May 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #29402: Request GMTL portfile update
by MacPorts 09 May '11

09 May '11

#29402: Request GMTL portfile update -------------------------------------+-------------------------------------- Reporter: IgnitusBoyone@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: -------------------------------------+-------------------------------------- I found the gmtl port file to be 23 months stale. The original maintainer was from Iowa State and I would assume a graduate student no longer associated with them. I had to update it to 6.1 for my own system. I was hopping I could push the update upstream. {{{ PortSystem 1.0 name gmtl version 0.6.1 categories math platforms darwin maintainers iastate.edu:mccdo description a lightweight math library long_description The math library used by vrjuggler. It is \ implemented with c++ templates. homepage http://ggt.sourceforge.net/ master_sites sourceforge:ggt checksums md5 1391af2c5ea050dda7735855ea5bb4c1 depends_build port:scons use_configure no build.cmd scons build.target destroot.cmd scons destroot.destdir prefix=${destroot}${prefix} destroot.target install }}} -- Ticket URL: <https://trac.macports.org/ticket/29402> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #24421: python dies using multiprocessing/urllib2 from mac ports, but works with stock python
by MacPorts 09 May '11

09 May '11

#24421: python dies using multiprocessing/urllib2 from mac ports, but works with stock python ----------------------------------------------------+----------------------- Reporter: vkuznet@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: python crash, urllib2, multiprocessing | Port: ----------------------------------------------------+----------------------- Hi, I observed very tricky problem. I have application written in python which uses multiprocessing module. So using the python 2.6 from macports cause python die in a thread when urllib2 module is invoked. To test I installed stock python 2.6.5 from python.org and everything works. I also verify that the problem lies with urllib2/multiprocessing modules, since if I replace urllib2 to httplib, everything works too. I attach apple traceback which shows the problem. My guess that macports uses either special patch or enable flags which didn't come with stock python source and that cause a problem. Valentin. -- Ticket URL: <http://trac.macports.org/ticket/24421> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 13

[MacPorts] #24407: Error installing R (2.10.1)
by MacPorts 09 May '11

09 May '11

#24407: Error installing R (2.10.1) --------------------------------+------------------------------------------- Reporter: macports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: R --------------------------------+------------------------------------------- installing the R port gives the following error: {{{ building/updating package metadata ... writing package indices begin installing recommended package cluster begin installing recommended package boot Warning: invalid package 'boot.tgz' Error: ERROR: no packages specified Warning: invalid package 'cluster.tgz' Error: ERROR: no packages specified make[2]: *** [boot.ts] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: *** [cluster.ts] Error 1 make[1]: *** [recommended-packages] Error 2 make: *** [stamp-recommended] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_R/work/R-2.10.1" && /usr/bin/make -j2 all " returned error 2 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_R/work/R-2.10.1" && /usr/bin/make -j2 all " returned error 2 while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" }}} See also attached logfile. -- Ticket URL: <http://trac.macports.org/ticket/24407> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #29395: py27-pyx
by MacPorts 09 May '11

09 May '11

#29395: py27-pyx --------------------------------------------------+------------------------- Reporter: christophe.prudhomme@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: py27 pyx | Port: --------------------------------------------------+------------------------- hello py27-pyx is missing as an available port here it is -- Ticket URL: <https://trac.macports.org/ticket/29395> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #23333: asterisk needs to use configure.cc
by MacPorts 09 May '11

09 May '11

#23333: asterisk needs to use configure.cc -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: asterisk -------------------------------------+-------------------------------------- asterisk is not ensuring it is UsingTheRightCompiler: {{{ DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_Users_rschmidt_macports_dports_net_asterisk/work/asterisk-1.6.1.12" && /usr/bin/nice -n 10 /usr/bin/make -j2 all' CC="cc" CXX="/usr/bin/g++-4.2" LD="" AR="" RANLIB="" CFLAGS="" /usr/bin/make -C menuselect CONFIGURE_SILENT="--silent" makeopts configure: error: C compiler cannot create executables See `config.log' for more details. make[1]: *** [makeopts] Error 77 }}} And from menuselect/config.log: {{{ configure:1903: checking for gcc configure:1919: found /Users/rschmidt/macports/ryandesign/no_default_gcc/gcc configure:1930: result: gcc configure:2168: checking for C compiler version configure:2175: gcc --version >&5 gcc --version gcc: Error: You should be using ${configure.cc} See http://trac.macports.org/wiki/UsingTheRightCompiler }}} -- Ticket URL: <http://trac.macports.org/ticket/23333> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #29397: gnutls fails to compile on snow leopard
by MacPorts 09 May '11

09 May '11

#29397: gnutls fails to compile on snow leopard --------------------------------+------------------------------------------- Reporter: vloodo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: --------------------------------+------------------------------------------- I cannot install gnutls on my system. Compilation fails. Here is the tail of the log file that's generated {{{ :info:build "_gcry_mpi_release", referenced from: :info:build _wrap_gcry_mpi_release in mpi-libgcrypt.o :info:build _wrap_gcry_generate_group in mpi-libgcrypt.o :info:build _wrap_gcry_generate_group in mpi-libgcrypt.o :info:build _wrap_gcry_generate_group in mpi-libgcrypt.o:info:build ld: symbol(s) not found:info:build collect2: ld returned 1 exit status :info:build lipo: can't open input file: /var/tmp//ccLSpjqa.out (No such file or directory) :info:build make[4]: *** [libgnutls.la] Error 1 :info:build make[3]: *** [all-recursive] Error 1 :info:build make[2]: *** [all] Error 2 :info:build make[1]: *** [all-recursive] Error 1 :info:build make: *** [all] Error 2 :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macp orts_sources_rsync.macports.org_release_ports_devel_gnutls/work/gnutls-2.8.6" && /usr/bin/make -j2 all " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log fo r details):debug:build Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for gnutls): org.macports.activate org.macports.build org.macports.destroot org.macports.install :error:build Failed to install gnutls :notice:build Log for gnutls is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gnutls/main.log (END) }}} -- Ticket URL: <https://trac.macports.org/ticket/29397> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #24391: Asterisk 1.6.1.12: build failure: Undefined symbols: ___sync_fetch_and_add_4
by MacPorts 09 May '11

09 May '11

#24391: Asterisk 1.6.1.12: build failure: Undefined symbols: ___sync_fetch_and_add_4 ----------------------------------------------------------------+----------- Reporter: reg@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: Asterisk ___sync_fetch_and_add_4 Undefined symbols | Port: Asterisk ----------------------------------------------------------------+----------- The Asterisk ports fails to build. The problem reported is: Undefined symbols: ___sync_fetch_and_add_4 This happened while linking: [LD] refcounter.o md5.o hashtab.o utils.o sha1.o strcompat.o threadstorage.o clicompat.o poll.o -> refcounter This happened on a first gen. MacBook (Core Duo) with Snow Leopard 10.6.3, XCode 3.2.1 The Macports install was a clean install and only Asterisk (with dependencies) was attempted to build. The Dependencies seemed to build fine only Asterisk itself keeps failing no matter what I do. -- Ticket URL: <http://trac.macports.org/ticket/24391> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #29399: Port
by MacPorts 09 May '11

09 May '11

#29399: Port --------------------------------------+------------------------------------- Reporter: lachapelle79@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: --------------------------------------+------------------------------------- Error: Port db45 not found. I got this error i am trying to install xastir, When i : sudo port install db45. -- Ticket URL: <https://trac.macports.org/ticket/29399> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #29400: Festival
by MacPorts 08 May '11

08 May '11

#29400: Festival --------------------------------------+------------------------------------- Reporter: lachapelle79@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: --------------------------------------+------------------------------------- Please Add festival to Ports . It is a speech engine we use in xastir -- Ticket URL: <https://trac.macports.org/ticket/29400> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

[MacPorts] #26001: [UPDATE] wordpress 3.0.1
by MacPorts 08 May '11

08 May '11

#26001: [UPDATE] wordpress 3.0.1 ------------------------------+--------------------------------------------- Reporter: jul_bsd@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: wordpress ------------------------------+--------------------------------------------- update with more notes on activation to finish setup. Please note current port release (2.8.4) is not (easily?) usable now as it seems incompatible with Mysql5 new authentication scheme ... -- Ticket URL: <http://trac.macports.org/ticket/26001> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5