August 2012 - macports-tickets - lists.macosforge.org

[MacPorts] #35680: AtomicParsley build failure on Mountain Lion: "Error: reinplace: sed: RE error: illegal byte sequence"
by MacPorts 15 Aug '12

15 Aug '12

#35680: AtomicParsley build failure on Mountain Lion: "Error: reinplace: sed: RE error: illegal byte sequence" ---------------------------+------------------------------------------------ Reporter: rrg@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ---------------------------+------------------------------------------------ Building AtomicParsley on Mountain Lion fails with Error: reinplace: sed: RE error: illegal byte sequence I see that this is described elsewhere as "a common problem in Mountain Lion with a simple fix", but I can't track down the fix. Can someone please apply and/or describe the fix? Thanks. -- Ticket URL: <https://trac.macports.org/ticket/35680> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #35677: macports not working...
by MacPorts 15 Aug '12

15 Aug '12

#35677: macports not working... ------------------------------------+--------------------------------------- Reporter: eatshit@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ------------------------------------+--------------------------------------- Hello. I recently upgraded to Mac OS X Mountain Lion. After doing that, I am now unable to install anything using, "sudo port install..." Everytime I try to do that, I get, "Unable to execute port: can't read "build.cmd": Failed to locate 'make' in path: '/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin' or at its MacPorts configuration time location, did you move it?" I researched on the Internet & was told that I need to upgrade XCode. So, I did upgrade XCode to a version that is compatible to OS X Mountain Lion. Plus, I uninstalled MacPorts & downloaded the Mountain Lion version of MacPorts & installed that. In spite of doing all that, I am still getting that error. Why am I still getting that error? -- Ticket URL: <https://trac.macports.org/ticket/35677> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #35675: oci_connect(): OCIEnvNlsCreate() failed
by MacPorts 15 Aug '12

15 Aug '12

#35675: oci_connect(): OCIEnvNlsCreate() failed --------------------------------+------------------------------------------- Reporter: sawright@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: oracle apache php5 | Port: oracle-instantclient php5-oracle --------------------------------+------------------------------------------- I've been trying to add on Oracle connectivity to an existing webserver (php5, apache2) managed by macports successfully for years. I installed 'oracle-instantclient' and 'php5-oracle'. phpinfo shows the oci library loaded, but when I try to connect to an external database, I get the error: "Warning: oci_connect(): OCIEnvNlsCreate() failed. There is something wrong with your system - please check that DYLD_LIBRARY_PATH includes the directory with Oracle Instant Client libraries in /path/to/oci.php on line 9 Fatal error: in /path/to/oci.php on line 12" I've tried reloaded the oracle-instantclient (https://trac.macports.org/ticket/23148) but that hasn't done anything. I also tried using the 'php53-oracle' variant, but that didn't do anything to change the end result, either. I also tried adding the DYLD path to various locations ('/opt/local/apache2/bin/envvars',.profile,etc.) as per the hint here 'http://lists.macosforge.org/pipermail/macports- users/2011-July/024699.html', still no luck. Any idea what I can do to get this working? Thanks! -- Ticket URL: <https://trac.macports.org/ticket/35675> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #35676: ocaml native binaries crash often
by MacPorts 15 Aug '12

15 Aug '12

#35676: ocaml native binaries crash often --------------------------------+------------------------------------------- Reporter: darius@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: mountainlion | Port: ocaml --------------------------------+------------------------------------------- This is apparently due to an alignment problem as explained here http://caml.inria.fr/mantis/view.php?id=5700#c7871 -- Ticket URL: <https://trac.macports.org/ticket/35676> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #34164: New port: py-bottle
by MacPorts 15 Aug '12

15 Aug '12

#34164: New port: py-bottle ---------------------------------+------------------------------------------ Reporter: torstenb@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: py-bottle ---------------------------------+------------------------------------------ New port for python module bottle: A web micro framework. Supports python 2.5, 2.6, 2.7, 3.1 and 3.2 -- Ticket URL: <https://trac.macports.org/ticket/34164> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #34151: apache-ant @1.8.3 update
by MacPorts 15 Aug '12

15 Aug '12

#34151: apache-ant @1.8.3 update ------------------------------------+--------------------------------------- Reporter: nhoj.patrick@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: haspatch | Port: ------------------------------------+--------------------------------------- Ant version 1.8.3 was released on 2012/02/29. Patch supplied. -- Ticket URL: <https://trac.macports.org/ticket/34151> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #34143: ocaml-ocamlnet : all variants available in configure
by MacPorts 15 Aug '12

15 Aug '12

#34143: ocaml-ocamlnet : all variants available in configure ---------------------------------------------+------------------------------ Reporter: pierreetienne.meunier@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: ---------------------------------------------+------------------------------ I've just tested a new portfile for ocaml-ocamlnet, including all the variants in the configure from the source distribution. -- Ticket URL: <https://trac.macports.org/ticket/34143> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #34129: groff @1.21 installation erro - build failure
by MacPorts 14 Aug '12

14 Aug '12

#34129: groff @1.21 installation erro - build failure -----------------------------------+---------------------------------------- Reporter: faryabib@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: -----------------------------------+---------------------------------------- Sorry for the incomplete earlier posting. I followed your suggestion and installed groff after “sudo port clean groff". Attached is the main.log. Thanks, Robert Comment: The error in the log is: {{{ :info:destroot /usr/bin/install -c -m 644 img/pic* \ :info:destroot /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_groff/groff/work/destroot/opt/local/share/doc/groff-1.21/html/img :info:destroot install: img/pic*: No such file or directory }}} However, since this was not a clean build attempt, please "sudo port clean groff", then try again, then attach the new main.log so we can see what really happened. -- Ticket URL: <https://trac.macports.org/ticket/34129> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #34123: libdbi-drivers incorrect compiler parameter on mysql fails to compile
by MacPorts 14 Aug '12

14 Aug '12

#34123: libdbi-drivers incorrect compiler parameter on mysql fails to compile ---------------------------+------------------------------------------------ Reporter: jrojas@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: clang, libdbi | Port: libdbi-drivers ---------------------------+------------------------------------------------ I was installing gnucash and tried to add mysql support, upgrading libdbi- drivers. Default compile (+sqlite3 driver) works mysql (+mysql5) fails because of -O20 parameter; it's for gcc, not clang. My solution: After editing [Makefile] & [configure] on msql directory, removing the offending parameter ([-O20], I retried and compiled/installed fine. I think just removing the parameter from configure (cflags=..., profile=...) will do it. Note: Postgress driver fails with same error. Others may too. OSX 10.7, spanish, xcode 4.3.2 Detail of log (note wrong [-O20]): sudo port install libdbi-drivers +mysql5 +sqlite3 ... :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_databases_libdbi-drivers/libdbi-drivers/work /libdbi-drivers-0.8.3-1/drivers/sqlite3' :info:build if /bin/sh ../../libtool --tag=CC --mode=compile /usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../include -I/opt/local/include -I/opt/local/include -I/opt/local/include '''-O20''' -D__NO_MATH_INLINES -fsigned-char -MT dbd_sqlite3.lo -MD -MP -MF ".deps/dbd_sqlite3.Tpo" -c -o dbd_sqlite3.lo dbd_sqlite3.c; \ :info:build then mv -f ".deps/dbd_sqlite3.Tpo" ".deps/dbd_sqlite3.Plo"; else rm -f ".deps/dbd_sqlite3.Tpo"; exit 1; fi :info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../include -I/opt/local/include -I/opt/local/include -I/opt/local/include -O20 -D__NO_MATH_INLINES -fsigned-char -MT dbd_sqlite3.lo -MD -MP -MF .deps/dbd_sqlite3.Tpo -c dbd_sqlite3.c -fno- common -DPIC -o .libs/dbd_sqlite3.o :info:build error: invalid value '4' in '-O20' :info:build make[3]: *** [dbd_sqlite3.lo] Error 1 Keep up the good work :) -- Ticket URL: <https://trac.macports.org/ticket/34123> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #34121: coreutils @8.15 - uptime insane
by MacPorts 14 Aug '12

14 Aug '12

#34121: coreutils @8.15 - uptime insane -----------------------------------+---------------------------------------- Reporter: jimnieken@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: -----------------------------------+---------------------------------------- GNU Coreutils has some strange behavior using uptime. Below is the output from GNU uptime and OSX uptime. {{{ computer:~ jimnieken$ uname -a Darwin computer 11.3.0 Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64 x86_64 i386 MacBookPro5,4 Darwin computer:~ jimnieken$ which -a uptime /opt/local/libexec/gnubin/uptime /usr/bin/uptime computer:~ jimnieken$ /opt/local/libexec/gnubin/uptime --version uptime (GNU coreutils) 8.15 Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by Joseph Arceneaux, David MacKenzie, and Kaveh Ghazi. computer:~ jimnieken$ /opt/local/libexec/gnubin/uptime 19:49pm up 4126 days 0:49, 3 users, load average: 0.39, 0.36, 0.41 computer:~ jimnieken$ /usr/bin/uptime 19:49 up 10 days, 9:32, 3 users, load averages: 0.36 0.36 0.41 computer:~ jimnieken$ }}} Can you help with this? Thanks! -- Ticket URL: <https://trac.macports.org/ticket/34121> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2