September 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #17155: avr-gdb-6.71 broken / fails to read symbols from elf files
by MacPorts 21 Nov '13

21 Nov '13

#17155: avr-gdb-6.71 broken / fails to read symbols from elf files --------------------------------------------+------------------------------- Reporter: moritz.fischer(a)student.kit.edu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: elf32-avr, symbols, elf, bfd | Port: avr-gdb --------------------------------------------+------------------------------- Although it seems to build perfectly ok, avr-gdb is not able to read debugging symbols from elf files. I tried switching to gdb-6.8 with the same effect. I found out that if built by hand with same ./configure parameters it works just fine, but using the port somehow elfread.o doesn't get linked in. Somehow the configure scripts seem to fail. The Problem is afaik related to bfd's elf support: "checking for ELF support in BFD... no" if compiled by port, whereas ELF support is detected when build by hand. -- Ticket URL: <http://trac.macports.org/ticket/17155> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #24685: libgdk-x11/libgdk-x11 crashes on drag
by MacPorts 18 Nov '13

18 Nov '13

#24685: libgdk-x11/libgdk-x11 crashes on drag ----------------------------------+----------------------------------------- Reporter: guy.linton@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: gtk2 ----------------------------------+----------------------------------------- libgdk-x11/libgdk-x11 crashes on drag. The application (Gramps) crashes with "Bus Error" on click-dragging. The row I am trying to drag moves about 5mm and stays there, the mouse cursor changes to a cross with an angle around and moves with the mouse, there is a pause of a second or so, and then the application crashes with the message Bus Error. The console log is attached, apparently showing a crash in _xwindow_get_shape of libgdk-x11-2.0.0.dylib. This is on Tiger Mac OS X 10.4.11, PowerPC. -- Ticket URL: <http://trac.macports.org/ticket/24685> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #25151: info menus are not displayed
by MacPorts 15 Nov '13

15 Nov '13

#25151: info menus are not displayed --------------------------------+------------------------------------------- Reporter: idoadam@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: texinfo --------------------------------+------------------------------------------- When info is run from the command line the menus are not displayed. The menus are definitely there since pressing m and then the Tab key displays the possible completions and selecting any of them works (except that the menus in that node are not displayed either). The menus are displayed correctly in Emacs using C-h C-i. I am using texinfo 4.13 compiled with MacPorts 1.8.2 on Mac OS X 10.6.3. -- Ticket URL: <http://trac.macports.org/ticket/25151> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 18

[MacPorts] #29420: NEW: py26-pyang
by MacPorts 13 Nov '13

13 Nov '13

#29420: NEW: py26-pyang ----------------------------------+----------------------------------------- Reporter: software@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: py26-pyang ----------------------------------+----------------------------------------- Attached is a portfile for pyang, a Python implementation of the YANG protocol. -- Ticket URL: <https://trac.macports.org/ticket/29420> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #18361: LaunchDaemon script
by MacPorts 13 Nov '13

13 Nov '13

#18361: LaunchDaemon script ----------------------------------+----------------------------------------- Reporter: yaohua2000@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Port Requests Component: ports | Version: 1.7.0 Keywords: | Port: tor ----------------------------------+----------------------------------------- The port "tor" need a LaunchDaemon. -- Ticket URL: <http://trac.macports.org/ticket/18361> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #28839: perl5.12 won't compile with Xcode 4
by MacPorts 12 Nov '13

12 Nov '13

#28839: perl5.12 won't compile with Xcode 4 -----------------------------------------+---------------------------------- Reporter: christopher.hearn@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: perl5.12 xcode4 | Port: perl5.12 -----------------------------------------+---------------------------------- After upgrading to Xcode4, perl5.12 won't compile: $ sudo port -v upgrade outdated ---> Configuring perl5.12 First let's make sure your kit is complete. Checking... Would you like to see the instructions? [n] ........ Install any extra modules (y or n)? [n] Directory for the main Perl5 html pages? (~name ok) [none] Directory for the Perl5 module html pages? (~name ok) [none] Do you want to install perl as /usr/bin/perl? [n] Checking for GNU C Library... Shall I use /usr/bin/nm to extract C symbols from the libraries? [y] I can't seem to find your C library. I've looked in the following places: ............ And it hangs at that point. -- Ticket URL: <https://trac.macports.org/ticket/28839> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 14

[MacPorts] #27576: xpdf issues "could'nt create a font for..."
by MacPorts 12 Nov '13

12 Nov '13

#27576: xpdf issues "could'nt create a font for..." -----------------------------------+---------------------------------------- Reporter: j.van_den_hoff@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: xpdf -----------------------------------+---------------------------------------- xpdf issues these errors when viewing a document: {{{ Error: Couldn't create a font for 'Helvetica' Error: Couldn't create a font for 'Helvetica-Bold' Error: Couldn't create a font for 'ZapfDingbats' }}} helvetica actually is used in the document, but zapfdingbats is not AFAICS. I activated the font definitions from the default xpdfrc in my .xpdfrc which defines the fonts to be find as follows: {{{ displayFontT1 Times-Roman /opt/local/share/ghostscript/fonts/n021003l.pfb displayFontT1 Times-Italic /opt/local/share/ghostscript/fonts/n021023l.pfb displayFontT1 Times-Bold /opt/local/share/ghostscript/fonts/n021004l.pfb displayFontT1 Times-BoldItalic /opt/local/share/ghostscript/fonts/n021024l.pfb displayFontT1 Helvetica /opt/local/share/ghostscript/fonts/n019003l.pfb displayFontT1 Helvetica-Oblique /opt/local/share/ghostscript/fonts/n019023l.pfb displayFontT1 Helvetica-Bold /opt/local/share/ghostscript/fonts/n019004l.pfb displayFontT1 Helvetica-BoldOblique /opt/local/share/ghostscript/fonts/n019024l.pfb displayFontT1 Courier /opt/local/share/ghostscript/fonts/n022003l.pfb displayFontT1 Courier-Oblique /opt/local/share/ghostscript/fonts/n022023l.pfb displayFontT1 Courier-Bold /opt/local/share/ghostscript/fonts/n022004l.pfb displayFontT1 Courier-BoldOblique /opt/local/share/ghostscript/fonts/n022024l.pfb displayFontT1 Symbol /opt/local/share/ghostscript/fonts/s050000l.pfb displayFontT1 ZapfDingbats /opt/local/share/ghostscript/fonts/d050000l.pfb }}} but I don't see them in the specified location. maybe they are elsewhere but it does not work out of the box. some time ago (but not in 1.9.1) xpdf still did. finally, for completeness, I see the following message on startup of xpdf {{{ Error: No paper information available - using defaults }}} although `psPaperSize' is specified in my .xpdfrc. -- Ticket URL: <https://trac.macports.org/ticket/27576> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #30599: h2ph not rerun after perl5 upgrade
by MacPorts 12 Nov '13

12 Nov '13

#30599: h2ph not rerun after perl5 upgrade ---------------------------------+------------------------------------------ Reporter: vinc17@… | Owner: ricci@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.1 Keywords: | Port: perl5 ---------------------------------+------------------------------------------ When I upgraded perl5 to 5.12, the modules were automatically reinstalled as there revision was increased, but h2ph was not rerun (this is needed by p5-filesys-diskspace). Everything went apparently fine, without error messages, and this module silently became unusable for this obscure reason. It took me some time to debug this, as the error message when using this module was just: Cannot use df on this machine (untested or unsupported). The h2ph command should have been rerun or there should have been a clear message at the end. -- Ticket URL: <https://trac.macports.org/ticket/30599> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #23143: Add ActiveMQ to Macports.
by MacPorts 12 Nov '13

12 Nov '13

#23143: Add ActiveMQ to Macports. --------------------------------------+------------------------------------- Reporter: brian.gupta@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: --------------------------------------+------------------------------------- Could we get this Apache Project message queuing server software added to MacPorts.. http://activemq.apache.org/ The latest version, 5.3, can be downloaded here: http://activemq.apache.org/activemq-530-release.html Please let me know if you have any questions, or need any help. -- Ticket URL: <http://trac.macports.org/ticket/23143> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #18881: AFFLIB / FUSE
by MacPorts 12 Nov '13

12 Nov '13

#18881: AFFLIB / FUSE -----------------------------------+---------------------------------------- Reporter: macports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: AFFLIB FUSE | Port: AFFLIB -----------------------------------+---------------------------------------- Would it be possible to get the FUSE variant of AFFLIB working? I'm attempting to use "affuse" from that package and get an error that FUSE isn't installed. Web support indicates that the FUSE developer files need to be installed before we complie AFFLIB. I edited the AFFLIB Portfile to enable the FUSE variant, and installed. I get the following output: {{{ configure: FUSE requested checking fuse.h usability... no checking fuse.h presence... no checking for fuse.h... no configure: fuse.h not found; Disabling FUSE support. }}} I do have MacFuse 1.7.1 installed, and fuse.h is in /opt/local/include. I'm willing to do legwork to get it going but am at the end of my current capabilities. Thanks. -- Ticket URL: <http://trac.macports.org/ticket/18881> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5