November 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #30599: h2ph not rerun after perl5 upgrade
by MacPorts 12 Nov '13

12 Nov '13

#30599: h2ph not rerun after perl5 upgrade ---------------------------------+------------------------------------------ Reporter: vinc17@… | Owner: ricci@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.1 Keywords: | Port: perl5 ---------------------------------+------------------------------------------ When I upgraded perl5 to 5.12, the modules were automatically reinstalled as there revision was increased, but h2ph was not rerun (this is needed by p5-filesys-diskspace). Everything went apparently fine, without error messages, and this module silently became unusable for this obscure reason. It took me some time to debug this, as the error message when using this module was just: Cannot use df on this machine (untested or unsupported). The h2ph command should have been rerun or there should have been a clear message at the end. -- Ticket URL: <https://trac.macports.org/ticket/30599> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #36980: perl5.14 sitebin & vendorbin flags may be inapproriate
by MacPorts 12 Nov '13

12 Nov '13

#36980: perl5.14 sitebin & vendorbin flags may be inapproriate ---------------------+-------------------------------- Reporter: derek@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: perl5.14 ---------------------+-------------------------------- In revision r94655, the flags sitebin and vendorbin were added, and point to ${prefix}/libexec/perl5.14/sitebin. But the GNU coding standards state that libexec is "The directory for installing executable programs to be run by other programs rather than by users." Thus any perl modules that produce a script or binary executable and don't override these defaults with an INSTALLSITEBIN=/opt/local/bin (for EU::MM modules) & INSTALLSITESCRIPT will write their executables to a directory that is probably not in their path. I'm not sure if that is the intended behavior that motivated that change, but thought I'd check. In particular I was thinking of the Perl Data Language scripts & executables 'pdl', 'perldl', 'pdl2' & 'pdldoc', which ended up in libexec. But it may also be the case for modules. I also have a 're.pl' and a 'moose-outdated' in my libexec, which may be the correct location for them, I'm not sure. -- Ticket URL: <https://trac.macports.org/ticket/36980> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 13

[MacPorts] #41324: Bug in qt4-mac
by MacPorts 12 Nov '13

12 Nov '13

#41324: Bug in qt4-mac ----------------------+-------------------------------- Reporter: dosiek@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: qt4-mac | Port: qt4-mac ----------------------+-------------------------------- Line 622 of port file says } elseif {${MINOR} = "9"} { It should say } elseif {${MINOR} == "9"} { -- Ticket URL: <https://trac.macports.org/ticket/41324> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #23143: Add ActiveMQ to Macports.
by MacPorts 12 Nov '13

12 Nov '13

#23143: Add ActiveMQ to Macports. --------------------------------------+------------------------------------- Reporter: brian.gupta@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: --------------------------------------+------------------------------------- Could we get this Apache Project message queuing server software added to MacPorts.. http://activemq.apache.org/ The latest version, 5.3, can be downloaded here: http://activemq.apache.org/activemq-530-release.html Please let me know if you have any questions, or need any help. -- Ticket URL: <http://trac.macports.org/ticket/23143> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #18881: AFFLIB / FUSE
by MacPorts 12 Nov '13

12 Nov '13

#18881: AFFLIB / FUSE -----------------------------------+---------------------------------------- Reporter: macports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: AFFLIB FUSE | Port: AFFLIB -----------------------------------+---------------------------------------- Would it be possible to get the FUSE variant of AFFLIB working? I'm attempting to use "affuse" from that package and get an error that FUSE isn't installed. Web support indicates that the FUSE developer files need to be installed before we complie AFFLIB. I edited the AFFLIB Portfile to enable the FUSE variant, and installed. I get the following output: {{{ configure: FUSE requested checking fuse.h usability... no checking fuse.h presence... no checking for fuse.h... no configure: fuse.h not found; Disabling FUSE support. }}} I do have MacFuse 1.7.1 installed, and fuse.h is in /opt/local/include. I'm willing to do legwork to get it going but am at the end of my current capabilities. Thanks. -- Ticket URL: <http://trac.macports.org/ticket/18881> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #17540: poppler conflicts with xpdf
by MacPorts 12 Nov '13

12 Nov '13

#17540: poppler conflicts with xpdf ----------------------------+----------------------------------------------- Reporter: gale@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ----------------------------+----------------------------------------------- poppler 0.10.1 cannot be installed simultaneously with xpdf 3.02 because there are many files that both ports try to install. poppler advertises itself as "based on the xpdf code base". If so, it should depend on xpdf instead of installing some of xpdf's files itself. Better yet, create an xpdf-tools port that contains the files common to both. The list of conflicting files is: /opt/local/bin/pdffonts /opt/local/bin/pdfimages /opt/local/bin/pdfinfo /opt/local/bin/pdftoppm /opt/local/bin/pdftops /opt/local/bin/pdftotext /opt/local/share/man/man1/pdffonts.1.gz /opt/local/share/man/man1/pdfimages.1.gz /opt/local/share/man/man1/pdfinfo.1.gz /opt/local/share/man/man1/pdftoppm.1.gz /opt/local/share/man/man1/pdftops.1.gz /opt/local/share/man/man1/pdftotext.1.gz -- Ticket URL: <http://trac.macports.org/ticket/17540> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 28

[MacPorts] #41325: Error: org.macports.build for port perl5.8 returned: command execution failed
by MacPorts 12 Nov '13

12 Nov '13

#41325: Error: org.macports.build for port perl5.8 returned: command execution failed -------------------------------+-------------------------------- Reporter: chema.torrelles@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: -------------------------------+-------------------------------- In a machine, upgraded to Maverick (from Snow Leopard), after installing Xcode 5.0.1 and command line tools I have this error: ---> Fetching distfiles for perl5.8 ---> Verifying checksums for perl5.8 ---> Extracting perl5.8 ---> Applying patches to perl5.8 ---> Configuring perl5.8 ---> Building perl5.8 Error: org.macports.build for port perl5.8 returned: command execution failed Please see the log file for port perl5.8 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_perl5.8/perl5.8/main.log Error: Unable to upgrade port: 1 I am attaching the main.log Thanks -- Ticket URL: <https://trac.macports.org/ticket/41325> MacPorts <http://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #20027: perl5.8 build failure
by MacPorts 12 Nov '13

12 Nov '13

#20027: perl5.8 build failure -----------------------------+---------------------------------------------- Reporter: uttam@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: -----------------------------+---------------------------------------------- When I tried to "sudo port install wine", it gave an error that 'perl5.8' build failed. The output is attached with the attachment. Versions of: Mac OS X: 10.5.7 Macports: 1.710 Xcode: 3.1.2 -- Ticket URL: <http://trac.macports.org/ticket/20027> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 10

[MacPorts] #40852: qt4-mac does not build on OS X 10.9 Mavericks or later
by MacPorts 12 Nov '13

12 Nov '13

#40852: qt4-mac does not build on OS X 10.9 Mavericks or later -------------------------+-------------------------------- Reporter: kolyosick@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: -------------------------+-------------------------------- Error: qt4-mac does not build on OS X 10.9 Mavericks or later. Error: org.macports.fetch for port qt4-mac returned: unsupported platform -- Ticket URL: <https://trac.macports.org/ticket/40852> MacPorts <http://www.macports.org/> Ports system for OS X

1 60

[MacPorts] #40874: dvdrtools fails because of missing -lIOKit on Mavericks
by MacPorts 12 Nov '13

12 Nov '13

#40874: dvdrtools fails because of missing -lIOKit on Mavericks ------------------------------+-------------------------------- Reporter: tknox@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: mavericks, iokit | Port: dvdrtools ------------------------------+-------------------------------- Trying to install dvdrtools on Mavericks fails because macports can't find IOKit: {{{ ---> Fetching distfiles for dvdrtools ---> Verifying checksums for dvdrtools ---> Checksumming dvdrtools-0.2.1.tar.gz ---> Extracting dvdrtools ---> Extracting dvdrtools-0.2.1.tar.gz ---> Applying patches to dvdrtools ---> Applying patch-scsi-mac-iokit.c patching file libscg/scsi-mac-iokit.c ---> Applying patch-cdda2wav-cdda2wav.c patching file cdda2wav/cdda2wav.c ---> Applying patch-cdrecord-cdrecord.c patching file cdrecord/cdrecord.c ---> Configuring dvdrtools checking build system type... i686-apple-darwin13.0.0 checking host system type... i686-apple-darwin13.0.0 checking target system type... i686-apple-darwin13.0.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking for gcc... /usr/bin/clang checking for C compiler default output file name... configure: error: C compiler cannot create executables See `config.log' for more details. Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdrtools/dvdrtools/work/dvdrtools-0.2.1" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man Exit code: 77 Error: Failed to configure dvdrtools, consult /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdrtools/dvdrtools/work/dvdrtools-0.2.1/config.log Error: org.macports.configure for port dvdrtools returned: configure failure: command execution failed Warning: targets not executed for dvdrtools: org.macports.destroot org.macports.configure org.macports.build Please see the log file for port dvdrtools for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdrtools/dvdrtools/main.log Error: Unable to upgrade port: 1 Thomass-iMac:~ tdknox$ cat /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdrtools/dvdrtools/main.log version:1 (stuff) :info:configure checking for C compiler default output file name... configure: error: C compiler cannot create executables :info:configure See `config.log' for more details. :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdrtools/dvdrtools/work/dvdrtools-0.2.1" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man :info:configure Exit code: 77 :error:configure Failed to configure dvdrtools, consult /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdrtools/dvdrtools/work/dvdrtools-0.2.1/config.log :error:configure org.macports.configure for port dvdrtools returned: configure failure: command execution failed :debug:configure Error code: NONE :debug:configure Backtrace: configure failure: command execution failed while executing "$procedure $targetname" :info:configure Warning: targets not executed for dvdrtools: org.macports.destroot org.macports.configure org.macports.build :notice:configure Please see the log file for port dvdrtools for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdrtools/dvdrtools/main.log Thomass-iMac:~ tdknox$ cat /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdrtools/dvdrtools/work/dvdrtools-0.2.1/config.log This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. (stuff) configure:2195: checking for C compiler default output file name configure:2198: /usr/bin/clang -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c -lIOKit -framework CoreFoundation >&5 ld: library not found for -lIOKit clang: error: linker command failed with exit code 1 (use -v to see invocation) Thomass-iMac:~ tdknox$ locate IOKit | grep lib /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.8.sdk/System/Library/Frameworks/IOKit.framework/Versions/A/Resources/BridgeSupport/IOKit.dylib /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.8.sdk/usr/lib/libIOKit.A.dylib /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.8.sdk/usr/lib/libIOKit.dylib /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS7.0.sdk/usr/lib/libTelephonyIOKitDynamic.dylib /System/Library/Frameworks/IOKit.framework/Versions/A/Resources/BridgeSupport/IOKit.dylib }}} -- Ticket URL: <https://trac.macports.org/ticket/40874> MacPorts <http://www.macports.org/> Ports system for OS X

1 3