May 2012 - macports-tickets - lists.macosforge.org

[MacPorts] #31740: tftp-hpa: use notes instead of ui_msg
by MacPorts 20 Apr '14

20 Apr '14

#31740: tftp-hpa: use notes instead of ui_msg -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: markd@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: tftp-hpa -------------------------------------+-------------------------------------- tftp-hpa should use the notes feature instead of manually printing ui_msg's. -- Ticket URL: <https://trac.macports.org/ticket/31740> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #25899: [NEW] net/nsm-console
by MacPorts 19 Apr '14

19 Apr '14

#25899: [NEW] net/nsm-console ------------------------------+--------------------------------------------- Reporter: jul_bsd@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: ------------------------------+--------------------------------------------- NSM-Console (Network Security Monitoring Console) is a framework for performing analysis on packet capture files. It implements a modular structure to allow for an analyst to quickly write modules of their own without any programming language experience. Using these modules a large amount of pcap analysis can be performed quickly using a set of global (as well as per-module) options. It aims to be simple to run and easy to understand without a lot of learning time. => This port has some dependencies on new ports (chaosreader, tcpxtract, ...) -- Ticket URL: <http://trac.macports.org/ticket/25899> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #33316: pgplot install problem
by MacPorts 19 Apr '14

19 Apr '14

#33316: pgplot install problem ----------------------------------+----------------------------------------- Reporter: chuckh@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: pgplot ----------------------------------+----------------------------------------- I have an osx 10.6 x86_64 mac for which I successfully installed pgplot. However, I needed a universal installation to be i386 compatible and I messed around with macports.conf and now things don't work. I restored macports.conf, uninstalled pgplot and cleaned pgplot and attempted to once again install pgplot for the x86_64 and the install fails. Any help would be appreciated.[] [Chuck-Horsts-MacBook-Air:~] chuckhorst% sudo port install pgplot ---> Computing dependencies for pgplot ---> Building pgplot Error: Target org.macports.build returned: shell command failed (see log for details) Log for pgplot is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_pgplot/pgplot/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> -- Ticket URL: <https://trac.macports.org/ticket/33316> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #17196: wview 4.0.1 install missing daemons wvhttpd wviewsqld
by MacPorts 17 Apr '14

17 Apr '14

#17196: wview 4.0.1 install missing daemons wvhttpd wviewsqld -------------------------------------+-------------------------------------- Reporter: tshaw(a)oitc.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: wview wvhttpd wviewsqld | Port: wview 4.0.1 -------------------------------------+-------------------------------------- missing wvhttpd and wviewsqld. all other daemons installed fine: -rwxr-xr-x 2 root admin 23084 Nov 6 16:15 radmrouted -rwxr-xr-x 2 root admin 46920 Nov 11 17:11 wvalarmd -rwxr-xr-x 2 root admin 33228 Nov 11 17:11 wvcwopd -rwxr-xr-x 2 root admin 72512 Nov 11 17:11 wviewconfig -rwxr-xr-x 2 root admin 97464 Nov 11 17:11 wviewd -rwxr-xr-x 2 root admin 33376 Nov 11 17:11 wviewftpd -rwxr-xr-x 2 root admin 6148 Nov 11 17:11 wviewhtmlconfig -rwxr-xr-x 2 root admin 33320 Nov 11 17:11 wviewsshd -rwxr-xr-x 2 root admin 33912 Nov 11 17:11 wvpmond -rwxr-xr-x 2 root admin 245032 Nov 11 17:11 htmlgend -- Ticket URL: <http://trac.macports.org/ticket/17196> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 11

[MacPorts] #22910: Dbus still crashing in 10.6.2 on startx
by MacPorts 16 Apr '14

16 Apr '14

#22910: Dbus still crashing in 10.6.2 on startx ---------------------------------+------------------------------------------ Reporter: zacdurham@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: dbus ---------------------------------+------------------------------------------ Despite the closed ticket #21595, any attempt to 'startx' will inevitably result in the same dbus crash. I am working off of a fresh port tree and after a couple of hours am convinced this is still defective. xxxxxOSX:~ xxxxx$ startx font_cache: Scanning user font directories to generate X11 font caches font_cache: Updating FC cache launch_msg("CheckIn") IPC failure: Operation not permitted Xquartz: X11.app = /Applications/Utilities/X11.app/Contents/MacOS/X11 Xquartz: Starting X server: /Applications/Utilities/X11.app/Contents/MacOS/X11 --listenonly X11.app: main(): argc=2 argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin argv[1] = --listenonly Waiting for startup parameters via Mach IPC. X11.app: do_start_x11_server(): argc=4 argv[0] = /usr/X11/bin/X argv[1] = :0 argv[2] = -nolisten argv[3] = tcp Xquartz starting: X.Org X Server 1.4.2-apple45 Build Date: 20090705 (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base 2009-12-15 23:50:59.063 X11.bin[4958:90b] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find: /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper X11.bin: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers. Failed to start message bus: launch_msg("CheckIn") IPC failure: Operation not permitted EOF in dbus-launch reading address from bus daemon waiting for X server to shut down Quitting Xquartz... font_cache: Done -- Ticket URL: <http://trac.macports.org/ticket/22910> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #22312: readline-6.0.000_2 configuration fails on i386 with +universal
by MacPorts 12 Apr '14

12 Apr '14

#22312: readline-6.0.000_2 configuration fails on i386 with +universal ------------------------------------------------+--------------------------- Reporter: steini@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: readline, configuration, universal | Port: readline ------------------------------------------------+--------------------------- Hi, I'm trying to build this port with the +universal modifier but it fails in configuration step. I'm on a 1st gen. MacbookPro with only a CoreDuo (so no possibility to execute x86_64. but i need this for linking against) -- Ticket URL: <http://trac.macports.org/ticket/22312> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #33036: sdcc update port to 3.1.0
by MacPorts 08 Apr '14

08 Apr '14

#33036: sdcc update port to 3.1.0 --------------------------------------+------------------------------------- Reporter: lara.dougan@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: haspatch | Port: sdcc --------------------------------------+------------------------------------- Hi. Here is a patch to update SDCC to version 3.1.0. I also removed avr and x51 then added variants for them because they are unsupported by SDCC now. -- Ticket URL: <https://trac.macports.org/ticket/33036> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #32533: txt2regex: noarch; license; manpage location
by MacPorts 08 Apr '14

08 Apr '14

#32533: txt2regex: noarch; license; manpage location -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: grrr@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: haspatch | Port: txt2regex -------------------------------------+-------------------------------------- The txt2regex port installs a manpage, but with the wrong extension (".man" instead of the required ".1"), so "man txt2regex" doesn't actually find it. The attached Portfile patch fixes this, and indicates that the port doesn't install any architecture-specific files, and builds and installs the localized message catalogs. It does this by removing the custom destroot phase the Portfile had been using, and instead patching the Makefile to work properly. The Makefile patch makes the following changes: * Introduces PREFIX variable and uses it instead of assuming /usr * Fixes how DESTDIR is handled so that DESTDIR doesn't get written into the final txt2regex script * Replaces "echo -n" (which doesn't work as intended on POSIX-compliant systems like Snow Leopard and higher) with "printf" * Installs manpage The Makefile patch should be suitable for submission to the developers of this software, if they're interested. -- Ticket URL: <https://trac.macports.org/ticket/32533> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #25686: Add crypto variants to openssl & use system zlib
by MacPorts 07 Apr '14

07 Apr '14

#25686: Add crypto variants to openssl & use system zlib ------------------------------------+--------------------------------------- Reporter: michaelld@… | Owner: mww@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: openssl ------------------------------------+--------------------------------------- OpenSSL 1.0.0a allows for extensions for md2, kerberos, and others as well as moves to using system (MacPorts) provided zlib. I'm attaching a patch to the current (1.0.0a, epoch 1, revision 0) Portfile to allow these changes. The default install isn't changed, and in my testing openssl works just before with or without the variants (the variants are plugin extensions and headers, and do not impact the application). -- Ticket URL: <http://trac.macports.org/ticket/25686> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 12

[MacPorts] #32652: gvfs cannot open remote urls
by MacPorts 07 Apr '14

07 Apr '14

#32652: gvfs cannot open remote urls ------------------------------+--------------------------------------------- Reporter: brandon@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: gtk, gvfs | Port: gvfs ------------------------------+--------------------------------------------- This may be related more deeply to Gio but gvfs cannot open remote uri's. There is a [https://trac.macports.org/ticket/32020 similar bug] reported for Gimp but this is a more general issue that I also experience when programming with Giomm and trying to use Giomm::File to open remote uris. [[BR]] /opt/local/bin/gvfs-open http://www.macports.com [[BR]] gvfs-open: http://www.macports.com: error opening location: Operation not supported -- Ticket URL: <https://trac.macports.org/ticket/32652> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6