June 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #29683: Failed downloads still marked as completed
by MacPorts 02 Jun '11

02 Jun '11

#29683: Failed downloads still marked as completed ---------------------------------------+------------------------------------ Reporter: joe@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: ---------------------------------------+------------------------------------ When macports fails to download a file correctly (but does receive something, eg an html file due to a misconfigured proxy), the download is still marked as completed and does not get re-attempted, see log section: ---> Dependencies to be installed: py27-distribute py27-numpy atlas gcc44 gcc_select gzip fftw-3 py27-nose DEBUG: Starting logging for py27-distribute DEBUG: Executing org.macports.main (py27-distribute) DEBUG: Skipping completed org.macports.fetch (py27-distribute) ---> Verifying checksum(s) for py27-distribute DEBUG: checksum phase started at Thu Jun 2 09:31:26 BST 2011 DEBUG: Executing org.macports.checksum (py27-distribute) ---> Checksumming distribute-0.6.18.tar.gz Error: Checksum (md5) mismatch for distribute-0.6.18.tar.gz Portfile checksum: distribute-0.6.18.tar.gz md5 9c9d7489136fe8b57950dd827c979fff Distfile checksum: distribute-0.6.18.tar.gz md5 e5bc1e56c435da931fc3121aaa130397 Because of this, subsequent attempts to install this file assume the download has already completed and skip direct to the checksum phase which will obviously fail. Similarly deleting the file still assumes the download is successful, so the checksum phase again fails this time because the file is not present at all. The download *should* never be considered as completed until the checksum has been verified! If a download fails, subsequent installation attempts should delete the corrupted file and try again to download (allowing the user to correct the problem in between). There is no obvious way to force a redownload of the file. -- Ticket URL: <https://trac.macports.org/ticket/29683> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #26173: Update gnupg2 to version 2.0.16, with the 2010-07-23 security update
by MacPorts 02 Jun '11

02 Jun '11

#26173: Update gnupg2 to version 2.0.16, with the 2010-07-23 security update ----------------------------------+----------------------------------------- Reporter: swordangel@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: version security | Port: gnupg2 ----------------------------------+----------------------------------------- Version 2.0.13 contains the realloc bug in GPGSM that is not fixed until version 2.0.16 with the 2010-07-23 patch. -- Ticket URL: <http://trac.macports.org/ticket/26173> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #26838: new portfile: py26-atpy
by MacPorts 02 Jun '11

02 Jun '11

#26838: new portfile: py26-atpy ---------------------------------------+------------------------------------ Reporter: marshall.perrin@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: py26-atpy ---------------------------------------+------------------------------------ This portfile allows installation of the atpy python package. -- Ticket URL: <https://trac.macports.org/ticket/26838> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #26837: new portfile: py26-aplpy
by MacPorts 02 Jun '11

02 Jun '11

#26837: new portfile: py26-aplpy ---------------------------------------+------------------------------------ Reporter: marshall.perrin@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: py26-aplpy ---------------------------------------+------------------------------------ This portfile allows installation of the aplpy python package. -- Ticket URL: <https://trac.macports.org/ticket/26837> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #26836: new portfile: py26-pywcs
by MacPorts 02 Jun '11

02 Jun '11

#26836: new portfile: py26-pywcs ---------------------------------------+------------------------------------ Reporter: marshall.perrin@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: ---------------------------------------+------------------------------------ This portfile allows installation of the pywcs python package. -- Ticket URL: <https://trac.macports.org/ticket/26836> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #26840: new portfile: py26-asciitable
by MacPorts 02 Jun '11

02 Jun '11

#26840: new portfile: py26-asciitable ---------------------------------------+------------------------------------ Reporter: marshall.perrin@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: py26-asciitable ---------------------------------------+------------------------------------ This portfile supports the asciitable python package. -- Ticket URL: <https://trac.macports.org/ticket/26840> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #29658: phpstylist should use MacPorts PHP
by MacPorts 02 Jun '11

02 Jun '11

#29658: phpstylist should use MacPorts PHP ----------------------------------+----------------------------------------- Reporter: face@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: phpstylist ----------------------------------+----------------------------------------- phpstylist uses the Mac OS X version of PHP The patch file (see Revision 79013, 314 bytes (checked in by ryandesign@…, 30 hours ago) adds {{{#!/usr/bin/php}}} [[BR]] to the code. Wouldn't it be more in keeping with MacPorts to make that {{{#!/usr/bin/env php}}} -- Ticket URL: <https://trac.macports.org/ticket/29658> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #29443: graphviz @2.28.0 build error
by MacPorts 02 Jun '11

02 Jun '11

#29443: graphviz @2.28.0 build error -------------------------------+-------------------------------------------- Reporter: jjstickel@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: graphviz -------------------------------+-------------------------------------------- The latest graphviz is giving an error during the build phase. The relevant part of the log (attached) is {{{ :info:build qmake-qt3 -o qMakefile gvedit.pro :info:build cp ../../doc/infosrc/attrs attrs.txt :info:build rm -f moc_csettings.cpp moc_imageviewer.cpp moc_mainwindow.cpp moc_mdichild.cpp qrc_mdi.cpp # don't use distributed mocables poss from diff version of Qt :info:build /usr/bin/make -f qMakefile prefix=/opt/local exec_prefix=/opt/local mocables compiler_rcc_make_all :info:build ( cd /src/moc && /usr/bin/make ) :info:build make[5]: *** No rule to make target `compiler_rcc_make_all'. Stop. :info:build make[5]: *** Waiting for unfinished jobs.... :info:build /bin/sh: line 0: cd: /src/moc: No such file or directory :info:build make[5]: *** [/bin/moc] Error 1 :info:build make[4]: *** [mocables] Error 2 :info:build make[4]: *** Waiting for unfinished jobs.... :info:build make[3]: *** [all-recursive] Error 1 :info:build make[2]: *** [all-recursive] Error 1 :info:build make[1]: *** [all-recursive] Error 1 :info:build make: *** [all] Error 2 }}} -- Ticket URL: <https://trac.macports.org/ticket/29443> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

Re: [MacPorts] #13640: qt4-mac conflicts with qt3 on /opt/local/bin/lrelease
by MacPorts 02 Jun '11

02 Jun '11

#13640: qt4-mac conflicts with qt3 on /opt/local/bin/lrelease ---------------------------------+------------------------------------------ Reporter: vinc17@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: Qt tools; select | Port: qt3 qt4-mac ---------------------------------+------------------------------------------ Comment(by ryandesign@…): The ports have been marked as conflicting with one another in r79107 / r79113. -- Ticket URL: <https://trac.macports.org/ticket/13640#comment:23> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

Re: [MacPorts] #14873: qt3-mac's qmake causes qt3 not to build
by MacPorts 02 Jun '11

02 Jun '11

#14873: qt3-mac's qmake causes qt3 not to build --------------------------------+------------------------------------------- Reporter: schwern@… | Owner: blair@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Resolution: fixed | Keywords: Port: qt3 qt3-mac | --------------------------------+------------------------------------------- Changes (by ryandesign@…): * cc: ryandesign@… (added) * status: new => closed * resolution: => fixed Comment: "Fixed" in r79111 / r79112 by preventing qt3 from attempting to build if qt3-mac is active, and telling the user what to do about it. -- Ticket URL: <https://trac.macports.org/ticket/14873#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0