May 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #37442: py27-celery @3.0.12 DistributionNotFound error
by MacPorts 05 Jun '14

05 Jun '14

#37442: py27-celery @3.0.12 DistributionNotFound error ----------------------+-------------------------------- Reporter: marcop@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: py-celery ----------------------+-------------------------------- I installed py27-celery @3.0.12. py27-amqp @1.2.0 is installed as a dependency. When I launch celery I get the error below. It seems that celery is looking for an older version of amqp. I installed a compatible version of amqp (1.0.2) but unfortunately I wasn't able to solve the problem. As an attachment I provide the celeryconfig.py I'm using. {{{ Traceback (most recent call last): File "/opt/local/bin/celeryd", line 5, in <module> from pkg_resources import load_entry_point File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7 /site-packages/pkg_resources.py", line 2811, in <module> parse_requirements(__requires__), Environment() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7 /site-packages/pkg_resources.py", line 588, in resolve raise DistributionNotFound(req) pkg_resources.DistributionNotFound: amqp>=1.0.5,<1.1.0 }}} Thank you for support and suggestions. Marco -- Ticket URL: <https://trac.macports.org/ticket/37442> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #36435: mkoctfile... configure: error: mkoctfile is not installed
by MacPorts 05 Jun '14

05 Jun '14

#36435: mkoctfile... configure: error: mkoctfile is not installed -----------------------------------+-------------------------------- Reporter: chcorson@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: mkoctfile swig-octave | Port: Octave -----------------------------------+-------------------------------- I tried to update all packages under ports with: sudo port upgrade outdated (run on Oct 2nd 2012) Octave failed to build complaining that mkoctfile does not exist. From the logfile for swig-octave, the first error encountered was: mkoctfile... configure: error: mkoctfile is not installed See more detail of logfile below. Charles :info:configure checking for octave... octave :info:configure checking for mkoctfile... configure: error: mkoctfile is not installed :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_swig /swig-octave/work/swig-2.0.8" && ./configure --prefix=/opt/local --without-allegrocl --without-chicken --without-clisp --without-csharp --without-gcj --without-go --without-guile --without-java --without-lua --without-mzscheme --without-ocaml --with-octave --without-perl5 --without-php --without-php --without-pike --without-python --without-r --without-ruby --without-tcl :info:configure Exit code: 1 -- Ticket URL: <https://trac.macports.org/ticket/36435> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #32842: swig-python build fails for non-default build_arch
by MacPorts 05 Jun '14

05 Jun '14

#32842: swig-python build fails for non-default build_arch -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: kevin@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: swig-python -------------------------------------+-------------------------------------- {{{ ld: warning: in /i386-10.6-mp/lib/libpcre.dylib, file was built for i386 which is not the architecture being linked (x86_64) Undefined symbols: "_pcre_version", referenced from: _Swig_pcre_version in misc.o (maybe you meant: _Swig_pcre_version) "_pcre_compile", referenced from: _Swig_string_regex in misc.o _Swig_name_regexmatch_value in naming.o "_pcre_free", referenced from: _Swig_string_regex in misc.o _Swig_string_regex in misc.o _Swig_name_regexmatch_value in naming.o "_pcre_exec", referenced from: _Swig_string_regex in misc.o _Swig_name_regexmatch_value in naming.o ld: symbol(s) not found }}} -- Ticket URL: <https://trac.macports.org/ticket/32842> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #21294: Enable cffi support in swig?
by MacPorts 05 Jun '14

05 Jun '14

#21294: Enable cffi support in swig? ------------------------------------+--------------------------------------- Reporter: glen.henshaw@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Keywords: swig, cffi | Port: swig 1.3.40 ------------------------------------+--------------------------------------- Swig 1.3.40 supports cffi, but the port does not have a variant for it, and the +universal variant does not seem to do anything. Would it be possible to enable cffi support? Is it possible to enable support for the other languages swig supports but for which there are no port variants? The built-in OSX swig does support cffi, but the implementation is quite old. -- Ticket URL: <http://trac.macports.org/ticket/21294> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #31384: Cannot install pike using macports
by MacPorts 05 Jun '14

05 Jun '14

#31384: Cannot install pike using macports -------------------------------------+-------------------------------------- Reporter: peymandelshad@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: -------------------------------------+-------------------------------------- Macports fail to install pike. Here's the log: ---> Computing dependencies for pike[[BR]] ---> Fetching archive for pike[[BR]] ---> Attempting to fetch pike-7.6.112_3.darwin_10.x86_64.tbz2 from http://packages.macports.org/pike [[BR]] ---> Fetching pike[[BR]] ---> Verifying checksum(s) for pike[[BR]] ---> Extracting pike[[BR]] ---> Applying patches to pike[[BR]] ---> Configuring pike[[BR]] ---> Building pike[[BR]] Error: Target org.macports.build returned: shell command failed (see log for details)[[BR]] Log for pike is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pike/pike/main.log[[BR]] Error: Status 1 encountered during processing.[[BR]] To report a bug, see <http://guide.macports.org/#project.tickets>[[BR]] -- Ticket URL: <https://trac.macports.org/ticket/31384> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #37846: gcc47 cannot compile valid code because deficient linker cctools' as
by MacPorts 03 Jun '14

03 Jun '14

#37846: gcc47 cannot compile valid code because deficient linker cctools' as ----------------------------------+-------------------------------- Reporter: wd11@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: MacPorts 2.1.3 Component: ports | Version: 2.1.2 Keywords: deficient dependency | Port: gcc47 ----------------------------------+-------------------------------- The gcc groups of compiler ports (gcc47 etc) depend on cctools' for the linker 'as'. However, that linker is deficient: it doesn't know about the AVX instruction set supported by Intel's sandy-bridge and ivy-bridge processors, which are used in the recent mac books. As a consequence, gcc cannot compile valid code, such as the attached c++ program (note: compile with the -march=native option on a intel corei7 chip) Note that this is a known issue (http://stackoverflow.com/questions/9840207/how-to-use-avx-pclmulqdq-on- mac-os-x-lion), but the suggested solution is extremely inelegant and does not mesh well with macports updates. Instead, this problem should solved at its heart, i.e. by shipping the gcc ports with a better linker (or by convincing cctools to ship a useful linker). -- Ticket URL: <https://trac.macports.org/ticket/37846> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #39079: gdb-apple @1822: Build the MacsBug plugin
by MacPorts 03 Jun '14

03 Jun '14

#39079: gdb-apple @1822: Build the MacsBug plugin -------------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: gdb-apple -------------------------+-------------------------------- One of the things that makes Apple's version of gdb that they ship with Xcode worth using over the FSF gdb is the MacsBug plugin that comes with Apple's gdb: http://opensource.apple.com/source/gdb/gdb-1824/macsbug/ However, the MacPort's port for gdb-apple doesn't include this plugin. Could it be updated to fix this? -- Ticket URL: <https://trac.macports.org/ticket/39079> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #37721: New port: port-depgraph
by MacPorts 03 Jun '14

03 Jun '14

#37721: New port: port-depgraph ------------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ------------------------+-------------------------------- From the contrib folder on svn. Warning: I haven't tested or linted the portfile, because I'm on a school computer that I can't install MacPorts on. Somebody might want to test and lint it for me before committing it. -- Ticket URL: <https://trac.macports.org/ticket/37721> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #37604: Error: Processing of port octave-devel failed
by MacPorts 03 Jun '14

03 Jun '14

#37604: Error: Processing of port octave-devel failed ------------------------+-------------------------------- Reporter: jmercie1@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ------------------------+-------------------------------- seems to be a problem I am not sure how to fix.... here is the terminal window: ---> Computing dependencies for octave-devel ---> Dependencies to be installed: ghostscript xorg-libXext xorg-libX11 xorg-libxcb doxygen graphviz gd2 xpm xorg-libXt libLASi pango Xft2 xrender cairo xorg-xcb-util gobject-introspection xorg-libXaw groff xorg-libXmu texlive texlive-basic texlive-bin poppler xorg-libXp texlive- documentation-base texlive-bin-extra dvipng latexmk texlive-latex pdfjam texlive-latex-recommended pgf texlive-context texlive-fonts-recommended texlive-math-extra texlive-metapost texlive-xetex texlive-generic- recommended texlive-documentation-english texlive-fontutils lcdf-typetools ps2eps texlive-lang-czechslovak texlive-lang-dutch texlive-lang-english texlive-lang-french texlive-lang-german texlive-lang-italian texlive-lang- polish texlive-lang-portuguese texlive-lang-spanish texlive-luatex texlive-latex-extra texlive-pictures gnuplot Error: The following dependencies were not installed: ghostscript xorg- libXext xorg-libX11 xorg-libxcb doxygen graphviz gd2 xpm xorg-libXt libLASi pango Xft2 xrender cairo xorg-xcb-util gobject-introspection xorg- libXaw groff xorg-libXmu texlive texlive-basic texlive-bin poppler xorg- libXp texlive-documentation-base texlive-bin-extra dvipng latexmk texlive- latex pdfjam texlive-latex-recommended pgf texlive-context texlive-fonts- recommended texlive-math-extra texlive-metapost texlive-xetex texlive- generic-recommended texlive-documentation-english texlive-fontutils lcdf- typetools ps2eps texlive-lang-czechslovak texlive-lang-dutch texlive-lang- english texlive-lang-french texlive-lang-german texlive-lang-italian texlive-lang-polish texlive-lang-portuguese texlive-lang-spanish texlive- luatex texlive-latex-extra texlive-pictures gnuplot To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port octave-devel failed ---- I have uploaded the log ---- -- Ticket URL: <https://trac.macports.org/ticket/37604> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 23

[MacPorts] #39197: New port: RStudio
by MacPorts 02 Jun '14

02 Jun '14

#39197: New port: RStudio ---------------------------+-------------------------------- Reporter: kjell.konis@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: ---------------------------+-------------------------------- RStudio is a powerful IDE for R. Note that as part of the build process, RStudio downloads and installs 3 dependencies. I put this is the post-extract phase. The 3 pieces are (1) RStudio dictionaries (not sure about license) (2) GWT (Apache License 2.0) (3) Mathjax (Apache License 2.0) These are used in a way where it is not at all convenient to put them in separate (or even sub) ports. -- Ticket URL: <https://trac.macports.org/ticket/39197> MacPorts <http://www.macports.org/> Ports system for OS X

1 12