March 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #38159: New port: gaa
by MacPorts 13 Jun '13

13 Jun '13

#38159: New port: gaa ------------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: gaa ------------------------+-------------------------------- I saw a link to gaa's [http://gaa.sourceforge.net sourceforge] scrolling by in some port's configure script (I forget which one), so I went to see if there was a port already for it, and I was surprised to find that there wasn't one yet, so I went and [https://github.com/cooljeanius/gaa forked the project to my Github], patched it up and got it to build, and then wrote a portfile for it, which is attached. -- Ticket URL: <https://trac.macports.org/ticket/38159> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #38319: openmpi @1.6.4 +gcc45 non-standard names for executables
by MacPorts 13 Jun '13

13 Jun '13

#38319: openmpi @1.6.4 +gcc45 non-standard names for executables -------------------------+-------------------------------- Reporter: dstrubbe@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Low | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: openmpi -------------------------+-------------------------------- The standard names for executables from OpenMPI are mpif90, mpif77, mpicc, mpirun, mpiexec. However, the ones provided by the openmpi port are all prefixed with "open", i.e. openmpif90 etc. I suggest this should be made clear somewhere in the port description, or alternately use the standard names (maybe the names were chosen to avoid conflict with mpich). I only discovered the actual names by reading through some tickets about this port. For example, the 'variants' output lists specifically the standard names, which are NOT the ones created by the port. openmpi has the variants: g95: build mpif77 and mpif90 using g95 * conflicts with gcc43 gcc44 gcc45 gcc46 gcc47 gcc43: build mpif77 and mpif90 using gcc43 * conflicts with g95 gcc44 gcc45 gcc46 gcc47 gcc44: build mpif77 and mpif90 using gcc44 * conflicts with g95 gcc43 gcc45 gcc46 gcc47 [+]gcc45: build mpif77 and mpif90 using gcc45 * conflicts with g95 gcc43 gcc44 gcc46 gcc47 gcc46: build mpif77 and mpif90 using gcc46 * conflicts with g95 gcc43 gcc44 gcc45 gcc47 gcc47: build mpif77 and mpif90 using gcc47 * conflicts with g95 gcc43 gcc44 gcc45 gcc46 threads: enable threads for MPI applications valgrind: enable valgrind support I am using OSX 10.8.2 and Xcode 4.6. -- Ticket URL: <https://trac.macports.org/ticket/38319> MacPorts <http://www.macports.org/> Ports system for OS X

1 10

[MacPorts] #38272: ostinato @0.5.1 needs --disable-dependency-tracking removed from its configure.universal_args
by MacPorts 12 Jun '13

12 Jun '13

#38272: ostinato @0.5.1 needs --disable-dependency-tracking removed from its configure.universal_args ----------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: haspatch | Port: ostinato ----------------------+-------------------------------- `qmake` doesn't recognize the option. (Perhaps this could be done in the qt4 portgroup? That's an issue for another ticket though). Anyway I've attached a diff for Ostinato's portfile fixing this issue. I also took this opportunity to silence a `port lint` warning by adding a license. -- Ticket URL: <https://trac.macports.org/ticket/38272> MacPorts <http://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #38280: RFE: add a qmake portgroup
by MacPorts 12 Jun '13

12 Jun '13

#38280: RFE: add a qmake portgroup ---------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.1.3 Keywords: | Port: ---------------------+-------------------------------- `qmake` currently has multiple issues that ports have to work around (as brought up in tickets #38272 and #38250): - `qmake` isn't [https://trac.macports.org/wiki/UsingTheRightCompiler UsingTheRightCompiler] (cf. comment:ticket:38250:1) - `qmake` doesn't handle `-arch` flags properly (cf. comment:ticket:38250:2) - `qmake` doesn't handle the `--disable-dependency-tracking` flag properly (cf. comment:ticket:38272:1) And I'm sure there's other things that could be done with a `qmake` portgroup, too. -- Ticket URL: <https://trac.macports.org/ticket/38280> MacPorts <http://www.macports.org/> Ports system for OS X

1 21

[MacPorts] #38240: Port request: Tiled
by MacPorts 12 Jun '13

12 Jun '13

#38240: Port request: Tiled ---------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: tiled ---------------------+-------------------------------- Tiled is an open-source, Qt-based map editor for 2D video games, using the custom .tmx map format. Links: Homepage: http://www.mapeditor.org SourceForge: http://sourceforge.net/projects/tiled/ GitHub: https://github.com/bjorn/tiled I had started writing a portfile for it myself, but I gave up on it because I find the Qt portgroup too difficult. I suppose I can paste what I have so far though: {{{ # -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c -basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4 # $Id$ PortSystem 1.0 PortGroup qt4 1.0 name tiled version 0.9.0 revision 0 categories devel games aqua platforms darwin license {BSD GPL-2 LGPLv2} maintainers nomaintainer description ${name} is a general purpose tile map editor, built to be flexible and easy to use. long_description \ ${description} In addition to its own map format, Tiled supports read/write plugins for using it with \ proprietary map formats or formats used by other editors. homepage http://www.mapeditor.org # sourceforge project name is different from port name, so not using sourceforge fetch group master_sites http://sourceforge.net/projects/tiled/files/tiled- qt/${version}/ # Have to specify the .tar.gz dist because otherwise it might grab the .dmg binary # (note: haven't actually tested this; just speculating) distname ${name}-qt-${version}.tar.gz checksums md5 e2e21a54ff17e34b49b8a330cc8b657e \ sha1 389c846bf81adf411cb004329028924432b4b2cd \ rmd160 3faf36f22187b82943640bfb833d14c617487c01 \ sha256 ffc8831be72eede7a2fca64909560124452370457214d811d6c7030e057a1a33 }}} (I did'''n't''' make this an attachment because it's incomplete and I do'''n't''' want anyone to try using it as an actual portfile as is) -- Ticket URL: <https://trac.macports.org/ticket/38240> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #38090: Please consider valkyrie in addition to valgrind.
by MacPorts 12 Jun '13

12 Jun '13

#38090: Please consider valkyrie in addition to valgrind. -------------------------------+-------------------------------- Reporter: marty@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: MacPorts Future Component: ports | Version: 2.1.3 Keywords: valgrind valkyrie | Port: -------------------------------+-------------------------------- It's really great that Macports supports Valgrind. I use it quite frequently on Linux as well as Mac thans to your efforts in keeping valgrind up to date. However, while I can use valkyrie (a graphical front-end to valgrind like ddd is to gdb) on Linux (I use Mageia 2 on Linux), I do not find it available via macports. I have downloaded and built it myself on my Mac 10.8.2 systems (via it's easy-to-use-build instructions) It'd be really helpful if Macports supported it like valgrind is. The link to it is the same as that of valgrind; valkyrie is at the bottom of the same webpage as valgrind. I hope you'll consider adding this to Mac Ports. Regards, Marty -- Ticket URL: <https://trac.macports.org/ticket/38090> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 18

[MacPorts] #34266: py25-pylons: some dependencies don't exist
by MacPorts 11 Jun '13

11 Jun '13

#34266: py25-pylons: some dependencies don't exist ------------------------------+--------------------------------------------- Reporter: jmr@… | Owner: singingwolfboy@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: py25-pylons ------------------------------+--------------------------------------------- This port depends on nonexistent ports py25-weberror and py25-tempita. -- Ticket URL: <https://trac.macports.org/ticket/34266> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #34267: Make py-weberror support Python 2.5
by MacPorts 11 Jun '13

11 Jun '13

#34267: Make py-weberror support Python 2.5 -----------------------------------------+---------------------------------- Reporter: singingwolfboy@… | Owner: perry@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: py-weberror -----------------------------------------+---------------------------------- setup.py seems to imply that it supports it as long as simplejson is installed. py25-pylons depends on this port: see #34266. -- Ticket URL: <https://trac.macports.org/ticket/34267> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #34268: unify py*-tempita ports, support Python 2.5
by MacPorts 11 Jun '13

11 Jun '13

#34268: unify py*-tempita ports, support Python 2.5 -----------------------------------------+---------------------------------- Reporter: singingwolfboy@… | Owner: perry@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: py-tempita -----------------------------------------+---------------------------------- See #34266 -- Ticket URL: <https://trac.macports.org/ticket/34268> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #35719: NEW: minpack
by MacPorts 10 Jun '13

10 Jun '13

#35719: NEW: minpack ---------------------------------+------------------------------------------ Reporter: jjstickel@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: minpack ---------------------------------+------------------------------------------ New port for minpack, the legacy fortran libraries for solving nonlinear equations and nonlinear least squares problems. Portfile will be attached. It is not a "normal" install, and so the Portfile could use some review and possible revision. I followed some of the suggestions here: [http://devernay.free.fr/hacks/netlibs.html] -- Ticket URL: <https://trac.macports.org/ticket/35719> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8