February 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #17322: ddd still does not install under 10.5.4
by MacPorts 25 Oct '13

25 Oct '13

#17322: ddd still does not install under 10.5.4 -------------------------------+-------------------------------------------- Reporter: young_fish(a)gmx.de | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: -------------------------------+-------------------------------------------- Installation (sudo port install ddd) will freeze at ---> configure. I saw, that issue has been addressed by one user (ticket 16016, which is closed), but I have the same issue and am just wandering if the workaround is the only solution (launching an x11 window)? I'd rather use only the terminal window than the x11 terminal as I have it customized. It would be great to have all commands be able to be run in the terminal window. I understand that this is not high priority. So I am just wandering if there is an other solution to be suggested? I am running this on an Xserve. No ~/.ddd/ folder has yet been created, so I cannot attache any log file. Thanks Pelusa -- Ticket URL: <http://trac.macports.org/ticket/17322> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #17353: attempt to install gnutar seems to depend on gnutar already being installed
by MacPorts 24 Oct '13

24 Oct '13

#17353: attempt to install gnutar seems to depend on gnutar already being installed -----------------------------------+---------------------------------------- Reporter: rssolis@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gnutar | Port: -----------------------------------+---------------------------------------- Running MacOS X 10.4.11 on an *old* Powerbook. Attempt to install gnutar seems to fail due to dependency on gnutar already being installed. How do I get around this? See message below: My-PowerBook:/opt/local/bin$ sudo port install gnutar Password: ---> Extracting gettext Error: Target org.macports.extract returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gettext/work" && gzip -dc /opt/local/var/macports/distfiles/gettext/gettext-0.17.tar.gz | /usr/bin/gnutar --no-same-owner -xf - " returned error 127 Command output: sh: line 1: /usr/bin/gnutar: No such file or directory -- Ticket URL: <http://trac.macports.org/ticket/17353> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #26263: pngmeta: undefined symbols (doesn't build)
by MacPorts 23 Oct '13

23 Oct '13

#26263: pngmeta: undefined symbols (doesn't build) -----------------------------------+---------------------------------------- Reporter: macports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: pngmeta -----------------------------------+---------------------------------------- pngmeta fails to build: {{{ :info:build /usr/bin/gcc-4.2 -pipe -O2 -arch x86_64 -I/opt/local/include -I/opt/local/include -L/opt/local/lib -arch x86_64 -o pngmeta pngmeta.o -lpng -lz -L/opt/local/include -L/opt/local/include -lpng -L/opt/local/lib -lm -L/opt /local/lib:info:build Undefined symbols: :info:build "_png_handle_tIME", referenced from: :info:build _png_skip_till_end in pngmeta.o :info:build "_png_handle_tEXt", referenced from: :info:build _png_skip_till_end in pngmeta.o }}} (more undefined symbols follow, full build log attached) -- Ticket URL: <http://trac.macports.org/ticket/26263> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #17516: netpbm: parallel build fails
by MacPorts 15 Oct '13

15 Oct '13

#17516: netpbm: parallel build fails -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: mas@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.8.0 Keywords: | Port: netpbm -------------------------------------+-------------------------------------- With netpbm 10.26.58 and MacPorts trunk (@42849) on Mac OS X 10.4.11 Intel, the parallel build now fails: {{{ ---> Fetching netpbm ---> Verifying checksum(s) for netpbm ---> Extracting netpbm ---> Applying patches to netpbm ---> Configuring netpbm ---> Building netpbm Error: Target org.macports.build returned: shell command " cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58" && nice -n 10 gnumake -j2 messages=yes " returned error 2 Command output: rm -f nstring.h rm -f mallocvar.h ln -s /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/util/nstring.h nstring.h ln -s /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/util/mallocvar.h mallocvar.h gnumake -C /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/ -f /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/Makefile \ SRCDIR=/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58 BUILDDIR=/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58 libnetpbm.dylib gnumake -C /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/buildtools/ -f /mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/buildtools/Makefile \ SRCDIR=/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58 BUILDDIR=/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58 libopt /usr/bin/gcc-4.0 -c -I/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib -I. -DNDEBUG -I/mp/include -O3 -fno-common \ -o libpm.o libpm.c /usr/bin/gcc-4.0 -c -I/mp/include -O3 -o libopt.o \ -DSHLIBPREFIXLIST="\"lib\"" \ \ libopt.c In file included from pm.h:16, from libpm.c:42: pm_config.h:487: error: redefinition of typedef 'uint32n' pm_config.h:178: error: previous declaration of 'uint32n' was here pm_config.h:488: error: redefinition of typedef 'int32n' pm_config.h:179: error: previous declaration of 'int32n' was here In file included from pm.h:16, from libpm.c:42: pm_config.h:623: error: redefinition of typedef 'pm_filepos' pm_config.h:314: error: previous declaration of 'pm_filepos' was here gnumake[3]: *** [libpm.o] Error 1 gnumake[2]: *** [/mp/var/macports/build/_Users_rschmidt_macports_dports_graphics_netpbm/work/netpbm-10.26.58/lib/libnetpbm.dylib] Error 2 gnumake[2]: *** Waiting for unfinished jobs.... /usr/bin/gcc-4.0 -o libopt -L/mp/lib libopt.o gnumake[1]: *** [pgm/all] Error 2 gnumake: *** [converter/all] Error 2 Error: Unable to upgrade port: 1 }}} It succeeds if I turn off the parallel build. -- Ticket URL: <http://trac.macports.org/ticket/17516> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 10

[MacPorts] #26890: texlive-fonts-recommended @13822_1+doc : Missing map entries
by MacPorts 12 Oct '13

12 Oct '13

#26890: texlive-fonts-recommended @13822_1+doc : Missing map entries --------------------------------+------------------------------------------- Reporter: etphipp@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: texlive | Port: texlive-fonts-recommended --------------------------------+------------------------------------------- While trying to use the palatino fonts from texlive-fonts-recommended, I discovered that the corresponding map entry (upl.map) in /opt/local/etc/texmf/updmap.d/10texlive-fonts-recommended.cfg is missing. This causes pdftex or dvips to fail if these fonts are used with an error along the lines of: {{{ kpathsea: Running mktexpk --mfmode ljfour --bdpi 8000 --mag 1+4800/(2*4000) --dpi 12800 uplb8r mktexpk: don't know how to create bitmap font for uplb8r. }}} Adding "Map upl.map" to this file, running "sudo /opt/local/libexec /texlive-update-cnf updmap.cfg" followed by "sudo updmap-sys" fixed the problem. I assume this file is generated from the contents of the Portfile, and it could be fixed by adding the corresponding line there? Looking at the contents of this port, it appears there may be many more map entries missing, although I haven't tried to use those fonts. -- Ticket URL: <https://trac.macports.org/ticket/26890> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 13

[MacPorts] #16312: py25-wxpython causes an error message in the Python interactive interpreter help().
by MacPorts 10 Oct '13

10 Oct '13

#16312: py25-wxpython causes an error message in the Python interactive interpreter help(). --------------------------------------------+------------------------------- Reporter: paidhi(a)mospheira.net | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: python wxwidgets wxpython py25 | --------------------------------------------+------------------------------- After installing py25-wxpython trying to show all available modules in the Python interpreter fails with an error message. Here is how to reproduce it: {{{ $ python Python 2.5.2 (r252:60911, Aug 8 2008, 22:25:12) [GCC 4.0.1 (Apple Inc. build 5484)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> help() Welcome to Python 2.5! This is the online help utility. If this is your first time using Python, you should definitely check out the tutorial on the Internet at http://www.python.org/doc/tut/. Enter the name of any module, keyword, or topic to get help on writing Python programs and using Python modules. To quit this help utility and return to the interpreter, just type "quit". To get a list of available modules, keywords, or topics, type "modules", "keywords", or "topics". Each module also comes with a one-line summary of what it does; to list the modules whose summaries contain a given word such as "spam", type "modules spam". help> modules Please wait a moment while I gather a list of all available modules... Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site.py", line 346, in __call__ return pydoc.help(*args, **kwds) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/pydoc.py", line 1648, in __call__ self.interact() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/pydoc.py", line 1666, in interact self.help(request) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/pydoc.py", line 1682, in help elif request == 'modules': self.listmodules() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/pydoc.py", line 1803, in listmodules ModuleScanner().run(callback) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/pydoc.py", line 1854, in run for importer, modname, ispkg in pkgutil.walk_packages(): File "/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/pkgutil.py", line 110, in walk_packages __import__(name) File "/opt/local/lib/python2.5/site-packages/wxaddons/__init__.py", line 29, in <module> config = wx.Config("wxaddons") File "/opt/local/lib/python2.5/site-packages/wx-2.8-mac- unicode/wx/_misc.py", line 3298, in __init__ _misc_.Config_swiginit(self,_misc_.new_Config(*args, **kwargs)) wx._core.PyNoAppError: The wx.App object must be created first! >>> }}} My environment: MacOS 10.5.4 {{{ $ port version Version: 1.600 $ port installed |grep wx py25-wxpython @2.8.8.1_0 (active) wxWidgets @2.8.8_0 (active) }}} After uninstalling py25-wxpython it works. Thanks for any help, [[BR]] -Markus- -- Ticket URL: <http://trac.macports.org/ticket/16312> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #26753: aui support missing from wxwidgets-devel
by MacPorts 07 Oct '13

07 Oct '13

#26753: aui support missing from wxwidgets-devel --------------------------------+------------------------------------------- Reporter: firetear@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: wxwidgets aui | Port: wxwidgets-devel --------------------------------+------------------------------------------- I tried installing dolphin, which has wxwidgets as a dependency. When building dolphin from svn I get this error: http://pastebin.com/6ARPJu30 the googlecode instructions for installing dolphin are listed here: http://code.google.com/p/dolphin-emu/wiki/MacOSX_Build I'm requesting an enhancement that wxwidgets be configured to support aui and whatever else dolphin needs, if not in the default install, then at least in a variant. -- Ticket URL: <https://trac.macports.org/ticket/26753> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #28494: kdelibs4 @4.6.0 +kdesdk4 on Tiger 10.4.11 PPC proxymodeltest Declaration errors - Build failure
by MacPorts 04 Oct '13

04 Oct '13

#28494: kdelibs4 @4.6.0 +kdesdk4 on Tiger 10.4.11 PPC proxymodeltest Declaration errors - Build failure --------------------------------+------------------------------------------- Reporter: afisynte@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: tiger, powerpc | Port: kdelibs4 --------------------------------+------------------------------------------- This error is encountered when "sudo port install kdesdk4" gets to kdelibs4. -- Ticket URL: <https://trac.macports.org/ticket/28494> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #23632: kde4-ANY Crippled sound without QuickTime addons
by MacPorts 04 Oct '13

04 Oct '13

#23632: kde4-ANY Crippled sound without QuickTime addons ----------------------------------+----------------------------------------- Reporter: dtsimon@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: kde4, qt-mac, phonon | Port: ----------------------------------+----------------------------------------- The KDE4 ports depend on Qt's phonon sound system, which in turn depends on the native QuickTime system. As it states at http://mac.kde.org/?id=download , if QuickTime can't play it, phonon can't play it. The solution is to install the Xiph (ogg) QuickTime component (http://www.xiph.org/quicktime/) to allow QuickTime to play ogg files. Installing Perian (http://perian.org/) wouldn't hurt, either. There should be a note during the port install process saying that this step is necessary since much of KDE's audio is in ogg format. Would it be possible to force or automate installation of these QuickTime addons through the port install process? -- Ticket URL: <http://trac.macports.org/ticket/23632> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #20844: parmetis-3.1.1
by MacPorts 01 Oct '13

01 Oct '13

#20844: parmetis-3.1.1 -------------------------------+-------------------------------------------- Reporter: a.zilian@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: parmetis -------------------------------+-------------------------------------------- initial version of a parmetis port. needs patchfile for make phase. no installation functionality yet. -- Ticket URL: <http://trac.macports.org/ticket/20844> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3