January 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #37343: add a "-subversion" variant to nmap
by MacPorts 06 Jan '13

06 Jan '13

#37343: add a "-subversion" variant to nmap -----------------------+-------------------------------- Reporter: irony42@… | Owner: macports-tickets@… Type: request | Status: new Priority: Low | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: -----------------------+-------------------------------- nmap builds fine without subversion, albeit without an "nmap-update" feature. It would be nice to be able to forgo this dependency via a variant. -- Ticket URL: <https://trac.macports.org/ticket/37343> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #37327: aqua/Handbrake Uses Sparkle Framework
by MacPorts 06 Jan '13

06 Jan '13

#37327: aqua/Handbrake Uses Sparkle Framework -----------------------------+-------------------------------- Reporter: rmstonecipher@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: handbrake -----------------------------+-------------------------------- Handbrake uses the Sparkle framework in an attempt to self-update. This should be disabled so that MacPorts controls the version installed. -- Ticket URL: <https://trac.macports.org/ticket/37327> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #37543: syck: error: conflicting types for 'syckparse'
by MacPorts 06 Jan '13

06 Jan '13

#37543: syck: error: conflicting types for 'syckparse' --------------------------+----------------------- Reporter: ryandesign@… | Owner: lharple@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: syck --------------------------+----------------------- {{{ gram.h:107:5: error: conflicting types for 'syckparse' int syckparse (void); ^ ./syck.h:471:5: note: previous declaration is here int syckparse( void * ); ^ 1 error generated. make[2]: *** [gram.o] Error 1 }}} -- Ticket URL: <https://trac.macports.org/ticket/37543> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #37485: magicpp will not install
by MacPorts 06 Jan '13

06 Jan '13

#37485: magicpp will not install ---------------------------------+-------------------------------- Reporter: staffan.scherloff@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: installation | Port: magicpp 2.16.1 ---------------------------------+-------------------------------- Magicpp 2.16.1 will not install on a freshly installed system. However, all dependencies will. Copy of log enclosed. -- Ticket URL: <https://trac.macports.org/ticket/37485> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 11

[MacPorts] #37512: php-Twig: new port
by MacPorts 06 Jan '13

06 Jan '13

#37512: php-Twig: new port -----------------------------+-------------------------------- Reporter: robsonpeixoto@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: php-Twig -----------------------------+-------------------------------- Enhances the performance of the Twig runtime engine -- Ticket URL: <https://trac.macports.org/ticket/37512> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #37527: cmake portgroup broken with latest version of cmake, 2.8.10
by MacPorts 05 Jan '13

05 Jan '13

#37527: cmake portgroup broken with latest version of cmake, 2.8.10 -------------------------+------------------------------------------------- Reporter: mmoll@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: cmake, | Port: any port that uses the cmake port portgroup | group -------------------------+------------------------------------------------- I get this error using the cmake portgroup: {{{ CMake Error at /opt/local/share/cmake-2.8/Modules/Platform/Darwin.cmake:190 (message): CMAKE_OSX_DEPLOYMENT_TARGET is '10.8' but CMAKE_OSX_SYSROOT: "/" is not set to a MacOSX SDK with a recognized version. Either set CMAKE_OSX_SYSROOT to a valid SDK or set CMAKE_OSX_DEPLOYMENT_TARGET to empty. }}} The solution seems to be to simply remove "-DCMAKE_OSX_SYSROOT=/" from the configure.args. -- Ticket URL: <https://trac.macports.org/ticket/37527> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #37534: fix sparky for tcl/tk 8.6 migration
by MacPorts 05 Jan '13

05 Jan '13

#37534: fix sparky for tcl/tk 8.6 migration -----------------------+-------------------------------- Reporter: howarth@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: sparky -----------------------+-------------------------------- The current sparky packaging is patched to build against tcl/tk 8.5.[[BR]] The attached Portfile.diff and revised sparky-build.diff updates the package to[[BR]] build against the new tcl/tk 8.6 in macports. -- Ticket URL: <https://trac.macports.org/ticket/37534> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #37000: sshfs
by MacPorts 05 Jan '13

05 Jan '13

#37000: sshfs ---------------------------+-------------------------------- Reporter: jonlederman@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ---------------------------+-------------------------------- HI, I am unable to run sshfs, which was installed via macports. When I type the command, I get: sudo echo password | sshfs jon@192.168.2.11:/opt ~/mnt -o dyld: DYLD_ environment variables being ignored because main executable (/usr/bin/sudo) is setuid or setgid dyld: Library not loaded: /opt/local/lib/libfuse.2.dylib Referenced from: /opt/local/bin/sshfs Reason: Incompatible library version: sshfs requires version 11.0.0 or later, but libfuse.2.dylib provides version 10.0.0 Trace/BPT trap: 5 Any help appreciated. Thanks. Jon -- Ticket URL: <https://trac.macports.org/ticket/37000> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #37513: sshfs @2.4_2 install fails due to autoreconf failure
by MacPorts 05 Jan '13

05 Jan '13

#37513: sshfs @2.4_2 install fails due to autoreconf failure -----------------------+-------------------------------- Reporter: orinthe@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: sshfs -----------------------+-------------------------------- OSX 10.8.2, Xcode 4.5.2 w/ Command-line tools installed. sshfs port install fails at configure stage with the following error: {{{ ---> Configuring sshfs Error: org.macports.configure for port sshfs returned: autoreconf failure: command execution failed Please see the log file for port sshfs for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_fuse_sshfs/sshfs/main.log }}} cause appears to be: {{{ configure.ac:3: error: 'AM_CONFIG_HEADER': this macro is obsolete. You should use the 'AC_CONFIG_HEADERS' macro instead. }}} replacing AM_CONFIG_HEADER with AC_CONFIG_HEADERS in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_fuse_sshfs/sshfs/work /sshfs-fuse-2.4/configure.ac appears to resolve the problem. -- Ticket URL: <https://trac.macports.org/ticket/37513> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #37537: qt4-mac and qt4-mac-sqlite3-plugin create trouble
by MacPorts 05 Jan '13

05 Jan '13

#37537: qt4-mac and qt4-mac-sqlite3-plugin create trouble --------------------+---------------------------------------------- Reporter: mk@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: qt4-mac , qt4-mac-sqlite3-plugin --------------------+---------------------------------------------- There are two intertwined scenarios when I ran into trouble with qt4-mac and qt4-mac-sqlite3-plugin: ---- 1) Developing the update of skrooge to version 1.4.0: At first I hadn't qt4-mac-sqlite3-plugin installed during upgrading port skrooge from 1.3.3 to 1.4.0 and here is what I got when I tried to start the app: {{{ QSqlDatabase: QSQLITE driver not loaded QSqlDatabase: available drivers: QSQLITE3 QMYSQL3 QMYSQL QSqlQuery::exec: database not open ##WARNING: PRAGMA table_info( doctransaction ); ## returns :Driver not loaded Driver not loaded }}} Please notice that QSQLITE3 is already listed as available driver!!! BUT, as you can see above it cannot be used. Weird, isn't it? (1) This problem disappeared when I installed port qt4-mac-sqlite3-plugin - which I then added as a necessary dependency for skrooge! '''Nice, but strange, since it caused my 2nd problem... ---- 2) Running tests of kmymoney4-devel with qt4-mac-sqlite3-plugin installed {{{ $ git clone git://anongit.kde.org/kmymoney $ $ cd kmymoney; mkdir build; cd build; cmake .. # this of course only succeeds if kmymoney-devel and all its deps are installed in MacPorts already $ $ ccmake .. # enable test by setting KDE4_BUILD_TESTS to ON $ $ make $ $ /opt/macports-test/bin/ctest --force-new-ctest-process -R databasemgrtest -V UpdateCTestConfiguration from :/Users/marko/WC/GIT/kmymoney.homeview- additional_columns/build/DartConfiguration.tcl UpdateCTestConfiguration from :/Users/marko/WC/GIT/kmymoney.homeview- additional_columns/build/DartConfiguration.tcl Test project /Users/marko/WC/GIT/kmymoney.homeview- additional_columns/build Constructing a list of tests Done constructing a list of tests Checking test dependency graph... Checking test dependency graph end test 20 Start 20: kmymoney-mymoneydatabasemgrtest 20: Test command: /Users/marko/WC/GIT/kmymoney.homeview- additional_columns/build/kmymoney/mymoney/storage/mymoneydatabasemgrtest.app/Contents/MacOS/mymoneydatabasemgrtest 20: Test timeout computed to be: 9.99988e+06 20: ********* Start testing of MyMoneyDatabaseMgrTest ********* 20: Config: Using QTest library 4.8.4, Qt 4.8.4 20: PASS : MyMoneyDatabaseMgrTest::initTestCase() . . . 20: PASS : MyMoneyDatabaseMgrTest::testReparentAccount() 20: QFATAL : MyMoneyDatabaseMgrTest::testAddTransactions() Received signal 11 20: FAIL! : MyMoneyDatabaseMgrTest::testAddTransactions() Received a fatal error. 20: Loc: [Unknown file(0)] 20: Totals: 16 passed, 1 failed, 0 skipped 20: ********* Finished testing of MyMoneyDatabaseMgrTest ********* 1/1 Test #20: kmymoney-mymoneydatabasemgrtest ...***Exception: Other 1.64 sec 0% tests passed, 1 tests failed out of 1 Total Test time (real) = 1.66 sec The following tests FAILED: 20 - kmymoney-mymoneydatabasemgrtest (OTHER_FAULT) Errors while running CTest }}} I haven't tried to check in detail what caused the errors in testAddTransactions() up to now... '''However, if I now deactivate qt4-mac-sqlite3-plugin the test is running fine! ---- This is what I have installed: {{{ $ port installed qt4-mac* The following ports are currently installed: qt4-mac @4.8.4_2+debug+quartz (active) qt4-mac-mysql5-plugin @4.8.4_0+debug (active) qt4-mac-mysql55-plugin @4.8.4_0 (active) qt4-mac-sqlite3-plugin @4.8.4_0 }}} What am I missing? '''What can be done about this seemingly complex situation? ---- (1) [https://bugs.kde.org/show_bug.cgi?id=312668] -- Ticket URL: <https://trac.macports.org/ticket/37537> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5