June 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #29910: XV checksums don't match
by MacPorts 23 Jun '11

23 Jun '11

#29910: XV checksums don't match --------------------------------+------------------------------------------- Reporter: sribeiro@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: xv --------------------------------+------------------------------------------- $ tail -f /opt/local/var/macports/logs/_opt_mports_trunk_dports_graphics_xv/xv/main.log :info:checksum checksums xv-3.10a.tar.gz \ md5 6dca521372685ff89e1e49dc9089ceca \ xv-3.10a-jumbo-patches-20070520.tar.gz \ md5 9fb2d0ec320498105cafeba38a588472 :error:checksum Target org.macports.checksum returned: Unable to verify file checksums :debug:checksum Backtrace: Unable to verify file checksums while executing "$procedure $targetname" :info:checksum Warning: the following items did not execute (for xv): org.macports.activate org.macports.checksum org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:checksum Log for xv is at: /opt/local/var/macports/logs/_opt_mports_trunk_dports_graphics_xv/xv/main.log -- Ticket URL: <https://trac.macports.org/ticket/29910> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #29900: Error: Failed to install jpeg
by MacPorts 23 Jun '11

23 Jun '11

#29900: Error: Failed to install jpeg ------------------------------------+--------------------------------------- Reporter: Kelly.Morgen@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: ------------------------------------+--------------------------------------- I'm a totally newbie here, just trying to install Wine on my Mac OSX version 10.5.8. Everything was installing fine, until I hit the following: kelly-morgens-macbook-pro:~ kellymorgen$ sudo port install wine Password: ---> Computing dependencies for wine ---> Dependencies to be installed: jpeg lcms tiff libpng libxml2 libxslt mesa makedepend xorg-xproto py27-libxml2 python27 bzip2 db46 gdbm openssl python_select sqlite3 tcl xorg-dri2proto xorg-glproto xorg-libXfixes xorg- fixesproto xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-libXdmcp xorg-libxcb xorg-libpthread-stubs xorg-xcb-proto xorg-util-macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans xorg-libXi xorg-libXext xorg-libXmu xorg-libXt xorg-libsm xorg-libice xorg-libXcomposite xorg-compositeproto xorg-libXcursor xorg- renderproto xrender xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto xorg-libXxf86vm xorg-xf86vidmodeproto ---> Activating jpeg @8c_0+universal Error: Target org.macports.activate returned: Image error: /opt/local/bin/cjpeg already exists and does not belong to a registered port. Unable to activate port jpeg. Use 'port -f activate jpeg' to force the activation. Error: Failed to install jpeg Log for jpeg is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_jpeg/main.log Error: The following dependencies were not installed: jpeg lcms tiff libpng libxml2 libxslt mesa makedepend xorg-xproto py27-libxml2 python27 bzip2 db46 gdbm openssl python_select sqlite3 tcl xorg-dri2proto xorg- glproto xorg-libXfixes xorg-fixesproto xorg-libX11 xorg-bigreqsproto xorg- inputproto xorg-kbproto xorg-libXau xorg-libXdmcp xorg-libxcb xorg- libpthread-stubs xorg-xcb-proto xorg-util-macros xorg-xcmiscproto xorg- xextproto xorg-xf86bigfontproto xorg-xtrans xorg-libXi xorg-libXext xorg- libXmu xorg-libXt xorg-libsm xorg-libice xorg-libXcomposite xorg- compositeproto xorg-libXcursor xorg-renderproto xrender xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto xorg-libXxf86vm xorg- xf86vidmodeproto Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> I have no idea what to do next... I think I accidentally installed the jpeg earlier... can you tell me how to delete it so it can be reinstalled in Wine? Or whatever I need to do? thanks so much. -- Ticket URL: <https://trac.macports.org/ticket/29900> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #26696: nginx: update to 0.7.67
by MacPorts 23 Jun '11

23 Jun '11

#26696: nginx: update to 0.7.67 -----------------------------------+---------------------------------------- Reporter: smparkes@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: nginx -----------------------------------+---------------------------------------- nginx should probably be updated to 0.7.67. -- Ticket URL: <https://trac.macports.org/ticket/26696> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #29908: Errors when trying to install apache2 - PLS HELP
by MacPorts 22 Jun '11

22 Jun '11

#29908: Errors when trying to install apache2 - PLS HELP --------------------------------------+------------------------------------- Reporter: matthewcaruana@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: --------------------------------------+------------------------------------- Hi, I'm trying to install apache2 using the following command: sudo port install apache2 Here are the error messages I'm getting: port -f activate expat Error: Insufficient privileges to write to MacPorts install prefix. Matthew-Caruanas-MacBook-Pro:~ matthewcaruana$ sudo port install apache2 Password: ---> Computing dependencies for apache2 ---> Dependencies to be installed: apr-util expat libiconv gperf sqlite3 ncurses ncursesw readline openssl zlib pcre bzip2 perl5 perl5.12 ---> Activating expat @2.0.1_1 Error: Target org.macports.activate returned: Image error: /opt/local/bin/xmlwf already exists and does not belong to a registered port. Unable to activate port expat. Use 'port -f activate expat' to force the activation. Error: Failed to install expat Log for expat is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_expat/main.log Error: The following dependencies were not installed: apr-util expat libiconv gperf sqlite3 ncurses ncursesw readline openssl zlib pcre bzip2 perl5 perl5.12 Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> Please find the error log file attached to this ticket. Seeing that the command 'port -f activate expat' was recommended, I tried running that. And it gives me the following error: port -f activate expat Error: Insufficient privileges to write to MacPorts install prefix. Could you please help me with this problem? Thanks, Matthew C. -- Ticket URL: <https://trac.macports.org/ticket/29908> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #29904: Error installing +universal variant of ICU port in SnowLeopard
by MacPorts 22 Jun '11

22 Jun '11

#29904: Error installing +universal variant of ICU port in SnowLeopard ------------------------------------+--------------------------------------- Reporter: kasty.jose@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: icu universal macports | Port: icu ------------------------------------+--------------------------------------- The following alternatives work ok: {{{ > sudo port install icu > sudo port install icu +x86_64 (however it builds i386 binaries instead of x86_64) > sudo port install icu +i386 }}} The following alternative does not work (+universal = i386 x86_64): {{{ > sudo port install icu +universal ---> Configuring icu ---> Configuring icu for architecture x86_64 export CPP= CC=/usr/bin/gcc-4.2 CXX=/usr/bin/g++-4.2 CPPFLAGS= CFLAGS=-pipe -O2 -arch x86_64 -O2 CXXFLAGS=-pipe -O2 -arch x86_64 -O2 LDFLAGS=-arch x86_64 MAKE= Running ./configure --prefix=/opt/local --mandir=/opt/local/share/man --enable-static --disable-samples for MacOS X (Darwin) using the GNU C++ compiler checking for ICU version numbers... release 4.6.1, library 46.1, unicode version 6.0 checking build system type... i386-apple-darwin10.2.0 checking host system type... i386-apple-darwin10.2.0 checking target system type... i386-apple-darwin10.2.0 checking whether to build debug libraries... no checking whether to build release libraries... yes checking for gcc... /usr/bin/gcc-4.2 checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... configure: error: in `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_icu/work/icu /source-x86_64': configure: error: cannot run C compiled programs. If you meant to cross compile, use `--host'. See `config.log' for more details ./runConfigureICU: ./configure failed shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_icu/work/icu /source-x86_64" && ./runConfigureICU MacOSX --prefix=/opt/local --mandir=/opt/local/share/man --enable-static --disable-samples " returned error 1 Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Warning: the following items did not execute (for icu): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Log for icu is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_icu/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} -- Ticket URL: <https://trac.macports.org/ticket/29904> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #29878: eigen3 @3.0.1_0 Install does not touch signature_of_eigen3_matrix_library
by MacPorts 22 Jun '11

22 Jun '11

#29878: eigen3 @3.0.1_0 Install does not touch signature_of_eigen3_matrix_library -----------------------------------+---------------------------------------- Reporter: freddie@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: eigen3 -----------------------------------+---------------------------------------- When installing eigen3 through MacPorts the file `signature_of_eigen3_matrix_library` is not touched in /opt/local/include/eigen3/. This file is used by FindEigen3.cmake to locate the install directory of Eigen 3. Without the presence of this file any applications or projects which depend on this behavior will fail to build. -- Ticket URL: <https://trac.macports.org/ticket/29878> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #25359: openjpeg build fails when libtool port is active
by MacPorts 22 Jun '11

22 Jun '11

#25359: openjpeg build fails when libtool port is active --------------------------------------+------------------------------------- Reporter: lkraider+ports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: openjpeg --------------------------------------+------------------------------------- openjpeg Makefile uses the '-o' option for libtool without setting a mode, which only works with the system provided libtool, not with the port installed one (see attached log). I bumped into this when trying to install py26-ipython on Snow Leopard, with a fresh install of MacPorts 1.9.1 and the build failed on the openjpeg port. Workaround was to deactivate libtool port, install openjpeg, and resume installing ipython. -- Ticket URL: <http://trac.macports.org/ticket/25359> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #25333: arm-elf-gcc3 3.4.6 Build problem
by MacPorts 22 Jun '11

22 Jun '11

#25333: arm-elf-gcc3 3.4.6 Build problem ---------------------------------+------------------------------------------ Reporter: rob@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.0 Keywords: | Port: arm-elf-gcc3 ---------------------------------+------------------------------------------ Got gcc-3.4.6.tar.bz2 from somewhere (probably http://ftp.gnu.org/gnu/gcc/gcc-3.4.6/) and put it in ... /opt/local/car/macports/dist/gcc (because of ticket #25332). Built using sudo port install arm-elf-gcc3 {{{ Error: Target org.macports.build returned: shell command failed Log for arm-elf-gcc3 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_cross_arm-elf-gcc3/main.log }}} Inside the log: {{{ <<<snip>>> :info:build cc -no-cpp-precomp -pipe -O2 -arch x86_64 -DIN_GCC -DCROSS_COMPILE -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing- prototypes -pedantic -Wno-long-long -DHAVE_CONFIG_H -I. -I. -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_cross_arm-elf-gcc3/work/gcc-3.4.6/gcc -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_cross_arm-elf-gcc3/work/gcc-3.4.6/gcc/. -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_cross_arm-elf-gcc3/work/gcc-3.4.6/gcc/../include -I../intl -c insn-recog.c \ :info:build -o insn-recog.o :info:build cc -no-cpp-precomp -pipe -O2 -arch x86_64 -DIN_GCC -DCROSS_COMPILE -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing- prototypes -pedantic -Wno-long-long -DHAVE_CONFIG_H -o Tcollect2 \ :info:build collect2.o tlink.o intl.o version.o ../libiberty/libiberty.a -L/usr/lib ../intl/libintl.a -L/opt/local/lib -liconv :info:build Undefined symbols: :info:build "_libiconv_open", referenced from: :info:build __nl_init_domain_conv in libintl.a(loadmsgcat.o) :info:build __nl_init_domain_conv in libintl.a(loadmsgcat.o) :info:build "_libiconv_close", referenced from: :info:build __nl_free_domain_conv in libintl.a(loadmsgcat.o) :info:build "_libiconv", referenced from: :info:build __nl_find_msg in libintl.a(dcigettext.o) :info:build (maybe you meant: _libiconv_set_relocation_prefix) :info:build ld: symbol(s) not found :info:build collect2: ld returned 1 exit status :info:build make[1]: *** [collect2] Error 1 :info:build make[1]: *** Waiting for unfinished jobs.... :info:build make: *** [all-gcc] Error 2 :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_cross_arm-elf-gcc3/work/build" && /usr/bin/make -j4 all AR_FOR_TARGET=arm-elf-ar AS_FOR_TARGET=arm-elf-as LD_FOR_TARGET=arm-elf-ld NM_FOR_TARGET=arm-elf-nm RANLIB_FOR_TARGET=arm-elf-ranlib " returned error 2 <<<snip>>> }}} My system: Mac OS X 10.6.3 (Snow Leopard), x86. MacPorts 1.9.0. i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5659) (Comment from Ryan Schmidt: I'm unclear why a libintl.a is being used here; I would have expected libintl.dylib to have been used via "-lintl".) -- Ticket URL: <http://trac.macports.org/ticket/25333> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #29902: xterm upgrade fails
by MacPorts 22 Jun '11

22 Jun '11

#29902: xterm upgrade fails ------------------------------------+--------------------------------------- Reporter: brunner.adam@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: ------------------------------------+--------------------------------------- When I try to update the outdated ports, I got the following error with xterm: {{{ $ sudo port upgrade outdated ---> Computing dependencies for xterm ---> Fetching xterm ---> Attempting to fetch xterm-270.tgz from http://lil.fr.distfiles.macports.org/xterm ---> Attempting to fetch xterm-270.tgz from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xterm ---> Attempting to fetch xterm-270.tgz from http://distfiles.macports.org/xterm ---> Attempting to fetch xterm-270.tgz from http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xterm ---> Attempting to fetch xterm-270.tgz from ftp://invisible- island.net/xterm/ ---> Attempting to fetch xterm-270.tgz from http://sea.us.distfiles.macports.org/macports/mpdistfiles/xterm ---> Attempting to fetch xterm-270.tgz from http://svn.macports.org/repository/macports/distfiles/xterm Error: Target org.macports.fetch returned: fetch failed Log for xterm is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xterm/main.log Error: Unable to upgrade port: 1 To report a bug, see <http://guide.macports.org/#project.tickets> }}} -- Ticket URL: <https://trac.macports.org/ticket/29902> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #29819: python version independence? possible?
by MacPorts 22 Jun '11

22 Jun '11

#29819: python version independence? possible? ---------------------------------+------------------------------------------ Reporter: jowens@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: googlecl ---------------------------------+------------------------------------------ I'm moving from python26 to python27 and am noting the packages that are hardcoded to python26 (googlecl, offlineimap, mercurial). Is it possible to make these packages dependent on a generic python? None of them seem to rely on too many python-version-specific features (gdata is ported to multiple python ports). -- Ticket URL: <https://trac.macports.org/ticket/29819> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3