November 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #35539: libsdl-devel 1.3.0 fails to build on Mountain Lion
by MacPorts 29 Nov '13

29 Nov '13

#35539: libsdl-devel 1.3.0 fails to build on Mountain Lion ------------------------------------------+--------------------------------- Reporter: alexander.heidrich@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: libsdl-devel ------------------------------------------+--------------------------------- sudo port install libsdl-devel gives the following error message: Snowball:Library Alex$ sudo port install libsdl-devel ---> Building libsdl-devel Error: org.macports.build for port libsdl-devel returned: command execution failed This seems to be, however, not a problem directly related to the port but to the new OS X and the Carbon Core API. I have attached the logfile. Thank you! -- Ticket URL: <https://trac.macports.org/ticket/35539> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #33808: libsdl-devel @1.3.0-5552 undefined symbols
by MacPorts 29 Nov '13

29 Nov '13

#33808: libsdl-devel @1.3.0-5552 undefined symbols ---------------------------------------+------------------------------------ Reporter: clemens.brunner@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: libsdl-devel ---------------------------------------+------------------------------------ I tried installing libsdl-devel, but it gives me an error (undefined symbols), see attached log file. I'm using Mac OS X 10.7 with the latest Xcode 4.3.2. -- Ticket URL: <https://trac.macports.org/ticket/33808> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #37733: ffmpeg failure of "port upgrade outdated" after selfupdate
by MacPorts 29 Nov '13

29 Nov '13

#37733: ffmpeg failure of "port upgrade outdated" after selfupdate -------------------------------------------------+------------------------- Reporter: lllactive@… | Owner: macports- Type: defect | tickets@… Priority: Normal | Status: new Component: ports | Milestone: Keywords: ffmpeg, "command execution failed", | Version: 2.1.2 | Port: -------------------------------------------------+------------------------- After successful port 'selfupdate', then 'upgrade outdated': Error: org.macports.build for port ffmpeg returned: command execution failed Error: Failed to install ffmpeg .... Error: The following dependencies were not installed: ffmpeg Error: Unable to upgrade port: 1 Error rebuilding strigi while executing "error "Error rebuilding $portname"" (procedure "revupgrade_scanandrebuild" line 370) invoked from within Logfiles attached: ffmpeg.tar.gz ffmpeg_main-1.log Logfile after "sudo port selfupdate" and "sudo port upgrade outdated" ffmpeg_main-2.log Logfile after "sudo port clean ffmpeg", then "sudo port -s install ffmpeg" ffmpeg_main-3.log Logfile after "sudo port -nR upgrade --force ffmpeg" -- Ticket URL: <https://trac.macports.org/ticket/37733> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 19

[MacPorts] #33706: Wine @ 2.0.4- build failure
by MacPorts 29 Nov '13

29 Nov '13

#33706: Wine @ 2.0.4- build failure --------------------------------+------------------------------------------- Reporter: alkanova@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: Wine --------------------------------+------------------------------------------- I am trying to build wine on 10.7.3 with Xcode 4.1 I get this error with whichever compiler I try: {{{ ---> Computing dependencies for wine ---> Building wine Error: Target org.macports.build returned: shell command failed (see log for details) Log for wine is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_wine/wine/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} -- Ticket URL: <https://trac.macports.org/ticket/33706> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #41584: libbonoboui @2.2.1 +command execution failed
by MacPorts 29 Nov '13

29 Nov '13

#41584: libbonoboui @2.2.1 +command execution failed ----------------------------+-------------------------------- Reporter: brian.c.hill@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: libbonoboui ----------------------------+-------------------------------- OSX 10.9 Xcode 5.0.2 {{{ sudo port install libbonoboui ... ---> Attempting to fetch libbonoboui-2.24.5_7+x11.darwin_13.x86_64.tbz2 from http://lil.fr.packages.macports.org/libbonoboui ---> Fetching distfiles for libbonoboui ---> Verifying checksums for libbonoboui ---> Extracting libbonoboui ---> Configuring libbonoboui ---> Building libbonoboui Error: org.macports.build for port libbonoboui returned: command execution failed }}} {{{ cat /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_libbonoboui/libbonoboui/main.log ... :info:build mv -f .deps/bonobo-ui-engine-config.Tpo .deps/bonobo-ui- engine-config.Plo :info:build mv -f .deps/bonobo-ui-engine.Tpo .deps/bonobo-ui-engine.Plo :info:build mv -f .deps/bonobo-ui-preferences.Tpo .deps/bonobo-ui- preferences.Plo :info:build mv -f .deps/bonobo-ui-sync.Tpo .deps/bonobo-ui-sync.Plo :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_libbonoboui/libbonoboui/work/libbonoboui-2.24.5/bonobo' :info:build make[1]: *** [all-recursive] Error 1 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_libbonoboui/libbonoboui/work/libbonoboui-2.24.5' :info:build make: *** [all] Error 2 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_libbonoboui/libbonoboui/work/libbonoboui-2.24.5' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_libbonoboui/libbonoboui/work/libbonoboui-2.24.5" && /usr/bin/make -j5 -w all :info:build Exit code: 2 :error:build org.macports.build for port libbonoboui returned: command execution failed :debug:build Error code: CHILDSTATUS 54570 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: targets not executed for libbonoboui: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port libbonoboui for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_libbonoboui/libbonoboui/main.log }}} -- Ticket URL: <https://trac.macports.org/ticket/41584> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #41337: py-cartopy @0.9.0: new port submission
by MacPorts 29 Nov '13

29 Nov '13

#41337: py-cartopy @0.9.0: new port submission -----------------------------+-------------------------------- Reporter: Peter.Danecek@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: py-cartopy -----------------------------+-------------------------------- This port should go to python/py-cartopy (some details below). Please comment or commit. {{{ py-cartopy @0.9.0 (python, science, gis, graphics) Sub-ports: py27-cartopy Description: Cartopy is a Python package designed to make drawing maps for data analysis and visualisation as easy as possible. It makes use of the powerful PROJ.4, numpy and shapely libraries and has a simple and intuitive drawing interface to matplotlib for creating publication quality maps. Homepage: http://scitools.org.uk/cartopy/ Library Dependencies: py27-cartopy Platforms: darwin License: LGPL3 Maintainers: Peter.Danecek(a)bo.ingv.it, openmaintainer(a)macports.org }}} The dependencies try to respect the recommendations from developers list, i.e. `depend_build` are taken from `setup.py`, python modules are only `depend_run` and `depend_lib` describes linking of *.so extension files: {{{ Build Dependencies: py27-setuptools, py27-cython, py27-numpy Library Dependencies: python27, proj, geos Runtime Dependencies: py27-numpy, py27-scipy, py27-matplotlib, py27-shapely, py27-pyshp, py27-nose, py27-pep8, py27-mock, py27-pil }}} -- Ticket URL: <https://trac.macports.org/ticket/41337> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #41499: py26-pyke @1.1.1: make it a unified py-pyke port
by MacPorts 28 Nov '13

28 Nov '13

#41499: py26-pyke @1.1.1: make it a unified py-pyke port -----------------------------+-------------------------------- Reporter: Peter.Danecek@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: haspatch | Port: py-pyke py26-pyke -----------------------------+-------------------------------- I propose to use the unified PortGroup for this port to add `py27` and `py3x` to it. Some time ago I created such a unified port, because I needed it as a dependence. I than realised that the `py26-pyke` version already exists. The differences are minor, but I propose some changes (as detailed below) here so I just submit my `Portfile` as is for review, I can provide diffs if this is considered useful in this case (`py26-pyke` is to be replaces `py-pyke`). The maintainer probably should stay with `mahergamal(a)gmail.com`. The differences are: - use unified PortGroup; - add py27 py32 py33 py34 - add `license` and `supported_archs noarch`; - the description is slightly different; - remove lib dependency; The dependency `htmltemplate` is used only for examples, so it should not be a dependency (or at best a `depends_run`). -- Ticket URL: <https://trac.macports.org/ticket/41499> MacPorts <http://www.macports.org/> Ports system for OS X

1 6

[MacPorts] #41590: port bamtools
by MacPorts 28 Nov '13

28 Nov '13

#41590: port bamtools -------------------------+-------------------------------- Reporter: pengyu.ut@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: -------------------------+-------------------------------- [https://github.com/pezmaster31/bamtools] -- Ticket URL: <https://trac.macports.org/ticket/41590> MacPorts <http://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #41581: Putty @0.63 Xft2 build failure
by MacPorts 28 Nov '13

28 Nov '13

#41581: Putty @0.63 Xft2 build failure ----------------------+-------------------------------- Reporter: dazzur@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: putty ----------------------+-------------------------------- OS: OSX Mavericks 10.9 MacPorts = Fresh / New MacPorts install Command issued: '''sudo port install putty''' Output: {{{ ---> Computing dependencies for putty ---> Dependencies to be installed: gtk2 pango Xft2 harfbuzz graphite2 cmake libidn shared-mime-info intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-list-utils p5.12-xml-parser xorg- libXcomposite xorg-compositeproto xorg-libXfixes xorg-fixesproto xorg- libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto ---> Building Xft2 Error: org.macports.build for port Xft2 returned: command execution failed Error: Failed to install Xft2 Please see the log file for port Xft2 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/main.log Error: The following dependencies were not installed: gtk2 pango Xft2 harfbuzz graphite2 cmake libidn shared-mime-info intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-list-utils p5.12-xml-parser xorg-libXcomposite xorg-compositeproto xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg- libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port putty failed }}} LOG FILE OUTPUT {{{ version:1 :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 502 :debug:main Executing org.macports.main (Xft2) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.archivefetch (Xft2) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (Xft2) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (Xft2) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (Xft2) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (Xft2) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (Xft2) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Thu Nov 28 20:11:50 EST 2013 :notice:build ---> Building Xft2 :debug:build Executing org.macports.build (Xft2) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.9' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1" && /usr/bin/make -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1" && /usr/bin/make -j2 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1' :info:build /Applications/Xcode.app/Contents/Developer/usr/bin/make all- recursive :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1' :info:build Making all in man :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1/man' :info:build make[2]: Nothing to be done for `all'. :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1/man' :info:build Making all in src :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1/src' :info:build CC xftglyphs.lo :info:build xftglyphs.c:24:10: fatal error: 'freetype/ftoutln.h' file not found :info:build #include <freetype/ftoutln.h> :info:build ^ :info:build 1 error generated. :info:build make[2]: *** [xftglyphs.lo] Error 1 :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1/src' :info:build make[1]: *** [all-recursive] Error 1 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1' :info:build make: *** [all] Error 2 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/work/libXft-2.3.1" && /usr/bin/make -j2 -w all :info:build Exit code: 2 :error:build org.macports.build for port Xft2 returned: command execution failed :debug:build Error code: CHILDSTATUS 34406 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: targets not executed for Xft2: org.macports.activate org.macports.build org.macports.destroot org.macports.install :error:build Failed to install Xft2 :debug:build couldn't open "/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex": no such file or directory while executing "open [file join $dir tclIndex]" :notice:build Please see the log file for port Xft2 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_Xft2/Xft2/main.log }}} -- Ticket URL: <https://trac.macports.org/ticket/41581> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #41587: opencv@2.4.7_1 cannot remove qt4 variant...
by MacPorts 28 Nov '13

28 Nov '13

#41587: opencv(a)2.4.7_1 cannot remove qt4 variant... ---------------------+-------------------------------- Reporter: dllau@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: ---------------------+-------------------------------- I'm trying to install opencv without the qt4 variant. I use the typical -qt4 flag, but listing the variants of the install packages show that qt4 is still there. Any one else see this? -- Ticket URL: <https://trac.macports.org/ticket/41587> MacPorts <http://www.macports.org/> Ports system for OS X

1 2