June 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #39491: moreutils conflicts with parallel
by MacPorts 27 Jul '14

27 Jul '14

#39491: moreutils conflicts with parallel ---------------------+-------------------------------- Reporter: david@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: moreutils ---------------------+-------------------------------- The "parallel" port installs GNU parallel. "moreutils" also installs a utility called "parallel", but it is incompatible with (and less flexible than) GNU parallel. I want to be able to install GNU parallel at the same time as the other utilities from moreutils (like "ts"). Here's how other OSs solve this conflict: * Fedora doesn't provide the "parallel" utility at all in the moreutils package (I, personally, would be happy with this choice). * Ubuntu (and maybe Debian as well?) disables the "parallel" utility from moreutils if you install GNU parallel when moreutils is already installed (I would also be happy with this; does macports allow doing this?). Another option would be to add a "-parallel" variant to the "moreutils" port, and mark it so that it doesn't conflict with the "parallel" port. Is it possible to mark only a particular variant of a port as conflicting? Prior tickets: Ticket #30972 asked for this conflict to be resolved, but instead the two ports were explicitly marked as conflicting. -- Ticket URL: <https://trac.macports.org/ticket/39491> MacPorts <http://www.macports.org/> Ports system for OS X

1 11

[MacPorts] #39504: moreutils: Install man pages by default
by MacPorts 27 Jul '14

27 Jul '14

#39504: moreutils: Install man pages by default ---------------------+-------------------------------- Reporter: david@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: moreutils ---------------------+-------------------------------- Most other ports for command-line utilities install the corresponding man pages by default. I don't know why moreutils *has* a "doc" variant, but at least it should be enabled by default. -- Ticket URL: <https://trac.macports.org/ticket/39504> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #39081: error during docbook-xml-5.0 deactivation
by MacPorts 26 Jul '14

26 Jul '14

#39081: error during docbook-xml-5.0 deactivation --------------------+----------------------------- Reporter: ram@… | Owner: lockhart@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: docbook-xml-5.0 --------------------+----------------------------- When I uninstall `docbook-xml-5.0` the following message is displayed: {{{ ---> Deactivating docbook-xml-5.0 @5.0_1 Error: org.macports.deactivate for port docbook-xml-5.0 returned: command execution failed Please see the log file for port docbook-xml-5.0 for details: /opt/local/var/macports/logs /_opt_local_var_macports_registry_portfiles_docbook-xml-5.0_5.0_1/docbook- xml-5.0/main.log Warning: Failed to execute portfile from registry for docbook-xml-5.0 @5.0_1 ---> Uninstalling docbook-xml-5.0 @5.0_1 ---> Cleaning docbook-xml-5.0 }}} I can't obviously look at the log file as it's been removed during the clean process. What is causing this error? -- Ticket URL: <https://trac.macports.org/ticket/39081> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #37165: sgml-common: xmlcatmgr: failed to create `/opt/local/etc/xml/catalog': Permission denied
by MacPorts 26 Jul '14

26 Jul '14

#37165: sgml-common: xmlcatmgr: failed to create `/opt/local/etc/xml/catalog': Permission denied --------------------------+------------------------- Reporter: ryandesign@… | Owner: lockhart@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: sgml-common --------------------------+------------------------- Building sgml-common fails with the above error. /opt/local/etc/xml exists and is an empty directory. -- Ticket URL: <https://trac.macports.org/ticket/37165> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #36526: docbook-xml-5.0 deactivate errors
by MacPorts 26 Jul '14

26 Jul '14

#36526: docbook-xml-5.0 deactivate errors --------------------+----------------------------- Reporter: snc@… | Owner: lockhart@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.99 Keywords: | Port: docbook-xml-5.0 --------------------+----------------------------- When performing a `deactivate active`, docbook-xml-5.0 produced errors: {{{ :info:deactivate xmlcatmgr: no matching entry for = `/opt/local/share/xml/docbook/5.0/docbook.cat' of type `CATALOG' :info:deactivate Command failed: xmlcatmgr -s -c = /opt/local/etc/sgml/catalog remove CATALOG = /opt/local/share/xml/docbook/5.0/docbook.cat }}} -- Ticket URL: <https://trac.macports.org/ticket/36526> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #39330: nethack @3.4.3: Add descriptions for the variants
by MacPorts 25 Jul '14

25 Jul '14

#39330: nethack @3.4.3: Add descriptions for the variants -------------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: nethack -------------------------+-------------------------------- I'd like to reinstall my copy of nethack with some variants enabled this time, but I currently can't tell what the variants actually do because they don't have any descriptions. It'd be useful if they ''did'' actually have descriptions. -- Ticket URL: <https://trac.macports.org/ticket/39330> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #37328: nethack @3.4.3 +x11 Build failure
by MacPorts 25 Jul '14

25 Jul '14

#37328: nethack @3.4.3 +x11 Build failure ------------------------+-------------------------------- Reporter: nurblieh@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ------------------------+-------------------------------- nethack with the x11 variant selecetd fails to build, as the X11 headers can not be found. The bug is that the build.args-appends directive in the Portfile overrides the Makefile's CFLAGS that the x11 variant patches in. Removing the build.args-apend directive from the Portfile fixes the issue and is, largely unnecessary. (O vs O2 though...) This is from the x11 Makefile patch, {{{ -CFLAGS = -O -I../include +CFLAGS = -O -I../include -I/usr/X11R6/include }}} This is what exists in build.args-append, {{{ build.args-append CFLAGS="-O2 -I../include" }}} So the {{{-I/usr/X11R6/include}}} never gets respected. Attached is a working diff. Xcode 4.4; Mac OS X 10.8.2 -- Ticket URL: <https://trac.macports.org/ticket/37328> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #22167: nethack runs as root
by MacPorts 25 Jul '14

25 Jul '14

#22167: nethack runs as root ---------------------------------------+------------------------------------ Reporter: adam.gc.watkins@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: nethack ---------------------------------------+------------------------------------ Nethack runs as root, via setuid on '/opt/local/share/nethackdir/nethack'. It might sensible to setgid as 'games' or similar and set permissions appropriately elsewhere, but to run nethack as root by default is insane from a security perspective. -- Ticket URL: <http://trac.macports.org/ticket/22167> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #26801: Scons 1.2.0
by MacPorts 24 Jul '14

24 Jul '14

#26801: Scons 1.2.0 ----------------------------------------------------+----------------------- Reporter: arthur.teimourian@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: ----------------------------------------------------+----------------------- Hello, can you add Scons Version 1.2.0? I need it for a simulation program, which doesn't work with newer scons versions. thank you! arthur -- Ticket URL: <https://trac.macports.org/ticket/26801> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #36474: Perl 5.12 Config.pm gets wrong gcc
by MacPorts 24 Jul '14

24 Jul '14

#36474: Perl 5.12 Config.pm gets wrong gcc ----------------------------+-------------------------------- Reporter: macports.org@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ----------------------------+-------------------------------- On a freshly formatted Macbook Pro, SnowLeopard, with Xcode 4.2, I attempted 'port install arb'. It died, and I applied the patch (gcc -O3 instead of gcc -O4) found here: http://bugs.arb-home.de/changeset/8675/trunk/Makefile I tried again, and it died in a new way: /usr/bin/gcc-4.2: No such file or directory It was building in the 'PERL2ARB' directory, and it got the CC variable from /opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/Config.pm It appears that the perl5.12 port needs to find /usr/bin/llvm-gcc-4.2 during installation. -- Ticket URL: <https://trac.macports.org/ticket/36474> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 16