November 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #38744: Maxima .28.0_3 +printable_doc does not build
by MacPorts 11 Jul '14

11 Jul '14

#38744: Maxima .28.0_3 +printable_doc does not build ---------------------------+-------------------------------- Reporter: macosx12345@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: maxima ---------------------------+-------------------------------- On Mac OS 10.8 with MacPorts 2.1.3, maxima @5.28.0_3+printable_doc's build process stops in the (sub)directory `interfaces/emacs/imaxima` while making target `pdf` (see messages below). Workaround to finish the build and the installation: {{{ cd `port work maxima` cd maxima-5.28.0/interfaces/emacs/imaxima sudo make pdf # resume installation: sudo port install maxima +printable_doc }}} The error message during the original build (excerpt from the build log): {{{ [...] Making pdf in imaxima make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_maxima/maxima/work/maxima-5.28.0/interfaces/emacs/imaxima' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/sh /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_maxima/maxima/work/maxima-5.28.0/missing --run makeinfo -I .' \ texi2dvi --pdf --batch imaxima.texi sed: RE error: illegal byte sequence make[3]: *** [imaxima.pdf] Error 1 make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_maxima/maxima/work/maxima-5.28.0/interfaces/emacs/imaxima' make[2]: *** [pdf-recursive] Error 1 make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_maxima/maxima/work/maxima-5.28.0/interfaces/emacs' make[1]: *** [pdf-recursive] Error 1 make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_maxima/maxima/work/maxima-5.28.0/interfaces' make: *** [pdf-recursive] Error 1 make: *** Waiting for unfinished jobs.... pattern=`printf "\t"` ; \ bad_files=`find . -name '*.texi' -print | xargs /usr/bin/grep -E -l -e "$pattern"` ; \ [ -z "$bad_files" ] || ( echo "WARNING: The following files have unexpanded Tabs: $bad_files" ; \ echo "Run /doc/info/fix_tab to fix the problem." ) make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_maxima/maxima/work/maxima-5.28.0/doc/info' [...] Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_maxima/maxima/work/maxima-5.28.0" && /usr/bin/make -j8 -w all pdf Exit code: 2 Error: org.macports.build for port maxima returned: command execution failed [...] }}} Performing make pdf ``by hand'' (outside of the automated build process) works, probably because of the use of a different environment. -- Ticket URL: <https://trac.macports.org/ticket/38744> MacPorts <http://www.macports.org/> Ports system for OS X

1 11

[MacPorts] #34737: deluge: Fatal Python error: Interpreter not initialized (version mismatch?)
by MacPorts 10 Jul '14

10 Jul '14

#34737: deluge: Fatal Python error: Interpreter not initialized (version mismatch?) -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: devans@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.1 Keywords: | Port: deluge -------------------------------------+-------------------------------------- I can't install deluge. See attached log. -- Ticket URL: <https://trac.macports.org/ticket/34737> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #39430: deluge @1.3.6 +python27: deluge-gtk-2.7 fails to start with "import error"
by MacPorts 10 Jul '14

10 Jul '14

#39430: deluge @1.3.6 +python27: deluge-gtk-2.7 fails to start with "import error" -----------------------+-------------------------------- Reporter: bitmail@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: deluge -----------------------+-------------------------------- System: OSX 10.5.8, PPC, Macports 2.1.3 fully updated. Installation of Deluge @1.3.6 +python2.7 works fine. However starting the GTK interface fails: {{{ deluge-gtk-2.7 Traceback (most recent call last): File "/opt/local/bin/deluge-gtk-2.7", line 9, in <module> load_entry_point('deluge==1.3.6', 'gui_scripts', 'deluge-gtk')() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7 /site-packages/deluge/ui/gtkui/gtkui.py", line 115, in start Gtk().start() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7 /site-packages/deluge/ui/gtkui/gtkui.py", line 112, in start GtkUI(self.args) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7 /site-packages/deluge/ui/gtkui/gtkui.py", line 201, in __init__ import gtk_osxapplication ImportError: No module named gtk_osxapplication }}} Previous versions (f.e. 1.3.5) worked fine. I didn't use it in a while, so I don't know exactly when it broke and if it's due to the update to 1.3.6 or some dependency. I did uninstall deluge and reinstall it, to no avail. -- Ticket URL: <https://trac.macports.org/ticket/39430> MacPorts <http://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #41579: sbcl/maxima fail building/installing on Mavericks
by MacPorts 10 Jul '14

10 Jul '14

#41579: sbcl/maxima fail building/installing on Mavericks --------------------------------+-------------------------------- Reporter: holger.waechtler@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: --------------------------------+-------------------------------- The symbolic math package maxima and/or it's prerequisite sbcl fail to build on Mavericks. Log attached. -- Ticket URL: <https://trac.macports.org/ticket/41579> MacPorts <http://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #37218: cyrus-sasl2: always links to kerberos5 even with -kerberos variant
by MacPorts 10 Jul '14

10 Jul '14

#37218: cyrus-sasl2: always links to kerberos5 even with -kerberos variant ----------------------+------------------------- Reporter: raimue@… | Owner: jmpp@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: cyrus-sasl2 ----------------------+------------------------- The cyrus-sasl2 port has a +kerberos variant that is supposed to enable linking with kerberos5. However, it fails to prevent linking to kerberos5 when the kerberos5 port is active but the variant is not selected. {{{ $ sudo port install cyrus-sasl2 -kerberos ... $ port installed cyrus-sasl2 and active The following ports are currently installed: cyrus-sasl2 @2.1.25_3 (active) $ otool -L /opt/local/sbin/saslauthd /opt/local/sbin/saslauthd: /opt/local/lib/libgssapi_krb5.2.2.dylib (compatibility version 2.0.0, current version 2.2.0) /opt/local/lib/libkrb5.3.3.dylib (compatibility version 3.0.0, current version 3.3.0) /opt/local/lib/libk5crypto.3.1.dylib (compatibility version 3.0.0, current version 3.1.0) /opt/local/lib/libcom_err.3.0.dylib (compatibility version 3.0.0, current version 3.0.0) /opt/local/lib/libkrb5support.1.1.dylib (compatibility version 1.0.0, current version 1.1.0) /usr/lib/libresolv.9.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libpam.2.dylib (compatibility version 3.0.0, current version 3.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) $ port provides /opt/local/lib/libkrb5.3.3.dylib /opt/local/lib/libkrb5.3.3.dylib is provided by: kerberos5 }}} This port probably needs `configure.cflags --disable-gssapi` as the default case which should then be replaced with the corresponding `--enable-gssapi=...` in the variant. -- Ticket URL: <https://trac.macports.org/ticket/37218> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #41246: Aubio doesn't compile under OS X 10.9
by MacPorts 09 Jul '14

09 Jul '14

#41246: Aubio doesn't compile under OS X 10.9 ---------------------------+-------------------------------- Reporter: philmassart@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: aubio ---------------------------+-------------------------------- Since the release of Mac OS 10.9 Mavericks, upgrading aubio is impossible. That's not a huge problem for "already installed" ports ("upgrade outdated" command doesn't go further, so it might be necessary to upgrade other ports by naming them) but it's a problem for people trying to install it for the first time -- Ticket URL: <https://trac.macports.org/ticket/41246> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #21806: Wireshark no_x11 installs without GUI
by MacPorts 09 Jul '14

09 Jul '14

#21806: Wireshark no_x11 installs without GUI --------------------------------------+------------------------------------- Reporter: lkraider+ports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: --------------------------------------+------------------------------------- I have gtk2 installed as +no_x11 +quartz -x11 After trying to install wireshark, it builds without gui, because no_x11 disables gtk2 in its Portfile. Trying to set -no_x11 doesn't work since gtk2 is already built with it enabled, and port returns an error for that. Since the build works fine with gtk2 +no_x11, I propose the '''no_x11''' be renamed to '''no_gui''' on the wireshark Portfile. -- Ticket URL: <http://trac.macports.org/ticket/21806> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #41054: fhist @1.16 fails to build on 10.9
by MacPorts 09 Jul '14

09 Jul '14

#41054: fhist @1.16 fails to build on 10.9 ---------------------+-------------------------------- Reporter: ralph@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: ---------------------+-------------------------------- Last part of the log reads {{{ :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_fhist/fhist/work/fhist-1.16" && /usr/bin/make -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_fhist/fhist/work/fhist-1.16' :info:build /usr/bin/clang -pipe -Os -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 -Icommon -Icommon -c common/input.c :info:build clang: warning: -Wl,-headerpad_max_install_names: 'linker' input unused :info:build clang: warning: argument unused during compilation: '-L/opt/local/lib' :info:build common/input.c:37:1: error: redefinition of a 'extern inline' function 'input_name' is not supported in C99 mode :info:build input_name(input_ty *fp) :info:build ^ :info:build common/input.h:78:29: note: previous definition is here :info:build extern __inline const char *input_name(input_ty *fp) :info:build ^ :info:build common/input.c:54:1: error: redefinition of a 'extern inline' function 'input_length' is not supported in C99 mode :info:build input_length(input_ty *fp) :info:build ^ :info:build common/input.h:80:22: note: previous definition is here :info:build extern __inline long input_length(input_ty *fp) :info:build ^ :info:build common/input.c:71:1: error: redefinition of a 'extern inline' function 'input_ftell' is not supported in C99 mode :info:build input_ftell(input_ty *fp) :info:build ^ :info:build common/input.h:82:22: note: previous definition is here :info:build extern __inline long input_ftell(input_ty *fp) :info:build ^ :info:build common/input.c:88:1: error: redefinition of a 'extern inline' function 'input_read' is not supported in C99 mode :info:build input_read(input_ty *fp, void *data, long len) :info:build ^ :info:build common/input.h:71:22: note: previous definition is here :info:build extern __inline long input_read(input_ty *fp, void *data, long len) :info:build ^ :info:build common/input.c:171:1: error: redefinition of a 'extern inline' function 'input_getc' is not supported in C99 mode :info:build input_getc(input_ty *fp) :info:build ^ :info:build common/input.h:75:21: note: previous definition is here :info:build extern __inline int input_getc(input_ty *fp) { if (fp->pushback_len > :info:build ^ :info:build 5 errors generated. :info:build make: *** [common/input.o] Error 1 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_fhist/fhist/work/fhist-1.16' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_fhist/fhist/work/fhist-1.16" && /usr/bin/make -w all :info:build Exit code: 2 :error:build org.macports.build for port fhist returned: command execution failed }}} -- Ticket URL: <https://trac.macports.org/ticket/41054> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #41623: bugs install ee
by MacPorts 09 Jul '14

09 Jul '14

#41623: bugs install ee -----------------------------+-------------------------------- Reporter: swordfish1975@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: -----------------------------+-------------------------------- problem arose when installing port ee : version:1 :debug:main ee has no conflicts :debug:main Executing org.macports.main (ee) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 20 :debug:main euid changed to: 502 :debug:main Skipping completed org.macports.archivefetch (ee) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (ee) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (ee) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (ee) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (ee) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (ee) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Sun Dec 1 01:32:26 KRAT 2013 :notice:build ---> Building ee :debug:build Executing org.macports.build (ee) :debug:build port disallows a parallel build :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_ee/ee/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.9' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_ee/ee/work/easyedit-1.4.6" && /usr/bin/make -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_ee/ee/work/easyedit-1.4.6" && /usr/bin/make -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_ee/ee/work/easyedit-1.4.6' :info:build Neither termio.h or sgtty.h are on this system! :info:build Don't know where to find curses, you'll need to modify :info:build source code to be able to build! :info:build :info:build Modify the file make.default and build ee by typing: :info:build :info:build make -f make.default :info:build :info:build make: *** [localmake] Error 1 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_ee/ee/work/easyedit-1.4.6' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_ee/ee/work/easyedit-1.4.6" && /usr/bin/make -w all :info:build Exit code: 2 :error:build org.macports.build for port ee returned: command execution failed :debug:build Error code: CHILDSTATUS 906 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: targets not executed for ee: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port ee for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_ee/ee/main.log -- Ticket URL: <https://trac.macports.org/ticket/41623> MacPorts <http://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #40756: mcabber @0.9.10 and libotr @3.2.1 are outdated.
by MacPorts 08 Jul '14

08 Jul '14

#40756: mcabber @0.9.10 and libotr @3.2.1 are outdated. ---------------------------------+---------------------------------------- Reporter: christoph_murauer@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: mcabber, loudmouth, libotr ---------------------------------+---------------------------------------- Hello ! There is a newer version of mcabber (0.10.2) available on http://mcabber.com. There is also a patched version of loudmouth available on the same site (don't know whats the difference between the other used version of loudmouth). There is also a newer version of libotr (which is a dep. for OTR) available. I find no maintainer for loudmouth and libotr - please add the required people - thanks. Thanks for updating. -- Ticket URL: <https://trac.macports.org/ticket/40756> MacPorts <http://www.macports.org/> Ports system for OS X

1 10