February 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #38031: Adding RTL-DSR to gnuradio-companion fails to include new input sources
by MacPorts 17 Feb '13

17 Feb '13

#38031: Adding RTL-DSR to gnuradio-companion fails to include new input sources ------------------------------+-------------------------------- Reporter: whaleyweb00@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: gnuradio rtl-sdr | Port: gnuradio rtl-sdr ------------------------------+-------------------------------- Hi, I am new with both Macports and gnuradio so the problem could be me, but.... My first attempt to install gnuradio did not succeed. The install script completed without error, but not all the components were compiled and copied to the /opt/local paths. No clue as to why. After reading other posts, I tried 'sudo port install gnuradio +full' which worked and installed all the components. I then installed rtl-sdr with: 'sudo port install rtl-sdr' which quit with a qwt52 error since qwt was already present. I uninstalled qwt with a 'sudo port uninstall qwt' and that worked. The 2nd time I installed rtl-dsr ran with only a couple of qwt52 dependency warnings. The rtl-sdr binaries compiled and are functional. However, I'd like to get the gnuradio-companion app to add the RTL-SDR input sources, but all that is there are the default input sources. So my question is, how do I get gnuradio-companion to recognize the new input sources provided by RTL-SDR? Any help is appreciated. Thanks, Greg -- Ticket URL: <https://trac.macports.org/ticket/38031> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #38087: ocaml @4.00.1 emacs variant for installing .el files
by MacPorts 17 Feb '13

17 Feb '13

#38087: ocaml @4.00.1 emacs variant for installing .el files -------------------------------+-------------------------------- Reporter: inouetakahiroki@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: ocaml -------------------------------+-------------------------------- The ocaml distribution contains emacs support .el files. They are not installed by current port, and nor has variant to install it. This enhancement introduces emacs variant to ocaml port. This variant installs the .el files into ${prefix}/share/emacs/site-lisp -- Ticket URL: <https://trac.macports.org/ticket/38087> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #38083: gtk3: use require_active_variants like gtk2 does
by MacPorts 16 Feb '13

16 Feb '13

#38083: gtk3: use require_active_variants like gtk2 does --------------------------+------------------- Reporter: ryandesign@… | Owner: cal@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: haspatch | Port: gtk3 --------------------------+------------------- I fixed gtk2 to use require_active_variants. Then I wanted to make gtk3 do the same. Then I realized gtk3 was already using require_active_variants but slightly differently. This patch updates gtk3 to do it the way gtk2 now does. There is a slight change in behavior: previously, gtk3+quartz could not be installed if pango+quartz+x11 was installed; it required pango+quartz (without +x11). Was this restriction necessary? If not, we should remove it, as in the attached patch. If the restriction really was necessary, I'm guessing we should add it to gtk2 as well. There was no corresponding restriction for +x11. The port already allowed gtk3+x11 to be installed if pango+quartz+x11 was installed, and this patch doesn't change that. -- Ticket URL: <https://trac.macports.org/ticket/38083> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #38085: vim +python33 (or 31, 32) builds without Python support on Snow Leopard
by MacPorts 16 Feb '13

16 Feb '13

#38085: vim +python33 (or 31, 32) builds without Python support on Snow Leopard ------------------------------+-------------------------------- Reporter: alexey.muranov@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: vim ------------------------------+-------------------------------- If i try to install vim with Python 3 support on Snow Leopard, for example {{{ port install vim +python33 }}} i get a working Vim but without Python support (typing `:python` gives "E319: Sorry, the command is not available in this version"). The variant `+python27` works fine. -- Ticket URL: <https://trac.macports.org/ticket/38085> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #37799: vim +ruby19 does not work
by MacPorts 16 Feb '13

16 Feb '13

#37799: vim +ruby19 does not work ------------------------------+-------------------------------- Reporter: alexey.muranov@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: ruby19 | Port: vim ------------------------------+-------------------------------- I cannot get a working vim +ruby19 variant. If i install it with {{{ port install vim +ruby19 }}} when i run vim, i get {{{ dyld: Symbol not found: _environ Referenced from: /opt/local/lib/libruby.1.9.1.dylib Expected in: flat namespace in /opt/local/lib/libruby.1.9.1.dylib zsh: trace trap vim }}} This is on Snow Leopard. I do not have ruby 1.8 port installed. -- Ticket URL: <https://trac.macports.org/ticket/37799> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #38079: Patchfiles to fix the html-xml-utils port
by MacPorts 16 Feb '13

16 Feb '13

#38079: Patchfiles to fix the html-xml-utils port ---------------------+-------------------------------- Reporter: david@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: html-xml-utils ---------------------+-------------------------------- This fix contains to patch files. One patch is for the Portfile. The other patch should be dropped into the files directory. The second patch adds a #define min to the hxindex.c file. If there's a better way to ensure the min function is available, then please update the Portfile accordingly. -- Ticket URL: <https://trac.macports.org/ticket/38079> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #38071: fish @1.23.1_5 +xsel: should depend on xsel port instead of installing its own
by MacPorts 16 Feb '13

16 Feb '13

#38071: fish @1.23.1_5 +xsel: should depend on xsel port instead of installing its own ----------------------+---------------------- Reporter: larryv@… | Owner: larryv@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: fish ----------------------+---------------------- fish +xsel currently installs `${prefix}/bin/xsel` and declares a conflict with MacPorts’ xsel. The fish port should be changed to use MacPorts’ xsel and never install its own. -- Ticket URL: <https://trac.macports.org/ticket/38071> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #35477: denyhosts exits (2) in MacOS X 10.8 (Mountain Lion)
by MacPorts 16 Feb '13

16 Feb '13

#35477: denyhosts exits (2) in MacOS X 10.8 (Mountain Lion) ------------------------------------------+--------------------------------- Reporter: ktekinay@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: 10.8 denyhosts moutain lion | Port: denyhosts ------------------------------------------+--------------------------------- denyhosts exits with error 2 in Mountain Lion. It loads, then abruptly exits without listing a reason in the log. This had been working flawlessly for years, and nothing has changed other than upgrading to Mountain Lion and upgrading MacPorts. -- Ticket URL: <https://trac.macports.org/ticket/35477> MacPorts <http://www.macports.org/> Ports system for Mac OS

2 8

[MacPorts] #31148: gimp @2.6.11 +animation +quartz: compiling gtk2 failed
by MacPorts 16 Feb '13

16 Feb '13

#31148: gimp @2.6.11 +animation +quartz: compiling gtk2 failed ------------------------------------+--------------------------------------- Reporter: macports.org@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.2 Keywords: gimp quartz gkt2 pango | Port: ------------------------------------+--------------------------------------- To update to Lion I uninstalled and cleaned all ports: {{{ # port -fp uninstall --follow-dependents installed Error: No ports matched the given expression # port selfupdate ---> Updating MacPorts base sources using rsync MacPorts base version 2.0.2 installed, MacPorts base version 2.0.2 downloaded. ---> Updating the ports tree ---> MacPorts base is already the latest version The ports tree has been updated. To upgrade your installed ports, you should run port upgrade outdated # port upgrade outdated Error: No ports matched the given expression }}} So after wiping the slate clean, I started to install perl and then gimp {{{ bash-3.2# port install perl5 ... bash-3.2# port install gimp +animation +quartz ---> Computing dependencies for gimp ---> Dependencies to be installed: gimp-app gimp2 aalib autoconf help2man gettext expat expat libiconv gperf libiconv ncurses ncursesw gettext p5.12 -locale-gettext m4 automake libtool curl curl-ca-bundle libidn openssl zlib pkgconfig glib2 glib2 gegl babl librsvg cairo fontconfig freetype bzip2 fontconfig libpixman libpng xorg-xcb-util xorg-libxcb python27 db46 python_select readline sqlite3 python27 xorg-libXau xorg-xproto xorg- libXdmcp xorg-libpthread-stubs xorg-xcb-proto libxml2 libxml2 xrender xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-util- macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans xorg-renderproto gtk2 atk gtk-doc docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook- xml-5.0 docbook-xsl docbook-xsl gnome-doc-utils intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-list-utils p5.12-xml-parser iso-codes iso-codes libxslt libxslt py27-libxml2 rarian getopt gdk-pixbuf2 jasper jpeg tiff pango Xft2 shared-mime-info libart_lgpl libcroco libgsf gconf dbus-glib dbus orbit2 libidl policykit eggdbus gnome-vfs desktop- file-utils popt gnome-mime-data libbonobo w3m boehmgc ffmpeg XviD dirac cppunit faad2 gmake lame libogg libsdl xorg-libXext xorg-libXrandr xorg- randrproto libtheora libvorbis libvpx yasm schroedinger orc speex texi2html x264 graphviz gd2 xpm xorg-libXt xorg-libsm xorg-libice ghostscript libpaper gts netpbm jbigkit libLASi cmake urw-fonts xorg- libXaw groff psutils xorg-libXmu libopenraw boost icu libspiro lua openexr ilmbase gsed lcms libexif libgnomeui libbonoboui libgnome esound audiofile libgnomecanvas libglade2 libgnome-keyring gnome-keyring libgcrypt libgpg- error libtasn1 libmng libwmf poppler openjpeg lcms2 poppler-data py27-gtk py27-cairo py27-numpy fftw-3 py27-nose py27-distribute py27-py py27-gobject libffi gimp2 gimp2 gimp-gap MPlayer libmad lzo2 faac gimp-jp2 gimp-lqr-plugin liblqr gtk-nodoka-engine coreutils gmp gutenprint icns- gimp xsane sane-backends libusb-compat libusb }}} Perl went through like a charm, but gimp failed with error when compiling dependency "gtk2" with the following error message: {{{ ---> Fetching gtk2 Error: Please install pango without the x11 variant, by running 'port install pango -x11'. Error: Target org.macports.fetch returned: pango must be installed with the x11 variant disabled Error: Failed to install gtk2 Log for gtk2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk2/gtk2/main.log Error: The following dependencies were not installed: gimp-app gimp2 gegl babl librsvg gtk2 libart_lgpl libcroco libgsf gconf dbus-glib dbus orbit2 libidl policykit eggdbus gnome-vfs desktop-file-utils popt gnome-mime-data libbonobo w3m boehmgc ffmpeg XviD dirac cppunit faad2 gmake lame libogg libsdl xorg-libXext xorg-libXrandr xorg-randrproto libtheora libvorbis libvpx yasm schroedinger orc speex texi2html x264 graphviz gd2 xpm xorg- libXt xorg-libsm xorg-libice ghostscript libpaper gts netpbm jbigkit libLASi cmake urw-fonts xorg-libXaw groff psutils xorg-libXmu libopenraw boost icu libspiro lua openexr ilmbase gsed lcms libexif libgnomeui libbonoboui libgnome esound audiofile libgnomecanvas libglade2 libgnome- keyring gnome-keyring libgcrypt libgpg-error libtasn1 libmng libwmf poppler openjpeg lcms2 poppler-data py27-gtk py27-cairo py27-numpy fftw-3 py27-nose py27-distribute py27-py py27-gobject libffi gimp2 gimp2 gimp-gap MPlayer libmad lzo2 faac gimp-jp2 gimp-lqr-plugin liblqr gtk-nodoka-engine coreutils gmp gutenprint icns-gimp xsane sane-backends libusb-compat libusb Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} It seems that gtk2 complains about "pango" that has been installed as a gimp dependency prior to gtk2: {{{ ---> Fetching archive for pango ---> Attempting to fetch pango-1.28.4_1+quartz+x11.darwin_11.x86_64.tgz from http://packages.macports.org/pango ---> Fetching pango ---> Attempting to fetch pango-1.28.4.tar.bz2 from http://lil.fr.distfiles.macports.org/pango ---> Verifying checksum(s) for pango ---> Extracting pango ---> Applying patches to pango ---> Configuring pango ---> Building pango ---> Staging pango into destroot ---> Installing pango @1.28.4_1+quartz+x11 ---> Activating pango @1.28.4_1+quartz+x11 ---> Cleaning pango }}} The conflict here is that "pango" was installed with variant +x11, however "gtk2" wants "pango" installed with variant -x11. -- Ticket URL: <https://trac.macports.org/ticket/31148> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #38081: giblib @1.2.4 needs the autoconf fix
by MacPorts 16 Feb '13

16 Feb '13

#38081: giblib @1.2.4 needs the autoconf fix ---------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: giblib ---------------------+-------------------------------- {{{ DEBUG: Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_giblib/giblib/work/giblib-1.2.4" && autoreconf --install -fvi autoreconf: 'configure.ac' and 'configure.in' both present. autoreconf: proceeding with 'configure.ac' autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' aclocal: warning: 'configure.ac' and 'configure.in' both present. aclocal: proceeding with 'configure.ac' acinclude.m4:29: warning: underquoted definition of AC_PATH_GENERIC acinclude.m4:29: run info Automake 'Extending aclocal' acinclude.m4:29: or see http://www.gnu.org/software/automake/manual/automake.html#Extending- aclocal configure.ac:5: error: 'AM_CONFIG_HEADER': this macro is obsolete. You should use the 'AC_CONFIG_HEADERS' macro instead. /opt/local/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expanded from... configure.ac:5: the top level autom4te: /opt/local/bin/gm4 failed with exit status: 1 aclocal: error: echo failed with exit status: 1 autoreconf: aclocal failed with exit status: 1 Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_giblib/giblib/work/giblib-1.2.4" && autoreconf --install -fvi Exit code: 1 Error: org.macports.configure for port giblib returned: autoreconf failure: command execution failed }}} It's nomaintainer so anyone can fix it. -- Ticket URL: <https://trac.macports.org/ticket/38081> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3