October 2012 - macports-tickets - lists.macosforge.org

[MacPorts] #36513: llvm-3.1 instal fails
by MacPorts 08 Oct '12

08 Oct '12

#36513: llvm-3.1 instal fails ---------------------+-------------------------------- Reporter: david@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: llvm ---------------------+-------------------------------- -- Ticket URL: <https://trac.macports.org/ticket/36513> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #36305: Coin: compile fails with llvm-gcc-4.2
by MacPorts 08 Oct '12

08 Oct '12

#36305: Coin: compile fails with llvm-gcc-4.2 --------------------------+------------------- Reporter: ryandesign@… | Owner: css@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: haspatch | Port: Coin --------------------------+------------------- Patch is here: https://bitbucket.org/Coin3D/coin/issue/20/redefinition-of- for-index-variable-makes -- Ticket URL: <https://trac.macports.org/ticket/36305> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #36509: graphviz +smyrna archcheck files wrong when +quartz GTK is installed
by MacPorts 08 Oct '12

08 Oct '12

#36509: graphviz +smyrna archcheck files wrong when +quartz GTK is installed ----------------------+-------------------------------- Reporter: daniel@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: graphviz ----------------------+-------------------------------- graphviz built with `+no_x11 +smyrna` fails to configure when I also have built: {{{ gtk2 @2.24.12_0+no_x11+quartz (active) gtkglext @1.2.0_7+quartz (active) }}} This is because graphviz declares `archcheck.files-append lib/libgtkglext-x11-1.0.dylib`, but I have `lib/libgtkglext- quartz-1.0.dylib` from the +quartz variant. The archcheck fails for the obvious reason. -- Ticket URL: <https://trac.macports.org/ticket/36509> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #36500: graphviz missing libtool depends_lib dependency for acyclic
by MacPorts 08 Oct '12

08 Oct '12

#36500: graphviz missing libtool depends_lib dependency for acyclic ---------------------+-------------------------- Reporter: blair@… | Owner: ryandesign@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: graphviz ---------------------+-------------------------- I emailed Ryan directly, but entering this ticket in case he's on vacation so I can fix it in 3 days for maintainer timeout ;) I'm building a custom archive of MacPorts with a different prefix ports and ran into this issue. Installing graphviz on a system that can only download archives fails because graphviz doesn't declare a dependency on libtool: {{{ $ port provides /opt/local-10.7-2012-08/bin/acyclic /opt/local-10.7-2012-08/bin/acyclic is provided by: graphviz $ otool -L /opt/local-10.7-2012-08/bin/acyclic /opt/local-10.7-2012-08/bin/acyclic: /opt/local-10.7-2012-08/lib/libcgraph.6.dylib (compatibility version 7.0.0, current version 7.0.0) /opt/local-10.7-2012-08/lib/libcdt.5.dylib (compatibility version 6.0.0, current version 6.0.0) /opt/local-10.7-2012-08/lib/libltdl.7.dylib (compatibility version 11.0.0, current version 11.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 159.1.0) $ port provides /opt/local-10.7-2012-08/lib/libltdl.7.dylib /opt/local-10.7-2012-08/lib/libltdl.7.dylib is provided by: libtool }}} I can add the dependency and bump the rev. Here's the error {{{ x ./opt/local-10.7-2012-08/ x ./opt/local-10.7-2012-08/bin/ x ./opt/local-10.7-2012-08/share/ x ./opt/local-10.7-2012-08/share/man/ x ./opt/local-10.7-2012-08/share/man/man1/ x ./opt/local-10.7-2012-08/share/man/man1/doxygen.1.gz x ./opt/local-10.7-2012-08/bin/doxygen ---> Updating database of binaries: 100.0% ---> Scanning binaries for linking errors: 94.9% Could not open /opt/local-10.7-2012-08/lib/libltdl.7.dylib: Error opening or reading file (referenced from /opt/local-10.7-2012-08/bin/acyclic) ---> Scanning binaries for linking errors: 100.0% ---> Found 40 broken file(s), matching files to ports ---> Found 1 broken port(s), determining rebuild order ---> Rebuilding in orderacyclic graphviz @2.28.0 +java ---> Computing dependencies for graphviz. ---> Scanning binaries for linking errors: 94.9% Could not open /opt/local-10.7-2012-08/lib/libltdl.7.dylib: Error opening or reading file (referenced from /opt/local-10.7-2012-08/bin/acyclic) ---> Scanning binaries for linking errors: 100.0% ---> Found 40 broken file(s), matching files to ports Port graphviz still broken after reinstalling -- can't rebuild due to binary-only mode while executing "error "Port $portname still broken after reinstalling -- can't rebuild due to binary-only mode"" (procedure "revupgrade_scanandrebuild" line 258) invoked from within "revupgrade_scanandrebuild broken_port_counts $opts" (procedure "macports::revupgrade" line 5) invoked from within "macports::revupgrade $opts" (procedure "action_revupgrade" line 2) invoked from within "action_revupgrade $action $portlist $opts" (procedure "action_target" line 94) invoked from within "$action_proc $action $portlist [array get global_options]" (procedure "process_cmd" line 95) invoked from within "process_cmd $remaining_args" invoked from within "if { [llength $remaining_args] > 0 } { # If there are remaining arguments, process those as a command set exit_status [process_cmd $remaining..." (file "/opt/local-10.7-2012-08/bin/port" line 4784) }}} -- Ticket URL: <https://trac.macports.org/ticket/36500> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #36444: perl 5.12 +universal build failed
by MacPorts 07 Oct '12

07 Oct '12

#36444: perl 5.12 +universal build failed -----------------------+-------------------------------- Reporter: poorsod@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: perl5.12 -----------------------+-------------------------------- Perl 5.12 +universal is a dependency of Wine. When I try and install it (either using 'sudo port install wine' or 'sudo port install perl5.12 +universal') I get the following error: {{{ Error: org.macports.build for port perl5.12 returned: command execution failed Error: Failed to install perl5.12 Please see the log file for port perl5.12 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_perl5.12/perl5.12/main.log }}} I've tried cleaning the ports and reinstalling several times. Attached is the log file, which contains the following two lines: {{{ :info:build ld: in /opt/local/lib/libstdc++.6.dylib, file was built for unsupported file format ( 0xcf 0xfa 0xed 0xfe 0x 7 0x 0 0x 0 0x 1 0x 3 0x 0 0x 0 0x 0 0x 6 0x 0 0x 0 0x 0 ) which is not the architecture being linked (i386): /opt/local/lib/libstdc++.6.dylib for architecture i386 }}} and {{{ :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_perl5.12/perl5.12/work/perl-5.12.4" && /usr/bin/make -j2 -w all }}} I hope this is enough information. Thanks, Benjamin Hodgson -- Ticket URL: <https://trac.macports.org/ticket/36444> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #36504: apple-gcc42 build error
by MacPorts 07 Oct '12

07 Oct '12

#36504: apple-gcc42 build error -------------------------+-------------------------------- Reporter: shaman888@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: apple-gcc42 | Port: apple-gcc42, wine -------------------------+-------------------------------- I've studied similar and same cases in tickets, but it didn't help. I wanted to get "wine" over port and it did well except for apple-gcc42. cctools installed fine too. That's what I did to try solving the problem: sudo port -d selfupdate sudo port clean apple-gcc42 sudo port -d install apple-gcc42 My MacOS: Darwin Kernel Version 12.2.0 Mountain Lion Error: Exit code: 2 Error: org.macports.build for port apple-gcc42 returned: command execution failed More: Undefined symbols for architecture x86_64: "___bswapdi2", referenced from: -exported_symbol[s_list] command line option "___bswapsi2", referenced from: -exported_symbol[s_list] command line option ld: symbol(s) not found for architecture x86_64 collect2: ld returned 1 exit status make[5]: *** [libgcc_s.dylib] Error 1 make[5]: *** Waiting for unfinished jobs.... make[4]: *** [stmp-multilib] Error 2 rm cpp.pod gpl.pod gfdl.pod fsf-funding.pod gcc.pod gcov.pod make[3]: *** [all-stage1-gcc] Error 2 make[2]: *** [stage1-bubble] Error 2 make[1]: *** [all] Error 2 + exit 1 make: *** [install] Error 1 ... ... DEBUG: Error code: CHILDSTATUS 44340 2 DEBUG: Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" Warning: targets not executed for apple-gcc42: org.macports.activate org.macports.build org.macports.destroot org.macports.install -- Ticket URL: <https://trac.macports.org/ticket/36504> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #35420: makepasswd won't build on mac 10.8
by MacPorts 07 Oct '12

07 Oct '12

#35420: makepasswd won't build on mac 10.8 ------------------------+--------------------------------------------------- Reporter: ak@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: makepasswd ------------------------+--------------------------------------------------- {{{ ---> Computing dependencies for makepasswd ---> Dependencies to be installed: p5.12-crypt-passwdmd5 ---> Configuring p5.12-crypt-passwdmd5 Error: org.macports.configure for port p5.12-crypt-passwdmd5 returned: command execution failed Error: Failed to install p5.12-crypt-passwdmd5 Please see the log file for port p5.12-crypt-passwdmd5 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5 -crypt-passwdmd5/p5.12-crypt-passwdmd5/main.log Error: The following dependencies were not installed: p5.12-crypt- passwdmd5 To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port makepasswd failed }}} -- Ticket URL: <https://trac.macports.org/ticket/35420> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #36469: ftgl: request to add openmaintainer
by MacPorts 07 Oct '12

07 Oct '12

#36469: ftgl: request to add openmaintainer -------------------------+------------------------ Reporter: blair@… | Owner: krugazor@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ftgl -------------------------+------------------------ Hello, We're starting to use ftgl for some internal projects and we need debugging symbols added. I'd like to modify the port to add -g to CFLAGS and CXXFLAGS. Can we add openmaintainer and myself to the list of maintainers. Thanks, Blair -- Ticket URL: <https://trac.macports.org/ticket/36469> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #36483: Update LuaJIT to 2.0.0-beta10
by MacPorts 07 Oct '12

07 Oct '12

#36483: Update LuaJIT to 2.0.0-beta10 ----------------------+-------------------------------- Reporter: daniel@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: luajit ----------------------+-------------------------------- The attached patch updates the LuaJIT port from 2.0.0-beta6 to 2.0.0-beta10, and fixes the livecheck paths. It also merges support for the MacPorts compiler and CFLAGS from the lua port. -- Ticket URL: <https://trac.macports.org/ticket/36483> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #36484: Use `amalg` target for LuaJIT build
by MacPorts 07 Oct '12

07 Oct '12

#36484: Use `amalg` target for LuaJIT build -------------------------+-------------------------------- Reporter: daniel@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: -------------------------+-------------------------------- The LuaJIT distribution includes an `amalg` target that bundles all the C code into a single file, then compiles that. This is their recommended compilation strategy: > The build system has a special target for an amalgamated build, i.e. make amalg. This compiles the LuaJIT core as one huge C file and allows GCC to generate faster and shorter code. Alas, this requires lots of memory during the build. This may be a problem for some users, that's why it's not enabled by default. But it shouldn't be a problem for most build farms. It's recommended that binary distributions use this target for their LuaJIT builds. This patch modifies the build to use the amalg target rather than all. -- Ticket URL: <https://trac.macports.org/ticket/36484> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3