ccl 1.3_3 or 1.4_0: {{{ ---> Computing dependencies for ccl ---> Fetching ccl ---> Verifying checksum(s) for ccl ---> Extracting ccl ---> Configuring ccl ---> Building ccl ---> Staging ccl into destroot Warning: reinplace s|"usr" "local" "asdf-install")))))|\"opt\" \"local\" \"share\" \"asdf-install\")))))| didn't change anything in /opt/local/var/macports/build/_Users_rschmidt_macports_dports_lang_ccl/work/destroot//opt/local/share/ccl/1.4/tools /asdf-install/installer.lisp ---> Deactivating ccl @1.3_3+darwin_i386 ---> Computing dependencies for ccl ---> Installing ccl @1.4_0+darwin_i386 ---> Activating ccl @1.4_0+darwin_i386 ---> Cleaning ccl }}} Maybe the reinplace is no longer needed, or needs to be modified. -- Ticket URL: <http://trac.macports.org/ticket/23019> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #19971: haskell-mode.el Development version from cvs + support for emacs-app-devel
by MacPorts 08 Aug '14

08 Aug '14

#19971: haskell-mode.el Development version from cvs + support for emacs-app-devel ---------------------------------------+------------------------------------ Reporter: marcin.zalewski@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: emacs haskell mode | Port: haskell-mode.el ---------------------------------------+------------------------------------ I wanted the haskell-mode version from CVS, and I wanted to have a variant for emacs-app-devel. Here is the resulting portfile: {{{ PortSystem 1.0 name haskell-mode.el version latest categories lang editors maintainers nomaintainer platforms darwin description An emacs major mode for editing haskell programs. long_description \ Haskell-mode is a major Emacs mode for editing \ Haskell source code. It provides syntax highlighting \ and automatic indentation and comes with inf-haskell \ which allows interaction with an inferior Haskell \ interactive loop such as the one of Hugs or GHCi. distname haskell-mode homepage //http://www-perso.iro.umontreal.ca/~monnier/elisp/ master_sites ${homepage} fetch.type cvs cvs.root :pserver:anoncvs@cvs.haskell.org:/cvs cvs.password cvs cvs.module fptools/CONTRIB/haskell-modes/emacs worksrcdir fptools/CONTRIB/haskell-modes/emacs # checksums md5 de5ff32478154a39bea3adb3b7ce0e94 depends_lib port:emacs depends_run port:ghc post-patch { reinplace s|ghci-program-path|${prefix}/bin/ghci|g ${worksrcpath}/inf-haskell.el } variant emacs_devel { depends_lib-delete port:emacs depends_lib-append port:emacs-devel } variant emacs_app_devel { depends_lib-append port:emacs-app-devel depends_lib-delete port:emacs } use_configure no build {} destroot { if {[variant_isset emacs_app_devel]} { file mkdir ${destroot}${applications_dir}/Emacs.app/Contents/Resources/site-lisp file copy ${workpath}/${worksrcdir} \ ${destroot}${applications_dir}/Emacs.app/Contents/Resources/site- lisp/$distname } else { file mkdir ${destroot}${prefix}/share/emacs/site-lisp file copy ${workpath}/${worksrcdir} \ ${destroot}${prefix}/share/emacs/site- lisp/$distname } } post-activate { if {[variant_isset emacs_app_devel]} { ui_msg "To use this, put the following into your ~/.emacs:" ui_msg "(load \"${applications_dir}/Emacs.app/Contents/Resources/site-lisp/${distname }/haskell-site-file\")" ui_msg "(add-hook 'haskell-mode-hook 'turn-on-haskell- doc-mode)" ui_msg "(add-hook 'haskell-mode-hook 'turn-on-haskell- indent)" ui_msg "(add-hook 'haskell-mode-hook 'font-lock-mode)" ui_msg "(add-hook 'haskell-mode-hook 'imenu-add-menubar- index)" ui_msg " " } else { ui_msg "To use this, put the following into your ~/.emacs:" ui_msg "(load \"${prefix}/share/emacs/site- lisp/${distname}/haskell-site-file\")" ui_msg "(add-hook 'haskell-mode-hook 'turn-on-haskell- doc-mode)" ui_msg "(add-hook 'haskell-mode-hook 'turn-on-haskell- indent)" ui_msg "(add-hook 'haskell-mode-hook 'font-lock-mode)" ui_msg "(add-hook 'haskell-mode-hook 'imenu-add-menubar- index)" ui_msg " " } } }}} I am not a portfile wizard, so maybe it can be done better. Also, it should be no problem at all to add a variant for emacs-app. -- Ticket URL: <http://trac.macports.org/ticket/19971> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #26818: New Port: git-flow-bash-completion
by MacPorts 31 Jul '14

31 Jul '14

#26818: New Port: git-flow-bash-completion --------------------------------------+------------------------------------- Reporter: jason-macports@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: git-flow-bash-completion --------------------------------------+------------------------------------- Bash (and Zsh) completion support for git-flow The contained completion routines provide support for completing: * git-flow init, feature, hotfix and release * feature, hotfix and release branches * remote feature branch names (for git-flow feature track) Project homepage: http://github.com/bobthecow/git-flow-completion NOTES: * ''For use with `git-flow`; see New Port ticket #26803.'' * ''provides `bash` completion only, no `zsh`'' * ''expects `git` >= 1.7.1 to avoid hand editing `/path/to/bash_completion.d/git`'' -- Ticket URL: <https://trac.macports.org/ticket/26818> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #27566: puppet violates mtree
by MacPorts 31 Jul '14

31 Jul '14

#27566: puppet violates mtree -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: nigel@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: puppet -------------------------------------+-------------------------------------- {{{ $ sudo port -u upgrade puppet ---> Fetching puppet ---> Attempting to fetch puppet-2.6.4.tar.gz from http://puppetlabs.com/downloads/puppet/ ---> Verifying checksum(s) for puppet ---> Extracting puppet ---> Configuring puppet ---> Building puppet ---> Staging puppet into destroot Warning: violation by /etc Warning: puppet violates the layout of the ports-filesystems! Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases! ---> Computing dependencies for puppet ---> Installing puppet @2.6.4_0 ---> Deactivating puppet @2.6.2_0 ---> Cleaning puppet ---> Activating puppet @2.6.4_0 ---> Cleaning puppet ---> Uninstalling puppet @2.6.2_0 ---> Cleaning puppet }}} -- Ticket URL: <https://trac.macports.org/ticket/27566> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #16504: Installation of hs-plugins fails
by MacPorts 30 Jul '14

30 Jul '14

#16504: Installation of hs-plugins fails ----------------------------+----------------------------------------------- Reporter: kazu(a)iij.ad.jp | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ----------------------------+----------------------------------------------- To install "yi", I typed "sudo port install ghc yi" then installation of hs-plugins failed. -- Ticket URL: <http://trac.macports.org/ticket/16504> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #15859: openjade 1.3.2, Revision 2: demo failure
by MacPorts 30 Jul '14

30 Jul '14

#15859: openjade 1.3.2, Revision 2: demo failure -----------------------------+---------------------------------------------- Reporter: tom.duck(a)dal.ca | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: openjade | -----------------------------+---------------------------------------------- Openjade has a demo program that can be used to test the installation. See http://olympus.het.brown.edu/cgi- bin/dwww?type=file&location=/usr/share/doc/openjade#using. Execution of the demo results in a bus error: {{{ $ openjade demo.sgm Bus error }}} This is on my 10.4 Tiger system with the updated openjade port. -- Ticket URL: <http://trac.macports.org/ticket/15859> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #16113: OpenSceneGraph should use MacPorts curl, not Mac OS X's
by MacPorts 28 Jul '14

28 Jul '14

#16113: OpenSceneGraph should use MacPorts curl, not Mac OS X's -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- Parts of OpenSceneGraph link with /usr/lib/libcurl.3.dylib. This should be changed so that it depends on libcurl as provided by MacPorts, and a dependency on port:curl should be added. -- Ticket URL: <http://trac.macports.org/ticket/16113> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3