July 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #34247: libcdio 0.83 misses osx driver in Lion and possibly Snow Leopard
by MacPorts 14 Oct '14

14 Oct '14

#34247: libcdio 0.83 misses osx driver in Lion and possibly Snow Leopard ---------------------------------+------------------------------------------ Reporter: claunia@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: ---------------------------------+------------------------------------------ libcdio 0.83 default configure misses osx driver because a bad search in configure script. zeus:~ claunia$ time sudo port install libcdio Warning: port definitions are more than two weeks old, consider using selfupdate ---> Computing dependencies for libcdio ---> Dependencies to be installed: libcddb ---> Fetching archive for libcddb ---> Attempting to fetch libcddb-1.3.2_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/libcddb ---> Attempting to fetch libcddb-1.3.2_1.darwin_11.x86_64.tbz2.rmd160 from http://packages.macports.org/libcddb ---> Installing libcddb @1.3.2_1 ---> Activating libcddb @1.3.2_1 ---> Cleaning libcddb ---> Fetching archive for libcdio ---> Attempting to fetch libcdio-0.83_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libcdio ---> Attempting to fetch libcdio-0.83_0.darwin_11.x86_64.tbz2.rmd160 from http://packages.macports.org/libcdio ---> Installing libcdio @0.83_0 ---> Activating libcdio @0.83_0 ---> Cleaning libcdio zeus:~ claunia$ cd-drive cd-drive version 0.83 x86_64-apple-darwin11.3.0 Copyright (c) 2003, 2004, 2005, 2007, 2008, 2011 R. Bernstein This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. No loaded CD-ROM device accessible. Drivers available... cdrdao (TOC) disk image driver bin/cuesheet disk image driver Nero NRG disk image driver Problem comes from line #16678 in configure script, it says: ''darwin6*|darwin7*|darwin8*|darwin9*)'' missing darwin10 (Mac OS X 10.6) and darwin11 (Mac OS X 10.7) changing it to ''darwin6*|darwin7*|darwin8*|darwin9*|darwin10*|darwin11*)'' makes configure to try to use the osx driver: ''configure: Using CD-ROM drivers : cdrdao, BIN/CUE, NRG, Darwin'' But then a change needs to be done on osx.c file. I have checked with OS X 10.4, 10.5 and 10.6 SDKs and the same changes that apply to 10.7 should apply to them. Also if the only present drive is a bluray one, it is not detected. (Simply adding IOBDMediaClass to the search is not working, I'm investingating). I have attached a patch, and will send the same bug to libcdio mainstream. -- Ticket URL: <https://trac.macports.org/ticket/34247> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #36538: libdc1394: bump to 2.2.0 + apply patch for buggy OSX firewire stack
by MacPorts 13 Oct '14

13 Oct '14

#36538: libdc1394: bump to 2.2.0 + apply patch for buggy OSX firewire stack ---------------------------------+-------------------------------- Reporter: frederic.devernay@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: libdc1394 ---------------------------------+-------------------------------- bump to 2.2.0 is trivial. checksums sha1 7e831258a65e7e111a9d52d8062aec6d28a1e4c4 \ rmd160 41a8bc28824a58bcdfdbd3226adf4b0c88555574 adding the attached patch suppresses many error messages from using libdc1394 with a firewire camera: # fix issue due to bug in OSX Firewire stack # http://permalink.gmane.org/gmane.comp.multimedia.libdc1394.devel/517 patchfiles libdc1394-macosx-status.patch -- Ticket URL: <https://trac.macports.org/ticket/36538> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 11

[MacPorts] #38686: py24-readline and py25-readline: builds fail because /Developer/usr/bin/llvm-gcc-4.2 does not exist
by MacPorts 12 Oct '14

12 Oct '14

#38686: py24-readline and py25-readline: builds fail because /Developer/usr/bin /llvm-gcc-4.2 does not exist ----------------------------+----------------------------------------- Reporter: eric.lebigot@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: py24-readline py25-readline ----------------------------+----------------------------------------- py24-readline and py25-readline fail to build because /Developer/usr/bin /llvm-gcc-4.2 does not exist. -- Ticket URL: <https://trac.macports.org/ticket/38686> MacPorts <http://www.macports.org/> Ports system for OS X

1 8

[MacPorts] #38788: Do s3cmd and rdiff-backup really need to be restricted to python26?
by MacPorts 12 Oct '14

12 Oct '14

#38788: Do s3cmd and rdiff-backup really need to be restricted to python26? ----------------------+-------------------------------- Reporter: weasel@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: rdiff-backup ----------------------+-------------------------------- Is there any particular reason why s3cmd and rdiff-backup still depend on python26 and py26-xattr, respectively? -- Ticket URL: <https://trac.macports.org/ticket/38788> MacPorts <http://www.macports.org/> Ports system for OS X

1 12

[MacPorts] #30797: mutt doesn't allow for rootless install
by MacPorts 12 Oct '14

12 Oct '14

#30797: mutt doesn't allow for rootless install ---------------------------------+------------------------------------------ Reporter: nefar@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.1 Keywords: | Port: mutt ---------------------------------+------------------------------------------ ``` chmod 2755 /Users/daniel/local/macports/var/macports/build/_Users_daniel_local_macports_var_macports_sources_rsync.macports.org_release_ports_mail_mutt/mutt/work/destroot/Users/daniel/local/macports/bin/mutt_dotlock || \ { echo "Can't fix mutt_dotlock's permissions!" >&2 ; exit 1 ; } \ fi chgrp: you are not a member of group mail Can't fix mutt_dotlock's permissions! make[3]: *** [install-exec-local] Error 1 ``` -- Ticket URL: <https://trac.macports.org/ticket/30797> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #35550: mutt-devel: non-root install fails
by MacPorts 12 Oct '14

12 Oct '14

#35550: mutt-devel: non-root install fails ---------------------------------+------------------------------------------ Reporter: nefar@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: mutt-devel ---------------------------------+------------------------------------------ {{{ chgrp mail /Users/daniel/local/macports/bin/mutt_dotlock chgrp: you are not a member of group mail Can't fix mutt_dotlock's permissions! make: *** [install] Error 2 }}} -- Ticket URL: <https://trac.macports.org/ticket/35550> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #38014: mutt-devel @1.5.21 Variants not being built as specified
by MacPorts 12 Oct '14

12 Oct '14

#38014: mutt-devel @1.5.21 Variants not being built as specified ----------------------------+-------------------------------- Reporter: macports.org@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: mutt-devel ----------------------------+-------------------------------- Variants are not being included as specified when building '''{{{mutt- devel}}}'''. I first noticed this when attempting to build and install '''{{{mutt-devel}}}''' with the variants '''{{{+compress+deepif+date_conditional+debug+imap+smtp+sasl+ssl++xlabel+gdbm+headercache+idn}}}''', but noticed that '''{{{+headercache+idn}}}''' were not being included in the resulting build. This is also demonstrable with a different/smaller set of variants. See the example command history below. {{{ $ sudo port installed mutt-devel The following ports are currently installed: mutt-devel @1.5.21_2+gdbm+imap+pop+smtp (active) $ sudo port uninstall mutt-devel ---> Deactivating mutt-devel @1.5.21_2+gdbm+imap+pop+smtp ---> Cleaning mutt-devel ---> Uninstalling mutt-devel @1.5.21_2+gdbm+imap+pop+smtp ---> Cleaning mutt-devel $ sudo port clean mutt-devel ---> Cleaning mutt-devel $ sudo port install mutt-devel +imap+smtp++ssl+sasl+idn ---> Computing dependencies for mutt-devel ---> Fetching archive for mutt-devel ---> Attempting to fetch mutt- devel-1.5.21_2+gdbm+imap+pop+smtp.darwin_12.x86_64.tbz2 from http://packages.macports.org/mutt-devel ---> Attempting to fetch mutt- devel-1.5.21_2+gdbm+imap+pop+smtp.darwin_12.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/mutt-devel ---> Attempting to fetch mutt- devel-1.5.21_2+gdbm+imap+pop+smtp.darwin_12.x86_64.tbz2 from http://lil.fr.packages.macports.org/mutt-devel ---> Fetching distfiles for mutt-devel ---> Verifying checksum(s) for mutt-devel ---> Extracting mutt-devel ---> Applying patches to mutt-devel ---> Configuring mutt-devel ---> Building mutt-devel ---> Staging mutt-devel into destroot ---> Installing mutt-devel @1.5.21_2+gdbm+imap+pop+smtp ---> Activating mutt-devel @1.5.21_2+gdbm+imap+pop+smtp ---> Cleaning mutt-devel ---> Updating database of binaries: 100.0% ---> Scanning binaries for linking errors: 100.0% ---> No broken files found. $ sudo port installed mutt-devel The following ports are currently installed: mutt-devel @1.5.21_2+gdbm+imap+pop+smtp (active) }}} Note that '''{{{+ssl+sasl}}}''' are specified for inclusion and '''{{{+pop}}}''' is not, yet the resulting build is '''{{{+gdbm+imap+pop+smtp}}}''' and lacks '''{{{+ssl+sasl}}}'''. The output of "'''{{{port variants mutt-devel}}}'''" does not indicate dependencies which may be causing this. {{{ mutt-devel has the variants: compress: Compressed folders date_conditional: Allow the format of dates in the index to vary based on how recent the message is * requires deepif db4: Use Berkeley DB database * conflicts with gdbm qdbm tokyocabinet debug: Debugging support deepif: Allow nested if-else sequences in strings gdbm: Use GNU dbm database * conflicts with db4 qdbm tokyocabinet gnuregex: Use the GNU regular expression library gpgme: Enable GPGME crypto support headercache: Enable header caching (requires gdbm, qdbm, or tokyocabinet) * conflicts with db4 idn: Internationalized Domain Name support [+]imap: IMAP support nntp: NNTP support * conflicts with sidebar [+]pop: POP support qdbm: Use QDBM database * conflicts with db4 gdbm tokyocabinet sasl: Simple Authentication and Security Layer support sidebar: Add a sidebar with a list of folders * conflicts with nntp smtp: Include internal SMTP relay support ssl: Secure Sockets Layer support tokyocabinet: Use Tokyo Cabinet database * conflicts with db4 gdbm qdbm trash: Add a Trash folder universal: Build for multiple architectures xlabel: Custom message-tagging - X-Label: }}} -- Ticket URL: <https://trac.macports.org/ticket/38014> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 10

[MacPorts] #24275: mutt-devel @1.5.20_2 fails to install with +sasl
by MacPorts 12 Oct '14

12 Oct '14

#24275: mutt-devel @1.5.20_2 fails to install with +sasl ------------------------------+--------------------------------------------- Reporter: bill@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: ------------------------------+--------------------------------------------- When installing mutt-devel on OSX 10.6.2 I get the following: sudo port install -d mutt-devel +gdbm+headercache+imap+pop+smtp+ssl+sasl+sidebar+universal ---> Computing dependencies for mutt-devel ---> Configuring mutt-devel Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.20" && ./configure --prefix=/opt/local --disable-dependency-tracking --disable-warnings --mandir=/opt/local/share/man --with-docdir=/opt/local/share/doc/mutt --with-libiconv-prefix=/opt/local --with-curses=/opt/local --enable-pop --enable-imap --with-ssl=/opt/local --with-sasl=/opt/local --enable-hcache --enable-gdbm --without-bdb --without-qdbm --without-tokyocabinet --enable-smtp " returned error 1 Command output: checking getopt.h presence... yes checking for getopt.h... yes checking for snprintf... yes checking for vsnprintf... yes checking whether your system's snprintf is C99 compliant... yes checking whether your system's vsnprintf is C99 compliant... yes checking for va_copy... va_copy checking for ftruncate... yes checking for strftime... yes checking for fchdir... yes checking for regcomp... yes checking whether your system's regexp library is completely broken... no checking where new mail is stored... /var/mail checking if /var/mail is world writable... no checking if /var/mail is group writable... yes checking where to put the documentation... /opt/local/share/doc/mutt checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for socklen_t... yes checking for gethostent... yes checking for setsockopt... yes checking for getaddrinfo... yes checking for deflate in -lz... yes checking for X509_new in -lcrypto... yes checking for SSL_new in -lssl... yes checking for RAND_status... yes checking for RAND_egd... yes checking for sasl_client_init in -lsasl2... no configure: error: could not find libsasl2 Installation without +sasl completes normally. -- Ticket URL: <http://trac.macports.org/ticket/24275> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #39044: [python33] [3.3.1] [Processing of port python33 failed]
by MacPorts 11 Oct '14

11 Oct '14

#39044: [python33] [3.3.1] [Processing of port python33 failed] ---------------------------+-------------------------------- Reporter: fabiograetz@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: ---------------------------+-------------------------------- Hi, i tried to install python3.3 but the installation failed, I have no idea why. I use OS 10.7.5 and Xcode Version 4.1 Please help me :) F -- Ticket URL: <https://trac.macports.org/ticket/39044> MacPorts <http://www.macports.org/> Ports system for OS X

1 6

[MacPorts] #38417: mapnik @ 2.1.0, Revision 3 +osm +cairo: Build error
by MacPorts 11 Oct '14

11 Oct '14

#38417: mapnik @ 2.1.0, Revision 3 +osm +cairo: Build error ----------------------+-------------------------------- Reporter: fitfot@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.0 Keywords: | Port: mapnik ----------------------+-------------------------------- Build failing. My system: OS X Lion Xcode Version 4.5.2 (4G2008a) gcc version 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) (Don't know if this is the one Macports uses for compilation, though). -- Ticket URL: <https://trac.macports.org/ticket/38417> MacPorts <http://www.macports.org/> Ports system for OS X

1 5